linux_old1/arch/arm/mach-shmobile/board-bockw.c

742 lines
18 KiB
C
Raw Normal View History

/*
* Bock-W board support
*
* Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
* Copyright (C) 2013-2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mtd/partitions.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/usb-rcar-phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb/renesas_usbhs.h>
#include <media/soc_camera.h>
#include <asm/mach/arch.h>
#include <sound/rcar_snd.h>
#include <sound/simple_card.h>
#include "common.h"
#include "irqs.h"
#include "r8a7778.h"
#define FPGA 0x18200000
#define IRQ0MR 0x30
#define COMCTLR 0x101c
static void __iomem *fpga;
/*
* CN9(Upper side) SCIF/RCAN selection
*
* 1,4 3,6
* SW40 SCIF RCAN
* SW41 SCIF RCAN
*/
/*
* MMC (CN26) pin
*
* SW6 (D2) 3 pin
* SW7 (D5) ON
* SW8 (D3) 3 pin
* SW10 (D4) 1 pin
* SW12 (CLK) 1 pin
* SW13 (D6) 3 pin
* SW14 (CMD) ON
* SW15 (D6) 1 pin
* SW16 (D0) ON
* SW17 (D1) ON
* SW18 (D7) 3 pin
* SW19 (MMC) 1 pin
*/
/*
* SSI settings
*
* SW45: 1-4 side (SSI5 out, ROUT/LOUT CN19 Mid)
* SW46: 1101 (SSI6 Recorde)
* SW47: 1110 (SSI5 Playback)
* SW48: 11 (Recorde power)
* SW49: 1 (SSI slave mode)
* SW50: 1111 (SSI7, SSI8)
* SW51: 1111 (SSI3, SSI4)
* SW54: 1pin (ak4554 FPGA control)
* SW55: 1 (CLKB is 24.5760MHz)
* SW60: 1pin (ak4554 FPGA control)
* SW61: 3pin (use X11 clock)
* SW78: 3-6 (ak4642 connects I2C0)
*
* You can use sound as
*
* hw0: CN19: SSI56-AK4643
* hw1: CN21: SSI3-AK4554(playback)
* hw2: CN21: SSI4-AK4554(capture)
* hw3: CN20: SSI7-AK4554(playback)
* hw4: CN20: SSI8-AK4554(capture)
*
* this command is required when playback on hw0.
*
* # amixer set "LINEOUT Mixer DACL" on
*/
/*
* USB
*
* USB1 (CN29) can be Host/Function
*
* Host Func
* SW98 1 2
* SW99 1 3
*/
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
};
static struct smsc911x_platform_config smsc911x_data __initdata = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_32BIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct resource smsc911x_resources[] __initdata = {
DEFINE_RES_MEM(0x18300000, 0x1000),
DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
};
#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
/*
* When USB1 is Func
*/
static int usbhsf_get_id(struct platform_device *pdev)
{
return USBHS_GADGET;
}
#define SUSPMODE 0x102
static int usbhsf_power_ctrl(struct platform_device *pdev,
void __iomem *base, int enable)
{
enable = !!enable;
r8a7778_usb_phy_power(enable);
iowrite16(enable << 14, base + SUSPMODE);
return 0;
}
static struct resource usbhsf_resources[] __initdata = {
DEFINE_RES_MEM(0xffe60000, 0x110),
DEFINE_RES_IRQ(gic_iid(0x4f)),
};
static struct renesas_usbhs_platform_info usbhs_info __initdata = {
.platform_callback = {
.get_id = usbhsf_get_id,
.power_ctrl = usbhsf_power_ctrl,
},
.driver_param = {
.buswait_bwait = 4,
.d0_tx_id = HPBDMA_SLAVE_USBFUNC_TX,
.d1_rx_id = HPBDMA_SLAVE_USBFUNC_RX,
},
};
#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,}
#define USB1_DEVICE "renesas_usbhs"
#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() \
platform_device_register_resndata( \
NULL, "renesas_usbhs", -1, \
usbhsf_resources, \
ARRAY_SIZE(usbhsf_resources), \
&usbhs_info, sizeof(struct renesas_usbhs_platform_info))
#else
/*
* When USB1 is Host
*/
#define USB_PHY_SETTING { }
