p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/arch/tile/kernel/entry.S

65 lines
2.1 KiB
ArmAsm
Raw Normal View History

arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
/*
* Copyright 2010 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
#include <linux/linkage.h>
arch/tile: Miscellaneous cleanup changes. This commit is primarily changes caused by reviewing "sparse" and "checkpatch" output on our sources, so is somewhat noisy, since things like "printk() -> pr_err()" (or whatever) throughout the codebase tend to get tedious to read. Rather than trying to tease apart precisely which things changed due to which type of code review, this commit includes various cleanups in the code: - sparse: Add declarations in headers for globals. - sparse: Fix __user annotations. - sparse: Using gfp_t consistently instead of int. - sparse: removing functions not actually used. - checkpatch: Clean up printk() warnings by using pr_info(), etc.; also avoid partial-line printks except in bootup code. - checkpatch: Use exposed structs rather than typedefs. - checkpatch: Change some C99 comments to C89 comments. In addition, a couple of minor other changes are rolled in to this commit: - Add support for a "raise" instruction to cause SIGFPE, etc., to be raised. - Remove some compat code that is unnecessary when we fully eliminate some of the deprecated syscalls from the generic syscall ABI. - Update the tile_defconfig to reflect current config contents. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 05:04:17 +08:00
#include <linux/unistd.h>
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
#include <asm/irqflags.h>
arch/tile: parameterize system PLs to support KVM port While not a port to KVM (yet), this change modifies the kernel to be able to build either at PL1 or at PL2 with a suitable config switch. Pushing up this change avoids handling branch merge issues going forward with the KVM work. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-10-15 04:23:03 +08:00
#include <asm/processor.h>
arch/tile: Miscellaneous cleanup changes. This commit is primarily changes caused by reviewing "sparse" and "checkpatch" output on our sources, so is somewhat noisy, since things like "printk() -> pr_err()" (or whatever) throughout the codebase tend to get tedious to read. Rather than trying to tease apart precisely which things changed due to which type of code review, this commit includes various cleanups in the code: - sparse: Add declarations in headers for globals. - sparse: Fix __user annotations. - sparse: Using gfp_t consistently instead of int. - sparse: removing functions not actually used. - checkpatch: Clean up printk() warnings by using pr_info(), etc.; also avoid partial-line printks except in bootup code. - checkpatch: Use exposed structs rather than typedefs. - checkpatch: Change some C99 comments to C89 comments. In addition, a couple of minor other changes are rolled in to this commit: - Add support for a "raise" instruction to cause SIGFPE, etc., to be raised. - Remove some compat code that is unnecessary when we fully eliminate some of the deprecated syscalls from the generic syscall ABI. - Update the tile_defconfig to reflect current config contents. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 05:04:17 +08:00
#include <arch/abi.h>
arch/tile: parameterize system PLs to support KVM port While not a port to KVM (yet), this change modifies the kernel to be able to build either at PL1 or at PL2 with a suitable config switch. Pushing up this change avoids handling branch merge issues going forward with the KVM work. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-10-15 04:23:03 +08:00
#include <arch/spr_def.h>
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
#ifdef __tilegx__
#define bnzt bnezt
#endif
STD_ENTRY(current_text_addr)
{ move r0, lr; jrp lr }
STD_ENDPROC(current_text_addr)
STD_ENTRY(KBacktraceIterator_init_current)
{ move r2, lr; lnk r1 }
{ move r4, r52; addli r1, r1, KBacktraceIterator_init_current - . }
{ move r3, sp; j _KBacktraceIterator_init_current }
jrp lr /* keep backtracer happy */
STD_ENDPROC(KBacktraceIterator_init_current)
/* Loop forever on a nap during SMP boot. */
STD_ENTRY(smp_nap)
nap
arch/tile: add "nop" after "nap" to help GX idle power draw This avoids the hardware istream prefetcher doing unnecessary work. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-30 03:57:18 +08:00
nop /* avoid provoking the icache prefetch with a jump */
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
j smp_nap /* we are not architecturally guaranteed not to exit nap */
jrp lr /* clue in the backtracer */
STD_ENDPROC(smp_nap)
/*
* Enable interrupts racelessly and then nap until interrupted.
arch/tile: use a cleaner technique to enable interrupt for cpu_idle() Previously we used iret to atomically return to kernel PL with interrupts enabled. However, it turns out that we are architecturally guaranteed that we can just set and clear the "interrupt critical section" and only interrupt on the following instruction, so we now do that instead, since it's cleaner. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-01 04:22:40 +08:00
* Architecturally, we are guaranteed that enabling interrupts via
* mtspr to INTERRUPT_CRITICAL_SECTION only interrupts at the next PC.
