linux_old1/fs/ntfs/aops.c

1643 lines
48 KiB
C
Raw Normal View History

/**
* aops.c - NTFS kernel address space operations and page cache handling.
* Part of the Linux-NTFS project.
*
* Copyright (c) 2001-2007 Anton Altaparmakov
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published
* by the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program/include file is distributed in the hope that it will be
* useful, but WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program (in the main directory of the Linux-NTFS
* distribution in the file COPYING); if not, write to the Free Software
* Foundation,Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/errno.h>
#include <linux/fs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/swap.h>
#include <linux/buffer_head.h>
#include <linux/writeback.h>
#include <linux/bit_spinlock.h>
#include "aops.h"
#include "attrib.h"
#include "debug.h"
#include "inode.h"
#include "mft.h"
#include "runlist.h"
#include "types.h"
#include "ntfs.h"
/**
* ntfs_end_buffer_async_read - async io completion for reading attributes
* @bh: buffer head on which io is completed
* @uptodate: whether @bh is now uptodate or not
*
* Asynchronous I/O completion handler for reading pages belonging to the
* attribute address space of an inode. The inodes can either be files or
* directories or they can be fake inodes describing some attribute.
*
* If NInoMstProtected(), perform the post read mst fixups when all IO on the
* page has been completed and mark the page uptodate or set the error bit on
* the page. To determine the size of the records that need fixing up, we
* cheat a little bit by setting the index_block_size in ntfs_inode to the ntfs
* record size, and index_block_size_bits, to the log(base 2) of the ntfs
* record size.
*/
static void ntfs_end_buffer_async_read(struct buffer_head *bh, int uptodate)
{
unsigned long flags;
struct buffer_head *first, *tmp;
struct page *page;
struct inode *vi;
ntfs_inode *ni;
int page_uptodate = 1;
page = bh->b_page;
vi = page->mapping->host;
ni = NTFS_I(vi);
if (likely(uptodate)) {
loff_t i_size;
s64 file_ofs, init_size;
set_buffer_uptodate(bh);
file_ofs = ((s64)page->index << PAGE_CACHE_SHIFT) +
bh_offset(bh);
read_lock_irqsave(&ni->size_lock, flags);
init_size = ni->initialized_size;
i_size = i_size_read(vi);
read_unlock_irqrestore(&ni->size_lock, flags);
if (unlikely(init_size > i_size)) {
/* Race with shrinking truncate. */
init_size = i_size;
}
/* Check for the current buffer head overflowing. */
if (unlikely(file_ofs + bh->b_size > init_size)) {
int ofs;
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:29 +08:00
void *kaddr;
ofs = 0;
if (file_ofs < init_size)
ofs = init_size - file_ofs;
local_irq_save(flags);
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:29 +08:00
kaddr = kmap_atomic(page, KM_BIO_SRC_IRQ);
memset(kaddr + bh_offset(bh) + ofs, 0,
bh->b_size - ofs);
flush_dcache_page(page);
kunmap_atomic(kaddr, KM_BIO_SRC_IRQ);
local_irq_restore(flags);
}
} else {
clear_buffer_uptodate(bh);
SetPageError(page);
ntfs_error(ni->vol->sb, "Buffer I/O error, logical block "
"0x%llx.", (unsigned long long)bh->b_blocknr);
}
first = page_buffers(page);
local_irq_save(flags);
bit_spin_lock(BH_Uptodate_Lock, &first->b_state);
clear_buffer_async_read(bh);
unlock_buffer(bh);
tmp = bh;
do {
if (!buffer_uptodate(tmp))
page_uptodate = 0;
if (buffer_async_read(tmp)) {
if (likely(buffer_locked(tmp)))
goto still_busy;
/* Async buffers must be locked. */
BUG();
}
tmp = tmp->b_this_page;
} while (tmp != bh);
bit_spin_unlock(BH_Uptodate_Lock, &first->b_state);
local_irq_restore(flags);
/*
* If none of the buffers had errors then we can set the page uptodate,
* but we first have to perform the post read mst fixups, if the
* attribute is mst protected, i.e. if NInoMstProteced(ni) is true.
* Note we ignore fixup errors as those are detected when
* map_mft_record() is called which gives us per record granularity
* rather than per page granularity.
*/
if (!NInoMstProtected(ni)) {
if (likely(page_uptodate && !PageError(page)))
SetPageUptodate(page);
} else {
u8 *kaddr;
unsigned int i, recs;
u32 rec_size;
rec_size = ni->itype.index.block_size;
recs = PAGE_CACHE_SIZE / rec_size;
/* Should have been verified before we got here... */
BUG_ON(!recs);
local_irq_save(flags);
kaddr = kmap_atomic(page, KM_BIO_SRC_IRQ);
for (i = 0; i < recs; i++)
post_read_mst_fixup((NTFS_RECORD*)(kaddr +
i * rec_size), rec_size);
kunmap_atomic(kaddr, KM_BIO_SRC_IRQ);
local_irq_restore(flags);
flush_dcache_page(page);
if (likely(page_uptodate && !PageError(page)))
SetPageUptodate(page);
}
unlock_page(page);
return;
still_busy:
bit_spin_unlock(BH_Uptodate_Lock, &first->b_state);
local_irq_restore(flags);
return;
}
/**
* ntfs_read_block - fill a @page of an address space with data
* @page: page cache page to fill with data
*
* Fill the page @page of the address space belonging to the @page->host inode.
* We read each buffer asynchronously and when all buffers are read in, our io
* completion handler ntfs_end_buffer_read_async(), if required, automatically
* applies the mst fixups to the page before finally marking it uptodate and
* unlocking it.
*
* We only enforce allocated_size limit because i_size is checked for in
* generic_file_read().
*
* Return 0 on success and -errno on error.
*
* Contains an adapted version of fs/buffer.c::block_read_full_page().
*/
static int ntfs_read_block(struct page *page)
{
loff_t i_size;
VCN vcn;
LCN lcn;
s64 init_size;
struct inode *vi;
ntfs_inode *ni;
ntfs_volume *vol;
runlist_element *rl;
struct buffer_head *bh, *head, *arr[MAX_BUF_PER_PAGE];
sector_t iblock, lblock, zblock;
unsigned long flags;
unsigned int blocksize, vcn_ofs;
int i, nr;
unsigned char blocksize_bits;
vi = page->mapping->host;
ni = NTFS_I(vi);
vol = ni->vol;
/* $MFT/$DATA must have its complete runlist in memory at all times. */
BUG_ON(!ni->runlist.rl && !ni->mft_no && !NInoAttr(ni));
blocksize = vol->sb->s_blocksize;
blocksize_bits = vol->sb->s_blocksize_bits;
if (!page_has_buffers(page)) {
create_empty_buffers(page, blocksize, 0);
if (unlikely(!page_has_buffers(page))) {
unlock_page(page);
return -ENOMEM;
}
}
bh = head = page_buffers(page);
BUG_ON(!bh);
/*
* We may be racing with truncate. To avoid some of the problems we
* now take a snapshot of the various sizes and use those for the whole
* of the function. In case of an extending truncate it just means we
* may leave some buffers unmapped which are now allocated. This is
* not a problem since these buffers will just get mapped when a write
* occurs. In case of a shrinking truncate, we will detect this later
* on due to the runlist being incomplete and if the page is being
* fully truncated, truncate will throw it away as soon as we unlock
* it so no need to worry what we do with it.
