linux_old1/include/linux/memcontrol.h

293 lines
7.7 KiB
C
Raw Normal View History

/* memcontrol.h - Memory Controller
*
* Copyright IBM Corporation, 2007
* Author Balbir Singh <balbir@linux.vnet.ibm.com>
*
* Copyright 2007 OpenVZ SWsoft Inc
* Author: Pavel Emelianov <xemul@openvz.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _LINUX_MEMCONTROL_H
#define _LINUX_MEMCONTROL_H
#include <linux/cgroup.h>
struct mem_cgroup;
struct page_cgroup;
struct page;
struct mm_struct;
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
/*
* All "charge" functions with gfp_mask should use GFP_KERNEL or
* (gfp_mask & GFP_RECLAIM_MASK). In current implementatin, memcg doesn't
* alloc memory but reclaims memory from all available zones. So, "where I want
* memory from" bits of gfp_mask has no meaning. So any bits of that field is
* available but adding a rule is better. charge functions' gfp_mask should
* be set to GFP_KERNEL or gfp_mask & GFP_RECLAIM_MASK for avoiding ambiguous
* codes.
* (Of course, if memcg does memory allocation in future, GFP_KERNEL is sane.)
*/
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:07:48 +08:00
extern int mem_cgroup_newpage_charge(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask);
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:07:48 +08:00
/* for swap handling */
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:08:00 +08:00
extern int mem_cgroup_try_charge_swapin(struct mm_struct *mm,
struct page *page, gfp_t mask, struct mem_cgroup **ptr);
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:07:48 +08:00
extern void mem_cgroup_commit_charge_swapin(struct page *page,
struct mem_cgroup *ptr);
extern void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *ptr);
extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask);
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:08:01 +08:00
extern void mem_cgroup_add_lru_list(struct page *page, enum lru_list lru);
extern void mem_cgroup_del_lru_list(struct page *page, enum lru_list lru);
extern void mem_cgroup_rotate_lru_list(struct page *page, enum lru_list lru);
extern void mem_cgroup_del_lru(struct page *page);
extern void mem_cgroup_move_lists(struct page *page,
enum lru_list from, enum lru_list to);
extern void mem_cgroup_uncharge_page(struct page *page);
memcg: remove refcnt from page_cgroup memcg: performance improvements Patch Description 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed) 2/5 ... swapcache handling patch 3/5 ... add helper function for shmem's memory reclaim patch 4/5 ... optimize by likely/unlikely ppatch 5/5 ... remove redundunt check patch (shmem handling is fixed.) Unix bench result. == 2.6.26-rc2-mm1 + memory resource controller Execl Throughput 2915.4 lps (29.6 secs, 3 samples) C Compiler Throughput 1019.3 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5796.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1097.7 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 565.3 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1022128.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 544057.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 346481.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 319325.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 148788.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 99051.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2058917.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1606109.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 854789.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 126145.2 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 2915.4 678.0 File Copy 1024 bufsize 2000 maxblocks 3960.0 346481.0 875.0 File Copy 256 bufsize 500 maxblocks 1655.0 99051.0 598.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 854789.0 1473.8 Shell Scripts (8 concurrent) 6.0 1097.7 1829.5 ========= FINAL SCORE 991.3 == 2.6.26-rc2-mm1 + this set == Execl Throughput 3012.9 lps (29.9 secs, 3 samples) C Compiler Throughput 981.0 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5872.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1120.3 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 578.0 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1003993.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 550452.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 347159.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 314644.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 151852.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 101000.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2033256.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1611814.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 847979.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 128148.7 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 3012.9 700.