2006-03-29 16:21:00 +08:00
|
|
|
|
/*
|
|
|
|
|
* linux/drivers/media/mmc/omap.c
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 2004 Nokia Corporation
|
|
|
|
|
* Written by Tuukka Tikkanen and Juha Yrj<EFBFBD>l<EFBFBD><juha.yrjola@nokia.com>
|
|
|
|
|
* Misc hacks here and there by Tony Lindgren <tony@atomide.com>
|
|
|
|
|
* Other hacks (DMA, SD, etc) by David Brownell
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
#include <linux/moduleparam.h>
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
|
#include <linux/timer.h>
|
|
|
|
|
#include <linux/mmc/host.h>
|
|
|
|
|
#include <linux/mmc/protocol.h>
|
|
|
|
|
#include <linux/mmc/card.h>
|
|
|
|
|
#include <linux/clk.h>
|
|
|
|
|
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
|
#include <asm/irq.h>
|
|
|
|
|
#include <asm/scatterlist.h>
|
|
|
|
|
#include <asm/mach-types.h>
|
|
|
|
|
|
|
|
|
|
#include <asm/arch/board.h>
|
|
|
|
|
#include <asm/arch/gpio.h>
|
|
|
|
|
#include <asm/arch/dma.h>
|
|
|
|
|
#include <asm/arch/mux.h>
|
|
|
|
|
#include <asm/arch/fpga.h>
|
|
|
|
|
#include <asm/arch/tps65010.h>
|
|
|
|
|
|
|
|
|
|
#include "omap.h"
|
|
|
|
|
|
|
|
|
|
#define DRIVER_NAME "mmci-omap"
|
|
|
|
|
#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
|
|
|
|
|
|
|
|
|
|
/* Specifies how often in millisecs to poll for card status changes
|
|
|
|
|
* when the cover switch is open */
|
|
|
|
|
#define OMAP_MMC_SWITCH_POLL_DELAY 500
|
|
|
|
|
|
|
|
|
|
static int mmc_omap_enable_poll = 1;
|
|
|
|
|
|
|
|
|
|
struct mmc_omap_host {
|
|
|
|
|
int initialized;
|
|
|
|
|
int suspended;
|
|
|
|
|
struct mmc_request * mrq;
|
|
|
|
|
struct mmc_command * cmd;
|
|
|
|
|
struct mmc_data * data;
|
|
|
|
|
struct mmc_host * mmc;
|
|
|
|
|
struct device * dev;
|
|
|
|
|
unsigned char id; /* 16xx chips have 2 MMC blocks */
|
|
|
|
|
struct clk * iclk;
|
|
|
|
|
struct clk * fclk;
|
|
|
|
|
void __iomem *base;
|
|
|
|
|
int irq;
|
|
|
|
|
unsigned char bus_mode;
|
|
|
|
|
unsigned char hw_bus_mode;
|
|
|
|
|
|
|
|
|
|
unsigned int sg_len;
|
|
|
|
|
int sg_idx;
|
|
|
|
|
u16 * buffer;
|
|
|
|
|
u32 buffer_bytes_left;
|
|
|
|
|
u32 total_bytes_left;
|
|
|
|
|
|
|
|
|
|
unsigned use_dma:1;
|
|
|
|
|
unsigned brs_received:1, dma_done:1;
|
|
|
|
|
unsigned dma_is_read:1;
|
|
|
|
|
unsigned dma_in_use:1;
|
|
|
|
|
int dma_ch;
|
|
|
|
|
spinlock_t dma_lock;
|
|
|
|
|
struct timer_list dma_timer;
|
|
|
|
|
unsigned dma_len;
|
|
|
|
|
|
|
|
|
|
short power_pin;
|
|
|
|
|
short wp_pin;
|
|
|
|
|
|
|
|
|
|
int switch_pin;
|
|
|
|
|
struct work_struct switch_work;
|
|
|
|
|
struct timer_list switch_timer;
|
|
|
|
|
int switch_last_state;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
|
mmc_omap_cover_is_open(struct mmc_omap_host *host)
|
|
|
|
|
{
|
|
|
|
|
if (host->switch_pin < 0)
|
|
|
|
|
return 0;
|
|
|
|
|
return omap_get_gpio_datain(host->switch_pin);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static ssize_t
|
|
|
|
|
mmc_omap_show_cover_switch(struct device *dev,
|
|
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_omap_host *host = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
|
|
return sprintf(buf, "%s\n", mmc_omap_cover_is_open(host) ? "open" :
|
|
|
|
|
"closed");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
|
|
|
|
|
|
|
|
|
|
static ssize_t
|
|
|
|
|
mmc_omap_show_enable_poll(struct device *dev,
|
|
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
|
|
{
|
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", mmc_omap_enable_poll);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static ssize_t
|
|
|
|
|
mmc_omap_store_enable_poll(struct device *dev,
|
|
|
|
|
struct device_attribute *attr, const char *buf,
|
|
|
|
|
size_t size)
|
|
|
|
|
{
|
|
|
|
|
int enable_poll;
|
|
|
|
|
|
|
|
|
|
if (sscanf(buf, "%10d", &enable_poll) != 1)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
if (enable_poll != mmc_omap_enable_poll) {
|
|
|
|
|
struct mmc_omap_host *host = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
|
|
mmc_omap_enable_poll = enable_poll;
|
|
|
|
|
if (enable_poll && host->switch_pin >= 0)
|
|
|
|
|
schedule_work(&host->switch_work);
|
|
|
|
|
}
|
|
|
|
|
return size;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static DEVICE_ATTR(enable_poll, 0664,
|
|
|
|
|
mmc_omap_show_enable_poll, mmc_omap_store_enable_poll);
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
|
|
|
|
|
{
|
|
|
|
|
u32 cmdreg;
|
|
|
|
|
u32 resptype;
|
|
|
|
|
u32 cmdtype;
|
|
|
|
|
|
|
|
|
|
host->cmd = cmd;
|
|
|
|
|
|
|
|
|
|
resptype = 0;
|
|
|
|
|
cmdtype = 0;
|
|
|
|
|
|
|
|
|
|
/* Our hardware needs to know exact type */
|
|
|
|
|
switch (RSP_TYPE(mmc_resp_type(cmd))) {
|
|
|
|
|
case RSP_TYPE(MMC_RSP_R1):
|
|
|
|
|
/* resp 1, resp 1b */
|
|
|
|
|
resptype = 1;
|
|
|
|
|
break;
|
|
|
|
|
case RSP_TYPE(MMC_RSP_R2):
|
|
|
|
|
resptype = 2;
|
|
|
|
|
break;
|
|
|
