p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/arch/arm/kernel/signal.c

789 lines
21 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* linux/arch/arm/kernel/signal.c
*
ARM: Fix signal restart issues with NX and OABI compat The signal restarting code was placed on the user stack when OABI compatibility is enabled. Unfortunately, with an EABI NX executable, this results in an attempt to run code from the non-executable stack, which segfaults the application. Fix this by placing the code in the vectors page, along side the signal return code, and directing the application to that code. Reported-by: saeed bishara <saeed.bishara@gmail.com> Tested-by: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-25 23:39:37 +08:00
* Copyright (C) 1995-2009 Russell King
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/personality.h>
[PATCH] Add include/linux/freezer.h and move definitions from sched.h Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 12:34:23 +08:00
#include <linux/freezer.h>
[ARM] Convert asm/uaccess.h to linux/uaccess.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-06 18:35:55 +08:00
#include <linux/uaccess.h>
KEYS: Add missing linux/tracehook.h #inclusions Add #inclusions of linux/tracehook.h to those arch files that had the tracehook call for TIF_NOTIFY_RESUME added when support for that flag was added to that arch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-09 15:30:21 +08:00
#include <linux/tracehook.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ARM] Include asm/elf.h instead of asm/procinfo.h These files want to provide/access ELF hwcap information, so should be including asm/elf.h rather than asm/procinfo.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-09 22:20:47 +08:00
#include <asm/elf.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/cacheflush.h>
#include <asm/ucontext.h>
#include <asm/unistd.h>
ARM: 6051/1: VFP: preserve the HW context when calling signal handlers From: Imre Deak <imre.deak@nokia.com> Signal handlers can use floating point, so prevent them to corrupt the main thread's VFP context. So far there were two signal stack frame formats defined based on the VFP implementation, but the user struct used for ptrace covers all posibilities, so use it for the signal stack too. Introduce also a new user struct for VFP exception registers. In this too fields not relevant to the current VFP architecture are ignored. Support to save / restore the exception registers was added by Will Deacon. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-11 22:58:27 +08:00
#include <asm/vfp.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "ptrace.h"
[PATCH] ARM: Move signal return code into vector page Move the signal return code into the vector page instead of placing it on the user mode stack, which will allow us to avoid flushing the instruction cache on signals, as well as eventually allowing non-exec stack. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-23 03:26:05 +08:00
#include "signal.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
/*
* For ARM syscalls, we encode the syscall number into the instruction.
*/
[ARM] 4870/1: fix signal return code when enable CONFIG_OABI_COMPAT fix signal return code when enable CONFIG_OABI_COMPAT Signed-off-by: Janboe Ye <janboe.ye@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-19 10:34:23 +08:00
#define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
#define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
ARM: Fix signal restart issues with NX and OABI compat The signal restarting code was placed on the user stack when OABI compatibility is enabled. Unfortunately, with an EABI NX executable, this results in an attempt to run code from the non-executable stack, which segfaults the application. Fix this by placing the code in the vectors page, along side the signal return code, and directing the application to that code. Reported-by: saeed bishara <saeed.bishara@gmail.com> Tested-by: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-25 23:39:37 +08:00
#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ARM] 3270/1: ARM EABI: fix sigreturn and rt_sigreturn Patch from Nicolas Pitre The signal return path consists of user code provided by the kernel. Since a syscall is used, it has to be updated to work with EABI. Noticed by Daniel Jacobowitz. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 06:38:47 +08:00
/*
* With EABI, the syscall number has to be loaded into r7.
*/
#define MOV_R7_NR_SIGRETURN (0xe3a07000 | (__NR_sigreturn - __NR_SYSCALL_BASE))
#define MOV_R7_NR_RT_SIGRETURN (0xe3a07000 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* For Thumb syscalls, we pass the syscall number via r7. We therefore
* need two 16-bit instructions.
*/
#define SWI_THUMB_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE))
#define SWI_THUMB_RT_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
[ARM] 3270/1: ARM EABI: fix sigreturn and rt_sigreturn Patch from Nicolas Pitre The signal return path consists of user code provided by the kernel. Since a syscall is used, it has to be updated to work with EABI. Noticed by Daniel Jacobowitz. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 06:38:47 +08:00
const unsigned long sigreturn_codes[7] = {
MOV_R7_NR_SIGRETURN, SWI_SYS_SIGRETURN, SWI_THUMB_SIGRETURN,
MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
ARM: Fix signal restart issues with NX and OABI compat The signal restarting code was placed on the user stack when OABI compatibility is enabled. Unfortunately, with an EABI NX executable, this results in an attempt to run code from the non-executable stack, which segfaults the application. Fix this by placing the code in the vectors page, along side the signal return code, and directing the application to that code. Reported-by: saeed bishara <saeed.bishara@gmail.com> Tested-by: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-25 23:39:37 +08:00
/*
* Either we support OABI only, or we have EABI with the OABI
* compat layer enabled. In the later case we don't know if
* user space is EABI or not, and if not we must not clobber r7.
* Always using the OABI syscall solves that issue and works for
* all those cases.
*/
const unsigned long syscall_restart_code[2] = {
SWI_SYS_RESTART, /* swi __NR_restart_syscall */
0xe49df004, /* ldr pc, [sp], #4 */
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* atomically swap in the new signal mask, and wait for a signal.
