p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/net/phy/Kconfig

302 lines
8.3 KiB
Plaintext
Raw Normal View History

This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
#
# PHY Layer Configuration
#
Use menuconfig objects: PHY Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 13:52:55 +08:00
menuconfig PHYLIB
net: Revert ARCNET and PHYLIB to tristate options commit 88491d8103498a6166f70d5999902fec70924314 ("drivers/net: Kconfig & Makefile cleanup") changed the type of these options to bool, but they select code that could (and still can) be built as modules. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-25 22:40:02 +08:00
tristate "PHY Device support and infrastructure"
phylib: available for any speed ethernet Several gigabit network drivers (SB1250_MAC, TIGON3, FSL, GIANFAR, UCC_GETH, MV643XX_ETH, XILINX_LL_TEMAC, S6GMAC, STMMAC_ETH, PASEMI_MAC, and OCTEON_ETHERNET) select PHYLIB. These drivers are not under NET_ETHERNET (10/100 mbit), so this warning is generated (long, irrelevant parts are omitted): warning: (NET_DSA && NET && EXPERIMENTAL && NET_ETHERNET && !S390 || ... || SB1250_MAC && NETDEVICES && NETDEV_1000 && SIBYTE_SB1xxx_SOC || TIGON3 && NETDEVICES && NETDEV_1000 && PCI || FSL_PQ_MDIO && NETDEVICES && NETDEV_1000 && FSL_SOC || GIANFAR && NETDEVICES && NETDEV_1000 && FSL_SOC || UCC_GETH && NETDEVICES && NETDEV_1000 && QUICC_ENGINE || MV643XX_ETH && NETDEVICES && NETDEV_1000 && (MV64X60 || PPC32 || PLAT_ORION) || XILINX_LL_TEMAC && NETDEVICES && NETDEV_1000 && (PPC || MICROBLAZE) || S6GMAC && NETDEVICES && NETDEV_1000 && XTENSA_VARIANT_S6000 || STMMAC_ETH && NETDEV_1000 && NETDEVICES && CPU_SUBTYPE_ST40 || PASEMI_MAC && NETDEVICES && NETDEV_10000 && PPC_PASEMI && PCI || OCTEON_ETHERNET && STAGING && !STAGING_EXCLUDE_BUILD && CPU_CAVIUM_OCTEON) selects PHYLIB which has unmet direct dependencies (!S390 && NET_ETHERNET) PHYLIB is used by non-10/100 mbit ethernet drivers, so change the dependencies to be NETDEVICES instead of NET_ETHERNET. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-11 21:26:57 +08:00
depends on NETDEVICES
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
help
Ethernet controllers are usually attached to PHY
devices. This option provides infrastructure for
managing PHY devices.
Use menuconfig objects: PHY Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 13:52:55 +08:00
if PHYLIB
phy: move fixed_phy MII register generation to a library Move the fixed_phy MII register generation to a library to allow other software phy implementations to use this code. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23 21:50:05 +08:00
config SWPHY
bool
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
comment "MII PHY device drivers"
net: phy: add driver for aquantia phy This patch added driver to support Aquantia PHYs AQ1202, AQ2104, AQR105, AQR405, which accessed through clause 45. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 16:58:42 +08:00
config AQUANTIA_PHY
tristate "Drivers for the Aquantia PHYs"
---help---
Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
phy: add AT803x driver This driver add support for wake over lan on AT803x phys. Signed-off-by: Matus Ujhelyi <ujhelyi.m@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-15 03:07:16 +08:00
config AT803X_PHY
tristate "Drivers for Atheros AT803X PHYs"
---help---
Currently supports the AT8030 and AT8035 model
phy: add am79c874 PHY support Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-18 19:03:05 +08:00
config AMD_PHY
tristate "Drivers for the AMD PHYs"
---help---
Currently supports the am79c874
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
config MARVELL_PHY
Fix numerous minor problems with new phy subsystem. Includes fixes for problems noted by Adrian Bunk, Andrew Morton, and one other person lost in the annals of history (and email folders).
2005-08-11 14:07:25 +08:00
tristate "Drivers for Marvell PHYs"
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
---help---
Currently has a driver for the 88E1011S
config DAVICOM_PHY
Fix numerous minor problems with new phy subsystem. Includes fixes for problems noted by Adrian Bunk, Andrew Morton, and one other person lost in the annals of history (and email folders).
2005-08-11 14:07:25 +08:00
tristate "Drivers for Davicom PHYs"
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
---help---
Currently supports dm9161e and dm9131
config QSEMI_PHY
Fix numerous minor problems with new phy subsystem. Includes fixes for problems noted by Adrian Bunk, Andrew Morton, and one other person lost in the annals of history (and email folders).
