linux_old1/lib/kobject_uevent.c

661 lines
15 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* kernel userspace event delivery
*
* Copyright (C) 2004 Red Hat, Inc. All rights reserved.
* Copyright (C) 2004 Novell, Inc. All rights reserved.
* Copyright (C) 2004 IBM, Inc. All rights reserved.
*
* Authors:
* Robert Love <rml@novell.com>
* Kay Sievers <kay.sievers@vrfy.org>
* Arjan van de Ven <arjanv@redhat.com>
* Greg Kroah-Hartman <greg@kroah.com>
*/
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/kobject.h>
#include <linux/export.h>
#include <linux/kmod.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/socket.h>
#include <linux/skbuff.h>
#include <linux/netlink.h>
kobject: support passing in variables for synthetic uevents This patch makes it possible to pass additional arguments in addition to uevent action name when writing /sys/.../uevent attribute. These additional arguments are then inserted into generated synthetic uevent as additional environment variables. Before, we were not able to pass any additional uevent environment variables for synthetic uevents. This made it hard to identify such uevents properly in userspace to make proper distinction between genuine uevents originating from kernel and synthetic uevents triggered from userspace. Also, it was not possible to pass any additional information which would make it possible to optimize and change the way the synthetic uevents are processed back in userspace based on the originating environment of the triggering action in userspace. With the extra additional variables, we are able to pass through this extra information needed and also it makes it possible to synchronize with such synthetic uevents as they can be clearly identified back in userspace. The format for writing the uevent attribute is following: ACTION [UUID [KEY=VALUE ...] There's no change in how "ACTION" is recognized - it stays the same ("add", "change", "remove"). The "ACTION" is the only argument required to generate synthetic uevent, the rest of arguments, that this patch adds support for, are optional. The "UUID" is considered as transaction identifier so it's possible to use the same UUID value for one or more synthetic uevents in which case we logically group these uevents together for any userspace listeners. The "UUID" is expected to be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" format where "x" is a hex digit. The value appears in uevent as "SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment variable. The "KEY=VALUE" pairs can contain alphanumeric characters only. It's possible to define zero or more more pairs - each pair is then delimited by a space character " ". Each pair appears in synthetic uevents as "SYNTH_ARG_KEY=VALUE" environment variable. That means the KEY name gains "SYNTH_ARG_" prefix to avoid possible collisions with existing variables. To pass the "KEY=VALUE" pairs, it's also required to pass in the "UUID" part for the synthetic uevent first. If "UUID" is not passed in, the generated synthetic uevent gains "SYNTH_UUID=0" environment variable automatically so it's possible to identify this situation in userspace when reading generated uevent and so we can still make a difference between genuine and synthetic uevents. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-09 21:22:30 +08:00
#include <linux/uuid.h>
#include <linux/ctype.h>
#include <net/sock.h>
#include <net/net_namespace.h>
u64 uevent_seqnum;
#ifdef CONFIG_UEVENT_HELPER
char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
#endif
struct uevent_sock {
struct list_head list;
struct sock *sk;
};
#ifdef CONFIG_NET
static LIST_HEAD(uevent_sock_list);
#endif
/* This lock protects uevent_seqnum and uevent_sock_list */
static DEFINE_MUTEX(uevent_sock_mutex);
/* the strings here must match the enum in include/linux/kobject.h */
static const char *kobject_actions[] = {
[KOBJ_ADD] = "add",
[KOBJ_REMOVE] = "remove",
[KOBJ_CHANGE] = "change",
[KOBJ_MOVE] = "move",
[KOBJ_ONLINE] = "online",
[KOBJ_OFFLINE] = "offline",
[KOBJ_BIND] = "bind",
[KOBJ_UNBIND] = "unbind",
};
kobject: support passing in variables for synthetic uevents This patch makes it possible to pass additional arguments in addition to uevent action name when writing /sys/.../uevent attribute. These additional arguments are then inserted into generated synthetic uevent as additional environment variables. Before, we were not able to pass any additional uevent environment variables for synthetic uevents. This made it hard to identify such uevents properly in userspace to make proper distinction between genuine uevents originating from kernel and synthetic uevents triggered from userspace. Also, it was not possible to pass any additional information which would make it possible to optimize and change the way the synthetic uevents are processed back in userspace based on the originating environment of the triggering action in userspace. With the extra additional variables, we are able to pass through this extra information needed and also it makes it possible to synchronize with such synthetic uevents as they can be clearly identified back in userspace. The format for writing the uevent attribute is following: ACTION [UUID [KEY=VALUE ...] There's no change in how "ACTION" is recognized - it stays the same ("add", "change", "remove"). The "ACTION" is the only argument required to generate synthetic uevent, the rest of arguments, that this patch adds support for, are optional. The "UUID" is considered as transaction identifier so it's possible to use the same UUID value for one or more synthetic uevents in which case we logically group these uevents together for any userspace listeners. The "UUID" is expected to be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" format where "x" is a hex digit. The value appears in uevent as "SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment variable. The "KEY=VALUE" pairs can contain alphanumeric characters only. It's possible to define zero or more more pairs - each pair is then delimited by a space character " ". Each pair appears in synthetic uevents as "SYNTH_ARG_KEY=VALUE" environment variable. That means the KEY name gains "SYNTH_ARG_" prefix to avoid possible collisions with existing variables. To pass the "KEY=VALUE" pairs, it's also required to pass in the "UUID" part for the synthetic uevent first. If "UUID" is not passed in, the generated synthetic uevent gains "SYNTH_UUID=0" environment variable automatically so it's possible to identify this situation in userspace when reading generated uevent and so we can still make a difference between genuine and synthetic uevents. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-09 21:22:30 +08:00
