p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/kernel/debug/debug_core.h

87 lines
2.5 KiB
C
Raw Normal View History

Separate the gdbstub from the debug core Split the former kernel/kgdb.c into debug_core.c which contains the kernel debugger exception logic and to the gdbstub.c which contains the logic for allowing gdb to talk to the debug core. This also created a private include file called debug_core.h which contains all the definitions to glue the debug_core to any other debugger connections. CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-04-03 00:48:03 +08:00
/*
* Created by: Jason Wessel <jason.wessel@windriver.com>
*
* Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef _DEBUG_CORE_H_
#define _DEBUG_CORE_H_
/*
* These are the private implementation headers between the kernel
* debugger core and the debugger front end code.
*/
/* kernel debug core data structures */
struct kgdb_state {
int ex_vector;
int signo;
int err_code;
int cpu;
int pass_exception;
unsigned long thr_query;
unsigned long threadid;
long kgdb_usethreadid;
struct pt_regs *linux_regs;
kdb: Add support for external NMI handler to call KGDB/KDB This patch adds a kgdb_nmicallin() interface that can be used by external NMI handlers to call the KGDB/KDB handler. The primary need for this is for those types of NMI interrupts where all the CPUs have already received the NMI signal. Therefore no send_IPI(NMI) is required, and in fact it will cause a 2nd unhandled NMI to occur. This generates the "Dazed and Confuzed" messages. Since all the CPUs are getting the NMI at roughly the same time, it's not guaranteed that the first CPU that hits the NMI handler will manage to enter KGDB and set the dbg_master_lock before the slaves start entering. The new argument "send_ready" was added for KGDB to signal the NMI handler to release the slave CPUs for entry into KGDB. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20131002151417.928886849@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-02 23:14:18 +08:00
atomic_t *send_ready;
Separate the gdbstub from the debug core Split the former kernel/kgdb.c into debug_core.c which contains the kernel debugger exception logic and to the gdbstub.c which contains the logic for allowing gdb to talk to the debug core. This also created a private include file called debug_core.h which contains all the definitions to glue the debug_core to any other debugger connections. CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-04-03 00:48:03 +08:00
};
/* Exception state values */
#define DCPU_WANT_MASTER 0x1 /* Waiting to become a master kgdb cpu */
#define DCPU_NEXT_MASTER 0x2 /* Transition from one master cpu to another */
#define DCPU_IS_SLAVE 0x4 /* Slave cpu enter exception */
#define DCPU_SSTEP 0x8 /* CPU is single stepping */
struct debuggerinfo_struct {
void *debuggerinfo;
struct task_struct *task;
int exception_state;
kgdb: core changes to support kdb These are the minimum changes to the kgdb core in order to enable an API to connect a new front end (kdb) to the debug core. This patch introduces the dbg_kdb_mode variable controls where the user level I/O is routed. It will be routed to the gdbstub (kgdb) or to the kdb front end which is a simple shell available over the kgdboc connection. You can switch back and forth between kdb or the gdb stub mode of operation dynamically. From gdb stub mode you can blindly type "$3#33", or from the kdb mode you can enter "kgdb" to switch to the gdb stub. The logic in the debug core depends on kdb to look for the typical gdb connection sequences and return immediately with KGDB_PASS_EVENT if a gdb serial command sequence is detected. That should allow a reasonably seamless transition between kdb -> gdb without leaving the kernel exception state. The two gdb serial queries that kdb is responsible for detecting are the "?" and "qSupported" packets. CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Martin Hicks <mort@sgi.com>
2010-05-21 10:04:21 +08:00
int ret_state;
int irq_depth;
debug_core: refactor locking for master/slave cpus For quite some time there have been problems with memory barriers and various races with NMI on multi processor systems using the kernel debugger. The algorithm for entering the kernel debug core and resuming kernel execution was racy and had several known edge case problems with attempting to debug something on a heavily loaded system using breakpoints that are hit repeatedly and quickly. The prior "locking" design entry worked as follows: * The atomic counter kgdb_active was used with atomic exchange in order to elect a master cpu out of all the cpus that may have taken a debug exception. * The master cpu increments all elements of passive_cpu_wait[]. * The