License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
# SPDX-License-Identifier: GPL-2.0
|
2012-09-13 22:17:21 +08:00
|
|
|
menuconfig ASYMMETRIC_KEY_TYPE
|
2016-04-06 23:14:26 +08:00
|
|
|
bool "Asymmetric (public-key cryptographic) key type"
|
2012-09-13 22:17:21 +08:00
|
|
|
depends on KEYS
|
|
|
|
|
help
|
|
|
|
|
This option provides support for a key type that holds the data for
|
|
|
|
|
the asymmetric keys used for public key cryptographic operations such
|
|
|
|
|
as encryption, decryption, signature generation and signature
|
|
|
|
|
verification.
|
|
|
|
|
|
|
|
|
|
if ASYMMETRIC_KEY_TYPE
|
|
|
|
|
|
2012-09-22 06:24:55 +08:00
|
|
|
config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
|
|
|
|
|
tristate "Asymmetric public-key crypto algorithm subtype"
|
|
|
|
|
select MPILIB
|
2013-05-06 20:58:15 +08:00
|
|
|
select CRYPTO_HASH_INFO
|
2016-05-18 22:55:56 +08:00
|
|
|
select CRYPTO_AKCIPHER
|
2012-09-22 06:24:55 +08:00
|
|
|
help
|
|
|
|
|
This option provides support for asymmetric public key type handling.
|
|
|
|
|
If signature generation and/or verification are to be used,
|
|
|
|
|
appropriate hash algorithms (such as SHA-1) must be available.
|
|
|
|
|
ENOPKG will be reported if the requisite algorithm is unavailable.
|
2012-09-13 22:17:21 +08:00
|
|
|
|
2012-09-25 00:11:48 +08:00
|
|
|
config X509_CERTIFICATE_PARSER
|
|
|
|
|
tristate "X.509 certificate parser"
|
|
|
|
|
depends on ASYMMETRIC_PUBLIC_KEY_SUBTYPE
|
|
|
|
|
select ASN1
|
|
|
|
|
select OID_REGISTRY
|
|
|
|
|
help
|
2014-07-09 00:21:01 +08:00
|
|
|
This option provides support for parsing X.509 format blobs for key
|
2012-09-25 00:11:48 +08:00
|
|
|
data and provides the ability to instantiate a crypto key from a
|
|
|
|
|
public key packet found inside the certificate.
|
|
|
|
|
|
2014-07-01 23:40:19 +08:00
|
|
|
config PKCS7_MESSAGE_PARSER
|
|
|
|
|
tristate "PKCS#7 message parser"
|
|
|
|
|
depends on X509_CERTIFICATE_PARSER
|
|
|
|
|
select ASN1
|
|
|
|
|
select OID_REGISTRY
|
|
|
|
|
help
|
|
|
|
|
This option provides support for parsing PKCS#7 format messages for
|
|
|
|
|
signature data and provides the ability to verify the signature.
|
|
|
|
|
|
PKCS#7: Provide a key type for testing PKCS#7
Provide a key type for testing the PKCS#7 parser. It is given a non-detached
PKCS#7 message as payload:
keyctl padd pkcs7_test a @s <stuff.pkcs7
The PKCS#7 wrapper is validated against the trusted certificates available and
then stripped off. If successful, the key can be read, which will give the
data content of the PKCS#7 message.
A suitable message can be created by running make on the attached Makefile.
