linux_old1/include/net/ip6_route.h

281 lines
8.2 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _NET_IP6_ROUTE_H
#define _NET_IP6_ROUTE_H
struct route_info {
__u8 type;
__u8 length;
__u8 prefix_len;
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 reserved_h:3,
route_pref:2,
reserved_l:3;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
__u8 reserved_l:3,
route_pref:2,
reserved_h:3;
#endif
__be32 lifetime;
__u8 prefix[0]; /* 0,8 or 16 */
};
#include <net/addrconf.h>
#include <net/flow.h>
#include <net/ip6_fib.h>
#include <net/sock.h>
#include <net/lwtunnel.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/route.h>
#define RT6_LOOKUP_F_IFACE 0x00000001
#define RT6_LOOKUP_F_REACHABLE 0x00000002
#define RT6_LOOKUP_F_HAS_SADDR 0x00000004
#define RT6_LOOKUP_F_SRCPREF_TMP 0x00000008
#define RT6_LOOKUP_F_SRCPREF_PUBLIC 0x00000010
#define RT6_LOOKUP_F_SRCPREF_COA 0x00000020
#define RT6_LOOKUP_F_IGNORE_LINKSTATE 0x00000040
/* We do not (yet ?) support IPv6 jumbograms (RFC 2675)
* Unlike IPv4, hdr->seg_len doesn't include the IPv6 header
*/
#define IP6_MAX_MTU (0xFFFF + sizeof(struct ipv6hdr))
/*
* rt6_srcprefs2flags() and rt6_flags2srcprefs() translate
* between IPV6_ADDR_PREFERENCES socket option values
* IPV6_PREFER_SRC_TMP = 0x1
* IPV6_PREFER_SRC_PUBLIC = 0x2
* IPV6_PREFER_SRC_COA = 0x4
* and above RT6_LOOKUP_F_SRCPREF_xxx flags.
*/
static inline int rt6_srcprefs2flags(unsigned int srcprefs)
{
/* No need to bitmask because srcprefs have only 3 bits. */
return srcprefs << 3;
}
static inline unsigned int rt6_flags2srcprefs(int flags)
{
return (flags >> 3) & 7;
}
static inline bool rt6_need_strict(const struct in6_addr *daddr)
{
return ipv6_addr_type(daddr) &
(IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL | IPV6_ADDR_LOOPBACK);
}
static inline bool rt6_qualify_for_ecmp(const struct rt6_info *rt)
{
return (rt->rt6i_flags & (RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC)) ==
RTF_GATEWAY;
}
void ip6_route_input(struct sk_buff *skb);
struct dst_entry *ip6_route_input_lookup(struct net *net,
struct net_device *dev,
struct flowi6 *fl6,
const struct sk_buff *skb, int flags);
struct dst_entry *ip6_route_output_flags(struct net *net, const struct sock *sk,
struct flowi6 *fl6, int flags);
static inline struct dst_entry *ip6_route_output(struct net *net,
const struct sock *sk,
struct flowi6 *fl6)
{
return ip6_route_output_flags(net, sk, fl6, 0);
}
struct dst_entry *ip6_route_lookup(struct net *net, struct flowi6 *fl6,
const struct sk_buff *skb, int flags);
struct rt6_info *ip6_pol_route(struct net *net, struct fib6_table *table,
int ifindex, struct flowi6 *fl6,
const struct sk_buff *skb, int flags);
void ip6_route_init_special_entries(void);
int ip6_route_init(void);
void ip6_route_cleanup(void);
int ipv6_route_ioctl(struct net *net, unsigned int cmd, void __user *arg);
int ip6_route_add(struct fib6_config *cfg, struct netlink_ext_ack *extack);
int ip6_ins_rt(struct rt6_info *);
int ip6_del_rt(struct rt6_info *);
void rt6_flush_exceptions(struct rt6_info *rt);
int rt6_remove_exception_rt(struct rt6_info *rt);
void rt6_age_exceptions(struct rt6_info *rt, struct fib6_gc_args *gc_args,
unsigned long now);
static inline int ip6_route_get_saddr(struct net *net, struct rt6_info *rt,
const struct in6_addr *daddr,
unsigned int prefs,
struct in6_addr *saddr)
{
struct inet6_dev *idev =
rt ? ip6_dst_idev((struct dst_entry *)rt) : NULL;
int err = 0;
if (rt && rt->rt6i_prefsrc.plen)
*saddr = rt->rt6i_prefsrc.addr;
else
err = ipv6_dev_get_saddr(net, idev ? idev->dev : NULL,
daddr, prefs, saddr);
return err;
}
struct rt6_info *rt6_lookup(struct net *net, const struct in6_addr *daddr,
const struct in6_addr *saddr, int oif,
const struct sk_buff *skb, int flags);
u32 rt6_multipath_hash(const struct net *net, const struct flowi6 *fl6,
const struct sk_buff *skb, struct flow_keys *hkeys);
struct dst_entry *icmp6_dst_alloc(struct net_device *dev, struct flowi6 *fl6);
void fib6_force_start_gc(struct net *net);
struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev,
const struct in6_addr *addr, bool anycast);
struct rt6_info *ip6_dst_alloc(struct net *net, struct net_device *dev,
int flags);
/*
* support functions for ND
*
*/
struct rt6_info *rt6_get_dflt_router(const struct in6_addr *addr,
struct net_device *dev);
struct rt6_info *rt6_add_dflt_router(const struct in6_addr *gwaddr,