|
|
case RSP_TYPE(MMC_RSP_R3):
|
|
|
|
|
resptype = 3;
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) {
|
|
|
|
|
cmdtype = OMAP_MMC_CMDTYPE_ADTC;
|
|
|
|
|
} else if (mmc_cmd_type(cmd) == MMC_CMD_BC) {
|
|
|
|
|
cmdtype = OMAP_MMC_CMDTYPE_BC;
|
|
|
|
|
} else if (mmc_cmd_type(cmd) == MMC_CMD_BCR) {
|
|
|
|
|
cmdtype = OMAP_MMC_CMDTYPE_BCR;
|
|
|
|
|
} else {
|
|
|
|
|
cmdtype = OMAP_MMC_CMDTYPE_AC;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12);
|
|
|
|
|
|
|
|
|
|
if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
|
|
|
|
|
cmdreg |= 1 << 6;
|
|
|
|
|
|
|
|
|
|
if (cmd->flags & MMC_RSP_BUSY)
|
|
|
|
|
cmdreg |= 1 << 11;
|
|
|
|
|
|
|
|
|
|
if (host->data && !(host->data->flags & MMC_DATA_WRITE))
|
|
|
|
|
cmdreg |= 1 << 15;
|
|
|
|
|
|
|
|
|
|
clk_enable(host->fclk);
|
|
|
|
|
|
|
|
|
|
OMAP_MMC_WRITE(host->base, CTO, 200);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, ARGL, cmd->arg & 0xffff);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, ARGH, cmd->arg >> 16);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, IE,
|
|
|
|
|
OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL |
|
|
|
|
|
OMAP_MMC_STAT_CMD_CRC | OMAP_MMC_STAT_CMD_TOUT |
|
|
|
|
|
OMAP_MMC_STAT_DATA_CRC | OMAP_MMC_STAT_DATA_TOUT |
|
|
|
|
|
OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR |
|
|
|
|
|
OMAP_MMC_STAT_END_OF_DATA);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, CMD, cmdreg);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
|
|
|
|
|
{
|
|
|
|
|
if (host->dma_in_use) {
|
|
|
|
|
enum dma_data_direction dma_data_dir;
|
|
|
|
|
|
|
|
|
|
BUG_ON(host->dma_ch < 0);
|
|
|
|
|
if (data->error != MMC_ERR_NONE)
|
|
|
|
|
omap_stop_dma(host->dma_ch);
|
|
|
|
|
/* Release DMA channel lazily */
|
|
|
|
|
mod_timer(&host->dma_timer, jiffies + HZ);
|
|
|
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
|
|
|
dma_data_dir = DMA_TO_DEVICE;
|
|
|
|
|
else
|
|
|
|
|
dma_data_dir = DMA_FROM_DEVICE;
|
|
|
|
|
dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len,
|
|
|
|
|
dma_data_dir);
|
|
|
|
|
}
|
|
|
|
|
host->data = NULL;
|
|
|
|
|
host->sg_len = 0;
|
|
|
|
|
clk_disable(host->fclk);
|
|
|
|
|
|
|
|
|
|
/* NOTE: MMC layer will sometimes poll-wait CMD13 next, issuing
|
|
|
|
|
* dozens of requests until the card finishes writing data.
|
|
|
|
|
* It'd be cheaper to just wait till an EOFB interrupt arrives...
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
if (!data->stop) {
|
|
|
|
|
host->mrq = NULL;
|
|
|
|
|
mmc_request_done(host->mmc, data->mrq);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
mmc_omap_start_command(host, data->stop);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
mmc_omap_end_of_data(struct mmc_omap_host *host, struct mmc_data *data)
|
|
|
|
|
{
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
int done;
|
|
|
|
|
|
|
|
|
|
if (!host->dma_in_use) {
|
|
|
|
|
mmc_omap_xfer_done(host, data);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
done = 0;
|
|
|
|
|
spin_lock_irqsave(&host->dma_lock, flags);
|
|
|
|
|
if (host->dma_done)
|
|
|
|
|
done = 1;
|
|
|
|
|
else
|
|
|
|
|
host->brs_received = 1;
|
|
|
|
|
spin_unlock_irqrestore(&host->dma_lock, flags);
|
|
|
|
|
if (done)
|
|
|
|
|
mmc_omap_xfer_done(host, data);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
mmc_omap_dma_timer(unsigned long data)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_omap_host *host = (struct mmc_omap_host *) data;
|
|
|
|
|
|
|
|
|
|
BUG_ON(host->dma_ch < 0);
|
|
|
|
|
omap_free_dma(host->dma_ch);
|
|
|
|
|
host->dma_ch = -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
mmc_omap_dma_done(struct mmc_omap_host *host, struct mmc_data *data)
|
|
|
|
|
{
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
int done;
|
|
|
|
|
|
|
|
|
|
done = 0;
|
|
|
|
|
spin_lock_irqsave(&host->dma_lock, flags);
|
|
|
|
|
if (host->brs_received)
|
|
|
|
|
done = 1;
|
|
|
|
|
else
|
|
|
|
|
host->dma_done = 1;
|
|
|
|
|
spin_unlock_irqrestore(&host->dma_lock, flags);
|
|
|
|
|
if (done)
|
|
|
|
|
mmc_omap_xfer_done(host, data);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
|
|
|
|
|
{
|
|
|
|
|
host->cmd = NULL;
|
|
|
|
|
|
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
|
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
|
|
|
/* response type 2 */
|
|
|
|
|
cmd->resp[3] =
|
|
|
|
|
OMAP_MMC_READ(host->base, RSP0) |
|
|
|
|
|
(OMAP_MMC_READ(host->base, RSP1) << 16);
|
|
|
|
|
cmd->resp[2] =
|
|
|
|
|
OMAP_MMC_READ(host->base, RSP2) |
|
|
|
|
|
(OMAP_MMC_READ(host->base, RSP3) << 16);
|
|
|
|
|
cmd->resp[1] =
|
|
|
|
|
OMAP_MMC_READ(host->base, RSP4) |
|
|
|
|
|
(OMAP_MMC_READ(host->base, RSP5) << 16);
|
|
|
|
|
cmd->resp[0] =
|
|
|
|
|
OMAP_MMC_READ(host->base, RSP6) |
|
|
|
|
|
(OMAP_MMC_READ(host->base, RSP7) << 16);
|
|
|
|
|
} else {
|
|
|
|
|
/* response types 1, 1b, 3, 4, 5, 6 */
|
|
|
|
|
