2007-05-21 18:09:31 +08:00
/*
2009-09-24 22:11:24 +08:00
* Copyright 2007 - 2008 Analog Devices Inc .
2007-05-21 18:09:31 +08:00
*
2009-09-24 22:11:24 +08:00
* Licensed under the ADI BSD license or the GPL - 2 ( or later )
2007-05-21 18:09:31 +08:00
*/
# ifndef _DEF_BF527_H
# define _DEF_BF527_H
/* Include all Core registers and bit definitions */
2008-08-27 10:51:02 +08:00
# include <asm/def_LPBlackfin.h>
2007-05-21 18:09:31 +08:00
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
2007-10-21 16:54:27 +08:00
# include "defBF52x_base.h"
2007-05-21 18:09:31 +08:00
/* The following are the #defines needed by ADSP-BF527 that are not in the common header */
/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
# define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */
# define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */
# define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */
# define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */
# define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */
# define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */
# define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */
# define EMAC_FLC 0xFFC0301C /* Flow Control Register */
# define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */
# define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */
# define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */
# define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */
# define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */
# define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */
# define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */
# define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */
# define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */
# define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */
# define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */
# define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */
# define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */
# define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */
# define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */
# define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */
# define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */
# define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */
# define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */
# define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */
# define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */
# define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */
# define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */
# define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */
# define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */
# define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */
# define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */
# define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */
# define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */
# define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */
# define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */
# define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */
# define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */
# define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */
# define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */
# define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */
# define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */
# define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */
# define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */
# define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */
# define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */
# define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */
# define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */
# define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */
# define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
# define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
# define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
# define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */
# define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */
# define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */
# define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */
# define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */
# define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */
# define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */
# define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */
# define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */
# define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */
# define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */
# define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */
# define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */
# define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */
# define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */
# define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */
# define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */
# define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */
# define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */
# define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
# define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */
# define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
# define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */
# define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */
/* Listing for IEEE-Supported Count Registers */
# define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */
# define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */
# define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */
# define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */
# define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */
# define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */
# define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */
# define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */
# define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */
# define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */
# define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */
# define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */
# define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */
# define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */
# define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */
# define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */
# define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */
# define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */
# define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */
# define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */
# define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
# define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
# define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
# define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */
# define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */
# define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */
# define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */
# define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */
# define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */
# define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */
# define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */
# define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */
# define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */
# define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */
# define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */
# define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */
# define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */
# define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */
# define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */
# define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */
# define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */
# define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */
# define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
# define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */
# define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
# define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */
# define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */
/***********************************************************************************
* * System MMR Register Bits And Macros
* *
* * Disclaimer : All macros are intended to make C and Assembly code more readable .
* * Use these macros carefully , as any that do left shifts for field
* * depositing will result in the lower order bits being destroyed . Any
* * macro that shifts left to properly position the bit - field should be
* * used as part of an OR to initialize a register and NOT as a dynamic
* * modifier UNLESS the lower order bits are saved and ORed back in when
* * the macro is used .
