linux_old1/include/linux/blkdev.h

903 lines
27 KiB
C
Raw Normal View History

#ifndef _LINUX_BLKDEV_H
#define _LINUX_BLKDEV_H
#include <linux/sched.h>
#include <linux/major.h>
#include <linux/genhd.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/pagemap.h>
#include <linux/backing-dev.h>
#include <linux/wait.h>
#include <linux/mempool.h>
#include <linux/bio.h>
#include <linux/module.h>
#include <linux/stringify.h>
#include <linux/bsg.h>
#include <asm/scatterlist.h>
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 02:45:40 +08:00
#ifdef CONFIG_LBD
# include <asm/div64.h>
# define sector_div(a, b) do_div(a, b)
#else
# define sector_div(n, b)( \
{ \
int _res; \
_res = (n) % (b); \
(n) /= (b); \
_res; \
} \
)
#endif
#ifdef CONFIG_BLOCK
struct scsi_ioctl_command;
struct request_queue;
typedef struct request_queue request_queue_t __deprecated;
struct elevator_queue;
typedef struct elevator_queue elevator_t;
struct request_pm_state;
struct blk_trace;
struct request;
struct sg_io_hdr;
#define BLKDEV_MIN_RQ 4
#define BLKDEV_MAX_RQ 128 /* Default maximum */
/*
* This is the per-process anticipatory I/O scheduler state.
*/
struct as_io_context {
spinlock_t lock;
void (*dtor)(struct as_io_context *aic); /* destructor */
void (*exit)(struct as_io_context *aic); /* called on task exit */
unsigned long state;
atomic_t nr_queued; /* queued reads & sync writes */
atomic_t nr_dispatched; /* number of requests gone to the drivers */
/* IO History tracking */
/* Thinktime */
unsigned long last_end_request;
unsigned long ttime_total;
unsigned long ttime_samples;
unsigned long ttime_mean;
/* Layout pattern */
unsigned int seek_samples;
sector_t last_request_pos;
u64 seek_total;
sector_t seek_mean;
};
struct cfq_queue;
struct cfq_io_context {
struct rb_node rb_node;
void *key;
struct cfq_queue *cfqq[2];
struct io_context *ioc;
unsigned long last_end_request;
sector_t last_request_pos;
unsigned long ttime_total;
unsigned long ttime_samples;
unsigned long ttime_mean;
unsigned int seek_samples;
u64 seek_total;
sector_t seek_mean;
struct list_head queue_list;
void (*dtor)(struct io_context *); /* destructor */
void (*exit)(struct io_context *); /* called on task exit */
};
/*
* This is the per-process I/O subsystem state. It is refcounted and
* kmalloc'ed. Currently all fields are modified in process io context
* (apart from the atomic refcount), so require no locking.
*/
struct io_context {
atomic_t refcount;
struct task_struct *task;
unsigned int ioprio_changed;
/*
* For request batching
*/
unsigned long last_waited; /* Time last woken after wait for request */
int nr_batch_requests; /* Number of requests left in the batch */
struct as_io_context *aic;
struct rb_root cic_root;
void *ioc_data;
};
void put_io_context(struct io_context *ioc);
void exit_io_context(void);
struct io_context *get_io_context(gfp_t gfp_flags, int node);
void copy_io_context(struct io_context **pdst, struct io_context **psrc);
void swap_io_context(struct io_context **ioc1, struct io_context **ioc2);
struct request;
typedef void (rq_end_io_fn)(struct request *, int);
struct request_list {
int count[2];
int starved[2];
int elvpriv;
mempool_t *rq_pool;
wait_queue_head_t wait[2];
};
/*
* request command types
*/
enum rq_cmd_type_bits {
REQ_TYPE_FS = 1, /* fs request */
REQ_TYPE_BLOCK_PC, /* scsi command */
REQ_TYPE_SENSE, /* sense request */
REQ_TYPE_PM_SUSPEND, /* suspend request */
REQ_TYPE_PM_RESUME, /* resume request */
REQ_TYPE_PM_SHUTDOWN, /* shutdown request */
REQ_TYPE_FLUSH, /* flush request */
REQ_TYPE_SPECIAL, /* driver defined type */
REQ_TYPE_LINUX_BLOCK, /* generic block layer message */
/*
* for ATA/ATAPI devices. this really doesn't belong here, ide should
* use REQ_TYPE_SPECIAL and use rq->cmd[0] with the range of driver
* private REQ_LB opcodes to differentiate what type of request this is
*/
REQ_TYPE_ATA_CMD,
REQ_TYPE_ATA_TASK,
REQ_TYPE_ATA_TASKFILE,
REQ_TYPE_ATA_PC,
};
/*
* For request of type REQ_TYPE_LINUX_BLOCK, rq->cmd[0] is the opcode being
* sent down (similar to how REQ_TYPE_BLOCK_PC means that ->cmd[] holds a
* SCSI cdb.
