linux_old1/drivers/cpufreq/cppc_cpufreq.c

257 lines
6.2 KiB
C
Raw Normal View History

/*
* CPPC (Collaborative Processor Performance Control) driver for
* interfacing with the CPUfreq layer and governors. See
* cppc_acpi.c for CPPC specific methods.
*
* (C) Copyright 2014, 2015 Linaro Ltd.
* Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2
* of the License.
*/
#define pr_fmt(fmt) "CPPC Cpufreq:" fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/cpu.h>
#include <linux/cpufreq.h>
cpufreq: CPPC: Force reporting values in KHz to fix user space interface When CPPC is being used by ACPI on arm64, user space tools such as cpupower report CPU frequency values from sysfs that are incorrect. What the driver was doing was reporting the values given by ACPI tables in whatever scale was used to provide them. However, the ACPI spec defines the CPPC values as unitless abstract numbers. Internal kernel structures such as struct perf_cap, in contrast, expect these values to be in KHz. When these struct values get reported via sysfs, the user space tools also assume they are in KHz, causing them to report incorrect values (for example, reporting a CPU frequency of 1MHz when it should be 1.8GHz). The downside is that this approach has some assumptions: (1) It relies on SMBIOS3 being used, *and* that the Max Frequency value for a processor is set to a non-zero value. (2) It assumes that all processors run at the same speed, or that the CPPC values have all been scaled to reflect relative speed. This patch retrieves the largest CPU Max Frequency from a type 4 DMI record that it can find. This may not be an issue, however, as a sampling of DMI data on x86 and arm64 indicates there is often only one such record regardless. Since CPPC is relatively new, it is unclear if the ACPI ASL will always be written to reflect any sort of relative performance of processors of differing speeds. (3) It assumes that performance and frequency both scale linearly. For arm64 servers, this may be sufficient, but it does rely on firmware values being set correctly. Hence, other approaches will be considered in the future. This has been tested on three arm64 servers, with and without DMI, with and without CPPC support. Signed-off-by: Al Stone <ahs3@redhat.com> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21 05:10:04 +08:00
#include <linux/dmi.h>
#include <linux/vmalloc.h>
cpufreq: CPPC: Force reporting values in KHz to fix user space interface When CPPC is being used by ACPI on arm64, user space tools such as cpupower report CPU frequency values from sysfs that are incorrect. What the driver was doing was reporting the values given by ACPI tables in whatever scale was used to provide them. However, the ACPI spec defines the CPPC values as unitless abstract numbers. Internal kernel structures such as struct perf_cap, in contrast, expect these values to be in KHz. When these struct values get reported via sysfs, the user space tools also assume they are in KHz, causing them to report incorrect values (for example, reporting a CPU frequency of 1MHz when it should be 1.8GHz). The downside is that this approach has some assumptions: (1) It relies on SMBIOS3 being used, *and* that the Max Frequency value for a processor is set to a non-zero value. (2) It assumes that all processors run at the same speed, or that the CPPC values have all been scaled to reflect relative speed. This patch retrieves the largest CPU Max Frequency from a type 4 DMI record that it can find. This may not be an issue, however, as a sampling of DMI data on x86 and arm64 indicates there is often only one such record regardless. Since CPPC is relatively new, it is unclear if the ACPI ASL will always be written to reflect any sort of relative performance of processors of differing speeds. (3) It assumes that performance and frequency both scale linearly. For arm64 servers, this may be sufficient, but it does rely on firmware values being set correctly. Hence, other approaches will be considered in the future. This has been tested on three arm64 servers, with and without DMI, with and without CPPC support. Signed-off-by: Al Stone <ahs3@redhat.com> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21 05:10:04 +08:00
#include <asm/unaligned.h>
#include <acpi/cppc_acpi.h>