2005-08-11 14:07:25 +08:00
tristate "Drivers for Quality Semiconductor PHYs"
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
---help---
Currently supports the qs6612
config LXT_PHY
Fix numerous minor problems with new phy subsystem. Includes fixes for problems noted by Adrian Bunk, Andrew Morton, and one other person lost in the annals of history (and email folders).
2005-08-11 14:07:25 +08:00
tristate "Drivers for the Intel LXT PHYs"
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
---help---
Currently supports the lxt970, lxt971
config CICADA_PHY
Fix numerous minor problems with new phy subsystem. Includes fixes for problems noted by Adrian Bunk, Andrew Morton, and one other person lost in the annals of history (and email folders).
2005-08-11 14:07:25 +08:00
tristate "Drivers for the Cicada PHYs"
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
---help---
Currently supports the cis8204
Use menuconfig objects: PHY Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 13:52:55 +08:00
[POWERPC] Add Vitesse 8244 PHY for MPC8641 HPCN platform. Signed-off-by: Kriston Carson <KristonCarson@freescale.com> Signed-off-by: Xianghua Xiao <x.xiao@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-18 06:52:55 +08:00
config VITESSE_PHY
tristate "Drivers for the Vitesse PHYs"
---help---
Currently supports the vsc8244
This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31 07:31:23 +08:00
phylib: add driver for Teranetics TN2020 Teranetics TN2020 is compliant with IEEE 802.3an 10 Gigabit. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 11:19:46 +08:00
config TERANETICS_PHY
tristate "Drivers for the Teranetics PHYs"
---help---
Currently supports the Teranetics TN2020
[PATCH] phy: new SMSC LAN83C185 PHY driver new SMSC LAN83C185 10BaseT/100BaseTX PHY driver for the PHY subsystem Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-08 05:22:53 +08:00
config SMSC_PHY
tristate "Drivers for SMSC PHYs"
---help---
Add support for SMSC LAN8187 and LAN8700 PHYs Add support for two additional SMSC PHY models with identical interrupt source and mask registers to the LAN83C185 Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29 01:37:29 +08:00
Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
[PATCH] phy: new SMSC LAN83C185 PHY driver new SMSC LAN83C185 10BaseT/100BaseTX PHY driver for the PHY subsystem Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-08 05:22:53 +08:00
net: phy: Add Broadcom phy library for common interfaces This patch adds the Broadcom phy library to consolidate common interfaces shared by Broadcom phy's. Moved the common interfaces to the 'bcm-phy-lib.c' and updated the Broadcom PHY drivers to use the new APIs. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:48 +08:00
config BCM_NET_PHYLIB
tristate
[PATCH] 2.6.18: sb1250-mac: Broadcom PHY support This patch adds support for interrupt-driven operation of the Broadcom Gigabit Ethernet PHYs. I have included device IDs for the parts used on Broadcom SiByte evaluation boards; more can be added as a need arises. They are apparently generally software-compatible with one another. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> patch-mips-2.6.18-20060920-broadcom-phy-15 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-03 23:18:13 +08:00
config BROADCOM_PHY
tristate "Drivers for Broadcom PHYs"
net: phy: Add Broadcom phy library for common interfaces This patch adds the Broadcom phy library to consolidate common interfaces shared by Broadcom phy's. Moved the common interfaces to the 'bcm-phy-lib.c' and updated the Broadcom PHY drivers to use the new APIs. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:48 +08:00
select BCM_NET_PHYLIB
[PATCH] 2.6.18: sb1250-mac: Broadcom PHY support This patch adds support for interrupt-driven operation of the Broadcom Gigabit Ethernet PHYs. I have included device IDs for the parts used on Broadcom SiByte evaluation boards; more can be added as a need arises. They are apparently generally software-compatible with one another. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> patch-mips-2.6.18-20060920-broadcom-phy-15 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-03 23:18:13 +08:00
---help---
net: phy: broadcom: Add BCM54616S phy entry Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-08 18:15:18 +08:00
Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
BCM5481 and BCM5482 PHYs.