struct net_device *dev, unsigned int pref);
void rt6_purge_dflt_routers(struct net *net);
int rt6_route_rcv(struct net_device *dev, u8 *opt, int len,
const struct in6_addr *gwaddr);
void ip6_update_pmtu(struct sk_buff *skb, struct net *net, __be32 mtu, int oif,
u32 mark, kuid_t uid);
void ip6_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, __be32 mtu);
void ip6_redirect(struct sk_buff *skb, struct net *net, int oif, u32 mark,
kuid_t uid);
void ip6_redirect_no_header(struct sk_buff *skb, struct net *net, int oif,
u32 mark);
void ip6_sk_redirect(struct sk_buff *skb, struct sock *sk);
struct netlink_callback;
struct rt6_rtnl_dump_arg {
struct sk_buff *skb;
struct netlink_callback *cb;
struct net *net;
};
int rt6_dump_route(struct rt6_info *rt, void *p_arg);
void rt6_mtu_change(struct net_device *dev, unsigned int mtu);
void rt6_remove_prefsrc(struct inet6_ifaddr *ifp);
void rt6_clean_tohost(struct net *net, struct in6_addr *gateway);
void rt6_sync_up(struct net_device *dev, unsigned int nh_flags);
void rt6_disable_ip(struct net_device *dev, unsigned long event);
void rt6_sync_down_dev(struct net_device *dev, unsigned long event);
void rt6_multipath_rebalance(struct rt6_info *rt);
xfrm: reuse uncached_list to track xdsts In early time, when freeing a xdst, it would be inserted into dst_garbage.list first. Then if it's refcnt was still held somewhere, later it would be put into dst_busy_list in dst_gc_task(). When one dev was being unregistered, the dev of these dsts in dst_busy_list would be set with loopback_dev and put this dev. So that this dev's removal wouldn't get blocked, and avoid the kmsg warning: kernel:unregister_netdevice: waiting for veth0 to become \ free. Usage count = 2 However after Commit 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle"), the xdst will not be freed with dst gc, and this warning happens. To fix it, we need to find these xdsts that are still held by others when removing the dev, and free xdst's dev and set it with loopback_dev. But unfortunately after flow_cache for xfrm was deleted, no list tracks them anymore. So we need to save these xdsts somewhere to release the xdst's dev later. To make this easier, this patch is to reuse uncached_list to track xdsts, so that the dev refcnt can be released in the event NETDEV_UNREGISTER process of fib_netdev_notifier. Thanks to Florian, we could move forward this fix quickly. Fixes: 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") Reported-by: Jianlin Shi <jishi@redhat.com> Reported-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-02-14 19:06:02 +08:00
void rt6_uncached_list_add(struct rt6_info *rt);
void rt6_uncached_list_del(struct rt6_info *rt);
static inline const struct rt6_info *skb_rt6_info(const struct sk_buff *skb)
{
const struct dst_entry *dst = skb_dst(skb);
const struct rt6_info *rt6 = NULL;
if (dst)
rt6 = container_of(dst, struct rt6_info, dst);
return rt6;
}
/*
* Store a destination cache entry in a socket
*/
static inline void ip6_dst_store(struct sock *sk, struct dst_entry *dst,
const struct in6_addr *daddr,
const struct in6_addr *saddr)
{
struct ipv6_pinfo *np = inet6_sk(sk);
np->dst_cookie = rt6_get_cookie((struct rt6_info *)dst);
[IPV6]: Added GSO support for TCPv6 This patch adds GSO support for IPv6 and TCPv6. This is based on a patch by Ananda Raju <Ananda.Raju@neterion.com>. His original description is: This patch enables TSO over IPv6. Currently Linux network stacks restricts TSO over IPv6 by clearing of the NETIF_F_TSO bit from "dev->features". This patch will remove this restriction. This patch will introduce a new flag NETIF_F_TSO6 which will be used to check whether device supports TSO over IPv6. If device support TSO over IPv6 then we don't clear of NETIF_F_TSO and which will make the TCP layer to create TSO packets. Any device supporting TSO over IPv6 will set NETIF_F_TSO6 flag in "dev->features" along with NETIF_F_TSO. In case when user disables TSO using ethtool, NETIF_F_TSO will get cleared from "dev->features". So even if we have NETIF_F_TSO6 we don't get TSO packets created by TCP layer. SKB_GSO_TCPV4 renamed to SKB_GSO_TCP to make it generic GSO packet. SKB_GSO_UDPV4 renamed to SKB_GSO_UDP as UFO is not a IPv4 feature. UFO is supported over IPv6 also The following table shows there is significant improvement in throughput with normal frames and CPU usage for both normal and jumbo. -------------------------------------------------- | | 1500 | 9600 | | ------------------|-------------------| | | thru CPU | thru CPU | -------------------------------------------------- | TSO OFF | 2.00 5.5% id | 5.66 20.0% id | -------------------------------------------------- | TSO ON | 2.63 78.0 id | 5.67 39.0% id | -------------------------------------------------- Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-01 04:37:03 +08:00