*/
iblock = (s64)page->index << (PAGE_CACHE_SHIFT - blocksize_bits);
read_lock_irqsave(&ni->size_lock, flags);
lblock = (ni->allocated_size + blocksize - 1) >> blocksize_bits;
init_size = ni->initialized_size;
i_size = i_size_read(vi);
read_unlock_irqrestore(&ni->size_lock, flags);
if (unlikely(init_size > i_size)) {
/* Race with shrinking truncate. */
init_size = i_size;
}
zblock = (init_size + blocksize - 1) >> blocksize_bits;
/* Loop through all the buffers in the page. */
rl = NULL;
nr = i = 0;
do {
int err = 0;
if (unlikely(buffer_uptodate(bh)))
continue;
if (unlikely(buffer_mapped(bh))) {
arr[nr++] = bh;
continue;
}
bh->b_bdev = vol->sb->s_bdev;
/* Is the block within the allowed limits? */
if (iblock < lblock) {
bool is_retry = false;
/* Convert iblock into corresponding vcn and offset. */
vcn = (VCN)iblock << blocksize_bits >>
vol->cluster_size_bits;
vcn_ofs = ((VCN)iblock << blocksize_bits) &
vol->cluster_size_mask;
if (!rl) {
lock_retry_remap:
down_read(&ni->runlist.lock);
rl = ni->runlist.rl;
}
if (likely(rl != NULL)) {
/* Seek to element containing target vcn. */
while (rl->length && rl[1].vcn <= vcn)
rl++;
lcn = ntfs_rl_vcn_to_lcn(rl, vcn);
} else
lcn = LCN_RL_NOT_MAPPED;
/* Successful remap. */
if (lcn >= 0) {
/* Setup buffer head to correct block. */
bh->b_blocknr = ((lcn << vol->cluster_size_bits)
+ vcn_ofs) >> blocksize_bits;
set_buffer_mapped(bh);
/* Only read initialized data blocks. */
if (iblock < zblock) {
arr[nr++] = bh;
continue;
}
/* Fully non-initialized data block, zero it. */
goto handle_zblock;
}
/* It is a hole, need to zero it. */
if (lcn == LCN_HOLE)
goto handle_hole;
/* If first try and runlist unmapped, map and retry. */
if (!is_retry && lcn == LCN_RL_NOT_MAPPED) {
is_retry = true;
/*
* Attempt to map runlist, dropping lock for
* the duration.
*/
up_read(&ni->runlist.lock);
err = ntfs_map_runlist(ni, vcn);
if (likely(!err))
goto lock_retry_remap;
rl = NULL;
} else if (!rl)
up_read(&ni->runlist.lock);
/*
* If buffer is outside the runlist, treat it as a
* hole. This can happen due to concurrent truncate
* for example.
*/
if (err == -ENOENT || lcn == LCN_ENOENT) {
err = 0;
goto handle_hole;
}
/* Hard error, zero out region. */
if (!err)
err = -EIO;
bh->b_blocknr = -1;
SetPageError(page);
ntfs_error(vol->sb, "Failed to read from inode 0x%lx, "
"attribute type 0x%x, vcn 0x%llx, "
"offset 0x%x because its location on "
"disk could not be determined%s "
"(error code %i).", ni->mft_no,
ni->type, (unsigned long long)vcn,
vcn_ofs, is_retry ? " even after "
"retrying" : "", err);
}
/*
* Either iblock was outside lblock limits or
* ntfs_rl_vcn_to_lcn() returned error. Just zero that portion
* of the page and set the buffer uptodate.
*/
handle_hole:
bh->b_blocknr = -1UL;
clear_buffer_mapped(bh);
handle_zblock:
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:29 +08:00
zero_user(page, i * blocksize, blocksize);
if (likely(!err))
set_buffer_uptodate(bh);
} while (i++, iblock++, (bh = bh->b_this_page) != head);
/* Release the lock if we took it. */
if (rl)
up_read(&ni->runlist.lock);
/* Check we have at least one buffer ready for i/o. */
if (nr) {
struct buffer_head *tbh;
/* Lock the buffers. */
for (i = 0; i < nr; i++) {
tbh = arr[i];
lock_buffer(tbh);
tbh->b_end_io = ntfs_end_buffer_async_read;
set_buffer_async_read(tbh);
}
/* Finally, start i/o on the buffers. */
for (i = 0; i < nr; i++) {
tbh = arr[i];
if (likely(!buffer_uptodate(tbh)))
submit_bh(READ, tbh);
else
ntfs_end_buffer_async_read(tbh, 1);
}
return 0;
}
/* No i/o was scheduled on any of the buffers. */
if (likely(!PageError(page)))
SetPageUptodate(page);
else /* Signal synchronous i/o error. */
nr = -EIO;
unlock_page(page);
return nr;
}
/**
* ntfs_readpage - fill a @page of a @file with data from the device
* @file: open file to which the page @page belongs or NULL
* @page: page cache page to fill with data
*
* For non-resident attributes, ntfs_readpage() fills the @page of the open
* file @file by calling the ntfs version of the generic block_read_full_page()
* function, ntfs_read_block(), which in turn creates and reads in the buffers
* associated with the page asynchronously.
*
* For resident attributes, OTOH, ntfs_readpage() fills @page by copying the
* data from the mft record (which at this stage is most likely in memory) and
* fills the remainder with zeroes. Thus, in this case, I/O is synchronous, as
* even if the mft record is not cached at this point in time, we need to wait
* for it to be read in before we can do the copy.
*
* Return 0 on success and -errno on error.
*/
static int ntfs_readpage(struct file *file, struct page *page)
{
loff_t i_size;
struct inode *vi;
ntfs_inode *ni, *base_ni;
u8 *addr;
ntfs_attr_search_ctx *ctx;
MFT_RECORD *mrec;
unsigned long flags;
u32 attr_len;
int err = 0;
retry_readpage:
BUG_ON(!PageLocked(page));
vi = page->mapping->host;
i_size = i_size_read(vi);
/* Is the page fully outside i_size? (truncate in progress) */
if (unlikely(page->index >= (i_size + PAGE_CACHE_SIZE - 1) >>
PAGE_CACHE_SHIFT)) {
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:29 +08:00
zero_user(page, 0, PAGE_CACHE_SIZE);
ntfs_debug("Read outside i_size - truncated?");
goto done;
}
/*
* This can potentially happen because we clear PageUptodate() during
* ntfs_writepage() of MstProtected() attributes.