#define USB1_DEVICE "ehci-platform"
#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()
#endif
ARM SoC board specific changes These are 18 branches on 9 platforms with board specific changes, mostly for defconfig files, but nothing really exciting in here. Since the shmobile platform still uses board files for some of the newer machines, we get a few changes there as the result of drivers getting enabled for those boards. This causes some conflicts with contents getting added from multiple branches in sh-mobile specific files. Renesas is putting a lot of work into migrating to device-tree based setup, which will make all those files obsolete in the future and avoid both the conflicts and the need to have these files in the first place. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUdLnmmCrR//JCVInAQKNuxAAxXpBslUGRpI8O28KHA3EeL+9HR5wBoKo K6q6fQlAv9dcGJOx7fkyHU4UfE1kV+M6l4R9BM8VcjflQjCnG4GrQo8qgJNY14nf OpQKSIHEtdBHzFpHEIxogByR1i05hL8nrm21TElgi/aYlDwKbXnApY23ubApPif4 oXmES9ppXvnz1D7bCE7PaZf+TIgufpPFkioQYcV93nD0x5tYu1mZn2xSfYDekAyU mUe1p2oX+77U0lohVQCo1H/ZOJBdoAN1U//2QCiL8YKJitQf/vOVs3QtHEUywIiU CyUaDhfM7sX4QKBWzwjxoVOcT6QC/qhaaqaases0gjgjepKaSqUTZMBdLI7oyF3o 2ExYv8BMGilbIyNUYoxeoqz9zA3IQ7wDxaBh3G1JY9k0/BhKmsEwtGYkSJPdOgpt XyX7N/xKzy0lTWf1N4eSWUiccfXdVjLFf3Jp2xA7e/KJfzFAF/RJXdGiV2Kzdr7m mZ7ESYRk+S3ENgpI/QI4C6kQ7EBynQjhn5t2+iK9k4gKNspNZ3TjLCQif0v0xE3H IIsaSqLBuj9IZ1r13fpQJZIyTr+dHsx2s6QQBFXYzeQ/cjfSRGZP4FmYyweGctfR Hh1AAshrOAwNl4ZdXgIT08JKtBocaGFUtt4syvPfAFYoojMN58xg5EG4FYtKpKHp xU6w43o6KnQ= =7bgc -----END PGP SIGNATURE----- Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board specific changes from Arnd Bergmann: "These are 18 branches on 9 platforms with board specific changes, mostly for defconfig files, but nothing really exciting in here. Since the shmobile platform still uses board files for some of the newer machines, we get a few changes there as the result of drivers getting enabled for those boards. This causes some conflicts with contents getting added from multiple branches in sh-mobile specific files. Renesas is putting a lot of work into migrating to device-tree based setup, which will make all those files obsolete in the future and avoid both the conflicts and the need to have these files in the first place." * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits) arm: multi_v7_defconfig: Enable initrd/initramfs support arm: multi_v7_defconfig: Enable Zynq UART driver ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV ARM: OMAP1: nokia770: enable Tahvo ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN arm: omap: board-overo: reset GPIO for SMSC911x ARM: shmobile: BOCK-W: change Ether device name ARM: ux500: board-mop500: remove unused pin modes ARM: shmobile: bockw: add MMCIF support ARM: shmobile: bockw: add SPI FLASH support ARM: shmobile: bockw: add I2C device support ARM: shmobile: BOCK-W: add Ether support ARM: tegra: defconfig updates ARM: shmobile: bockw defconfig: add MMCIF support ARM: shmobile: bockw defconfig: add M25P80 support ARM: shmobile: bockw defconfig: add RTC RX8581 support ARM: shmobile: marzen: keep local function as static ARM: shmobile: bockw: add SDHI0 support ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC ARM: shmobile: lager: support GPIO switches ...
