p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/phy/Kconfig

515 lines
14 KiB
Plaintext
Raw Normal View History

drivers: phy: add generic PHY framework The PHY framework provides a set of APIs for the PHY drivers to create/destroy a PHY and APIs for the PHY users to obtain a reference to the PHY with or without using phandle. For dt-boot, the PHY drivers should also register *PHY provider* with the framework. PHY drivers should create the PHY by passing id and ops like init, exit, power_on and power_off. This framework is also pm runtime enabled. The documentation for the generic PHY framework is added in Documentation/phy.txt and the documentation for dt binding can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt Cc: Tomasz Figa <t.figa@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 14:23:25 +08:00
#
# PHY
#
menu "PHY Subsystem"
config GENERIC_PHY
phy-core: Don't allow building phy-core as a module include/phy/phy.h has stub code in there for when building without the phy-core enabled. This is useful for generic drivers such as ahci-platform, ehci-platoform and ohci-platform which have support for driving an optional phy passed to them through the devicetree. Since on some boards this phy functionality is not needed, being able to disable the phy subsystem without needing a lot of #ifdef magic in the driver using it is quite useful. However this breaks when the module using the phy subsystem is build-in and the phy-core is not, which leads to the build failing with missing symbol errors in the linking stage of the zImage. Which leads to gems such as this being added to the Kconfig for achi_platform: depends on GENERIC_PHY || !GENERIC_PHY Rather then duplicating this code in a lot of places using the phy-core, I believe it is better to simply not allow the phy-core to be built as a module. The phy core is quite small and has no external dependencies, so always building it in when enabling it should not be an issue. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-17 16:59:24 +08:00
bool "PHY Core"
drivers: phy: add generic PHY framework The PHY framework provides a set of APIs for the PHY drivers to create/destroy a PHY and APIs for the PHY users to obtain a reference to the PHY with or without using phandle. For dt-boot, the PHY drivers should also register *PHY provider* with the framework. PHY drivers should create the PHY by passing id and ops like init, exit, power_on and power_off. This framework is also pm runtime enabled. The documentation for the generic PHY framework is added in Documentation/phy.txt and the documentation for dt binding can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt Cc: Tomasz Figa <t.figa@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 14:23:25 +08:00
help
Generic PHY support.
This framework is designed to provide a generic interface for PHY
devices present in the kernel. This layer will have the generic
API by which phy drivers can create PHY using the phy framework and
phy users can obtain reference to the PHY. All the users of this
framework should select this config.
phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar Northstar is a family of SoCs used in home routers. They have USB 2.0 and 3.0 controllers with PHYs that need to be properly initialized. This driver provides PHY init support in a generic way and can be bound with an EHCI controller driver. There are (just a few) registers being defined in bcma header. It's because DMU/CRU registers will be also needed in other drivers. We will need them e.g. in PCIe controller/PHY driver and at some point probably in clock driver for BCM53573 chipset. By using include/linux/bcma/ we avoid code duplication. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-14 17:37:43 +08:00
config PHY_BCM_NS_USB2
tristate "Broadcom Northstar USB 2.0 PHY Driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on HAS_IOMEM && OF
select GENERIC_PHY
help
Enable this to support Broadcom USB 2.0 PHY connected to the USB
controller on Northstar family.
phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar Northstar is a family of SoCs used in home routers. They have USB 2.0 and 3.0 controllers with PHYs that need to be properly initialized. This driver provides PHY init support in a generic way and can be bound with XHCI controller driver. There aren't any public datasheets from Broadcom so we can't have nice defines for all used bits. It means we just follow Broadcom's initialization procedure using their magic values. We were quite lucky actually that Broadcom put some comments in their SDK reference code explaining what given writes are responsible for. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-08-12 06:28:03 +08:00
config PHY_BCM_NS_USB3
tristate "Broadcom Northstar USB 3.0 PHY Driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on HAS_IOMEM && OF
select GENERIC_PHY
help
Enable this to support Broadcom USB 3.0 PHY connected to the USB
controller on Northstar family.
phy: add the Berlin USB PHY driver Add the driver driving the Marvell Berlin USB PHY. This allows to initialize the PHY and to use it from the USB driver later. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-21 05:53:25 +08:00
config PHY_BERLIN_USB
tristate "Marvell Berlin USB PHY Driver"
depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
select GENERIC_PHY
help
Enable this to support the USB PHY on Marvell Berlin SoCs.
phy: add a driver for the Berlin SATA PHY The Berlin SoC has a two SATA ports. Add a PHY driver to handle them. The mode selection can let us think this PHY can be configured to fit other purposes. But there are reasons to think the SATA mode will be the only one usable: the PHY registers are only accessible indirectly through two registers in the SATA range, the PHY seems to be integrated and no information tells us the contrary. For these reasons, make the driver a SATA PHY driver. Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-07 18:16:07 +08:00
config PHY_BERLIN_SATA
tristate "Marvell Berlin SATA PHY driver"
depends on ARCH_BERLIN && HAS_IOMEM && OF
select GENERIC_PHY
help
Enable this to support the SATA PHY on Marvell Berlin SoCs.
phy: add support for USB cluster on the Armada 375 SoC The Armada 375 SoC comes with an USB2 host and device controller and an USB3 controller. The USB cluster control register allows to manage common features of both USB controllers. This commit adds a driver integrated in the generic PHY framework to control this USB cluster feature. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> [ kishon@ti.com : Made it to use the updated devm_phy_create API and soem cosmentic changes in Kconfig file.] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
2014-11-13 19:47:46 +08:00
config ARMADA375_USBCLUSTER_PHY
def_bool y
depends on MACH_ARMADA_375 || COMPILE_TEST
phy: Fix armada375 compile test build on UM The phy-armada375-usb2 driver uses IOMEM functions so COMPILE_TEST && OF build failed with: drivers/built-in.o: In function `armada375_usb_phy_probe': phy-armada375-usb2.c:(.text+0x121d): undefined reference to `devm_ioremap_resource' Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-02-29 13:56:30 +08:00
depends on OF && HAS_IOMEM
phy: add support for USB cluster on the Armada 375 SoC The Armada 375 SoC comes with an USB2 host and device controller and an USB3 controller. The USB cluster control register allows to manage common features of both USB controllers. This commit adds a driver integrated in the generic PHY framework to control this USB cluster feature. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> [ kishon@ti.com : Made it to use the updated devm_phy_create API and soem cosmentic changes in Kconfig file.] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
2014-11-13 19:47:46 +08:00
select GENERIC_PHY
phy: da8xx-usb: new driver for DA8xx SoC USB PHY This is a new phy driver for the SoC USB controllers on the TI DA8xx family of microcontrollers. The USB 1.1 PHY is just a simple on/off. The USB 2.0 PHY also allows overriding the VBUS and ID pins. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-05-10 07:40:00 +08:00
config PHY_DA8XX_USB
tristate "TI DA8xx USB PHY Driver"
depends on ARCH_DAVINCI_DA8XX
select GENERIC_PHY
select MFD_SYSCON
help
Enable this to support the USB PHY on DA8xx SoCs.
This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
phy: Add a driver for dm816x USB PHY Add a minimal driver for dm816x USB. This makes USB work on dm816x without any other changes needed as it can use the existing musb_dsps glue layer for the USB controller. Note that this phy is different from dm814x and am335x. Cc: Bin Liu <binmlist@gmail.com> Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-20 08:08:07 +08:00
config PHY_DM816X_USB
tristate "TI dm816x USB PHY driver"
depends on ARCH_OMAP2PLUS
phy: fix Kconfig dependencies DM816x PHY uses usb_phy_* methods and because of that, it must select USB_PHY, however, because the drivers in question (DM816x, TWL4030 and OMAP_USB2) sit outside of drivers/usb/ directory, meaning they can be built even if USB_SUPPORT=n. This patches fixes the dependencies by adding USB_SUPPORT as a dependency and making all drivers select USB_PHY (which cannot be selected through menuconfig). Note that this fixes some linking breakages when building with randconfig. Cc: Tony Lindgren <tony@atomide.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-29 00:13:15 +08:00
depends on USB_SUPPORT
phy: Add a driver for dm816x USB PHY Add a minimal driver for dm816x USB. This makes USB work on dm816x without any other changes needed as it can use the existing musb_dsps glue layer for the USB controller. Note that this phy is different from dm814x and am335x. Cc: Bin Liu <binmlist@gmail.com> Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-20 08:08:07 +08:00
select GENERIC_PHY
phy: fix Kconfig dependencies DM816x PHY uses usb_phy_* methods and because of that, it must select USB_PHY, however, because the drivers in question (DM816x, TWL4030 and OMAP_USB2) sit outside of drivers/usb/ directory, meaning they can be built even if USB_SUPPORT=n. This patches fixes the dependencies by adding USB_SUPPORT as a dependency and making all drivers select USB_PHY (which cannot be selected through menuconfig). Note that this fixes some linking breakages when building with randconfig. Cc: Tony Lindgren <tony@atomide.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-29 00:13:15 +08:00
select USB_PHY
phy: Add a driver for dm816x USB PHY Add a minimal driver for dm816x USB. This makes USB work on dm816x without any other changes needed as it can use the existing musb_dsps glue layer for the USB controller. Note that this phy is different from dm814x and am335x. Cc: Bin Liu <binmlist@gmail.com> Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-20 08:08:07 +08:00
help
Enable this for dm816x USB to work.
phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs Add a PHY provider driver for the Samsung S5P/Exynos SoC MIPI CSI-2 receiver and MIPI DSI transmitter DPHYs. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17 00:28:10 +08:00
config PHY_EXYNOS_MIPI_VIDEO
tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
phy: Select PHY_EXYNOS_MIPI_VIDEO by default for ARCH_EXYNOS Instead of requiring user to figure out when PHY_EXYNOS_MIPI_VIDEO needs to be selected select it by default for Exynos SoCs. Also enable it when COMPILE_TEST is selected. If required the MIPI CSIS/DPHY driver can be then disabled or compiled in as module. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-02-22 00:44:01 +08:00
depends on HAS_IOMEM
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select GENERIC_PHY
default y if ARCH_S5PV210 || ARCH_EXYNOS
phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs Add a PHY provider driver for the Samsung S5P/Exynos SoC MIPI CSI-2 receiver and MIPI DSI transmitter DPHYs. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17 00:28:10 +08:00
help
Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
and EXYNOS SoCs.
phy: add lpc18xx usb otg phy driver Add PHY driver for the internal USB OTG PHY found on NXP LPC18xx and LPC43xx devices. This driver takes care of enabling the PHY in CREG (syscon) and setting the required clock frequency. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-10 04:48:25 +08:00
config PHY_LPC18XX_USB_OTG
tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
depends on MFD_SYSCON
select GENERIC_PHY
help
Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
This driver is need for USB0 support on LPC18xx/43xx and takes
care of enabling and clock setup.
phy: add Marvell HSIC 28nm PHY Add PHY driver for the Marvell HSIC 28nm PHY. This PHY is found in PXA1928 SOC. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-30 00:38:43 +08:00
config PHY_PXA_28NM_HSIC
tristate "Marvell USB HSIC 28nm PHY Driver"
phy/pxa: add HAS_IOMEM dependency Fix this compile error: drivers/built-in.o: In function 'mv_usb2_phy_probe': phy-pxa-28nm-usb2.c:(.text+0x25ec): undefined reference to 'devm_ioremap_resource' drivers/built-in.o: In function 'mv_hsic_phy_probe': phy-pxa-28nm-hsic.c:(.text+0x3084): undefined reference to 'devm_ioremap_resource' Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-06-29 22:57:08 +08:00
depends on HAS_IOMEM
phy: add Marvell HSIC 28nm PHY Add PHY driver for the Marvell HSIC 28nm PHY. This PHY is found in PXA1928 SOC. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-30 00:38:43 +08:00
select GENERIC_PHY
help
Enable this to support Marvell USB HSIC PHY driver for Marvell
SoC. This driver will do the PHY initialization and shutdown.
The PHY driver will be used by Marvell ehci driver.
To compile this driver as a module, choose M here.
phy: Add Marvell USB 2.0 OTG 28nm PHY Add driver for USB 28nm PHY found in Marvell PXA1928 SOC. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-30 00:38:42 +08:00
config PHY_PXA_28NM_USB2
tristate "Marvell USB 2.0 28nm PHY Driver"
phy/pxa: add HAS_IOMEM dependency Fix this compile error: drivers/built-in.o: In function 'mv_usb2_phy_probe': phy-pxa-28nm-usb2.c:(.text+0x25ec): undefined reference to 'devm_ioremap_resource' drivers/built-in.o: In function 'mv_hsic_phy_probe': phy-pxa-28nm-hsic.c:(.text+0x3084): undefined reference to 'devm_ioremap_resource' Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-06-29 22:57:08 +08:00
depends on HAS_IOMEM
phy: Add Marvell USB 2.0 OTG 28nm PHY Add driver for USB 28nm PHY found in Marvell PXA1928 SOC. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-30 00:38:42 +08:00
select GENERIC_PHY
help
Enable this to support Marvell USB 2.0 PHY driver for Marvell
SoC. This driver will do the PHY initialization and shutdown.
The PHY driver will be used by Marvell udc/ehci/otg driver.
To compile this driver as a module, choose M here.
Phy: Add a PHY driver for Marvell MVEBU SATA PHY. Kirkwood and Dove can turn the SATA phy on and off. Add a PHY driver to control this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2013-12-18 04:21:50 +08:00
config PHY_MVEBU_SATA
def_bool y
phy: Remove ARCH_KIRKWOOD dependency mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. Depend on MACH_KIRKWOOD, which will be set when these SoCs are built as part of mach-mvebv. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-11 05:36:30 +08:00
depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
Phy: Add a PHY driver for Marvell MVEBU SATA PHY. Kirkwood and Dove can turn the SATA phy on and off. Add a PHY driver to control this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2013-12-18 04:21:50 +08:00
depends on OF
select GENERIC_PHY
phy: miphy28lp: Provide support for the MiPHY28lp Generic PHY The MiPHY28lp is a Generic PHY which can serve various SATA or PCIe or USB3 devices. Signed-off-by: alexandre torgue <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-04 18:51:19 +08:00
config PHY_MIPHY28LP
tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
depends on ARCH_STI
select GENERIC_PHY
help
Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
that is part of STMicroelectronics STiH407 SoC.
phy: Renesas R-Car Gen2 PHY driver This PHY, though formally being a part of Renesas USBHS controller, contains the UGCTRL2 register that controls multiplexing of the USB ports (Renesas calls them channels) to the different USB controllers: channel 0 can be connected to either PCI EHCI/OHCI or USBHS controllers, channel 2 can be connected to PCI EHCI/OHCI or xHCI controllers. This is a new driver for this USB PHY currently already supported under drivers/ usb/phy/. The reason for writing the new driver was the requirement that the multiplexing of USB channels to the controller be dynamic, depending on what USB drivers are loaded, rather than static as provided by the old driver. The infrastructure provided by drivers/phy/phy-core.c seems to fit that purpose ideally. The new driver only supports device tree probing for now. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-23 03:27:14 +08:00
config PHY_RCAR_GEN2
tristate "Renesas R-Car generation 2 USB PHY driver"
phy: rcar-gen3-usb2, rcar-gen2: Use ARCH_RENESAS Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. A now redundant dependency on OF is also dropped. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-03-07 09:14:24 +08:00
depends on ARCH_RENESAS
phy: Renesas R-Car Gen2 PHY driver This PHY, though formally being a part of Renesas USBHS controller, contains the UGCTRL2 register that controls multiplexing of the USB ports (Renesas calls them channels) to the different USB controllers: channel 0 can be connected to either PCI EHCI/OHCI or USBHS controllers, channel 2 can be connected to PCI EHCI/OHCI or xHCI controllers. This is a new driver for this USB PHY currently already supported under drivers/ usb/phy/. The reason for writing the new driver was the requirement that the multiplexing of USB channels to the controller be dynamic, depending on what USB drivers are loaded, rather than static as provided by the old driver. The infrastructure provided by drivers/phy/phy-core.c seems to fit that purpose ideally. The new driver only supports device tree probing for now. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-23 03:27:14 +08:00
depends on GENERIC_PHY
help
Support for USB PHY found on Renesas R-Car generation 2 SoCs.
phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver This patch adds support for R-Car generation 3 USB2 PHY driver. This SoC has 3 EHCI/OHCI channels, and the channel 0 is shared with the HSUSB (USB2.0 peripheral) device. And each channel has independent registers about the PHYs. So, the purpose of this driver is: 1) initializes some registers of SoC specific to use the {ehci,ohci}-platform driver. 2) detects id pin to select host or peripheral on the channel 0. For now, this driver only supports 1) above. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-11-30 09:44:30 +08:00
config PHY_RCAR_GEN3_USB2
tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
phy: rcar-gen3-usb2, rcar-gen2: Use ARCH_RENESAS Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. A now redundant dependency on OF is also dropped. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-03-07 09:14:24 +08:00
depends on ARCH_RENESAS
phy: rcar-gen3-usb2: add extcon support This patch adds extcon support for otg related channel. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-29 16:52:25 +08:00
depends on EXTCON
phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver This patch adds support for R-Car generation 3 USB2 PHY driver. This SoC has 3 EHCI/OHCI channels, and the channel 0 is shared with the HSUSB (USB2.0 peripheral) device. And each channel has independent registers about the PHYs. So, the purpose of this driver is: 1) initializes some registers of SoC specific to use the {ehci,ohci}-platform driver. 2) detects id pin to select host or peripheral on the channel 0. For now, this driver only supports 1) above. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-11-30 09:44:30 +08:00
select GENERIC_PHY
help
Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
phy: rename struct omap_control_usb to struct omap_control_phy Rename struct omap_control_usb to struct omap_control_phy since it can be used to control PHY of USB, SATA and PCIE. Also move the driver and include files under *phy* and made the corresponding changes in the users of phy-omap-control. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com>
2014-03-06 22:38:37 +08:00
config OMAP_CONTROL_PHY
tristate "OMAP CONTROL PHY Driver"
phy: restore OMAP_CONTROL_PHY dependencies When OMAP_CONTROL_USB was renamed to OMAP_CONTROL_PHY (commit 14da699b), its dependencies were lost in the process. Nothing in the commit message indicates that this removal was intentional, so I think it was by accident and the dependencies should be restored. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Roger Quadros <rogerq@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-19 11:21:42 +08:00
depends on ARCH_OMAP2PLUS || COMPILE_TEST
phy: rename struct omap_control_usb to struct omap_control_phy Rename struct omap_control_usb to struct omap_control_phy since it can be used to control PHY of USB, SATA and PCIE. Also move the driver and include files under *phy* and made the corresponding changes in the users of phy-omap-control. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com>
2014-03-06 22:38:37 +08:00
help
Enable this to add support for the PHY part present in the control
module. This driver has API to power on the USB2 PHY and to write to
the mailbox. The mailbox is present only in omap4 and the register to
power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
additional register to power on USB3 PHY/SATA PHY/PCIE PHY
(PIPE3 PHY).
usb: phy: omap-usb2: use the new generic PHY framework Used the generic PHY framework API to create the PHY. Now the power off and power on are done in omap_usb_power_off and omap_usb_power_on respectively. The omap-usb2 driver is also moved to driver/phy. However using the old USB PHY library cannot be completely removed because OTG is intertwined with PHY and moving to the new framework will break OTG. Once we have a separate OTG state machine, we can get rid of the USB PHY library. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 14:23:26 +08:00
config OMAP_USB2
tristate "OMAP USB2 PHY Driver"
depends on ARCH_OMAP2PLUS
phy: fix Kconfig dependencies DM816x PHY uses usb_phy_* methods and because of that, it must select USB_PHY, however, because the drivers in question (DM816x, TWL4030 and OMAP_USB2) sit outside of drivers/usb/ directory, meaning they can be built even if USB_SUPPORT=n. This patches fixes the dependencies by adding USB_SUPPORT as a dependency and making all drivers select USB_PHY (which cannot be selected through menuconfig). Note that this fixes some linking breakages when building with randconfig. Cc: Tony Lindgren <tony@atomide.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-29 00:13:15 +08:00
depends on USB_SUPPORT
usb: phy: omap-usb2: use the new generic PHY framework Used the generic PHY framework API to create the PHY. Now the power off and power on are done in omap_usb_power_off and omap_usb_power_on respectively. The omap-usb2 driver is also moved to driver/phy. However using the old USB PHY library cannot be completely removed because OTG is intertwined with PHY and moving to the new framework will break OTG. Once we have a separate OTG state machine, we can get rid of the USB PHY library. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 14:23:26 +08:00
select GENERIC_PHY
phy: fix Kconfig dependencies DM816x PHY uses usb_phy_* methods and because of that, it must select USB_PHY, however, because the drivers in question (DM816x, TWL4030 and OMAP_USB2) sit outside of drivers/usb/ directory, meaning they can be built even if USB_SUPPORT=n. This patches fixes the dependencies by adding USB_SUPPORT as a dependency and making all drivers select USB_PHY (which cannot be selected through menuconfig). Note that this fixes some linking breakages when building with randconfig. Cc: Tony Lindgren <tony@atomide.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-29 00:13:15 +08:00
select USB_PHY
phy: rename struct omap_control_usb to struct omap_control_phy Rename struct omap_control_usb to struct omap_control_phy since it can be used to control PHY of USB, SATA and PCIE. Also move the driver and include files under *phy* and made the corresponding changes in the users of phy-omap-control. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com>
2014-03-06 22:38:37 +08:00
select OMAP_CONTROL_PHY
phy: omap: Depend on OMAP_OCP2SCP bus driver The OMAP_USB2 and OMAP_PIPE3 PHY devices will not be detected if the OMAP_OCP2SCP bus driver is not present. Make them depend on it. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 22:38:45 +08:00
depends on OMAP_OCP2SCP
usb: phy: omap-usb2: use the new generic PHY framework Used the generic PHY framework API to create the PHY. Now the power off and power on are done in omap_usb_power_off and omap_usb_power_on respectively. The omap-usb2 driver is also moved to driver/phy. However using the old USB PHY library cannot be completely removed because OTG is intertwined with PHY and moving to the new framework will break OTG. Once we have a separate OTG state machine, we can get rid of the USB PHY library. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 14:23:26 +08:00
help
Enable this to support the transceiver that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
The USB OTG controller communicates with the comparator using this
driver.
drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework Adapted omap-usb3 PHY driver to Generic PHY Framework and moved phy-omap-usb3 driver in drivers/usb/phy to drivers/phy and also renamed the file to phy-ti-pipe3 since this same driver will be used for SATA PHY and PCIE PHY. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-03 19:38:12 +08:00
config TI_PIPE3
tristate "TI PIPE3 PHY Driver"
depends on ARCH_OMAP2PLUS || COMPILE_TEST
select GENERIC_PHY
phy: rename struct omap_control_usb to struct omap_control_phy Rename struct omap_control_usb to struct omap_control_phy since it can be used to control PHY of USB, SATA and PCIE. Also move the driver and include files under *phy* and made the corresponding changes in the users of phy-omap-control. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com>
2014-03-06 22:38:37 +08:00
select OMAP_CONTROL_PHY
phy: omap: Depend on OMAP_OCP2SCP bus driver The OMAP_USB2 and OMAP_PIPE3 PHY devices will not be detected if the OMAP_OCP2SCP bus driver is not present. Make them depend on it. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 22:38:45 +08:00
depends on OMAP_OCP2SCP
drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework Adapted omap-usb3 PHY driver to Generic PHY Framework and moved phy-omap-usb3 driver in drivers/usb/phy to drivers/phy and also renamed the file to phy-ti-pipe3 since this same driver will be used for SATA PHY and PCIE PHY. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-03 19:38:12 +08:00
help
Enable this to support the PIPE3 PHY that is part of TI SOCs. This
driver takes care of all the PHY functionality apart from comparator.
This driver interacts with the "OMAP Control PHY Driver" to power
on/off the PHY.
usb: phy: twl4030: use the new generic PHY framework Used the generic PHY framework API to create the PHY. For powering on and powering off the PHY, power_on and power_off ops are used. Once the MUSB OMAP glue is adapted to the new framework, the suspend and resume ops of usb phy library will be removed. Also twl4030-usb driver is moved to drivers/phy/. However using the old usb phy library cannot be completely removed because otg is intertwined with phy and moving to the new framework completely will break otg. Once we have a separate otg state machine, we can get rid of the usb phy library. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 14:23:27 +08:00
config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
phy: fix Kconfig dependencies DM816x PHY uses usb_phy_* methods and because of that, it must select USB_PHY, however, because the drivers in question (DM816x, TWL4030 and OMAP_USB2) sit outside of drivers/usb/ directory, meaning they can be built even if USB_SUPPORT=n. This patches fixes the dependencies by adding USB_SUPPORT as a dependency and making all drivers select USB_PHY (which cannot be selected through menuconfig). Note that this fixes some linking breakages when building with randconfig. Cc: Tony Lindgren <tony@atomide.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-29 00:13:15 +08:00
depends on USB_SUPPORT
usb: gadget: move gadget API functions to udc-core instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-31 18:07:47 +08:00
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
usb: phy: twl4030: use the new generic PHY framework Used the generic PHY framework API to create the PHY. For powering on and powering off the PHY, power_on and power_off ops are used. Once the MUSB OMAP glue is adapted to the new framework, the suspend and resume ops of usb phy library will be removed. Also twl4030-usb driver is moved to drivers/phy/. However using the old usb phy library cannot be completely removed because otg is intertwined with phy and moving to the new framework completely will break otg. Once we have a separate otg state machine, we can get rid of the usb phy library. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 14:23:27 +08:00
select GENERIC_PHY
phy: fix Kconfig dependencies DM816x PHY uses usb_phy_* methods and because of that, it must select USB_PHY, however, because the drivers in question (DM816x, TWL4030 and OMAP_USB2) sit outside of drivers/usb/ directory, meaning they can be built even if USB_SUPPORT=n. This patches fixes the dependencies by adding USB_SUPPORT as a dependency and making all drivers select USB_PHY (which cannot be selected through menuconfig). Note that this fixes some linking breakages when building with randconfig. Cc: Tony Lindgren <tony@atomide.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-29 00:13:15 +08:00
select USB_PHY
usb: phy: twl4030: use the new generic PHY framework Used the generic PHY framework API to create the PHY. For powering on and powering off the PHY, power_on and power_off ops are used. Once the MUSB OMAP glue is adapted to the new framework, the suspend and resume ops of usb phy library will be removed. Also twl4030-usb driver is moved to drivers/phy/. However using the old usb phy library cannot be completely removed because otg is intertwined with phy and moving to the new framework completely will break otg. Once we have a separate otg state machine, we can get rid of the usb phy library. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 14:23:27 +08:00
help
Enable this to support the USB OTG transceiver on TWL4030
family chips (including the TWL5030 and TPS659x0 devices).