static int kobject_action_type(const char *buf, size_t count,
enum kobject_action *type,
const char **args)
{
enum kobject_action action;
kobject: support passing in variables for synthetic uevents This patch makes it possible to pass additional arguments in addition to uevent action name when writing /sys/.../uevent attribute. These additional arguments are then inserted into generated synthetic uevent as additional environment variables. Before, we were not able to pass any additional uevent environment variables for synthetic uevents. This made it hard to identify such uevents properly in userspace to make proper distinction between genuine uevents originating from kernel and synthetic uevents triggered from userspace. Also, it was not possible to pass any additional information which would make it possible to optimize and change the way the synthetic uevents are processed back in userspace based on the originating environment of the triggering action in userspace. With the extra additional variables, we are able to pass through this extra information needed and also it makes it possible to synchronize with such synthetic uevents as they can be clearly identified back in userspace. The format for writing the uevent attribute is following: ACTION [UUID [KEY=VALUE ...] There's no change in how "ACTION" is recognized - it stays the same ("add", "change", "remove"). The "ACTION" is the only argument required to generate synthetic uevent, the rest of arguments, that this patch adds support for, are optional. The "UUID" is considered as transaction identifier so it's possible to use the same UUID value for one or more synthetic uevents in which case we logically group these uevents together for any userspace listeners. The "UUID" is expected to be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" format where "x" is a hex digit. The value appears in uevent as "SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment variable. The "KEY=VALUE" pairs can contain alphanumeric characters only. It's possible to define zero or more more pairs - each pair is then delimited by a space character " ". Each pair appears in synthetic uevents as "SYNTH_ARG_KEY=VALUE" environment variable. That means the KEY name gains "SYNTH_ARG_" prefix to avoid possible collisions with existing variables. To pass the "KEY=VALUE" pairs, it's also required to pass in the "UUID" part for the synthetic uevent first. If "UUID" is not passed in, the generated synthetic uevent gains "SYNTH_UUID=0" environment variable automatically so it's possible to identify this situation in userspace when reading generated uevent and so we can still make a difference between genuine and synthetic uevents. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-09 21:22:30 +08:00
size_t count_first;
const char *args_start;
int ret = -EINVAL;
if (count && (buf[count-1] == '\n' || buf[count-1] == '\0'))
count--;
if (!count)
goto out;
kobject: support passing in variables for synthetic uevents This patch makes it possible to pass additional arguments in addition to uevent action name when writing /sys/.../uevent attribute. These additional arguments are then inserted into generated synthetic uevent as additional environment variables. Before, we were not able to pass any additional uevent environment variables for synthetic uevents. This made it hard to identify such uevents properly in userspace to make proper distinction between genuine uevents originating from kernel and synthetic uevents triggered from userspace. Also, it was not possible to pass any additional information which would make it possible to optimize and change the way the synthetic uevents are processed back in userspace based on the originating environment of the triggering action in userspace. With the extra additional variables, we are able to pass through this extra information needed and also it makes it possible to synchronize with such synthetic uevents as they can be clearly identified back in userspace. The format for writing the uevent attribute is following: ACTION [UUID [KEY=VALUE ...] There's no change in how "ACTION" is recognized - it stays the same ("add", "change", "remove"). The "ACTION" is the only argument required to generate synthetic uevent, the rest of arguments, that this patch adds support for, are optional. The "UUID" is considered as transaction identifier so it's possible to use the same UUID value for one or more synthetic uevents in which case we logically group these uevents together for any userspace listeners. The "UUID" is expected to be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" format where "x" is a hex digit. The value appears in uevent as "SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment variable. The "KEY=VALUE" pairs can contain alphanumeric characters only. It's possible to define zero or more more pairs - each pair is then delimited by a space character " ". Each pair appears in synthetic uevents as "SYNTH_ARG_KEY=VALUE" environment variable. That means the KEY name gains "SYNTH_ARG_" prefix to avoid possible collisions with existing variables. To pass the "KEY=VALUE" pairs, it's also required to pass in the "UUID" part for the synthetic uevent first. If "UUID" is not passed in, the generated synthetic uevent gains "SYNTH_UUID=0" environment variable automatically so it's possible to identify this situation in userspace when reading generated uevent and so we can still make a difference between genuine and synthetic uevents. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-09 21:22:30 +08:00
args_start = strnchr(buf, count, ' ');
if (args_start) {
count_first = args_start - buf;
args_start = args_start + 1;
} else
count_first = count;
for (action = 0; action < ARRAY_SIZE(kobject_actions); action++) {