This will produce a file called stuff.pkcs7 for test loading. The key3.x509
file should be put into the kernel source tree before it is built and
converted to DER form:
openssl x509 -in .../pkcs7/key3.x509 -outform DER -out key3.x509
###############################################################################
#
# Create a pkcs7 message and sign it twice
#
# openssl x509 -text -inform PEM -noout -in key2.x509
#
###############################################################################
stuff.pkcs7: stuff.txt key2.priv key2.x509 key4.priv key4.x509 certs
$(RM) $@
openssl smime -sign \
-signer key2.x509 \
-inkey key2.priv \
-signer key4.x509 \
-inkey key4.priv \
-in stuff.txt \
-certfile certs \
-out $@ -binary -outform DER -nodetach
openssl pkcs7 -inform DER -in stuff.pkcs7 -print_certs -noout
openssl asn1parse -inform DER -in stuff.pkcs7 -i >out
stuff.txt:
echo "The quick red fox jumped over the lazy brown dog" >stuff.txt
certs: key1.x509 key2.x509 key3.x509 key4.x509
cat key{1,3}.x509 >$@
###############################################################################
#
# Generate a signed key
#
# openssl x509 -text -inform PEM -noout -in key2.x509
#
###############################################################################
key2.x509: key2.x509_unsigned key1.priv key1.x509
openssl x509 \
-req -in key2.x509_unsigned \
-out key2.x509 \
-extfile key2.genkey -extensions myexts \
-CA key1.x509 \
-CAkey key1.priv \
-CAcreateserial
key2.priv key2.x509_unsigned: key2.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -outform PEM \
-config key2.genkey \
-keyout key2.priv \
-out key2.x509_unsigned
key2.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 2"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:FALSE"
@echo >>$@ "keyUsage=digitalSignature"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
###############################################################################
#
# Generate a couple of signing keys
#
# openssl x509 -text -inform PEM -noout -in key1.x509
#
###############################################################################
key1.x509: key1.x509_unsigned key4.priv key4.x509
openssl x509 \
-req -in key1.x509_unsigned \
-out key1.x509 \
-extfile key1.genkey -extensions myexts \
-CA key4.x509 \
-CAkey key4.priv \
-CAcreateserial
key1.priv key1.x509_unsigned: key1.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -outform PEM \
-config key1.genkey \
-keyout key1.priv \
-out key1.x509_unsigned
key1.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 1"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:TRUE"
@echo >>$@ "keyUsage=digitalSignature,keyCertSign"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
###############################################################################
#
# Generate a signed key
#
# openssl x509 -text -inform PEM -noout -in key4.x509
#
###############################################################################
key4.x509: key4.x509_unsigned key3.priv key3.x509
openssl x509 \
-req -in key4.x509_unsigned \
-out key4.x509 \
-extfile key4.genkey -extensions myexts \
-CA key3.x509 \
-CAkey key3.priv \
-CAcreateserial
key4.priv key4.x509_unsigned: key4.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -outform PEM \
-config key4.genkey \
-keyout key4.priv \
-out key4.x509_unsigned
key4.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 4"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:TRUE"
@echo >>$@ "keyUsage=digitalSignature,keyCertSign"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
###############################################################################
#
# Generate a couple of signing keys
#
# openssl x509 -text -inform PEM -noout -in key3.x509
#
###############################################################################
key3.priv key3.x509: key3.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -x509 -outform PEM \
-config key3.genkey \
-keyout key3.priv \
-out key3.x509
key3.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 3"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:TRUE"
@echo >>$@ "keyUsage=digitalSignature,keyCertSign"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
clean:
$(RM) *~
$(RM) key1.* key2.* key3.* key4.* stuff.* out certs
Signed-off-by: David Howells <dhowells@redhat.com>
2014-07-02 02:06:18 +08:00
|
|
|
config PKCS7_TEST_KEY
|
|
|
|
|
tristate "PKCS#7 testing key type"
|
2016-04-06 23:14:24 +08:00
|
|
|
depends on SYSTEM_DATA_VERIFICATION
|
PKCS#7: Provide a key type for testing PKCS#7
Provide a key type for testing the PKCS#7 parser. It is given a non-detached
PKCS#7 message as payload:
keyctl padd pkcs7_test a @s <stuff.pkcs7
The PKCS#7 wrapper is validated against the trusted certificates available and
then stripped off. If successful, the key can be read, which will give the
data content of the PKCS#7 message.
A suitable message can be created by running make on the attached Makefile.