*/
if (PageUptodate(page)) {
unlock_page(page);
return 0;
}
ni = NTFS_I(vi);
/*
* Only $DATA attributes can be encrypted and only unnamed $DATA
* attributes can be compressed. Index root can have the flags set but
* this means to create compressed/encrypted files, not that the
* attribute is compressed/encrypted. Note we need to check for
* AT_INDEX_ALLOCATION since this is the type of both directory and
* index inodes.
*/
if (ni->type != AT_INDEX_ALLOCATION) {
/* If attribute is encrypted, deny access, just like NT4. */
if (NInoEncrypted(ni)) {
BUG_ON(ni->type != AT_DATA);
err = -EACCES;
goto err_out;
}
/* Compressed data streams are handled in compress.c. */
if (NInoNonResident(ni) && NInoCompressed(ni)) {
BUG_ON(ni->type != AT_DATA);
BUG_ON(ni->name_len);
return ntfs_read_compressed_block(page);
}
}
/* NInoNonResident() == NInoIndexAllocPresent() */
if (NInoNonResident(ni)) {
/* Normal, non-resident data stream. */
return ntfs_read_block(page);
}
/*
* Attribute is resident, implying it is not compressed or encrypted.
* This also means the attribute is smaller than an mft record and
* hence smaller than a page, so can simply zero out any pages with
* index above 0. Note the attribute can actually be marked compressed
* but if it is resident the actual data is not compressed so we are
* ok to ignore the compressed flag here.
*/
if (unlikely(page->index > 0)) {
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:29 +08:00
zero_user(page, 0, PAGE_CACHE_SIZE);
goto done;
}
if (!NInoAttr(ni))
base_ni = ni;
else
base_ni = ni->ext.base_ntfs_ino;
/* Map, pin, and lock the mft record. */
mrec = map_mft_record(base_ni);
if (IS_ERR(mrec)) {
err = PTR_ERR(mrec);
goto err_out;
}
/*
* If a parallel write made the attribute non-resident, drop the mft
* record and retry the readpage.
*/
if (unlikely(NInoNonResident(ni))) {
unmap_mft_record(base_ni);
goto retry_readpage;
}
ctx = ntfs_attr_get_search_ctx(base_ni, mrec);
if (unlikely(!ctx)) {
err = -ENOMEM;
goto unm_err_out;
}
err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
CASE_SENSITIVE, 0, NULL, 0, ctx);
if (unlikely(err))
goto put_unm_err_out;
attr_len = le32_to_cpu(ctx->attr->data.resident.value_length);
read_lock_irqsave(&ni->size_lock, flags);
if (unlikely(attr_len > ni->initialized_size))
attr_len = ni->initialized_size;
i_size = i_size_read(vi);
read_unlock_irqrestore(&ni->size_lock, flags);
if (unlikely(attr_len > i_size)) {
/* Race with shrinking truncate. */
attr_len = i_size;
}
addr = kmap_atomic(page, KM_USER0);
/* Copy the data to the page. */
memcpy(addr, (u8*)ctx->attr +
le16_to_cpu(ctx->attr->data.resident.value_offset),
attr_len);
/* Zero the remainder of the page. */
memset(addr + attr_len, 0, PAGE_CACHE_SIZE - attr_len);
flush_dcache_page(page);
kunmap_atomic(addr, KM_USER0);
put_unm_err_out:
ntfs_attr_put_search_ctx(ctx);
unm_err_out:
unmap_mft_record(base_ni);
done:
SetPageUptodate(page);
err_out:
unlock_page(page);
return err;
}
#ifdef NTFS_RW
/**
* ntfs_write_block - write a @page to the backing store
* @page: page cache page to write out
* @wbc: writeback control structure
*
* This function is for writing pages belonging to non-resident, non-mst
* protected attributes to their backing store.
*
* For a page with buffers, map and write the dirty buffers asynchronously
* under page writeback. For a page without buffers, create buffers for the
* page, then proceed as above.
*
* If a page doesn't have buffers the page dirty state is definitive. If a page
* does have buffers, the page dirty state is just a hint, and the buffer dirty
* state is definitive. (A hint which has rules: dirty buffers against a clean
* page is illegal. Other combinations are legal and need to be handled. In
* particular a dirty page containing clean buffers for example.)
*
* Return 0 on success and -errno on error.
*
* Based on ntfs_read_block() and __block_write_full_page().
*/
static int ntfs_write_block(struct page *page, struct writeback_control *wbc)
{
VCN vcn;
LCN lcn;
s64 initialized_size;
loff_t i_size;
sector_t block, dblock, iblock;
struct inode *vi;
ntfs_inode *ni;
ntfs_volume *vol;
runlist_element *rl;
struct buffer_head *bh, *head;
unsigned long flags;
unsigned int blocksize, vcn_ofs;
int err;
bool need_end_writeback;
unsigned char blocksize_bits;
vi = page->mapping->host;
ni = NTFS_I(vi);
vol = ni->vol;
ntfs_debug("Entering for inode 0x%lx, attribute type 0x%x, page index "
"0x%lx.", ni->mft_no, ni->type, page->index);
BUG_ON(!NInoNonResident(ni));
BUG_ON(NInoMstProtected(ni));
blocksize = vol->sb->s_blocksize;
blocksize_bits = vol->sb->s_blocksize_bits;
if (!page_has_buffers(page)) {
BUG_ON(!PageUptodate(page));
create_empty_buffers(page, blocksize,
(1 << BH_Uptodate) | (1 << BH_Dirty));
if (unlikely(!page_has_buffers(page))) {
ntfs_warning(vol->sb, "Error allocating page "
"buffers. Redirtying page so we try "
"again later.");
/*
* Put the page back on mapping->dirty_pages, but leave
* its buffers' dirty state as-is.
*/
redirty_page_for_writepage(wbc, page);
unlock_page(page);
return 0;
}
}
bh = head = page_buffers(page);
BUG_ON(!bh);
/* NOTE: Different naming scheme to ntfs_read_block()! */
/* The first block in the page. */
block = (s64)page->index << (PAGE_CACHE_SHIFT - blocksize_bits);
read_lock_irqsave(&ni->size_lock, flags);
i_size = i_size_read(vi);
initialized_size = ni->initialized_size;
read_unlock_irqrestore(&ni->size_lock, flags);
/* The first out of bounds block for the data size. */
dblock = (i_size + blocksize - 1) >> blocksize_bits;
/* The last (fully or partially) initialized block. */
iblock = initialized_size >> blocksize_bits;
/*
* Be very careful. We have no exclusion from __set_page_dirty_buffers
* here, and the (potentially unmapped) buffers may become dirty at
* any time. If a buffer becomes dirty here after we've inspected it
* then we just miss that fact, and the page stays dirty.