kobject: support passing in variables for synthetic uevents This patch makes it possible to pass additional arguments in addition to uevent action name when writing /sys/.../uevent attribute. These additional arguments are then inserted into generated synthetic uevent as additional environment variables. Before, we were not able to pass any additional uevent environment variables for synthetic uevents. This made it hard to identify such uevents properly in userspace to make proper distinction between genuine uevents originating from kernel and synthetic uevents triggered from userspace. Also, it was not possible to pass any additional information which would make it possible to optimize and change the way the synthetic uevents are processed back in userspace based on the originating environment of the triggering action in userspace. With the extra additional variables, we are able to pass through this extra information needed and also it makes it possible to synchronize with such synthetic uevents as they can be clearly identified back in userspace. The format for writing the uevent attribute is following: ACTION [UUID [KEY=VALUE ...] There's no change in how "ACTION" is recognized - it stays the same ("add", "change", "remove"). The "ACTION" is the only argument required to generate synthetic uevent, the rest of arguments, that this patch adds support for, are optional. The "UUID" is considered as transaction identifier so it's possible to use the same UUID value for one or more synthetic uevents in which case we logically group these uevents together for any userspace listeners. The "UUID" is expected to be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" format where "x" is a hex digit. The value appears in uevent as "SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment variable. The "KEY=VALUE" pairs can contain alphanumeric characters only. It's possible to define zero or more more pairs - each pair is then delimited by a space character " ". Each pair appears in synthetic uevents as "SYNTH_ARG_KEY=VALUE" environment variable. That means the KEY name gains "SYNTH_ARG_" prefix to avoid possible collisions with existing variables. To pass the "KEY=VALUE" pairs, it's also required to pass in the "UUID" part for the synthetic uevent first. If "UUID" is not passed in, the generated synthetic uevent gains "SYNTH_UUID=0" environment variable automatically so it's possible to identify this situation in userspace when reading generated uevent and so we can still make a difference between genuine and synthetic uevents. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-09 21:22:30 +08:00
if (strncmp(kobject_actions[action], buf, count_first) != 0)
continue;
kobject: support passing in variables for synthetic uevents This patch makes it possible to pass additional arguments in addition to uevent action name when writing /sys/.../uevent attribute. These additional arguments are then inserted into generated synthetic uevent as additional environment variables. Before, we were not able to pass any additional uevent environment variables for synthetic uevents. This made it hard to identify such uevents properly in userspace to make proper distinction between genuine uevents originating from kernel and synthetic uevents triggered from userspace. Also, it was not possible to pass any additional information which would make it possible to optimize and change the way the synthetic uevents are processed back in userspace based on the originating environment of the triggering action in userspace. With the extra additional variables, we are able to pass through this extra information needed and also it makes it possible to synchronize with such synthetic uevents as they can be clearly identified back in userspace. The format for writing the uevent attribute is following: ACTION [UUID [KEY=VALUE ...] There's no change in how "ACTION" is recognized - it stays the same ("add", "change", "remove"). The "ACTION" is the only argument required to generate synthetic uevent, the rest of arguments, that this patch adds support for, are optional. The "UUID" is considered as transaction identifier so it's possible to use the same UUID value for one or more synthetic uevents in which case we logically group these uevents together for any userspace listeners. The "UUID" is expected to be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" format where "x" is a hex digit. The value appears in uevent as "SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment variable. The "KEY=VALUE" pairs can contain alphanumeric characters only. It's possible to define zero or more more pairs - each pair is then delimited by a space character " ". Each pair appears in synthetic uevents as "SYNTH_ARG_KEY=VALUE" environment variable. That means the KEY name gains "SYNTH_ARG_" prefix to avoid possible collisions with existing variables. To pass the "KEY=VALUE" pairs, it's also required to pass in the "UUID" part for the synthetic uevent first. If "UUID" is not passed in, the generated synthetic uevent gains "SYNTH_UUID=0" environment variable automatically so it's possible to identify this situation in userspace when reading generated uevent and so we can still make a difference between genuine and synthetic uevents. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-09 21:22:30 +08:00
if (kobject_actions[action][count_first] != '\0')
continue;