cmd->resp[0] =
|
|
|
|
|
OMAP_MMC_READ(host->base, RSP6) |
|
|
|
|
|
(OMAP_MMC_READ(host->base, RSP7) << 16);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (host->data == NULL || cmd->error != MMC_ERR_NONE) {
|
|
|
|
|
host->mrq = NULL;
|
|
|
|
|
clk_disable(host->fclk);
|
|
|
|
|
mmc_request_done(host->mmc, cmd->mrq);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* PIO only */
|
|
|
|
|
static void
|
|
|
|
|
mmc_omap_sg_to_buf(struct mmc_omap_host *host)
|
|
|
|
|
{
|
|
|
|
|
struct scatterlist *sg;
|
|
|
|
|
|
|
|
|
|
sg = host->data->sg + host->sg_idx;
|
|
|
|
|
host->buffer_bytes_left = sg->length;
|
|
|
|
|
host->buffer = page_address(sg->page) + sg->offset;
|
|
|
|
|
if (host->buffer_bytes_left > host->total_bytes_left)
|
|
|
|
|
host->buffer_bytes_left = host->total_bytes_left;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* PIO only */
|
|
|
|
|
static void
|
|
|
|
|
mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
|
|
|
|
|
{
|
|
|
|
|
int n;
|
|
|
|
|
void __iomem *reg;
|
|
|
|
|
u16 *p;
|
|
|
|
|
|
|
|
|
|
if (host->buffer_bytes_left == 0) {
|
|
|
|
|
host->sg_idx++;
|
|
|
|
|
BUG_ON(host->sg_idx == host->sg_len);
|
|
|
|
|
mmc_omap_sg_to_buf(host);
|
|
|
|
|
}
|
|
|
|
|
n = 64;
|
|
|
|
|
if (n > host->buffer_bytes_left)
|
|
|
|
|
n = host->buffer_bytes_left;
|
|
|
|
|
host->buffer_bytes_left -= n;
|
|
|
|
|
host->total_bytes_left -= n;
|
|
|
|
|
host->data->bytes_xfered += n;
|
|
|
|
|
|
|
|
|
|
if (write) {
|
|
|
|
|
__raw_writesw(host->base + OMAP_MMC_REG_DATA, host->buffer, n);
|
|
|
|
|
} else {
|
|
|
|
|
__raw_readsw(host->base + OMAP_MMC_REG_DATA, host->buffer, n);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void mmc_omap_report_irq(u16 status)
|
|
|
|
|
{
|
|
|
|
|
static const char *mmc_omap_status_bits[] = {
|
|
|
|
|
"EOC", "CD", "CB", "BRS", "EOFB", "DTO", "DCRC", "CTO",
|
|
|
|
|
"CCRC", "CRW", "AF", "AE", "OCRB", "CIRQ", "CERR"
|
|
|
|
|
};
|
|
|
|
|
int i, c = 0;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
|
|
|
|
|
if (status & (1 << i)) {
|
|
|
|
|
if (c)
|
|
|
|
|
printk(" ");
|
|
|
|
|
printk("%s", mmc_omap_status_bits[i]);
|
|
|
|
|
c++;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static irqreturn_t mmc_omap_irq(int irq, void *dev_id, struct pt_regs *regs)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_omap_host * host = (struct mmc_omap_host *)dev_id;
|
|
|
|
|
u16 status;
|
|
|
|
|
int end_command;
|
|
|
|
|
int end_transfer;
|
|
|
|
|
int transfer_error;
|
|
|
|
|
|
|
|
|
|
if (host->cmd == NULL && host->data == NULL) {
|
|
|
|
|
status = OMAP_MMC_READ(host->base, STAT);
|
|
|
|
|
dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
|
|
|
|
|
if (status != 0) {
|
|
|
|
|
OMAP_MMC_WRITE(host->base, STAT, status);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, IE, 0);
|
|
|
|
|
}
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
end_command = 0;
|
|
|
|
|
end_transfer = 0;
|
|
|
|
|
transfer_error = 0;
|
|
|
|
|
|
|
|
|
|
while ((status = OMAP_MMC_READ(host->base, STAT)) != 0) {
|
|
|
|
|
OMAP_MMC_WRITE(host->base, STAT, status);
|
|
|
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "MMC IRQ %04x (CMD %d): ",
|
|
|
|
|
status, host->cmd != NULL ? host->cmd->opcode : -1);
|
|
|
|
|
mmc_omap_report_irq(status);
|
|
|
|
|
printk("\n");
|
|
|
|
|
#endif
|
|
|
|
|
if (host->total_bytes_left) {
|
|
|
|
|
if ((status & OMAP_MMC_STAT_A_FULL) ||
|
|
|
|
|
(status & OMAP_MMC_STAT_END_OF_DATA))
|
|
|
|
|
mmc_omap_xfer_data(host, 0);
|
|
|
|
|
if (status & OMAP_MMC_STAT_A_EMPTY)
|
|
|
|
|
mmc_omap_xfer_data(host, 1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (status & OMAP_MMC_STAT_END_OF_DATA) {
|
|
|
|
|
end_transfer = 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (status & OMAP_MMC_STAT_DATA_TOUT) {
|
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "data timeout\n");
|
|
|
|
|
if (host->data) {
|
|
|
|
|
host->data->error |= MMC_ERR_TIMEOUT;
|
|
|
|
|
transfer_error = 1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (status & OMAP_MMC_STAT_DATA_CRC) {
|
|
|
|
|
if (host->data) {
|
|
|
|
|
host->data->error |= MMC_ERR_BADCRC;
|
|
|
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
|
|
|
"data CRC error, bytes left %d\n",
|
|
|
|
|
host->total_bytes_left);
|
|
|
|
|
transfer_error = 1;
|
|
|
|
|
} else {
|
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "data CRC error\n");
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (status & OMAP_MMC_STAT_CMD_TOUT) {
|
|
|
|
|
/* Timeouts are routine with some commands */
|
|
|
|
|
if (host->cmd) {
|
|
|
|
|
if (host->cmd->opcode != MMC_ALL_SEND_CID &&
|
|
|
|
|
host->cmd->opcode !=
|
|
|
|
|
MMC_SEND_OP_COND &&
|
|
|
|
|
host->cmd->opcode !=
|
|
|
|
|
MMC_APP_CMD &&
|
|
|
|
|
!mmc_omap_cover_is_open(host))
|
|
|
|
|
dev_err(mmc_dev(host->mmc),
|
|
|
|
|
"command timeout, CMD %d\n",
|
|
|
|
|
host->cmd->opcode);