cpufreq: CPPC: Force reporting values in KHz to fix user space interface When CPPC is being used by ACPI on arm64, user space tools such as cpupower report CPU frequency values from sysfs that are incorrect. What the driver was doing was reporting the values given by ACPI tables in whatever scale was used to provide them. However, the ACPI spec defines the CPPC values as unitless abstract numbers. Internal kernel structures such as struct perf_cap, in contrast, expect these values to be in KHz. When these struct values get reported via sysfs, the user space tools also assume they are in KHz, causing them to report incorrect values (for example, reporting a CPU frequency of 1MHz when it should be 1.8GHz). The downside is that this approach has some assumptions: (1) It relies on SMBIOS3 being used, *and* that the Max Frequency value for a processor is set to a non-zero value. (2) It assumes that all processors run at the same speed, or that the CPPC values have all been scaled to reflect relative speed. This patch retrieves the largest CPU Max Frequency from a type 4 DMI record that it can find. This may not be an issue, however, as a sampling of DMI data on x86 and arm64 indicates there is often only one such record regardless. Since CPPC is relatively new, it is unclear if the ACPI ASL will always be written to reflect any sort of relative performance of processors of differing speeds. (3) It assumes that performance and frequency both scale linearly. For arm64 servers, this may be sufficient, but it does rely on firmware values being set correctly. Hence, other approaches will be considered in the future. This has been tested on three arm64 servers, with and without DMI, with and without CPPC support. Signed-off-by: Al Stone <ahs3@redhat.com> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21 05:10:04 +08:00
/* Minimum struct length needed for the DMI processor entry we want */
#define DMI_ENTRY_PROCESSOR_MIN_LENGTH 48
/* Offest in the DMI processor structure for the max frequency */
#define DMI_PROCESSOR_MAX_SPEED 0x14
/*
* These structs contain information parsed from per CPU
* ACPI _CPC structures.
* e.g. For each CPU the highest, lowest supported
* performance capabilities, desired performance level
* requested etc.
*/
static struct cppc_cpudata **all_cpu_data;
cpufreq: CPPC: Force reporting values in KHz to fix user space interface When CPPC is being used by ACPI on arm64, user space tools such as cpupower report CPU frequency values from sysfs that are incorrect. What the driver was doing was reporting the values given by ACPI tables in whatever scale was used to provide them. However, the ACPI spec defines the CPPC values as unitless abstract numbers. Internal kernel structures such as struct perf_cap, in contrast, expect these values to be in KHz. When these struct values get reported via sysfs, the user space tools also assume they are in KHz, causing them to report incorrect values (for example, reporting a CPU frequency of 1MHz when it should be 1.8GHz). The downside is that this approach has some assumptions: (1) It relies on SMBIOS3 being used, *and* that the Max Frequency value for a processor is set to a non-zero value. (2) It assumes that all processors run at the same speed, or that the CPPC values have all been scaled to reflect relative speed. This patch retrieves the largest CPU Max Frequency from a type 4 DMI record that it can find. This may not be an issue, however, as a sampling of DMI data on x86 and arm64 indicates there is often only one such record regardless. Since CPPC is relatively new, it is unclear if the ACPI ASL will always be written to reflect any sort of relative performance of processors of differing speeds. (3) It assumes that performance and frequency both scale linearly. For arm64 servers, this may be sufficient, but it does rely on firmware values being set correctly. Hence, other approaches will be considered in the future. This has been tested on three arm64 servers, with and without DMI, with and without CPPC support. Signed-off-by: Al Stone <ahs3@redhat.com> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21 05:10:04 +08:00
/* Capture the max KHz from DMI */
static u64 cppc_dmi_max_khz;
/* Callback function used to retrieve the max frequency from DMI */
static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
{
const u8 *dmi_data = (const u8 *)dm;
u16 *mhz = (u16 *)private;
if (dm->type == DMI_ENTRY_PROCESSOR &&
dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) {
u16 val = (u16)get_unaligned((const u16 *)
(dmi_data + DMI_PROCESSOR_MAX_SPEED));
*mhz = val > *mhz ? val : *mhz;
}
}
/* Look up the max frequency in DMI */
static u64 cppc_get_dmi_max_khz(void)
{
u16 mhz = 0;
dmi_walk(cppc_find_dmi_mhz, &mhz);
/*
* Real stupid fallback value, just in case there is no
* actual value set.
