617 lines
15 KiB
C
617 lines
15 KiB
C
|
/*
|
|||
|
* Copyright (C) 2014 STMicroelectronics – All Rights Reserved
|
|||
|
*
|
|||
|
* STMicroelectronics PHY driver MiPHY365 (for SoC STiH416).
|
|||
|
*
|
|||
|
* Authors: Alexandre Torgue <alexandre.torgue@st.com>
|
|||
|
* Lee Jones <lee.jones@linaro.org>
|
|||
|
*
|
|||
|
* This program is free software; you can redistribute it and/or modify
|
|||
|
* it under the terms of the GNU General Public License version 2, as
|
|||
|
* published by the Free Software Foundation.
|
|||
|
*
|
|||
|
*/
|
|||
|
|
|||
|
#include <linux/platform_device.h>
|
|||
|
#include <linux/io.h>
|
|||
|
#include <linux/kernel.h>
|
|||
|
#include <linux/module.h>
|
|||
|
#include <linux/of.h>
|
|||
|
#include <linux/of_platform.h>
|
|||
|
#include <linux/clk.h>
|
|||
|
#include <linux/phy/phy.h>
|
|||
|
#include <linux/delay.h>
|
|||
|
#include <linux/mfd/syscon.h>
|
|||
|
#include <linux/regmap.h>
|
|||
|
|
|||
|
#include <dt-bindings/phy/phy-miphy365x.h>
|
|||
|
|
|||
|
#define HFC_TIMEOUT 100
|
|||
|
|
|||
|
#define SYSCFG_2521 0x824
|
|||
|
#define SYSCFG_2522 0x828
|
|||
|
#define SYSCFG_PCIE_SATA_MASK BIT(1)
|
|||
|
#define SYSCFG_PCIE_SATA_POS 1
|
|||
|
|
|||
|
/* MiPHY365x register definitions */
|
|||
|
#define RESET_REG 0x00
|
|||
|
#define RST_PLL BIT(1)
|
|||
|
#define RST_PLL_CAL BIT(2)
|
|||
|
#define RST_RX BIT(4)
|
|||
|
#define RST_MACRO BIT(7)
|
|||
|
|
|||
|
#define STATUS_REG 0x01
|
|||
|
#define IDLL_RDY BIT(0)
|
|||
|
#define PLL_RDY BIT(1)
|
|||
|
#define DES_BIT_LOCK BIT(2)
|
|||
|
#define DES_SYMBOL_LOCK BIT(3)
|
|||
|
|
|||
|
#define CTRL_REG 0x02
|
|||
|
#define TERM_EN BIT(0)
|
|||
|
#define PCI_EN BIT(2)
|
|||
|
#define DES_BIT_LOCK_EN BIT(3)
|
|||
|
#define TX_POL BIT(5)
|
|||
|
|
|||
|
#define INT_CTRL_REG 0x03
|
|||
|
|
|||
|
#define BOUNDARY1_REG 0x10
|
|||
|
#define SPDSEL_SEL BIT(0)
|
|||
|
|
|||
|
#define BOUNDARY3_REG 0x12
|
|||
|
#define TX_SPDSEL_GEN1_VAL 0
|
|||
|
#define TX_SPDSEL_GEN2_VAL 0x01
|
|||
|
#define TX_SPDSEL_GEN3_VAL 0x02
|
|||
|
#define RX_SPDSEL_GEN1_VAL 0
|
|||
|
#define RX_SPDSEL_GEN2_VAL (0x01 << 3)
|
|||
|
#define RX_SPDSEL_GEN3_VAL (0x02 << 3)
|
|||
|
|
|||
|
#define PCIE_REG 0x16
|
|||
|
|
|||
|
#define BUF_SEL_REG 0x20
|
|||
|
#define CONF_GEN_SEL_GEN3 0x02
|
|||
|
#define CONF_GEN_SEL_GEN2 0x01
|
|||
|
#define PD_VDDTFILTER BIT(4)
|
|||
|
|
|||
|
#define TXBUF1_REG 0x21
|
|||
|
#define SWING_VAL 0x04
|
|||
|
#define SWING_VAL_GEN1 0x03
