linux_old1/drivers/of/of_mdio.c

523 lines
14 KiB
C
Raw Normal View History

/*
* OF helpers for the MDIO (Ethernet PHY) API
*
* Copyright (c) 2009 Secret Lab Technologies, Ltd.
*
* This file is released under the GPLv2
*
* This file provides helper functions for extracting PHY device information
* out of the OpenFirmware device tree and using it to populate an mii_bus.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/netdevice.h>
#include <linux/err.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/module.h>
#define DEFAULT_GPIO_RESET_DELAY 10 /* in microseconds */
MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
MODULE_LICENSE("GPL");
/* Extract the clause 22 phy ID from the compatible string of the form
* ethernet-phy-idAAAA.BBBB */
static int of_get_phy_id(struct device_node *device, u32 *phy_id)
{
struct property *prop;
const char *cp;
unsigned int upper, lower;
of_property_for_each_string(device, "compatible", prop, cp) {
if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) {
*phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
return 0;
}
}
return -EINVAL;
}
static int of_mdiobus_register_phy(struct mii_bus *mdio,
struct device_node *child, u32 addr)
{
struct phy_device *phy;
bool is_c45;
int rc;
u32 phy_id;
is_c45 = of_device_is_compatible(child,
"ethernet-phy-ieee802.3-c45");
if (!is_c45 && !of_get_phy_id(child, &phy_id))
phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
else
phy = get_phy_device(mdio, addr, is_c45);
if (IS_ERR(phy))
return PTR_ERR(phy);
rc = of_irq_get(child, 0);
if (rc == -EPROBE_DEFER) {
phy_device_free(phy);
return rc;
}
if (rc > 0) {
phy->irq = rc;
mdio->irq[addr] = rc;
} else {
phy->irq = mdio->irq[addr];
}
if (of_property_read_bool(child, "broken-turn-around"))
mdio->phy_ignore_ta_mask |= 1 << addr;
of_property_read_u32(child, "reset-assert-us",
&phy->mdio.reset_assert_delay);
of_property_read_u32(child, "reset-deassert-us",
&phy->mdio.reset_deassert_delay);
/* Associate the OF node with the device structure so it
* can be looked up later */
of_node_get(child);
phy->mdio.dev.of_node = child;
phy->mdio.dev.fwnode = of_fwnode_handle(child);
/* All data is now stored in the phy struct;
* register it */
rc = phy_device_register(phy);
if (rc) {
phy_device_free(phy);
of_node_put(child);
return rc;
}
dev_dbg(&mdio->dev, "registered phy %pOFn at address %i\n",
child, addr);
return 0;
}
static int of_mdiobus_register_device(struct mii_bus *mdio,
struct device_node *child, u32 addr)
{
struct mdio_device *mdiodev;
int rc;
mdiodev = mdio_device_create(mdio, addr);
if (IS_ERR(mdiodev))
return PTR_ERR(mdiodev);
/* Associate the OF node with the device structure so it
* can be looked up later.
*/
of_node_get(child);
mdiodev->dev.of_node = child;
mdiodev->dev.fwnode = of_fwnode_handle(child);
/* All data is now stored in the mdiodev struct; register it. */
rc = mdio_device_register(mdiodev);
if (rc) {
mdio_device_free(mdiodev);
of_node_put(child);
return rc;
}
dev_dbg(&mdio->dev, "registered mdio device %pOFn at address %i\n",
child, addr);
return 0;
}
/* The following is a list of PHY compatible strings which appear in
* some DTBs. The compatible string is never matched against a PHY
* driver, so is pointless. We only expect devices which are not PHYs
* to have a compatible string, so they can be matched to an MDIO
* driver. Encourage users to upgrade their DT blobs to remove these.
*/
static const struct of_device_id whitelist_phys[] = {
{ .compatible = "brcm,40nm-ephy" },
{ .compatible = "broadcom,bcm5241" },
{ .compatible = "marvell,88E1111", },
{ .compatible = "marvell,88e1116", },
{ .compatible = "marvell,88e1118", },
{ .compatible = "marvell,88e1145", },
{ .compatible = "marvell,88e1149r", },
{ .compatible = "marvell,88e1310", },
{ .compatible = "marvell,88E1510", },
{ .compatible = "marvell,88E1514", },
{ .compatible = "moxa,moxart-rtl8201cp", },
{}
};
/*
* Return true if the child node is for a phy. It must either:
* o Compatible string of "ethernet-phy-idX.X"
* o Compatible string of "ethernet-phy-ieee802.3-c45"
* o Compatible string of "ethernet-phy-ieee802.3-c22"
* o In the white list above (and issue a warning)
* o No compatibility string
*
* A device which is not a phy is expected to have a compatible string
* indicating what sort of device it is.