*
* 0x00 -> 0x3f are driver private, to be used for whatever purpose they need,
* typically to differentiate REQ_TYPE_SPECIAL requests.
*
*/
enum {
/*
* just examples for now
*/
REQ_LB_OP_EJECT = 0x40, /* eject request */
REQ_LB_OP_FLUSH = 0x41, /* flush device */
};
/*
* request type modified bits. first three bits match BIO_RW* bits, important
*/
enum rq_flag_bits {
__REQ_RW, /* not set, read. set, write */
__REQ_FAILFAST, /* no low level driver retries */
__REQ_SORTED, /* elevator knows about this request */
__REQ_SOFTBARRIER, /* may not be passed by ioscheduler */
__REQ_HARDBARRIER, /* may not be passed by drive either */
__REQ_FUA, /* forced unit access */
__REQ_NOMERGE, /* don't touch this for merging */
__REQ_STARTED, /* drive already may have started this one */
__REQ_DONTPREP, /* don't call prep for this one */
__REQ_QUEUED, /* uses queueing */
__REQ_ELVPRIV, /* elevator private data attached */
__REQ_FAILED, /* set if the request failed */
__REQ_QUIET, /* don't worry about errors */
__REQ_PREEMPT, /* set for "ide_preempt" requests */
__REQ_ORDERED_COLOR, /* is before or after barrier */
__REQ_RW_SYNC, /* request is sync (O_DIRECT) */
__REQ_ALLOCED, /* request came from our alloc pool */
__REQ_RW_META, /* metadata io request */
__REQ_NR_BITS, /* stops here */
};
#define REQ_RW (1 << __REQ_RW)
#define REQ_FAILFAST (1 << __REQ_FAILFAST)
#define REQ_SORTED (1 << __REQ_SORTED)
#define REQ_SOFTBARRIER (1 << __REQ_SOFTBARRIER)
#define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER)
#define REQ_FUA (1 << __REQ_FUA)
#define REQ_NOMERGE (1 << __REQ_NOMERGE)
#define REQ_STARTED (1 << __REQ_STARTED)
#define REQ_DONTPREP (1 << __REQ_DONTPREP)
#define REQ_QUEUED (1 << __REQ_QUEUED)
#define REQ_ELVPRIV (1 << __REQ_ELVPRIV)
#define REQ_FAILED (1 << __REQ_FAILED)
#define REQ_QUIET (1 << __REQ_QUIET)
#define REQ_PREEMPT (1 << __REQ_PREEMPT)
#define REQ_ORDERED_COLOR (1 << __REQ_ORDERED_COLOR)
#define REQ_RW_SYNC (1 << __REQ_RW_SYNC)
#define REQ_ALLOCED (1 << __REQ_ALLOCED)
#define REQ_RW_META (1 << __REQ_RW_META)
#define BLK_MAX_CDB 16
/*
* try to put the fields that are referenced together in the same cacheline
*/
struct request {
struct list_head queuelist;
struct list_head donelist;
struct request_queue *q;
unsigned int cmd_flags;
enum rq_cmd_type_bits cmd_type;
/* Maintain bio traversal state for part by part I/O submission.
* hard_* are block layer internals, no driver should touch them!