kobject: support passing in variables for synthetic uevents This patch makes it possible to pass additional arguments in addition to uevent action name when writing /sys/.../uevent attribute. These additional arguments are then inserted into generated synthetic uevent as additional environment variables. Before, we were not able to pass any additional uevent environment variables for synthetic uevents. This made it hard to identify such uevents properly in userspace to make proper distinction between genuine uevents originating from kernel and synthetic uevents triggered from userspace. Also, it was not possible to pass any additional information which would make it possible to optimize and change the way the synthetic uevents are processed back in userspace based on the originating environment of the triggering action in userspace. With the extra additional variables, we are able to pass through this extra information needed and also it makes it possible to synchronize with such synthetic uevents as they can be clearly identified back in userspace. The format for writing the uevent attribute is following: ACTION [UUID [KEY=VALUE ...] There's no change in how "ACTION" is recognized - it stays the same ("add", "change", "remove"). The "ACTION" is the only argument required to generate synthetic uevent, the rest of arguments, that this patch adds support for, are optional. The "UUID" is considered as transaction identifier so it's possible to use the same UUID value for one or more synthetic uevents in which case we logically group these uevents together for any userspace listeners. The "UUID" is expected to be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" format where "x" is a hex digit. The value appears in uevent as "SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment variable. The "KEY=VALUE" pairs can contain alphanumeric characters only. It's possible to define zero or more more pairs - each pair is then delimited by a space character " ". Each pair appears in synthetic uevents as "SYNTH_ARG_KEY=VALUE" environment variable. That means the KEY name gains "SYNTH_ARG_" prefix to avoid possible collisions with existing variables. To pass the "KEY=VALUE" pairs, it's also required to pass in the "UUID" part for the synthetic uevent first. If "UUID" is not passed in, the generated synthetic uevent gains "SYNTH_UUID=0" environment variable automatically so it's possible to identify this situation in userspace when reading generated uevent and so we can still make a difference between genuine and synthetic uevents. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-09 21:22:30 +08:00
if (args)
*args = args_start;
*type = action;
ret = 0;
break;
}
out:
return ret;
}
kobject: support passing in variables for synthetic uevents This patch makes it possible to pass additional arguments in addition to uevent action name when writing /sys/.../uevent attribute. These additional arguments are then inserted into generated synthetic uevent as additional environment variables. Before, we were not able to pass any additional uevent environment variables for synthetic uevents. This made it hard to identify such uevents properly in userspace to make proper distinction between genuine uevents originating from kernel and synthetic uevents triggered from userspace. Also, it was not possible to pass any additional information which would make it possible to optimize and change the way the synthetic uevents are processed back in userspace based on the originating environment of the triggering action in userspace. With the extra additional variables, we are able to pass through this extra information needed and also it makes it possible to synchronize with such synthetic uevents as they can be clearly identified back in userspace. The format for writing the uevent attribute is following: ACTION [UUID [KEY=VALUE ...] There's no change in how "ACTION" is recognized - it stays the same ("add", "change", "remove"). The "ACTION" is the only argument required to generate synthetic uevent, the rest of arguments, that this patch adds support for, are optional. The "UUID" is considered as transaction identifier so it's possible to use the same UUID value for one or more synthetic uevents in which case we logically group these uevents together for any userspace listeners. The "UUID" is expected to be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" format where "x" is a hex digit. The value appears in uevent as "SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment variable. The "KEY=VALUE" pairs can contain alphanumeric characters only. It's possible to define zero or more more pairs - each pair is then delimited by a space character " ". Each pair appears in synthetic uevents as "SYNTH_ARG_KEY=VALUE" environment variable. That means the KEY name gains "SYNTH_ARG_" prefix to avoid possible collisions with existing variables. To pass the "KEY=VALUE" pairs, it's also required to pass in the "UUID" part for the synthetic uevent first. If "UUID" is not passed in, the generated synthetic uevent gains "SYNTH_UUID=0" environment variable automatically so it's possible to identify this situation in userspace when reading generated uevent and so we can still make a difference between genuine and synthetic uevents. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-09 21:22:30 +08:00
static const char *action_arg_word_end(const char *buf, const char *buf_end,
char delim)
{
const char *next = buf;
while (next <= buf_end && *next != delim)
if (!isalnum(*next++))
return NULL;
if (next == buf)
return NULL;
return next;
}
static int kobject_action_args(const char *buf, size_t count,
struct kobj_uevent_env **ret_env)
{
struct kobj_uevent_env *env = NULL;
const char *next, *buf_end, *key;
int key_len;
int r = -EINVAL;
if (count && (buf[count - 1] == '\n' || buf[count - 1] == '\0'))
count--;
if (!count)
return -EINVAL;
env = kzalloc(sizeof(*env), GFP_KERNEL);
if (!env)
return -ENOMEM;
/* first arg is UUID */
if (count < UUID_STRING_LEN || !uuid_is_valid(buf) ||
add_uevent_var(env, "SYNTH_UUID=%.*s", UUID_STRING_LEN, buf))
goto out;
/*
* the rest are custom environment variables in KEY=VALUE
* format with ' ' delimiter between each KEY=VALUE pair
*/
next = buf + UUID_STRING_LEN;
buf_end = buf + count - 1;
while (next <= buf_end) {
if (*next != ' ')
goto out;
/* skip the ' ', key must follow */
key = ++next;
if (key > buf_end)
goto out;
buf = next;
next = action_arg_word_end(buf, buf_end, '=');
if (!next || next > buf_end || *next != '=')
goto out;
key_len = next - buf;
/* skip the '=', value must follow */
if (++next > buf_end)
goto out;
buf = next;
next = action_arg_word_end(buf, buf_end, ' ');
if (!next)
goto out;
if (add_uevent_var(env, "SYNTH_ARG_%.*s=%.*s",
key_len, key, (int) (next - buf), buf))
goto out;
}
r = 0;
out:
if (r)
kfree(env);
else
*ret_env = env;
return r;
}
/**
* kobject_synth_uevent - send synthetic uevent with arguments
*
* @kobj: struct kobject for which synthetic uevent is to be generated
* @buf: buffer containing action type and action args, newline is ignored
* @count: length of buffer
*
* Returns 0 if kobject_synthetic_uevent() is completed with success or the
* corresponding error when it fails.