2013-07-03 05:10:26 +08:00
/* USB */
static struct resource usb_phy_resources[] __initdata = {
DEFINE_RES_MEM(0xffe70800, 0x100),
DEFINE_RES_MEM(0xffe76000, 0x100),
};
static struct rcar_phy_platform_data usb_phy_platform_data __initdata =
USB_PHY_SETTING;
/* SDHI */
static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
.dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX,
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
};
static struct resource sdhi0_resources[] __initdata = {
DEFINE_RES_MEM(0xFFE4C000, 0x100),
DEFINE_RES_IRQ(gic_iid(0x77)),
};
/* Ether */
static struct resource ether_resources[] __initdata = {
DEFINE_RES_MEM(0xfde00000, 0x400),
DEFINE_RES_IRQ(gic_iid(0x89)),
};
static struct sh_eth_plat_data ether_platform_data __initdata = {
.phy = 0x01,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
.phy_interface = PHY_INTERFACE_MODE_RMII,
/*
* Although the LINK signal is available on the board, it's connected to
* the link/activity LED output of the PHY, thus the link disappears and
* reappears after each packet. We'd be better off ignoring such signal
* and getting the link state from the PHY indirectly.
*/
.no_ether_link = 1,
};
static struct platform_device_info ether_info __initdata = {
.name = "r8a777x-ether",
.id = -1,
.res = ether_resources,
.num_res = ARRAY_SIZE(ether_resources),
.data = &ether_platform_data,
.size_data = sizeof(ether_platform_data),
.dma_mask = DMA_BIT_MASK(32),
};
/* I2C */
static struct i2c_board_info i2c0_devices[] = {
{
I2C_BOARD_INFO("rx8581", 0x51),
}, {
I2C_BOARD_INFO("ak4643", 0x12),
}
};
/* HSPI*/
static struct mtd_partition m25p80_spi_flash_partitions[] = {
{
.name = "data(spi)",
.size = 0x0100000,
.offset = 0,
},
};
static struct flash_platform_data spi_flash_data = {
.name = "m25p80",
.type = "s25fl008k",
.parts = m25p80_spi_flash_partitions,
.nr_parts = ARRAY_SIZE(m25p80_spi_flash_partitions),
};
static struct spi_board_info spi_board_info[] __initdata = {
{
.modalias = "m25p80",
.max_speed_hz = 104000000,
.chip_select = 0,
.bus_num = 0,
.mode = SPI_MODE_0,
.platform_data = &spi_flash_data,
},
};
/* MMC */
static struct resource mmc_resources[] __initdata = {
DEFINE_RES_MEM(0xffe4e000, 0x100),
DEFINE_RES_IRQ(gic_iid(0x5d)),
};
static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
.sup_pclk = 0,
.caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
};
/* In the default configuration both decoders reside on I2C bus 0 */
#define BOCKW_CAMERA(idx) \
static struct i2c_board_info camera##idx##_info = { \
I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)), \
}; \
\
static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = { \
.bus_id = idx, \
.i2c_adapter_id = 0, \
.board_info = &camera##idx##_info, \
}
BOCKW_CAMERA(0);
BOCKW_CAMERA(1);
/* VIN */
static struct rcar_vin_platform_data vin_platform_data __initdata = {
.flags = RCAR_VIN_BT656,
};
#define R8A7778_VIN(idx) \
static struct resource vin##idx##_resources[] __initdata = { \
DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
DEFINE_RES_IRQ(gic_iid(0x5a)), \
}; \
\
static struct platform_device_info vin##idx##_info __initdata = { \
.name = "r8a7778-vin", \
.id = idx, \
.res = vin##idx##_resources, \
.num_res = ARRAY_SIZE(vin##idx##_resources), \
.dma_mask = DMA_BIT_MASK(32), \
.data = &vin_platform_data, \
.size_data = sizeof(vin_platform_data), \
}
R8A7778_VIN(0);
R8A7778_VIN(1);
/* Sound */
static struct resource rsnd_resources[] __initdata = {
[RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000),
[RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240),
[RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24),
};
static struct rsnd_ssi_platform_info rsnd_ssi[] = {
RSND_SSI_UNUSED, /* SSI 0 */
RSND_SSI_UNUSED, /* SSI 1 */
RSND_SSI_UNUSED, /* SSI 2 */
RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0),
RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0),
RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0),
RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
};
static struct rsnd_src_platform_info rsnd_src[9] = {
RSND_SRC_UNUSED, /* SRU 0 */
RSND_SRC_UNUSED, /* SRU 1 */
RSND_SRC_UNUSED, /* SRU 2 */
RSND_SRC(0, 0),
RSND_SRC(0, 0),
RSND_SRC(0, 0),
RSND_SRC(0, 0),
RSND_SRC(0, 0),
RSND_SRC(0, 0),
};
static struct rsnd_dai_platform_info rsnd_dai[] = {
{
.playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] },
.capture = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] },
}, {
.playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] },
}, {
.capture = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] },
}, {
.playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] },
}, {
.capture = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] },
},
};
enum {
AK4554_34 = 0,
AK4643_56,
AK4554_78,
SOUND_MAX,
};
static int rsnd_codec_power(int id, int enable)
{
static int sound_user[SOUND_MAX] = {0, 0, 0};
int *usr = NULL;
u32 bit;
switch (id) {
case 3:
case 4:
usr = sound_user + AK4554_34;
bit = (1 << 10);
break;
case 5:
case 6:
usr = sound_user + AK4643_56;
bit = (1 << 6);
break;
case 7:
case 8:
usr = sound_user + AK4554_78;
bit = (1 << 7);
break;
}
if (!usr)
return -EIO;
if (enable) {
if (*usr == 0) {
u32 val = ioread16(fpga + COMCTLR);
val &= ~bit;
iowrite16(val, fpga + COMCTLR);
}
(*usr)++;
} else {
if (*usr == 0)
return 0;
(*usr)--;
if (*usr == 0) {
u32 val = ioread16(fpga + COMCTLR);
val |= bit;
iowrite16(val, fpga + COMCTLR);
}
}
return 0;
}
static int rsnd_start(int id)
{
return rsnd_codec_power(id, 1);
}
static int rsnd_stop(int id)
{
return rsnd_codec_power(id, 0);
}
static struct rcar_snd_info rsnd_info = {
.flags = RSND_GEN1,
.ssi_info = rsnd_ssi,
.ssi_info_nr = ARRAY_SIZE(rsnd_ssi),
.src_info = rsnd_src,
.src_info_nr = ARRAY_SIZE(rsnd_src),
.dai_info = rsnd_dai,
.dai_info_nr = ARRAY_SIZE(rsnd_dai),
.start = rsnd_start,
.stop = rsnd_stop,
};
static struct asoc_simple_card_info rsnd_card_info[] = {
/* SSI5, SSI6 */
{
.name = "AK4643",
.card = "SSI56-AK4643",
.codec = "ak4642-codec.0-0012",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
.cpu_dai = {
.name = "rsnd-dai.0",
},
.codec_dai = {
.name = "ak4642-hifi",
.sysclk = 11289600,
},
},
/* SSI3 */
{
.name = "AK4554",
.card = "SSI3-AK4554(playback)",
.codec = "ak4554-adc-dac.0",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
.cpu_dai = {
.name = "rsnd-dai.1",
},
.codec_dai = {
.name = "ak4554-hifi",
},
},
/* SSI4 */
{
.name = "AK4554",
.card = "SSI4-AK4554(capture)",
.codec = "ak4554-adc-dac.0",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
.cpu_dai = {
.name = "rsnd-dai.2",
},
.codec_dai = {
.name = "ak4554-hifi",
},
},
/* SSI7 */
{
.name = "AK4554",
.card = "SSI7-AK4554(playback)",
.codec = "ak4554-adc-dac.1",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
.cpu_dai = {
.name = "rsnd-dai.3",
},
.codec_dai = {
.name = "ak4554-hifi",
},
},
/* SSI8 */
{
.name = "AK4554",
.card = "SSI8-AK4554(capture)",
.codec = "ak4554-adc-dac.1",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
.cpu_dai = {
.name = "rsnd-dai.4",
},
.codec_dai = {
.name = "ak4554-hifi",
},
}
};
static const struct pinctrl_map bockw_pinctrl_map[] = {
/* AUDIO */
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"audio_clk_a", "audio_clk"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"audio_clk_b", "audio_clk"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi34_ctrl", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi3_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi4_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi5_ctrl", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi5_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi6_ctrl", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi6_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi78_ctrl", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi7_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi8_data", "ssi"),