|
|||
|
#define PREEMPH_VAL (0x3 << 5)
|
|||
|
|
|||
|
#define TXBUF2_REG 0x22
|
|||
|
#define TXSLEW_VAL 0x2
|
|||
|
#define TXSLEW_VAL_GEN1 0x4
|
|||
|
|
|||
|
#define RXBUF_OFFSET_CTRL_REG 0x23
|
|||
|
|
|||
|
#define RXBUF_REG 0x25
|
|||
|
#define SDTHRES_VAL 0x01
|
|||
|
#define EQ_ON3 (0x03 << 4)
|
|||
|
#define EQ_ON1 (0x01 << 4)
|
|||
|
|
|||
|
#define COMP_CTRL1_REG 0x40
|
|||
|
#define START_COMSR BIT(0)
|
|||
|
#define START_COMZC BIT(1)
|
|||
|
#define COMSR_DONE BIT(2)
|
|||
|
#define COMZC_DONE BIT(3)
|
|||
|
#define COMP_AUTO_LOAD BIT(4)
|
|||
|
|
|||
|
#define COMP_CTRL2_REG 0x41
|
|||
|
#define COMP_2MHZ_RAT_GEN1 0x1e
|
|||
|
#define COMP_2MHZ_RAT 0xf
|
|||
|
|
|||
|
#define COMP_CTRL3_REG 0x42
|
|||
|
#define COMSR_COMP_REF 0x33
|
|||
|
|
|||
|
#define COMP_IDLL_REG 0x47
|
|||
|
#define COMZC_IDLL 0x2a
|
|||
|
|
|||
|
#define PLL_CTRL1_REG 0x50
|
|||
|
#define PLL_START_CAL BIT(0)
|
|||
|
#define BUF_EN BIT(2)
|
|||
|
#define SYNCHRO_TX BIT(3)
|
|||
|
#define SSC_EN BIT(6)
|
|||
|
#define CONFIG_PLL BIT(7)
|
|||
|
|
|||
|
#define PLL_CTRL2_REG 0x51
|
|||
|
#define BYPASS_PLL_CAL BIT(1)
|
|||
|
|
|||
|
#define PLL_RAT_REG 0x52
|
|||
|
|
|||
|
#define PLL_SSC_STEP_MSB_REG 0x56
|
|||
|
#define PLL_SSC_STEP_MSB_VAL 0x03
|
|||
|
|
|||
|
#define PLL_SSC_STEP_LSB_REG 0x57
|
|||
|
#define PLL_SSC_STEP_LSB_VAL 0x63
|
|||
|
|
|||
|
#define PLL_SSC_PER_MSB_REG 0x58
|
|||
|
#define PLL_SSC_PER_MSB_VAL 0
|
|||
|
|
|||
|
#define PLL_SSC_PER_LSB_REG 0x59
|
|||
|
#define PLL_SSC_PER_LSB_VAL 0xf1
|
|||
|
|
|||
|
#define IDLL_TEST_REG 0x72
|
|||
|
#define START_CLK_HF BIT(6)
|
|||
|
|
|||
|
#define DES_BITLOCK_REG 0x86
|
|||
|
#define BIT_LOCK_LEVEL 0x01
|
|||
|
#define BIT_LOCK_CNT_512 (0x03 << 5)
|
|||
|
|
|||
|
static u8 ports[] = { MIPHY_PORT_0, MIPHY_PORT_1 };
|
|||
|
|
|||
|
struct miphy365x_phy {
|
|||
|
struct phy *phy;
|
|||
|
void __iomem *base;
|
|||
|
void __iomem *sata;
|
|||
|
void __iomem *pcie;
|
|||
|
u8 type;
|
|||
|
u8 port;
|
|||
|
};
|
|||
|
|
|||
|
struct miphy365x_dev {
|
|||
|
struct device *dev;
|
|||
|
struct regmap *regmap;
|
|||
|
struct mutex miphy_mutex;
|
|||
|
struct miphy365x phys[ARRAY_SIZE(ports)];
|
|||
|
bool pcie_tx_pol_inv;
|
|||
|
bool sata_tx_pol_inv;
|
|||
|
u32 sata_gen;
|
|||
|
};
|
|||
|
|
|||
|
/*
|
|||
|
* These values are represented in Device tree. They are considered to be ABI
|
|||
|
* and although they can be extended any existing values must not change.
