linux_old1/drivers/scsi/aic94xx/aic94xx_reg.c

332 lines
11 KiB
C
Raw Normal View History

[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
/*
* Aic94xx SAS/SATA driver register access.
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* This file is licensed under GPLv2.
*
* This file is part of the aic94xx driver.
*
* The aic94xx driver is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of the
* License.
*
* The aic94xx driver is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the aic94xx driver; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <linux/pci.h>
#include "aic94xx_reg.h"
#include "aic94xx.h"
/* Writing to device address space.
* Offset comes before value to remind that the operation of
* this function is *offs = val.
*/
static void asd_write_byte(struct asd_ha_struct *asd_ha,
unsigned long offs, u8 val)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
if (unlikely(asd_ha->iospace))
outb(val,
(unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
else
writeb(val, asd_ha->io_handle[0].addr + offs);
wmb();
}
static void asd_write_word(struct asd_ha_struct *asd_ha,
unsigned long offs, u16 val)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
if (unlikely(asd_ha->iospace))
outw(val,
(unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
else
writew(val, asd_ha->io_handle[0].addr + offs);
wmb();
}
static void asd_write_dword(struct asd_ha_struct *asd_ha,
unsigned long offs, u32 val)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
if (unlikely(asd_ha->iospace))
outl(val,
(unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
else
writel(val, asd_ha->io_handle[0].addr + offs);
wmb();
}
/* Reading from device address space.
*/
static u8 asd_read_byte(struct asd_ha_struct *asd_ha, unsigned long offs)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
u8 val;
if (unlikely(asd_ha->iospace))
val = inb((unsigned long) asd_ha->io_handle[0].addr
+ (offs & 0xFF));
else
val = readb(asd_ha->io_handle[0].addr + offs);
rmb();
return val;
}
static u16 asd_read_word(struct asd_ha_struct *asd_ha,
unsigned long offs)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
u16 val;
if (unlikely(asd_ha->iospace))
val = inw((unsigned long)asd_ha->io_handle[0].addr
+ (offs & 0xFF));
else
val = readw(asd_ha->io_handle[0].addr + offs);
rmb();
return val;
}
static u32 asd_read_dword(struct asd_ha_struct *asd_ha,
unsigned long offs)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
u32 val;
if (unlikely(asd_ha->iospace))
val = inl((unsigned long) asd_ha->io_handle[0].addr
+ (offs & 0xFF));
else
val = readl(asd_ha->io_handle[0].addr + offs);
rmb();
return val;
}
static inline u32 asd_mem_offs_swa(void)
{
return 0;
}
static inline u32 asd_mem_offs_swc(void)
{
return asd_mem_offs_swa() + MBAR0_SWA_SIZE;
}
static inline u32 asd_mem_offs_swb(void)
{
return asd_mem_offs_swc() + MBAR0_SWC_SIZE + 0x20;
}
/* We know that the register wanted is in the range
* of the sliding window.
*/
#define ASD_READ_SW(ww, type, ord) \
static type asd_read_##ww##_##ord(struct asd_ha_struct *asd_ha, \
u32 reg) \
{ \
struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0]; \
u32 map_offs = (reg - io_handle->ww##_base) + asd_mem_offs_##ww();\
return asd_read_##ord(asd_ha, (unsigned long)map_offs); \
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
}
#define ASD_WRITE_SW(ww, type, ord) \
static void asd_write_##ww##_##ord(struct asd_ha_struct *asd_ha, \
u32 reg, type val) \
{ \
struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0]; \
u32 map_offs = (reg - io_handle->ww##_base) + asd_mem_offs_##ww();\
asd_write_##ord(asd_ha, (unsigned long)map_offs, val); \
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
}
ASD_READ_SW(swa, u8, byte);
ASD_READ_SW(swa, u16, word);
ASD_READ_SW(swa, u32, dword);
ASD_READ_SW(swb, u8, byte);
ASD_READ_SW(swb, u16, word);
ASD_READ_SW(swb, u32, dword);
ASD_READ_SW(swc, u8, byte);
ASD_READ_SW(swc, u16, word);
ASD_READ_SW(swc, u32, dword);
ASD_WRITE_SW(swa, u8, byte);
ASD_WRITE_SW(swa, u16, word);
ASD_WRITE_SW(swa, u32, dword);
ASD_WRITE_SW(swb, u8, byte);
ASD_WRITE_SW(swb, u16, word);
ASD_WRITE_SW(swb, u32, dword);
ASD_WRITE_SW(swc, u8, byte);
ASD_WRITE_SW(swc, u16, word);
ASD_WRITE_SW(swc, u32, dword);
/*
* A word about sliding windows:
* MBAR0 is divided into sliding windows A, C and B, in that order.
* SWA starts at offset 0 of MBAR0, up to 0x57, with size 0x58 bytes.
* SWC starts at offset 0x58 of MBAR0, up to 0x60, with size 0x8 bytes.
* From 0x60 to 0x7F, we have a copy of PCI config space 0x60-0x7F.
* SWB starts at offset 0x80 of MBAR0 and extends to the end of MBAR0.
* See asd_init_sw() in aic94xx_hwi.c
*
* We map the most common registers we'd access of the internal 4GB
* host adapter memory space. If a register/internal memory location
* is wanted which is not mapped, we slide SWB, by paging it,
* see asd_move_swb() in aic94xx_reg.c.