*/
sector_t sector; /* next sector to submit */
sector_t hard_sector; /* next sector to complete */
unsigned long nr_sectors; /* no. of sectors left to submit */
unsigned long hard_nr_sectors; /* no. of sectors left to complete */
/* no. of sectors left to submit in the current segment */
unsigned int current_nr_sectors;
/* no. of sectors left to complete in the current segment */
unsigned int hard_cur_sectors;
struct bio *bio;
struct bio *biotail;
struct hlist_node hash; /* merge hash */
/*
* The rb_node is only used inside the io scheduler, requests
* are pruned when moved to the dispatch queue. So let the
* completion_data share space with the rb_node.
*/
union {
struct rb_node rb_node; /* sort/lookup */
void *completion_data;
};
/*
* two pointers are available for the IO schedulers, if they need
* more they have to dynamically allocate it.
*/
void *elevator_private;
void *elevator_private2;
struct gendisk *rq_disk;
unsigned long start_time;
/* Number of scatter-gather DMA addr+len pairs after
* physical address coalescing is performed.
*/
unsigned short nr_phys_segments;
/* Number of scatter-gather addr+len pairs after
* physical and DMA remapping hardware coalescing is performed.
* This is the number of scatter-gather entries the driver
* will actually have to deal with after DMA mapping is done.
*/
unsigned short nr_hw_segments;
unsigned short ioprio;
void *special;
char *buffer;
int tag;
int errors;
int ref_count;
/*
* when request is used as a packet command carrier
*/
unsigned int cmd_len;
unsigned char cmd[BLK_MAX_CDB];
unsigned int data_len;
unsigned int sense_len;
void *data;
void *sense;
unsigned int timeout;
int retries;
/*
* completion callback.
*/
rq_end_io_fn *end_io;
void *end_io_data;
/* for bidi */
struct request *next_rq;
};
/*
* State information carried for REQ_TYPE_PM_SUSPEND and REQ_TYPE_PM_RESUME
* requests. Some step values could eventually be made generic.
*/
struct request_pm_state
{
/* PM state machine step value, currently driver specific */
int pm_step;
/* requested PM state value (S1, S2, S3, S4, ...) */
u32 pm_state;
void* data; /* for driver use */
};
#include <linux/elevator.h>
typedef void (request_fn_proc) (struct request_queue *q);
typedef int (make_request_fn) (struct request_queue *q, struct bio *bio);
typedef int (prep_rq_fn) (struct request_queue *, struct request *);
typedef void (unplug_fn) (struct request_queue *);
struct bio_vec;
typedef int (merge_bvec_fn) (struct request_queue *, struct bio *, struct bio_vec *);
typedef int (issue_flush_fn) (struct request_queue *, struct gendisk *, sector_t *);
typedef void (prepare_flush_fn) (struct request_queue *, struct request *);
typedef void (softirq_done_fn)(struct request *);
enum blk_queue_state {
Queue_down,
Queue_up,
};
struct blk_queue_tag {
struct request **tag_index; /* map of busy tags */
unsigned long *tag_map; /* bit map of free/busy tags */
struct list_head busy_list; /* fifo list of busy tags */
int busy; /* current depth */
int max_depth; /* what we will send to device */
[PATCH] blk: fix tag shrinking (revive real_max_size) My patch in commit fa72b903f75e4f0f0b2c2feed093005167da4023 incorrectly removed blk_queue_tag->real_max_depth. The original resize implementation was incorrect in the following points. * actual allocation size of tag_index was shorter than real_max_size, but assumed to be of the same size, possibly causing memory access beyond the allocated area. * bits in tag_map between max_deptn and real_max_depth were initialized to 1's, making the tags permanently reserved. In an attempt to fix above two bugs, I had removed allocation optimization in init_tag_map and real_max_size. Tag map/index were allocated and freed immediately during resize. Unfortunately, I wasn't considering that tag map/index