*/
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
mask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
current->saved_sigmask = current->blocked;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
siginitset(&current->blocked, mask);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
current->state = TASK_INTERRUPTIBLE;
schedule();
set_restore_sigmask();
return -ERESTARTNOHAND;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
asmlinkage int
sys_sigaction(int sig, const struct old_sigaction __user *act,
struct old_sigaction __user *oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
if (act) {
old_sigset_t mask;
if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
__get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
return -EFAULT;
__get_user(new_ka.sa.sa_flags, &act->sa_flags);
__get_user(mask, &act->sa_mask);
siginitset(&new_ka.sa.sa_mask, mask);
}
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
return -EFAULT;
__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
}
return ret;
}
[ARM] 3664/1: crunch: add signal frame save/restore Patch from Lennert Buytenhek This patch makes the kernel save Crunch state in userland signal frames, so that any userland signal handler can safely use the Crunch coprocessor without corrupting the Crunch state of the code it preempted. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 05:56:18 +08:00
#ifdef CONFIG_CRUNCH
ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCH preserve_crunch_context() calls __copy_to_user() which expects the destination address to be in __user space. setup_sigframe() properly passes the destination address. restore_crunch_context() calls __copy_from_user() which expects the source address to be in __user space. restore_sigframe() properly passes the source address. This fixes {preserve/restore}_crunch_context() to accept the address as __user space and resolves the following sparse warnings: arch/arm/kernel/signal.c:146:31: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:1>*to got struct crunch_sigframe *frame arch/arm/kernel/signal.c:156:38: warning: incorrect type in argument 2 (different address spaces) expected void const [noderef] <asn:1>*from got struct crunch_sigframe *frame arch/arm/kernel/signal.c:250:48: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> arch/arm/kernel/signal.c:365:49: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05 06:20:45 +08:00
static int preserve_crunch_context(struct crunch_sigframe __user *frame)
[ARM] 3664/1: crunch: add signal frame save/restore Patch from Lennert Buytenhek This patch makes the kernel save Crunch state in userland signal frames, so that any userland signal handler can safely use the Crunch coprocessor without corrupting the Crunch state of the code it preempted. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 05:56:18 +08:00
{
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;
/* the crunch context must be 64 bit aligned */
kframe = (struct crunch_sigframe *)((unsigned long)(kbuf + 8) & ~7);
kframe->magic = CRUNCH_MAGIC;
kframe->size = CRUNCH_STORAGE_SIZE;
crunch_task_copy(current_thread_info(), &kframe->storage);
return __copy_to_user(frame, kframe, sizeof(*frame));
}
ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCH preserve_crunch_context() calls __copy_to_user() which expects the destination address to be in __user space. setup_sigframe() properly passes the destination address. restore_crunch_context() calls __copy_from_user() which expects the source address to be in __user space. restore_sigframe() properly passes the source address. This fixes {preserve/restore}_crunch_context() to accept the address as __user space and resolves the following sparse warnings: arch/arm/kernel/signal.c:146:31: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:1>*to got struct crunch_sigframe *frame arch/arm/kernel/signal.c:156:38: warning: incorrect type in argument 2 (different address spaces) expected void const [noderef] <asn:1>*from got struct crunch_sigframe *frame arch/arm/kernel/signal.c:250:48: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> arch/arm/kernel/signal.c:365:49: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05 06:20:45 +08:00
static int restore_crunch_context(struct crunch_sigframe __user *frame)
[ARM] 3664/1: crunch: add signal frame save/restore Patch from Lennert Buytenhek This patch makes the kernel save Crunch state in userland signal frames, so that any userland signal handler can safely use the Crunch coprocessor without corrupting the Crunch state of the code it preempted. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 05:56:18 +08:00
{
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;
/* the crunch context must be 64 bit aligned */
kframe = (struct crunch_sigframe *)((unsigned long)(kbuf + 8) & ~7);
if (__copy_from_user(kframe, frame, sizeof(*frame)))
return -1;
if (kframe->magic != CRUNCH_MAGIC ||
kframe->size != CRUNCH_STORAGE_SIZE)
return -1;
crunch_task_restore(current_thread_info(), &kframe->storage);
return 0;
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_IWMMXT
static int preserve_iwmmxt_context(struct iwmmxt_sigframe *frame)
{
[PATCH] mm: arm ready for split ptlock Prepare arm for the split page_table_lock: three issues. Signal handling's preserve and restore of iwmmxt context currently involves reading and writing that context to and from user space, while holding page_table_lock to secure the user page(s) against kswapd. If we split the lock, then the structure might span two pages, secured by to read into and write from a kernel stack buffer, copying that out and in without locking (the structure is 160 bytes in size, and here we're near the top of the kernel stack). Or would the overhead be noticeable? arm_syscall's cmpxchg emulation use pte_offset_map_lock, instead of pte_offset_map and mm-wide page_table_lock; and strictly, it should now also take mmap_sem before descending to pmd, to guard against another thread munmapping, and the page table pulled out beneath this thread. Updated two comments in fault-armv.c. adjust_pte is interesting, since its modification of a pte in one part of the mm depends on the lock held when calling update_mmu_cache for a pte in some other part of that mm. This can't be done with a split page_table_lock (and we've already taken the lowest lock in the hierarchy here): so we'll have to disable split on arm, unless CONFIG_CPU_CACHE_VIPT to ensures adjust_pte never used. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 09:16:36 +08:00
char kbuf[sizeof(*frame) + 8];
struct iwmmxt_sigframe *kframe;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* the iWMMXt context must be 64 bit aligned */
[PATCH] mm: arm ready for split ptlock Prepare arm for the split page_table_lock: three issues. Signal handling's preserve and restore of iwmmxt context currently involves reading and writing that context to and from user space, while holding page_table_lock to secure the user page(s) against kswapd. If we split the lock, then the structure might span two pages, secured by to read into and write from a kernel stack buffer, copying that out and in without locking (the structure is 160 bytes in size, and here we're near the top of the kernel stack). Or would the overhead be noticeable? arm_syscall's cmpxchg emulation use pte_offset_map_lock, instead of pte_offset_map and mm-wide page_table_lock; and strictly, it should now also take mmap_sem before descending to pmd, to guard against another thread munmapping, and the page table pulled out beneath this thread. Updated two comments in fault-armv.c. adjust_pte is interesting, since its modification of a pte in one part of the mm depends on the lock held when calling update_mmu_cache for a pte in some other part of that mm. This can't be done with a split page_table_lock (and we've already taken the lowest lock in the hierarchy here): so we'll have to disable split on arm, unless CONFIG_CPU_CACHE_VIPT to ensures adjust_pte never used. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 09:16:36 +08:00
kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
[ARM] 3648/1: Update struct ucontext layout for coprocessor registers Patch from Daniel Jacobowitz In order for userspace to find saved coprocessor registers, move them from struct rt_sigframe into struct ucontext. Also allow space for glibc's sigset_t, so that userspace and kernelspace can use the same ucontext layout. Define the magic numbers for iWMMXt in the header file for easier reference. Include the size of the coprocessor data in the magic numbers. Also define magic numbers and layout for VFP, not yet saved. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 06:46:21 +08:00