This transceiver supports high and full speed devices plus,
in host mode, low speed.
phy: Add driver for Exynos DP PHY Add a PHY provider driver for the Samsung Exynos SoC Display Port PHY. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17 00:28:14 +08:00
config PHY_EXYNOS_DP_VIDEO
tristate "EXYNOS SoC series Display Port PHY driver"
depends on OF
phy: Select PHY_EXYNOS_DP_VIDEO by default for ARCH_EXYNOS Instead of requiring user to figure out when PHY_EXYNOS_DP_VIDEO needs to be selected select it by default for Exynos SoCs. Also enable it when COMPILE_TEST is selected. If required the display port PHY driver can be then disabled or compiled in as module. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-02-22 00:44:02 +08:00
depends on ARCH_EXYNOS || COMPILE_TEST
default ARCH_EXYNOS
phy: Add driver for Exynos DP PHY Add a PHY provider driver for the Samsung Exynos SoC Display Port PHY. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17 00:28:14 +08:00
select GENERIC_PHY
help
Support for Display Port PHY found on Samsung EXYNOS SoCs.
phy: add Broadcom Kona USB2 PHY driver Add a driver for the internal Broadcom Kona USB 2.0 PHY found on the BCM281xx family of SoCs. Signed-off-by: Matt Porter <mporter@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-19 22:23:09 +08:00
config BCM_KONA_USB2_PHY
tristate "Broadcom Kona USB2 PHY Driver"
phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/phy/phy-bcm-kona-usb2.c:114: undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-17 16:59:21 +08:00
depends on HAS_IOMEM
phy: kona2: use 'select GENERIC_PHY' in Kconfig All other phy drivers use 'select', while this one is the only one to use 'depends on'. This is not a bug, just slightly inconsistent, so let's change it to do things the same way as everyone else. We may also want to turn GENERIC_PHY into a silent option that only ever gets turned on if another driver needs it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Matt Porter <mporter@linaro.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-08 22:46:53 +08:00
select GENERIC_PHY
phy: add Broadcom Kona USB2 PHY driver Add a driver for the internal Broadcom Kona USB 2.0 PHY found on the BCM281xx family of SoCs. Signed-off-by: Matt Porter <mporter@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-19 22:23:09 +08:00
help
Enable this to support the Broadcom Kona USB 2.0 PHY.
PHY: Exynos: Add Exynos5250 SATA PHY driver This patch adds the SATA PHY driver for Exynos5250.This driver uses the generic PHY framework to deal with SATA PHY.Exynos5250 SATA PHY comprises of CMU and TRSV blocks which are of I2C register Map.So this driver configures the CMU and TRSV block of exynos5250 SATA PHY using i2c. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Signed-off-by: Girish K S <ks.giri@samsung.com> Signed-off-by: Vasanth Ananthan <vasanth.a@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-03 13:22:39 +08:00
config PHY_EXYNOS5250_SATA
tristate "Exynos5250 Sata SerDes/PHY driver"
depends on SOC_EXYNOS5250
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
select I2C
select I2C_S3C2410
select MFD_SYSCON
help
Enable this to support SATA SerDes/Phy found on Samsung's
Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
port to accept one SATA device.
phy: add hix5hd2-sata-phy driver Add hix5hd2-sata-phy driver on Hisilicon hix5hd2 soc. Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-03 22:28:38 +08:00
config PHY_HIX5HD2_SATA
tristate "HIX5HD2 SATA PHY Driver"
depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
select GENERIC_PHY
select MFD_SYSCON
help
Support for SATA PHY on Hisilicon hix5hd2 Soc.
phy: add usb3.0 phy driver for mt65xx SoCs support usb3.0 phy of mt65xx SoCs Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-09-29 11:01:36 +08:00
config PHY_MT65XX_USB3
tristate "Mediatek USB3.0 PHY Driver"
depends on ARCH_MEDIATEK && OF
select GENERIC_PHY
help
phy: phy-mt65xx-usb3: add support for mt2701 platform Add a new OF device ID for mt2701 Some register settings to avoid RX sensitivity level degradation which may arise on mt8173 platform are separated from other platforms. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-20 08:14:02 +08:00
Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
it supports multiple usb2.0 and usb3.0 ports.
phy: add usb3.0 phy driver for mt65xx SoCs support usb3.0 phy of mt65xx SoCs Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-09-29 11:01:36 +08:00
phy: add phy-hi6220-usb Support hi6220 use phy for HiKey board Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-11-23 11:46:27 +08:00
config PHY_HI6220_USB
tristate "hi6220 USB PHY support"
phy: Restrict phy-hi6220-usb to HiSilicon arm64 The HiSilicon Hi6220 USB PHY is available in HiSilicon Hi6220 SoCs only. Restrict it to HiSilicon arm64, unless compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-01-15 21:40:24 +08:00
depends on (ARCH_HISI && ARM64) || COMPILE_TEST
phy: add phy-hi6220-usb Support hi6220 use phy for HiKey board Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-11-23 11:46:27 +08:00
select GENERIC_PHY
select MFD_SYSCON
help
Enable this to support the HISILICON HI6220 USB PHY.
To compile this driver as a module, choose M here.
PHY: sunxi: Add driver for sunxi usb phy The Allwinner A1x / A2x SoCs have 2 or 3 usb phys which are all accessed through a single set of registers. Besides this there are also some other phy related bits which need poking, which are per phy, but shared between the ohci and ehci controllers, so these are also controlled from this new phy driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-02 01:09:26 +08:00
config PHY_SUN4I_USB
tristate "Allwinner sunxi SoC USB PHY driver"
depends on ARCH_SUNXI && HAS_IOMEM && OF
phy: sun4i: depend on RESET_CONTROLLER The driver depend on the reset framework in a mandatory way. Make sure reset_control_get is defined by adding this dependency in Kconfig Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10 14:24:59 +08:00
depends on RESET_CONTROLLER
phy-sun4i-usb: Add extcon support for the otg phy (phy0) The sunxi musb glue needs to know if a host or normal usb cable is plugged in, add extcon support so that the musb glue can monitor the host status. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-06-13 20:37:46 +08:00
depends on EXTCON
phy-sun4i-usb: Add support for monitoring vbus via a power-supply On some boards there is no vbus_det gpio pin, instead vbus-detection for otg can be done via the pmic. This commit adds support for monitoring vbus_det via the power_supply exported by the pmic, enabling support for otg on these boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-06-13 20:37:51 +08:00
depends on POWER_SUPPLY
usb: phy: add USB_SUPPORT dependency The driver now calls of_usb_get_dr_mode_by_phy, which is part of the USB core layer, and it fails to build when that is not provided: drivers/phy/phy-sun4i-usb.o: In function `sun4i_usb_phy_probe': phy-sun4i-usb.c:(.text.sun4i_usb_phy_probe+0x140): undefined reference to `of_usb_get_dr_mode_by_phy' We already have a couple of other PHY drivers with a dependency on USB_SUPPORT, so that seems to be the easiest fix here. An alternative would be to adjust the #ifdef in include/linux/usb/of.h to also check for CONFIG_USB_SUPPORT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Fixes: b33ecca87df9 ("phy-sun4i-usb: Add support for peripheral-only mode") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-06 20:54:46 +08:00
depends on USB_SUPPORT
PHY: sunxi: Add driver for sunxi usb phy The Allwinner A1x / A2x SoCs have 2 or 3 usb phys which are all accessed through a single set of registers. Besides this there are also some other phy related bits which need poking, which are per phy, but shared between the ohci and ehci controllers, so these are also controlled from this new phy driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-02 01:09:26 +08:00
select GENERIC_PHY
usb: phy: add USB_SUPPORT dependency The driver now calls of_usb_get_dr_mode_by_phy, which is part of the USB core layer, and it fails to build when that is not provided: drivers/phy/phy-sun4i-usb.o: In function `sun4i_usb_phy_probe': phy-sun4i-usb.c:(.text.sun4i_usb_phy_probe+0x140): undefined reference to `of_usb_get_dr_mode_by_phy' We already have a couple of other PHY drivers with a dependency on USB_SUPPORT, so that seems to be the easiest fix here. An alternative would be to adjust the #ifdef in include/linux/usb/of.h to also check for CONFIG_USB_SUPPORT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Fixes: b33ecca87df9 ("phy-sun4i-usb: Add support for peripheral-only mode") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-06 20:54:46 +08:00
select USB_COMMON
PHY: sunxi: Add driver for sunxi usb phy The Allwinner A1x / A2x SoCs have 2 or 3 usb phys which are all accessed through a single set of registers. Besides this there are also some other phy related bits which need poking, which are per phy, but shared between the ohci and ehci controllers, so these are also controlled from this new phy driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-02 01:09:26 +08:00
help
Enable this to support the transceiver that is part of Allwinner
sunxi SoCs.