*/
int kobject_synth_uevent(struct kobject *kobj, const char *buf, size_t count)
{
char *no_uuid_envp[] = { "SYNTH_UUID=0", NULL };
enum kobject_action action;
const char *action_args;
struct kobj_uevent_env *env;
const char *msg = NULL, *devpath;
int r;
r = kobject_action_type(buf, count, &action, &action_args);
if (r) {
msg = "unknown uevent action string\n";
goto out;
}
if (!action_args) {
r = kobject_uevent_env(kobj, action, no_uuid_envp);
goto out;
}
r = kobject_action_args(action_args,
count - (action_args - buf), &env);
if (r == -EINVAL) {
msg = "incorrect uevent action arguments\n";
goto out;
}
if (r)
goto out;
r = kobject_uevent_env(kobj, action, env->envp);
kfree(env);
out:
if (r) {
devpath = kobject_get_path(kobj, GFP_KERNEL);
printk(KERN_WARNING "synth uevent: %s: %s",
devpath ?: "unknown device",
msg ?: "failed to send uevent");
kfree(devpath);
}
return r;
}
#ifdef CONFIG_NET
static int kobj_bcast_filter(struct sock *dsk, struct sk_buff *skb, void *data)
{
struct kobject *kobj = data, *ksobj;
const struct kobj_ns_type_operations *ops;
ops = kobj_ns_ops(kobj);
if (!ops && kobj->kset) {
ksobj = &kobj->kset->kobj;
if (ksobj->parent != NULL)
ops = kobj_ns_ops(ksobj->parent);
}
if (ops && ops->netlink_ns && kobj->ktype->namespace) {
const void *sock_ns, *ns;
ns = kobj->ktype->namespace(kobj);
sock_ns = ops->netlink_ns(dsk);
return sock_ns != ns;
}
return 0;
}
#endif
#ifdef CONFIG_UEVENT_HELPER
static int kobj_usermode_filter(struct kobject *kobj)
{
const struct kobj_ns_type_operations *ops;
ops = kobj_ns_ops(kobj);
if (ops) {
const void *init_ns, *ns;
ns = kobj->ktype->namespace(kobj);
init_ns = ops->initial_ns();
return ns != init_ns;
}
return 0;
}
kobject: don't block for each kobject_uevent Currently kobject_uevent has somewhat unpredictable semantics. The point is, since it may call a usermode helper and wait for it to execute (UMH_WAIT_EXEC), it is impossible to say for sure what lock dependencies it will introduce for the caller - strictly speaking it depends on what fs the binary is located on and the set of locks fork may take. There are quite a few kobject_uevent's users that do not take this into account and call it with various mutexes taken, e.g. rtnl_mutex, net_mutex, which might potentially lead to a deadlock. Since there is actually no reason to wait for the usermode helper to execute there, let's make kobject_uevent start the helper asynchronously with the aid of the UMH_NO_WAIT flag. Personally, I'm interested in this, because I really want kobject_uevent to be called under the slab_mutex in the slub implementation as it used to be some time ago, because it greatly simplifies synchronization and automatically fixes a kmemcg-related race. However, there was a deadlock detected on an attempt to call kobject_uevent under the slab_mutex (see https://lkml.org/lkml/2012/1/14/45), which was reported to be fixed by releasing the slab_mutex for kobject_uevent. Unfortunately, there was no information about who exactly blocked on the slab_mutex causing the usermode helper to stall, neither have I managed to find this out or reproduce the issue. BTW, this is not the first attempt to make kobject_uevent use UMH_NO_WAIT. Previous one was made by commit f520360d93cd ("kobject: don't block for each kobject_uevent"), but it was wrong (it passed arguments allocated on stack to async thread) so it was reverted in 05f54c13cd0c ("Revert "kobject: don't block for each kobject_uevent"."). It targeted on speeding up the boot process though. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg KH <greg@kroah.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:48:21 +08:00
static int init_uevent_argv(struct kobj_uevent_env *env, const char *subsystem)
{
int len;
len = strlcpy(&env->buf[env->buflen], subsystem,
sizeof(env->buf) - env->buflen);
if (len >= (sizeof(env->buf) - env->buflen)) {
WARN(1, KERN_ERR "init_uevent_argv: buffer size too small\n");
return -ENOMEM;
}
env->argv[0] = uevent_helper;
env->argv[1] = &env->buf[env->buflen];
env->argv[2] = NULL;
env->buflen += len + 1;
return 0;
}
static void cleanup_uevent_env(struct subprocess_info *info)
{
kfree(info->data);
}
#endif
kobject: don't block for each kobject_uevent Currently kobject_uevent has somewhat unpredictable semantics. The point is, since it may call a usermode helper and wait for it to execute (UMH_WAIT_EXEC), it is impossible to say for sure what lock dependencies it will introduce for the caller - strictly speaking it depends on what fs the binary is located on and the set of locks fork may take. There are quite a few kobject_uevent's users that do not take this into account and call it with various mutexes taken, e.g. rtnl_mutex, net_mutex, which might potentially lead to a deadlock. Since there is actually no reason to wait for the usermode helper to execute there, let's make kobject_uevent start the helper asynchronously with the aid of the UMH_NO_WAIT flag. Personally, I'm interested in this, because I really want kobject_uevent to be called under the slab_mutex in the slub implementation as it used to be some time ago, because it greatly simplifies synchronization and automatically fixes a kmemcg-related race. However, there was a deadlock detected on an attempt to call kobject_uevent under the slab_mutex (see https://lkml.org/lkml/2012/1/14/45), which was reported to be fixed by releasing the slab_mutex for kobject_uevent. Unfortunately, there was no information about who exactly blocked on the slab_mutex causing the usermode helper to stall, neither have I managed to find this out or reproduce the issue. BTW, this is not the first attempt to make kobject_uevent use UMH_NO_WAIT. Previous one was made by commit f520360d93cd ("kobject: don't block for each kobject_uevent"), but it was wrong (it passed arguments allocated on stack to async thread) so it was reverted in 05f54c13cd0c ("Revert "kobject: don't block for each kobject_uevent"."). It targeted on speeding up the boot process though. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg KH <greg@kroah.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:48:21 +08:00