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
* This function's _cpu_idle_nap address is special; see intvec.S.
* When interrupted at _cpu_idle_nap, we bump the PC forward 8, and
* as a result return to the function that called _cpu_idle().
*/
STD_ENTRY(_cpu_idle)
arch/tile: use a cleaner technique to enable interrupt for cpu_idle() Previously we used iret to atomically return to kernel PL with interrupts enabled. However, it turns out that we are architecturally guaranteed that we can just set and clear the "interrupt critical section" and only interrupt on the following instruction, so we now do that instead, since it's cleaner. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-01 04:22:40 +08:00
movei r1, 1
arch/tile: use interrupt critical sections less In general we want to avoid ever touching memory while within an interrupt critical section, since the page fault path goes through a different path from the hypervisor when in an interrupt critical section, and we carefully decided with tilegx that we didn't need to support this path in the kernel. (On tilepro we did implement that path as part of supporting atomic instructions in software.) In practice we always need to touch the kernel stack, since that's where we store the interrupt state before releasing the critical section, but this change cleans up a few things. The IRQ_ENABLE macro is split up so that when we want to enable interrupts in a deferred way (e.g. for cpu_idle or for interrupt return) we can read the per-cpu enable mask before entering the critical section. The cache-migration code is changed to use interrupt masking instead of interrupt critical sections. And, the interrupt-entry code is changed so that we defer loading "tp" from per-cpu data until after we have released the interrupt critical section. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-28 03:40:20 +08:00
IRQ_ENABLE_LOAD(r2, r3)
arch/tile: use a cleaner technique to enable interrupt for cpu_idle() Previously we used iret to atomically return to kernel PL with interrupts enabled. However, it turns out that we are architecturally guaranteed that we can just set and clear the "interrupt critical section" and only interrupt on the following instruction, so we now do that instead, since it's cleaner. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-01 04:22:40 +08:00
mtspr INTERRUPT_CRITICAL_SECTION, r1
arch/tile: use interrupt critical sections less In general we want to avoid ever touching memory while within an interrupt critical section, since the page fault path goes through a different path from the hypervisor when in an interrupt critical section, and we carefully decided with tilegx that we didn't need to support this path in the kernel. (On tilepro we did implement that path as part of supporting atomic instructions in software.) In practice we always need to touch the kernel stack, since that's where we store the interrupt state before releasing the critical section, but this change cleans up a few things. The IRQ_ENABLE macro is split up so that when we want to enable interrupts in a deferred way (e.g. for cpu_idle or for interrupt return) we can read the per-cpu enable mask before entering the critical section. The cache-migration code is changed to use interrupt masking instead of interrupt critical sections. And, the interrupt-entry code is changed so that we defer loading "tp" from per-cpu data until after we have released the interrupt critical section. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-28 03:40:20 +08:00
IRQ_ENABLE_APPLY(r2, r3) /* unmask, but still with ICS set */
arch/tile: use a cleaner technique to enable interrupt for cpu_idle() Previously we used iret to atomically return to kernel PL with interrupts enabled. However, it turns out that we are architecturally guaranteed that we can just set and clear the "interrupt critical section" and only interrupt on the following instruction, so we now do that instead, since it's cleaner. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-01 04:22:40 +08:00
mtspr INTERRUPT_CRITICAL_SECTION, zero
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
.global _cpu_idle_nap
_cpu_idle_nap:
nap
arch/tile: add "nop" after "nap" to help GX idle power draw This avoids the hardware istream prefetcher doing unnecessary work. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-30 03:57:18 +08:00
nop /* avoid provoking the icache prefetch with a jump */
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
jrp lr
STD_ENDPROC(_cpu_idle)