[PATCH] 2.6.18: sb1250-mac: Broadcom PHY support This patch adds support for interrupt-driven operation of the Broadcom Gigabit Ethernet PHYs. I have included device IDs for the parts used on Broadcom SiByte evaluation boards; more can be added as a need arises. They are apparently generally software-compatible with one another. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> patch-mips-2.6.18-20060920-broadcom-phy-15 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-03 23:18:13 +08:00
net: phy: Broadcom Cygnus internal Etherent PHY driver Add support for the Broadcom Cygnus SoCs internal PHY's. The PHYs are 1000M/100M/10M capable with support for 'EEE' and 'APD' (Auto Power Down). This driver supports the following Broadcom Cygnus SoCs: - BCM583XX (BCM58300, BCM58302, BCM58303, BCM58305) - BCM113XX (BCM11300, BCM11320, BCM11350, BCM11360) The PHY's on these SoC's require some workarounds for stable operation, both during configuration time and during suspend/resume. This driver handles the application of the workarounds. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:49 +08:00
config BCM_CYGNUS_PHY
tristate "Drivers for Broadcom Cygnus SoC internal PHY"
depends on ARCH_BCM_CYGNUS || COMPILE_TEST
depends on MDIO_BCM_IPROC
select BCM_NET_PHYLIB
---help---
This PHY driver is for the 1G internal PHYs of the Broadcom
Cygnus Family SoC.
Currently supports internal PHY's used in the BCM11300,
BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
BCM58303 & BCM58305 Broadcom Cygnus SoCs.
MIPS: BCM63XX: Add integrated ethernet PHY support for phylib. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/phy/Kconfig | 6 ++ drivers/net/phy/Makefile | 1 drivers/net/phy/bcm63xx.c | 132 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 139 insertions(+) create mode 100644 drivers/net/phy/bcm63xx.c Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-01 09:29:36 +08:00
config BCM63XX_PHY
tristate "Drivers for Broadcom 63xx SOCs internal PHY"
phylib: Allow BCM63XX PHY to be selected only on BCM63XX. This PHY is available integrated into BCM63xx series SOCs only. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/phy/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Acked-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-15 06:07:58 +08:00
depends on BCM63XX
net: phy: Add Broadcom phy library for common interfaces This patch adds the Broadcom phy library to consolidate common interfaces shared by Broadcom phy's. Moved the common interfaces to the 'bcm-phy-lib.c' and updated the Broadcom PHY drivers to use the new APIs. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:48 +08:00
select BCM_NET_PHYLIB
MIPS: BCM63XX: Add integrated ethernet PHY support for phylib. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/phy/Kconfig | 6 ++ drivers/net/phy/Makefile | 1 drivers/net/phy/bcm63xx.c | 132 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 139 insertions(+) create mode 100644 drivers/net/phy/bcm63xx.c Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-01 09:29:36 +08:00
---help---
Currently supports the 6348 and 6358 PHYs.
net: phy: add Broadcom BCM7xxx internal PHY driver This patch adds support for the Broadcom BCM7xxx Set Top Box SoCs internal PHYs. This driver supports the following generation of SoCs: - BCM7366, BCM7439, BCM7445 (28nm process) - all 40nm and 65nm (older MIPS-based SoCs) The PHYs on these SoCs require a bunch of workarounds to operate correctly, both during configuration time and at suspend/resume time, the driver handles that for us. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14 08:08:45 +08:00
config BCM7XXX_PHY
tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
net: phy: Add Broadcom phy library for common interfaces This patch adds the Broadcom phy library to consolidate common interfaces shared by Broadcom phy's. Moved the common interfaces to the 'bcm-phy-lib.c' and updated the Broadcom PHY drivers to use the new APIs. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:48 +08:00
select BCM_NET_PHYLIB
net: phy: add Broadcom BCM7xxx internal PHY driver This patch adds support for the Broadcom BCM7xxx Set Top Box SoCs internal PHYs. This driver supports the following generation of SoCs: - BCM7366, BCM7439, BCM7445 (28nm process) - all 40nm and 65nm (older MIPS-based SoCs) The PHYs on these SoCs require a bunch of workarounds to operate correctly, both during configuration time and at suspend/resume time, the driver handles that for us. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14 08:08:45 +08:00
---help---
Currently supports the BCM7366, BCM7439, BCM7445, and
40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs Add a driver for BCM8706 and BCM8727 devices. These are a 10Gig PHYs which use MII_ADDR_C45 addressing. They are always 10G full duplex, so there is no autonegotiation. All we do is report link state and send interrupts when it changes. If the PHY has a device tree of_node associated with it, the "broadcom,c45-reg-init" property is used to supply register initialization values when config_init() is called. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27 15:33:38 +08:00
config BCM87XX_PHY
tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
help
Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
phylib: add the ICPlus IP175C PHY driver The ICPlus IP175C sports a 100Mbit/s 4-port switch in addition to a dedicated 100Mbit/s WAN port. Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-12 07:24:51 +08:00
config ICPLUS_PHY
tristate "Drivers for ICPlus PHYs"
---help---
phy: add the IC+ IP1001 driver This patch adds the IC+ IP1001 (Gigabit Ethernet Transceiver) driver. I've had to add an additional delay (2ns) to adjust RX clock phase at GMII/ RGMII interface (according to the PHY data-sheet). This helps to have the RGMII working on some ST platforms. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09 07:05:13 +08:00
Currently supports the IP175C and IP1001 PHYs.