can be resized dynamically with tags beyond new_depth active. This led to accessing freed area after shrinking tags and led to the following bug reporting thread on linux-scsi. http://marc.theaimsgroup.com/?l=linux-scsi&m=112319898111885&w=2 To fix the problem, I've revived real_max_depth without allocation optimization in init_tag_map, and Andrew Vasquez confirmed that the problem was fixed. As Jens is not going to be available for a week, he asked me to make sure that this patch reaches you. http://marc.theaimsgroup.com/?l=linux-scsi&m=112325778530886&w=2 Also, a comment was added to make sure that real_max_size is needed for dynamic shrinking. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-06 04:28:11 +08:00
int real_max_depth; /* what the array can hold */
atomic_t refcnt; /* map can be shared */
};
struct request_queue
{
/*
* Together with queue_head for cacheline sharing
*/
struct list_head queue_head;
struct request *last_merge;
elevator_t *elevator;
/*
* the queue request freelist, one for reads and one for writes
*/
struct request_list rq;
request_fn_proc *request_fn;
make_request_fn *make_request_fn;
prep_rq_fn *prep_rq_fn;
unplug_fn *unplug_fn;
merge_bvec_fn *merge_bvec_fn;
issue_flush_fn *issue_flush_fn;
prepare_flush_fn *prepare_flush_fn;
softirq_done_fn *softirq_done_fn;
/*
* Dispatch queue sorting
*/
sector_t end_sector;
struct request *boundary_rq;
/*
* Auto-unplugging state
*/
struct timer_list unplug_timer;
int unplug_thresh; /* After this many requests */
unsigned long unplug_delay; /* After this many jiffies */
struct work_struct unplug_work;
struct backing_dev_info backing_dev_info;
/*
* The queue owner gets to use this for whatever they like.
* ll_rw_blk doesn't touch it.
*/
void *queuedata;
/*
* queue needs bounce pages for pages above this limit
*/
unsigned long bounce_pfn;
gfp_t bounce_gfp;
/*
* various queue flags, see QUEUE_* below
*/
unsigned long queue_flags;
/*
* protects queue structures from reentrancy. ->__queue_lock should
* _never_ be used directly, it is queue private. always use
* ->queue_lock.
*/
spinlock_t __queue_lock;
spinlock_t *queue_lock;
/*
* queue kobject
*/
struct kobject kobj;
/*
* queue settings
*/
unsigned long nr_requests; /* Max # of requests */
unsigned int nr_congestion_on;
unsigned int nr_congestion_off;
unsigned int nr_batching;
unsigned int max_sectors;
unsigned int max_hw_sectors;
unsigned short max_phys_segments;
unsigned short max_hw_segments;
unsigned short hardsect_size;
unsigned int max_segment_size;
unsigned long seg_boundary_mask;
unsigned int dma_alignment;
struct blk_queue_tag *queue_tags;
unsigned int nr_sorted;
unsigned int in_flight;
/*
* sg stuff
*/
unsigned int sg_timeout;
unsigned int sg_reserved_size;
int node;
#ifdef CONFIG_BLK_DEV_IO_TRACE
struct blk_trace *blk_trace;
#endif
/*
* reserved for flush operations
*/
unsigned int ordered, next_ordered, ordseq;
int orderr, ordcolor;
struct request pre_flush_rq, bar_rq, post_flush_rq;
struct request *orig_bar_rq;
unsigned int bi_size;
struct mutex sysfs_lock;
#if defined(CONFIG_BLK_DEV_BSG)
struct bsg_class_device bsg_dev;
#endif
};
#define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */
#define QUEUE_FLAG_QUEUED 1 /* uses generic tag queueing */
#define QUEUE_FLAG_STOPPED 2 /* queue is stopped */
#define QUEUE_FLAG_READFULL 3 /* read queue has been filled */
#define QUEUE_FLAG_WRITEFULL 4 /* write queue has been filled */
#define QUEUE_FLAG_DEAD 5 /* queue being torn down */
#define QUEUE_FLAG_REENTER 6 /* Re-entrancy avoidance */
#define QUEUE_FLAG_PLUGGED 7 /* queue is plugged */
#define QUEUE_FLAG_ELVSWITCH 8 /* don't use elevator, just do FIFO */
#define QUEUE_FLAG_BIDI 9 /* queue supports bidi requests */
enum {
/*
* Hardbarrier is supported with one of the following methods.