*/
mhz = mhz ? mhz : 1;
return (1000 * mhz);
}
static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
struct cppc_cpudata *cpu;
struct cpufreq_freqs freqs;
u32 desired_perf;
int ret = 0;
cpu = all_cpu_data[policy->cpu];
desired_perf = (u64)target_freq * cpu->perf_caps.highest_perf / cppc_dmi_max_khz;
/* Return if it is exactly the same perf */
if (desired_perf == cpu->perf_ctrls.desired_perf)
return ret;
cpu->perf_ctrls.desired_perf = desired_perf;
freqs.old = policy->cur;
freqs.new = target_freq;
cpufreq_freq_transition_begin(policy, &freqs);
ret = cppc_set_perf(cpu->cpu, &cpu->perf_ctrls);
cpufreq_freq_transition_end(policy, &freqs, ret != 0);
if (ret)
pr_debug("Failed to set target on CPU:%d. ret:%d\n",
cpu->cpu, ret);
return ret;
}
static int cppc_verify_policy(struct cpufreq_policy *policy)
{
cpufreq_verify_within_cpu_limits(policy);
return 0;
}
static void cppc_cpufreq_stop_cpu(struct cpufreq_policy *policy)
{
int cpu_num = policy->cpu;
struct cppc_cpudata *cpu = all_cpu_data[cpu_num];
int ret;
cpu->perf_ctrls.desired_perf = cpu->perf_caps.lowest_perf;
ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls);
if (ret)
pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n",
cpu->perf_caps.lowest_perf, cpu_num, ret);
}
static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
struct cppc_cpudata *cpu;
unsigned int cpu_num = policy->cpu;
int ret = 0;
cpu = all_cpu_data[policy->cpu];
cpu->cpu = cpu_num;
ret = cppc_get_perf_caps(policy->cpu, &cpu->perf_caps);
if (ret) {
pr_debug("Err reading CPU%d perf capabilities. ret:%d\n",
cpu_num, ret);
return ret;
}
cpufreq: CPPC: Force reporting values in KHz to fix user space interface When CPPC is being used by ACPI on arm64, user space tools such as cpupower report CPU frequency values from sysfs that are incorrect. What the driver was doing was reporting the values given by ACPI tables in whatever scale was used to provide them. However, the ACPI spec defines the CPPC values as unitless abstract numbers. Internal kernel structures such as struct perf_cap, in contrast, expect these values to be in KHz. When these struct values get reported via sysfs, the user space tools also assume they are in KHz, causing them to report incorrect values (for example, reporting a CPU frequency of 1MHz when it should be 1.8GHz). The downside is that this approach has some assumptions: (1) It relies on SMBIOS3 being used, *and* that the Max Frequency value for a processor is set to a non-zero value. (2) It assumes that all processors run at the same speed, or that the CPPC values have all been scaled to reflect relative speed. This patch retrieves the largest CPU Max Frequency from a type 4 DMI record that it can find. This may not be an issue, however, as a sampling of DMI data on x86 and arm64 indicates there is often only one such record regardless. Since CPPC is relatively new, it is unclear if the ACPI ASL will always be written to reflect any sort of relative performance of processors of differing speeds. (3) It assumes that performance and frequency both scale linearly. For arm64 servers, this may be sufficient, but it does rely on firmware values being set correctly. Hence, other approaches will be considered in the future. This has been tested on three arm64 servers, with and without DMI, with and without CPPC support. Signed-off-by: Al Stone <ahs3@redhat.com> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21 05:10:04 +08:00
cppc_dmi_max_khz = cppc_get_dmi_max_khz();
policy->min = cpu->perf_caps.lowest_perf * cppc_dmi_max_khz / cpu->perf_caps.highest_perf;
policy->max = cppc_dmi_max_khz;
policy->cpuinfo.min_freq = policy->min;
policy->cpuinfo.max_freq = policy->max;
policy->cpuinfo.transition_latency = cppc_get_transition_latency(cpu_num);
policy->shared_type = cpu->shared_type;
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
cpumask_copy(policy->cpus, cpu->shared_cpu_map);
else if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL) {