phylib: add the ICPlus IP175C PHY driver The ICPlus IP175C sports a 100Mbit/s 4-port switch in addition to a dedicated 100Mbit/s WAN port. Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-12 07:24:51 +08:00
phylib: Add Realtek 821x eth PHY support this PHY present on the MPC8315E and MPC837xE RDB boards. Signed-off-by: Johnson Leung <r58129@freescale.com> Signed-off-by: Kevin Lam <r43770@freescale.com> Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 19:50:54 +08:00
config REALTEK_PHY
tristate "Drivers for Realtek PHYs"
---help---
Supports the Realtek 821x PHY.
phy: add natsemi PHY driver This patch adds the PHY device driver for the National Semiconductor DP83865 Gig PHYTER. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29 08:14:12 +08:00
config NATIONAL_PHY
tristate "Drivers for National Semiconductor PHYs"
---help---
Currently supports the DP83865 PHY.
phy: add the ST ste10Xp PHYs This patch adds the STMicroelectronics ste10xp PHY device driver. It supports both the ste100p and the ste101p devices. Suspend/resume alredy added. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29 08:42:41 +08:00
config STE10XP
tristate "Driver for STMicroelectronics STe10Xp PHYs"
---help---
This is the driver for the STe100p and STe101p PHYs.
phy: Add LSI ET1011C PHY driver Adds LSI ET1011C PHY driver. This driver is used by TI DM646x EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 14:21:25 +08:00
config LSI_ET1011C_PHY
tristate "Driver for LSI ET1011C PHY"
---help---
Supports the LSI ET1011C PHY.
drivers/net/phy: micrel phy driver This is the first version of phy driver from Micrel Inc. Signed-off-by: David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-29 14:12:41 +08:00
config MICREL_PHY
tristate "Driver for Micrel PHYs"
---help---
Supports the KSZ9021, VSC8201, KS8001 PHYs.
net: phy: dp83848: Add TI DP83848 Ethernet PHY Add support for the TI DP83848 Ethernet PHY device. The DP83848 is a highly reliable, feature rich, IEEE 802.3 compliant single port 10/100 Mb/s Ethernet Physical Layer Transceiver supporting the MII and RMII interfaces. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21 05:28:57 +08:00
config DP83848_PHY
tristate "Driver for Texas Instruments DP83848 PHY"
---help---
Supports the DP83848 PHY.
net: phy: dp83867: Add TI dp83867 phy Add support for the TI dp83867 Gigabit ethernet phy device. The DP83867 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02 22:34:37 +08:00
config DP83867_PHY
tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
---help---
Currently supports the DP83867 PHY.
add microchip LAN88xx phy driver Add Microchip LAN88XX phy driver for phylib. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-10 04:49:53 +08:00
config MICROCHIP_PHY
tristate "Drivers for Microchip PHYs"
help
Supports the LAN88XX PHYs.
[PATCH] PAL: Support of the fixed PHY This makes it possible for HW PHY-less boards to utilize PAL goodies. Generic routines to connect to fixed PHY are provided, as well as ability to specify software callback that fills up link, speed, etc. information into PHY descriptor (the latter feature not tested so far). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-15 14:00:29 +08:00
config FIXED_PHY
net: Allow FIXED_PHY to be modular. Otherwise we get things like: warning: (NET_DSA_BCM_SF2 && BCMGENET && SYSTEMPORT) selects FIXED_PHY which has unmet direct dependencies (NETDEVICES && PHYLIB=y) In order to make this work we have to rename fixed.c to fixed_phy.c because the regulator drivers already have a module named "fixed.o". Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-17 03:30:09 +08:00
tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB
phy: move fixed_phy MII register generation to a library Move the fixed_phy MII register generation to a library to allow other software phy implementations to use this code. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23 21:50:05 +08:00
select SWPHY
[PATCH] PAL: Support of the fixed PHY This makes it possible for HW PHY-less boards to utilize PAL goodies. Generic routines to connect to fixed PHY are provided, as well as ability to specify software callback that fills up link, speed, etc. information into PHY descriptor (the latter feature not tested so far). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-15 14:00:29 +08:00
---help---
phy/fixed.c: rework to not duplicate PHY layer functionality With that patch fixed.c now fully emulates MDIO bus, thus no need to duplicate PHY layer functionality. That, in turn, drastically simplifies the code, and drops down line count. As an additional bonus, now there is no need to register MDIO bus for each PHY, all emulated PHYs placed on the platform fixed MDIO bus. There is also no more need to pre-allocate PHYs via .config option, this is all now handled dynamically. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07 06:51:22 +08:00
Adds the platform "fixed" MDIO Bus to cover the boards that use
PHYs that are not connected to the real MDIO bus.
