linux_old1/drivers/input/touchscreen/egalax_ts_serial.c

/*
 * EETI Egalax serial touchscreen driver
 *
 * Copyright (c) 2015 Zoltán Böszörményi <zboszor@pr.hu>
 *
 * based on the
 *
 * Hampshire serial touchscreen driver (Copyright (c) 2010 Adam Bennett)
 */

/*
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published by
 * the Free Software Foundation.
 */

#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>

#define DRIVER_DESC	"EETI Egalax serial touchscreen driver"

/*
 * Definitions & global arrays.
 */

#define EGALAX_FORMAT_MAX_LENGTH	6
#define EGALAX_FORMAT_START_BIT		BIT(7)
#define EGALAX_FORMAT_PRESSURE_BIT	BIT(6)
#define EGALAX_FORMAT_TOUCH_BIT		BIT(0)
#define EGALAX_FORMAT_RESOLUTION_MASK	0x06

#define EGALAX_MIN_XC			0
#define EGALAX_MAX_XC			0x4000
#define EGALAX_MIN_YC			0
#define EGALAX_MAX_YC			0x4000

/*
 * Per-touchscreen data.
 */
struct egalax {
	struct input_dev *input;
	struct serio *serio;
	int idx;
	u8 data[EGALAX_FORMAT_MAX_LENGTH];
	char phys[32];
};

static void egalax_process_data(struct egalax *egalax)
{
	struct input_dev *dev = egalax->input;
	u8 *data = egalax->data;
	u16 x, y;
	u8 shift;
	u8 mask;

	shift = 3 - ((data[0] & EGALAX_FORMAT_RESOLUTION_MASK) >> 1);
	mask = 0xff >> (shift + 1);

	x = (((u16)(data[1] & mask) << 7) | (data[2] & 0x7f)) << shift;
	y = (((u16)(data[3] & mask) << 7) | (data[4] & 0x7f)) << shift;

	input_report_key(dev, BTN_TOUCH, data[0] & EGALAX_FORMAT_TOUCH_BIT);
	input_report_abs(dev, ABS_X, x);
	input_report_abs(dev, ABS_Y, y);
	input_sync(dev);
}

static irqreturn_t egalax_interrupt(struct serio *serio,
				    unsigned char data, unsigned int flags)
{
	struct egalax *egalax = serio_get_drvdata(serio);
	int pkt_len;

	egalax->data[egalax->idx++] = data;

	if (likely(egalax->data[0] & EGALAX_FORMAT_START_BIT)) {
		pkt_len = egalax->data[0] & EGALAX_FORMAT_PRESSURE_BIT ? 6 : 5;
		if (pkt_len == egalax->idx) {
			egalax_process_data(egalax);
			egalax->idx = 0;
		}
	} else {
		dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
			egalax->data[0]);
		egalax->idx = 0;
	}

	return IRQ_HANDLED;
}

/*
 * egalax_connect() is the routine that is called when someone adds a
 * new serio device that supports egalax protocol and registers it as
 * an input device. This is usually accomplished using inputattach.
 */
static int egalax_connect(struct serio *serio, struct serio_driver *drv)
{
	struct egalax *egalax;
	struct input_dev *input_dev;
	int error;

	egalax = kzalloc(sizeof(struct egalax), GFP_KERNEL);
	input_dev = input_allocate_device();
	if (!egalax || !input_dev) {
		error = -ENOMEM;
		goto err_free_mem;
	}

	egalax->serio = serio;
	egalax->input = input_dev;
	snprintf(egalax->phys, sizeof(egalax->phys),
		 "%s/input0", serio->phys);

	input_dev->name = "EETI eGalaxTouch Serial TouchScreen";
	input_dev->phys = egalax->phys;
	input_dev->id.bustype = BUS_RS232;
	input_dev->id.vendor = SERIO_EGALAX;
	input_dev->id.product = 0;
	input_dev->id.version = 0x0001;
	input_dev->dev.parent = &serio->dev;

	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
	input_set_abs_params(input_dev, ABS_X,
			     EGALAX_MIN_XC, EGALAX_MAX_XC, 0, 0);
	input_set_abs_params(input_dev, ABS_Y,
			     EGALAX_MIN_YC, EGALAX_MAX_YC, 0, 0);

	serio_set_drvdata(serio, egalax);

	error = serio_open(serio, drv);
	if (error)
		goto err_reset_drvdata;

	error = input_register_device(input_dev);
	if (error)
		goto err_close_serio;

	return 0;

err_close_serio:
	serio_close(serio);
err_reset_drvdata:
	serio_set_drvdata(serio, NULL);
err_free_mem:
	input_free_device(input_dev);
	kfree(egalax);
	return error;
}

static void egalax_disconnect(struct serio *serio)
{
	struct egalax *egalax = serio_get_drvdata(serio);

	serio_close(serio);
	serio_set_drvdata(serio, NULL);
	input_unregister_device(egalax->input);
	kfree(egalax);
}

/*
 * The serio driver structure.
 */

static const struct serio_device_id egalax_serio_ids[] = {
	{
		.type	= SERIO_RS232,
		.proto	= SERIO_EGALAX,
		.id	= SERIO_ANY,
		.extra	= SERIO_ANY,
	},
	{ 0 }
};

MODULE_DEVICE_TABLE(serio, egalax_serio_ids);

static struct serio_driver egalax_drv = {
	.driver		= {
		.name	= "egalax",
	},
	.description	= DRIVER_DESC,
	.id_table	= egalax_serio_ids,
	.interrupt	= egalax_interrupt,
	.connect	= egalax_connect,
	.disconnect	= egalax_disconnect,
};
module_serio_driver(egalax_drv);

MODULE_AUTHOR("Zoltán Böszörményi <zboszor@pr.hu>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL v2");