kframe->magic = IWMMXT_MAGIC;
kframe->size = IWMMXT_STORAGE_SIZE;
[PATCH] mm: arm ready for split ptlock Prepare arm for the split page_table_lock: three issues. Signal handling's preserve and restore of iwmmxt context currently involves reading and writing that context to and from user space, while holding page_table_lock to secure the user page(s) against kswapd. If we split the lock, then the structure might span two pages, secured by to read into and write from a kernel stack buffer, copying that out and in without locking (the structure is 160 bytes in size, and here we're near the top of the kernel stack). Or would the overhead be noticeable? arm_syscall's cmpxchg emulation use pte_offset_map_lock, instead of pte_offset_map and mm-wide page_table_lock; and strictly, it should now also take mmap_sem before descending to pmd, to guard against another thread munmapping, and the page table pulled out beneath this thread. Updated two comments in fault-armv.c. adjust_pte is interesting, since its modification of a pte in one part of the mm depends on the lock held when calling update_mmu_cache for a pte in some other part of that mm. This can't be done with a split page_table_lock (and we've already taken the lowest lock in the hierarchy here): so we'll have to disable split on arm, unless CONFIG_CPU_CACHE_VIPT to ensures adjust_pte never used. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 09:16:36 +08:00
iwmmxt_task_copy(current_thread_info(), &kframe->storage);
return __copy_to_user(frame, kframe, sizeof(*frame));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
{
[PATCH] mm: arm ready for split ptlock Prepare arm for the split page_table_lock: three issues. Signal handling's preserve and restore of iwmmxt context currently involves reading and writing that context to and from user space, while holding page_table_lock to secure the user page(s) against kswapd. If we split the lock, then the structure might span two pages, secured by to read into and write from a kernel stack buffer, copying that out and in without locking (the structure is 160 bytes in size, and here we're near the top of the kernel stack). Or would the overhead be noticeable? arm_syscall's cmpxchg emulation use pte_offset_map_lock, instead of pte_offset_map and mm-wide page_table_lock; and strictly, it should now also take mmap_sem before descending to pmd, to guard against another thread munmapping, and the page table pulled out beneath this thread. Updated two comments in fault-armv.c. adjust_pte is interesting, since its modification of a pte in one part of the mm depends on the lock held when calling update_mmu_cache for a pte in some other part of that mm. This can't be done with a split page_table_lock (and we've already taken the lowest lock in the hierarchy here): so we'll have to disable split on arm, unless CONFIG_CPU_CACHE_VIPT to ensures adjust_pte never used. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 09:16:36 +08:00
char kbuf[sizeof(*frame) + 8];
struct iwmmxt_sigframe *kframe;
/* the iWMMXt context must be 64 bit aligned */
kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
if (__copy_from_user(kframe, frame, sizeof(*frame)))
return -1;
[ARM] 3648/1: Update struct ucontext layout for coprocessor registers Patch from Daniel Jacobowitz In order for userspace to find saved coprocessor registers, move them from struct rt_sigframe into struct ucontext. Also allow space for glibc's sigset_t, so that userspace and kernelspace can use the same ucontext layout. Define the magic numbers for iWMMXt in the header file for easier reference. Include the size of the coprocessor data in the magic numbers. Also define magic numbers and layout for VFP, not yet saved. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 06:46:21 +08:00
if (kframe->magic != IWMMXT_MAGIC ||
kframe->size != IWMMXT_STORAGE_SIZE)
[PATCH] mm: arm ready for split ptlock Prepare arm for the split page_table_lock: three issues. Signal handling's preserve and restore of iwmmxt context currently involves reading and writing that context to and from user space, while holding page_table_lock to secure the user page(s) against kswapd. If we split the lock, then the structure might span two pages, secured by to read into and write from a kernel stack buffer, copying that out and in without locking (the structure is 160 bytes in size, and here we're near the top of the kernel stack). Or would the overhead be noticeable? arm_syscall's cmpxchg emulation use pte_offset_map_lock, instead of pte_offset_map and mm-wide page_table_lock; and strictly, it should now also take mmap_sem before descending to pmd, to guard against another thread munmapping, and the page table pulled out beneath this thread. Updated two comments in fault-armv.c. adjust_pte is interesting, since its modification of a pte in one part of the mm depends on the lock held when calling update_mmu_cache for a pte in some other part of that mm. This can't be done with a split page_table_lock (and we've already taken the lowest lock in the hierarchy here): so we'll have to disable split on arm, unless CONFIG_CPU_CACHE_VIPT to ensures adjust_pte never used. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 09:16:36 +08:00
return -1;
iwmmxt_task_restore(current_thread_info(), &kframe->storage);
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
#endif
ARM: 6051/1: VFP: preserve the HW context when calling signal handlers From: Imre Deak <imre.deak@nokia.com> Signal handlers can use floating point, so prevent them to corrupt the main thread's VFP context. So far there were two signal stack frame formats defined based on the VFP implementation, but the user struct used for ptrace covers all posibilities, so use it for the signal stack too. Introduce also a new user struct for VFP exception registers. In this too fields not relevant to the current VFP architecture are ignored. Support to save / restore the exception registers was added by Will Deacon. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-11 22:58:27 +08:00
#ifdef CONFIG_VFP
static int preserve_vfp_context(struct vfp_sigframe __user *frame)
{
struct thread_info *thread = current_thread_info();
struct vfp_hard_struct *h = &thread->vfpstate.hard;
const unsigned long magic = VFP_MAGIC;
const unsigned long size = VFP_STORAGE_SIZE;
int err = 0;
vfp_sync_hwstate(thread);
__put_user_error(magic, &frame->magic, err);
__put_user_error(size, &frame->size, err);
/*
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
*/
err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
sizeof(h->fpregs));
/*
* Copy the status and control register.
*/
__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
/*
* Copy the exception registers.
*/
__put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
__put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
__put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
return err ? -EFAULT : 0;
}
static int restore_vfp_context(struct vfp_sigframe __user *frame)
{
struct thread_info *thread = current_thread_info();
struct vfp_hard_struct *h = &thread->vfpstate.hard;
unsigned long magic;
unsigned long size;
unsigned long fpexc;
int err = 0;
__get_user_error(magic, &frame->magic, err);
__get_user_error(size, &frame->size, err);
if (err)
return -EFAULT;
if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
return -EINVAL;
/*
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
*/
err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
sizeof(h->fpregs));
/*
* Copy the status and control register.
*/
__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
/*
* Sanitise and restore the exception registers.
*/
__get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
/* Ensure the VFP is enabled. */
fpexc |= FPEXC_EN;
/* Ensure FPINST2 is invalid and the exception flag is cleared. */
fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
h->fpexc = fpexc;
__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
if (!err)
vfp_flush_hwstate(thread);
return err ? -EFAULT : 0;
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Do a signal return; undo the signal stack. These are aligned to 64-bit.