master cpu issues the round up cpus message. * Each "slave cpu" that enters the debug core increments its own element in cpu_in_kgdb[]. * Each "slave cpu" spins on passive_cpu_wait[] until it becomes 0. * The master cpu debugs the system. The new scheme removes the two arrays of atomic counters and replaces them with 2 single counters. One counter is used to count the number of cpus waiting to become a master cpu (because one or more hit an exception). The second counter is use to indicate how many cpus have entered as slave cpus. The new entry logic works as follows: * One or more cpus enters via kgdb_handle_exception() and increments the masters_in_kgdb. Each cpu attempts to get the spin lock called dbg_master_lock. * The master cpu sets kgdb_active to the current cpu. * The master cpu takes the spinlock dbg_slave_lock. * The master cpu asks to round up all the other cpus. * Each slave cpu that is not already in kgdb_handle_exception() will enter and increment slaves_in_kgdb. Each slave will now spin try_locking on dbg_slave_lock. * The master cpu waits for the sum of masters_in_kgdb and slaves_in_kgdb to be equal to the sum of the online cpus. * The master cpu debugs the system. In the new design the kgdb_active can only be changed while holding dbg_master_lock. Stress testing has not turned up any further entry/exit races that existed in the prior locking design. The prior locking design suffered from atomic variables not being truly atomic (in the capacity as used by kgdb) along with memory barrier races. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Dongdong Deng <dongdong.deng@windriver.com>
2010-05-21 21:46:00 +08:00
int enter_kgdb;
kgdb: Don't round up a CPU that failed rounding up before If we're using the default implementation of kgdb_roundup_cpus() that uses smp_call_function_single_async() we can end up hanging kgdb_roundup_cpus() if we try to round up a CPU that failed to round up before. Specifically smp_call_function_single_async() will try to wait on the csd lock for the CPU that we're trying to round up. If the previous round up never finished then that lock could still be held and we'll just sit there hanging. There's not a lot of use trying to round up a CPU that failed to round up before. Let's keep a flag that indicates whether the CPU started but didn't finish to round up before. If we see that flag set then we'll skip the next round up. In general we have a few goals here: - We never want to end up calling smp_call_function_single_async() when the csd is still locked. This is accomplished because flush_smp_call_function_queue() unlocks the csd _before_ invoking the callback. That means that when kgdb_nmicallback() runs we know for sure the the csd is no longer locked. Thus when we set "rounding_up = false" we know for sure that the csd is unlocked. - If there are no timeouts rounding up we should never skip a round up. NOTE #1: In general trying to continue running after failing to round up CPUs doesn't appear to be supported in the debugger. When I simulate this I find that kdb reports "Catastrophic error detected" when I try to continue. I can overrule and continue anyway, but it should be noted that we may be entering the land of dragons here. Possibly the "Catastrophic error detected" was added _because_ of the future failure to round up, but even so this is an area of the code that hasn't been strongly tested. NOTE #2: I did a bit of testing before and after this change. I introduced a 10 second hang in the kernel while holding a spinlock that I could invoke on a certain CPU with 'taskset -c 3 cat /sys/...". Before this change if I did: - Invoke hang - Enter debugger - g (which warns about Catastrophic error, g again to go anyway) - g - Enter debugger ...I'd hang the rest of the 10 seconds without getting a debugger prompt. After this change I end up in the debugger the 2nd time after only 1 second with the standard warning about 'Timed out waiting for secondary CPUs.' I'll also note that once the CPU finished waiting I could actually debug it (aka "btc" worked) I won't promise that everything works perfectly if the errant CPU comes back at just the wrong time (like as we're entering or exiting the debugger) but it certainly seems like an improvement. NOTE #3: setting 'kgdb_info[cpu].rounding_up = false' is in kgdb_nmicallback() instead of kgdb_call_nmi_hook() because some implementations override kgdb_call_nmi_hook(). It shouldn't hurt to have it in kgdb_nmicallback() in any case. NOTE #4: this logic is really only needed because there is no API call like "smp_try_call_function_single_async()" or "smp_csd_is_locked()". If such an API existed then we'd use it instead, but it seemed a bit much to add an API like this just for kgdb. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-12-05 11:38:27 +08:00