*/
static bool of_mdiobus_child_is_phy(struct device_node *child)
{
u32 phy_id;
if (of_get_phy_id(child, &phy_id) != -EINVAL)
return true;
if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c45"))
return true;
if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c22"))
return true;
if (of_match_node(whitelist_phys, child)) {
pr_warn(FW_WARN
"%pOF: Whitelisted compatible string. Please remove\n",
child);
return true;
}
if (!of_find_property(child, "compatible", NULL))
return true;
return false;
}
/**
* of_mdiobus_register - Register mii_bus and create PHYs from the device tree
* @mdio: pointer to mii_bus structure
* @np: pointer to device_node of MDIO bus.
*
* This function registers the mii_bus structure and registers a phy_device
* for each child node of @np.
*/
int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
{
struct device_node *child;
bool scanphys = false;
int addr, rc;
if (!np)
return mdiobus_register(mdio);
/* Do not continue if the node is disabled */
if (!of_device_is_available(np))
return -ENODEV;
/* Mask out all PHYs from auto probing. Instead the PHYs listed in
* the device tree are populated after the bus has been registered */
mdio->phy_mask = ~0;
mdio->dev.of_node = np;
mdio->dev.fwnode = of_fwnode_handle(np);
/* Get bus level PHY reset GPIO details */
mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
/* Register the MDIO bus */
rc = mdiobus_register(mdio);
if (rc)
return rc;
/* Loop over the child nodes and register a phy_device for each phy */
for_each_available_child_of_node(np, child) {
addr = of_mdio_parse_addr(&mdio->dev, child);
if (addr < 0) {
scanphys = true;
continue;
}
if (of_mdiobus_child_is_phy(child))
rc = of_mdiobus_register_phy(mdio, child, addr);
else
rc = of_mdiobus_register_device(mdio, child, addr);
if (rc == -ENODEV)
dev_err(&mdio->dev,
"MDIO device at address %d is missing.\n",
addr);
else if (rc)
goto unregister;
}
if (!scanphys)
return 0;
/* auto scan for PHYs with empty reg property */
for_each_available_child_of_node(np, child) {
/* Skip PHYs with reg property set */
if (of_find_property(child, "reg", NULL))
continue;
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
/* skip already registered PHYs */
if (mdiobus_is_registered_device(mdio, addr))
continue;
/* be noisy to encourage people to set reg property */
dev_info(&mdio->dev, "scan phy %pOFn at address %i\n",
child, addr);
if (of_mdiobus_child_is_phy(child)) {
rc = of_mdiobus_register_phy(mdio, child, addr);
if (rc && rc != -ENODEV)
goto unregister;
}
}
}
return 0;
unregister:
mdiobus_unregister(mdio);
return rc;
}
EXPORT_SYMBOL(of_mdiobus_register);
/* Helper function for of_phy_find_device */
static int of_phy_match(struct device *dev, void *phy_np)
{
return dev->of_node == phy_np;
}
/**
* of_phy_find_device - Give a PHY node, find the phy_device
* @phy_np: Pointer to the phy's device tree node
*
* If successful, returns a pointer to the phy_device with the embedded
* struct device refcount incremented by one, or NULL on failure.
*/
struct phy_device *of_phy_find_device(struct device_node *phy_np)
{
struct device *d;
struct mdio_device *mdiodev;
if (!phy_np)
return NULL;
d = bus_find_device(&mdio_bus_type, NULL, phy_np, of_phy_match);
if (d) {
mdiodev = to_mdio_device(d);
if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
return to_phy_device(d);
put_device(d);
}
return NULL;
}
EXPORT_SYMBOL(of_phy_find_device);
/**
* of_phy_connect - Connect to the phy described in the device tree
* @dev: pointer to net_device claiming the phy
* @phy_np: Pointer to device tree node for the PHY
* @hndlr: Link state callback for the network device
* @flags: flags to pass to the PHY
* @iface: PHY data interface type
*
* If successful, returns a pointer to the phy_device with the embedded
* struct device refcount incremented by one, or NULL on failure. The
* refcount must be dropped by calling phy_disconnect() or phy_detach().