*
* NONE : hardbarrier unsupported
* DRAIN : ordering by draining is enough
* DRAIN_FLUSH : ordering by draining w/ pre and post flushes
* DRAIN_FUA : ordering by draining w/ pre flush and FUA write
* TAG : ordering by tag is enough
* TAG_FLUSH : ordering by tag w/ pre and post flushes
* TAG_FUA : ordering by tag w/ pre flush and FUA write
*/
QUEUE_ORDERED_NONE = 0x00,
QUEUE_ORDERED_DRAIN = 0x01,
QUEUE_ORDERED_TAG = 0x02,
QUEUE_ORDERED_PREFLUSH = 0x10,
QUEUE_ORDERED_POSTFLUSH = 0x20,
QUEUE_ORDERED_FUA = 0x40,
QUEUE_ORDERED_DRAIN_FLUSH = QUEUE_ORDERED_DRAIN |
QUEUE_ORDERED_PREFLUSH | QUEUE_ORDERED_POSTFLUSH,
QUEUE_ORDERED_DRAIN_FUA = QUEUE_ORDERED_DRAIN |
QUEUE_ORDERED_PREFLUSH | QUEUE_ORDERED_FUA,
QUEUE_ORDERED_TAG_FLUSH = QUEUE_ORDERED_TAG |
QUEUE_ORDERED_PREFLUSH | QUEUE_ORDERED_POSTFLUSH,
QUEUE_ORDERED_TAG_FUA = QUEUE_ORDERED_TAG |
QUEUE_ORDERED_PREFLUSH | QUEUE_ORDERED_FUA,
/*
* Ordered operation sequence
*/
QUEUE_ORDSEQ_STARTED = 0x01, /* flushing in progress */
QUEUE_ORDSEQ_DRAIN = 0x02, /* waiting for the queue to be drained */
QUEUE_ORDSEQ_PREFLUSH = 0x04, /* pre-flushing in progress */
QUEUE_ORDSEQ_BAR = 0x08, /* original barrier req in progress */
QUEUE_ORDSEQ_POSTFLUSH = 0x10, /* post-flushing in progress */
QUEUE_ORDSEQ_DONE = 0x20,
};
#define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags)
#define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags)
#define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
#define blk_queue_flushing(q) ((q)->ordseq)
#define blk_fs_request(rq) ((rq)->cmd_type == REQ_TYPE_FS)
#define blk_pc_request(rq) ((rq)->cmd_type == REQ_TYPE_BLOCK_PC)
#define blk_special_request(rq) ((rq)->cmd_type == REQ_TYPE_SPECIAL)
#define blk_sense_request(rq) ((rq)->cmd_type == REQ_TYPE_SENSE)
#define blk_noretry_request(rq) ((rq)->cmd_flags & REQ_FAILFAST)
#define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED)
#define blk_account_rq(rq) (blk_rq_started(rq) && blk_fs_request(rq))
#define blk_pm_suspend_request(rq) ((rq)->cmd_type == REQ_TYPE_PM_SUSPEND)
#define blk_pm_resume_request(rq) ((rq)->cmd_type == REQ_TYPE_PM_RESUME)
#define blk_pm_request(rq) \
(blk_pm_suspend_request(rq) || blk_pm_resume_request(rq))
#define blk_sorted_rq(rq) ((rq)->cmd_flags & REQ_SORTED)
#define blk_barrier_rq(rq) ((rq)->cmd_flags & REQ_HARDBARRIER)
#define blk_fua_rq(rq) ((rq)->cmd_flags & REQ_FUA)
#define blk_bidi_rq(rq) ((rq)->next_rq != NULL)
#define list_entry_rq(ptr) list_entry((ptr), struct request, queuelist)
#define rq_data_dir(rq) ((rq)->cmd_flags & 1)
/*
* We regard a request as sync, if it's a READ or a SYNC write.
