linux_old1/fs/xfs/libxfs/xfs_inode_buf.c

580 lines
17 KiB
C
Raw Normal View History

/*
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_defer.h"
#include "xfs_inode.h"
#include "xfs_error.h"
#include "xfs_cksum.h"
#include "xfs_icache.h"
#include "xfs_trans.h"
#include "xfs_ialloc.h"
#include "xfs_dir2.h"
/*
* Check that none of the inode's in the buffer have a next
* unlinked field of 0.
*/
#if defined(DEBUG)
void
xfs_inobp_check(
xfs_mount_t *mp,
xfs_buf_t *bp)
{
int i;
int j;
xfs_dinode_t *dip;
j = mp->m_inode_cluster_size >> mp->m_sb.sb_inodelog;
for (i = 0; i < j; i++) {
dip = xfs_buf_offset(bp, i * mp->m_sb.sb_inodesize);
if (!dip->di_next_unlinked) {
xfs_alert(mp,
"Detected bogus zero next_unlinked field in inode %d buffer 0x%llx.",
i, (long long)bp->b_bn);
}
}
}
#endif
bool
xfs_dinode_good_version(
struct xfs_mount *mp,
__u8 version)
{
if (xfs_sb_version_hascrc(&mp->m_sb))
return version == 3;
return version == 1 || version == 2;
}
/*
* If we are doing readahead on an inode buffer, we might be in log recovery
* reading an inode allocation buffer that hasn't yet been replayed, and hence
* has not had the inode cores stamped into it. Hence for readahead, the buffer
* may be potentially invalid.
*
xfs: inode recovery readahead can race with inode buffer creation When we do inode readahead in log recovery, we do can do the readahead before we've replayed the icreate transaction that stamps the buffer with inode cores. The inode readahead verifier catches this and marks the buffer as !done to indicate that it doesn't yet contain valid inodes. In adding buffer error notification (i.e. setting b_error = -EIO at the same time as as we clear the done flag) to such a readahead verifier failure, we can then get subsequent inode recovery failing with this error: XFS (dm-0): metadata I/O error: block 0xa00060 ("xlog_recover_do..(read#2)") error 5 numblks 32 This occurs when readahead completion races with icreate item replay such as: inode readahead find buffer lock buffer submit RA io .... icreate recovery xfs_trans_get_buffer find buffer lock buffer <blocks on RA completion> ..... <ra completion> fails verifier clear XBF_DONE set bp->b_error = -EIO release and unlock buffer <icreate gains lock> icreate initialises buffer marks buffer as done adds buffer to delayed write queue releases buffer At this point, we have an initialised inode buffer that is up to date but has an -EIO state registered against it. When we finally get to recovering an inode in that buffer: inode item recovery xfs_trans_read_buffer find buffer lock buffer sees XBF_DONE is set, returns buffer sees bp->b_error is set fail log recovery! Essentially, we need xfs_trans_get_buf_map() to clear the error status of the buffer when doing a lookup. This function returns uninitialised buffers, so the buffer returned can not be in an error state and none of the code that uses this function expects b_error to be set on return. Indeed, there is an ASSERT(!bp->b_error); in the transaction case in xfs_trans_get_buf_map() that would have caught this if log recovery used transactions.... This patch firstly changes the inode readahead failure to set -EIO on the buffer, and secondly changes xfs_buf_get_map() to never return a buffer with an error state set so this first change doesn't cause unexpected log recovery failures. cc: <stable@vger.kernel.org> # 3.12 - current Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-01-12 04:03:44 +08:00
* If the readahead buffer is invalid, we need to mark it with an error and
* clear the DONE status of the buffer so that a followup read will re-read it
* from disk. We don't report the error otherwise to avoid warnings during log
* recovery and we don't get unnecssary panics on debug kernels. We use EIO here
* because all we want to do is say readahead failed; there is no-one to report
* the error to, so this will distinguish it from a non-ra verifier failure.