/* Ether */
PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
"ether_rmii", "ether"),
/* HSPI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778",
"hspi0_a", "hspi0"),
/* MMC */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
"mmc_data8", "mmc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
"mmc_ctrl", "mmc"),
/* SCIF0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
"scif0_data_a", "scif0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
"scif0_ctrl", "scif0"),
ARM SoC board specific changes These are 18 branches on 9 platforms with board specific changes, mostly for defconfig files, but nothing really exciting in here. Since the shmobile platform still uses board files for some of the newer machines, we get a few changes there as the result of drivers getting enabled for those boards. This causes some conflicts with contents getting added from multiple branches in sh-mobile specific files. Renesas is putting a lot of work into migrating to device-tree based setup, which will make all those files obsolete in the future and avoid both the conflicts and the need to have these files in the first place. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUdLnmmCrR//JCVInAQKNuxAAxXpBslUGRpI8O28KHA3EeL+9HR5wBoKo K6q6fQlAv9dcGJOx7fkyHU4UfE1kV+M6l4R9BM8VcjflQjCnG4GrQo8qgJNY14nf OpQKSIHEtdBHzFpHEIxogByR1i05hL8nrm21TElgi/aYlDwKbXnApY23ubApPif4 oXmES9ppXvnz1D7bCE7PaZf+TIgufpPFkioQYcV93nD0x5tYu1mZn2xSfYDekAyU mUe1p2oX+77U0lohVQCo1H/ZOJBdoAN1U//2QCiL8YKJitQf/vOVs3QtHEUywIiU CyUaDhfM7sX4QKBWzwjxoVOcT6QC/qhaaqaases0gjgjepKaSqUTZMBdLI7oyF3o 2ExYv8BMGilbIyNUYoxeoqz9zA3IQ7wDxaBh3G1JY9k0/BhKmsEwtGYkSJPdOgpt XyX7N/xKzy0lTWf1N4eSWUiccfXdVjLFf3Jp2xA7e/KJfzFAF/RJXdGiV2Kzdr7m mZ7ESYRk+S3ENgpI/QI4C6kQ7EBynQjhn5t2+iK9k4gKNspNZ3TjLCQif0v0xE3H IIsaSqLBuj9IZ1r13fpQJZIyTr+dHsx2s6QQBFXYzeQ/cjfSRGZP4FmYyweGctfR Hh1AAshrOAwNl4ZdXgIT08JKtBocaGFUtt4syvPfAFYoojMN58xg5EG4FYtKpKHp xU6w43o6KnQ= =7bgc -----END PGP SIGNATURE----- Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board specific changes from Arnd Bergmann: "These are 18 branches on 9 platforms with board specific changes, mostly for defconfig files, but nothing really exciting in here. Since the shmobile platform still uses board files for some of the newer machines, we get a few changes there as the result of drivers getting enabled for those boards. This causes some conflicts with contents getting added from multiple branches in sh-mobile specific files. Renesas is putting a lot of work into migrating to device-tree based setup, which will make all those files obsolete in the future and avoid both the conflicts and the need to have these files in the first place." * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits) arm: multi_v7_defconfig: Enable initrd/initramfs support arm: multi_v7_defconfig: Enable Zynq UART driver ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV ARM: OMAP1: nokia770: enable Tahvo ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN arm: omap: board-overo: reset GPIO for SMSC911x ARM: shmobile: BOCK-W: change Ether device name ARM: ux500: board-mop500: remove unused pin modes ARM: shmobile: bockw: add MMCIF support ARM: shmobile: bockw: add SPI FLASH support ARM: shmobile: bockw: add I2C device support ARM: shmobile: BOCK-W: add Ether support ARM: tegra: defconfig updates ARM: shmobile: bockw defconfig: add MMCIF support ARM: shmobile: bockw defconfig: add M25P80 support ARM: shmobile: bockw defconfig: add RTC RX8581 support ARM: shmobile: marzen: keep local function as static ARM: shmobile: bockw: add SDHI0 support ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC ARM: shmobile: lager: support GPIO switches ...