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 347159.0 876.7 File Copy 256 bufsize 500 maxblocks 1655.0 101000.0 610.3 File Copy 4096 bufsize 8000 maxblocks 5800.0 847979.0 1462.0 Shell Scripts (8 concurrent) 6.0 1120.3 1867.2 ========= FINAL SCORE 1004.6 This patch: Remove refcnt from page_cgroup(). After this, * A page is charged only when !page_mapped() && no page_cgroup is assigned. * Anon page is newly mapped. * File page is added to mapping->tree. * A page is uncharged only when * Anon page is fully unmapped. * File page is removed from LRU. There is no change in behavior from user's view. This patch also removes unnecessary calls in rmap.c which was used only for refcnt mangement. [akpm@linux-foundation.org: fix warning] [hugh@veritas.com: fix shmem_unuse_inode charging] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:47:14 +08:00
extern void mem_cgroup_uncharge_cache_page(struct page *page);
extern int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask);
extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
struct list_head *dst,
unsigned long *scanned, int order,
int mode, struct zone *z,
struct mem_cgroup *mem_cont,
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 11:26:32 +08:00
int active, int file);
extern void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask);
int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem);
cgroups: add an owner to the mm_struct Remove the mem_cgroup member from mm_struct and instead adds an owner. This approach was suggested by Paul Menage. The advantage of this approach is that, once the mm->owner is known, using the subsystem id, the cgroup can be determined. It also allows several control groups that are virtually grouped by mm_struct, to exist independent of the memory controller i.e., without adding mem_cgroup's for each controller, to mm_struct. A new config option CONFIG_MM_OWNER is added and the memory resource controller selects this config option. This patch also adds cgroup callbacks to notify subsystems when mm->owner changes. The mm_cgroup_changed callback is called with the task_lock() of the new task held and is called just prior to changing the mm->owner. I am indebted to Paul Menage for the several reviews of this patchset and helping me make it lighter and simpler. This patch was tested on a powerpc box, it was compiled with both the MM_OWNER config turned on and off. After the thread group leader exits, it's moved to init_css_state by cgroup_exit(), thus all future charges from runnings threads would be redirected to the init_css_set's subsystem. Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: Sudhir Kumar <skumar@linux.vnet.ibm.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Hirokazu Takahashi <taka@valinux.co.jp> Cc: David Rientjes <rientjes@google.com>, Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Reviewed-by: Paul Menage <menage@google.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 16:00:16 +08:00
extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
static inline
int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup)
{
struct mem_cgroup *mem;
rcu_read_lock();
mem = mem_cgroup_from_task(rcu_dereference((mm)->owner));
rcu_read_unlock();
return cgroup == mem;
}
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 16:13:53 +08:00
extern int
mem_cgroup_prepare_migration(struct page *page, struct mem_cgroup **ptr);
extern void mem_cgroup_end_migration(struct mem_cgroup *mem,
struct page *oldpage, struct page *newpage);
bugfix for memory cgroup controller: migration under memory controller fix While using memory control cgroup, page-migration under it works as following. == 1. uncharge all refs at try to unmap. 2. charge regs again remove_migration_ptes() == This is simple but has following problems. == The page is uncharged and charged back again if *mapped*. - This means that cgroup before migration can be different from one after migration - If page is not mapped but charged as page cache, charge is just ignored (because not mapped, it will not be uncharged before migration) This is memory leak. == This patch tries to keep memory cgroup at page migration by increasing one refcnt during it. 3 functions are added. mem_cgroup_prepare_migration() --- increase refcnt of page->page_cgroup mem_cgroup_end_migration() --- decrease refcnt of page->page_cgroup mem_cgroup_page_migration() --- copy page->page_cgroup from old page to new page. During migration - old page is under PG_locked. - new page is under PG_locked, too. - both old page and new page is not on LRU. These 3 facts guarantee that page_cgroup() migration has no race. Tested and worked well in x86_64/fake-NUMA box. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 16:14:10 +08:00
/*
* For memory reclaim.