xfs: handle dquot buffer readahead in log recovery correctly When we do dquot readahead in log recovery, we do not use a verifier as the underlying buffer may not have dquots in it. e.g. the allocation operation hasn't yet been replayed. Hence we do not want to fail recovery because we detect an operation to be replayed has not been run yet. This problem was addressed for inodes in commit d891400 ("xfs: inode buffers may not be valid during recovery readahead") but the problem was not recognised to exist for dquots and their buffers as the dquot readahead did not have a verifier. The result of not using a verifier is that when the buffer is then next read to replay a dquot modification, the dquot buffer verifier will only be attached to the buffer if *readahead is not complete*. Hence we can read the buffer, replay the dquot changes and then add it to the delwri submission list without it having a verifier attached to it. This then generates warnings in xfs_buf_ioapply(), which catches and warns about this case. Fix this and make it handle the same readahead verifier error cases as for inode buffers by adding a new readahead verifier that has a write operation as well as a read operation that marks the buffer as not done if any corruption is detected. Also make sure we don't run readahead if the dquot buffer has been marked as cancelled by recovery. This will result in readahead either succeeding and the buffer having a valid write verifier, or readahead failing and the buffer state requiring the subsequent read to resubmit the IO with the new verifier. In either case, this will result in the buffer always ending up with a valid write verifier on it. Note: we also need to fix the inode buffer readahead error handling to mark the buffer with EIO. Brian noticed the code I copied from there wrong during review, so fix it at the same time. Add comments linking the two functions that handle readahead verifier errors together so we don't forget this behavioural link in future. cc: <stable@vger.kernel.org> # 3.12 - current Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-01-12 04:04:01 +08:00
* Changes to this readahead error behavour also need to be reflected in
* xfs_dquot_buf_readahead_verify().
*/
static void
xfs_inode_buf_verify(
struct xfs_buf *bp,
bool readahead)
{
struct xfs_mount *mp = bp->b_target->bt_mount;
int i;
int ni;
/*
* Validate the magic number and version of every inode in the buffer
*/
ni = XFS_BB_TO_FSB(mp, bp->b_length) * mp->m_sb.sb_inopblock;
for (i = 0; i < ni; i++) {
int di_ok;
xfs_dinode_t *dip;
dip = xfs_buf_offset(bp, (i << mp->m_sb.sb_inodelog));
di_ok = dip->di_magic == cpu_to_be16(XFS_DINODE_MAGIC) &&
xfs_dinode_good_version(mp, dip->di_version);
if (unlikely(XFS_TEST_ERROR(!di_ok, mp,
XFS_ERRTAG_ITOBP_INOTOBP))) {
if (readahead) {
bp->b_flags &= ~XBF_DONE;
xfs: inode recovery readahead can race with inode buffer creation When we do inode readahead in log recovery, we do can do the readahead before we've replayed the icreate transaction that stamps the buffer with inode cores. The inode readahead verifier catches this and marks the buffer as !done to indicate that it doesn't yet contain valid inodes. In adding buffer error notification (i.e. setting b_error = -EIO at the same time as as we clear the done flag) to such a readahead verifier failure, we can then get subsequent inode recovery failing with this error: XFS (dm-0): metadata I/O error: block 0xa00060 ("xlog_recover_do..(read#2)") error 5 numblks 32 This occurs when readahead completion races with icreate item replay such as: inode readahead find buffer lock buffer submit RA io .... icreate recovery xfs_trans_get_buffer find buffer lock buffer <blocks on RA completion> ..... <ra completion> fails verifier clear XBF_DONE set bp->b_error = -EIO release and unlock buffer <icreate gains lock> icreate initialises buffer marks buffer as done adds buffer to delayed write queue releases buffer At this point, we have an initialised inode buffer that is up to date but has an -EIO state registered against it. When we finally get to recovering an inode in that buffer: inode item recovery xfs_trans_read_buffer find buffer lock buffer sees XBF_DONE is set, returns buffer sees bp->b_error is set fail log recovery! Essentially, we need xfs_trans_get_buf_map() to clear the error status of the buffer when doing a lookup. This function returns uninitialised buffers, so the buffer returned can not be in an error state and none of the code that uses this function expects b_error to be set on return. Indeed, there is an ASSERT(!bp->b_error); in the transaction case in xfs_trans_get_buf_map() that would have caught this if log recovery used transactions.... This patch firstly changes the inode readahead failure to set -EIO on the buffer, and secondly changes xfs_buf_get_map() to never return a buffer with an error state set so this first change doesn't cause unexpected log recovery failures. cc: <stable@vger.kernel.org> # 3.12 - current Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-01-12 04:03:44 +08:00
xfs_buf_ioerror(bp, -EIO);
return;
}
xfs_buf_ioerror(bp, -EFSCORRUPTED);
xfs_verifier_error(bp);
#ifdef DEBUG
xfs_alert(mp,
"bad inode magic/vsn daddr %lld #%d (magic=%x)",
(unsigned long long)bp->b_bn, i,
be16_to_cpu(dip->di_magic));
#endif
}
}
xfs_inobp_check(mp, bp);
}
static void
xfs_inode_buf_read_verify(
struct xfs_buf *bp)
{
xfs_inode_buf_verify(bp, false);
}
static void
xfs_inode_buf_readahead_verify(
struct xfs_buf *bp)
{
xfs_inode_buf_verify(bp, true);
}
static void
xfs_inode_buf_write_verify(
struct xfs_buf *bp)
{
xfs_inode_buf_verify(bp, false);
}
const struct xfs_buf_ops xfs_inode_buf_ops = {
.name = "xfs_inode",
.verify_read = xfs_inode_buf_read_verify,
.verify_write = xfs_inode_buf_write_verify,
};
const struct xfs_buf_ops xfs_inode_buf_ra_ops = {
.name = "xxfs_inode_ra",
.verify_read = xfs_inode_buf_readahead_verify,
.verify_write = xfs_inode_buf_write_verify,
};
/*
* This routine is called to map an inode to the buffer containing the on-disk
* version of the inode. It returns a pointer to the buffer containing the
* on-disk inode in the bpp parameter, and in the dipp parameter it returns a
* pointer to the on-disk inode within that buffer.