*/
#define rq_is_sync(rq) (rq_data_dir((rq)) == READ || (rq)->cmd_flags & REQ_RW_SYNC)
#define rq_is_meta(rq) ((rq)->cmd_flags & REQ_RW_META)
static inline int blk_queue_full(struct request_queue *q, int rw)
{
if (rw == READ)
return test_bit(QUEUE_FLAG_READFULL, &q->queue_flags);
return test_bit(QUEUE_FLAG_WRITEFULL, &q->queue_flags);
}
static inline void blk_set_queue_full(struct request_queue *q, int rw)
{
if (rw == READ)
set_bit(QUEUE_FLAG_READFULL, &q->queue_flags);
else
set_bit(QUEUE_FLAG_WRITEFULL, &q->queue_flags);
}
static inline void blk_clear_queue_full(struct request_queue *q, int rw)
{
if (rw == READ)
clear_bit(QUEUE_FLAG_READFULL, &q->queue_flags);
else
clear_bit(QUEUE_FLAG_WRITEFULL, &q->queue_flags);
}
/*
* mergeable request must not have _NOMERGE or _BARRIER bit set, nor may
* it already be started by driver.
*/
#define RQ_NOMERGE_FLAGS \
(REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER)
#define rq_mergeable(rq) \
(!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && blk_fs_request((rq)))
/*
* q->prep_rq_fn return values
*/
#define BLKPREP_OK 0 /* serve it */
#define BLKPREP_KILL 1 /* fatal error, kill */
#define BLKPREP_DEFER 2 /* leave on queue */
extern unsigned long blk_max_low_pfn, blk_max_pfn;
/*
* standard bounce addresses:
*
* BLK_BOUNCE_HIGH : bounce all highmem pages
* BLK_BOUNCE_ANY : don't bounce anything
* BLK_BOUNCE_ISA : bounce pages above ISA DMA boundary
*/
#define BLK_BOUNCE_HIGH ((u64)blk_max_low_pfn << PAGE_SHIFT)
#define BLK_BOUNCE_ANY ((u64)blk_max_pfn << PAGE_SHIFT)
#define BLK_BOUNCE_ISA (ISA_DMA_THRESHOLD)
/*
* default timeout for SG_IO if none specified
*/
#define BLK_DEFAULT_SG_TIMEOUT (60 * HZ)
#ifdef CONFIG_BOUNCE
extern int init_emergency_isa_pool(void);
extern void blk_queue_bounce(struct request_queue *q, struct bio **bio);
#else
static inline int init_emergency_isa_pool(void)
{
return 0;
}
static inline void blk_queue_bounce(struct request_queue *q, struct bio **bio)
{
}
#endif /* CONFIG_MMU */
#define rq_for_each_bio(_bio, rq) \
if ((rq->bio)) \
for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next)
extern int blk_register_queue(struct gendisk *disk);
extern void blk_unregister_queue(struct gendisk *disk);
extern void register_disk(struct gendisk *dev);
extern void generic_make_request(struct bio *bio);
extern void blk_put_request(struct request *);
extern void __blk_put_request(struct request_queue *, struct request *);
extern void blk_end_sync_rq(struct request *rq, int error);
extern struct request *blk_get_request(struct request_queue *, int, gfp_t);
extern void blk_insert_request(struct request_queue *, struct request *, int, void *);
extern void blk_requeue_request(struct request_queue *, struct request *);
extern void blk_plug_device(struct request_queue *);
extern int blk_remove_plug(struct request_queue *);
extern void blk_recount_segments(struct request_queue *, struct bio *);
extern int scsi_cmd_ioctl(struct file *, struct request_queue *,
struct gendisk *, unsigned int, void __user *);
extern int sg_scsi_ioctl(struct file *, struct request_queue *,
struct gendisk *, struct scsi_ioctl_command __user *);
/*
* Temporary export, until SCSI gets fixed up.
*/
extern int ll_back_merge_fn(struct request_queue *, struct request *,
struct bio *);
/*
* A queue has just exitted congestion. Note this in the global counter of
* congested queues, and wake up anyone who was waiting for requests to be
* put back.