|
|||
|
*/
|
|||
|
enum miphy_sata_gen {
|
|||
|
SATA_GEN1 = 1,
|
|||
|
SATA_GEN2,
|
|||
|
SATA_GEN3
|
|||
|
};
|
|||
|
|
|||
|
static u8 rx_tx_spd[] = {
|
|||
|
TX_SPDSEL_GEN1_VAL | RX_SPDSEL_GEN1_VAL,
|
|||
|
TX_SPDSEL_GEN2_VAL | RX_SPDSEL_GEN2_VAL,
|
|||
|
TX_SPDSEL_GEN3_VAL | RX_SPDSEL_GEN3_VAL
|
|||
|
};
|
|||
|
|
|||
|
/*
|
|||
|
* This function selects the system configuration,
|
|||
|
* either two SATA, one SATA and one PCIe, or two PCIe lanes.
|
|||
|
*/
|
|||
|
static int miphy365x_set_path(struct miphy365x_phy *miphy_phy,
|
|||
|
struct miphy365x_dev *miphy_dev)
|
|||
|
{
|
|||
|
u8 config = miphy_phy->type | miphy_phy->port;
|
|||
|
u32 mask = SYSCFG_PCIE_SATA_MASK;
|
|||
|
u32 reg;
|
|||
|
bool sata;
|
|||
|
|
|||
|
switch (config) {
|
|||
|
case MIPHY_SATA_PORT0:
|
|||
|
reg = SYSCFG_2521;
|
|||
|
sata = true;
|
|||
|
break;
|
|||
|
case MIPHY_PCIE_PORT1:
|
|||
|
reg = SYSCFG_2522;
|
|||
|
sata = false;
|
|||
|
break;
|
|||
|
default:
|
|||
|
dev_err(miphy_dev->dev, "Configuration not supported\n");
|
|||
|
return -EINVAL;
|
|||
|
}
|
|||
|
|
|||
|
return regmap_update_bits(miphy_dev->regmap, reg, mask,
|
|||
|
sata << SYSCFG_PCIE_SATA_POS);
|
|||
|
}
|
|||
|
|
|||
|
static int miphy365x_init_pcie_port(struct miphy365x_phy *miphy_phy,
|
|||
|
struct miphy365x_dev *miphy_dev)
|
|||
|
{
|
|||
|
u8 val;
|
|||
|
|
|||
|
if (miphy_phy->pcie_tx_pol_inv) {
|
|||
|
/* Invert Tx polarity and clear pci_txdetect_pol bit */
|
|||
|
val = TERM_EN | PCI_EN | DES_BIT_LOCK_EN | TX_POL;
|
|||
|
writeb_relaxed(val, miphy_phy->base + CTRL_REG);
|
|||
|
writeb_relaxed(0x00, miphy_phy->base + PCIE_REG);
|
|||
|
}
|
|||
|
|
|||
|
return 0;
|
|||
|
}
|
|||
|
|
|||
|
static inline int miphy365x_hfc_not_rdy(struct miphy365x_phy *miphy_phy,
|
|||
|
struct miphy365x_dev *miphy_dev)
|
|||
|
{
|
|||
|
unsigned long timeout = jiffies + msecs_to_jiffies(HFC_TIMEOUT);
|
|||
|
u8 mask = IDLL_RDY | PLL_RDY;
|
|||
|
u8 regval;
|
|||
|
|
|||
|
do {
|
|||
|
regval = readb_relaxed(miphy_phy->base + STATUS_REG);
|
|||
|
if (!(regval & mask))
|
|||
|
return 0;
|
|||
|
|
|||
|
usleep_range(2000, 2500);
|
|||
|
} while (time_before(jiffies, timeout));
|
|||
|
|
|||
|
dev_err(miphy_dev->dev, "HFC ready timeout!\n");
|
|||
|
return -EBUSY;
|
|||
|
}
|
|||
|
|
|||
|