*
* Buffers outside i_size may be dirtied by __set_page_dirty_buffers;
* handle that here by just cleaning them.
*/
/*
* Loop through all the buffers in the page, mapping all the dirty
* buffers to disk addresses and handling any aliases from the
* underlying block device's mapping.
*/
rl = NULL;
err = 0;
do {
bool is_retry = false;
if (unlikely(block >= dblock)) {
/*
* Mapped buffers outside i_size will occur, because
* this page can be outside i_size when there is a
* truncate in progress. The contents of such buffers
* were zeroed by ntfs_writepage().
*
* FIXME: What about the small race window where
* ntfs_writepage() has not done any clearing because
* the page was within i_size but before we get here,
* vmtruncate() modifies i_size?
*/
clear_buffer_dirty(bh);
set_buffer_uptodate(bh);
continue;
}
/* Clean buffers are not written out, so no need to map them. */
if (!buffer_dirty(bh))
continue;
/* Make sure we have enough initialized size. */
if (unlikely((block >= iblock) &&
(initialized_size < i_size))) {
/*
* If this page is fully outside initialized size, zero
* out all pages between the current initialized size
* and the current page. Just use ntfs_readpage() to do
* the zeroing transparently.
*/
if (block > iblock) {
// TODO:
// For each page do:
// - read_cache_page()
// Again for each page do:
// - wait_on_page_locked()
// - Check (PageUptodate(page) &&
// !PageError(page))
// Update initialized size in the attribute and
// in the inode.
// Again, for each page do:
// __set_page_dirty_buffers();
// page_cache_release()
// We don't need to wait on the writes.
// Update iblock.
}
/*
* The current page straddles initialized size. Zero
* all non-uptodate buffers and set them uptodate (and
* dirty?). Note, there aren't any non-uptodate buffers
* if the page is uptodate.
* FIXME: For an uptodate page, the buffers may need to
* be written out because they were not initialized on
* disk before.
*/
if (!PageUptodate(page)) {
// TODO:
// Zero any non-uptodate buffers up to i_size.
// Set them uptodate and dirty.
}
// TODO:
// Update initialized size in the attribute and in the
// inode (up to i_size).
// Update iblock.
// FIXME: This is inefficient. Try to batch the two
// size changes to happen in one go.
ntfs_error(vol->sb, "Writing beyond initialized size "
"is not supported yet. Sorry.");
err = -EOPNOTSUPP;
break;
// Do NOT set_buffer_new() BUT DO clear buffer range
// outside write request range.
// set_buffer_uptodate() on complete buffers as well as
// set_buffer_dirty().
}
/* No need to map buffers that are already mapped. */
if (buffer_mapped(bh))
continue;
/* Unmapped, dirty buffer. Need to map it. */
bh->b_bdev = vol->sb->s_bdev;
/* Convert block into corresponding vcn and offset. */
vcn = (VCN)block << blocksize_bits;
vcn_ofs = vcn & vol->cluster_size_mask;
vcn >>= vol->cluster_size_bits;
if (!rl) {
lock_retry_remap:
down_read(&ni->runlist.lock);
rl = ni->runlist.rl;
}
if (likely(rl != NULL)) {
/* Seek to element containing target vcn. */
while (rl->length && rl[1].vcn <= vcn)
rl++;
lcn = ntfs_rl_vcn_to_lcn(rl, vcn);
} else
lcn = LCN_RL_NOT_MAPPED;
/* Successful remap. */
if (lcn >= 0) {
/* Setup buffer head to point to correct block. */
bh->b_blocknr = ((lcn << vol->cluster_size_bits) +
vcn_ofs) >> blocksize_bits;
set_buffer_mapped(bh);
continue;
}
/* It is a hole, need to instantiate it. */
if (lcn == LCN_HOLE) {
u8 *kaddr;
unsigned long *bpos, *bend;
/* Check if the buffer is zero. */
kaddr = kmap_atomic(page, KM_USER0);
bpos = (unsigned long *)(kaddr + bh_offset(bh));
bend = (unsigned long *)((u8*)bpos + blocksize);
do {
if (unlikely(*bpos))
break;
} while (likely(++bpos < bend));
kunmap_atomic(kaddr, KM_USER0);
if (bpos == bend) {
/*
* Buffer is zero and sparse, no need to write
* it.
*/
bh->b_blocknr = -1;
clear_buffer_dirty(bh);
continue;
}
// TODO: Instantiate the hole.
// clear_buffer_new(bh);
// unmap_underlying_metadata(bh->b_bdev, bh->b_blocknr);
ntfs_error(vol->sb, "Writing into sparse regions is "
"not supported yet. Sorry.");
err = -EOPNOTSUPP;
break;
}
/* If first try and runlist unmapped, map and retry. */
if (!is_retry && lcn == LCN_RL_NOT_MAPPED) {
is_retry = true;
/*
* Attempt to map runlist, dropping lock for
* the duration.
*/
up_read(&ni->runlist.lock);
err = ntfs_map_runlist(ni, vcn);
if (likely(!err))
goto lock_retry_remap;
rl = NULL;
} else if (!rl)
up_read(&ni->runlist.lock);
/*
* If buffer is outside the runlist, truncate has cut it out
* of the runlist. Just clean and clear the buffer and set it
* uptodate so it can get discarded by the VM.
*/
if (err == -ENOENT || lcn == LCN_ENOENT) {
bh->b_blocknr = -1;
clear_buffer_dirty(bh);
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:29 +08:00
zero_user(page, bh_offset(bh), blocksize);
set_buffer_uptodate(bh);
err = 0;
continue;
}
/* Failed to map the buffer, even after retrying. */
if (!err)
err = -EIO;
bh->b_blocknr = -1;
ntfs_error(vol->sb, "Failed to write to inode 0x%lx, "
"attribute type 0x%x, vcn 0x%llx, offset 0x%x "
"because its location on disk could not be "
"determined%s (error code %i).", ni->mft_no,
ni->type, (unsigned long long)vcn,
vcn_ofs, is_retry ? " even after "
"retrying" : "", err);
break;
} while (block++, (bh = bh->b_this_page) != head);
/* Release the lock if we took it. */
if (rl)
up_read(&ni->runlist.lock);
/* For the error case, need to reset bh to the beginning. */
bh = head;
/* Just an optimization, so ->readpage() is not called later. */
if (unlikely(!PageUptodate(page))) {
int uptodate = 1;
do {
if (!buffer_uptodate(bh)) {
uptodate = 0;
bh = head;
break;
}
} while ((bh = bh->b_this_page) != head);
if (uptodate)
SetPageUptodate(page);
}
/* Setup all mapped, dirty buffers for async write i/o. */
do {
if (buffer_mapped(bh) && buffer_dirty(bh)) {
lock_buffer(bh);
if (test_clear_buffer_dirty(bh)) {
BUG_ON(!buffer_uptodate(bh));
mark_buffer_async_write(bh);
} else
unlock_buffer(bh);
} else if (unlikely(err)) {
/*
* For the error case. The buffer may have been set
* dirty during attachment to a dirty page.