This driver controls the entire USB PHY block, both the USB OTG
parts, as well as the 2 regular USB 2 host PHYs.
phy: Add driver to support individual USB PHYs on sun9i Unlike previous Allwinner SoCs, there is no central PHY control block on the A80. Also, OTG support is completely split off into a different controller. This adds a new driver to support the regular USB PHYs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-14 11:57:16 +08:00
config PHY_SUN9I_USB
tristate "Allwinner sun9i SoC USB PHY driver"
depends on ARCH_SUNXI && HAS_IOMEM && OF
depends on RESET_CONTROLLER
usb: common: rework CONFIG_USB_COMMON logic The phy-am335x driver selects 'USB_COMMON', but all other drivers use 'depends on' for that symbol, and it depends on USB || USB_GADGET itself, which causes a Kconfig warning: warning: (AM335X_PHY_USB) selects USB_COMMON which has unmet direct dependencies (USB_SUPPORT && (USB || USB_GADGET)) As suggested by Felipe Balbi, this turns the logic around, and makes 'USB_COMMON' selected by everything else that needs it, so we can remove the dependencies. Fixes: 59f042f644c5 ("usb: phy: phy-am335x: bypass first VBUS sensing for host-only mode") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felipe Balbi <balbi@kernel.org> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-24 00:45:08 +08:00
depends on USB_SUPPORT
select USB_COMMON
phy: Add driver to support individual USB PHYs on sun9i Unlike previous Allwinner SoCs, there is no central PHY control block on the A80. Also, OTG support is completely split off into a different controller. This adds a new driver to support the regular USB PHYs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-14 11:57:16 +08:00
select GENERIC_PHY
help
Enable this to support the transceiver that is part of Allwinner
sun9i SoCs.
This driver controls each individual USB 2 host PHY.
phy: Add new Exynos USB 2.0 PHY driver Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic PHY framework. The driver includes support for the Exynos 4x10 and 4x12 SoC families. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 19:16:48 +08:00
config PHY_SAMSUNG_USB2
tristate "Samsung USB 2.0 PHY driver"
HID: sensor-hub: introduce Kconfig dependency on IOMEM When NO_IOMEM is enabled (e.g. score architecture), some drivers which need HAS_IOMEM need notice about it, or it will report related warning: warning: (GPIO_SCH && GPIO_ICH && GPIO_VX855 && GPIO_RDC321X && IE6XX_WDT && RADIO_WL1273 && HID_SENSOR_HUB && MFD_NVEC) selects MFD_CORE which has unmet direct dependencies (HAS_IOMEM) Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-10 20:04:58 +08:00
depends on HAS_IOMEM
phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and USB gadget controller supported by the DWC2 gadget driver, make it depend on them and default to ARCH_EXYNOS as they are meant for Exynos platforms. Also, make the sub-drivers silent options enabling them based on the SoC platforms that they are meant to work with. This will make life easier for end users who do not have any way knowing the dependencies. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 18:08:41 +08:00
depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
phy: Add new Exynos USB 2.0 PHY driver Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic PHY framework. The driver includes support for the Exynos 4x10 and 4x12 SoC families. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 19:16:48 +08:00
select GENERIC_PHY
select MFD_SYSCON
phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and USB gadget controller supported by the DWC2 gadget driver, make it depend on them and default to ARCH_EXYNOS as they are meant for Exynos platforms. Also, make the sub-drivers silent options enabling them based on the SoC platforms that they are meant to work with. This will make life easier for end users who do not have any way knowing the dependencies. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 18:08:41 +08:00
default ARCH_EXYNOS
phy: Add new Exynos USB 2.0 PHY driver Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic PHY framework. The driver includes support for the Exynos 4x10 and 4x12 SoC families. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 19:16:48 +08:00
help
Enable this to support the Samsung USB 2.0 PHY driver for Samsung
phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and USB gadget controller supported by the DWC2 gadget driver, make it depend on them and default to ARCH_EXYNOS as they are meant for Exynos platforms. Also, make the sub-drivers silent options enabling them based on the SoC platforms that they are meant to work with. This will make life easier for end users who do not have any way knowing the dependencies. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 18:08:41 +08:00
SoCs. This driver provides the interface for USB 2.0 PHY. Support
for particular PHYs will be enabled based on the SoC type in addition
to this driver.
phy: Add new Exynos USB 2.0 PHY driver Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic PHY framework. The driver includes support for the Exynos 4x10 and 4x12 SoC families. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 19:16:48 +08:00
phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver Add support for the Samsung's S5PV210 SoC to the Exynos USB 2.0 PHY driver. Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> [k.debski@samsung.com: cleanup and commit description] [k.debski@samsung.com: make changes accordingly to the mailing list comments] Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-20 21:24:12 +08:00
config PHY_S5PV210_USB2
bool "Support for S5PV210"
depends on PHY_SAMSUNG_USB2
depends on ARCH_S5PV210
help
Enable USB PHY support for S5PV210. This option requires that Samsung
USB 2.0 PHY driver is enabled and means that support for this
particular SoC is compiled in the driver. In case of S5PV210 two phys
are available - device and host.
phy: Add new Exynos USB 2.0 PHY driver Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic PHY framework. The driver includes support for the Exynos 4x10 and 4x12 SoC families. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 19:16:48 +08:00
config PHY_EXYNOS4210_USB2
phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and USB gadget controller supported by the DWC2 gadget driver, make it depend on them and default to ARCH_EXYNOS as they are meant for Exynos platforms. Also, make the sub-drivers silent options enabling them based on the SoC platforms that they are meant to work with. This will make life easier for end users who do not have any way knowing the dependencies. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 18:08:41 +08:00
bool
phy: Add new Exynos USB 2.0 PHY driver Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic PHY framework. The driver includes support for the Exynos 4x10 and 4x12 SoC families. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 19:16:48 +08:00
depends on PHY_SAMSUNG_USB2
phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and USB gadget controller supported by the DWC2 gadget driver, make it depend on them and default to ARCH_EXYNOS as they are meant for Exynos platforms. Also, make the sub-drivers silent options enabling them based on the SoC platforms that they are meant to work with. This will make life easier for end users who do not have any way knowing the dependencies. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 18:08:41 +08:00
default CPU_EXYNOS4210
phy: Add new Exynos USB 2.0 PHY driver Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic PHY framework. The driver includes support for the Exynos 4x10 and 4x12 SoC families. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 19:16:48 +08:00
config PHY_EXYNOS4X12_USB2
phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and USB gadget controller supported by the DWC2 gadget driver, make it depend on them and default to ARCH_EXYNOS as they are meant for Exynos platforms. Also, make the sub-drivers silent options enabling them based on the SoC platforms that they are meant to work with. This will make life easier for end users who do not have any way knowing the dependencies. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 18:08:41 +08:00
bool
phy: Add new Exynos USB 2.0 PHY driver Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic PHY framework. The driver includes support for the Exynos 4x10 and 4x12 SoC families. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 19:16:48 +08:00
depends on PHY_SAMSUNG_USB2
phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and USB gadget controller supported by the DWC2 gadget driver, make it depend on them and default to ARCH_EXYNOS as they are meant for Exynos platforms. Also, make the sub-drivers silent options enabling them based on the SoC platforms that they are meant to work with. This will make life easier for end users who do not have any way knowing the dependencies. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 18:08:41 +08:00
default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
phy: Add Exynos 5250 support to the Exynos USB 2.0 PHY driver Add support for Exynos 5250. This driver is to replace the old USB 2.0 PHY driver. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 19:16:49 +08:00
config PHY_EXYNOS5250_USB2
phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and USB gadget controller supported by the DWC2 gadget driver, make it depend on them and default to ARCH_EXYNOS as they are meant for Exynos platforms. Also, make the sub-drivers silent options enabling them based on the SoC platforms that they are meant to work with. This will make life easier for end users who do not have any way knowing the dependencies. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 18:08:41 +08:00
bool
phy: Add Exynos 5250 support to the Exynos USB 2.0 PHY driver Add support for Exynos 5250. This driver is to replace the old USB 2.0 PHY driver. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 19:16:49 +08:00
depends on PHY_SAMSUNG_USB2
phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and USB gadget controller supported by the DWC2 gadget driver, make it depend on them and default to ARCH_EXYNOS as they are meant for Exynos platforms. Also, make the sub-drivers silent options enabling them based on the SoC platforms that they are meant to work with. This will make life easier for end users who do not have any way knowing the dependencies. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 18:08:41 +08:00
default SOC_EXYNOS5250 || SOC_EXYNOS5420
phy: Add Exynos 5250 support to the Exynos USB 2.0 PHY driver Add support for Exynos 5250. This driver is to replace the old USB 2.0 PHY driver. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06 19:16:49 +08:00