*
* If a non-zero error is returned, then the contents of bpp and dipp are
* undefined.
*/
int
xfs_imap_to_bp(
struct xfs_mount *mp,
struct xfs_trans *tp,
struct xfs_imap *imap,
struct xfs_dinode **dipp,
struct xfs_buf **bpp,
uint buf_flags,
uint iget_flags)
{
struct xfs_buf *bp;
int error;
buf_flags |= XBF_UNMAPPED;
error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp, imap->im_blkno,
(int)imap->im_len, buf_flags, &bp,
&xfs_inode_buf_ops);
if (error) {
if (error == -EAGAIN) {
ASSERT(buf_flags & XBF_TRYLOCK);
return error;
}
if (error == -EFSCORRUPTED &&
(iget_flags & XFS_IGET_UNTRUSTED))
return -EINVAL;
xfs_warn(mp, "%s: xfs_trans_read_buf() returned error %d.",
__func__, error);
return error;
}
*bpp = bp;
*dipp = xfs_buf_offset(bp, imap->im_boffset);
return 0;
}
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:45 +08:00
void
xfs_inode_from_disk(
struct xfs_inode *ip,
struct xfs_dinode *from)
{
struct xfs_icdinode *to = &ip->i_d;
struct inode *inode = VFS_I(ip);
/*
* Convert v1 inodes immediately to v2 inode format as this is the
* minimum inode version format we support in the rest of the code.
*/
to->di_version = from->di_version;
if (to->di_version == 1) {
set_nlink(inode, be16_to_cpu(from->di_onlink));
to->di_projid_lo = 0;
to->di_projid_hi = 0;
to->di_version = 2;
} else {
set_nlink(inode, be32_to_cpu(from->di_nlink));
to->di_projid_lo = be16_to_cpu(from->di_projid_lo);
to->di_projid_hi = be16_to_cpu(from->di_projid_hi);
}
to->di_format = from->di_format;
to->di_uid = be32_to_cpu(from->di_uid);
to->di_gid = be32_to_cpu(from->di_gid);
to->di_flushiter = be16_to_cpu(from->di_flushiter);
/*
* Time is signed, so need to convert to signed 32 bit before
* storing in inode timestamp which may be 64 bit. Otherwise
* a time before epoch is converted to a time long after epoch
* on 64 bit systems.