|
|
|
|
|
host->cmd->error = MMC_ERR_TIMEOUT;
|
|
|
|
|
end_command = 1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (status & OMAP_MMC_STAT_CMD_CRC) {
|
|
|
|
|
if (host->cmd) {
|
|
|
|
|
dev_err(mmc_dev(host->mmc),
|
|
|
|
|
"command CRC error (CMD%d, arg 0x%08x)\n",
|
|
|
|
|
host->cmd->opcode, host->cmd->arg);
|
|
|
|
|
host->cmd->error = MMC_ERR_BADCRC;
|
|
|
|
|
end_command = 1;
|
|
|
|
|
} else
|
|
|
|
|
dev_err(mmc_dev(host->mmc),
|
|
|
|
|
"command CRC error without cmd?\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (status & OMAP_MMC_STAT_CARD_ERR) {
|
|
|
|
|
if (host->cmd && host->cmd->opcode == MMC_STOP_TRANSMISSION) {
|
|
|
|
|
u32 response = OMAP_MMC_READ(host->base, RSP6)
|
|
|
|
|
| (OMAP_MMC_READ(host->base, RSP7) << 16);
|
|
|
|
|
/* STOP sometimes sets must-ignore bits */
|
|
|
|
|
if (!(response & (R1_CC_ERROR
|
|
|
|
|
| R1_ILLEGAL_COMMAND
|
|
|
|
|
| R1_COM_CRC_ERROR))) {
|
|
|
|
|
end_command = 1;
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "card status error (CMD%d)\n",
|
|
|
|
|
host->cmd->opcode);
|
|
|
|
|
if (host->cmd) {
|
|
|
|
|
host->cmd->error = MMC_ERR_FAILED;
|
|
|
|
|
end_command = 1;
|
|
|
|
|
}
|
|
|
|
|
if (host->data) {
|
|
|
|
|
host->data->error = MMC_ERR_FAILED;
|
|
|
|
|
transfer_error = 1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* NOTE: On 1610 the END_OF_CMD may come too early when
|
|
|
|
|
* starting a write
|
|
|
|
|
*/
|
|
|
|
|
if ((status & OMAP_MMC_STAT_END_OF_CMD) &&
|
|
|
|
|
(!(status & OMAP_MMC_STAT_A_EMPTY))) {
|
|
|
|
|
end_command = 1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (end_command) {
|
|
|
|
|
mmc_omap_cmd_done(host, host->cmd);
|
|
|
|
|
}
|
|
|
|
|
if (transfer_error)
|
|
|
|
|
mmc_omap_xfer_done(host, host->data);
|
|
|
|
|
else if (end_transfer)
|
|
|
|
|
mmc_omap_end_of_data(host, host->data);
|
|
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static irqreturn_t mmc_omap_switch_irq(int irq, void *dev_id, struct pt_regs *regs)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_omap_host *host = (struct mmc_omap_host *) dev_id;
|
|
|
|
|
|
|
|
|
|
schedule_work(&host->switch_work);
|
|
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void mmc_omap_switch_timer(unsigned long arg)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_omap_host *host = (struct mmc_omap_host *) arg;
|
|
|
|
|
|
|
|
|
|
schedule_work(&host->switch_work);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* FIXME: Handle card insertion and removal properly. Maybe use a mask
|
|
|
|
|
* for MMC state? */
|
|
|
|
|
static void mmc_omap_switch_callback(unsigned long data, u8 mmc_mask)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void mmc_omap_switch_handler(void *data)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_omap_host *host = (struct mmc_omap_host *) data;
|
|
|
|
|
struct mmc_card *card;
|
|
|
|
|
static int complained = 0;
|
|
|
|
|
int cards = 0, cover_open;
|
|
|
|
|
|
|
|
|
|
if (host->switch_pin == -1)
|
|
|
|
|
return;
|
|
|
|
|
cover_open = mmc_omap_cover_is_open(host);
|
|
|
|
|
if (cover_open != host->switch_last_state) {
|
|
|
|
|
kobject_uevent(&host->dev->kobj, KOBJ_CHANGE);
|
|
|
|
|
host->switch_last_state = cover_open;
|
|
|
|
|
}
|
|
|
|
|
mmc_detect_change(host->mmc, 0);
|
|
|
|
|
list_for_each_entry(card, &host->mmc->cards, node) {
|
|
|
|
|
if (mmc_card_present(card))
|
|
|
|
|
cards++;
|
|
|
|
|
}
|
|
|
|
|
if (mmc_omap_cover_is_open(host)) {
|
|
|
|
|
if (!complained) {
|
|
|
|
|
dev_info(mmc_dev(host->mmc), "cover is open");
|
|
|
|
|
complained = 1;
|
|
|
|
|
}
|
|
|
|
|
if (mmc_omap_enable_poll)
|
|
|
|
|
mod_timer(&host->switch_timer, jiffies +
|
|
|
|
|
msecs_to_jiffies(OMAP_MMC_SWITCH_POLL_DELAY));
|
|
|
|
|
} else {
|
|
|
|
|
complained = 0;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Prepare to transfer the next segment of a scatterlist */
|
|
|
|
|
static void
|
|
|
|
|
mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data)
|
|
|
|
|
{
|
|
|
|
|
int dma_ch = host->dma_ch;
|
|
|
|
|
unsigned long data_addr;
|
|
|
|
|
u16 buf, frame;
|
|
|
|
|
u32 count;
|
|
|
|
|
struct scatterlist *sg = &data->sg[host->sg_idx];
|
|
|
|
|
int src_port = 0;
|
|
|
|
|
int dst_port = 0;
|
|
|
|
|
int sync_dev = 0;
|
|
|
|
|
|
|
|
|
|
data_addr = io_v2p((u32) host->base) + OMAP_MMC_REG_DATA;
|
2006-06-05 00:51:15 +08:00
|
|
|
|
frame = data->blksz;
|
2006-03-29 16:21:00 +08:00
|
|
|
|
count = sg_dma_len(sg);
|
|
|
|
|
|
2006-06-05 00:51:15 +08:00
|
|
|
|
if ((data->blocks == 1) && (count > data->blksz))
|
2006-03-29 16:21:00 +08:00
|
|
|
|
count = frame;
|
|
|
|
|
|
|
|
|
|
host->dma_len = count;
|
|
|
|
|
|
|
|
|
|
/* FIFO is 16x2 bytes on 15xx, and 32x2 bytes on 16xx and 24xx.
|
|
|
|
|
* Use 16 or 32 word frames when the blocksize is at least that large.
|
|
|
|
|
* Blocksize is usually 512 bytes; but not for some SD reads.