static inline int miphy365x_rdy(struct miphy365x_phy *miphy_phy,
|
|||
|
struct miphy365x_dev *miphy_dev)
|
|||
|
{
|
|||
|
unsigned long timeout = jiffies + msecs_to_jiffies(HFC_TIMEOUT);
|
|||
|
u8 mask = IDLL_RDY | PLL_RDY;
|
|||
|
u8 regval;
|
|||
|
|
|||
|
do {
|
|||
|
regval = readb_relaxed(miphy_phy->base + STATUS_REG);
|
|||
|
if ((regval & mask) == mask)
|
|||
|
return 0;
|
|||
|
|
|||
|
usleep_range(2000, 2500);
|
|||
|
} while (time_before(jiffies, timeout));
|
|||
|
|
|||
|
dev_err(miphy_dev->dev, "PHY not ready timeout!\n");
|
|||
|
return -EBUSY;
|
|||
|
}
|
|||
|
|
|||
|
static inline void miphy365x_set_comp(struct miphy365x_phy *miphy_phy,
|
|||
|
struct miphy365x_dev *miphy_dev)
|
|||
|
{
|
|||
|
u8 val, mask;
|
|||
|
|
|||
|
if (miphy_dev->sata_gen == SATA_GEN1)
|
|||
|
writeb_relaxed(COMP_2MHZ_RAT_GEN1,
|
|||
|
miphy_phy->base + COMP_CTRL2_REG);
|
|||
|
else
|
|||
|
writeb_relaxed(COMP_2MHZ_RAT,
|
|||
|
miphy_phy->base + COMP_CTRL2_REG);
|
|||
|
|
|||
|
if (miphy_dev->sata_gen != SATA_GEN3) {
|
|||
|
writeb_relaxed(COMSR_COMP_REF,
|
|||
|
miphy_phy->base + COMP_CTRL3_REG);
|
|||
|
/*
|
|||
|
* Force VCO current to value defined by address 0x5A
|
|||
|
* and disable PCIe100Mref bit
|
|||
|
* Enable auto load compensation for pll_i_bias
|
|||
|
*/
|
|||
|
writeb_relaxed(BYPASS_PLL_CAL, miphy_phy->base + PLL_CTRL2_REG);
|
|||
|
writeb_relaxed(COMZC_IDLL, miphy_phy->base + COMP_IDLL_REG);
|
|||
|
}
|
|||
|
|
|||
|
/*
|
|||
|
* Force restart compensation and enable auto load
|
|||
|
* for Comzc_Tx, Comzc_Rx and Comsr on macro
|
|||
|
*/
|
|||
|
val = START_COMSR | START_COMZC | COMP_AUTO_LOAD;
|
|||
|
writeb_relaxed(val, miphy_phy->base + COMP_CTRL1_REG);
|
|||
|
|
|||
|
mask = COMSR_DONE | COMZC_DONE;
|
|||
|
while ((readb_relaxed(miphy_phy->base + COMP_CTRL1_REG) & mask) != mask)
|
|||
|
cpu_relax();
|
|||
|
}
|
|||
|
|
|||
|
static inline void miphy365x_set_ssc(struct miphy365x_phy *miphy_phy,
|
|||
|
struct miphy365x_dev *miphy_dev)
|
|||
|
{
|
|||
|
u8 val;
|
|||
|
|
|||
|
/*
|
|||
|
* SSC Settings. SSC will be enabled through Link
|
|||
|
* SSC Ampl. = 0.4%
|
|||
|
* SSC Freq = 31KHz
|
|||
|
*/
|
|||
|
writeb_relaxed(PLL_SSC_STEP_MSB_VAL,
|
|||
|
miphy_phy->base + PLL_SSC_STEP_MSB_REG);
|
|||
|
writeb_relaxed(PLL_SSC_STEP_LSB_VAL,