static int kobject_uevent_net_broadcast(struct kobject *kobj,
struct kobj_uevent_env *env,
const char *action_string,
const char *devpath)
{
int retval = 0;
#if defined(CONFIG_NET)
struct sk_buff *skb = NULL;
struct uevent_sock *ue_sk;
/* send netlink message */
list_for_each_entry(ue_sk, &uevent_sock_list, list) {
struct sock *uevent_sock = ue_sk->sk;
if (!netlink_has_listeners(uevent_sock, 1))
continue;
if (!skb) {
/* allocate message with the maximum possible size */
size_t len = strlen(action_string) + strlen(devpath) + 2;
char *scratch;
retval = -ENOMEM;
skb = alloc_skb(len + env->buflen, GFP_KERNEL);
if (!skb)
continue;
/* add header */
scratch = skb_put(skb, len);
sprintf(scratch, "%s@%s", action_string, devpath);
2017-09-20 07:27:04 +08:00
skb_put_data(skb, env->buf, env->buflen);
NETLINK_CB(skb).dst_group = 1;
}
retval = netlink_broadcast_filtered(uevent_sock, skb_get(skb),
0, 1, GFP_KERNEL,
kobj_bcast_filter,
kobj);
/* ENOBUFS should be handled in userspace */
if (retval == -ENOBUFS || retval == -ESRCH)
retval = 0;
}
consume_skb(skb);
#endif
return retval;
}
static void zap_modalias_env(struct kobj_uevent_env *env)
{
static const char modalias_prefix[] = "MODALIAS=";
size_t len;
int i, j;
for (i = 0; i < env->envp_idx;) {
if (strncmp(env->envp[i], modalias_prefix,
sizeof(modalias_prefix) - 1)) {
i++;
continue;
}
len = strlen(env->envp[i]) + 1;
if (i != env->envp_idx - 1) {
memmove(env->envp[i], env->envp[i + 1],
env->buflen - len);
for (j = i; j < env->envp_idx - 1; j++)
env->envp[j] = env->envp[j + 1] - len;
}
env->envp_idx--;
env->buflen -= len;
}
}
/**
* kobject_uevent_env - send an uevent with environmental data
*
* @kobj: struct kobject that the action is happening to
* @action: action that is happening
* @envp_ext: pointer to environmental data
*
* Returns 0 if kobject_uevent_env() is completed with success or the
* corresponding error when it fails.
*/
int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
char *envp_ext[])
{
struct kobj_uevent_env *env;
const char *action_string = kobject_actions[action];
const char *devpath = NULL;
const char *subsystem;
struct kobject *top_kobj;
struct kset *kset;
const struct kset_uevent_ops *uevent_ops;
int i = 0;
int retval = 0;
pr_debug("kobject: '%s' (%p): %s\n",
kobject_name(kobj), kobj, __func__);
/* search the kset we belong to */
top_kobj = kobj;
while (!top_kobj->kset && top_kobj->parent)
top_kobj = top_kobj->parent;
if (!top_kobj->kset) {
pr_debug("kobject: '%s' (%p): %s: attempted to send uevent "
"without kset!\n", kobject_name(kobj), kobj,
__func__);
return -EINVAL;
}
kset = top_kobj->kset;
uevent_ops = kset->uevent_ops;
/* skip the event, if uevent_suppress is set*/
if (kobj->uevent_suppress) {
pr_debug("kobject: '%s' (%p): %s: uevent_suppress "
"caused the event to drop!\n",
kobject_name(kobj), kobj, __func__);
return 0;
}
/* skip the event, if the filter returns zero. */
if (uevent_ops && uevent_ops->filter)
if (!uevent_ops->filter(kset, kobj)) {
pr_debug("kobject: '%s' (%p): %s: filter function "
"caused the event to drop!\n",
kobject_name(kobj), kobj, __func__);
return 0;
}
/* originating subsystem */
if (uevent_ops && uevent_ops->name)
subsystem = uevent_ops->name(kset, kobj);
else
subsystem = kobject_name(&kset->kobj);
if (!subsystem) {
pr_debug("kobject: '%s' (%p): %s: unset subsystem caused the "
"event to drop!\n", kobject_name(kobj), kobj,
__func__);
return 0;
}
/* environment buffer */
env = kzalloc(sizeof(struct kobj_uevent_env), GFP_KERNEL);
if (!env)
return -ENOMEM;
/* complete object path */
devpath = kobject_get_path(kobj, GFP_KERNEL);
if (!devpath) {
retval = -ENOENT;
goto exit;
}
/* default keys */
retval = add_uevent_var(env, "ACTION=%s", action_string);
if (retval)
goto exit;
retval = add_uevent_var(env, "DEVPATH=%s", devpath);
if (retval)
goto exit;
retval = add_uevent_var(env, "SUBSYSTEM=%s", subsystem);
if (retval)
goto exit;
/* keys passed in from the caller */
if (envp_ext) {
for (i = 0; envp_ext[i]; i++) {
retval = add_uevent_var(env, "%s", envp_ext[i]);
if (retval)
goto exit;
}
}
/* let the kset specific function add its stuff */
if (uevent_ops && uevent_ops->uevent) {
retval = uevent_ops->uevent(kset, kobj, env);
if (retval) {
pr_debug("kobject: '%s' (%p): %s: uevent() returned "
"%d\n", kobject_name(kobj), kobj,
__func__, retval);
goto exit;
}
}
switch (action) {
case KOBJ_ADD:
/*
* Mark "add" event so we can make sure we deliver "remove"
* event to userspace during automatic cleanup. If
* the object did send an "add" event, "remove" will
* automatically generated by the core, if not already done
* by the caller.