2013-07-03 05:10:26 +08:00
/* USB */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
"usb0", "usb0"),
PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778",
"usb1", "usb1"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
"sdhi0_wp", "sdhi0"),
/* VIN0 */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
"vin0_clk", "vin0"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
"vin0_data8", "vin0"),
/* VIN1 */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
"vin1_clk", "vin1"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
"vin1_data8", "vin1"),
};
#define PFC 0xfffc0000
#define PUPR4 0x110
static void __init bockw_init(void)
{
void __iomem *base;
struct clk *clk;
struct platform_device *pdev;
int i;
r8a7778_clock_init();
r8a7778_init_irq_extpin(1);
r8a7778_add_standard_devices();
platform_device_register_full(&ether_info);
platform_device_register_full(&vin0_info);
/* VIN1 has a pin conflict with Ether */
if (!IS_ENABLED(CONFIG_SH_ETH))
platform_device_register_full(&vin1_info);
platform_device_register_data(NULL, "soc-camera-pdrv", 0,
&iclink0_ml86v7667,
sizeof(iclink0_ml86v7667));
platform_device_register_data(NULL, "soc-camera-pdrv", 1,
&iclink1_ml86v7667,
sizeof(iclink1_ml86v7667));
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
spi_register_board_info(spi_board_info,
ARRAY_SIZE(spi_board_info));
pinctrl_register_mappings(bockw_pinctrl_map,
ARRAY_SIZE(bockw_pinctrl_map));
r8a7778_pinmux_init();
platform_device_register_resndata(
NULL, "sh_mmcif", -1,
mmc_resources, ARRAY_SIZE(mmc_resources),
&sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));
platform_device_register_resndata(
NULL, "rcar_usb_phy", -1,
usb_phy_resources,
ARRAY_SIZE(usb_phy_resources),
&usb_phy_platform_data,
sizeof(struct rcar_phy_platform_data));
regulator_register_fixed(0, dummy_supplies,
ARRAY_SIZE(dummy_supplies));
regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
/* for SMSC */
fpga = ioremap_nocache(FPGA, SZ_1M);
if (fpga) {
/*
* CAUTION
*
* IRQ0/1 is cascaded interrupt from FPGA.
* it should be cared in the future
* Now, it is assuming IRQ0 was used only from SMSC.
*/
u16 val = ioread16(fpga + IRQ0MR);
val &= ~(1 << 4); /* enable SMSC911x */
iowrite16(val, fpga + IRQ0MR);
platform_device_register_resndata(
NULL, "smsc911x", -1,
smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
&smsc911x_data, sizeof(smsc911x_data));
}
/* for SDHI */
base = ioremap_nocache(PFC, 0x200);
if (base) {
/*
* FIXME
*
* SDHI CD/WP pin needs pull-up
*/
iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
iounmap(base);
platform_device_register_resndata(
NULL, "sh_mobile_sdhi", 0,
sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
}
/* for Audio */
rsnd_codec_power(5, 1); /* enable ak4642 */
platform_device_register_simple(
"ak4554-adc-dac", 0, NULL, 0);
platform_device_register_simple(
"ak4554-adc-dac", 1, NULL, 0);
pdev = platform_device_register_resndata(
NULL, "rcar_sound", -1,
rsnd_resources, ARRAY_SIZE(rsnd_resources),
&rsnd_info, sizeof(rsnd_info));
clk = clk_get(&pdev->dev, "clk_b");
clk_set_rate(clk, 24576000);
clk_put(clk);
for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
struct platform_device_info cardinfo = {
.name = "asoc-simple-card",
.id = i,
.data = &rsnd_card_info[i],
.size_data = sizeof(struct asoc_simple_card_info),
.dma_mask = DMA_BIT_MASK(32),
};
platform_device_register_full(&cardinfo);
}
}
static void __init bockw_init_late(void)
{
r8a7778_init_late();
ADD_USB_FUNC_DEVICE_IF_POSSIBLE();
}
static const char *bockw_boards_compat_dt[] __initdata = {
"renesas,bockw",
NULL,
};
DT_MACHINE_START(BOCKW_DT, "bockw")
.init_early = r8a7778_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_machine = bockw_init,
.dt_compat = bockw_boards_compat_dt,
.init_late = bockw_init_late,
MACHINE_END