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/
/* EMAC_OPMODE Masks */
# define RE 0x00000001 /* Receiver Enable */
# define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */
# define HU 0x00000010 /* Hash Filter Unicast Address */
# define HM 0x00000020 /* Hash Filter Multicast Address */
# define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */
# define PR 0x00000080 /* Promiscuous Mode Enable */
# define IFE 0x00000100 /* Inverse Filtering Enable */
# define DBF 0x00000200 /* Disable Broadcast Frame Reception */
# define PBF 0x00000400 /* Pass Bad Frames Enable */
# define PSF 0x00000800 /* Pass Short Frames Enable */
# define RAF 0x00001000 /* Receive-All Mode */
# define TE 0x00010000 /* Transmitter Enable */
# define DTXPAD 0x00020000 /* Disable Automatic TX Padding */
# define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */
# define DC 0x00080000 /* Deferral Check */
# define BOLMT 0x00300000 /* Back-Off Limit */
# define BOLMT_10 0x00000000 /* 10-bit range */
# define BOLMT_8 0x00100000 /* 8-bit range */
# define BOLMT_4 0x00200000 /* 4-bit range */
# define BOLMT_1 0x00300000 /* 1-bit range */
# define DRTY 0x00400000 /* Disable TX Retry On Collision */
# define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */
# define RMII 0x01000000 /* RMII/MII* Mode */
# define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */
# define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */
# define LB 0x08000000 /* Internal Loopback Enable */
# define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */
/* EMAC_STAADD Masks */
# define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */
# define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */
# define STADISPRE 0x00000004 /* Disable Preamble Generation */
# define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */
# define REGAD 0x000007C0 /* STA Register Address */
# define PHYAD 0x0000F800 /* PHY Device Address */
# define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */
# define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */
/* EMAC_STADAT Mask */
# define STADATA 0x0000FFFF /* Station Management Data */
/* EMAC_FLC Masks */
# define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */
# define FLCE 0x00000002 /* Flow Control Enable */
# define PCF 0x00000004 /* Pass Control Frames */
# define BKPRSEN 0x00000008 /* Enable Backpressure */
# define FLCPAUSE 0xFFFF0000 /* Pause Time */
# define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */
/* EMAC_WKUP_CTL Masks */
# define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */
# define MPKE 0x00000002 /* Magic Packet Enable */
# define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */
# define GUWKE 0x00000008 /* Global Unicast Wake Enable */
# define MPKS 0x00000020 /* Magic Packet Received Status */
# define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */
/* EMAC_WKUP_FFCMD Masks */
# define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */
# define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */
# define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */
# define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */
# define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */
# define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */
# define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */
# define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */
/* EMAC_WKUP_FFOFF Masks */
# define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */
# define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */
# define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */
# define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */
# define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */
# define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */
# define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */
# define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */
/* Set ALL Offsets */
# define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
/* EMAC_WKUP_FFCRC0 Masks */
# define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */
# define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */
# define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */
# define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */
/* EMAC_WKUP_FFCRC1 Masks */
# define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */
# define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */
# define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */
# define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */
/* EMAC_SYSCTL Masks */
# define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */
# define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */
# define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */
2008-07-15 12:08:50 +08:00
# define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */
2007-05-21 18:09:31 +08:00
# define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */
# define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */
/* EMAC_SYSTAT Masks */
# define PHYINT 0x00000001 /* PHY_INT Interrupt Status */
# define MMCINT 0x00000002 /* MMC Counter Interrupt Status */
# define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */
# define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */
# define WAKEDET 0x00000010 /* Wake-Up Detected Status */
# define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */
# define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */
# define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */
/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
# define RX_FRLEN 0x000007FF /* Frame Length In Bytes */
# define RX_COMP 0x00001000 /* RX Frame Complete */
# define RX_OK 0x00002000 /* RX Frame Received With No Errors */
# define RX_LONG 0x00004000 /* RX Frame Too Long Error */
# define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */
# define RX_CRC 0x00010000 /* RX Frame CRC Error */
# define RX_LEN 0x00020000 /* RX Frame Length Error */
# define RX_FRAG 0x00040000 /* RX Frame Fragment Error */
# define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */
# define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */
# define RX_PHY 0x00200000 /* RX Frame PHY Error */
# define RX_LATE 0x00400000 /* RX Frame Late Collision Error */
# define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */
# define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */
# define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */
# define RX_CTL 0x04000000 /* RX Control Frame Indicator */
# define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */
# define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */
# define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */
# define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */
# define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */
/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */
# define TX_COMP 0x00000001 /* TX Frame Complete */
# define TX_OK 0x00000002 /* TX Frame Sent With No Errors */
# define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */
# define TX_LATE 0x00000008 /* TX Frame Late Collision Error */
# define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */
# define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */
# define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */
# define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */
# define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */
# define TX_CCNT 0x00000F00 /* TX Frame Collision Count */
# define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */
# define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */
# define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */
# define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */
# define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */
/* EMAC_MMC_CTL Masks */