|
|
|
|
|
*/
|
|
|
|
|
if (cpu_is_omap15xx() && frame > 32)
|
|
|
|
|
frame = 32;
|
|
|
|
|
else if (frame > 64)
|
|
|
|
|
frame = 64;
|
|
|
|
|
count /= frame;
|
|
|
|
|
frame >>= 1;
|
|
|
|
|
|
|
|
|
|
if (!(data->flags & MMC_DATA_WRITE)) {
|
|
|
|
|
buf = 0x800f | ((frame - 1) << 8);
|
|
|
|
|
|
|
|
|
|
if (cpu_class_is_omap1()) {
|
|
|
|
|
src_port = OMAP_DMA_PORT_TIPB;
|
|
|
|
|
dst_port = OMAP_DMA_PORT_EMIFF;
|
|
|
|
|
}
|
|
|
|
|
if (cpu_is_omap24xx())
|
|
|
|
|
sync_dev = OMAP24XX_DMA_MMC1_RX;
|
|
|
|
|
|
|
|
|
|
omap_set_dma_src_params(dma_ch, src_port,
|
|
|
|
|
OMAP_DMA_AMODE_CONSTANT,
|
|
|
|
|
data_addr, 0, 0);
|
|
|
|
|
omap_set_dma_dest_params(dma_ch, dst_port,
|
|
|
|
|
OMAP_DMA_AMODE_POST_INC,
|
|
|
|
|
sg_dma_address(sg), 0, 0);
|
|
|
|
|
omap_set_dma_dest_data_pack(dma_ch, 1);
|
|
|
|
|
omap_set_dma_dest_burst_mode(dma_ch, OMAP_DMA_DATA_BURST_4);
|
|
|
|
|
} else {
|
|
|
|
|
buf = 0x0f80 | ((frame - 1) << 0);
|
|
|
|
|
|
|
|
|
|
if (cpu_class_is_omap1()) {
|
|
|
|
|
src_port = OMAP_DMA_PORT_EMIFF;
|
|
|
|
|
dst_port = OMAP_DMA_PORT_TIPB;
|
|
|
|
|
}
|
|
|
|
|
if (cpu_is_omap24xx())
|
|
|
|
|
sync_dev = OMAP24XX_DMA_MMC1_TX;
|
|
|
|
|
|
|
|
|
|
omap_set_dma_dest_params(dma_ch, dst_port,
|
|
|
|
|
OMAP_DMA_AMODE_CONSTANT,
|
|
|
|
|
data_addr, 0, 0);
|
|
|
|
|
omap_set_dma_src_params(dma_ch, src_port,
|
|
|
|
|
OMAP_DMA_AMODE_POST_INC,
|
|
|
|
|
sg_dma_address(sg), 0, 0);
|
|
|
|
|
omap_set_dma_src_data_pack(dma_ch, 1);
|
|
|
|
|
omap_set_dma_src_burst_mode(dma_ch, OMAP_DMA_DATA_BURST_4);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Max limit for DMA frame count is 0xffff */
|
|
|
|
|
if (unlikely(count > 0xffff))
|
|
|
|
|
BUG();
|
|
|
|
|
|
|
|
|
|
OMAP_MMC_WRITE(host->base, BUF, buf);
|
|
|
|
|
omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S16,
|
|
|
|
|
frame, count, OMAP_DMA_SYNC_FRAME,
|
|
|
|
|
sync_dev, 0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* A scatterlist segment completed */
|
|
|
|
|
static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_omap_host *host = (struct mmc_omap_host *) data;
|
|
|
|
|
struct mmc_data *mmcdat = host->data;
|
|
|
|
|
|
|
|
|
|
if (unlikely(host->dma_ch < 0)) {
|
|
|
|
|
dev_err(mmc_dev(host->mmc), "DMA callback while DMA not
|
|
|
|
|
enabled\n");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
/* FIXME: We really should do something to _handle_ the errors */
|
|
|
|
|
if (ch_status & OMAP_DMA_TOUT_IRQ) {
|
|
|
|
|
dev_err(mmc_dev(host->mmc),"DMA timeout\n");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
if (ch_status & OMAP_DMA_DROP_IRQ) {
|
|
|
|
|
dev_err(mmc_dev(host->mmc), "DMA sync error\n");
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
if (!(ch_status & OMAP_DMA_BLOCK_IRQ)) {
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
mmcdat->bytes_xfered += host->dma_len;
|
|
|
|
|
host->sg_idx++;
|
|
|
|
|
if (host->sg_idx < host->sg_len) {
|
|
|
|
|
mmc_omap_prepare_dma(host, host->data);
|
|
|
|
|
omap_start_dma(host->dma_ch);
|
|
|
|
|
} else
|
|
|
|
|
mmc_omap_dma_done(host, host->data);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int mmc_omap_get_dma_channel(struct mmc_omap_host *host, struct mmc_data *data)
|
|
|
|
|
{
|
|
|
|
|
const char *dev_name;
|
|
|
|
|
int sync_dev, dma_ch, is_read, r;
|
|
|
|
|
|
|
|
|
|
is_read = !(data->flags & MMC_DATA_WRITE);
|
|
|
|
|
del_timer_sync(&host->dma_timer);
|
|
|
|
|
if (host->dma_ch >= 0) {
|
|
|
|
|
if (is_read == host->dma_is_read)
|
|
|
|
|
return 0;
|
|
|
|
|
omap_free_dma(host->dma_ch);
|
|
|
|
|
host->dma_ch = -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (is_read) {
|
|
|
|
|
if (host->id == 1) {
|
|
|
|
|
sync_dev = OMAP_DMA_MMC_RX;
|
|
|
|
|
dev_name = "MMC1 read";
|
|
|
|
|
} else {
|
|
|
|
|
sync_dev = OMAP_DMA_MMC2_RX;
|
|
|
|
|
dev_name = "MMC2 read";
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
if (host->id == 1) {
|
|
|
|
|
sync_dev = OMAP_DMA_MMC_TX;
|
|
|
|
|
dev_name = "MMC1 write";
|
|
|
|
|
} else {
|
|
|
|
|
sync_dev = OMAP_DMA_MMC2_TX;
|
|
|
|
|
dev_name = "MMC2 write";
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
r = omap_request_dma(sync_dev, dev_name, mmc_omap_dma_cb,
|
|
|
|
|
host, &dma_ch);
|
|
|
|
|
if (r != 0) {
|
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "omap_request_dma() failed with %d\n", r);
|
|
|
|
|
return r;
|
|
|
|
|
}
|
|
|
|
|
host->dma_ch = dma_ch;
|
|
|
|
|
host->dma_is_read = is_read;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_request *req)
|
|
|
|
|
{
|
|
|
|
|
u16 reg;
|
|
|
|
|
|
|
|
|
|
reg = OMAP_MMC_READ(host->base, SDIO);
|
|
|
|
|
reg &= ~(1 << 5);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, SDIO, reg);
|
|
|
|
|
/* Set maximum timeout */
|
|
|
|
|
OMAP_MMC_WRITE(host->base, CTO, 0xff);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req)
|
|
|
|
|
{
|
|
|
|
|
int timeout;
|
|
|
|
|
u16 reg;
|
|
|
|
|
|
|
|
|
|
/* Convert ns to clock cycles by assuming 20MHz frequency
|
|
|
|
|
* 1 cycle at 20MHz = 500 ns
|
|
|
|
|
*/
|
|
|
|
|
timeout = req->data->timeout_clks + req->data->timeout_ns / 500;
|
|
|
|
|
|
|
|
|
|
/* Check if we need to use timeout multiplier register */
|
|
|
|
|
reg = OMAP_MMC_READ(host->base, SDIO);
|
|
|
|
|
if (timeout > 0xffff) {
|
|
|
|
|
reg |= (1 << 5);
|
|
|
|
|
timeout /= 1024;
|
|
|
|
|
} else
|
|
|
|
|
reg &= ~(1 << 5);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, SDIO, reg);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, DTO, timeout);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_data *data = req->data;
|
|
|
|
|
int i, use_dma, block_size;
|
|
|
|
|
unsigned sg_len;
|
|
|
|
|
|
|
|
|
|
host->data = data;
|
|
|
|
|
if (data == NULL) {
|
|
|
|
|
OMAP_MMC_WRITE(host->base, BLEN, 0);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, NBLK, 0);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, BUF, 0);
|
|
|
|
|
host->dma_in_use = 0;
|
|
|
|
|
set_cmd_timeout(host, req);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
2006-06-05 00:51:15 +08:00
|
|
|
|
block_size = data->blksz;
|
2006-03-29 16:21:00 +08:00
|
|
|
|
|
|
|
|
|
OMAP_MMC_WRITE(host->base, NBLK, data->blocks - 1);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, BLEN, block_size - 1);
|
|
|
|
|
set_data_timeout(host, req);
|
|
|
|
|
|
|
|
|
|
/* cope with calling layer confusion; it issues "single
|
|
|
|
|
* block" writes using multi-block scatterlists.