/* Support only SW_ANY for now. */
pr_debug("Unsupported CPU co-ord type\n");
return -EFAULT;
}
cpumask_set_cpu(policy->cpu, policy->cpus);
cpu->cur_policy = policy;
/* Set policy->cur to max now. The governors will adjust later. */
cpufreq: CPPC: Force reporting values in KHz to fix user space interface When CPPC is being used by ACPI on arm64, user space tools such as cpupower report CPU frequency values from sysfs that are incorrect. What the driver was doing was reporting the values given by ACPI tables in whatever scale was used to provide them. However, the ACPI spec defines the CPPC values as unitless abstract numbers. Internal kernel structures such as struct perf_cap, in contrast, expect these values to be in KHz. When these struct values get reported via sysfs, the user space tools also assume they are in KHz, causing them to report incorrect values (for example, reporting a CPU frequency of 1MHz when it should be 1.8GHz). The downside is that this approach has some assumptions: (1) It relies on SMBIOS3 being used, *and* that the Max Frequency value for a processor is set to a non-zero value. (2) It assumes that all processors run at the same speed, or that the CPPC values have all been scaled to reflect relative speed. This patch retrieves the largest CPU Max Frequency from a type 4 DMI record that it can find. This may not be an issue, however, as a sampling of DMI data on x86 and arm64 indicates there is often only one such record regardless. Since CPPC is relatively new, it is unclear if the ACPI ASL will always be written to reflect any sort of relative performance of processors of differing speeds. (3) It assumes that performance and frequency both scale linearly. For arm64 servers, this may be sufficient, but it does rely on firmware values being set correctly. Hence, other approaches will be considered in the future. This has been tested on three arm64 servers, with and without DMI, with and without CPPC support. Signed-off-by: Al Stone <ahs3@redhat.com> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21 05:10:04 +08:00
policy->cur = cppc_dmi_max_khz;
cpu->perf_ctrls.desired_perf = cpu->perf_caps.highest_perf;
ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls);
if (ret)
pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n",
cpu->perf_caps.highest_perf, cpu_num, ret);
return ret;
}
static struct cpufreq_driver cppc_cpufreq_driver = {
.flags = CPUFREQ_CONST_LOOPS,
.verify = cppc_verify_policy,
.target = cppc_cpufreq_set_target,
.init = cppc_cpufreq_cpu_init,
.stop_cpu = cppc_cpufreq_stop_cpu,
.name = "cppc_cpufreq",
};
static int __init cppc_cpufreq_init(void)
{
int i, ret = 0;
struct cppc_cpudata *cpu;
if (acpi_disabled)
return -ENODEV;
all_cpu_data = kzalloc(sizeof(void *) * num_possible_cpus(), GFP_KERNEL);
if (!all_cpu_data)
return -ENOMEM;
for_each_possible_cpu(i) {
all_cpu_data[i] = kzalloc(sizeof(struct cppc_cpudata), GFP_KERNEL);
if (!all_cpu_data[i])
goto out;
cpu = all_cpu_data[i];
if (!zalloc_cpumask_var(&cpu->shared_cpu_map, GFP_KERNEL))
goto out;
}
ret = acpi_get_psd_map(all_cpu_data);
if (ret) {
pr_debug("Error parsing PSD data. Aborting cpufreq registration.\n");
goto out;
}
ret = cpufreq_register_driver(&cppc_cpufreq_driver);
if (ret)
goto out;
return ret;
out:
for_each_possible_cpu(i)
kfree(all_cpu_data[i]);
kfree(all_cpu_data);
return -ENODEV;
}
static void __exit cppc_cpufreq_exit(void)
{
struct cppc_cpudata *cpu;
int i;
cpufreq_unregister_driver(&cppc_cpufreq_driver);
for_each_possible_cpu(i) {
cpu = all_cpu_data[i];
free_cpumask_var(cpu->shared_cpu_map);
kfree(cpu);
}
kfree(all_cpu_data);
}
module_exit(cppc_cpufreq_exit);
MODULE_AUTHOR("Ashwin Chaugule");
MODULE_DESCRIPTION("CPUFreq driver based on the ACPI CPPC v5.0+ spec");
MODULE_LICENSE("GPL");
late_initcall(cppc_cpufreq_init);
static const struct acpi_device_id cppc_acpi_ids[] = {
{ACPI_PROCESSOR_DEVICE_HID, },
{}
};
MODULE_DEVICE_TABLE(acpi, cppc_acpi_ids);