*/
inode->i_atime.tv_sec = (int)be32_to_cpu(from->di_atime.t_sec);
inode->i_atime.tv_nsec = (int)be32_to_cpu(from->di_atime.t_nsec);
inode->i_mtime.tv_sec = (int)be32_to_cpu(from->di_mtime.t_sec);
inode->i_mtime.tv_nsec = (int)be32_to_cpu(from->di_mtime.t_nsec);
inode->i_ctime.tv_sec = (int)be32_to_cpu(from->di_ctime.t_sec);
inode->i_ctime.tv_nsec = (int)be32_to_cpu(from->di_ctime.t_nsec);
inode->i_generation = be32_to_cpu(from->di_gen);
inode->i_mode = be16_to_cpu(from->di_mode);
to->di_size = be64_to_cpu(from->di_size);
to->di_nblocks = be64_to_cpu(from->di_nblocks);
to->di_extsize = be32_to_cpu(from->di_extsize);
to->di_nextents = be32_to_cpu(from->di_nextents);
to->di_anextents = be16_to_cpu(from->di_anextents);
to->di_forkoff = from->di_forkoff;
to->di_aformat = from->di_aformat;
to->di_dmevmask = be32_to_cpu(from->di_dmevmask);
to->di_dmstate = be16_to_cpu(from->di_dmstate);
to->di_flags = be16_to_cpu(from->di_flags);
if (to->di_version == 3) {
inode->i_version = be64_to_cpu(from->di_changecount);
to->di_crtime.t_sec = be32_to_cpu(from->di_crtime.t_sec);
to->di_crtime.t_nsec = be32_to_cpu(from->di_crtime.t_nsec);
to->di_flags2 = be64_to_cpu(from->di_flags2);
to->di_cowextsize = be32_to_cpu(from->di_cowextsize);
}
}
void
xfs_inode_to_disk(
struct xfs_inode *ip,
struct xfs_dinode *to,
xfs_lsn_t lsn)
{
struct xfs_icdinode *from = &ip->i_d;
struct inode *inode = VFS_I(ip);
to->di_magic = cpu_to_be16(XFS_DINODE_MAGIC);
to->di_onlink = 0;
to->di_version = from->di_version;
to->di_format = from->di_format;
to->di_uid = cpu_to_be32(from->di_uid);
to->di_gid = cpu_to_be32(from->di_gid);
to->di_projid_lo = cpu_to_be16(from->di_projid_lo);
to->di_projid_hi = cpu_to_be16(from->di_projid_hi);
memset(to->di_pad, 0, sizeof(to->di_pad));
to->di_atime.t_sec = cpu_to_be32(inode->i_atime.tv_sec);
to->di_atime.t_nsec = cpu_to_be32(inode->i_atime.tv_nsec);
to->di_mtime.t_sec = cpu_to_be32(inode->i_mtime.tv_sec);
to->di_mtime.t_nsec = cpu_to_be32(inode->i_mtime.tv_nsec);
to->di_ctime.t_sec = cpu_to_be32(inode->i_ctime.tv_sec);
to->di_ctime.t_nsec = cpu_to_be32(inode->i_ctime.tv_nsec);
to->di_nlink = cpu_to_be32(inode->i_nlink);
to->di_gen = cpu_to_be32(inode->i_generation);
to->di_mode = cpu_to_be16(inode->i_mode);
to->di_size = cpu_to_be64(from->di_size);
to->di_nblocks = cpu_to_be64(from->di_nblocks);
to->di_extsize = cpu_to_be32(from->di_extsize);
to->di_nextents = cpu_to_be32(from->di_nextents);
to->di_anextents = cpu_to_be16(from->di_anextents);
to->di_forkoff = from->di_forkoff;
to->di_aformat = from->di_aformat;
to->di_dmevmask = cpu_to_be32(from->di_dmevmask);
to->di_dmstate = cpu_to_be16(from->di_dmstate);
to->di_flags = cpu_to_be16(from->di_flags);
if (from->di_version == 3) {
to->di_changecount = cpu_to_be64(inode->i_version);
to->di_crtime.t_sec = cpu_to_be32(from->di_crtime.t_sec);
to->di_crtime.t_nsec = cpu_to_be32(from->di_crtime.t_nsec);
to->di_flags2 = cpu_to_be64(from->di_flags2);
to->di_cowextsize = cpu_to_be32(from->di_cowextsize);
to->di_ino = cpu_to_be64(ip->i_ino);
to->di_lsn = cpu_to_be64(lsn);
memset(to->di_pad2, 0, sizeof(to->di_pad2));
uuid_copy(&to->di_uuid, &ip->i_mount->m_sb.sb_meta_uuid);
to->di_flushiter = 0;
} else {
to->di_flushiter = cpu_to_be16(from->di_flushiter);
}
}
void
xfs_log_dinode_to_disk(
struct xfs_log_dinode *from,
struct xfs_dinode *to)
{
to->di_magic = cpu_to_be16(from->di_magic);
to->di_mode = cpu_to_be16(from->di_mode);
to->di_version = from->di_version;