|
|
|
|
|
*/
|
|
|
|
|
sg_len = (data->blocks == 1) ? 1 : data->sg_len;
|
|
|
|
|
|
|
|
|
|
/* Only do DMA for entire blocks */
|
|
|
|
|
use_dma = host->use_dma;
|
|
|
|
|
if (use_dma) {
|
|
|
|
|
for (i = 0; i < sg_len; i++) {
|
|
|
|
|
if ((data->sg[i].length % block_size) != 0) {
|
|
|
|
|
use_dma = 0;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
host->sg_idx = 0;
|
|
|
|
|
if (use_dma) {
|
|
|
|
|
if (mmc_omap_get_dma_channel(host, data) == 0) {
|
|
|
|
|
enum dma_data_direction dma_data_dir;
|
|
|
|
|
|
|
|
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
|
|
|
dma_data_dir = DMA_TO_DEVICE;
|
|
|
|
|
else
|
|
|
|
|
dma_data_dir = DMA_FROM_DEVICE;
|
|
|
|
|
|
|
|
|
|
host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
|
|
|
|
|
sg_len, dma_data_dir);
|
|
|
|
|
host->total_bytes_left = 0;
|
|
|
|
|
mmc_omap_prepare_dma(host, req->data);
|
|
|
|
|
host->brs_received = 0;
|
|
|
|
|
host->dma_done = 0;
|
|
|
|
|
host->dma_in_use = 1;
|
|
|
|
|
} else
|
|
|
|
|
use_dma = 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Revert to PIO? */
|
|
|
|
|
if (!use_dma) {
|
|
|
|
|
OMAP_MMC_WRITE(host->base, BUF, 0x1f1f);
|
|
|
|
|
host->total_bytes_left = data->blocks * block_size;
|
|
|
|
|
host->sg_len = sg_len;
|
|
|
|
|
mmc_omap_sg_to_buf(host);
|
|
|
|
|
host->dma_in_use = 0;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_omap_host *host = mmc_priv(mmc);
|
|
|
|
|
|
|
|
|
|
WARN_ON(host->mrq != NULL);
|
|
|
|
|
|
|
|
|
|
host->mrq = req;
|
|
|
|
|
|
|
|
|
|
/* only touch fifo AFTER the controller readies it */
|
|
|
|
|
mmc_omap_prepare_data(host, req);
|
|
|
|
|
mmc_omap_start_command(host, req->cmd);
|
|
|
|
|
if (host->dma_in_use)
|
|
|
|
|
omap_start_dma(host->dma_ch);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void innovator_fpga_socket_power(int on)
|
|
|
|
|
{
|
|
|
|
|
#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
|
|
|
|
|
|
|
|
|
|
if (on) {
|
|
|
|
|
fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
|
|
|
|
|
OMAP1510_FPGA_POWER);
|
|
|
|
|
} else {
|
|
|
|
|
fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
|
|
|
|
|
OMAP1510_FPGA_POWER);
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Turn the socket power on/off. Innovator uses FPGA, most boards
|
|
|
|
|
* probably use GPIO.
|
|
|
|
|
*/
|
|
|
|
|
static void mmc_omap_power(struct mmc_omap_host *host, int on)
|
|
|
|
|
{
|
|
|
|
|
if (on) {
|
|
|
|
|
if (machine_is_omap_innovator())
|
|
|
|
|
innovator_fpga_socket_power(1);
|
|
|
|
|
else if (machine_is_omap_h2())
|
|
|
|
|
tps65010_set_gpio_out_value(GPIO3, HIGH);
|
|
|
|
|
else if (machine_is_omap_h3())
|
|
|
|
|
/* GPIO 4 of TPS65010 sends SD_EN signal */
|
|
|
|
|
tps65010_set_gpio_out_value(GPIO4, HIGH);
|
|
|
|
|
else if (cpu_is_omap24xx()) {
|
|
|
|
|
u16 reg = OMAP_MMC_READ(host->base, CON);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, CON, reg | (1 << 11));
|
|
|
|
|
} else
|
|
|
|
|
if (host->power_pin >= 0)
|
|
|
|
|
omap_set_gpio_dataout(host->power_pin, 1);
|
|
|
|
|
} else {
|
|
|
|
|
if (machine_is_omap_innovator())
|
|
|
|
|
innovator_fpga_socket_power(0);
|
|
|
|
|
else if (machine_is_omap_h2())
|
|
|
|
|
tps65010_set_gpio_out_value(GPIO3, LOW);
|
|
|
|
|
else if (machine_is_omap_h3())
|
|
|
|
|
tps65010_set_gpio_out_value(GPIO4, LOW);
|
|
|
|
|
else if (cpu_is_omap24xx()) {
|
|
|
|
|
u16 reg = OMAP_MMC_READ(host->base, CON);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, CON, reg & ~(1 << 11));
|
|
|
|
|
} else
|
|
|
|
|
if (host->power_pin >= 0)
|
|
|
|
|
omap_set_gpio_dataout(host->power_pin, 0);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_omap_host *host = mmc_priv(mmc);
|
|
|
|
|
int dsor;
|
|
|
|
|
int realclock, i;
|
|
|
|
|
|
|
|
|
|
realclock = ios->clock;
|
|
|
|
|
|
|
|
|
|
if (ios->clock == 0)
|
|
|
|
|
dsor = 0;
|
|
|
|
|
else {
|
|
|
|
|
int func_clk_rate = clk_get_rate(host->fclk);
|
|
|
|
|
|
|
|
|
|
dsor = func_clk_rate / realclock;
|
|
|
|
|
if (dsor < 1)
|
|
|
|
|
dsor = 1;
|
|
|
|
|
|
|
|
|
|
if (func_clk_rate / dsor > realclock)
|
|
|
|
|
dsor++;
|
|
|
|
|
|
|
|
|
|
if (dsor > 250)
|
|
|
|
|
dsor = 250;
|
|
|
|
|
dsor++;
|
|
|
|
|
|
|
|
|
|
if (ios->bus_width == MMC_BUS_WIDTH_4)
|
|
|
|
|
dsor |= 1 << 15;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
switch (ios->power_mode) {
|
|
|
|
|
case MMC_POWER_OFF:
|
|
|
|
|
mmc_omap_power(host, 0);
|
|
|
|
|
break;
|
|
|
|
|
case MMC_POWER_UP:
|
|
|
|
|
case MMC_POWER_ON:
|
|
|
|
|
mmc_omap_power(host, 1);
|
|
|
|
|
dsor |= 1<<11;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
host->bus_mode = ios->bus_mode;
|
|
|
|
|
host->hw_bus_mode = host->bus_mode;
|
|
|
|
|
|
|
|
|
|
clk_enable(host->fclk);
|
|
|
|
|
|
|
|
|
|
/* On insanely high arm_per frequencies something sometimes
|
|
|
|
|
* goes somehow out of sync, and the POW bit is not being set,
|
|
|
|
|
* which results in the while loop below getting stuck.