Currently tested with mpc866ads and mpc8349e-mitx.
PHY fixed driver: rework release path and update phy_id notation device_bind_driver() error code returning has been fixed. release() function has been written, so that to free resources in correct way; the release path is now clean. Before the rework, it used to cause Device 'fixed@100:1' does not have a release() function, it is broken and must be fixed. BUG: at drivers/base/core.c:104 device_release() Call Trace: [<ffffffff802ec380>] kobject_cleanup+0x53/0x7e [<ffffffff802ec3ab>] kobject_release+0x0/0x9 [<ffffffff802ecf3f>] kref_put+0x74/0x81 [<ffffffff8035493b>] fixed_mdio_register_device+0x230/0x265 [<ffffffff80564d31>] fixed_init+0x1f/0x35 [<ffffffff802071a4>] init+0x147/0x2fb [<ffffffff80223b6e>] schedule_tail+0x36/0x92 [<ffffffff8020a678>] child_rip+0xa/0x12 [<ffffffff80311714>] acpi_ds_init_one_object+0x0/0x83 [<ffffffff8020705d>] init+0x0/0x2fb [<ffffffff8020a66e>] child_rip+0x0/0x12 Also changed the notation of the fixed phy definition on mdio bus to the form of <speed>+<duplex> to make it able to be used by gianfar and ucc_geth that define phy_id strictly as "%d:%d" and cleaned up the whitespace issues. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-11 05:05:16 +08:00
Generic bitbanged MDIO library Previously, bitbanged MDIO was only supported in individual hardware-specific drivers. This code factors out the higher level protocol implementation, reducing the hardware-specific portion to functions setting direction, data, and clock. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-02 03:20:56 +08:00
config MDIO_BITBANG
tristate "Support for bitbanged MDIO buses"
help
This module implements the MDIO bus protocol in software,
for use by low level drivers that export the ability to
drive the relevant pins.
If in doubt, say N.
phylib: rename mdio-ofgpio to mdio-gpio Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-14 08:24:28 +08:00
config MDIO_GPIO
net: OpenFirmware GPIO based MDIO bitbang driver This patch adds an MDIO bitbang driver that uses the GPIO library and its OF bindings to access the bus I/Os. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-26 17:53:21 +08:00
tristate "Support for GPIO lib-based bitbanged MDIO buses"
Convert selectors of GENERIC_GPIO to GPIOLIB GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-03-28 19:34:56 +08:00
depends on MDIO_BITBANG && GPIOLIB
net: OpenFirmware GPIO based MDIO bitbang driver This patch adds an MDIO bitbang driver that uses the GPIO library and its OF bindings to access the bus I/Os. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-26 17:53:21 +08:00
---help---
Supports GPIO lib-based MDIO busses.
phylib: make mdio-gpio work without OF (v4) make mdio-gpio work with non OpenFirmware gpio implementation. Aditional changes to mdio-gpio: - use gpio_request() and gpio_free() - place irq[] array in struct mdio_gpio_info - add module description, author and license - add note about compiling this driver as module - rename mdc and mdio function (were ugly names) - change MII to MDIO in bus name - add __init __exit to module (un)loading functions - probe fails if no phys added to the bus - kzalloc bitbang with sizeof(*bitbang) Changes since v3: - keep bus naming "%x" to be compatible with existing drivers. Changes since v2: - more #ifdefs reduction - platform driver will be registered on OF platforms also - unified platform and OF bus_id to phy%i Changes since v1: - removed NO_IRQ - reduced #idefs Laurent, please test this driver under OF. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-14 08:24:34 +08:00
To compile this driver as a module, choose M here: the module
will be called mdio-gpio.