to->di_format = from->di_format;
to->di_onlink = 0;
to->di_uid = cpu_to_be32(from->di_uid);
to->di_gid = cpu_to_be32(from->di_gid);
to->di_nlink = cpu_to_be32(from->di_nlink);
to->di_projid_lo = cpu_to_be16(from->di_projid_lo);
to->di_projid_hi = cpu_to_be16(from->di_projid_hi);
memcpy(to->di_pad, from->di_pad, sizeof(to->di_pad));
to->di_atime.t_sec = cpu_to_be32(from->di_atime.t_sec);
to->di_atime.t_nsec = cpu_to_be32(from->di_atime.t_nsec);
to->di_mtime.t_sec = cpu_to_be32(from->di_mtime.t_sec);
to->di_mtime.t_nsec = cpu_to_be32(from->di_mtime.t_nsec);
to->di_ctime.t_sec = cpu_to_be32(from->di_ctime.t_sec);
to->di_ctime.t_nsec = cpu_to_be32(from->di_ctime.t_nsec);
to->di_size = cpu_to_be64(from->di_size);
to->di_nblocks = cpu_to_be64(from->di_nblocks);
to->di_extsize = cpu_to_be32(from->di_extsize);
to->di_nextents = cpu_to_be32(from->di_nextents);
to->di_anextents = cpu_to_be16(from->di_anextents);
to->di_forkoff = from->di_forkoff;
to->di_aformat = from->di_aformat;
to->di_dmevmask = cpu_to_be32(from->di_dmevmask);
to->di_dmstate = cpu_to_be16(from->di_dmstate);
to->di_flags = cpu_to_be16(from->di_flags);
to->di_gen = cpu_to_be32(from->di_gen);
if (from->di_version == 3) {
to->di_changecount = cpu_to_be64(from->di_changecount);
to->di_crtime.t_sec = cpu_to_be32(from->di_crtime.t_sec);
to->di_crtime.t_nsec = cpu_to_be32(from->di_crtime.t_nsec);
to->di_flags2 = cpu_to_be64(from->di_flags2);
to->di_cowextsize = cpu_to_be32(from->di_cowextsize);
to->di_ino = cpu_to_be64(from->di_ino);
to->di_lsn = cpu_to_be64(from->di_lsn);
memcpy(to->di_pad2, from->di_pad2, sizeof(to->di_pad2));
uuid_copy(&to->di_uuid, &from->di_uuid);
to->di_flushiter = 0;
} else {
to->di_flushiter = cpu_to_be16(from->di_flushiter);
}
}
bool
xfs_dinode_verify(
struct xfs_mount *mp,
xfs_ino_t ino,
struct xfs_dinode *dip)
{
uint16_t mode;
uint16_t flags;
uint64_t flags2;
if (dip->di_magic != cpu_to_be16(XFS_DINODE_MAGIC))
return false;
/* don't allow invalid i_size */
if (be64_to_cpu(dip->di_size) & (1ULL << 63))
return false;
mode = be16_to_cpu(dip->di_mode);
if (mode && xfs_mode_to_ftype(mode) == XFS_DIR3_FT_UNKNOWN)
return false;
/* No zero-length symlinks/dirs. */
if ((S_ISLNK(mode) || S_ISDIR(mode)) && dip->di_size == 0)
return false;
/* only version 3 or greater inodes are extensively verified here */
if (dip->di_version < 3)
return true;
if (!xfs_sb_version_hascrc(&mp->m_sb))
return false;
if (!xfs_verify_cksum((char *)dip, mp->m_sb.sb_inodesize,
XFS_DINODE_CRC_OFF))
return false;
if (be64_to_cpu(dip->di_ino) != ino)
return false;
if (!uuid_equal(&dip->di_uuid, &mp->m_sb.sb_meta_uuid))
return false;
flags = be16_to_cpu(dip->di_flags);
flags2 = be64_to_cpu(dip->di_flags2);
/* don't allow reflink/cowextsize if we don't have reflink */
if ((flags2 & (XFS_DIFLAG2_REFLINK | XFS_DIFLAG2_COWEXTSIZE)) &&
!xfs_sb_version_hasreflink(&mp->m_sb))
return false;
/* don't let reflink and realtime mix */
if ((flags2 & XFS_DIFLAG2_REFLINK) && (flags & XFS_DIFLAG_REALTIME))
return false;
/* don't let reflink and dax mix */
if ((flags2 & XFS_DIFLAG2_REFLINK) && (flags2 & XFS_DIFLAG2_DAX))
return false;
return true;
}
void
xfs_dinode_calc_crc(
struct xfs_mount *mp,
struct xfs_dinode *dip)
{
uint32_t crc;
if (dip->di_version < 3)
return;
ASSERT(xfs_sb_version_hascrc(&mp->m_sb));
crc = xfs_start_cksum_update((char *)dip, mp->m_sb.sb_inodesize,
XFS_DINODE_CRC_OFF);
dip->di_crc = xfs_end_cksum(crc);
}
/*
* Read the disk inode attributes into the in-core inode structure.