|
|||
|
miphy_phy->base + PLL_SSC_STEP_LSB_REG);
|
|||
|
writeb_relaxed(PLL_SSC_PER_MSB_VAL,
|
|||
|
miphy_phy->base + PLL_SSC_PER_MSB_REG);
|
|||
|
writeb_relaxed(PLL_SSC_PER_LSB_VAL,
|
|||
|
miphy_phy->base + PLL_SSC_PER_LSB_REG);
|
|||
|
|
|||
|
/* SSC Settings complete */
|
|||
|
if (miphy_dev->sata_gen == SATA_GEN1) {
|
|||
|
val = PLL_START_CAL | BUF_EN | SYNCHRO_TX | CONFIG_PLL;
|
|||
|
writeb_relaxed(val, miphy_phy->base + PLL_CTRL1_REG);
|
|||
|
} else {
|
|||
|
val = SSC_EN | PLL_START_CAL | BUF_EN | SYNCHRO_TX | CONFIG_PLL;
|
|||
|
writeb_relaxed(val, miphy_phy->base + PLL_CTRL1_REG);
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
static int miphy365x_init_sata_port(struct miphy365x_phy *miphy_phy,
|
|||
|
struct miphy365x_dev *miphy_dev)
|
|||
|
{
|
|||
|
int ret;
|
|||
|
u8 val;
|
|||
|
|
|||
|
/*
|
|||
|
* Force PHY macro reset, PLL calibration reset, PLL reset
|
|||
|
* and assert Deserializer Reset
|
|||
|
*/
|
|||
|
val = RST_PLL | RST_PLL_CAL | RST_RX | RST_MACRO;
|
|||
|
writeb_relaxed(val, miphy_phy->base + RESET_REG);
|
|||
|
|
|||
|
if (miphy_dev->sata_tx_pol_inv)
|
|||
|
writeb_relaxed(TX_POL, miphy_phy->base + CTRL_REG);
|
|||
|
|
|||
|
/*
|
|||
|
* Force macro1 to use rx_lspd, tx_lspd
|
|||
|
* Force Rx_Clock on first I-DLL phase
|
|||
|
* Force Des in HP mode on macro, rx_lspd, tx_lspd for Gen2/3
|
|||
|
*/
|
|||
|
writeb_relaxed(SPDSEL_SEL, miphy_phy->base + BOUNDARY1_REG);
|
|||
|
writeb_relaxed(START_CLK_HF, miphy_phy->base + IDLL_TEST_REG);
|
|||
|
val = rx_tx_spd[miphy_dev->sata_gen];
|
|||
|
writeb_relaxed(val, miphy_phy->base + BOUNDARY3_REG);
|
|||
|
|
|||
|
/* Wait for HFC_READY = 0 */
|
|||
|
ret = miphy365x_hfc_not_rdy(miphy_phy, miphy_dev);
|
|||
|
if (ret)
|
|||
|
return ret;
|
|||
|
|
|||
|
/* Compensation Recalibration */
|
|||
|
miphy365x_set_comp(miphy_phy, miphy_dev);
|
|||
|
|
|||
|
switch (miphy_dev->sata_gen) {
|
|||
|
case SATA_GEN3:
|
|||
|
/*
|
|||
|
* TX Swing target 550-600mv peak to peak diff
|
|||
|
* Tx Slew target 90-110ps rising/falling time
|
|||
|
* Rx Eq ON3, Sigdet threshold SDTH1
|
|||
|
*/
|
|||
|
val = PD_VDDTFILTER | CONF_GEN_SEL_GEN3;
|
|||
|
writeb_relaxed(val, miphy_phy->base + BUF_SEL_REG);
|
|||
|
val = SWING_VAL | PREEMPH_VAL;
|
|||
|