sk_setup_caps(sk, dst);
np->daddr_cache = daddr;
#ifdef CONFIG_IPV6_SUBTREES
np->saddr_cache = saddr;
#endif
}
void ip6_sk_dst_store_flow(struct sock *sk, struct dst_entry *dst,
const struct flowi6 *fl6);
static inline bool ipv6_unicast_destination(const struct sk_buff *skb)
{
struct rt6_info *rt = (struct rt6_info *) skb_dst(skb);
return rt->rt6i_flags & RTF_LOCAL;
}
static inline bool ipv6_anycast_destination(const struct dst_entry *dst,
const struct in6_addr *daddr)
{
struct rt6_info *rt = (struct rt6_info *)dst;
return rt->rt6i_flags & RTF_ANYCAST ||
ip6: fix PMTU discovery when using /127 subnets The definition of an "anycast destination address" has been tweaked as a side-effect of commit 2647a9b07032 ("ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST"). The first address of a point-to-point /127 subnet is now considered as an anycast address. This prevents ICMPv6 errors to be returned to a sender of such a subnet and breaks PMTU discovery. This can be reproduced with: ip link add name out6 type veth peer name in6 ip link add name out7 type veth peer name in7 ip link set mtu 1400 dev out7 ip link set mtu 1400 dev in7 ip netns add next-hop ip netns add next-next-hop ip link set netns next-hop dev in6 ip link set netns next-hop dev out7 ip link set netns next-next-hop dev in7 ip link set up dev out6 ip addr add 2001:db8:1::12/127 dev out6 ip netns exec next-hop ip link set up dev in6 ip netns exec next-hop ip link set up dev out7 ip netns exec next-hop ip addr add 2001:db8:1::13/127 dev in6 ip netns exec next-hop ip addr add 2001:db8:1::14/127 dev out7 ip netns exec next-hop ip route add default via 2001:db8:1::15 ip netns exec next-hop sysctl -qw net.ipv6.conf.all.forwarding=1 ip netns exec next-next-hop ip link set up dev in7 ip netns exec next-next-hop ip addr add 2001:db8:1::15/127 dev in7 ip netns exec next-next-hop ip addr add 2001:db8:1::50/128 dev in7 ip netns exec next-next-hop ip route add default via 2001:db8:1::14 ip netns exec next-next-hop sysctl -qw net.ipv6.conf.all.forwarding=1 ip route add 2001:db8:1::48/123 via 2001:db8:1::13 sleep 4 ping -M do -s 1452 -c 3 2001:db8:1::50 || true ip route get 2001:db8:1::50 Before the patch, we get: 2001:db8:1::50 from :: via 2001:db8:1::13 dev out6 src 2001:db8:1::12 metric 1024 pref medium After the patch, we get: 2001:db8:1::50 via 2001:db8:1::13 dev out6 src 2001:db8:1::12 metric 0 cache expires 578sec mtu 1400 pref medium Fixes: 2647a9b07032 ("ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST") Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16 01:40:20 +08:00
(rt->rt6i_dst.plen < 127 &&
ipv6_addr_equal(&rt->rt6i_dst.addr, daddr));
}
int ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
int (*output)(struct net *, struct sock *, struct sk_buff *));
static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
{
struct ipv6_pinfo *np = skb->sk && !dev_recursion_level() ?
inet6_sk(skb->sk) : NULL;
return (np && np->pmtudisc >= IPV6_PMTUDISC_PROBE) ?
skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
}
static inline bool ip6_sk_accept_pmtu(const struct sock *sk)
{
return inet6_sk(sk)->pmtudisc != IPV6_PMTUDISC_INTERFACE &&
inet6_sk(sk)->pmtudisc != IPV6_PMTUDISC_OMIT;
}
static inline bool ip6_sk_ignore_df(const struct sock *sk)
{
return inet6_sk(sk)->pmtudisc < IPV6_PMTUDISC_DO ||
inet6_sk(sk)->pmtudisc == IPV6_PMTUDISC_OMIT;
}
static inline struct in6_addr *rt6_nexthop(struct rt6_info *rt,
struct in6_addr *daddr)
{
if (rt->rt6i_flags & RTF_GATEWAY)
return &rt->rt6i_gateway;
else if (unlikely(rt->rt6i_flags & RTF_CACHE))
return &rt->rt6i_dst.addr;
else
return daddr;
}
static inline bool rt6_duplicate_nexthop(struct rt6_info *a, struct rt6_info *b)
{
return a->dst.dev == b->dst.dev &&
a->rt6i_idev == b->rt6i_idev &&
ipv6_addr_equal(&a->rt6i_gateway, &b->rt6i_gateway) &&
!lwtunnel_cmp_encap(a->dst.lwtstate, b->dst.lwtstate);
}
#endif