*/
extern int mem_cgroup_get_reclaim_priority(struct mem_cgroup *mem);
extern void mem_cgroup_note_reclaim_priority(struct mem_cgroup *mem,
int priority);
extern void mem_cgroup_record_reclaim_priority(struct mem_cgroup *mem,
int priority);
int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg);
int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg);
unsigned long mem_cgroup_zone_nr_pages(struct mem_cgroup *memcg,
struct zone *zone,
enum lru_list lru);
struct zone_reclaim_stat *mem_cgroup_get_reclaim_stat(struct mem_cgroup *memcg,
struct zone *zone);
struct zone_reclaim_stat*
mem_cgroup_get_reclaim_stat_from_page(struct page *page);
extern void mem_cgroup_print_oom_info(struct mem_cgroup *memcg,
struct task_struct *p);
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
extern int do_swap_account;
#endif
static inline bool mem_cgroup_disabled(void)
{
if (mem_cgroup_subsys.disabled)
return true;
return false;
}
extern bool mem_cgroup_oom_called(struct task_struct *task);
void mem_cgroup_update_mapped_file_stat(struct page *page, int val);
2009-09-24 06:56:39 +08:00
unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
gfp_t gfp_mask, int nid,
int zid);
#else /* CONFIG_CGROUP_MEM_RES_CTLR */
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:07:48 +08:00
struct mem_cgroup;
static inline int mem_cgroup_newpage_charge(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask)
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 16:13:53 +08:00
{
return 0;
}
static inline int mem_cgroup_cache_charge(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask)
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 16:13:53 +08:00
{
return 0;
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 16:13:53 +08:00
}
memcg: mem+swap controller core This patch implements per cgroup limit for usage of memory+swap. However there are SwapCache, double counting of swap-cache and swap-entry is avoided. Mem+Swap controller works as following. - memory usage is limited by memory.limit_in_bytes. - memory + swap usage is limited by memory.memsw_limit_in_bytes. This has following benefits. - A user can limit total resource usage of mem+swap. Without this, because memory resource controller doesn't take care of usage of swap, a process can exhaust all the swap (by memory leak.) We can avoid this case. And Swap is shared resource but it cannot be reclaimed (goes back to memory) until it's used. This characteristic can be trouble when the memory is divided into some parts by cpuset or memcg. Assume group A and group B. After some application executes, the system can be.. Group A -- very large free memory space but occupy 99% of swap. Group B -- under memory shortage but cannot use swap...it's nearly full. Ability to set appropriate swap limit for each group is required. Maybe someone wonder "why not swap but mem+swap ?" - The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of mem+swap. In other words, when we want to limit the usage of swap without affecting global LRU, mem+swap limit is better than just limiting swap. Accounting target information is stored in swap_cgroup which is per swap entry record. Charge is done as following. map - charge page and memsw. unmap - uncharge page/memsw if not SwapCache. swap-out (__delete_from_swap_cache) - uncharge page - record mem_cgroup information to swap_cgroup. swap-in (do_swap_page) - charged as page and memsw. record in swap_cgroup is cleared. memsw accounting is decremented. swap-free (swap_free()) - if swap entry is freed, memsw is uncharged by PAGE_SIZE. There are people work under never-swap environments and consider swap as something bad. For such people, this mem+swap controller extension is just an overhead. This overhead is avoided by config or boot option. (see Kconfig. detail is not in this patch.) TODO: - maybe more optimization can be don in swap-in path. (but not very safe.) But we just do simple accounting at this stage. [nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex] [hugh@veritas.com: memswap controller core swapcache fixes] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:08:00 +08:00
static inline int mem_cgroup_try_charge_swapin(struct mm_struct *mm,
struct page *page, gfp_t gfp_mask, struct mem_cgroup **ptr)