writeb_relaxed(val, miphy_phy->base + TXBUF1_REG);
|
|||
|
writeb_relaxed(TXSLEW_VAL, miphy_phy->base + TXBUF2_REG);
|
|||
|
writeb_relaxed(0x00, miphy_phy->base + RXBUF_OFFSET_CTRL_REG);
|
|||
|
val = SDTHRES_VAL | EQ_ON3;
|
|||
|
writeb_relaxed(val, miphy_phy->base + RXBUF_REG);
|
|||
|
break;
|
|||
|
case SATA_GEN2:
|
|||
|
/*
|
|||
|
* conf gen sel=0x1 to program Gen2 banked registers
|
|||
|
* VDDT filter ON
|
|||
|
* Tx Swing target 550-600mV peak-to-peak diff
|
|||
|
* Tx Slew target 90-110 ps rising/falling time
|
|||
|
* RX Equalization ON1, Sigdet threshold SDTH1
|
|||
|
*/
|
|||
|
writeb_relaxed(CONF_GEN_SEL_GEN2,
|
|||
|
miphy_phy->base + BUF_SEL_REG);
|
|||
|
writeb_relaxed(SWING_VAL, miphy_phy->base + TXBUF1_REG);
|
|||
|
writeb_relaxed(TXSLEW_VAL, miphy_phy->base + TXBUF2_REG);
|
|||
|
val = SDTHRES_VAL | EQ_ON1;
|
|||
|
writeb_relaxed(val, miphy_phy->base + RXBUF_REG);
|
|||
|
break;
|
|||
|
case SATA_GEN1:
|
|||
|
/*
|
|||
|
* conf gen sel = 00b to program Gen1 banked registers
|
|||
|
* VDDT filter ON
|
|||
|
* Tx Swing target 500-550mV peak-to-peak diff
|
|||
|
* Tx Slew target120-140 ps rising/falling time
|
|||
|
*/
|
|||
|
writeb_relaxed(PD_VDDTFILTER, miphy_phy->base + BUF_SEL_REG);
|
|||
|
writeb_relaxed(SWING_VAL_GEN1, miphy_phy->base + TXBUF1_REG);
|
|||
|
writeb_relaxed(TXSLEW_VAL_GEN1, miphy_phy->base + TXBUF2_REG);
|
|||
|
break;
|
|||
|
default:
|
|||
|
break;
|
|||
|
}
|
|||
|
|
|||
|
/* Force Macro1 in partial mode & release pll cal reset */
|
|||
|
writeb_relaxed(RST_RX, miphy_phy->base + RESET_REG);
|
|||
|
usleep_range(100, 150);
|
|||
|
|
|||
|
miphy365x_set_ssc(miphy_phy, miphy_dev);
|
|||
|
|
|||
|
/* Wait for phy_ready */
|
|||
|
ret = miphy365x_rdy(miphy_phy, miphy_dev);
|
|||
|
if (ret)
|
|||
|
return ret;
|
|||
|
|
|||
|
/*
|
|||
|
* Enable macro1 to use rx_lspd & tx_lspd
|
|||
|
* Release Rx_Clock on first I-DLL phase on macro1
|
|||
|
* Assert deserializer reset
|
|||
|
* des_bit_lock_en is set
|
|||
|
* bit lock detection strength
|
|||
|
* Deassert deserializer reset
|
|||
|
*/
|
|||
|
writeb_relaxed(0x00, miphy_phy->base + BOUNDARY1_REG);
|
|||
|
writeb_relaxed(0x00, miphy_phy->base + IDLL_TEST_REG);
|
|||
|
writeb_relaxed(RST_RX, miphy_phy->base + RESET_REG);
|
|||
|
val = miphy_dev->sata_tx_pol_inv ?