*/
kobj->state_add_uevent_sent = 1;
break;
case KOBJ_REMOVE:
kobj->state_remove_uevent_sent = 1;
break;
case KOBJ_UNBIND:
zap_modalias_env(env);
break;
default:
break;
}
mutex_lock(&uevent_sock_mutex);
/* we will send an event, so request a new sequence number */
retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)++uevent_seqnum);
if (retval) {
mutex_unlock(&uevent_sock_mutex);
goto exit;
}
retval = kobject_uevent_net_broadcast(kobj, env, action_string,
devpath);
mutex_unlock(&uevent_sock_mutex);
#ifdef CONFIG_UEVENT_HELPER
/* call uevent_helper, usually only enabled during early boot */
if (uevent_helper[0] && !kobj_usermode_filter(kobj)) {
kobject: don't block for each kobject_uevent Currently kobject_uevent has somewhat unpredictable semantics. The point is, since it may call a usermode helper and wait for it to execute (UMH_WAIT_EXEC), it is impossible to say for sure what lock dependencies it will introduce for the caller - strictly speaking it depends on what fs the binary is located on and the set of locks fork may take. There are quite a few kobject_uevent's users that do not take this into account and call it with various mutexes taken, e.g. rtnl_mutex, net_mutex, which might potentially lead to a deadlock. Since there is actually no reason to wait for the usermode helper to execute there, let's make kobject_uevent start the helper asynchronously with the aid of the UMH_NO_WAIT flag. Personally, I'm interested in this, because I really want kobject_uevent to be called under the slab_mutex in the slub implementation as it used to be some time ago, because it greatly simplifies synchronization and automatically fixes a kmemcg-related race. However, there was a deadlock detected on an attempt to call kobject_uevent under the slab_mutex (see https://lkml.org/lkml/2012/1/14/45), which was reported to be fixed by releasing the slab_mutex for kobject_uevent. Unfortunately, there was no information about who exactly blocked on the slab_mutex causing the usermode helper to stall, neither have I managed to find this out or reproduce the issue. BTW, this is not the first attempt to make kobject_uevent use UMH_NO_WAIT. Previous one was made by commit f520360d93cd ("kobject: don't block for each kobject_uevent"), but it was wrong (it passed arguments allocated on stack to async thread) so it was reverted in 05f54c13cd0c ("Revert "kobject: don't block for each kobject_uevent"."). It targeted on speeding up the boot process though. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg KH <greg@kroah.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:48:21 +08:00
struct subprocess_info *info;
retval = add_uevent_var(env, "HOME=/");
if (retval)
goto exit;
retval = add_uevent_var(env,
"PATH=/sbin:/bin:/usr/sbin:/usr/bin");
if (retval)
goto exit;
kobject: don't block for each kobject_uevent Currently kobject_uevent has somewhat unpredictable semantics. The point is, since it may call a usermode helper and wait for it to execute (UMH_WAIT_EXEC), it is impossible to say for sure what lock dependencies it will introduce for the caller - strictly speaking it depends on what fs the binary is located on and the set of locks fork may take. There are quite a few kobject_uevent's users that do not take this into account and call it with various mutexes taken, e.g. rtnl_mutex, net_mutex, which might potentially lead to a deadlock. Since there is actually no reason to wait for the usermode helper to execute there, let's make kobject_uevent start the helper asynchronously with the aid of the UMH_NO_WAIT flag. Personally, I'm interested in this, because I really want kobject_uevent to be called under the slab_mutex in the slub implementation as it used to be some time ago, because it greatly simplifies synchronization and automatically fixes a kmemcg-related race. However, there was a deadlock detected on an attempt to call kobject_uevent under the slab_mutex (see https://lkml.org/lkml/2012/1/14/45), which was reported to be fixed by releasing the slab_mutex for kobject_uevent. Unfortunately, there was no information about who exactly blocked on the slab_mutex causing the usermode helper to stall, neither have I managed to find this out or reproduce the issue. BTW, this is not the first attempt to make kobject_uevent use UMH_NO_WAIT. Previous one was made by commit f520360d93cd ("kobject: don't block for each kobject_uevent"), but it was wrong (it passed arguments allocated on stack to async thread) so it was reverted in 05f54c13cd0c ("Revert "kobject: don't block for each kobject_uevent"."). It targeted on speeding up the boot process though. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg KH <greg@kroah.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:48:21 +08:00