phy: Add new Exynos5 USB 3.0 PHY driver Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs. The new driver uses the generic PHY framework and will interact with DWC3 controller present on Exynos5 series of SoCs. Also, created a new header file in linux/mfd/syscon/ for Exynos5 SoCs and put the required PMU offset definitions for the basic available PHYs. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-13 18:00:16 +08:00
config PHY_EXYNOS5_USBDRD
tristate "Exynos5 SoC series USB DRD PHY driver"
phy: exynos7-usbdrd: Update dependency for ARCH_EXYNOS This PHY controller is also present on Exynos7 platform in arch-exynos family. So PHY_EXYNOS5_USBDRD should now depend on ARCH_EXYNOS. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-21 21:35:50 +08:00
depends on ARCH_EXYNOS && OF
phy: Add new Exynos5 USB 3.0 PHY driver Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs. The new driver uses the generic PHY framework and will interact with DWC3 controller present on Exynos5 series of SoCs. Also, created a new header file in linux/mfd/syscon/ for Exynos5 SoCs and put the required PMU offset definitions for the basic available PHYs. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-13 18:00:16 +08:00
depends on HAS_IOMEM
phy: Kconfig: Update config for Exynos USB DRD USB DWC3 driver on Exynos platform does not work without its corresponding phy driver. Hence make the PHY driver depend on Exynos DWC3 driver and default it to yes to make things easier for the end user. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 18:08:42 +08:00
depends on USB_DWC3_EXYNOS
phy: Add new Exynos5 USB 3.0 PHY driver Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs. The new driver uses the generic PHY framework and will interact with DWC3 controller present on Exynos5 series of SoCs. Also, created a new header file in linux/mfd/syscon/ for Exynos5 SoCs and put the required PMU offset definitions for the basic available PHYs. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-13 18:00:16 +08:00
select GENERIC_PHY
select MFD_SYSCON
phy: Kconfig: Update config for Exynos USB DRD USB DWC3 driver on Exynos platform does not work without its corresponding phy driver. Hence make the PHY driver depend on Exynos DWC3 driver and default it to yes to make things easier for the end user. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 18:08:42 +08:00
default y
phy: Add new Exynos5 USB 3.0 PHY driver Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs. The new driver uses the generic PHY framework and will interact with DWC3 controller present on Exynos5 series of SoCs. Also, created a new header file in linux/mfd/syscon/ for Exynos5 SoCs and put the required PMU offset definitions for the basic available PHYs. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-13 18:00:16 +08:00
help
Enable USB DRD PHY support for Exynos 5 SoC series.
This driver provides PHY interface for USB 3.0 DRD controller
present on Exynos5 SoC series.
phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Add support for Generic PHY framework about Exynos SoCs. Current Exynos PCIe driver doesn't use the PHY framework, which makes it difficult to upstream the other Exynos variants because of different PHY registers. Move the codes relevant to PHY from Exnyos PCIe driver to PHY Exynos PCIe driver. [bhelgaas: depend on "OF && (ARCH_EXYNOS || COMPILE_TEST)", update copyright year, both per Vivek] Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Jingoo Han <jingoohan1@gmail.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-13 16:26:11 +08:00
config PHY_EXYNOS_PCIE
bool "Exynos PCIe PHY driver"
depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
select GENERIC_PHY
help
Enable PCIe PHY support for Exynos SoC series.
This driver provides PHY interface for Exynos PCIe controller.
PHY: Add driver for Pistachio USB2.0 PHY Add a driver for the USB2.0 PHY found on the IMG Pistachio SoC. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hartley <james.hartley@imgtec.com> Cc: Damien Horsley <Damien.Horsley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/9728/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08 06:04:17 +08:00
config PHY_PISTACHIO_USB
tristate "IMG Pistachio USB2.0 PHY driver"
depends on MACH_PISTACHIO
select GENERIC_PHY
help
Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
phy: qcom: Add driver for QCOM APQ8064 SATA PHY Add a PHY driver for uses with AHCI based SATA controller driver on the APQ8064 family of SoCs. This patch is a forward port from Qualcomm's v3.4 andriod kernel. Tested on IFC6410 board. CC: Sujit Reddy Thumma <sthumma@codeaurora.org> Tested-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-14 19:17:59 +08:00
config PHY_QCOM_APQ8064_SATA
tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
depends on ARCH_QCOM
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
phy: qcom: Add driver for QCOM IPQ806x SATA PHY Add a PHY driver for uses with AHCI based SATA controller driver on the IPQ806x family of SoCs. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-17 00:10:08 +08:00
config PHY_QCOM_IPQ806X_SATA
tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
depends on ARCH_QCOM
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
phy: add a driver for the Rockchip SoC internal USB2.0 PHY This patch to add a generic PHY driver for ROCKCHIP usb PHYs, currently this driver can support RK3288. The RK3288 SoC have three independent USB PHY IPs which are all configured through a set of registers located in the GRF (general register files) module. Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-12-12 23:07:46 +08:00
config PHY_ROCKCHIP_USB
tristate "Rockchip USB2 PHY Driver"
depends on ARCH_ROCKCHIP && OF
select GENERIC_PHY
help
Enable this to support the Rockchip USB 2.0 PHY.
phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy The newer SoCs (rk3366, rk3399) take a different usb-phy IP block than rk3288 and before, and most of phy-related registers are also different from the past, so a new phy driver is required necessarily. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Suggested-by: Heiko Stuebner <heiko@sntech.de> Suggested-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-22 15:00:44 +08:00
config PHY_ROCKCHIP_INNO_USB2
tristate "Rockchip INNO USB2PHY Driver"
depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
phy: rockchip-inno-usb2: add COMMON_CLK dependency On kernel builds without COMMON_CLK, the newly added rockchip-inno-usb2 driver fails to build: drivers/phy/phy-rockchip-inno-usb2.c:124:16: error: field 'clk480m_hw' has incomplete type struct clk_hw clk480m_hw; In file included from include/linux/clk.h:16:0 from drivers/phy/phy-rockchip-inno-usb2.c:17: include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] const typeof( ((type *)0)->member ) *__mptr = (ptr); \ ... ... Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
2016-08-16 14:13:42 +08:00
depends on COMMON_CLK
phy: fix rockchip-inno-usb2 build errors Fix build errors in phy-rockchip-inno-usb2.c. The driver uses extcon interfaces so it should depend on EXTCON. Fixes these build errors: drivers/built-in.o: In function `rockchip_usb2phy_otg_sm_work': phy-rockchip-inno-usb2.c:(.text+0x2bcb): undefined reference to `extcon_get_state' phy-rockchip-inno-usb2.c:(.text+0x2cd4): undefined reference to `extcon_set_state_sync' phy-rockchip-inno-usb2.c:(.text+0x2cec): undefined reference to `extcon_set_state_sync' phy-rockchip-inno-usb2.c:(.text+0x2d2d): undefined reference to `extcon_get_state' drivers/built-in.o: In function `rockchip_usb2phy_probe': phy-rockchip-inno-usb2.c:(.text+0x31d7): undefined reference to `extcon_get_edev_by_phandle' phy-rockchip-inno-usb2.c:(.text+0x321a): undefined reference to `devm_extcon_dev_allocate' phy-rockchip-inno-usb2.c:(.text+0x3230): undefined reference to `devm_extcon_dev_register' phy-rockchip-inno-usb2.c:(.text+0x375a): undefined reference to `extcon_register_notifier' Found in linux-next but is also needed in mainline. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-01-27 01:42:41 +08:00
depends on EXTCON
phy: rockchip-inno-usb2: select USB_COMMON When USB is disabled, we get a link error for this driver because of the added OTG support drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_otg_sm_work': phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_otg_sm_work+0x1f4): undefined reference to `usb_otg_state_string' drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_probe': phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_probe+0x2c8): undefined reference to `of_usb_get_dr_mode_by_phy' Other phy drivers select USB_COMMON for this, so let's do the same here. Fixes: 0c42fe48fd23 ("phy: rockchip-inno-usb2: support otg-port for rk3399") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-11-16 22:22:39 +08:00
depends on USB_SUPPORT
phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy The newer SoCs (rk3366, rk3399) take a different usb-phy IP block than rk3288 and before, and most of phy-related registers are also different from the past, so a new phy driver is required necessarily. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Suggested-by: Heiko Stuebner <heiko@sntech.de> Suggested-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-22 15:00:44 +08:00
select GENERIC_PHY
phy: rockchip-inno-usb2: select USB_COMMON When USB is disabled, we get a link error for this driver because of the added OTG support drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_otg_sm_work': phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_otg_sm_work+0x1f4): undefined reference to `usb_otg_state_string' drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_probe': phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_probe+0x2c8): undefined reference to `of_usb_get_dr_mode_by_phy' Other phy drivers select USB_COMMON for this, so let's do the same here. Fixes: 0c42fe48fd23 ("phy: rockchip-inno-usb2: support otg-port for rk3399") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-11-16 22:22:39 +08:00
select USB_COMMON
phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy The newer SoCs (rk3366, rk3399) take a different usb-phy IP block than rk3288 and before, and most of phy-related registers are also different from the past, so a new phy driver is required necessarily. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Suggested-by: Heiko Stuebner <heiko@sntech.de> Suggested-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-22 15:00:44 +08:00
help
Support for Rockchip USB2.0 PHY with Innosilicon IP block.