|
|
|
|
|
* Writing to the CON register twice seems to do the trick. */
|
|
|
|
|
for (i = 0; i < 2; i++)
|
|
|
|
|
OMAP_MMC_WRITE(host->base, CON, dsor);
|
|
|
|
|
if (ios->power_mode == MMC_POWER_UP) {
|
|
|
|
|
/* Send clock cycles, poll completion */
|
|
|
|
|
OMAP_MMC_WRITE(host->base, IE, 0);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, STAT, 0xffff);
|
|
|
|
|
OMAP_MMC_WRITE(host->base, CMD, 1<<7);
|
|
|
|
|
while (0 == (OMAP_MMC_READ(host->base, STAT) & 1));
|
|
|
|
|
OMAP_MMC_WRITE(host->base, STAT, 1);
|
|
|
|
|
}
|
|
|
|
|
clk_disable(host->fclk);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int mmc_omap_get_ro(struct mmc_host *mmc)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_omap_host *host = mmc_priv(mmc);
|
|
|
|
|
|
|
|
|
|
return host->wp_pin && omap_get_gpio_datain(host->wp_pin);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct mmc_host_ops mmc_omap_ops = {
|
|
|
|
|
.request = mmc_omap_request,
|
|
|
|
|
.set_ios = mmc_omap_set_ios,
|
|
|
|
|
.get_ro = mmc_omap_get_ro,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int __init mmc_omap_probe(struct platform_device *pdev)
|
|
|
|
|
{
|
|
|
|
|
struct omap_mmc_conf *minfo = pdev->dev.platform_data;
|
|
|
|
|
struct mmc_host *mmc;
|
|
|
|
|
struct mmc_omap_host *host = NULL;
|
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
|
|
if (platform_get_resource(pdev, IORESOURCE_MEM, 0) ||
|
|
|
|
|
platform_get_irq(pdev, IORESOURCE_IRQ, 0)) {
|
|
|
|
|
dev_err(&pdev->dev, "mmc_omap_probe: invalid resource type\n");
|
|
|
|
|
return -ENODEV;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (!request_mem_region(pdev->resource[0].start,
|
|
|
|
|
pdev->resource[0].end - pdev->resource[0].start + 1,
|
|
|
|
|
pdev->name)) {
|
|
|
|
|
dev_dbg(&pdev->dev, "request_mem_region failed\n");
|
|
|
|
|
return -EBUSY;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
|
|
|
|
|
if (!mmc) {
|
|
|
|
|
ret = -ENOMEM;
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
host = mmc_priv(mmc);
|
|
|
|
|
host->mmc = mmc;
|
|
|
|
|
|
|
|
|
|
spin_lock_init(&host->dma_lock);
|
|
|
|
|
init_timer(&host->dma_timer);
|
|
|
|
|
host->dma_timer.function = mmc_omap_dma_timer;
|
|
|
|
|
host->dma_timer.data = (unsigned long) host;
|
|
|
|
|
|
|
|
|
|
host->id = pdev->id;
|
|
|
|
|
|
|
|
|
|
if (cpu_is_omap24xx()) {
|
|
|
|
|
host->iclk = clk_get(&pdev->dev, "mmc_ick");
|
|
|
|
|
if (IS_ERR(host->iclk))
|
|
|
|
|
goto out;
|
|
|
|
|
clk_enable(host->iclk);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (!cpu_is_omap24xx())
|
|
|
|
|
host->fclk = clk_get(&pdev->dev, "mmc_ck");
|
|
|
|
|
else
|
|
|
|
|
host->fclk = clk_get(&pdev->dev, "mmc_fck");
|
|
|
|
|
|
|
|
|
|
if (IS_ERR(host->fclk)) {
|
|
|
|
|
ret = PTR_ERR(host->fclk);
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* REVISIT:
|
|
|
|
|
* Also, use minfo->cover to decide how to manage
|
|
|
|
|
* the card detect sensing.
|
|
|
|
|
*/
|
|
|
|
|
host->power_pin = minfo->power_pin;
|
|
|
|
|
host->switch_pin = minfo->switch_pin;
|
|
|
|
|
host->wp_pin = minfo->wp_pin;
|
|
|
|
|
host->use_dma = 1;
|
|
|
|
|
host->dma_ch = -1;
|
|
|
|
|
|
|
|
|
|
host->irq = pdev->resource[1].start;
|
|
|
|
|
host->base = ioremap(pdev->res.start, SZ_4K);
|
|
|
|
|
if (!host->base) {
|
|
|
|
|
ret = -ENOMEM;
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (minfo->wire4)
|
|
|
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
|
|
|
|
|
|
|
|
mmc->ops = &mmc_omap_ops;
|
|
|
|
|
mmc->f_min = 400000;
|
|
|
|
|
mmc->f_max = 24000000;
|
|
|
|
|
mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
|
|
|
|
|
|
|
|
|
|
/* Use scatterlist DMA to reduce per-transfer costs.
|
|
|
|
|
* NOTE max_seg_size assumption that small blocks aren't
|
|
|
|
|
* normally used (except e.g. for reading SD registers).