*/
struct sigframe {
[ARM] Merge sigcontext and sigmask members of sigframe ucontext contains both the sigcontext and sigmask structures, and is also used for rt signal contexts. Re-use this structure for non-rt signals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:13:25 +08:00
struct ucontext uc;
[ARM] 3270/1: ARM EABI: fix sigreturn and rt_sigreturn Patch from Nicolas Pitre The signal return path consists of user code provided by the kernel. Since a syscall is used, it has to be updated to work with EABI. Noticed by Daniel Jacobowitz. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 06:38:47 +08:00
unsigned long retcode[2];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
struct rt_sigframe {
struct siginfo info;
[ARM] Re-use sigframe within rt_sigframe sigframe is now a contained subset of rt_sigframe, so we can start to re-use code which accesses sigframe data for both rt and non-rt signals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:18:25 +08:00
struct sigframe sig;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
[ARM] Gather common sigframe restoration code into restore_sigframe() Gather the sigmask restoration code inside restore_sigcontext(), and rename the function restore_sigframe(). Pass it a sigframe structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:23:02 +08:00
static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ARM] 3648/1: Update struct ucontext layout for coprocessor registers Patch from Daniel Jacobowitz In order for userspace to find saved coprocessor registers, move them from struct rt_sigframe into struct ucontext. Also allow space for glibc's sigset_t, so that userspace and kernelspace can use the same ucontext layout. Define the magic numbers for iWMMXt in the header file for easier reference. Include the size of the coprocessor data in the magic numbers. Also define magic numbers and layout for VFP, not yet saved. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 06:46:21 +08:00
struct aux_sigframe __user *aux;
[ARM] Gather common sigframe restoration code into restore_sigframe() Gather the sigmask restoration code inside restore_sigcontext(), and rename the function restore_sigframe(). Pass it a sigframe structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:23:02 +08:00
sigset_t set;
int err;
err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
if (err == 0) {
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ARM] Gather common sigframe restoration code into restore_sigframe() Gather the sigmask restoration code inside restore_sigcontext(), and rename the function restore_sigframe(). Pass it a sigframe structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:23:02 +08:00
__get_user_error(regs->ARM_r0, &sf->uc.uc_mcontext.arm_r0, err);
__get_user_error(regs->ARM_r1, &sf->uc.uc_mcontext.arm_r1, err);
__get_user_error(regs->ARM_r2, &sf->uc.uc_mcontext.arm_r2, err);
__get_user_error(regs->ARM_r3, &sf->uc.uc_mcontext.arm_r3, err);
__get_user_error(regs->ARM_r4, &sf->uc.uc_mcontext.arm_r4, err);
__get_user_error(regs->ARM_r5, &sf->uc.uc_mcontext.arm_r5, err);
__get_user_error(regs->ARM_r6, &sf->uc.uc_mcontext.arm_r6, err);
__get_user_error(regs->ARM_r7, &sf->uc.uc_mcontext.arm_r7, err);
__get_user_error(regs->ARM_r8, &sf->uc.uc_mcontext.arm_r8, err);
__get_user_error(regs->ARM_r9, &sf->uc.uc_mcontext.arm_r9, err);
__get_user_error(regs->ARM_r10, &sf->uc.uc_mcontext.arm_r10, err);
__get_user_error(regs->ARM_fp, &sf->uc.uc_mcontext.arm_fp, err);
__get_user_error(regs->ARM_ip, &sf->uc.uc_mcontext.arm_ip, err);
__get_user_error(regs->ARM_sp, &sf->uc.uc_mcontext.arm_sp, err);
__get_user_error(regs->ARM_lr, &sf->uc.uc_mcontext.arm_lr, err);
__get_user_error(regs->ARM_pc, &sf->uc.uc_mcontext.arm_pc, err);
__get_user_error(regs->ARM_cpsr, &sf->uc.uc_mcontext.arm_cpsr, err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= !valid_user_regs(regs);
[ARM] 3648/1: Update struct ucontext layout for coprocessor registers Patch from Daniel Jacobowitz In order for userspace to find saved coprocessor registers, move them from struct rt_sigframe into struct ucontext. Also allow space for glibc's sigset_t, so that userspace and kernelspace can use the same ucontext layout. Define the magic numbers for iWMMXt in the header file for easier reference. Include the size of the coprocessor data in the magic numbers. Also define magic numbers and layout for VFP, not yet saved. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 06:46:21 +08:00
aux = (struct aux_sigframe __user *) sf->uc.uc_regspace;
[ARM] 3664/1: crunch: add signal frame save/restore Patch from Lennert Buytenhek This patch makes the kernel save Crunch state in userland signal frames, so that any userland signal handler can safely use the Crunch coprocessor without corrupting the Crunch state of the code it preempted. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 05:56:18 +08:00
#ifdef CONFIG_CRUNCH
if (err == 0)
err |= restore_crunch_context(&aux->crunch);
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_IWMMXT
if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
err |= restore_iwmmxt_context(&aux->iwmmxt);
#endif
#ifdef CONFIG_VFP
ARM: 6051/1: VFP: preserve the HW context when calling signal handlers From: Imre Deak <imre.deak@nokia.com> Signal handlers can use floating point, so prevent them to corrupt the main thread's VFP context. So far there were two signal stack frame formats defined based on the VFP implementation, but the user struct used for ptrace covers all posibilities, so use it for the signal stack too. Introduce also a new user struct for VFP exception registers. In this too fields not relevant to the current VFP architecture are ignored. Support to save / restore the exception registers was added by Will Deacon. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-11 22:58:27 +08:00
if (err == 0)
err |= restore_vfp_context(&aux->vfp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
return err;
}
asmlinkage int sys_sigreturn(struct pt_regs *regs)
{
struct sigframe __user *frame;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
/*
* Since we stacked the signal on a 64-bit boundary,
* then 'sp' should be word aligned here. If it's
* not, then the user is trying to mess with us.
*/
if (regs->ARM_sp & 7)
goto badframe;
frame = (struct sigframe __user *)regs->ARM_sp;
if (!access_ok(VERIFY_READ, frame, sizeof (*frame)))
goto badframe;
[ARM] Gather common sigframe restoration code into restore_sigframe() Gather the sigmask restoration code inside restore_sigcontext(), and rename the function restore_sigframe(). Pass it a sigframe structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:23:02 +08:00
if (restore_sigframe(regs, frame))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto badframe;
[ARM] ptrace: clean up single stepping support Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-04 17:50:28 +08:00
single_step_trap(current);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return regs->ARM_r0;
badframe:
force_sig(SIGSEGV, current);
return 0;
}
asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
/*
* Since we stacked the signal on a 64-bit boundary,
* then 'sp' should be word aligned here. If it's
* not, then the user is trying to mess with us.