*/
struct phy_device *of_phy_connect(struct net_device *dev,
struct device_node *phy_np,
void (*hndlr)(struct net_device *), u32 flags,
phy_interface_t iface)
{
struct phy_device *phy = of_phy_find_device(phy_np);
int ret;
if (!phy)
return NULL;
phy->dev_flags = flags;
ret = phy_connect_direct(dev, phy, hndlr, iface);
/* refcount is held by phy_connect_direct() on success */
put_device(&phy->mdio.dev);
return ret ? NULL : phy;
}
EXPORT_SYMBOL(of_phy_connect);
/**
* of_phy_get_and_connect
* - Get phy node and connect to the phy described in the device tree
* @dev: pointer to net_device claiming the phy
* @np: Pointer to device tree node for the net_device claiming the phy
* @hndlr: Link state callback for the network device
*
* If successful, returns a pointer to the phy_device with the embedded
* struct device refcount incremented by one, or NULL on failure. The
* refcount must be dropped by calling phy_disconnect() or phy_detach().
*/
struct phy_device *of_phy_get_and_connect(struct net_device *dev,
struct device_node *np,
void (*hndlr)(struct net_device *))
{
phy_interface_t iface;
struct device_node *phy_np;
struct phy_device *phy;
int ret;
iface = of_get_phy_mode(np);
if (iface < 0)
return NULL;
if (of_phy_is_fixed_link(np)) {
ret = of_phy_register_fixed_link(np);
if (ret < 0) {
netdev_err(dev, "broken fixed-link specification\n");
return NULL;
}
phy_np = of_node_get(np);
} else {
phy_np = of_parse_phandle(np, "phy-handle", 0);
if (!phy_np)
return NULL;
}
phy = of_phy_connect(dev, phy_np, hndlr, 0, iface);
of_node_put(phy_np);
return phy;
}
EXPORT_SYMBOL(of_phy_get_and_connect);
/**
* of_phy_attach - Attach to a PHY without starting the state machine
* @dev: pointer to net_device claiming the phy
* @phy_np: Node pointer for the PHY
* @flags: flags to pass to the PHY
* @iface: PHY data interface type
*
* If successful, returns a pointer to the phy_device with the embedded
* struct device refcount incremented by one, or NULL on failure. The
* refcount must be dropped by calling phy_disconnect() or phy_detach().
*/
struct phy_device *of_phy_attach(struct net_device *dev,
struct device_node *phy_np, u32 flags,
phy_interface_t iface)
{
struct phy_device *phy = of_phy_find_device(phy_np);
int ret;
if (!phy)
return NULL;
ret = phy_attach_direct(dev, phy, flags, iface);
/* refcount is held by phy_attach_direct() on success */
put_device(&phy->mdio.dev);
return ret ? NULL : phy;
}
EXPORT_SYMBOL(of_phy_attach);
/*
* of_phy_is_fixed_link() and of_phy_register_fixed_link() must
* support two DT bindings:
* - the old DT binding, where 'fixed-link' was a property with 5
* cells encoding various informations about the fixed PHY
* - the new DT binding, where 'fixed-link' is a sub-node of the
* Ethernet device.
*/
bool of_phy_is_fixed_link(struct device_node *np)
{
struct device_node *dn;
of_mdio: add new DT property 'managed' to specify the PHY management type Currently the PHY management type is selected by the MAC driver arbitrary. The decision is based on the presence of the "fixed-link" node and on a will of the driver's authors. This caused a regression recently, when mvneta driver suddenly started to use the in-band status for auto-negotiation on fixed links. It appears the auto-negotiation may not work when expected by the MAC driver. Sebastien Rannou explains: << Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with inband status) is connected to the switch through QSGMII, and in this context we are on the media side of the PHY. >> https://lkml.org/lkml/2015/7/10/206 This patch introduces the new string property 'managed' that allows the user to set the management type explicitly. The supported values are: "auto" - default. Uses either MDIO or nothing, depending on the presence of the fixed-link node "in-band-status" - use in-band status Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> CC: Rob Herring <robh+dt@kernel.org> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Grant Likely <grant.likely@linaro.org> CC: devicetree@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 08:49:57 +08:00
int len, err;
const char *managed;
/* New binding */
dn = of_get_child_by_name(np, "fixed-link");
if (dn) {
of_node_put(dn);
return true;
}
of_mdio: add new DT property 'managed' to specify the PHY management type Currently the PHY management type is selected by the MAC driver arbitrary. The decision is based on the presence of the "fixed-link" node and on a will of the driver's authors. This caused a regression recently, when mvneta driver suddenly started to use the in-band status for auto-negotiation on fixed links. It appears the auto-negotiation may not work when expected by the MAC driver. Sebastien Rannou explains: << Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with inband status) is connected to the switch through QSGMII, and in this context we are on the media side of the PHY. >> https://lkml.org/lkml/2015/7/10/206 This patch introduces the new string property 'managed' that allows the user to set the management type explicitly. The supported values are: "auto" - default. Uses either MDIO or nothing, depending on the presence of the fixed-link node "in-band-status" - use in-band status Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> CC: Rob Herring <robh+dt@kernel.org> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Grant Likely <grant.likely@linaro.org> CC: devicetree@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 08:49:57 +08:00