memcg: introduce charge-commit-cancel style of functions There is a small race in do_swap_page(). When the page swapped-in is charged, the mapcount can be greater than 0. But, at the same time some process (shares it ) call unmap and make mapcount 1->0 and the page is uncharged. CPUA CPUB mapcount == 1. (1) charge if mapcount==0 zap_pte_range() (2) mapcount 1 => 0. (3) uncharge(). (success) (4) set page's rmap() mapcount 0=>1 Then, this swap page's account is leaked. For fixing this, I added a new interface. - charge account to res_counter by PAGE_SIZE and try to free pages if necessary. - commit register page_cgroup and add to LRU if necessary. - cancel uncharge PAGE_SIZE because of do_swap_page failure. CPUA (1) charge (always) (2) set page's rmap (mapcount > 0) (3) commit charge was necessary or not after set_pte(). This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting. Usual mem_cgroup_charge_common() does charge -> commit at a time. And this patch also adds following function to clarify all charges. - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge() called against newly allocated anon pages. - mem_cgroup_charge_migrate_fixup() called only from remove_migration_ptes(). we'll have to rewrite this later.(this patch just keeps old behavior) This function will be removed by additional patch to make migration clearer. Good for clarifying "what we do" Then, we have 4 following charge points. - newpage - swap-in - add-to-cache. - migration. [akpm@linux-foundation.org: add missing inline directives to stubs] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:07:48 +08:00
{
return 0;
}
static inline void mem_cgroup_commit_charge_swapin(struct page *page,
struct mem_cgroup *ptr)
{
}
static inline void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *ptr)
{
}
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 16:13:53 +08:00
static inline void mem_cgroup_uncharge_page(struct page *page)
{
}
memcg: remove refcnt from page_cgroup memcg: performance improvements Patch Description 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed) 2/5 ... swapcache handling patch 3/5 ... add helper function for shmem's memory reclaim patch 4/5 ... optimize by likely/unlikely ppatch 5/5 ... remove redundunt check patch (shmem handling is fixed.) Unix bench result. == 2.6.26-rc2-mm1 + memory resource controller Execl Throughput 2915.4 lps (29.6 secs, 3 samples) C Compiler Throughput 1019.3 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5796.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1097.7 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 565.3 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1022128.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 544057.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 346481.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 319325.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 148788.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 99051.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2058917.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1606109.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 854789.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 126145.2 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 2915.4 678.0 File Copy 1024 bufsize 2000 maxblocks 3960.0 346481.0 875.0 File Copy 256 bufsize 500 maxblocks 1655.0 99051.0 598.5 File Copy 4096 bufsize 8000 maxblocks 5800.0 854789.0 1473.8 Shell Scripts (8 concurrent) 6.0 1097.7 1829.5 ========= FINAL SCORE 991.3 == 2.6.26-rc2-mm1 + this set == Execl Throughput 3012.9 lps (29.9 secs, 3 samples) C Compiler Throughput 981.0 lpm (60.0 secs, 3 samples) Shell Scripts (1 concurrent) 5872.0 lpm (60.0 secs, 3 samples) Shell Scripts (8 concurrent) 1120.3 lpm (60.0 secs, 3 samples) Shell Scripts (16 concurrent) 578.0 lpm (60.0 secs, 3 samples) File Read 1024 bufsize 2000 maxblocks 1003993.0 KBps (30.0 secs, 3 samples) File Write 1024 bufsize 2000 maxblocks 550452.0 KBps (30.0 secs, 3 samples) File Copy 1024 bufsize 2000 maxblocks 347159.0 KBps (30.0 secs, 3 samples) File Read 256 bufsize 500 maxblocks 314644.0 KBps (30.0 secs, 3 samples) File Write 256 bufsize 500 maxblocks 151852.0 KBps (30.0 secs, 3 samples) File Copy 256 bufsize 500 maxblocks 101000.0 KBps (30.0 secs, 3 samples) File Read 4096 bufsize 8000 maxblocks 2033256.0 KBps (30.0 secs, 3 samples) File Write 4096 bufsize 8000 maxblocks 1611814.0 KBps (30.0 secs, 3 samples) File Copy 4096 bufsize 8000 maxblocks 847979.0 KBps (30.0 secs, 3 samples) Dc: sqrt(2) to 99 decimal places 128148.7 lpm (30.0 secs, 3 samples) INDEX VALUES TEST BASELINE RESULT INDEX Execl Throughput 43.0 3012.9 700.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 347159.0 876.7 File Copy 256 bufsize 500 maxblocks 1655.0 101000.0 610.3 File Copy 4096 bufsize 8000 maxblocks 5800.0 847979.0 1462.0 Shell Scripts (8 concurrent) 6.0 1120.3 1867.2 ========= FINAL SCORE 1004.6 This patch: Remove refcnt from page_cgroup(). After this, * A page is charged only when !page_mapped() && no page_cgroup is assigned. * Anon page is newly mapped. * File page is added to mapping->tree. * A page is uncharged only when * Anon page is fully unmapped. * File page is removed from LRU. There is no change in behavior from user's view. This patch also removes unnecessary calls in rmap.c which was used only for refcnt mangement. [akpm@linux-foundation.org: fix warning] [hugh@veritas.com: fix shmem_unuse_inode charging] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: Paul Menage <menage@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:47:14 +08:00