*/
if (err != -ENOMEM)
clear_buffer_dirty(bh);
}
} while ((bh = bh->b_this_page) != head);
if (unlikely(err)) {
// TODO: Remove the -EOPNOTSUPP check later on...
if (unlikely(err == -EOPNOTSUPP))
err = 0;
else if (err == -ENOMEM) {
ntfs_warning(vol->sb, "Error allocating memory. "
"Redirtying page so we try again "
"later.");
/*
* Put the page back on mapping->dirty_pages, but
* leave its buffer's dirty state as-is.
*/
redirty_page_for_writepage(wbc, page);
err = 0;
} else
SetPageError(page);
}
BUG_ON(PageWriteback(page));
set_page_writeback(page); /* Keeps try_to_free_buffers() away. */
/* Submit the prepared buffers for i/o. */
need_end_writeback = true;
do {
struct buffer_head *next = bh->b_this_page;
if (buffer_async_write(bh)) {
submit_bh(WRITE, bh);
need_end_writeback = false;
}
bh = next;
} while (bh != head);
unlock_page(page);
/* If no i/o was started, need to end_page_writeback(). */
if (unlikely(need_end_writeback))
end_page_writeback(page);
ntfs_debug("Done.");
return err;
}
/**
* ntfs_write_mst_block - write a @page to the backing store
* @page: page cache page to write out
* @wbc: writeback control structure
*
* This function is for writing pages belonging to non-resident, mst protected
* attributes to their backing store. The only supported attributes are index
* allocation and $MFT/$DATA. Both directory inodes and index inodes are
* supported for the index allocation case.
*
* The page must remain locked for the duration of the write because we apply
* the mst fixups, write, and then undo the fixups, so if we were to unlock the
* page before undoing the fixups, any other user of the page will see the
* page contents as corrupt.
*
* We clear the page uptodate flag for the duration of the function to ensure
* exclusion for the $MFT/$DATA case against someone mapping an mft record we
* are about to apply the mst fixups to.
*
* Return 0 on success and -errno on error.
*
* Based on ntfs_write_block(), ntfs_mft_writepage(), and
* write_mft_record_nolock().
*/
static int ntfs_write_mst_block(struct page *page,
struct writeback_control *wbc)
{
sector_t block, dblock, rec_block;
struct inode *vi = page->mapping->host;
ntfs_inode *ni = NTFS_I(vi);
ntfs_volume *vol = ni->vol;
u8 *kaddr;
unsigned int rec_size = ni->itype.index.block_size;
ntfs_inode *locked_nis[PAGE_CACHE_SIZE / rec_size];
struct buffer_head *bh, *head, *tbh, *rec_start_bh;
struct buffer_head *bhs[MAX_BUF_PER_PAGE];
runlist_element *rl;
int i, nr_locked_nis, nr_recs, nr_bhs, max_bhs, bhs_per_rec, err, err2;
unsigned bh_size, rec_size_bits;
bool sync, is_mft, page_is_dirty, rec_is_dirty;
unsigned char bh_size_bits;
ntfs_debug("Entering for inode 0x%lx, attribute type 0x%x, page index "
"0x%lx.", vi->i_ino, ni->type, page->index);
BUG_ON(!NInoNonResident(ni));
BUG_ON(!NInoMstProtected(ni));
is_mft = (S_ISREG(vi->i_mode) && !vi->i_ino);
/*
* NOTE: ntfs_write_mst_block() would be called for $MFTMirr if a page
* in its page cache were to be marked dirty. However this should
* never happen with the current driver and considering we do not
* handle this case here we do want to BUG(), at least for now.
*/
BUG_ON(!(is_mft || S_ISDIR(vi->i_mode) ||
(NInoAttr(ni) && ni->type == AT_INDEX_ALLOCATION)));
bh_size = vol->sb->s_blocksize;
bh_size_bits = vol->sb->s_blocksize_bits;
max_bhs = PAGE_CACHE_SIZE / bh_size;
BUG_ON(!max_bhs);
BUG_ON(max_bhs > MAX_BUF_PER_PAGE);
/* Were we called for sync purposes? */
sync = (wbc->sync_mode == WB_SYNC_ALL);
/* Make sure we have mapped buffers. */
bh = head = page_buffers(page);
BUG_ON(!bh);
rec_size_bits = ni->itype.index.block_size_bits;
BUG_ON(!(PAGE_CACHE_SIZE >> rec_size_bits));
bhs_per_rec = rec_size >> bh_size_bits;
BUG_ON(!bhs_per_rec);
/* The first block in the page. */
rec_block = block = (sector_t)page->index <<
(PAGE_CACHE_SHIFT - bh_size_bits);
/* The first out of bounds block for the data size. */
dblock = (i_size_read(vi) + bh_size - 1) >> bh_size_bits;
rl = NULL;
err = err2 = nr_bhs = nr_recs = nr_locked_nis = 0;
page_is_dirty = rec_is_dirty = false;
rec_start_bh = NULL;
do {
bool is_retry = false;
if (likely(block < rec_block)) {
if (unlikely(block >= dblock)) {
clear_buffer_dirty(bh);
set_buffer_uptodate(bh);
continue;
}
/*
* This block is not the first one in the record. We
* ignore the buffer's dirty state because we could
* have raced with a parallel mark_ntfs_record_dirty().
*/
if (!rec_is_dirty)
continue;
if (unlikely(err2)) {
if (err2 != -ENOMEM)
clear_buffer_dirty(bh);
continue;
}
} else /* if (block == rec_block) */ {
BUG_ON(block > rec_block);
/* This block is the first one in the record. */
rec_block += bhs_per_rec;
err2 = 0;
if (unlikely(block >= dblock)) {
clear_buffer_dirty(bh);
continue;
}
if (!buffer_dirty(bh)) {
/* Clean records are not written out. */
rec_is_dirty = false;
continue;
}
rec_is_dirty = true;
rec_start_bh = bh;
}
/* Need to map the buffer if it is not mapped already. */
if (unlikely(!buffer_mapped(bh))) {
VCN vcn;
LCN lcn;
unsigned int vcn_ofs;
bh->b_bdev = vol->sb->s_bdev;
/* Obtain the vcn and offset of the current block. */
vcn = (VCN)block << bh_size_bits;
vcn_ofs = vcn & vol->cluster_size_mask;
vcn >>= vol->cluster_size_bits;
if (!rl) {
lock_retry_remap:
down_read(&ni->runlist.lock);
rl = ni->runlist.rl;
}
if (likely(rl != NULL)) {
/* Seek to element containing target vcn. */
while (rl->length && rl[1].vcn <= vcn)
rl++;
lcn = ntfs_rl_vcn_to_lcn(rl, vcn);
} else
lcn = LCN_RL_NOT_MAPPED;
/* Successful remap. */
if (likely(lcn >= 0)) {
/* Setup buffer head to correct block. */
bh->b_blocknr = ((lcn <<
vol->cluster_size_bits) +
vcn_ofs) >> bh_size_bits;
set_buffer_mapped(bh);
} else {
/*
* Remap failed. Retry to map the runlist once
* unless we are working on $MFT which always
* has the whole of its runlist in memory.