|
|||
|
(TX_POL | DES_BIT_LOCK_EN) : DES_BIT_LOCK_EN;
|
|||
|
writeb_relaxed(val, miphy_phy->base + CTRL_REG);
|
|||
|
|
|||
|
val = BIT_LOCK_CNT_512 | BIT_LOCK_LEVEL;
|
|||
|
writeb_relaxed(val, miphy_phy->base + DES_BITLOCK_REG);
|
|||
|
writeb_relaxed(0x00, miphy_phy->base + RESET_REG);
|
|||
|
|
|||
|
return 0;
|
|||
|
}
|
|||
|
|
|||
|
static int miphy365x_init(struct phy *phy)
|
|||
|
{
|
|||
|
struct miphy365x_phy *miphy_phy = phy_get_drvdata(phy);
|
|||
|
struct miphy365x_dev *miphy_dev = dev_get_drvdata(phy->dev.parent);
|
|||
|
int ret = 0;
|
|||
|
|
|||
|
mutex_lock(&miphy_dev->miphy_mutex);
|
|||
|
|
|||
|
ret = miphy365x_set_path(miphy_phy, miphy_dev);
|
|||
|
if (ret) {
|
|||
|
mutex_unlock(&miphy_dev->miphy_mutex);
|
|||
|
return ret;
|
|||
|
}
|
|||
|
|
|||
|
/* Initialise Miphy for PCIe or SATA */
|
|||
|
if (miphy_phy->type == MIPHY_TYPE_PCIE)
|
|||
|
ret = miphy365x_init_pcie_port(miphy_phy, miphy_dev);
|
|||
|
else
|
|||
|
ret = miphy365x_init_sata_port(miphy_phy, miphy_dev);
|
|||
|
|
|||
|
mutex_unlock(&miphy_dev->miphy_mutex);
|
|||
|
|
|||
|
return ret;
|
|||
|
}
|
|||
|
|
|||
|
static struct phy *miphy365x_xlate(struct device *dev,
|
|||
|
struct of_phandle_args *args)
|
|||
|
{
|
|||
|
struct miphy365x_dev *state = dev_get_drvdata(dev);
|
|||
|
u8 port, type;
|
|||
|
|
|||
|
if (args->count != 2) {
|
|||
|
dev_err(dev, "Invalid number of cells in 'phy' property\n");
|
|||
|
return ERR_PTR(-EINVAL);
|
|||
|
}
|
|||
|
|
|||
|
if (args->args[0] & 0xFFFFFF00 || args->args[1] & 0xFFFFFF00) {
|
|||
|
dev_err(dev, "Unsupported flags set in 'phy' property\n");
|
|||
|
return ERR_PTR(-EINVAL);
|
|||
|
}
|
|||
|
|
|||
|
port = args->args[0];
|
|||
|
type = args->args[1];
|
|||
|
|
|||
|
if (WARN_ON(port >= ARRAY_SIZE(ports)))
|
|||
|
return ERR_PTR(-EINVAL);
|
|||
|
|
|||
|
if (type == MIPHY_TYPE_SATA)
|
|||
|
state->phys[port].base = state->phys[port].sata;
|
|||
|
else if (type == MIPHY_TYPE_PCIE)
|
|||
|
state->phys[port].base = state->phys[port].pcie;
|
|||
|
else {
|
|||
|
WARN(1, "Invalid type specified in DT");
|
|||
|
return ERR_PTR(-EINVAL);
|
|||
|
}
|
|||
|
|
|||
|
state->phys[port].type = type;
|
|||
|
|
|||
|
return state->phys[port].phy;
|
|||
|
}
|
|||
|
|
|||
|
static struct phy_ops miphy365x_ops = {
|
|||
|
.init = miphy365x_init,
|
|||
|
.owner = THIS_MODULE,
|
|||
|
};
|
|||
|
|
|||
|
static int miphy365x_get_base_addr(struct platform_device *pdev,
|
|||
|
struct miphy365x_phy *phy, u8 port)
|
|||
|
{
|
|||
|
struct resource *res;
|
|||
|
char type[6];
|
|||
|
|
|||
|
sprintf(type, "sata%d", port);
|
|||
|
|
|||
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, type);
|
|||
|
phy->sata = devm_ioremap_resource(&pdev->dev, res));
|
|||
|
if (!phy->sata)
|
|||
|
return -ENOMEM;
|
|||
|
|
|||
|
sprintf(type, "pcie%d", port);
|
|||
|
|
|||
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, type);
|
|||
|