*
* For version 5 superblocks, if we are initialising a new inode and we are not
* utilising the XFS_MOUNT_IKEEP inode cluster mode, we can simple build the new
* inode core with a random generation number. If we are keeping inodes around,
* we need to read the inode cluster to get the existing generation number off
* disk. Further, if we are using version 4 superblocks (i.e. v1/v2 inode
* format) then log recovery is dependent on the di_flushiter field being
* initialised from the current on-disk value and hence we must also read the
* inode off disk.
*/
int
xfs_iread(
xfs_mount_t *mp,
xfs_trans_t *tp,
xfs_inode_t *ip,
uint iget_flags)
{
xfs_buf_t *bp;
xfs_dinode_t *dip;
int error;
/*
* Fill in the location information in the in-core inode.
*/
error = xfs_imap(mp, tp, ip->i_ino, &ip->i_imap, iget_flags);
if (error)
return error;
/* shortcut IO on inode allocation if possible */
if ((iget_flags & XFS_IGET_CREATE) &&
xfs_sb_version_hascrc(&mp->m_sb) &&
!(mp->m_flags & XFS_MOUNT_IKEEP)) {
/* initialise the on-disk inode core */
memset(&ip->i_d, 0, sizeof(ip->i_d));
VFS_I(ip)->i_generation = prandom_u32();
if (xfs_sb_version_hascrc(&mp->m_sb))
ip->i_d.di_version = 3;
else
ip->i_d.di_version = 2;
return 0;
}
/*
* Get pointers to the on-disk inode and the buffer containing it.
*/
error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &dip, &bp, 0, iget_flags);
if (error)
return error;
/* even unallocated inodes are verified */
if (!xfs_dinode_verify(mp, ip->i_ino, dip)) {
xfs_alert(mp, "%s: validation failed for inode %lld",
__func__, ip->i_ino);
XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, dip);
error = -EFSCORRUPTED;
goto out_brelse;
}
/*
* If the on-disk inode is already linked to a directory
* entry, copy all of the inode into the in-core inode.
* xfs_iformat_fork() handles copying in the inode format
* specific information.
* Otherwise, just get the truly permanent information.
*/
if (dip->di_mode) {
xfs_inode_from_disk(ip, dip);
error = xfs_iformat_fork(ip, dip);
if (error) {
#ifdef DEBUG
xfs_alert(mp, "%s: xfs_iformat() returned error %d",
__func__, error);
#endif /* DEBUG */
goto out_brelse;
}
} else {
/*
* Partial initialisation of the in-core inode. Just the bits
* that xfs_ialloc won't overwrite or relies on being correct.
*/
ip->i_d.di_version = dip->di_version;
VFS_I(ip)->i_generation = be32_to_cpu(dip->di_gen);
ip->i_d.di_flushiter = be16_to_cpu(dip->di_flushiter);
/*
* Make sure to pull in the mode here as well in
* case the inode is released without being used.
* This ensures that xfs_inactive() will see that
* the inode is already free and not try to mess
* with the uninitialized part of it.
*/
VFS_I(ip)->i_mode = 0;
}
ASSERT(ip->i_d.di_version >= 2);
ip->i_delayed_blks = 0;
/*
* Mark the buffer containing the inode as something to keep
* around for a while. This helps to keep recently accessed
* meta-data in-core longer.
*/
xfs_buf_set_ref(bp, XFS_INO_REF);
/*
* Use xfs_trans_brelse() to release the buffer containing the on-disk
* inode, because it was acquired with xfs_trans_read_buf() in
* xfs_imap_to_bp() above. If tp is NULL, this is just a normal
* brelse(). If we're within a transaction, then xfs_trans_brelse()
* will only release the buffer if it is not dirty within the
* transaction. It will be OK to release the buffer in this case,
* because inodes on disk are never destroyed and we will be locking the
* new in-core inode before putting it in the cache where other
* processes can find it. Thus we don't have to worry about the inode
* being changed just because we released the buffer.
*/
out_brelse:
xfs_trans_brelse(tp, bp);
return error;
}