*/
if (!is_mft && !is_retry &&
lcn == LCN_RL_NOT_MAPPED) {
is_retry = true;
/*
* Attempt to map runlist, dropping
* lock for the duration.
*/
up_read(&ni->runlist.lock);
err2 = ntfs_map_runlist(ni, vcn);
if (likely(!err2))
goto lock_retry_remap;
if (err2 == -ENOMEM)
page_is_dirty = true;
lcn = err2;
} else {
err2 = -EIO;
if (!rl)
up_read(&ni->runlist.lock);
}
/* Hard error. Abort writing this record. */
if (!err || err == -ENOMEM)
err = err2;
bh->b_blocknr = -1;
ntfs_error(vol->sb, "Cannot write ntfs record "
"0x%llx (inode 0x%lx, "
"attribute type 0x%x) because "
"its location on disk could "
"not be determined (error "
"code %lli).",
(long long)block <<
bh_size_bits >>
vol->mft_record_size_bits,
ni->mft_no, ni->type,
(long long)lcn);
/*
* If this is not the first buffer, remove the
* buffers in this record from the list of
* buffers to write and clear their dirty bit
* if not error -ENOMEM.
*/
if (rec_start_bh != bh) {
while (bhs[--nr_bhs] != rec_start_bh)
;
if (err2 != -ENOMEM) {
do {
clear_buffer_dirty(
rec_start_bh);
} while ((rec_start_bh =
rec_start_bh->
b_this_page) !=
bh);
}
}
continue;
}
}
BUG_ON(!buffer_uptodate(bh));
BUG_ON(nr_bhs >= max_bhs);
bhs[nr_bhs++] = bh;
} while (block++, (bh = bh->b_this_page) != head);
if (unlikely(rl))
up_read(&ni->runlist.lock);
/* If there were no dirty buffers, we are done. */
if (!nr_bhs)
goto done;
/* Map the page so we can access its contents. */
kaddr = kmap(page);
/* Clear the page uptodate flag whilst the mst fixups are applied. */
BUG_ON(!PageUptodate(page));
ClearPageUptodate(page);
for (i = 0; i < nr_bhs; i++) {
unsigned int ofs;
/* Skip buffers which are not at the beginning of records. */
if (i % bhs_per_rec)
continue;
tbh = bhs[i];
ofs = bh_offset(tbh);
if (is_mft) {
ntfs_inode *tni;
unsigned long mft_no;
/* Get the mft record number. */
mft_no = (((s64)page->index << PAGE_CACHE_SHIFT) + ofs)
>> rec_size_bits;
/* Check whether to write this mft record. */
tni = NULL;
if (!ntfs_may_write_mft_record(vol, mft_no,
(MFT_RECORD*)(kaddr + ofs), &tni)) {
/*
* The record should not be written. This
* means we need to redirty the page before
* returning.
*/
page_is_dirty = true;
/*
* Remove the buffers in this mft record from
* the list of buffers to write.
*/
do {
bhs[i] = NULL;
} while (++i % bhs_per_rec);
continue;
}
/*
* The record should be written. If a locked ntfs
* inode was returned, add it to the array of locked
* ntfs inodes.
*/
if (tni)
locked_nis[nr_locked_nis++] = tni;
}
/* Apply the mst protection fixups. */
err2 = pre_write_mst_fixup((NTFS_RECORD*)(kaddr + ofs),
rec_size);
if (unlikely(err2)) {
if (!err || err == -ENOMEM)
err = -EIO;
ntfs_error(vol->sb, "Failed to apply mst fixups "
"(inode 0x%lx, attribute type 0x%x, "
"page index 0x%lx, page offset 0x%x)!"
" Unmount and run chkdsk.", vi->i_ino,
ni->type, page->index, ofs);
/*
* Mark all the buffers in this record clean as we do
* not want to write corrupt data to disk.
*/
do {
clear_buffer_dirty(bhs[i]);
bhs[i] = NULL;
} while (++i % bhs_per_rec);
continue;
}
nr_recs++;
}
/* If no records are to be written out, we are done. */
if (!nr_recs)
goto unm_done;
flush_dcache_page(page);
/* Lock buffers and start synchronous write i/o on them. */
for (i = 0; i < nr_bhs; i++) {
tbh = bhs[i];
if (!tbh)
continue;
if (!trylock_buffer(tbh))
BUG();
/* The buffer dirty state is now irrelevant, just clean it. */
clear_buffer_dirty(tbh);
BUG_ON(!buffer_uptodate(tbh));
BUG_ON(!buffer_mapped(tbh));
get_bh(tbh);
tbh->b_end_io = end_buffer_write_sync;
submit_bh(WRITE, tbh);
}
/* Synchronize the mft mirror now if not @sync. */
if (is_mft && !sync)
goto do_mirror;
do_wait:
/* Wait on i/o completion of buffers. */
for (i = 0; i < nr_bhs; i++) {
tbh = bhs[i];
if (!tbh)
continue;
wait_on_buffer(tbh);
if (unlikely(!buffer_uptodate(tbh))) {
ntfs_error(vol->sb, "I/O error while writing ntfs "
"record buffer (inode 0x%lx, "
"attribute type 0x%x, page index "
"0x%lx, page offset 0x%lx)! Unmount "
"and run chkdsk.", vi->i_ino, ni->type,
page->index, bh_offset(tbh));
if (!err || err == -ENOMEM)
err = -EIO;
/*
* Set the buffer uptodate so the page and buffer
* states do not become out of sync.
*/
set_buffer_uptodate(tbh);
}
}
/* If @sync, now synchronize the mft mirror. */
if (is_mft && sync) {
do_mirror:
for (i = 0; i < nr_bhs; i++) {
unsigned long mft_no;
unsigned int ofs;
/*
* Skip buffers which are not at the beginning of
* records.