*/
if (regs->ARM_sp & 7)
goto badframe;
frame = (struct rt_sigframe __user *)regs->ARM_sp;
if (!access_ok(VERIFY_READ, frame, sizeof (*frame)))
goto badframe;
[ARM] Gather common sigframe restoration code into restore_sigframe() Gather the sigmask restoration code inside restore_sigcontext(), and rename the function restore_sigframe(). Pass it a sigframe structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:23:02 +08:00
if (restore_sigframe(regs, &frame->sig))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto badframe;
[ARM] Re-use sigframe within rt_sigframe sigframe is now a contained subset of rt_sigframe, so we can start to re-use code which accesses sigframe data for both rt and non-rt signals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:18:25 +08:00
if (do_sigaltstack(&frame->sig.uc.uc_stack, NULL, regs->ARM_sp) == -EFAULT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto badframe;
[ARM] ptrace: clean up single stepping support Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-04 17:50:28 +08:00
single_step_trap(current);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return regs->ARM_r0;
badframe:
force_sig(SIGSEGV, current);
return 0;
}
static int
[ARM] Gather common sigframe saving code into setup_sigframe() Gather the common sigmask savbing code inside setup_sigcontext(), and rename the function setup_sigframe(). Pass it a sigframe structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:28:03 +08:00
setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ARM] 3648/1: Update struct ucontext layout for coprocessor registers Patch from Daniel Jacobowitz In order for userspace to find saved coprocessor registers, move them from struct rt_sigframe into struct ucontext. Also allow space for glibc's sigset_t, so that userspace and kernelspace can use the same ucontext layout. Define the magic numbers for iWMMXt in the header file for easier reference. Include the size of the coprocessor data in the magic numbers. Also define magic numbers and layout for VFP, not yet saved. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 06:46:21 +08:00
struct aux_sigframe __user *aux;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int err = 0;
[ARM] Gather common sigframe saving code into setup_sigframe() Gather the common sigmask savbing code inside setup_sigcontext(), and rename the function setup_sigframe(). Pass it a sigframe structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:28:03 +08:00
__put_user_error(regs->ARM_r0, &sf->uc.uc_mcontext.arm_r0, err);
__put_user_error(regs->ARM_r1, &sf->uc.uc_mcontext.arm_r1, err);
__put_user_error(regs->ARM_r2, &sf->uc.uc_mcontext.arm_r2, err);
__put_user_error(regs->ARM_r3, &sf->uc.uc_mcontext.arm_r3, err);
__put_user_error(regs->ARM_r4, &sf->uc.uc_mcontext.arm_r4, err);
__put_user_error(regs->ARM_r5, &sf->uc.uc_mcontext.arm_r5, err);
__put_user_error(regs->ARM_r6, &sf->uc.uc_mcontext.arm_r6, err);
__put_user_error(regs->ARM_r7, &sf->uc.uc_mcontext.arm_r7, err);
__put_user_error(regs->ARM_r8, &sf->uc.uc_mcontext.arm_r8, err);
__put_user_error(regs->ARM_r9, &sf->uc.uc_mcontext.arm_r9, err);
__put_user_error(regs->ARM_r10, &sf->uc.uc_mcontext.arm_r10, err);
__put_user_error(regs->ARM_fp, &sf->uc.uc_mcontext.arm_fp, err);
__put_user_error(regs->ARM_ip, &sf->uc.uc_mcontext.arm_ip, err);
__put_user_error(regs->ARM_sp, &sf->uc.uc_mcontext.arm_sp, err);
__put_user_error(regs->ARM_lr, &sf->uc.uc_mcontext.arm_lr, err);
__put_user_error(regs->ARM_pc, &sf->uc.uc_mcontext.arm_pc, err);
__put_user_error(regs->ARM_cpsr, &sf->uc.uc_mcontext.arm_cpsr, err);
__put_user_error(current->thread.trap_no, &sf->uc.uc_mcontext.trap_no, err);
__put_user_error(current->thread.error_code, &sf->uc.uc_mcontext.error_code, err);
__put_user_error(current->thread.address, &sf->uc.uc_mcontext.fault_address, err);
__put_user_error(set->sig[0], &sf->uc.uc_mcontext.oldmask, err);
err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ARM] 3648/1: Update struct ucontext layout for coprocessor registers Patch from Daniel Jacobowitz In order for userspace to find saved coprocessor registers, move them from struct rt_sigframe into struct ucontext. Also allow space for glibc's sigset_t, so that userspace and kernelspace can use the same ucontext layout. Define the magic numbers for iWMMXt in the header file for easier reference. Include the size of the coprocessor data in the magic numbers. Also define magic numbers and layout for VFP, not yet saved. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 06:46:21 +08:00
aux = (struct aux_sigframe __user *) sf->uc.uc_regspace;
[ARM] 3664/1: crunch: add signal frame save/restore Patch from Lennert Buytenhek This patch makes the kernel save Crunch state in userland signal frames, so that any userland signal handler can safely use the Crunch coprocessor without corrupting the Crunch state of the code it preempted. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 05:56:18 +08:00
#ifdef CONFIG_CRUNCH
if (err == 0)
err |= preserve_crunch_context(&aux->crunch);
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_IWMMXT
if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
err |= preserve_iwmmxt_context(&aux->iwmmxt);
#endif
#ifdef CONFIG_VFP
ARM: 6051/1: VFP: preserve the HW context when calling signal handlers From: Imre Deak <imre.deak@nokia.com> Signal handlers can use floating point, so prevent them to corrupt the main thread's VFP context. So far there were two signal stack frame formats defined based on the VFP implementation, but the user struct used for ptrace covers all posibilities, so use it for the signal stack too. Introduce also a new user struct for VFP exception registers. In this too fields not relevant to the current VFP architecture are ignored. Support to save / restore the exception registers was added by Will Deacon. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-11 22:58:27 +08:00
if (err == 0)
err |= preserve_vfp_context(&aux->vfp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
[ARM] 3648/1: Update struct ucontext layout for coprocessor registers Patch from Daniel Jacobowitz In order for userspace to find saved coprocessor registers, move them from struct rt_sigframe into struct ucontext. Also allow space for glibc's sigset_t, so that userspace and kernelspace can use the same ucontext layout. Define the magic numbers for iWMMXt in the header file for easier reference. Include the size of the coprocessor data in the magic numbers. Also define magic numbers and layout for VFP, not yet saved. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 06:46:21 +08:00
__put_user_error(0, &aux->end_magic, err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return err;
}
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, int framesize)
{
unsigned long sp = regs->ARM_sp;
void __user *frame;
/*
* This is the X/Open sanctioned signal stack switching.