phy: add a driver for the Rockchip SoC internal eMMC PHY This patch to add a generic PHY driver for ROCKCHIP eMMC PHY. Access the PHY via registers provided by GRF (general register files) module. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-02-03 15:22:22 +08:00
config PHY_ROCKCHIP_EMMC
tristate "Rockchip EMMC PHY Driver"
depends on ARCH_ROCKCHIP && OF
select GENERIC_PHY
help
Enable this to support the Rockchip EMMC PHY.
phy: Add driver for rockchip Display Port PHY Add phy driver for the Rockchip DisplayPort PHY module. This is required to get DisplayPort working in Rockchip SoCs. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-02-15 19:01:34 +08:00
config PHY_ROCKCHIP_DP
tristate "Rockchip Display Port PHY Driver"
depends on ARCH_ROCKCHIP && OF
select GENERIC_PHY
help
Enable this to support the Rockchip Display Port PHY.
phy: add a driver for the Rockchip SoC internal PCIe PHY This patch to add a generic PHY driver for rockchip PCIe PHY. Access the PHY via registers provided by GRF (general register files) module. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-01 15:44:54 +08:00
config PHY_ROCKCHIP_PCIE
tristate "Rockchip PCIe PHY Driver"
depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
help
Enable this to support the Rockchip PCIe PHY.
phy: Add USB Type-C PHY driver for rk3399 Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB Type-C PHY is designed to support the USB3 and DP applications. The USB3 operates in SuperSpeed mode and the DP can operate at RBR, HBR and HBR2 data rates. This driver create 2 PHY devices separately for USB3 and DisplyPort, and registers them under the child node. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Tested-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-08-24 13:17:02 +08:00
config PHY_ROCKCHIP_TYPEC
tristate "Rockchip TYPEC PHY Driver"
depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
select EXTCON
select GENERIC_PHY
select RESET_CONTROLLER
help
Enable this to support the Rockchip USB TYPEC PHY.
phy: Add drivers for PCIe and SATA phy on SPEAr13xx ARM based ST Microelectronics's SPEAr1310/40 platforms uses ST's phy (known as 'miphy') for PCIe and SATA. This patch adds drivers for these miphys. This also adds proper bindings for miphys. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Tested-by: Mohit Kumar <mohit.kumar@st.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> [viresh: fixed logs/cclist/checkpatch warnings, broken into smaller patches] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-04-14 17:57:36 +08:00
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
phy: spear1310-miphy: fix driver dependencies ST SPEAR1310-MIPHY support should be available only on ST SPEAr1310 machine. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-09-01 23:03:17 +08:00
depends on MACH_SPEAR1310 || COMPILE_TEST
phy: Add drivers for PCIe and SATA phy on SPEAr13xx ARM based ST Microelectronics's SPEAr1310/40 platforms uses ST's phy (known as 'miphy') for PCIe and SATA. This patch adds drivers for these miphys. This also adds proper bindings for miphys. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Tested-by: Mohit Kumar <mohit.kumar@st.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> [viresh: fixed logs/cclist/checkpatch warnings, broken into smaller patches] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-04-14 17:57:36 +08:00
help
Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
config PHY_ST_SPEAR1340_MIPHY
tristate "ST SPEAR1340-MIPHY driver"
select GENERIC_PHY
phy: spear1340-miphy: fix driver dependencies ST SPEAR1340-MIPHY support should be available only on ST SPEAr1340 machine. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-09-01 23:04:15 +08:00
depends on MACH_SPEAR1340 || COMPILE_TEST
phy: Add drivers for PCIe and SATA phy on SPEAr13xx ARM based ST Microelectronics's SPEAr1310/40 platforms uses ST's phy (known as 'miphy') for PCIe and SATA. This patch adds drivers for these miphys. This also adds proper bindings for miphys. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Tested-by: Mohit Kumar <mohit.kumar@st.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> [viresh: fixed logs/cclist/checkpatch warnings, broken into smaller patches] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-04-14 17:57:36 +08:00
help
Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
ARM: SoC driver changes for 3.17 A handful of driver-related changes. We've had a bunch of them going in through other branches as well, so it's only a part of what we really have this release. Larger pieces are: * Removal of a now unused PWM driver for atmel - This includes AVR32 changes that have been appropriately acked. * Performance counter support for the arm CCN interconnect * OMAP mailbox driver cleanups and consolidation * PCI and SATA PHY drivers for SPEAr 13xx platforms * Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to better model regulators/power. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (GNU/Linux) iQIcBAABAgAGBQJT5DrJAAoJEIwa5zzehBx3wkkP/iwEfEK5mMon9KEe4DcKTKNq Z6xyWuMQNHKdfBFpABs6AsHQCKDc7KK6gN3+2zLLHEJ4XGDPZ2g2NaX3oRPJlaay BDK7rQfIZyi4tmbOnlEv1BDTYgirYBPMwk9RyNo/04Ug3W+Y67aSVo44zkNFBWaJ GbcX/zYsrsfvdawuQMW6V/A835s3Kq5Zhv1ikPr8gDDjswZRBAT6i7FYpBSHQ8K8 bH6C1891Xit6rxXSLXJyrtM8CAet7PtLTqNr/IKdUaJnGD+fJm5EonxW+g8gvhN8 gOEkm3nM60++kdDlzZCQVNr0m1+ih6NNCr6bDLO6rIRpAJM2O+YrN1rWuZaJOu1A pIvifk+wWHT+o52pXk8g9fK4n/ZJydK3IBzDePHMrIROOEiW5tLE3WA+u3NSfMfH WegMt9E2dcB+5gXPeejZ9gFbAHnh2S1oVTZfCYXtuOHrYiEU9U0FA3eRYvJEE2po k8sdiOn7Vc65O1QZ+xZNbLABpAHaye7X2evOJyhSutzHE/AtUvT4vuCAZ0tggXyD E1qVKngVW/NvcoFbwYeidq4bOVgiAEn3idZgF5gEq1mq7LzetXUQAcZAOQfLWHLQ RrXufS7Ez8pSCG74y0AFReVfQH2PgWHPqGUGj99NXgQauexc/vR1Hc5Iqb8liGNJ n6i8RqvvQ4KYcmHEXDIT =fsP6 -----END PGP SIGNATURE----- Merge tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "A handful of driver-related changes. We've had a bunch of them going in through other branches as well, so it's only a part of what we really have this release. Larger pieces are: - Removal of a now unused PWM driver for atmel [ This includes AVR32 changes that have been appropriately acked ] - Performance counter support for the arm CCN interconnect - OMAP mailbox driver cleanups and consolidation - PCI and SATA PHY drivers for SPEAr 13xx platforms - Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to better model regulators/power" Note: this merge also fixes up the semantic conflict with the new calling convention for devm_phy_create(), see commit f0ed817638b5 ("phy: core: Let node ptr of PHY point to PHY and not of PHY provider") that came in through Greg's USB tree. Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through the next tree. * tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: arm-ccn: Fix error handling at event allocation mailbox/omap: add a parent structure for every IP instance mailbox/omap: remove the private mailbox structure mailbox/omap: consolidate OMAP mailbox driver mailbox/omap: simplify the fifo assignment by using macros mailbox/omap: remove omap_mbox_type_t from mailbox ops mailbox/omap: remove OMAP1 mailbox driver mailbox/omap: use devm_* interfaces bus: ARM CCN: add PERF_EVENTS dependency bus: ARM CCN PMU driver PCI: spear: Remove spear13xx_pcie_remove() PCI: spear: Fix Section mismatch compilation warning for probe() ARM: tegra: Remove legacy PCIe power supply properties PCI: tegra: Remove deprecated power supply properties PCI: tegra: Implement accurate power supply scheme ARM: SPEAr13xx: Update defconfigs ARM: SPEAr13xx: Add pcie and miphy DT nodes ARM: SPEAr13xx: Add bindings and dt node for misc block ARM: SPEAr13xx: Fix static mapping table phy: Add drivers for PCIe and SATA phy on SPEAr13xx ...