static inline void mem_cgroup_uncharge_cache_page(struct page *page)
{
}
static inline int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask)
{
return 0;
}
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 10:08:01 +08:00
static inline void mem_cgroup_add_lru_list(struct page *page, int lru)
{
}
static inline void mem_cgroup_del_lru_list(struct page *page, int lru)
{
return ;
}
static inline void mem_cgroup_rotate_lru_list(struct page *page, int lru)
{
return ;
}
static inline void mem_cgroup_del_lru(struct page *page)
{
return ;
}
static inline void
mem_cgroup_move_lists(struct page *page, enum lru_list from, enum lru_list to)
{
}
static inline int mm_match_cgroup(struct mm_struct *mm, struct mem_cgroup *mem)
{
return 1;
}
static inline int task_in_mem_cgroup(struct task_struct *task,
const struct mem_cgroup *mem)
{
return 1;
}
static inline int
mem_cgroup_prepare_migration(struct page *page, struct mem_cgroup **ptr)
bugfix for memory cgroup controller: migration under memory controller fix While using memory control cgroup, page-migration under it works as following. == 1. uncharge all refs at try to unmap. 2. charge regs again remove_migration_ptes() == This is simple but has following problems. == The page is uncharged and charged back again if *mapped*. - This means that cgroup before migration can be different from one after migration - If page is not mapped but charged as page cache, charge is just ignored (because not mapped, it will not be uncharged before migration) This is memory leak. == This patch tries to keep memory cgroup at page migration by increasing one refcnt during it. 3 functions are added. mem_cgroup_prepare_migration() --- increase refcnt of page->page_cgroup mem_cgroup_end_migration() --- decrease refcnt of page->page_cgroup mem_cgroup_page_migration() --- copy page->page_cgroup from old page to new page. During migration - old page is under PG_locked. - new page is under PG_locked, too. - both old page and new page is not on LRU. These 3 facts guarantee that page_cgroup() migration has no race. Tested and worked well in x86_64/fake-NUMA box. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 16:14:10 +08:00
{
return 0;
}
static inline void mem_cgroup_end_migration(struct mem_cgroup *mem,
struct page *oldpage,
struct page *newpage)
bugfix for memory cgroup controller: migration under memory controller fix While using memory control cgroup, page-migration under it works as following. == 1. uncharge all refs at try to unmap. 2. charge regs again remove_migration_ptes() == This is simple but has following problems. == The page is uncharged and charged back again if *mapped*. - This means that cgroup before migration can be different from one after migration - If page is not mapped but charged as page cache, charge is just ignored (because not mapped, it will not be uncharged before migration) This is memory leak. == This patch tries to keep memory cgroup at page migration by increasing one refcnt during it. 3 functions are added. mem_cgroup_prepare_migration() --- increase refcnt of page->page_cgroup mem_cgroup_end_migration() --- decrease refcnt of page->page_cgroup mem_cgroup_page_migration() --- copy page->page_cgroup from old page to new page. During migration - old page is under PG_locked. - new page is under PG_locked, too. - both old page and new page is not on LRU. These 3 facts guarantee that page_cgroup() migration has no race. Tested and worked well in x86_64/fake-NUMA box. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 16:14:10 +08:00
{
}
static inline int mem_cgroup_get_reclaim_priority(struct mem_cgroup *mem)
{
return 0;
}
static inline void mem_cgroup_note_reclaim_priority(struct mem_cgroup *mem,
int priority)
{
}
static inline void mem_cgroup_record_reclaim_priority(struct mem_cgroup *mem,
int priority)
{
}
static inline bool mem_cgroup_disabled(void)
{
return true;
}
static inline bool mem_cgroup_oom_called(struct task_struct *task)
{
return false;
}
static inline int
mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg)
{
return 1;
}
static inline int
mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg)
{
return 1;
}
static inline unsigned long
mem_cgroup_zone_nr_pages(struct mem_cgroup *memcg, struct zone *zone,
enum lru_list lru)
{
return 0;
}
static inline struct zone_reclaim_stat*
mem_cgroup_get_reclaim_stat(struct mem_cgroup *memcg, struct zone *zone)
{
return NULL;
}
static inline struct zone_reclaim_stat*
mem_cgroup_get_reclaim_stat_from_page(struct page *page)
{
return NULL;
}
static inline void
mem_cgroup_print_oom_info(struct mem_cgroup *memcg, struct task_struct *p)
{
}
static inline void mem_cgroup_update_mapped_file_stat(struct page *page,
int val)
{
}
2009-09-24 06:56:39 +08:00
static inline
unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
gfp_t gfp_mask, int nid, int zid)
{
return 0;
}
#endif /* CONFIG_CGROUP_MEM_CONT */
#endif /* _LINUX_MEMCONTROL_H */