This will produce a file called stuff.pkcs7 for test loading. The key3.x509
file should be put into the kernel source tree before it is built and
converted to DER form:
openssl x509 -in .../pkcs7/key3.x509 -outform DER -out key3.x509
###############################################################################
#
# Create a pkcs7 message and sign it twice
#
# openssl x509 -text -inform PEM -noout -in key2.x509
#
###############################################################################
stuff.pkcs7: stuff.txt key2.priv key2.x509 key4.priv key4.x509 certs
$(RM) $@
openssl smime -sign \
-signer key2.x509 \
-inkey key2.priv \
-signer key4.x509 \
-inkey key4.priv \
-in stuff.txt \
-certfile certs \
-out $@ -binary -outform DER -nodetach
openssl pkcs7 -inform DER -in stuff.pkcs7 -print_certs -noout
openssl asn1parse -inform DER -in stuff.pkcs7 -i >out
stuff.txt:
echo "The quick red fox jumped over the lazy brown dog" >stuff.txt
certs: key1.x509 key2.x509 key3.x509 key4.x509
cat key{1,3}.x509 >$@
###############################################################################
#
# Generate a signed key
#
# openssl x509 -text -inform PEM -noout -in key2.x509
#
###############################################################################
key2.x509: key2.x509_unsigned key1.priv key1.x509
openssl x509 \
-req -in key2.x509_unsigned \
-out key2.x509 \
-extfile key2.genkey -extensions myexts \
-CA key1.x509 \
-CAkey key1.priv \
-CAcreateserial
key2.priv key2.x509_unsigned: key2.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -outform PEM \
-config key2.genkey \
-keyout key2.priv \
-out key2.x509_unsigned
key2.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 2"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:FALSE"
@echo >>$@ "keyUsage=digitalSignature"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
###############################################################################
#
# Generate a couple of signing keys
#
# openssl x509 -text -inform PEM -noout -in key1.x509
#
###############################################################################
key1.x509: key1.x509_unsigned key4.priv key4.x509
openssl x509 \
-req -in key1.x509_unsigned \
-out key1.x509 \
-extfile key1.genkey -extensions myexts \
-CA key4.x509 \
-CAkey key4.priv \
-CAcreateserial
key1.priv key1.x509_unsigned: key1.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -outform PEM \
-config key1.genkey \
-keyout key1.priv \
-out key1.x509_unsigned
key1.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 1"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:TRUE"
@echo >>$@ "keyUsage=digitalSignature,keyCertSign"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
###############################################################################
#
# Generate a signed key
#
# openssl x509 -text -inform PEM -noout -in key4.x509
#
###############################################################################
key4.x509: key4.x509_unsigned key3.priv key3.x509
openssl x509 \
-req -in key4.x509_unsigned \
-out key4.x509 \
-extfile key4.genkey -extensions myexts \
-CA key3.x509 \
-CAkey key3.priv \
-CAcreateserial
key4.priv key4.x509_unsigned: key4.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -outform PEM \
-config key4.genkey \
-keyout key4.priv \
-out key4.x509_unsigned
key4.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 4"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:TRUE"
@echo >>$@ "keyUsage=digitalSignature,keyCertSign"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
###############################################################################
#
# Generate a couple of signing keys
#
# openssl x509 -text -inform PEM -noout -in key3.x509
#
###############################################################################
key3.priv key3.x509: key3.genkey
openssl req -new -nodes -utf8 -sha1 -days 36500 \
-batch -x509 -outform PEM \
-config key3.genkey \
-keyout key3.priv \
-out key3.x509
key3.genkey:
@echo Generating X.509 key generation config
@echo >$@ "[ req ]"
@echo >>$@ "default_bits = 4096"
@echo >>$@ "distinguished_name = req_distinguished_name"
@echo >>$@ "prompt = no"
@echo >>$@ "string_mask = utf8only"
@echo >>$@ "x509_extensions = myexts"
@echo >>$@
@echo >>$@ "[ req_distinguished_name ]"
@echo >>$@ "O = Magrathea"
@echo >>$@ "CN = PKCS7 key 3"
@echo >>$@ "emailAddress = slartibartfast@magrathea.h2g2"
@echo >>$@
@echo >>$@ "[ myexts ]"
@echo >>$@ "basicConstraints=critical,CA:TRUE"
@echo >>$@ "keyUsage=digitalSignature,keyCertSign"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
clean:
$(RM) *~
$(RM) key1.* key2.* key3.* key4.* stuff.* out certs
Signed-off-by: David Howells <dhowells@redhat.com>
2014-07-02 02:06:18 +08:00
|
|
|
help
|
|
|
|
|
This option provides a type of key that can be loaded up from a
|
|
|
|
|
PKCS#7 message - provided the message is signed by a trusted key. If
|
|
|
|
|
it is, the PKCS#7 wrapper is discarded and reading the key returns
|
|
|
|
|
just the payload. If it isn't, adding the key will fail with an
|
|
|
|
|
error.
|
|
|
|
|
|
|
|
|
|
This is intended for testing the PKCS#7 parser.
|
|
|
|
|
|
2014-07-01 23:02:51 +08:00
|
|
|
config SIGNED_PE_FILE_VERIFICATION
|
|
|
|
|
bool "Support for PE file signature verification"
|
|
|
|
|
depends on PKCS7_MESSAGE_PARSER=y
|
2016-04-06 23:14:24 +08:00
|
|
|
depends on SYSTEM_DATA_VERIFICATION
|
2014-07-01 23:02:51 +08:00
|
|
|
select ASN1
|
|
|
|
|
select OID_REGISTRY
|
|
|
|
|
help
|
|
|
|
|
This option provides support for verifying the signature(s) on a
|
|
|
|
|
signed PE binary.
|
|
|
|
|
|
2012-09-13 22:17:21 +08:00
|
|
|
endif # ASYMMETRIC_KEY_TYPE
|