bool rounding_up;
Separate the gdbstub from the debug core Split the former kernel/kgdb.c into debug_core.c which contains the kernel debugger exception logic and to the gdbstub.c which contains the logic for allowing gdb to talk to the debug core. This also created a private include file called debug_core.h which contains all the definitions to glue the debug_core to any other debugger connections. CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-04-03 00:48:03 +08:00
};
extern struct debuggerinfo_struct kgdb_info[];
/* kernel debug core break point routines */
extern int dbg_remove_all_break(void);
extern int dbg_set_sw_break(unsigned long addr);
extern int dbg_remove_sw_break(unsigned long addr);
extern int dbg_activate_sw_breakpoints(void);
kgdb: core changes to support kdb These are the minimum changes to the kgdb core in order to enable an API to connect a new front end (kdb) to the debug core. This patch introduces the dbg_kdb_mode variable controls where the user level I/O is routed. It will be routed to the gdbstub (kgdb) or to the kdb front end which is a simple shell available over the kgdboc connection. You can switch back and forth between kdb or the gdb stub mode of operation dynamically. From gdb stub mode you can blindly type "$3#33", or from the kdb mode you can enter "kgdb" to switch to the gdb stub. The logic in the debug core depends on kdb to look for the typical gdb connection sequences and return immediately with KGDB_PASS_EVENT if a gdb serial command sequence is detected. That should allow a reasonably seamless transition between kdb -> gdb without leaving the kernel exception state. The two gdb serial queries that kdb is responsible for detecting are the "?" and "qSupported" packets. CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Martin Hicks <mort@sgi.com>
2010-05-21 10:04:21 +08:00
extern int dbg_deactivate_sw_breakpoints(void);
/* polled character access to i/o module */
extern int dbg_io_get_char(void);
/* stub return value for switching between the gdbstub and kdb */
#define DBG_PASS_EVENT -12345
/* Switch from one cpu to another */
#define DBG_SWITCH_CPU_EVENT -123456
extern int dbg_switch_cpu;
Separate the gdbstub from the debug core Split the former kernel/kgdb.c into debug_core.c which contains the kernel debugger exception logic and to the gdbstub.c which contains the logic for allowing gdb to talk to the debug core. This also created a private include file called debug_core.h which contains all the definitions to glue the debug_core to any other debugger connections. CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-04-03 00:48:03 +08:00
/* gdbstub interface functions */
extern int gdb_serial_stub(struct kgdb_state *ks);
extern void gdbstub_msg_write(const char *s, int len);
kgdb: core changes to support kdb These are the minimum changes to the kgdb core in order to enable an API to connect a new front end (kdb) to the debug core. This patch introduces the dbg_kdb_mode variable controls where the user level I/O is routed. It will be routed to the gdbstub (kgdb) or to the kdb front end which is a simple shell available over the kgdboc connection. You can switch back and forth between kdb or the gdb stub mode of operation dynamically. From gdb stub mode you can blindly type "$3#33", or from the kdb mode you can enter "kgdb" to switch to the gdb stub. The logic in the debug core depends on kdb to look for the typical gdb connection sequences and return immediately with KGDB_PASS_EVENT if a gdb serial command sequence is detected. That should allow a reasonably seamless transition between kdb -> gdb without leaving the kernel exception state. The two gdb serial queries that kdb is responsible for detecting are the "?" and "qSupported" packets. CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Martin Hicks <mort@sgi.com>
2010-05-21 10:04:21 +08:00
/* gdbstub functions used for kdb <-> gdbstub transition */
extern int gdbstub_state(struct kgdb_state *ks, char *cmd);
kgdb: gdb "monitor" -> kdb passthrough One of the driving forces behind integrating another front end (kdb) to the debug core is to allow front end commands to be accessible via gdb's monitor command. It is true that you could write gdb macros to get certain data, but you may want to just use gdb to access the commands that are available in the kdb front end. This patch implements the Rcmd gdb stub packet. In gdb you access this with the "monitor" command. For instance you could type "monitor help", "monitor lsmod" or "monitor ps A" etc... There is no error checking or command restrictions on what you can and cannot access at this point. Doing something like trying to set breakpoints with the monitor command is going to cause nothing but problems. Perhaps in the future only the commands that are actually known to work with the gdb monitor command will be available. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-21 10:04:24 +08:00