*/
if (i % bhs_per_rec)
continue;
tbh = bhs[i];
/* Skip removed buffers (and hence records). */
if (!tbh)
continue;
ofs = bh_offset(tbh);
/* Get the mft record number. */
mft_no = (((s64)page->index << PAGE_CACHE_SHIFT) + ofs)
>> rec_size_bits;
if (mft_no < vol->mftmirr_size)
ntfs_sync_mft_mirror(vol, mft_no,
(MFT_RECORD*)(kaddr + ofs),
sync);
}
if (!sync)
goto do_wait;
}
/* Remove the mst protection fixups again. */
for (i = 0; i < nr_bhs; i++) {
if (!(i % bhs_per_rec)) {
tbh = bhs[i];
if (!tbh)
continue;
post_write_mst_fixup((NTFS_RECORD*)(kaddr +
bh_offset(tbh)));
}
}
flush_dcache_page(page);
unm_done:
/* Unlock any locked inodes. */
while (nr_locked_nis-- > 0) {
ntfs_inode *tni, *base_tni;
tni = locked_nis[nr_locked_nis];
/* Get the base inode. */
mutex_lock(&tni->extent_lock);
if (tni->nr_extents >= 0)
base_tni = tni;
else {
base_tni = tni->ext.base_ntfs_ino;
BUG_ON(!base_tni);
}
mutex_unlock(&tni->extent_lock);
ntfs_debug("Unlocking %s inode 0x%lx.",
tni == base_tni ? "base" : "extent",
tni->mft_no);
mutex_unlock(&tni->mrec_lock);
atomic_dec(&tni->count);
iput(VFS_I(base_tni));
}
SetPageUptodate(page);
kunmap(page);
done:
if (unlikely(err && err != -ENOMEM)) {
/*
* Set page error if there is only one ntfs record in the page.
* Otherwise we would loose per-record granularity.
*/
if (ni->itype.index.block_size == PAGE_CACHE_SIZE)
SetPageError(page);
NVolSetErrors(vol);
}
if (page_is_dirty) {
ntfs_debug("Page still contains one or more dirty ntfs "
"records. Redirtying the page starting at "
"record 0x%lx.", page->index <<
(PAGE_CACHE_SHIFT - rec_size_bits));
redirty_page_for_writepage(wbc, page);
unlock_page(page);
} else {
/*
* Keep the VM happy. This must be done otherwise the
* radix-tree tag PAGECACHE_TAG_DIRTY remains set even though
* the page is clean.
*/
BUG_ON(PageWriteback(page));
set_page_writeback(page);
unlock_page(page);
end_page_writeback(page);
}
if (likely(!err))
ntfs_debug("Done.");
return err;
}
/**
* ntfs_writepage - write a @page to the backing store
* @page: page cache page to write out
* @wbc: writeback control structure
*
* This is called from the VM when it wants to have a dirty ntfs page cache
* page cleaned. The VM has already locked the page and marked it clean.
*
* For non-resident attributes, ntfs_writepage() writes the @page by calling
* the ntfs version of the generic block_write_full_page() function,
* ntfs_write_block(), which in turn if necessary creates and writes the
* buffers associated with the page asynchronously.
*
* For resident attributes, OTOH, ntfs_writepage() writes the @page by copying
* the data to the mft record (which at this stage is most likely in memory).
* The mft record is then marked dirty and written out asynchronously via the
* vfs inode dirty code path for the inode the mft record belongs to or via the
* vm page dirty code path for the page the mft record is in.
*
* Based on ntfs_readpage() and fs/buffer.c::block_write_full_page().
*
* Return 0 on success and -errno on error.
*/
static int ntfs_writepage(struct page *page, struct writeback_control *wbc)
{
loff_t i_size;
struct inode *vi = page->mapping->host;
ntfs_inode *base_ni = NULL, *ni = NTFS_I(vi);
char *addr;
ntfs_attr_search_ctx *ctx = NULL;
MFT_RECORD *m = NULL;
u32 attr_len;
int err;
retry_writepage:
BUG_ON(!PageLocked(page));
i_size = i_size_read(vi);
/* Is the page fully outside i_size? (truncate in progress) */
if (unlikely(page->index >= (i_size + PAGE_CACHE_SIZE - 1) >>
PAGE_CACHE_SHIFT)) {
/*
* The page may have dirty, unmapped buffers. Make them
* freeable here, so the page does not leak.
*/
block_invalidatepage(page, 0);
unlock_page(page);
ntfs_debug("Write outside i_size - truncated?");
return 0;
}
/*
* Only $DATA attributes can be encrypted and only unnamed $DATA
* attributes can be compressed. Index root can have the flags set but
* this means to create compressed/encrypted files, not that the
* attribute is compressed/encrypted. Note we need to check for
* AT_INDEX_ALLOCATION since this is the type of both directory and
* index inodes.
*/
if (ni->type != AT_INDEX_ALLOCATION) {
/* If file is encrypted, deny access, just like NT4. */
if (NInoEncrypted(ni)) {
unlock_page(page);
BUG_ON(ni->type != AT_DATA);
ntfs_debug("Denying write access to encrypted file.");
return -EACCES;
}
/* Compressed data streams are handled in compress.c. */
if (NInoNonResident(ni) && NInoCompressed(ni)) {
BUG_ON(ni->type != AT_DATA);
BUG_ON(ni->name_len);
// TODO: Implement and replace this with
// return ntfs_write_compressed_block(page);
unlock_page(page);
ntfs_error(vi->i_sb, "Writing to compressed files is "
"not supported yet. Sorry.");
return -EOPNOTSUPP;
}
// TODO: Implement and remove this check.
if (NInoNonResident(ni) && NInoSparse(ni)) {
unlock_page(page);
ntfs_error(vi->i_sb, "Writing to sparse files is not "
"supported yet. Sorry.");
return -EOPNOTSUPP;
}
}
/* NInoNonResident() == NInoIndexAllocPresent() */
if (NInoNonResident(ni)) {
/* We have to zero every time due to mmap-at-end-of-file. */
if (page->index >= (i_size >> PAGE_CACHE_SHIFT)) {
/* The page straddles i_size. */
unsigned int ofs = i_size & ~PAGE_CACHE_MASK;
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:28:29 +08:00
zero_user_segment(page, ofs, PAGE_CACHE_SIZE);
}
/* Handle mst protected attributes. */
if (NInoMstProtected(ni))
return ntfs_write_mst_block(page, wbc);
/* Normal, non-resident data stream. */
return ntfs_write_block(page, wbc);
}
/*
* Attribute is resident, implying it is not compressed, encrypted, or
* mst protected. This also means the attribute is smaller than an mft
* record and hence smaller than a page, so can simply return error on
* any pages with index above 0. Note the attribute can actually be
* marked compressed but if it is resident the actual data is not
* compressed so we are ok to ignore the compressed flag here.