*/
if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp))
sp = current->sas_ss_sp + current->sas_ss_size;
/*
* ATPCS B01 mandates 8-byte alignment
*/
frame = (void __user *)((sp - framesize) & ~7);
/*
* Check that we can actually write to the signal frame.
*/
if (!access_ok(VERIFY_WRITE, frame, framesize))
frame = NULL;
return frame;
}
static int
setup_return(struct pt_regs *regs, struct k_sigaction *ka,
unsigned long __user *rc, void __user *frame, int usig)
{
unsigned long handler = (unsigned long)ka->sa.sa_handler;
unsigned long retcode;
int thumb = 0;
unsigned long cpsr = regs->ARM_cpsr & ~PSR_f;
/*
* Maybe we need to deliver a 32-bit signal to a 26-bit task.
*/
if (ka->sa.sa_flags & SA_THIRTYTWO)
cpsr = (cpsr & ~MODE_MASK) | USR_MODE;
#ifdef CONFIG_ARM_THUMB
if (elf_hwcap & HWCAP_THUMB) {
/*
* The LSB of the handler determines if we're going to
* be using THUMB or ARM mode for this signal handler.
*/
thumb = handler & 1;
Clear the IT state when invoking a Thumb-2 signal handler If a process is interrupted during an If-Then block and a signal is invoked, the ITSTATE bits must be cleared otherwise the handler would not run correctly. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Joseph S. Myers <joseph@codesourcery.com>
2009-05-30 21:00:15 +08:00
if (thumb) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
cpsr |= PSR_T_BIT;
Clear the IT state when invoking a Thumb-2 signal handler If a process is interrupted during an If-Then block and a signal is invoked, the ITSTATE bits must be cleared otherwise the handler would not run correctly. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Joseph S. Myers <joseph@codesourcery.com>
2009-05-30 21:00:15 +08:00
#if __LINUX_ARM_ARCH__ >= 7
/* clear the If-Then Thumb-2 execution state */
cpsr &= ~PSR_IT_MASK;
#endif
} else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
cpsr &= ~PSR_T_BIT;
}
#endif
if (ka->sa.sa_flags & SA_RESTORER) {
retcode = (unsigned long)ka->sa.sa_restorer;
} else {
[ARM] 3270/1: ARM EABI: fix sigreturn and rt_sigreturn Patch from Nicolas Pitre The signal return path consists of user code provided by the kernel. Since a syscall is used, it has to be updated to work with EABI. Noticed by Daniel Jacobowitz. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 06:38:47 +08:00
unsigned int idx = thumb << 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (ka->sa.sa_flags & SA_SIGINFO)
[ARM] 3270/1: ARM EABI: fix sigreturn and rt_sigreturn Patch from Nicolas Pitre The signal return path consists of user code provided by the kernel. Since a syscall is used, it has to be updated to work with EABI. Noticed by Daniel Jacobowitz. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 06:38:47 +08:00
idx += 3;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ARM] 3270/1: ARM EABI: fix sigreturn and rt_sigreturn Patch from Nicolas Pitre The signal return path consists of user code provided by the kernel. Since a syscall is used, it has to be updated to work with EABI. Noticed by Daniel Jacobowitz. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 06:38:47 +08:00
if (__put_user(sigreturn_codes[idx], rc) ||
__put_user(sigreturn_codes[idx+1], rc+1))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 1;
[PATCH] ARM: Move signal return code into vector page Move the signal return code into the vector page instead of placing it on the user mode stack, which will allow us to avoid flushing the instruction cache on signals, as well as eventually allowing non-exec stack. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-23 03:26:05 +08:00
if (cpsr & MODE32_BIT) {
/*
* 32-bit code can use the new high-page
* signal return code support.
*/
retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb;
} else {
/*
* Ensure that the instruction cache sees
* the return code written onto the stack.
*/
flush_icache_range((unsigned long)rc,
[ARM] 3270/1: ARM EABI: fix sigreturn and rt_sigreturn Patch from Nicolas Pitre The signal return path consists of user code provided by the kernel. Since a syscall is used, it has to be updated to work with EABI. Noticed by Daniel Jacobowitz. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 06:38:47 +08:00
(unsigned long)(rc + 2));
[PATCH] ARM: Move signal return code into vector page Move the signal return code into the vector page instead of placing it on the user mode stack, which will allow us to avoid flushing the instruction cache on signals, as well as eventually allowing non-exec stack. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-23 03:26:05 +08:00
retcode = ((unsigned long)rc) + thumb;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
regs->ARM_r0 = usig;
regs->ARM_sp = (unsigned long)frame;
regs->ARM_lr = retcode;
regs->ARM_pc = handler;
regs->ARM_cpsr = cpsr;
return 0;
}
static int
setup_frame(int usig, struct k_sigaction *ka, sigset_t *set, struct pt_regs *regs)
{
struct sigframe __user *frame = get_sigframe(ka, regs, sizeof(*frame));
int err = 0;
if (!frame)
return 1;
[ARM] Add identifying number for non-rt sigframe GDB couldn't reliably tell the difference between the old and new non-rt sigframes, so provide it with a number at the beginning which will never appear in the old sigframe, and hence provide gdb with a reliable way to tell the two apart. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 05:41:09 +08:00
/*
* Set uc.uc_flags to a value which sc.trap_no would never have.