# define RSTC 0x00000001 /* Reset All Counters */
# define CROLL 0x00000002 /* Counter Roll-Over Enable */
# define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */
# define MMCE 0x00000008 /* Enable MMC Counter Operation */
/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
# define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */
# define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */
# define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */
# define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */
# define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */
# define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */
# define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */
# define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */
# define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */
# define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */
# define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */
# define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */
# define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */
# define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */
# define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */
# define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */
# define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */
# define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */
# define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */
# define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */
# define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */
# define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */
# define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */
# define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */
/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */
# define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */
# define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */
# define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */
# define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */
# define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */
# define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */
# define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */
# define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */
# define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */
# define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */
# define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */
# define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */
# define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */
# define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */
# define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */
# define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */
# define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */
# define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */
# define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */
# define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */
# define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */
# define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */
# define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */
/* USB Control Registers */
# define USB_FADDR 0xffc03800 /* Function address register */
# define USB_POWER 0xffc03804 /* Power management register */
# define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
# define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */
# define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */
# define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */
# define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */
# define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */
# define USB_FRAME 0xffc03820 /* USB frame number */
# define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */
# define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */
# define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
# define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */
/* USB Packet Control Registers */
# define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */
# define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
# define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
# define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */
# define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */
# define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
# define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
# define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
# define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
# define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
# define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
# define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
# define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */
/* USB Endpoint FIFO Registers */
# define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */
# define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */
# define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */
# define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */
# define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */
# define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */
# define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */
# define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */
/* USB OTG Control Registers */
# define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */
# define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */
# define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */
/* USB Phy Control Registers */
# define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */
# define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */
# define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */
# define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */
# define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */
/* (APHY_CNTRL is for ADI usage only) */
# define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */
/* (APHY_CALIB is for ADI usage only) */
# define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */
# define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
/* (PHY_TEST is for ADI usage only) */
# define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */
# define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */
# define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
/* USB Endpoint 0 Control Registers */
# define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */
# define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */
# define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */
# define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */
# define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */
# define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
# define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */
# define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
# define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
# define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
/* USB Endpoint 1 Control Registers */