extern int dbg_kdb_mode;
kgdb: core changes to support kdb These are the minimum changes to the kgdb core in order to enable an API to connect a new front end (kdb) to the debug core. This patch introduces the dbg_kdb_mode variable controls where the user level I/O is routed. It will be routed to the gdbstub (kgdb) or to the kdb front end which is a simple shell available over the kgdboc connection. You can switch back and forth between kdb or the gdb stub mode of operation dynamically. From gdb stub mode you can blindly type "$3#33", or from the kdb mode you can enter "kgdb" to switch to the gdb stub. The logic in the debug core depends on kdb to look for the typical gdb connection sequences and return immediately with KGDB_PASS_EVENT if a gdb serial command sequence is detected. That should allow a reasonably seamless transition between kdb -> gdb without leaving the kernel exception state. The two gdb serial queries that kdb is responsible for detecting are the "?" and "qSupported" packets. CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Martin Hicks <mort@sgi.com>
2010-05-21 10:04:21 +08:00
#ifdef CONFIG_KGDB_KDB
extern int kdb_stub(struct kgdb_state *ks);
kgdb: gdb "monitor" -> kdb passthrough One of the driving forces behind integrating another front end (kdb) to the debug core is to allow front end commands to be accessible via gdb's monitor command. It is true that you could write gdb macros to get certain data, but you may want to just use gdb to access the commands that are available in the kdb front end. This patch implements the Rcmd gdb stub packet. In gdb you access this with the "monitor" command. For instance you could type "monitor help", "monitor lsmod" or "monitor ps A" etc... There is no error checking or command restrictions on what you can and cannot access at this point. Doing something like trying to set breakpoints with the monitor command is going to cause nothing but problems. Perhaps in the future only the commands that are actually known to work with the gdb monitor command will be available. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-21 10:04:24 +08:00
extern int kdb_parse(const char *cmdstr);
kdb: Setup basic kdb state before invoking commands via kgdb Although invasive kdb commands are not supported via kgdb, some useful non-invasive commands like bt* require basic kdb state to be setup before calling into the kdb code. Factor out some of this code and call it before and after executing kdb commands via kgdb. Signed-off-by: Matt Klein <mklein@twitter.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-01-03 05:20:49 +08:00
extern int kdb_common_init_state(struct kgdb_state *ks);
extern int kdb_common_deinit_state(void);
kgdb: core changes to support kdb These are the minimum changes to the kgdb core in order to enable an API to connect a new front end (kdb) to the debug core. This patch introduces the dbg_kdb_mode variable controls where the user level I/O is routed. It will be routed to the gdbstub (kgdb) or to the kdb front end which is a simple shell available over the kgdboc connection. You can switch back and forth between kdb or the gdb stub mode of operation dynamically. From gdb stub mode you can blindly type "$3#33", or from the kdb mode you can enter "kgdb" to switch to the gdb stub. The logic in the debug core depends on kdb to look for the typical gdb connection sequences and return immediately with KGDB_PASS_EVENT if a gdb serial command sequence is detected. That should allow a reasonably seamless transition between kdb -> gdb without leaving the kernel exception state. The two gdb serial queries that kdb is responsible for detecting are the "?" and "qSupported" packets. CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Martin Hicks <mort@sgi.com>
2010-05-21 10:04:21 +08:00
#else /* ! CONFIG_KGDB_KDB */
static inline int kdb_stub(struct kgdb_state *ks)
{
return DBG_PASS_EVENT;
}
#endif /* CONFIG_KGDB_KDB */
Separate the gdbstub from the debug core Split the former kernel/kgdb.c into debug_core.c which contains the kernel debugger exception logic and to the gdbstub.c which contains the logic for allowing gdb to talk to the debug core. This also created a private include file called debug_core.h which contains all the definitions to glue the debug_core to any other debugger connections. CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-04-03 00:48:03 +08:00
#endif /* _DEBUG_CORE_H_ */