linux_old1/drivers/media/platform/Kconfig

298 lines
8.3 KiB
Plaintext
Raw Normal View History

if MEDIA_CAMERA_SUPPORT
config VIDEO_VIVI
tristate "Virtual Video Driver"
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
select FONT_8x16
select VIDEOBUF2_VMALLOC
default n
---help---
Enables a virtual video driver. This device shows a color bar
and a timestamp, as a real device would generate by using V4L2
api.
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
#
# Platform drivers
# All drivers here are currently for webcam support
menuconfig V4L_PLATFORM_DRIVERS
bool "V4L platform devices"
depends on MEDIA_CAMERA_SUPPORT
default n
---help---
Say Y here to enable support for platform-specific V4L drivers.
if V4L_PLATFORM_DRIVERS
source "drivers/media/platform/marvell-ccic/Kconfig"
config VIDEO_VIA_CAMERA
tristate "VIAFB camera controller support"
depends on FB_VIA
select VIDEOBUF_DMA_SG
select VIDEO_OV7670
help
Driver support for the integrated camera controller in VIA
Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
with ov7670 sensors.
#
# Platform multimedia device configuration
#
source "drivers/media/platform/davinci/Kconfig"
source "drivers/media/platform/omap/Kconfig"
source "drivers/media/platform/blackfin/Kconfig"
config VIDEO_SH_VOU
tristate "SuperH VOU video output driver"
depends on VIDEO_DEV && ARCH_SHMOBILE
select VIDEOBUF_DMA_CONTIG
help
Support for the Video Output Unit (VOU) on SuperH SoCs.
config VIDEO_VIU
tristate "Freescale VIU Video Driver"
depends on VIDEO_V4L2 && PPC_MPC512x
select VIDEOBUF_DMA_CONTIG
default y
---help---
Support for Freescale VIU video driver. This device captures
video data, or overlays video on DIU frame buffer.
Say Y here if you want to enable VIU device on MPC5121e Rev2+.
In doubt, say N.
config VIDEO_TIMBERDALE
tristate "Support for timberdale Video In/LogiWIN"
depends on VIDEO_V4L2 && I2C && DMADEVICES
select DMA_ENGINE
select TIMB_DMA
select VIDEO_ADV7180
select VIDEOBUF_DMA_CONTIG
---help---
Add support for the Video In peripherial of the timberdale FPGA.
config VIDEO_VINO
tristate "SGI Vino Video For Linux"
depends on I2C && SGI_IP22 && VIDEO_V4L2
select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
help
Say Y here to build in support for the Vino video input system found
on SGI Indy machines.
config VIDEO_M32R_AR
tristate "AR devices"
depends on M32R && VIDEO_V4L2
---help---
This is a video4linux driver for the Renesas AR (Artificial Retina)
camera module.
config VIDEO_M32R_AR_M64278
tristate "AR device with color module M64278(VGA)"
depends on PLAT_M32700UT
select VIDEO_M32R_AR
---help---
This is a video4linux driver for the Renesas AR (Artificial
Retina) with M64278E-800 camera module.
This module supports VGA(640x480 pixels) resolutions.
To compile this driver as a module, choose M here: the
module will be called arv.
config VIDEO_OMAP3
tristate "OMAP 3 Camera support (EXPERIMENTAL)"
depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
---help---
Driver for an OMAP 3 camera controller.
config VIDEO_OMAP3_DEBUG
bool "OMAP 3 Camera debug messages"
depends on VIDEO_OMAP3
---help---
Enable debug messages on OMAP 3 camera controller driver.
config SOC_CAMERA
tristate "SoC camera support"
depends on VIDEO_V4L2 && HAS_DMA && I2C
select VIDEOBUF_GEN
select VIDEOBUF2_CORE
help
SoC Camera is a common API to several cameras, not connecting
over a bus like PCI or USB. For example some i2c camera connected
directly to the data bus of an SoC.
