p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/pci/host/Kconfig

58 lines
1.4 KiB
Plaintext
Raw Normal View History

pci: PCIe driver for Marvell Armada 370/XP systems This driver implements the support for the PCIe interfaces on the Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to cover earlier families of Marvell SoCs, such as Dove, Orion and Kirkwood. The driver implements the hw_pci operations needed by the core ARM PCI code to setup PCI devices and get their corresponding IRQs, and the pci_ops operations that are used by the PCI core to read/write the configuration space of PCI devices. Since the PCIe interfaces of Marvell SoCs are completely separate and not linked together in a bus, this driver sets up an emulated PCI host bridge, with one PCI-to-PCI bridge as child for each hardware PCIe interface. In addition, this driver enumerates the different PCIe slots, and for those having a device plugged in, it sets up the necessary address decoding windows, using the mvebu-mbus driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-16 23:55:22 +08:00
menu "PCI host controller drivers"
depends on PCI
config PCI_MVEBU
bool "Marvell EBU PCIe controller"
PCI: mvebu: add support for Marvell Dove SoCs This patch adds a compatible for the PCIe controller found on Marvell Dove SoCs. Binding documentation and Kconfig entry are also updated. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-13 20:25:24 +08:00
depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD
PCI: mvebu: Make Marvell PCIe driver depend on OF The Marvell PCIe host controller driver is heavily tied to Device Tree APIs, and can only be used on platforms where the Device Tree is used. Therefore, it should "depends on OF" to avoid build failures on !OF configurations. Reported-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-09 18:35:50 +08:00
depends on OF
pci: PCIe driver for Marvell Armada 370/XP systems This driver implements the support for the PCIe interfaces on the Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to cover earlier families of Marvell SoCs, such as Dove, Orion and Kirkwood. The driver implements the hw_pci operations needed by the core ARM PCI code to setup PCI devices and get their corresponding IRQs, and the pci_ops operations that are used by the PCI core to read/write the configuration space of PCI devices. Since the PCIe interfaces of Marvell SoCs are completely separate and not linked together in a bus, this driver sets up an emulated PCI host bridge, with one PCI-to-PCI bridge as child for each hardware PCIe interface. In addition, this driver enumerates the different PCIe slots, and for those having a device plugged in, it sets up the necessary address decoding windows, using the mvebu-mbus driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-16 23:55:22 +08:00
pci: Add PCIe driver for Samsung Exynos Exynos5440 has a PCIe controller which can be used as Root Complex. This driver supports a PCIe controller as Root Complex mode. Signed-off-by: Surendranath Gurivireddy Balla <suren.reddy@samsung.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Mohit KUMAR <Mohit.KUMAR@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21 15:24:54 +08:00
config PCIE_DW
bool
config PCI_EXYNOS
bool "Samsung Exynos PCIe controller"
depends on SOC_EXYNOS5440
select PCIEPORTBUS
select PCIE_DW
PCI: imx6: Add support for i.MX6 PCIe controller Add support for the PCIe port present on the i.MX6 family of controllers. These use the Synopsis Designware core tied to their own PHY. Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-09-26 11:24:47 +08:00
config PCI_IMX6
bool "Freescale i.MX6 PCIe controller"
depends on SOC_IMX6Q
select PCIEPORTBUS
select PCIE_DW
PCI: tegra: Move PCIe driver to drivers/pci/host Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host directory. The motivation is to collect various host controller drivers in the same location in order to facilitate refactoring. The Tegra PCIe driver has been largely rewritten, both in order to turn it into a proper platform driver and to add MSI (based on code by Krishna Kishore <kthota@nvidia.com>) as well as device tree support. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [swarren, split DT changes into a separate patch in another branch] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-09 22:49:19 +08:00
config PCI_TEGRA
bool "NVIDIA Tegra PCIe controller"
depends on ARCH_TEGRA