|
|
|
|
|
*/
|
|
|
|
|
mmc->max_phys_segs = 32;
|
|
|
|
|
mmc->max_hw_segs = 32;
|
|
|
|
|
mmc->max_sectors = 256; /* NBLK max 11-bits, OMAP also limited by DMA */
|
|
|
|
|
mmc->max_seg_size = mmc->max_sectors * 512;
|
|
|
|
|
|
|
|
|
|
if (host->power_pin >= 0) {
|
|
|
|
|
if ((ret = omap_request_gpio(host->power_pin)) != 0) {
|
|
|
|
|
dev_err(mmc_dev(host->mmc), "Unable to get GPIO
|
|
|
|
|
pin for MMC power\n");
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
omap_set_gpio_direction(host->power_pin, 0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ret = request_irq(host->irq, mmc_omap_irq, 0, DRIVER_NAME, host);
|
|
|
|
|
if (ret)
|
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
|
|
host->dev = &pdev->dev;
|
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
|
|
|
|
|
|
mmc_add_host(mmc);
|
|
|
|
|
|
|
|
|
|
if (host->switch_pin >= 0) {
|
|
|
|
|
INIT_WORK(&host->switch_work, mmc_omap_switch_handler, host);
|
|
|
|
|
init_timer(&host->switch_timer);
|
|
|
|
|
host->switch_timer.function = mmc_omap_switch_timer;
|
|
|
|
|
host->switch_timer.data = (unsigned long) host;
|
|
|
|
|
if (omap_request_gpio(host->switch_pin) != 0) {
|
|
|
|
|
dev_warn(mmc_dev(host->mmc), "Unable to get GPIO pin for MMC cover switch\n");
|
|
|
|
|
host->switch_pin = -1;
|
|
|
|
|
goto no_switch;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
omap_set_gpio_direction(host->switch_pin, 1);
|
|
|
|
|
ret = request_irq(OMAP_GPIO_IRQ(host->switch_pin),
|
|
|
|
|
mmc_omap_switch_irq, SA_TRIGGER_RISING, DRIVER_NAME, host);
|
|
|
|
|
if (ret) {
|
|
|
|
|
dev_warn(mmc_dev(host->mmc), "Unable to get IRQ for MMC cover switch\n");
|
|
|
|
|
omap_free_gpio(host->switch_pin);
|
|
|
|
|
host->switch_pin = -1;
|
|
|
|
|
goto no_switch;
|
|
|
|
|
}
|
|
|
|
|
ret = device_create_file(&pdev->dev, &dev_attr_cover_switch);
|
|
|
|
|
if (ret == 0) {
|
|
|
|
|
ret = device_create_file(&pdev->dev, &dev_attr_enable_poll);
|
|
|
|
|
if (ret != 0)
|
|
|
|
|
device_remove_file(&pdev->dev, &dev_attr_cover_switch);
|
|
|
|
|
}
|
|
|
|
|
if (ret) {
|
|
|
|
|
dev_wan(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
|
|
|
|
|
free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
|
|
|
|
|
omap_free_gpio(host->switch_pin);
|
|
|
|
|
host->switch_pin = -1;
|
|
|
|
|
goto no_switch;
|
|
|
|
|
}
|
|
|
|
|
if (mmc_omap_enable_poll && mmc_omap_cover_is_open(host))
|
|
|
|
|
schedule_work(&host->switch_work);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
no_switch:
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
out:
|
|
|
|
|
/* FIXME: Free other resources too. */
|
|
|
|
|
if (host) {
|
|
|
|
|
if (host->iclk && !IS_ERR(host->iclk))
|
|
|
|
|
clk_put(host->iclk);
|
|
|
|
|
if (host->fclk && !IS_ERR(host->fclk))
|
|
|
|
|
clk_put(host->fclk);
|
|
|
|
|
mmc_free_host(host->mmc);
|
|
|
|
|
}
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int mmc_omap_remove(struct platform_device *pdev)
|
|
|
|
|
{
|
|
|
|
|
struct mmc_omap_host *host = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
|
|
|
|
|
|
if (host) {
|
|
|
|
|
mmc_remove_host(host->mmc);
|
|
|
|
|
free_irq(host->irq, host);
|
|
|
|
|
|
|
|
|
|
if (host->power_pin >= 0)
|
|
|
|
|
omap_free_gpio(host->power_pin);
|
|
|
|
|
if (host->switch_pin >= 0) {
|
|
|
|
|
device_remove_file(&pdev->dev, &dev_attr_enable_poll);
|
|
|
|
|
device_remove_file(&pdev->dev, &dev_attr_cover_switch);
|
|
|
|
|
free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
|
|
|
|
|
omap_free_gpio(host->switch_pin);
|
|
|
|
|
host->switch_pin = -1;
|
|
|
|
|
del_timer_sync(&host->switch_timer);
|
|
|
|
|
flush_scheduled_work();
|
|
|
|
|
}
|
|
|
|
|
if (host->iclk && !IS_ERR(host->iclk))
|
|
|
|
|
clk_put(host->iclk);
|
|
|
|
|
if (host->fclk && !IS_ERR(host->fclk))
|
|
|
|
|
clk_put(host->fclk);
|
|
|
|
|
mmc_free_host(host->mmc);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
release_mem_region(pdev->resource[0].start,
|
|
|
|
|
pdev->resource[0].end - pdev->resource[0].start + 1);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
|
static int mmc_omap_suspend(struct platform_device *pdev, pm_message_t mesg)
|
|
|
|
|
{
|
|
|
|
|
int ret = 0;
|
|
|
|
|
struct mmc_omap_host *host = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
|
|
if (host && host->suspended)
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
if (host) {
|
|
|
|
|
ret = mmc_suspend_host(host->mmc, mesg);
|
|
|
|
|
if (ret == 0)
|
|
|
|
|
host->suspended = 1;
|
|
|
|
|
}
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int mmc_omap_resume(struct platform_device *pdev)
|
|
|
|
|
{
|
|
|
|
|
int ret = 0;
|
|
|
|
|
struct mmc_omap_host *host = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
|
|
if (host && !host->suspended)
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
if (host) {
|
|
|
|
|
ret = mmc_resume_host(host->mmc);
|
|
|
|
|
if (ret == 0)
|
|
|
|
|
host->suspended = 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
#else
|
|
|
|
|
#define mmc_omap_suspend NULL
|
|
|
|
|
#define mmc_omap_resume NULL
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static struct platform_driver mmc_omap_driver = {
|
|
|
|
|
.probe = mmc_omap_probe,
|
|
|
|
|
.remove = mmc_omap_remove,
|
|
|
|
|
.suspend = mmc_omap_suspend,
|
|
|
|
|
.resume = mmc_omap_resume,
|
|
|
|
|
.driver = {
|
|
|
|
|
.name = DRIVER_NAME,
|
|
|
|
|
},
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int __init mmc_omap_init(void)
|
|
|
|
|
{
|
|
|
|
|
return platform_driver_register(&mmc_omap_driver);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void __exit mmc_omap_exit(void)
|
|
|
|
|
{
|
|
|
|
|
platform_driver_unregister(&mmc_omap_driver);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
module_init(mmc_omap_init);
|
|
|
|
|
module_exit(mmc_omap_exit);
|
|
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("OMAP Multimedia Card driver");
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
MODULE_ALIAS(DRIVER_NAME);
|
|
|
|
|
MODULE_AUTHOR("Juha Yrj<72>l<EFBFBD>");
|