*/
__put_user_error(0x5ac3c35a, &frame->uc.uc_flags, err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ARM] Gather common sigframe saving code into setup_sigframe() Gather the common sigmask savbing code inside setup_sigcontext(), and rename the function setup_sigframe(). Pass it a sigframe structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:28:03 +08:00
err |= setup_sigframe(frame, regs, set);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (err == 0)
[ARM] 3270/1: ARM EABI: fix sigreturn and rt_sigreturn Patch from Nicolas Pitre The signal return path consists of user code provided by the kernel. Since a syscall is used, it has to be updated to work with EABI. Noticed by Daniel Jacobowitz. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 06:38:47 +08:00
err = setup_return(regs, ka, frame->retcode, frame, usig);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return err;
}
static int
setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame = get_sigframe(ka, regs, sizeof(*frame));
stack_t stack;
int err = 0;
if (!frame)
return 1;
err |= copy_siginfo_to_user(&frame->info, info);
[ARM] Re-use sigframe within rt_sigframe sigframe is now a contained subset of rt_sigframe, so we can start to re-use code which accesses sigframe data for both rt and non-rt signals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:18:25 +08:00
__put_user_error(0, &frame->sig.uc.uc_flags, err);
__put_user_error(NULL, &frame->sig.uc.uc_link, err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
memset(&stack, 0, sizeof(stack));
stack.ss_sp = (void __user *)current->sas_ss_sp;
stack.ss_flags = sas_ss_flags(regs->ARM_sp);
stack.ss_size = current->sas_ss_size;
[ARM] Re-use sigframe within rt_sigframe sigframe is now a contained subset of rt_sigframe, so we can start to re-use code which accesses sigframe data for both rt and non-rt signals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:18:25 +08:00
err |= __copy_to_user(&frame->sig.uc.uc_stack, &stack, sizeof(stack));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ARM] Gather common sigframe saving code into setup_sigframe() Gather the common sigmask savbing code inside setup_sigcontext(), and rename the function setup_sigframe(). Pass it a sigframe structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:28:03 +08:00
err |= setup_sigframe(&frame->sig, regs, set);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (err == 0)
[ARM] Re-use sigframe within rt_sigframe sigframe is now a contained subset of rt_sigframe, so we can start to re-use code which accesses sigframe data for both rt and non-rt signals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:18:25 +08:00
err = setup_return(regs, ka, frame->sig.retcode, frame, usig);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (err == 0) {
/*
* For realtime signals we must also set the second and third
* arguments for the signal handler.
* -- Peter Maydell <pmaydell@chiark.greenend.org.uk> 2000-12-06
*/
regs->ARM_r1 = (unsigned long)&frame->info;
[ARM] Re-use sigframe within rt_sigframe sigframe is now a contained subset of rt_sigframe, so we can start to re-use code which accesses sigframe data for both rt and non-rt signals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-16 03:18:25 +08:00
regs->ARM_r2 = (unsigned long)&frame->sig.uc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
return err;
}
syscall: Sort out syscall_restart name clash. Stephen Rothwell <sfr@canb.auug.org.au> writes: > Today's linux-next build of at least some av32 and arm configs failed like this: > > arch/avr32/kernel/signal.c:216: error: conflicting types for 'restart_syscall' > include/linux/sched.h:2184: error: previous definition of 'restart_syscall' was here > > Caused by commit 690cc3ffe33ac4a2857583c22d4c6244ae11684d ("syscall: > Implement a convinience function restart_syscall") from the net tree. Grrr. Some days it feels like all of the good names are already taken. Let's just rename the two static users in arm and avr32 to get this sorted out. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 06:52:40 +08:00
static inline void setup_syscall_restart(struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
regs->ARM_r0 = regs->ARM_ORIG_r0;
regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
}
/*
* OK, we're invoking a handler
*/
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
static int
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, int syscall)
{
struct thread_info *thread = current_thread_info();
struct task_struct *tsk = current;
int usig = sig;
int ret;
/*
* If we were from a system call, check for system call restarting...
*/
if (syscall) {
switch (regs->ARM_r0) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->ARM_r0 = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->ARM_r0 = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
syscall: Sort out syscall_restart name clash. Stephen Rothwell <sfr@canb.auug.org.au> writes: > Today's linux-next build of at least some av32 and arm configs failed like this: > > arch/avr32/kernel/signal.c:216: error: conflicting types for 'restart_syscall' > include/linux/sched.h:2184: error: previous definition of 'restart_syscall' was here > > Caused by commit 690cc3ffe33ac4a2857583c22d4c6244ae11684d ("syscall: > Implement a convinience function restart_syscall") from the net tree. Grrr. Some days it feels like all of the good names are already taken. Let's just rename the two static users in arm and avr32 to get this sorted out. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 06:52:40 +08:00
setup_syscall_restart(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
/*
* translate the signal
*/
if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap)
usig = thread->exec_domain->signal_invmap[usig];
/*
* Set up the stack frame
*/
if (ka->sa.sa_flags & SA_SIGINFO)
ret = setup_rt_frame(usig, ka, info, oldset, regs);
else
ret = setup_frame(usig, ka, oldset, regs);
/*
* Check that the resulting registers are actually sane.
*/
ret |= !valid_user_regs(regs);
[PATCH] convert signal handling of NODEFER to act like other Unix boxes. It has been reported that the way Linux handles NODEFER for signals is not consistent with the way other Unix boxes handle it. I've written a program to test the behavior of how this flag affects signals and had several reports from people who ran this on various Unix boxes, confirming that Linux seems to be unique on the way this is handled. The way NODEFER affects signals on other Unix boxes is as follows: 1) If NODEFER is set, other signals in sa_mask are still blocked. 2) If NODEFER is set and the signal is in sa_mask, then the signal is still blocked. (Note: this is the behavior of all tested but Linux _and_ NetBSD 2.0 *). The way NODEFER affects signals on Linux: 1) If NODEFER is set, other signals are _not_ blocked regardless of sa_mask (Even NetBSD doesn't do this). 2) If NODEFER is set and the signal is in sa_mask, then the signal being handled is not blocked. The patch converts signal handling in all current Linux architectures to the way most Unix boxes work. Unix boxes that were tested: DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU 3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX. * NetBSD was the only other Unix to behave like Linux on point #2. The main concern was brought up by point #1 which even NetBSD isn't like Linux. So with this patch, we leave NetBSD as the lonely one that behaves differently here with #2. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29 23:44:09 +08:00
if (ret != 0) {
[ARM] 3168/1: Update ARM signal delivery and masking Patch from Daniel Jacobowitz After delivering a signal (creating its stack frame) we must check for additional pending unblocked signals before returning to userspace. Otherwise signals may be delayed past the next syscall or reschedule. Once that was fixed it became obvious that the ARM signal mask manipulation was broken. It was a little bit broken before the recent SA_NODEFER changes, and then very broken after them. We must block the requested signals before starting the handler or the same signal can be delivered again before the handler even gets a chance to run. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-19 18:01:07 +08:00
force_sigsegv(sig, tsk);
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[ARM] 3168/1: Update ARM signal delivery and masking Patch from Daniel Jacobowitz After delivering a signal (creating its stack frame) we must check for additional pending unblocked signals before returning to userspace. Otherwise signals may be delayed past the next syscall or reschedule. Once that was fixed it became obvious that the ARM signal mask manipulation was broken. It was a little bit broken before the recent SA_NODEFER changes, and then very broken after them. We must block the requested signals before starting the handler or the same signal can be delivered again before the handler even gets a chance to run. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-19 18:01:07 +08:00
/*
* Block the signal if we were successful.