phy: mdio-octeon: Refactor into two files/modules A follow-on patch uses PCI probing to find the Thunder MDIO hardware. In preparation for this, split out the common code into a new file mdio-cavium.c, which will be used by both the existing OCTEON driver, and the new Thunder PCI based driver. As part of the refactoring simplify the struct cavium_mdiobus by removing fields that are only ever used in the probe function and can just as well be local variables. Use readq/writeq in preference to readq_relaxed/writeq_relaxed as the relaxed form was an optimization for an early chip revision, and the MDIO drivers are not performance bottlenecks that need optimization in the first place. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-12 01:53:10 +08:00
config MDIO_CAVIUM
tristate
NET: Add driver for Octeon MDIO buses. The Octeon SOC has two types of Ethernet ports, each type with its own driver. However, the PHYs for all the ports are controlled by a common MDIO bus. Because the mdio driver is not associated with a particular driver, but is instead a system level resource, we create s stand-alone driver for it. As for the driver, we put the register definitions in arch/mips/include/asm/octeon where most of the other Octeon register definitions live. This is a platform driver with the platform device for "mdio-octeon" being registered in the platform startup code. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-10-15 03:04:38 +08:00
config MDIO_OCTEON
phy: mdio-octeon: Refactor into two files/modules A follow-on patch uses PCI probing to find the Thunder MDIO hardware. In preparation for this, split out the common code into a new file mdio-cavium.c, which will be used by both the existing OCTEON driver, and the new Thunder PCI based driver. As part of the refactoring simplify the struct cavium_mdiobus by removing fields that are only ever used in the probe function and can just as well be local variables. Use readq/writeq in preference to readq_relaxed/writeq_relaxed as the relaxed form was an optimization for an early chip revision, and the MDIO drivers are not performance bottlenecks that need optimization in the first place. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-12 01:53:10 +08:00
tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"
net: mdio-octeon: Modify driver to work on both ThunderX and Octeon This patch modifies the mdio-octeon driver to work on both ThunderX and Octeon SoCs from Cavium Inc. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29 06:12:11 +08:00
depends on 64BIT
net: Fix dependencies for !HAS_IOMEM archs Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-26 06:24:12 +08:00
depends on HAS_IOMEM
phy: mdio-octeon: Refactor into two files/modules A follow-on patch uses PCI probing to find the Thunder MDIO hardware. In preparation for this, split out the common code into a new file mdio-cavium.c, which will be used by both the existing OCTEON driver, and the new Thunder PCI based driver. As part of the refactoring simplify the struct cavium_mdiobus by removing fields that are only ever used in the probe function and can just as well be local variables. Use readq/writeq in preference to readq_relaxed/writeq_relaxed as the relaxed form was an optimization for an early chip revision, and the MDIO drivers are not performance bottlenecks that need optimization in the first place. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-12 01:53:10 +08:00
select MDIO_CAVIUM
NET: Add driver for Octeon MDIO buses. The Octeon SOC has two types of Ethernet ports, each type with its own driver. However, the PHYs for all the ports are controlled by a common MDIO bus. Because the mdio driver is not associated with a particular driver, but is instead a system level resource, we create s stand-alone driver for it. As for the driver, we put the register definitions in arch/mips/include/asm/octeon where most of the other Octeon register definitions live. This is a platform driver with the platform device for "mdio-octeon" being registered in the platform startup code. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-10-15 03:04:38 +08:00
help
net: mdio-octeon: Modify driver to work on both ThunderX and Octeon This patch modifies the mdio-octeon driver to work on both ThunderX and Octeon SoCs from Cavium Inc. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29 06:12:11 +08:00
This module provides a driver for the Octeon and ThunderX MDIO
phy: mdio-octeon: Refactor into two files/modules A follow-on patch uses PCI probing to find the Thunder MDIO hardware. In preparation for this, split out the common code into a new file mdio-cavium.c, which will be used by both the existing OCTEON driver, and the new Thunder PCI based driver. As part of the refactoring simplify the struct cavium_mdiobus by removing fields that are only ever used in the probe function and can just as well be local variables. Use readq/writeq in preference to readq_relaxed/writeq_relaxed as the relaxed form was an optimization for an early chip revision, and the MDIO drivers are not performance bottlenecks that need optimization in the first place. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-12 01:53:10 +08:00
buses. It is required by the Octeon and ThunderX ethernet device
drivers on some systems.