# define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */
# define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */
# define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */
# define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */
# define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */
# define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
# define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */
# define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
# define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
# define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
/* USB Endpoint 2 Control Registers */
# define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */
# define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */
# define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */
# define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */
# define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */
# define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
# define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */
# define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
# define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
# define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
/* USB Endpoint 3 Control Registers */
# define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */
# define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */
# define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */
# define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */
# define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */
# define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
# define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */
# define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
# define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
# define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
/* USB Endpoint 4 Control Registers */
# define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */
# define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */
# define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */
# define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */
# define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */
# define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
# define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */
# define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
# define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
# define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
/* USB Endpoint 5 Control Registers */
# define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */
# define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */
# define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */
# define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */
# define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */
# define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
# define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */
# define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
# define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
# define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */
/* USB Endpoint 6 Control Registers */
# define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */
# define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */
# define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */
# define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */
# define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */
# define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
# define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */
# define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
# define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
# define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
/* USB Endpoint 7 Control Registers */
# define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */
# define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */
# define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */
# define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */
# define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */
# define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
# define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */
# define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
# define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
# define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
# define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */
/* USB Channel 0 Config Registers */
# define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */
# define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
# define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
# define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
# define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
/* USB Channel 1 Config Registers */
# define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */
# define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
# define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
# define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
# define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
/* USB Channel 2 Config Registers */
# define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */
# define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
# define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
# define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
# define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
/* USB Channel 3 Config Registers */
# define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */
# define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
# define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
# define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
# define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
/* USB Channel 4 Config Registers */
# define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */
# define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
# define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
# define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
# define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
/* USB Channel 5 Config Registers */
# define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */
# define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
# define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
# define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
# define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
/* USB Channel 6 Config Registers */
# define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */
# define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
# define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
# define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
# define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
/* USB Channel 7 Config Registers */