*/
spin_lock_irq(&tsk->sighand->siglock);
sigorsets(&tsk->blocked, &tsk->blocked,
&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&tsk->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
static void do_signal(struct pt_regs *regs, int syscall)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct k_sigaction ka;
siginfo_t info;
int signr;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] arm: swsusp build fix Another swsusp fixup. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 18:27:21 +08:00
if (try_to_freeze())
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto no_signal;
[ARM] ptrace: clean up single stepping support Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-04 17:50:28 +08:00
single_step_clear(current);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
sigset_t *oldset;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = &current->saved_sigmask;
else
oldset = &current->blocked;
if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
/*
* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TIF_RESTORE_SIGMASK flag.
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
[ARM] ptrace: clean up single stepping support Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-04 17:50:28 +08:00
single_step_set(current);
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
no_signal:
/*
* No signal to deliver to the process - restart the syscall.
*/
if (syscall) {
if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
if (thumb_mode(regs)) {
[ARM] 3626/1: ARM EABI: fix syscall restarting Patch from Nicolas Pitre The RESTARTBLOCK case currently store some code on the stack to invoke sys_restart_syscall. However this is ABI dependent and there is a mismatch with the way __NR_restart_syscall gets defined when the kernel is compiled for EABI. There is also a long standing bug in the thumb case since with OABI the __NR_restart_syscall value includes __NR_SYSCALL_BASE which should not be the case for Thumb syscalls. Credits to Yauheni Kaliuta <yauheni.kaliuta@gmail.com> for finding the EABI bug. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-23 05:18:45 +08:00
regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
regs->ARM_pc -= 2;
} else {
[ARM] 3626/1: ARM EABI: fix syscall restarting Patch from Nicolas Pitre The RESTARTBLOCK case currently store some code on the stack to invoke sys_restart_syscall. However this is ABI dependent and there is a mismatch with the way __NR_restart_syscall gets defined when the kernel is compiled for EABI. There is also a long standing bug in the thumb case since with OABI the __NR_restart_syscall value includes __NR_SYSCALL_BASE which should not be the case for Thumb syscalls. Credits to Yauheni Kaliuta <yauheni.kaliuta@gmail.com> for finding the EABI bug. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-23 05:18:45 +08:00
#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
regs->ARM_r7 = __NR_restart_syscall;
regs->ARM_pc -= 4;
#else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u32 __user *usp;
ARM: Fix signal restart issues with NX and OABI compat The signal restarting code was placed on the user stack when OABI compatibility is enabled. Unfortunately, with an EABI NX executable, this results in an attempt to run code from the non-executable stack, which segfaults the application. Fix this by placing the code in the vectors page, along side the signal return code, and directing the application to that code. Reported-by: saeed bishara <saeed.bishara@gmail.com> Tested-by: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-25 23:39:37 +08:00
regs->ARM_sp -= 4;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
usp = (u32 __user *)regs->ARM_sp;
ARM: 5793/1: ARM: Check put_user fail in do_signal when enable OABI_COMPAT Using OABI, the call to put_user in do_signal can fail causing the calling app to hang. The solution is to check if put_user fails and force the app to seg fault in that case. Tested with multiple sleeping apps/threads (using the nanosleep syscall) and suspend/resume. Signed-off-by: janboe <janboe.ye at gmail.com> Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-24 00:03:32 +08:00
if (put_user(regs->ARM_pc, usp) == 0) {
regs->ARM_pc = KERN_RESTART_CODE;
} else {
regs->ARM_sp += 4;
force_sigsegv(0, current);
}
[ARM] 3626/1: ARM EABI: fix syscall restarting Patch from Nicolas Pitre The RESTARTBLOCK case currently store some code on the stack to invoke sys_restart_syscall. However this is ABI dependent and there is a mismatch with the way __NR_restart_syscall gets defined when the kernel is compiled for EABI. There is also a long standing bug in the thumb case since with OABI the __NR_restart_syscall value includes __NR_SYSCALL_BASE which should not be the case for Thumb syscalls. Credits to Yauheni Kaliuta <yauheni.kaliuta@gmail.com> for finding the EABI bug. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-23 05:18:45 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
if (regs->ARM_r0 == -ERESTARTNOHAND ||
regs->ARM_r0 == -ERESTARTSYS ||
regs->ARM_r0 == -ERESTARTNOINTR) {
syscall: Sort out syscall_restart name clash. Stephen Rothwell <sfr@canb.auug.org.au> writes: > Today's linux-next build of at least some av32 and arm configs failed like this: > > arch/avr32/kernel/signal.c:216: error: conflicting types for 'restart_syscall' > include/linux/sched.h:2184: error: previous definition of 'restart_syscall' was here > > Caused by commit 690cc3ffe33ac4a2857583c22d4c6244ae11684d ("syscall: > Implement a convinience function restart_syscall") from the net tree. Grrr. Some days it feels like all of the good names are already taken. Let's just rename the two static users in arm and avr32 to get this sorted out. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 06:52:40 +08:00
setup_syscall_restart(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
/* If there's no signal to deliver, we just put the saved sigmask
* back.
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[ARM] ptrace: clean up single stepping support Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-04 17:50:28 +08:00
single_step_set(current);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
asmlinkage void
do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
{
if (thread_flags & _TIF_SIGPENDING)
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
do_signal(regs, syscall);
KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6] Implement TIF_NOTIFY_RESUME for most of those architectures in which isn't yet available, and, whilst we're at it, have it call the appropriate tracehook. After this patch, blackfin, m68k* and xtensa still lack support and need alteration of assembly code to make it work. Resume notification can then be used (by a later patch) to install a new session keyring on the parent of a process. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> cc: linux-arch@vger.kernel.org Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 16:14:16 +08:00
if (thread_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 16:14:21 +08:00
if (current->replacement_session_keyring)
key_replace_session_keyring();
KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6] Implement TIF_NOTIFY_RESUME for most of those architectures in which isn't yet available, and, whilst we're at it, have it call the appropriate tracehook. After this patch, blackfin, m68k* and xtensa still lack support and need alteration of assembly code to make it work. Resume notification can then be used (by a later patch) to install a new session keyring on the parent of a process. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> cc: linux-arch@vger.kernel.org Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 16:14:16 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}