phy->pcie = devm_ioremap_resource(&pdev->dev, res));
|
|||
|
if (!phy->pcie)
|
|||
|
return -ENOMEM;
|
|||
|
|
|||
|
return 0;
|
|||
|
}
|
|||
|
|
|||
|
static int miphy365x_of_probe(struct device_node *np,
|
|||
|
struct miphy365x_dev *phy_dev)
|
|||
|
{
|
|||
|
phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
|
|||
|
if (IS_ERR(phy_dev->regmap)) {
|
|||
|
dev_err(phy_dev->dev, "No syscfg phandle specified\n");
|
|||
|
return PTR_ERR(phy_dev->regmap);
|
|||
|
}
|
|||
|
|
|||
|
of_property_read_u32(np, "st,sata-gen", &phy_dev->sata_gen);
|
|||
|
if (!phy_dev->sata_gen)
|
|||
|
phy_dev->sata_gen = SATA_GEN1;
|
|||
|
|
|||
|
phy_dev->pcie_tx_pol_inv =
|
|||
|
of_property_read_bool(np, "st,pcie-tx-pol-inv");
|
|||
|
|
|||
|
phy_dev->sata_tx_pol_inv =
|
|||
|
of_property_read_bool(np, "st,sata-tx-pol-inv");
|
|||
|
|
|||
|
return 0;
|
|||
|
}
|
|||
|
|
|||
|
static int miphy365x_probe(struct platform_device *pdev)
|
|||
|
{
|
|||
|
struct device_node *np = pdev->dev.of_node;
|
|||
|
struct miphy365x_dev *phy_dev;
|
|||
|
struct device *dev = &pdev->dev;
|
|||
|
struct phy_provider *provider;
|
|||
|
u8 port;
|
|||
|
int ret;
|
|||
|
|
|||
|
phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL);
|
|||
|
if (!phy_dev)
|
|||
|
return -ENOMEM;
|
|||
|
|
|||
|
ret = miphy365x_of_probe(np, phy_dev);
|
|||
|
if (ret)
|
|||
|
return ret;
|
|||
|
|
|||
|
phy_dev->dev = dev;
|
|||
|
|
|||
|
dev_set_drvdata(dev, phy_dev);
|
|||
|
|
|||
|
mutex_init(&phy_dev->miphy_mutex);
|
|||
|
|
|||
|
for (port = 0; port < ARRAY_SIZE(ports); port++) {
|
|||
|
struct phy *phy;
|
|||
|
|
|||
|
phy = devm_phy_create(dev, &miphy365x_ops, NULL);
|
|||
|
if (IS_ERR(phy)) {
|
|||
|
dev_err(dev, "failed to create PHY on port %d\n", port);
|
|||
|
return PTR_ERR(phy);
|
|||
|
}
|
|||
|
|
|||
|
phy_dev->phys[port].phy = phy;
|
|||
|
phy_dev->phys[port].port = port;
|
|||
|
|
|||
|
ret = miphy365x_get_base_addr(pdev,
|
|||
|
&phy_dev->phys[port], port);
|
|||
|
if (ret)
|
|||
|
return ret;
|
|||
|
|
|||
|
phy_set_drvdata(phy, &phy_dev->phys[port]);
|
|||
|
}
|
|||
|
|
|||
|
provider = devm_of_phy_provider_register(dev, miphy365x_xlate);
|
|||
|
if (IS_ERR(provider))
|
|||
|
return PTR_ERR(provider);
|
|||
|
|
|||
|
return 0;
|
|||
|
}
|
|||
|
|
|||
|
static const struct of_device_id miphy365x_of_match[] = {
|
|||
|
{ .compatible = "st,miphy365x-phy", },
|
|||
|
{ },
|
|||
|
};
|
|||
|
MODULE_DEVICE_TABLE(of, miphy365x_of_match);
|
|||
|
|
|||
|
static struct platform_driver miphy365x_driver = {
|
|||
|
.probe = miphy365x_probe,
|
|||
|
.driver = {
|
|||
|
.name = "miphy365x-phy",
|
|||
|
.owner = THIS_MODULE,
|
|||
|
.of_match_table = miphy365x_of_match,
|
|||
|
}
|
|||
|
};
|
|||
|
module_platform_driver(miphy365x_driver);
|
|||
|
|
|||
|
MODULE_AUTHOR("Alexandre Torgue <alexandre.torgue@st.com>");
|
|||
|
MODULE_DESCRIPTION("STMicroelectronics miphy365x driver");
|
|||
|
MODULE_LICENSE("GPL v2");
|