# define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */
# define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
# define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
# define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
# define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
/* Bit masks for USB_FADDR */
# define FUNCTION_ADDRESS 0x7f /* Function address */
/* Bit masks for USB_POWER */
# define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
# define nENABLE_SUSPENDM 0x0
# define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
# define nSUSPEND_MODE 0x0
# define RESUME_MODE 0x4 /* DMA Mode */
# define nRESUME_MODE 0x0
# define RESET 0x8 /* Reset indicator */
# define nRESET 0x0
# define HS_MODE 0x10 /* High Speed mode indicator */
# define nHS_MODE 0x0
# define HS_ENABLE 0x20 /* high Speed Enable */
# define nHS_ENABLE 0x0
# define SOFT_CONN 0x40 /* Soft connect */
# define nSOFT_CONN 0x0
# define ISO_UPDATE 0x80 /* Isochronous update */
# define nISO_UPDATE 0x0
/* Bit masks for USB_INTRTX */
# define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
# define nEP0_TX 0x0
# define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
# define nEP1_TX 0x0
# define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
# define nEP2_TX 0x0
# define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
# define nEP3_TX 0x0
# define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
# define nEP4_TX 0x0
# define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
# define nEP5_TX 0x0
# define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
# define nEP6_TX 0x0
# define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
# define nEP7_TX 0x0
/* Bit masks for USB_INTRRX */
# define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
# define nEP1_RX 0x0
# define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
# define nEP2_RX 0x0
# define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
# define nEP3_RX 0x0
# define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
# define nEP4_RX 0x0
# define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
# define nEP5_RX 0x0
# define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
# define nEP6_RX 0x0
# define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
# define nEP7_RX 0x0
/* Bit masks for USB_INTRTXE */
# define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
# define nEP0_TX_E 0x0
# define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
# define nEP1_TX_E 0x0
# define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
# define nEP2_TX_E 0x0
# define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
# define nEP3_TX_E 0x0
# define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
# define nEP4_TX_E 0x0
# define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
# define nEP5_TX_E 0x0
# define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
# define nEP6_TX_E 0x0
# define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
# define nEP7_TX_E 0x0
/* Bit masks for USB_INTRRXE */
# define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
# define nEP1_RX_E 0x0
# define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
# define nEP2_RX_E 0x0
# define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
# define nEP3_RX_E 0x0
# define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
# define nEP4_RX_E 0x0
# define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
# define nEP5_RX_E 0x0
# define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
# define nEP6_RX_E 0x0
# define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
# define nEP7_RX_E 0x0
/* Bit masks for USB_INTRUSB */
# define SUSPEND_B 0x1 /* Suspend indicator */
# define nSUSPEND_B 0x0
# define RESUME_B 0x2 /* Resume indicator */
# define nRESUME_B 0x0
# define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
# define nRESET_OR_BABLE_B 0x0
# define SOF_B 0x8 /* Start of frame */
# define nSOF_B 0x0
# define CONN_B 0x10 /* Connection indicator */
# define nCONN_B 0x0
# define DISCON_B 0x20 /* Disconnect indicator */
# define nDISCON_B 0x0
# define SESSION_REQ_B 0x40 /* Session Request */
# define nSESSION_REQ_B 0x0
# define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
# define nVBUS_ERROR_B 0x0
/* Bit masks for USB_INTRUSBE */
# define SUSPEND_BE 0x1 /* Suspend indicator int enable */
# define nSUSPEND_BE 0x0
# define RESUME_BE 0x2 /* Resume indicator int enable */
# define nRESUME_BE 0x0
# define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
# define nRESET_OR_BABLE_BE 0x0
# define SOF_BE 0x8 /* Start of frame int enable */
# define nSOF_BE 0x0
# define CONN_BE 0x10 /* Connection indicator int enable */
# define nCONN_BE 0x0
# define DISCON_BE 0x20 /* Disconnect indicator int enable */
# define nDISCON_BE 0x0
# define SESSION_REQ_BE 0x40 /* Session Request int enable */
# define nSESSION_REQ_BE 0x0
# define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
# define nVBUS_ERROR_BE 0x0
/* Bit masks for USB_FRAME */
# define FRAME_NUMBER 0x7ff /* Frame number */
/* Bit masks for USB_INDEX */
# define SELECTED_ENDPOINT 0xf /* selected endpoint */
/* Bit masks for USB_GLOBAL_CTL */
# define GLOBAL_ENA 0x1 /* enables USB module */
# define nGLOBAL_ENA 0x0
# define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
# define nEP1_TX_ENA 0x0
# define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
# define nEP2_TX_ENA 0x0
# define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
# define nEP3_TX_ENA 0x0
# define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
# define nEP4_TX_ENA 0x0
# define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
# define nEP5_TX_ENA 0x0
# define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
# define nEP6_TX_ENA 0x0
# define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
# define nEP7_TX_ENA 0x0
# define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
# define nEP1_RX_ENA 0x0
# define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
# define nEP2_RX_ENA 0x0
# define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
# define nEP3_RX_ENA 0x0
# define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
# define nEP4_RX_ENA 0x0
# define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
# define nEP5_RX_ENA 0x0
# define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
# define nEP6_RX_ENA 0x0
# define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
# define nEP7_RX_ENA 0x0
/* Bit masks for USB_OTG_DEV_CTL */
# define SESSION 0x1 /* session indicator */
# define nSESSION 0x0
# define HOST_REQ 0x2 /* Host negotiation request */
# define nHOST_REQ 0x0
# define HOST_MODE 0x4 /* indicates USBDRC is a host */
# define nHOST_MODE 0x0
# define VBUS0 0x8 /* Vbus level indicator[0] */
# define nVBUS0 0x0
# define VBUS1 0x10 /* Vbus level indicator[1] */
# define nVBUS1 0x0
# define LSDEV 0x20 /* Low-speed indicator */
# define nLSDEV 0x0
# define FSDEV 0x40 /* Full or High-speed indicator */
# define nFSDEV 0x0
# define B_DEVICE 0x80 /* A' or 'B' device indicator */
# define nB_DEVICE 0x0
/* Bit masks for USB_OTG_VBUS_IRQ */
# define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
# define nDRIVE_VBUS_ON 0x0
# define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
# define nDRIVE_VBUS_OFF 0x0
# define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
# define nCHRG_VBUS_START 0x0
# define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
# define nCHRG_VBUS_END 0x0
# define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
# define nDISCHRG_VBUS_START 0x0
# define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
# define nDISCHRG_VBUS_END 0x0
/* Bit masks for USB_OTG_VBUS_MASK */