NET: Add driver for Octeon MDIO buses. The Octeon SOC has two types of Ethernet ports, each type with its own driver. However, the PHYs for all the ports are controlled by a common MDIO bus. Because the mdio driver is not associated with a particular driver, but is instead a system level resource, we create s stand-alone driver for it. As for the driver, we put the register definitions in arch/mips/include/asm/octeon where most of the other Octeon register definitions live. This is a platform driver with the platform device for "mdio-octeon" being registered in the platform startup code. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-10-15 03:04:38 +08:00
phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses. The Cavium Thunder SoCs have multiple MIDO buses that are part of a single PCI device. To model this in the device tree we call the PCI parent device a "cavium,thunder-8890-mdio-nexus", it has several children, one for each MDIO bus. The MDIO bus hardware is identical to that found in the OCTEON SoCs, so we use that code for things that are not part of the PCI driver probe/remove Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-12 01:53:11 +08:00
config MDIO_THUNDER
phy: mdio-thunder: Fix some Kconfig typos Drop two extra occurrences of "on" in option title and help text. Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-17 07:23:37 +08:00
tristate "Support for MDIO buses on ThunderX SOCs"
phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses. The Cavium Thunder SoCs have multiple MIDO buses that are part of a single PCI device. To model this in the device tree we call the PCI parent device a "cavium,thunder-8890-mdio-nexus", it has several children, one for each MDIO bus. The MDIO bus hardware is identical to that found in the OCTEON SoCs, so we use that code for things that are not part of the PCI driver probe/remove Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-12 01:53:11 +08:00
depends on 64BIT
depends on PCI
select MDIO_CAVIUM
help
This driver supports the MDIO interfaces found on Cavium
phy: mdio-thunder: Fix some Kconfig typos Drop two extra occurrences of "on" in option title and help text. Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-17 07:23:37 +08:00
ThunderX SoCs when the MDIO bus device appears as a PCI
phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses. The Cavium Thunder SoCs have multiple MIDO buses that are part of a single PCI device. To model this in the device tree we call the PCI parent device a "cavium,thunder-8890-mdio-nexus", it has several children, one for each MDIO bus. The MDIO bus hardware is identical to that found in the OCTEON SoCs, so we use that code for things that are not part of the PCI driver probe/remove Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-12 01:53:11 +08:00
device.
net: Add MDIO bus driver for the Allwinner EMAC This patch adds a separate driver for the MDIO interface of the Allwinner ethernet controllers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-30 11:49:21 +08:00
config MDIO_SUN4I
tristate "Allwinner sun4i MDIO interface support"
depends on ARCH_SUNXI
help
This driver supports the MDIO interface found in the network
interface units of the Allwinner SoC that have an EMAC (A10,
A12, A10s, etc.)
phy: Add MOXA MDIO driver The MOXA UC-711X hardware(s) has an ethernet controller that seem to be developed internally. The IC used is "RTL8201CP". This patch adds an MDIO driver which handles the MII bus. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 23:55:01 +08:00
config MDIO_MOXART
tristate "MOXA ART MDIO interface support"
depends on ARCH_MOXART
help
This driver supports the MDIO interface found in the network
interface units of the MOXA ART SoC
netdev/of/phy: Add MDIO bus multiplexer support. This patch adds a somewhat generic framework for MDIO bus multiplexers. It is modeled on the I2C multiplexer. The multiplexer is needed if there are multiple PHYs with the same address connected to the same MDIO bus adepter, or if there is insufficient electrical drive capability for all the connected PHY devices. Conceptually it could look something like this: ------------------ | Control Signal | --------+--------- | --------------- --------+------ | MDIO MASTER |---| Multiplexer | --------------- --+-------+---- | | C C h h i i l l d d | | --------- A B --------- | | | | | | | PHY@1 +-------+ +---+ PHY@1 | | | | | | | --------- | | --------- --------- | | --------- | | | | | | | PHY@2 +-------+ +---+ PHY@2 | | | | | --------- --------- This framework configures the bus topology from device tree data. The mechanics of switching the multiplexer is left to device specific drivers. The follow-on patch contains a multiplexer driven by GPIO lines. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-02 23:16:38 +08:00
config MDIO_BUS_MUX
tristate
depends on OF_MDIO
help
This module provides a driver framework for MDIO bus
multiplexers which connect one of several child MDIO busses
to a parent bus. Switching between child busses is done by
device specific drivers.
netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines. The GPIO pins select which sub bus is connected to the master. Initially tested with an sn74cbtlv3253 switch device wired into the MDIO bus. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-02 23:16:39 +08:00
config MDIO_BUS_MUX_GPIO
tristate "Support for GPIO controlled MDIO bus multiplexers"
depends on OF_GPIO && OF_MDIO
select MDIO_BUS_MUX
help
This module provides a driver for MDIO bus multiplexers that
are controlled via GPIO lines. The multiplexer connects one of
several child MDIO busses to a parent bus. Child bus
selection is under the control of GPIO lines.
netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device Add support for an MDIO bus multiplexer controlled by a simple memory-mapped device, like an FPGA. The device must be memory-mapped and contain only 8-bit registers (which keeps things simple). Tested on a Freescale P5020DS board which uses the "PIXIS" FPGA attached to the localbus. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-24 17:10:53 +08:00
config MDIO_BUS_MUX_MMIOREG
tristate "Support for MMIO device-controlled MDIO bus multiplexers"
net: phy: add dependency on HAS_IOMEM to MDIO_BUS_MUX_MMIOREG On UML builds, mdio-mux-mmioreg.c fails to compile: drivers/net/phy/mdio-mux-mmioreg.c:50:3: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] drivers/net/phy/mdio-mux-mmioreg.c:63:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] This is due to CONFIG_OF now being user selectable. Add a dependency on HAS_IOMEM to fix this. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 01:16:27 +08:00
depends on OF_MDIO && HAS_IOMEM
netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device Add support for an MDIO bus multiplexer controlled by a simple memory-mapped device, like an FPGA. The device must be memory-mapped and contain only 8-bit registers (which keeps things simple). Tested on a Freescale P5020DS board which uses the "PIXIS" FPGA attached to the localbus. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-24 17:10:53 +08:00
select MDIO_BUS_MUX
help
This module provides a driver for MDIO bus multiplexers that
are controlled via a simple memory-mapped device, like an FPGA.
The multiplexer connects one of several child MDIO busses to a
parent bus. Child bus selection is under the control of one of
the FPGA's registers.
Currently, only 8-bit registers are supported.
net: mdio-mux: Add MDIO mux driver for iProc SoCs iProc based SoCs supports the integrated mdio multiplexer which has the bus selection as well as mdio transaction generation logic inside. This multiplexer has child buses for PCIe, SATA, USB and ETH. These buses could be internal or external to SOC where PHYs are attached. These buses could use C-45 or C-22 mdio transaction. Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 13:33:49 +08:00
config MDIO_BUS_MUX_BCM_IPROC
tristate "Support for iProc based MDIO bus multiplexers"
depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
select MDIO_BUS_MUX
default ARCH_BCM_IPROC
help
This module provides a driver for MDIO bus multiplexers found in
iProc based Broadcom SoCs. This multiplexer connects one of several
child MDIO bus to a parent bus. Buses could be internal as well as
external and selection logic lies inside the same multiplexer.
net: phy: add generic UniMAC MDIO bus driver Add a generic UniMAC MDIO bus driver and its Device Tree binding, which can be used by the BCMGENET driver as-is, and the upcoming Starfighter 2 Ethernet switch MDIO bus controller. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 08:04:47 +08:00
config MDIO_BCM_UNIMAC
tristate "Broadcom UniMAC MDIO bus controller"
drivers/net/phy/Kconfig: Let MDIO_BCM_UNIMAC depend on HAS_IOMEM MDIO_BCM_UNIMAC needs HAS_IOMEM, so depend on it, the related error ( with allmodconfig under um): MODPOST 1205 modules ERROR: "devm_ioremap" [drivers/net/phy/mdio-bcm-unimac.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-04 17:54:33 +08:00
depends on HAS_IOMEM
net: phy: add generic UniMAC MDIO bus driver Add a generic UniMAC MDIO bus driver and its Device Tree binding, which can be used by the BCMGENET driver as-is, and the upcoming Starfighter 2 Ethernet switch MDIO bus controller. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 08:04:47 +08:00
help
This module provides a driver for the Broadcom UniMAC MDIO busses.
This hardware can be found in the Broadcom GENET Ethernet MAC
controllers as well as some Broadcom Ethernet switches such as the
Starfighter 2 switches.
net: phy: Broadcom iProc MDIO bus driver This patch adds support for the Broadcom iProc MDIO bus interface. The MDIO interface can be found in the Broadcom iProc family Soc's. The MDIO bus is accessed using a combination of command and data registers. This MDIO driver provides access to the Etherent GPHY's connected to the MDIO bus. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 03:25:47 +08:00
config MDIO_BCM_IPROC
tristate "Broadcom iProc MDIO bus controller"
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on HAS_IOMEM && OF_MDIO
help
This module provides a driver for the MDIO busses found in the
Broadcom iProc SoC's.
NET: PHY: adds driver for Intel XWAY PHY This adds support for the Intel (former Lantiq) XWAY 11G and 22E PHYs. These PHYs are also named PEF 7061, PEF 7071, PEF 7072. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-06 05:41:11 +08:00
config INTEL_XWAY_PHY
tristate "Driver for Intel XWAY PHYs"
---help---
Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
These PHYs are marked as standalone chips under the names
PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
Use menuconfig objects: PHY Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 13:52:55 +08:00
endif # PHYLIB
phy: Micrel KS8995MA 5-ports 10/100 managed Ethernet switch support added Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Frederic Lambert <frdrc66@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-18 15:33:41 +08:00
config MICREL_KS8995MA
tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
depends on SPI