*/
/**
* asd_move_swb -- move sliding window B
* @asd_ha: pointer to host adapter structure
* @reg: register desired to be within range of the new window
*/
static void asd_move_swb(struct asd_ha_struct *asd_ha, u32 reg)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
u32 base = reg & ~(MBAR0_SWB_SIZE-1);
pci_write_config_dword(asd_ha->pcidev, PCI_CONF_MBAR0_SWB, base);
asd_ha->io_handle[0].swb_base = base;
}
static void __asd_write_reg_byte(struct asd_ha_struct *asd_ha, u32 reg, u8 val)
{
struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0];
BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);
if (io_handle->swa_base <= reg
&& reg < io_handle->swa_base + MBAR0_SWA_SIZE)
asd_write_swa_byte (asd_ha, reg,val);
else if (io_handle->swb_base <= reg
&& reg < io_handle->swb_base + MBAR0_SWB_SIZE)
asd_write_swb_byte (asd_ha, reg, val);
else if (io_handle->swc_base <= reg
&& reg < io_handle->swc_base + MBAR0_SWC_SIZE)
asd_write_swc_byte (asd_ha, reg, val);
else {
/* Ok, we have to move SWB */
asd_move_swb(asd_ha, reg);
asd_write_swb_byte (asd_ha, reg, val);
}
}
#define ASD_WRITE_REG(type, ord) \
void asd_write_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg, type val)\
{ \
struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \
unsigned long flags; \
BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); \
spin_lock_irqsave(&asd_ha->iolock, flags); \
if (io_handle->swa_base <= reg \
&& reg < io_handle->swa_base + MBAR0_SWA_SIZE) \
asd_write_swa_##ord (asd_ha, reg,val); \
else if (io_handle->swb_base <= reg \
&& reg < io_handle->swb_base + MBAR0_SWB_SIZE) \
asd_write_swb_##ord (asd_ha, reg, val); \
else if (io_handle->swc_base <= reg \
&& reg < io_handle->swc_base + MBAR0_SWC_SIZE) \
asd_write_swc_##ord (asd_ha, reg, val); \
else { \
/* Ok, we have to move SWB */ \
asd_move_swb(asd_ha, reg); \
asd_write_swb_##ord (asd_ha, reg, val); \
} \
spin_unlock_irqrestore(&asd_ha->iolock, flags); \
}
ASD_WRITE_REG(u8, byte);
ASD_WRITE_REG(u16,word);
ASD_WRITE_REG(u32,dword);
static u8 __asd_read_reg_byte(struct asd_ha_struct *asd_ha, u32 reg)
{
struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0];
u8 val;
BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);
if (io_handle->swa_base <= reg
&& reg < io_handle->swa_base + MBAR0_SWA_SIZE)
val = asd_read_swa_byte (asd_ha, reg);
else if (io_handle->swb_base <= reg
&& reg < io_handle->swb_base + MBAR0_SWB_SIZE)
val = asd_read_swb_byte (asd_ha, reg);
else if (io_handle->swc_base <= reg
&& reg < io_handle->swc_base + MBAR0_SWC_SIZE)
val = asd_read_swc_byte (asd_ha, reg);
else {
/* Ok, we have to move SWB */
asd_move_swb(asd_ha, reg);
val = asd_read_swb_byte (asd_ha, reg);
}
return val;
}
#define ASD_READ_REG(type, ord) \
type asd_read_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg) \
{ \
struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \
type val; \
unsigned long flags; \
BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); \
spin_lock_irqsave(&asd_ha->iolock, flags); \
if (io_handle->swa_base <= reg \
&& reg < io_handle->swa_base + MBAR0_SWA_SIZE) \
val = asd_read_swa_##ord (asd_ha, reg); \
else if (io_handle->swb_base <= reg \
&& reg < io_handle->swb_base + MBAR0_SWB_SIZE) \
val = asd_read_swb_##ord (asd_ha, reg); \
else if (io_handle->swc_base <= reg \
&& reg < io_handle->swc_base + MBAR0_SWC_SIZE) \
val = asd_read_swc_##ord (asd_ha, reg); \
else { \
/* Ok, we have to move SWB */ \
asd_move_swb(asd_ha, reg); \
val = asd_read_swb_##ord (asd_ha, reg); \
} \
spin_unlock_irqrestore(&asd_ha->iolock, flags); \
return val; \
}
ASD_READ_REG(u8, byte);
ASD_READ_REG(u16,word);
ASD_READ_REG(u32,dword);
/**
* asd_read_reg_string -- read a string of bytes from io space memory
* @asd_ha: pointer to host adapter structure
* @dst: pointer to a destination buffer where data will be written to
* @offs: start offset (register) to read from
* @count: number of bytes to read
*/
void asd_read_reg_string(struct asd_ha_struct *asd_ha, void *dst,
u32 offs, int count)
{
u8 *p = dst;
unsigned long flags;
spin_lock_irqsave(&asd_ha->iolock, flags);
for ( ; count > 0; count--, offs++, p++)
*p = __asd_read_reg_byte(asd_ha, offs);
spin_unlock_irqrestore(&asd_ha->iolock, flags);
}
/**
* asd_write_reg_string -- write a string of bytes to io space memory
* @asd_ha: pointer to host adapter structure
* @src: pointer to source buffer where data will be read from
* @offs: start offset (register) to write to
* @count: number of bytes to write
*/
void asd_write_reg_string(struct asd_ha_struct *asd_ha, void *src,
u32 offs, int count)
{
u8 *p = src;
unsigned long flags;
spin_lock_irqsave(&asd_ha->iolock, flags);
for ( ; count > 0; count--, offs++, p++)
__asd_write_reg_byte(asd_ha, offs, *p);
spin_unlock_irqrestore(&asd_ha->iolock, flags);
}