*/
BUG_ON(page_has_buffers(page));
BUG_ON(!PageUptodate(page));
if (unlikely(page->index > 0)) {
ntfs_error(vi->i_sb, "BUG()! page->index (0x%lx) > 0. "
"Aborting write.", page->index);
BUG_ON(PageWriteback(page));
set_page_writeback(page);
unlock_page(page);
end_page_writeback(page);
return -EIO;
}
if (!NInoAttr(ni))
base_ni = ni;
else
base_ni = ni->ext.base_ntfs_ino;
/* Map, pin, and lock the mft record. */
m = map_mft_record(base_ni);
if (IS_ERR(m)) {
err = PTR_ERR(m);
m = NULL;
ctx = NULL;
goto err_out;
}
/*
* If a parallel write made the attribute non-resident, drop the mft
* record and retry the writepage.
*/
if (unlikely(NInoNonResident(ni))) {
unmap_mft_record(base_ni);
goto retry_writepage;
}
ctx = ntfs_attr_get_search_ctx(base_ni, m);
if (unlikely(!ctx)) {
err = -ENOMEM;
goto err_out;
}
err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
CASE_SENSITIVE, 0, NULL, 0, ctx);
if (unlikely(err))
goto err_out;
/*
* Keep the VM happy. This must be done otherwise the radix-tree tag
* PAGECACHE_TAG_DIRTY remains set even though the page is clean.
*/
BUG_ON(PageWriteback(page));
set_page_writeback(page);
unlock_page(page);
attr_len = le32_to_cpu(ctx->attr->data.resident.value_length);
i_size = i_size_read(vi);
if (unlikely(attr_len > i_size)) {
/* Race with shrinking truncate or a failed truncate. */
attr_len = i_size;
/*
* If the truncate failed, fix it up now. If a concurrent
* truncate, we do its job, so it does not have to do anything.
*/
err = ntfs_resident_attr_value_resize(ctx->mrec, ctx->attr,
attr_len);
/* Shrinking cannot fail. */
BUG_ON(err);
}
addr = kmap_atomic(page, KM_USER0);
/* Copy the data from the page to the mft record. */
memcpy((u8*)ctx->attr +
le16_to_cpu(ctx->attr->data.resident.value_offset),
addr, attr_len);
/* Zero out of bounds area in the page cache page. */
memset(addr + attr_len, 0, PAGE_CACHE_SIZE - attr_len);
kunmap_atomic(addr, KM_USER0);
flush_dcache_page(page);
flush_dcache_mft_record_page(ctx->ntfs_ino);
/* We are done with the page. */
end_page_writeback(page);
/* Finally, mark the mft record dirty, so it gets written back. */
mark_mft_record_dirty(ctx->ntfs_ino);
ntfs_attr_put_search_ctx(ctx);
unmap_mft_record(base_ni);
return 0;
err_out:
if (err == -ENOMEM) {
ntfs_warning(vi->i_sb, "Error allocating memory. Redirtying "
"page so we try again later.");
/*
* Put the page back on mapping->dirty_pages, but leave its
* buffers' dirty state as-is.
*/
redirty_page_for_writepage(wbc, page);
err = 0;
} else {
ntfs_error(vi->i_sb, "Resident attribute write failed with "
"error %i.", err);
SetPageError(page);
NVolSetErrors(ni->vol);
}
unlock_page(page);
if (ctx)
ntfs_attr_put_search_ctx(ctx);
if (m)
unmap_mft_record(base_ni);
return err;
}
#endif /* NTFS_RW */
/**
* ntfs_aops - general address space operations for inodes and attributes
*/
const struct address_space_operations ntfs_aops = {
.readpage = ntfs_readpage, /* Fill page with data. */
.sync_page = block_sync_page, /* Currently, just unplugs the
disk request queue. */
#ifdef NTFS_RW
.writepage = ntfs_writepage, /* Write dirty page to disk. */
#endif /* NTFS_RW */
.migratepage = buffer_migrate_page, /* Move a page cache page from
one physical page to an
other. */
.error_remove_page = generic_error_remove_page,
};
/**
* ntfs_mst_aops - general address space operations for mst protecteed inodes
* and attributes
*/
const struct address_space_operations ntfs_mst_aops = {
.readpage = ntfs_readpage, /* Fill page with data. */
.sync_page = block_sync_page, /* Currently, just unplugs the
disk request queue. */
#ifdef NTFS_RW
.writepage = ntfs_writepage, /* Write dirty page to disk. */
.set_page_dirty = __set_page_dirty_nobuffers, /* Set the page dirty
without touching the buffers
belonging to the page. */
#endif /* NTFS_RW */
.migratepage = buffer_migrate_page, /* Move a page cache page from
one physical page to an
other. */
.error_remove_page = generic_error_remove_page,
};
#ifdef NTFS_RW
/**
* mark_ntfs_record_dirty - mark an ntfs record dirty
* @page: page containing the ntfs record to mark dirty
* @ofs: byte offset within @page at which the ntfs record begins
*
* Set the buffers and the page in which the ntfs record is located dirty.
*
* The latter also marks the vfs inode the ntfs record belongs to dirty
* (I_DIRTY_PAGES only).
*
* If the page does not have buffers, we create them and set them uptodate.
* The page may not be locked which is why we need to handle the buffers under
* the mapping->private_lock. Once the buffers are marked dirty we no longer
* need the lock since try_to_free_buffers() does not free dirty buffers.
*/
void mark_ntfs_record_dirty(struct page *page, const unsigned int ofs) {
struct address_space *mapping = page->mapping;
ntfs_inode *ni = NTFS_I(mapping->host);
struct buffer_head *bh, *head, *buffers_to_free = NULL;
unsigned int end, bh_size, bh_ofs;
BUG_ON(!PageUptodate(page));
end = ofs + ni->itype.index.block_size;
bh_size = VFS_I(ni)->i_sb->s_blocksize;
spin_lock(&mapping->private_lock);
if (unlikely(!page_has_buffers(page))) {
spin_unlock(&mapping->private_lock);
bh = head = alloc_page_buffers(page, bh_size, 1);
spin_lock(&mapping->private_lock);
if (likely(!page_has_buffers(page))) {
struct buffer_head *tail;
do {
set_buffer_uptodate(bh);
tail = bh;
bh = bh->b_this_page;
} while (bh);
tail->b_this_page = head;
attach_page_buffers(page, head);
} else
buffers_to_free = bh;
}
bh = head = page_buffers(page);
BUG_ON(!bh);
do {
bh_ofs = bh_offset(bh);
if (bh_ofs + bh_size <= ofs)
continue;
if (unlikely(bh_ofs >= end))
break;
set_buffer_dirty(bh);
} while ((bh = bh->b_this_page) != head);
spin_unlock(&mapping->private_lock);
__set_page_dirty_nobuffers(page);
if (unlikely(buffers_to_free)) {
do {
bh = buffers_to_free->b_this_page;
free_buffer_head(buffers_to_free);
buffers_to_free = bh;
} while (buffers_to_free);
}
}
#endif /* NTFS_RW */