err = of_property_read_string(np, "managed", &managed);
if (err == 0 && strcmp(managed, "auto") != 0)
return true;
/* Old binding */
if (of_get_property(np, "fixed-link", &len) &&
len == (5 * sizeof(__be32)))
return true;
return false;
}
EXPORT_SYMBOL(of_phy_is_fixed_link);
int of_phy_register_fixed_link(struct device_node *np)
{
struct fixed_phy_status status = {};
struct device_node *fixed_link_node;
u32 fixed_link_prop[5];
of_mdio: add new DT property 'managed' to specify the PHY management type Currently the PHY management type is selected by the MAC driver arbitrary. The decision is based on the presence of the "fixed-link" node and on a will of the driver's authors. This caused a regression recently, when mvneta driver suddenly started to use the in-band status for auto-negotiation on fixed links. It appears the auto-negotiation may not work when expected by the MAC driver. Sebastien Rannou explains: << Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with inband status) is connected to the switch through QSGMII, and in this context we are on the media side of the PHY. >> https://lkml.org/lkml/2015/7/10/206 This patch introduces the new string property 'managed' that allows the user to set the management type explicitly. The supported values are: "auto" - default. Uses either MDIO or nothing, depending on the presence of the fixed-link node "in-band-status" - use in-band status Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> CC: Rob Herring <robh+dt@kernel.org> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Grant Likely <grant.likely@linaro.org> CC: devicetree@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 08:49:57 +08:00
const char *managed;
if (of_property_read_string(np, "managed", &managed) == 0 &&
strcmp(managed, "in-band-status") == 0) {
/* status is zeroed, namely its .link member */
goto register_phy;
of_mdio: add new DT property 'managed' to specify the PHY management type Currently the PHY management type is selected by the MAC driver arbitrary. The decision is based on the presence of the "fixed-link" node and on a will of the driver's authors. This caused a regression recently, when mvneta driver suddenly started to use the in-band status for auto-negotiation on fixed links. It appears the auto-negotiation may not work when expected by the MAC driver. Sebastien Rannou explains: << Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with inband status) is connected to the switch through QSGMII, and in this context we are on the media side of the PHY. >> https://lkml.org/lkml/2015/7/10/206 This patch introduces the new string property 'managed' that allows the user to set the management type explicitly. The supported values are: "auto" - default. Uses either MDIO or nothing, depending on the presence of the fixed-link node "in-band-status" - use in-band status Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> CC: Rob Herring <robh+dt@kernel.org> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Grant Likely <grant.likely@linaro.org> CC: devicetree@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 08:49:57 +08:00
}
/* New binding */
fixed_link_node = of_get_child_by_name(np, "fixed-link");
if (fixed_link_node) {
status.link = 1;
status.duplex = of_property_read_bool(fixed_link_node,
"full-duplex");
if (of_property_read_u32(fixed_link_node, "speed",
&status.speed)) {
of_node_put(fixed_link_node);
return -EINVAL;
}
status.pause = of_property_read_bool(fixed_link_node, "pause");
status.asym_pause = of_property_read_bool(fixed_link_node,
"asym-pause");
of_node_put(fixed_link_node);
goto register_phy;
}
/* Old binding */
if (of_property_read_u32_array(np, "fixed-link", fixed_link_prop,
ARRAY_SIZE(fixed_link_prop)) == 0) {
status.link = 1;
status.duplex = fixed_link_prop[1];
status.speed = fixed_link_prop[2];
status.pause = fixed_link_prop[3];
status.asym_pause = fixed_link_prop[4];
goto register_phy;
}
return -ENODEV;
register_phy:
return PTR_ERR_OR_ZERO(fixed_phy_register(PHY_POLL, &status, np));
}
EXPORT_SYMBOL(of_phy_register_fixed_link);
void of_phy_deregister_fixed_link(struct device_node *np)
{
struct phy_device *phydev;
phydev = of_phy_find_device(np);
if (!phydev)
return;
fixed_phy_unregister(phydev);
put_device(&phydev->mdio.dev); /* of_phy_find_device() */
phy_device_free(phydev); /* fixed_phy_register() */
}
EXPORT_SYMBOL(of_phy_deregister_fixed_link);