*/
static inline void blk_clear_queue_congested(struct request_queue *q, int rw)
{
clear_bdi_congested(&q->backing_dev_info, rw);
}
/*
* A queue has just entered congestion. Flag that in the queue's VM-visible
* state flags and increment the global gounter of congested queues.
*/
static inline void blk_set_queue_congested(struct request_queue *q, int rw)
{
set_bdi_congested(&q->backing_dev_info, rw);
}
extern void blk_start_queue(struct request_queue *q);
extern void blk_stop_queue(struct request_queue *q);
extern void blk_sync_queue(struct request_queue *q);
extern void __blk_stop_queue(struct request_queue *q);
extern void blk_run_queue(struct request_queue *);
extern void blk_start_queueing(struct request_queue *);
extern int blk_rq_map_user(struct request_queue *, struct request *, void __user *, unsigned long);
extern int blk_rq_unmap_user(struct bio *);
extern int blk_rq_map_kern(struct request_queue *, struct request *, void *, unsigned int, gfp_t);
extern int blk_rq_map_user_iov(struct request_queue *, struct request *,
struct sg_iovec *, int, unsigned int);
extern int blk_execute_rq(struct request_queue *, struct gendisk *,
struct request *, int);
extern void blk_execute_rq_nowait(struct request_queue *, struct gendisk *,
struct request *, int, rq_end_io_fn *);
extern int blk_verify_command(unsigned char *, int);
static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
{
return bdev->bd_disk->queue;
}
static inline void blk_run_backing_dev(struct backing_dev_info *bdi,
struct page *page)
{
if (bdi && bdi->unplug_io_fn)
bdi->unplug_io_fn(bdi, page);
}
static inline void blk_run_address_space(struct address_space *mapping)
{
if (mapping)
blk_run_backing_dev(mapping->backing_dev_info, NULL);
}
/*
* end_request() and friends. Must be called with the request queue spinlock
* acquired. All functions called within end_request() _must_be_ atomic.
*
* Several drivers define their own end_request and call
* end_that_request_first() and end_that_request_last()
* for parts of the original function. This prevents
* code duplication in drivers.
*/
extern int end_that_request_first(struct request *, int, int);
extern int end_that_request_chunk(struct request *, int, int);
extern void end_that_request_last(struct request *, int);
extern void end_request(struct request *req, int uptodate);
extern void blk_complete_request(struct request *);
/*
* end_that_request_first/chunk() takes an uptodate argument. we account
* any value <= as an io error. 0 means -EIO for compatability reasons,
* any other < 0 value is the direct error type. An uptodate value of
* 1 indicates successful io completion
*/
#define end_io_error(uptodate) (unlikely((uptodate) <= 0))
static inline void blkdev_dequeue_request(struct request *req)
{
elv_dequeue_request(req->q, req);
}
/*
* Access functions for manipulating queue properties
*/
extern struct request_queue *blk_init_queue_node(request_fn_proc *rfn,
spinlock_t *lock, int node_id);
extern struct request_queue *blk_init_queue(request_fn_proc *, spinlock_t *);
extern void blk_cleanup_queue(struct request_queue *);
extern void blk_queue_make_request(struct request_queue *, make_request_fn *);
extern void blk_queue_bounce_limit(struct request_queue *, u64);
extern void blk_queue_max_sectors(struct request_queue *, unsigned int);
extern void blk_queue_max_phys_segments(struct request_queue *, unsigned short);
extern void blk_queue_max_hw_segments(struct request_queue *, unsigned short);
extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
extern void blk_queue_hardsect_size(struct request_queue *, unsigned short);
extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
extern void blk_queue_segment_boundary(struct request_queue *, unsigned long);
extern void blk_queue_prep_rq(struct request_queue *, prep_rq_fn *pfn);
extern void blk_queue_merge_bvec(struct request_queue *, merge_bvec_fn *);
extern void blk_queue_dma_alignment(struct request_queue *, int);
extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *);
extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
extern int blk_queue_ordered(struct request_queue *, unsigned, prepare_flush_fn *);
extern void blk_queue_issue_flush_fn(struct request_queue *, issue_flush_fn *);
extern int blk_do_ordered(struct request_queue *, struct request **);
extern unsigned blk_ordered_cur_seq(struct request_queue *);
extern unsigned blk_ordered_req_seq(struct request *);
extern void blk_ordered_complete_seq(struct request_queue *, unsigned, int);
extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *);
extern void blk_dump_rq_flags(struct request *, char *);
extern void generic_unplug_device(struct request_queue *);
extern void __generic_unplug_device(struct request_queue *);
extern long nr_blockdev_pages(void);
int blk_get_queue(struct request_queue *);
struct request_queue *blk_alloc_queue(gfp_t);
struct request_queue *blk_alloc_queue_node(gfp_t, int);
extern void blk_put_queue(struct request_queue *);
/*
* tag stuff
*/
#define blk_queue_tag_depth(q) ((q)->queue_tags->busy)
#define blk_queue_tag_queue(q) ((q)->queue_tags->busy < (q)->queue_tags->max_depth)
#define blk_rq_tagged(rq) ((rq)->cmd_flags & REQ_QUEUED)
extern int blk_queue_start_tag(struct request_queue *, struct request *);
extern struct request *blk_queue_find_tag(struct request_queue *, int);
extern void blk_queue_end_tag(struct request_queue *, struct request *);
extern int blk_queue_init_tags(struct request_queue *, int, struct blk_queue_tag *);
extern void blk_queue_free_tags(struct request_queue *);
extern int blk_queue_resize_tags(struct request_queue *, int);
extern void blk_queue_invalidate_tags(struct request_queue *);
extern struct blk_queue_tag *blk_init_tags(int);
extern void blk_free_tags(struct blk_queue_tag *);
static inline struct request *blk_map_queue_find_tag(struct blk_queue_tag *bqt,
int tag)
{
if (unlikely(bqt == NULL || tag >= bqt->real_max_depth))
return NULL;
return bqt->tag_index[tag];
}
extern void blk_rq_bio_prep(struct request_queue *, struct request *, struct bio *);
extern int blkdev_issue_flush(struct block_device *, sector_t *);
#define MAX_PHYS_SEGMENTS 128
#define MAX_HW_SEGMENTS 128
#define SAFE_MAX_SECTORS 255
#define BLK_DEF_MAX_SECTORS 1024
#define MAX_SEGMENT_SIZE 65536
#define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist)
static inline int queue_hardsect_size(struct request_queue *q)
{
int retval = 512;
if (q && q->hardsect_size)
retval = q->hardsect_size;
return retval;
}
static inline int bdev_hardsect_size(struct block_device *bdev)
{
return queue_hardsect_size(bdev_get_queue(bdev));
}
static inline int queue_dma_alignment(struct request_queue *q)
{
int retval = 511;
if (q && q->dma_alignment)
retval = q->dma_alignment;
return retval;
}
/* assumes size > 256 */
static inline unsigned int blksize_bits(unsigned int size)
{
unsigned int bits = 8;
do {
bits++;
size >>= 1;
} while (size > 256);
return bits;
}
static inline unsigned int block_size(struct block_device *bdev)
{
return bdev->bd_block_size;
}
typedef struct {struct page *v;} Sector;
unsigned char *read_dev_sector(struct block_device *, sector_t, Sector *);
static inline void put_dev_sector(Sector p)
{
page_cache_release(p.v);
}
struct work_struct;
int kblockd_schedule_work(struct work_struct *work);
void kblockd_flush_work(struct work_struct *work);
#define MODULE_ALIAS_BLOCKDEV(major,minor) \
MODULE_ALIAS("block-major-" __stringify(major) "-" __stringify(minor))
#define MODULE_ALIAS_BLOCKDEV_MAJOR(major) \
MODULE_ALIAS("block-major-" __stringify(major) "-*")
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 02:45:40 +08:00
#else /* CONFIG_BLOCK */
/*
* stubs for when the block layer is configured out
*/
#define buffer_heads_over_limit 0
static inline long nr_blockdev_pages(void)
{
return 0;
}
static inline void exit_io_context(void)
{
}
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 02:45:40 +08:00
#endif /* CONFIG_BLOCK */
#endif