config SOC_CAMERA_PLATFORM
tristate "platform camera support"
depends on SOC_CAMERA
help
This is a generic SoC camera platform driver, useful for testing
config MX1_VIDEO
bool
config VIDEO_MX1
tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
select FIQ
select VIDEOBUF_DMA_CONTIG
select MX1_VIDEO
---help---
This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
config MX3_VIDEO
bool
config VIDEO_MX3
tristate "i.MX3x Camera Sensor Interface driver"
depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
select VIDEOBUF2_DMA_CONTIG
select MX3_VIDEO
---help---
This is a v4l2 driver for the i.MX3x Camera Sensor Interface
config VIDEO_PXA27x
tristate "PXA27x Quick Capture Interface driver"
depends on VIDEO_DEV && PXA27x && SOC_CAMERA
select VIDEOBUF_DMA_SG
---help---
This is a v4l2 driver for the PXA27x Quick Capture Interface
config VIDEO_SH_MOBILE_CSI2
tristate "SuperH Mobile MIPI CSI-2 Interface driver"
depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK
---help---
This is a v4l2 driver for the SuperH MIPI CSI-2 Interface
config VIDEO_SH_MOBILE_CEU
tristate "SuperH Mobile CEU Interface driver"
depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
select VIDEOBUF2_DMA_CONTIG
---help---
This is a v4l2 driver for the SuperH Mobile CEU Interface
[media] SoC Camera: add driver for OMAP1 camera interface This is a V4L2 driver for TI OMAP1 SoC camera interface. Both videobuf-dma versions are supported, contig and sg, selectable with a module option. The former uses less processing power, but often fails to allocate contignuous buffer memory. The latter is free of this problem, but generates tens of DMA interrupts per frame. If contig memory allocation ever fails, the driver falls back to sg automatically on next open, but still can be switched back to contig manually. Both paths work stable for me, even under heavy load, on my OMAP1510 based Amstrad Delta videophone, that is the oldest, least powerfull OMAP1 implementation. The interface generally works in pass-through mode. Since input data byte endianess can be swapped, it provides up to two v4l2 pixel formats per each of several soc_mbus formats that have their swapped endian counterparts. Boards using this driver can provide it with the following platform data: - if and what freqency clock is expected by an on-board camera sensor, - what is the maximum pixel clock that should be accepted from the sensor, - what is the polarity of the sensor provided pixel clock, - if the interface GPIO line is connected to a sensor reset/powerdown input and what is the input polarity. Created and tested against linux-2.6.36-rc5 on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-30 19:35:49 +08:00
config VIDEO_OMAP1
tristate "OMAP1 Camera Interface driver"
depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
select VIDEOBUF_DMA_SG
---help---
This is a v4l2 driver for the TI OMAP1 camera interface
config VIDEO_OMAP2
tristate "OMAP2 Camera Capture Interface driver"
depends on VIDEO_DEV && ARCH_OMAP2
select VIDEOBUF_DMA_SG
---help---
This is a v4l2 driver for the TI OMAP2 camera capture interface
config VIDEO_MX2_HOSTSUPPORT
bool
config VIDEO_MX2
tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || (ARCH_MX25 && BROKEN))
select VIDEOBUF2_DMA_CONTIG
select VIDEO_MX2_HOSTSUPPORT
---help---
This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
Interface
config VIDEO_ATMEL_ISI
tristate "ATMEL Image Sensor Interface (ISI) support"
depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91
select VIDEOBUF2_DMA_CONTIG
---help---
This module makes the ATMEL Image Sensor Interface available
as a v4l2 device.
source "drivers/media/platform/s5p-fimc/Kconfig"
source "drivers/media/platform/s5p-tv/Kconfig"
endif # V4L_PLATFORM_DRIVERS
menuconfig V4L_MEM2MEM_DRIVERS
bool "Memory-to-memory multimedia devices"
depends on VIDEO_V4L2
default n
---help---
Say Y here to enable selecting drivers for V4L devices that
use system memory for both source and destination buffers, as opposed
to capture and output drivers, which use memory buffers for just
one of those.
if V4L_MEM2MEM_DRIVERS
config VIDEO_MEM2MEM_TESTDEV
tristate "Virtual test device for mem2mem framework"
depends on VIDEO_DEV && VIDEO_V4L2
select VIDEOBUF2_VMALLOC
select V4L2_MEM2MEM_DEV
default n
---help---
This is a virtual test device for the memory-to-memory driver
framework.
config VIDEO_CODA
tristate "Chips&Media Coda multi-standard codec IP"
depends on VIDEO_DEV && VIDEO_V4L2
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
---help---
Coda is a range of video codec IPs that supports
H.264, MPEG-4, and other video formats.
config VIDEO_MEM2MEM_DEINTERLACE
tristate "Deinterlace support"
depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
Generic deinterlacing V4L2 driver.
config VIDEO_SAMSUNG_S5P_G2D
tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
default n
---help---
This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
2d graphics accelerator.
config VIDEO_SAMSUNG_S5P_JPEG
tristate "Samsung S5P/Exynos4 JPEG codec driver (EXPERIMENTAL)"
depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P && EXPERIMENTAL
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
---help---
This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec
config VIDEO_SAMSUNG_S5P_MFC
tristate "Samsung S5P MFC 5.1 Video Codec"
depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
select VIDEOBUF2_DMA_CONTIG
default n
help
MFC 5.1 driver for V4L2.
config VIDEO_MX2_EMMAPRP
tristate "MX2 eMMa-PrP support"
depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
MX2X chips have a PrP that can be used to process buffers from
memory to memory. Operations include resizing and format
conversion.
endif # V4L_MEM2MEM_DRIVERS
endif # MEDIA_CAMERA_SUPPORT