PCI: Add R-Car Gen2 internal PCI support This adds internal PCI controller driver for R-Car Gen2 SoC. There are three PCI controllers available with only a single EHCI/OHCI device built-in on each PCI bus. This gives us three USB channels. Channel 0 is shared with the USBHS device, while channel 2 is shared with the USBSS. The PCI controllers do not support I/O port space mapping, and it is not needed here. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-10-30 00:12:51 +08:00
config PCI_RCAR_GEN2
bool "Renesas R-Car Gen2 Internal PCI controller"
PCI: rcar: Make the Kconfig dependencies more generic Update the R-Car Generation 2 PCI driver Kconfig dependencies to follow same style as other drivers - no SoC dependencies. Also, update the COMPILE_TEST bits to depend on ARM. This since the DMA bounce buffer and dma_ops handling code is ARM specific. [bhelgaas: adjust context after dropping DMABOUNCE patches] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-18 10:12:01 +08:00
depends on ARCH_SHMOBILE || (ARM && COMPILE_TEST)
PCI: Add R-Car Gen2 internal PCI support This adds internal PCI controller driver for R-Car Gen2 SoC. There are three PCI controllers available with only a single EHCI/OHCI device built-in on each PCI bus. This gives us three USB channels. Channel 0 is shared with the USBHS device, while channel 2 is shared with the USBSS. The PCI controllers do not support I/O port space mapping, and it is not needed here. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-10-30 00:12:51 +08:00
help
Say Y here if you want internal PCI support on R-Car Gen2 SoC.
There are 3 internal PCI controllers available with a single
built-in EHCI/OHCI host controller present on each one.
PCI: rcar: Add Renesas R-Car PCIe driver This PCIe Host driver currently does not support MSI, so cards fall back to INTx interrupts. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-12 18:57:48 +08:00
config PCI_RCAR_GEN2_PCIE
bool "Renesas R-Car PCIe controller"
depends on ARCH_SHMOBILE || (ARM && COMPILE_TEST)
help
Say Y here if you want PCIe controller support on R-Car Gen2 SoCs.
PCI: generic: Add generic PCI host controller driver Add support for a generic PCI host controller, such as a firmware-initialised device with static windows or an emulation by something such as kvmtool. The controller itself has no configuration registers and has its address spaces described entirely by the device-tree (using the bindings from ePAPR). Both CAM and ECAM are supported for Config Space accesses. Add corresponding documentation for the DT binding. [bhelgaas: currently uses the ARM-specific pci_common_init_dev() interface] Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
2013-11-23 00:14:41 +08:00
config PCI_HOST_GENERIC
bool "Generic PCI host controller"
depends on ARM && OF
help
Say Y here if you want to support a simple generic PCI host
controller, such as the one emulated by kvmtool.
PCI: spear: Add PCIe driver for ST Microelectronics SPEAr13xx ARM based ST Microelectronics's SPEAr1310 and SPEAr1340 SOCs have onchip designware PCIe controller. To make that usable, this patch adds a wrapper driver based on existing designware driver. Adds bindings for this new driver and update MAINTAINERS as well. Cc: linux-pci@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Mohit Kumar <mohit.kumar@st.com> [viresh: fixed logs/cclist/checkpatch warnings, broken into smaller patches] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-02-11 14:09:26 +08:00
config PCIE_SPEAR13XX
tristate "STMicroelectronics SPEAr PCIe controller"
depends on ARCH_SPEAR13XX
select PCIEPORTBUS
select PCIE_DW
help
Say Y here if you want PCIe support on SPEAr13XX SoCs.
pci: PCIe driver for Marvell Armada 370/XP systems This driver implements the support for the PCIe interfaces on the Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to cover earlier families of Marvell SoCs, such as Dove, Orion and Kirkwood. The driver implements the hw_pci operations needed by the core ARM PCI code to setup PCI devices and get their corresponding IRQs, and the pci_ops operations that are used by the PCI core to read/write the configuration space of PCI devices. Since the PCIe interfaces of Marvell SoCs are completely separate and not linked together in a bus, this driver sets up an emulated PCI host bridge, with one PCI-to-PCI bridge as child for each hardware PCIe interface. In addition, this driver enumerates the different PCIe slots, and for those having a device plugged in, it sets up the necessary address decoding windows, using the mvebu-mbus driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-16 23:55:22 +08:00
endmenu