# define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
# define nDRIVE_VBUS_ON_ENA 0x0
# define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
# define nDRIVE_VBUS_OFF_ENA 0x0
# define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
# define nCHRG_VBUS_START_ENA 0x0
# define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
# define nCHRG_VBUS_END_ENA 0x0
# define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
# define nDISCHRG_VBUS_START_ENA 0x0
# define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
# define nDISCHRG_VBUS_END_ENA 0x0
/* Bit masks for USB_CSR0 */
# define RXPKTRDY 0x1 /* data packet receive indicator */
# define nRXPKTRDY 0x0
# define TXPKTRDY 0x2 /* data packet in FIFO indicator */
# define nTXPKTRDY 0x0
# define STALL_SENT 0x4 /* STALL handshake sent */
# define nSTALL_SENT 0x0
# define DATAEND 0x8 /* Data end indicator */
# define nDATAEND 0x0
# define SETUPEND 0x10 /* Setup end */
# define nSETUPEND 0x0
# define SENDSTALL 0x20 /* Send STALL handshake */
# define nSENDSTALL 0x0
# define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
# define nSERVICED_RXPKTRDY 0x0
# define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
# define nSERVICED_SETUPEND 0x0
# define FLUSHFIFO 0x100 /* flush endpoint FIFO */
# define nFLUSHFIFO 0x0
# define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
# define nSTALL_RECEIVED_H 0x0
# define SETUPPKT_H 0x8 /* send Setup token host mode */
# define nSETUPPKT_H 0x0
# define ERROR_H 0x10 /* timeout error indicator host mode */
# define nERROR_H 0x0
# define REQPKT_H 0x20 /* Request an IN transaction host mode */
# define nREQPKT_H 0x0
# define STATUSPKT_H 0x40 /* Status stage transaction host mode */
# define nSTATUSPKT_H 0x0
# define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
# define nNAK_TIMEOUT_H 0x0
/* Bit masks for USB_COUNT0 */
# define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
/* Bit masks for USB_NAKLIMIT0 */
# define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
/* Bit masks for USB_TX_MAX_PACKET */
# define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
/* Bit masks for USB_RX_MAX_PACKET */
# define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
/* Bit masks for USB_TXCSR */
# define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
# define nTXPKTRDY_T 0x0
# define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
# define nFIFO_NOT_EMPTY_T 0x0
# define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
# define nUNDERRUN_T 0x0
# define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
# define nFLUSHFIFO_T 0x0
# define STALL_SEND_T 0x10 /* issue a Stall handshake */
# define nSTALL_SEND_T 0x0
# define STALL_SENT_T 0x20 /* Stall handshake transmitted */
# define nSTALL_SENT_T 0x0
# define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
# define nCLEAR_DATATOGGLE_T 0x0
# define INCOMPTX_T 0x80 /* indicates that a large packet is split */
# define nINCOMPTX_T 0x0
# define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
# define nDMAREQMODE_T 0x0
# define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
# define nFORCE_DATATOGGLE_T 0x0
# define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
# define nDMAREQ_ENA_T 0x0
# define ISO_T 0x4000 /* enable Isochronous transfers */
# define nISO_T 0x0
# define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
# define nAUTOSET_T 0x0
# define ERROR_TH 0x4 /* error condition host mode */
# define nERROR_TH 0x0
# define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
# define nSTALL_RECEIVED_TH 0x0
# define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
# define nNAK_TIMEOUT_TH 0x0
/* Bit masks for USB_TXCOUNT */
# define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
/* Bit masks for USB_RXCSR */
# define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
# define nRXPKTRDY_R 0x0
# define FIFO_FULL_R 0x2 /* FIFO not empty */
# define nFIFO_FULL_R 0x0
# define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
# define nOVERRUN_R 0x0
# define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
# define nDATAERROR_R 0x0
# define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
# define nFLUSHFIFO_R 0x0
# define STALL_SEND_R 0x20 /* issue a Stall handshake */
# define nSTALL_SEND_R 0x0
# define STALL_SENT_R 0x40 /* Stall handshake transmitted */
# define nSTALL_SENT_R 0x0
# define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
# define nCLEAR_DATATOGGLE_R 0x0
# define INCOMPRX_R 0x100 /* indicates that a large packet is split */
# define nINCOMPRX_R 0x0
# define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
# define nDMAREQMODE_R 0x0
# define DISNYET_R 0x1000 /* disable Nyet handshakes */
# define nDISNYET_R 0x0
# define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
# define nDMAREQ_ENA_R 0x0
# define ISO_R 0x4000 /* enable Isochronous transfers */
# define nISO_R 0x0
# define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
# define nAUTOCLEAR_R 0x0
# define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
# define nERROR_RH 0x0
# define REQPKT_RH 0x20 /* request an IN transaction host mode */
# define nREQPKT_RH 0x0
# define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
# define nSTALL_RECEIVED_RH 0x0
# define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
# define nINCOMPRX_RH 0x0
# define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
# define nDMAREQMODE_RH 0x0
# define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
# define nAUTOREQ_RH 0x0
/* Bit masks for USB_RXCOUNT */
# define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
/* Bit masks for USB_TXTYPE */
# define TARGET_EP_NO_T 0xf /* EP number */
# define PROTOCOL_T 0xc /* transfer type */
/* Bit masks for USB_TXINTERVAL */
# define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
/* Bit masks for USB_RXTYPE */
# define TARGET_EP_NO_R 0xf /* EP number */
# define PROTOCOL_R 0xc /* transfer type */
/* Bit masks for USB_RXINTERVAL */
# define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
/* Bit masks for USB_DMA_INTERRUPT */
# define DMA0_INT 0x1 /* DMA0 pending interrupt */
# define nDMA0_INT 0x0
# define DMA1_INT 0x2 /* DMA1 pending interrupt */
# define nDMA1_INT 0x0
# define DMA2_INT 0x4 /* DMA2 pending interrupt */
# define nDMA2_INT 0x0
# define DMA3_INT 0x8 /* DMA3 pending interrupt */
# define nDMA3_INT 0x0
# define DMA4_INT 0x10 /* DMA4 pending interrupt */
# define nDMA4_INT 0x0
# define DMA5_INT 0x20 /* DMA5 pending interrupt */
# define nDMA5_INT 0x0
# define DMA6_INT 0x40 /* DMA6 pending interrupt */
# define nDMA6_INT 0x0
# define DMA7_INT 0x80 /* DMA7 pending interrupt */
# define nDMA7_INT 0x0
/* Bit masks for USB_DMAxCONTROL */
# define DMA_ENA 0x1 /* DMA enable */
# define nDMA_ENA 0x0
# define DIRECTION 0x2 /* direction of DMA transfer */
# define nDIRECTION 0x0
# define MODE 0x4 /* DMA Bus error */
# define nMODE 0x0
# define INT_ENA 0x8 /* Interrupt enable */
# define nINT_ENA 0x0
# define EPNUM 0xf0 /* EP number */
# define BUSERROR 0x100 /* DMA Bus error */
# define nBUSERROR 0x0
/* Bit masks for USB_DMAxADDRHIGH */
# define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
/* Bit masks for USB_DMAxADDRLOW */
# define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
/* Bit masks for USB_DMAxCOUNTHIGH */
# define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
/* Bit masks for USB_DMAxCOUNTLOW */
# define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
# endif /* _DEF_BF527_H */