retval = init_uevent_argv(env, subsystem);
if (retval)
goto exit;
kobject: don't block for each kobject_uevent Currently kobject_uevent has somewhat unpredictable semantics. The point is, since it may call a usermode helper and wait for it to execute (UMH_WAIT_EXEC), it is impossible to say for sure what lock dependencies it will introduce for the caller - strictly speaking it depends on what fs the binary is located on and the set of locks fork may take. There are quite a few kobject_uevent's users that do not take this into account and call it with various mutexes taken, e.g. rtnl_mutex, net_mutex, which might potentially lead to a deadlock. Since there is actually no reason to wait for the usermode helper to execute there, let's make kobject_uevent start the helper asynchronously with the aid of the UMH_NO_WAIT flag. Personally, I'm interested in this, because I really want kobject_uevent to be called under the slab_mutex in the slub implementation as it used to be some time ago, because it greatly simplifies synchronization and automatically fixes a kmemcg-related race. However, there was a deadlock detected on an attempt to call kobject_uevent under the slab_mutex (see https://lkml.org/lkml/2012/1/14/45), which was reported to be fixed by releasing the slab_mutex for kobject_uevent. Unfortunately, there was no information about who exactly blocked on the slab_mutex causing the usermode helper to stall, neither have I managed to find this out or reproduce the issue. BTW, this is not the first attempt to make kobject_uevent use UMH_NO_WAIT. Previous one was made by commit f520360d93cd ("kobject: don't block for each kobject_uevent"), but it was wrong (it passed arguments allocated on stack to async thread) so it was reverted in 05f54c13cd0c ("Revert "kobject: don't block for each kobject_uevent"."). It targeted on speeding up the boot process though. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Greg KH <greg@kroah.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:48:21 +08:00
retval = -ENOMEM;
info = call_usermodehelper_setup(env->argv[0], env->argv,
env->envp, GFP_KERNEL,
NULL, cleanup_uevent_env, env);
if (info) {
retval = call_usermodehelper_exec(info, UMH_NO_WAIT);
env = NULL; /* freed by cleanup_uevent_env */
}
}
#endif
exit:
kfree(devpath);
kfree(env);
return retval;
}
EXPORT_SYMBOL_GPL(kobject_uevent_env);
/**
* kobject_uevent - notify userspace by sending an uevent
*
* @kobj: struct kobject that the action is happening to
* @action: action that is happening
*
* Returns 0 if kobject_uevent() is completed with success or the
* corresponding error when it fails.
*/
int kobject_uevent(struct kobject *kobj, enum kobject_action action)
{
return kobject_uevent_env(kobj, action, NULL);
}
EXPORT_SYMBOL_GPL(kobject_uevent);
/**
* add_uevent_var - add key value string to the environment buffer
* @env: environment buffer structure
* @format: printf format for the key=value pair
*
* Returns 0 if environment variable was added successfully or -ENOMEM
* if no space was available.
*/
int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
{
va_list args;
int len;
if (env->envp_idx >= ARRAY_SIZE(env->envp)) {
WARN(1, KERN_ERR "add_uevent_var: too many keys\n");
return -ENOMEM;
}
va_start(args, format);
len = vsnprintf(&env->buf[env->buflen],
sizeof(env->buf) - env->buflen,
format, args);
va_end(args);
if (len >= (sizeof(env->buf) - env->buflen)) {
WARN(1, KERN_ERR "add_uevent_var: buffer size too small\n");
return -ENOMEM;
}
env->envp[env->envp_idx++] = &env->buf[env->buflen];
env->buflen += len + 1;
return 0;
}
EXPORT_SYMBOL_GPL(add_uevent_var);
#if defined(CONFIG_NET)
static int uevent_net_init(struct net *net)
{
struct uevent_sock *ue_sk;
struct netlink_kernel_cfg cfg = {
.groups = 1,
.flags = NL_CFG_F_NONROOT_RECV,
};
ue_sk = kzalloc(sizeof(*ue_sk), GFP_KERNEL);
if (!ue_sk)
return -ENOMEM;
ue_sk->sk = netlink_kernel_create(net, NETLINK_KOBJECT_UEVENT, &cfg);
if (!ue_sk->sk) {
printk(KERN_ERR
"kobject_uevent: unable to create netlink socket!\n");
kfree(ue_sk);
return -ENODEV;
}
net->uevent_sock = ue_sk;
mutex_lock(&uevent_sock_mutex);
list_add_tail(&ue_sk->list, &uevent_sock_list);
mutex_unlock(&uevent_sock_mutex);
return 0;
}
static void uevent_net_exit(struct net *net)
{
struct uevent_sock *ue_sk = net->uevent_sock;
mutex_lock(&uevent_sock_mutex);
list_del(&ue_sk->list);
mutex_unlock(&uevent_sock_mutex);
netlink_kernel_release(ue_sk->sk);
kfree(ue_sk);
}
static struct pernet_operations uevent_net_ops = {
.init = uevent_net_init,
.exit = uevent_net_exit,
.async = true,
};
static int __init kobject_uevent_init(void)
{
return register_pernet_subsys(&uevent_net_ops);
}
postcore_initcall(kobject_uevent_init);
#endif