2014-08-09 02:34:32 +08:00
config PHY_XGENE
tristate "APM X-Gene 15Gbps PHY support"
depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
select GENERIC_PHY
help
This option enables support for APM X-Gene SoC multi-purpose PHY.
phy: phy-stih407-usb: Add usb picoPHY driver found on stih407 SoC family This is the generic phy driver for the picoPHY ports used by the USB2 and USB3 Host controllers when controlling usb2/1.1 devices. It is found on STiH407 SoC family from STMicroelectronics. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-09-12 01:02:44 +08:00
config PHY_STIH407_USB
tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
depends on RESET_CONTROLLER
depends on ARCH_STI || COMPILE_TEST
select GENERIC_PHY
help
Enable this support to enable the picoPHY device used by USB2
and USB3 controllers on STMicroelectronics STiH407 SoC families.
phy: qcom-ufs: add support for QUALCOMM Technologies UFS PHY drivers This change adds a generic and common API support for ufs phy QUALCOMM Technologies. This support provides common code and also points to specific phy callbacks to differentiate between different behaviors of frequent use-cases (like power on, power off, phy calibration etc). Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Dov Levenglick <dovl@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-15 22:32:35 +08:00
config PHY_QCOM_UFS
tristate "Qualcomm UFS PHY driver"
phy: qcom-ufs: Switch dependency to ARCH_QCOM This phy only exists on platforms under ARCH_QCOM, not ARCH_MSM. Cc: Yaniv Gardi <ygardi@codeaurora.org> Cc: Dov Levenglick <dovl@codeaurora.org> Cc: Christoph Hellwig <hch@lst.de> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-11 07:11:04 +08:00
depends on OF && ARCH_QCOM
phy: qcom-ufs: add support for QUALCOMM Technologies UFS PHY drivers This change adds a generic and common API support for ufs phy QUALCOMM Technologies. This support provides common code and also points to specific phy callbacks to differentiate between different behaviors of frequent use-cases (like power on, power off, phy calibration etc). Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Dov Levenglick <dovl@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-15 22:32:35 +08:00
select GENERIC_PHY
help
Support for UFS PHY on QCOM chipsets.
phy: Add support for Qualcomm's USB HS phy The high-speed phy on qcom SoCs is controlled via the ULPI viewport. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: <devicetree@vger.kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-01-26 06:32:45 +08:00
config PHY_QCOM_USB_HS
tristate "Qualcomm USB HS PHY module"
depends on USB_ULPI_BUS
phy: qcom-usb-hs: Add depends on EXTCON We get the following compile errors if EXTCON is enabled as a module but this driver is builtin: drivers/built-in.o: In function `qcom_usb_hs_phy_power_off': phy-qcom-usb-hs.c:(.text+0x1089): undefined reference to `extcon_unregister_notifier' drivers/built-in.o: In function `qcom_usb_hs_phy_probe': phy-qcom-usb-hs.c:(.text+0x11b5): undefined reference to `extcon_get_edev_by_phandle' drivers/built-in.o: In function `qcom_usb_hs_phy_power_on': phy-qcom-usb-hs.c:(.text+0x128e): undefined reference to `extcon_get_state' phy-qcom-usb-hs.c:(.text+0x12a9): undefined reference to `extcon_register_notifier' so let's mark this as needing to follow the modular status of the extcon framework. Fixes: 9994a33865f4 e2427b09ba929c2b9 (phy: Add support for Qualcomm's USB HS phy") Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-03-09 16:15:44 +08:00
depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
phy: Add support for Qualcomm's USB HS phy The high-speed phy on qcom SoCs is controlled via the ULPI viewport. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: <devicetree@vger.kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-01-26 06:32:45 +08:00
select GENERIC_PHY
help
Support for the USB high-speed ULPI compliant phy on Qualcomm
chipsets.
phy: Add support for Qualcomm's USB HSIC phy The HSIC USB controller on qcom SoCs has an integrated all digital phy controlled via the ULPI viewport. Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Rob Herring <robh@kernel.org> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-01-26 06:32:44 +08:00
config PHY_QCOM_USB_HSIC
tristate "Qualcomm USB HSIC ULPI PHY module"
depends on USB_ULPI_BUS
select GENERIC_PHY
help
Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
phy: add driver for TI TUSB1210 ULPI PHY TUSB1210 ULPI PHY has vendor specific register for eye diagram tuning. On some platforms the system firmware has set optimized value to it. In order to not loose the optimized value, the driver stores it during probe and restores it every time the PHY is powered back on. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-13 20:26:53 +08:00
config PHY_TUSB1210
tristate "TI TUSB1210 ULPI PHY module"
depends on USB_ULPI_BUS
select GENERIC_PHY
help
Support for TI TUSB1210 USB ULPI PHY.
phy: Rename phy-brcmstb-sata driver to phy-brcm-sata driver Currently, we have a common SATA3 PHY driver for all Broadcom STB SoCs. This driver can be extended and re-used for Broadcom iProc SoCs having same SATA3 PHY. This patch renames existing Broadcom STB SATA3 PHY driver to common Broadcom SATA3 PHY driver to share this PHY driver across Broadcom SoCs. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-03-28 12:48:26 +08:00
config PHY_BRCM_SATA
tristate "Broadcom SATA PHY driver"
depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs Supports up to two ports which can each be powered on/off and configured independently. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-21 08:18:40 +08:00
depends on OF
select GENERIC_PHY
phy: Rename phy-brcmstb-sata driver to phy-brcm-sata driver Currently, we have a common SATA3 PHY driver for all Broadcom STB SoCs. This driver can be extended and re-used for Broadcom iProc SoCs having same SATA3 PHY. This patch renames existing Broadcom STB SATA3 PHY driver to common Broadcom SATA3 PHY driver to share this PHY driver across Broadcom SoCs. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-03-28 12:48:26 +08:00
default ARCH_BCM_IPROC
phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs Supports up to two ports which can each be powered on/off and configured independently. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-21 08:18:40 +08:00
help
phy: Rename phy-brcmstb-sata driver to phy-brcm-sata driver Currently, we have a common SATA3 PHY driver for all Broadcom STB SoCs. This driver can be extended and re-used for Broadcom iProc SoCs having same SATA3 PHY. This patch renames existing Broadcom STB SATA3 PHY driver to common Broadcom SATA3 PHY driver to share this PHY driver across Broadcom SoCs. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-03-28 12:48:26 +08:00
Enable this to support the Broadcom SATA PHY.
If unsure, say N.
phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs Supports up to two ports which can each be powered on/off and configured independently. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-21 08:18:40 +08:00
phy: cygnus: pcie: Add Cygnus PCIe PHY support This patch adds the PCIe PHY support for the Broadcom PCIe RC interface on Cygnus Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Arun Parameswaran <aparames@broadcom.com> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-09-22 01:17:18 +08:00
config PHY_CYGNUS_PCIE
tristate "Broadcom Cygnus PCIe PHY driver"
depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
select GENERIC_PHY
default ARCH_BCM_CYGNUS
help
Enable this to support the Broadcom Cygnus PCIe PHY.
If unsure, say N.
phy: Add Tegra XUSB pad controller support Add a new driver for the XUSB pad controller found on NVIDIA Tegra SoCs. This hardware block used to be exposed as a pin controller, but it turns out that this isn't a good fit. The new driver and DT binding much more accurately describe the hardware and are more flexible in supporting new SoC generations. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-12 01:24:21 +08:00
source "drivers/phy/tegra/Kconfig"
phy: Add Northstar2 PCI Phy support Add PCI Phy support for Broadcom Northstar2 SoCs. This driver uses the interface from the iproc mdio mux driver to enable the devices respective phys. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 13:33:51 +08:00
config PHY_NS2_PCIE
tristate "Broadcom Northstar2 PCIe PHY driver"
depends on OF && MDIO_BUS_MUX_BCM_IPROC
select GENERIC_PHY
default ARCH_BCM_IPROC
help
Enable this to support the Broadcom Northstar2 PCIe PHY.
If unsure, say N.
phy: meson: add USB2 PHY support for Meson8b and GXBB This is a new driver for the USB PHY found in Meson8b and GXBB SoCs. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-10-01 20:19:00 +08:00
config PHY_MESON8B_USB2
tristate "Meson8b and GXBB USB2 PHY driver"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
depends on USB_SUPPORT
select USB_COMMON
select GENERIC_PHY
help
Enable this to support the Meson USB2 PHYs found in Meson8b
and GXBB SoCs.
If unsure, say N.
drivers: phy: add generic PHY framework The PHY framework provides a set of APIs for the PHY drivers to create/destroy a PHY and APIs for the PHY users to obtain a reference to the PHY with or without using phandle. For dt-boot, the PHY drivers should also register *PHY provider* with the framework. PHY drivers should create the PHY by passing id and ops like init, exit, power_on and power_off. This framework is also pm runtime enabled. The documentation for the generic PHY framework is added in Documentation/phy.txt and the documentation for dt binding can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt Cc: Tomasz Figa <t.figa@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 14:23:25 +08:00
endmenu