p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/arch/arm/boot/dts/tegra20-whistler.dts

597 lines
13 KiB
Plaintext
Raw Normal View History

ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
/dts-v1/;
/include/ "tegra20.dtsi"
/ {
model = "NVIDIA Tegra2 Whistler evaluation board";
compatible = "nvidia,whistler", "nvidia,tegra20";
memory {
reg = <0x00000000 0x20000000>;
};
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ata {
nvidia,pins = "ata", "atb", "ate", "gma", "gmb",
"gmc", "gmd", "gpu";
nvidia,function = "gmi";
};
atc {
nvidia,pins = "atc", "atd";
nvidia,function = "sdio4";
};
cdev1 {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
};
cdev2 {
nvidia,pins = "cdev2";
nvidia,function = "osc";
};
crtp {
nvidia,pins = "crtp";
nvidia,function = "crt";
};
csus {
nvidia,pins = "csus";
nvidia,function = "vi_sensor_clk";
};
dap1 {
nvidia,pins = "dap1";
nvidia,function = "dap1";
};
dap2 {
nvidia,pins = "dap2";
nvidia,function = "dap2";
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
};
dap4 {
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
};
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd";
nvidia,function = "vi";
};
dte {
nvidia,pins = "dte";
nvidia,function = "rsvd1";
};
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
};
gme {
nvidia,pins = "gme";
nvidia,function = "dap5";
};
gpu7 {
nvidia,pins = "gpu7";
nvidia,function = "rtck";
};
gpv {
nvidia,pins = "gpv";
nvidia,function = "pcie";
};
hdint {
nvidia,pins = "hdint", "pta";
nvidia,function = "hdmi";
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
};
irrx {
nvidia,pins = "irrx", "irtx";
nvidia,function = "uartb";
};
kbca {
nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
nvidia,function = "kbc";
};
kbcb {
nvidia,pins = "kbcb", "kbcd";
nvidia,function = "sdio2";
};
lcsn {
nvidia,pins = "lcsn", "lsck", "lsda", "lsdi",
"spia", "spib", "spic";
nvidia,function = "spi3";
};
ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
"ld5", "ld6", "ld7", "ld8", "ld9",
"ld10", "ld11", "ld12", "ld13", "ld14",
"ld15", "ld16", "ld17", "ldc", "ldi",
"lhp0", "lhp1", "lhp2", "lhs", "lm0",
"lm1", "lpp", "lpw0", "lpw1", "lpw2",
"lsc0", "lsc1", "lspi", "lvp0", "lvp1",
"lvs";
nvidia,function = "displaya";
};
owc {
nvidia,pins = "owc", "uac";
nvidia,function = "owr";
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
};
sdb {
nvidia,pins = "sdb", "sdc", "sdd", "slxa",
"slxc", "slxd", "slxk";
nvidia,function = "sdio3";
};
sdio1 {
nvidia,pins = "sdio1";
nvidia,function = "sdio1";
};
spdi {
nvidia,pins = "spdi", "spdo";
nvidia,function = "rsvd2";
};
spid {
nvidia,pins = "spid", "spie", "spig", "spih";
nvidia,function = "spi2_alt";
};
spif {
nvidia,pins = "spif";
nvidia,function = "spi2";
};
uaa {
nvidia,pins = "uaa", "uab";
nvidia,function = "uarta";
};
uad {
nvidia,pins = "uad";
nvidia,function = "irda";
};
uca {
nvidia,pins = "uca", "ucb";
nvidia,function = "uartc";
};
uda {
nvidia,pins = "uda";
nvidia,function = "spi1";
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "ddc", "gma",
"gmb", "gmc", "gmd", "irrx", "irtx",
"kbca", "kbcb", "kbcc", "kbcd", "kbce",
"kbcf", "sdc", "sdd", "spie", "spig",
"spih", "uaa", "uab", "uad", "uca",
"ucb";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
conf_atd {
nvidia,pins = "atd", "ate", "cdev1", "csus",
"dap1", "dap2", "dap3", "dap4", "dte",
"dtf", "gpu", "gpu7", "gpv", "i2cp",
"rm", "sdio1", "slxa", "slxc", "slxd",
"slxk", "spdi", "spdo", "uac", "uda";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
conf_cdev2 {
nvidia,pins = "cdev2", "spia", "spib";
nvidia,pull = <1>;
nvidia,tristate = <1>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "lc", "pmca",
"pmcb", "pmcc", "pmcd", "xm2c",
"xm2d";
nvidia,pull = <0>;
};
conf_crtp {
nvidia,pins = "crtp";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
conf_dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd",
"spid", "spif";
nvidia,pull = <1>;
nvidia,tristate = <0>;
};
conf_gme {
nvidia,pins = "gme", "owc", "pta", "spic";
nvidia,pull = <2>;
nvidia,tristate = <1>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
nvidia,pull = <1>;
};
conf_ls {
nvidia,pins = "ls", "pmce";
nvidia,pull = <2>;
};
drive_dap1 {
nvidia,pins = "drive_dap1";
nvidia,high-speed-mode = <0>;
nvidia,schmitt = <1>;
nvidia,low-power-mode = <0>;
nvidia,pull-down-strength = <0>;
nvidia,pull-up-strength = <0>;
nvidia,slew-rate-rising = <0>;
nvidia,slew-rate-falling = <0>;
};
};
};
i2s@70002800 {
status = "okay";
};
serial@70006000 {
status = "okay";
clock-frequency = <216000000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
codec: codec@1a {
compatible = "wlf,wm8753";
reg = <0x1a>;
};
tca6416: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
max8907@3c {
compatible = "maxim,max8907";
reg = <0x3c>;
interrupts = <0 86 0x4>;
ARM: dt: tegra: whistler: configure power off Add DT property to tell the MAX8907 that it should provide the pm_power_off() implementation. This allows "shutdown" to work. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-12 03:13:05 +08:00
maxim,system-power-controller;
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
mbatt-supply = <&usb0_vbus_reg>;
in-v1-supply = <&mbatt_reg>;
in-v2-supply = <&mbatt_reg>;
in-v3-supply = <&mbatt_reg>;
in1-supply = <&mbatt_reg>;
in2-supply = <&nvvdd_sv3_reg>;
in3-supply = <&mbatt_reg>;
in4-supply = <&mbatt_reg>;
in5-supply = <&mbatt_reg>;
in6-supply = <&mbatt_reg>;
in7-supply = <&mbatt_reg>;
in8-supply = <&mbatt_reg>;
in9-supply = <&mbatt_reg>;
in10-supply = <&mbatt_reg>;
in11-supply = <&mbatt_reg>;
in12-supply = <&mbatt_reg>;
in13-supply = <&mbatt_reg>;
in14-supply = <&mbatt_reg>;
in15-supply = <&mbatt_reg>;
in16-supply = <&mbatt_reg>;
in17-supply = <&nvvdd_sv3_reg>;
in18-supply = <&nvvdd_sv3_reg>;
in19-supply = <&mbatt_reg>;
in20-supply = <&mbatt_reg>;
regulators {
#address-cells = <1>;
#size-cells = <0>;
mbatt_reg: regulator@0 {
reg = <0>;
regulator-compatible = "mbatt";
regulator-name = "vbat_pmu";
regulator-always-on;
};
regulator@1 {
reg = <1>;
regulator-compatible = "sd1";
regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
regulator@2 {
reg = <2>;
regulator-compatible = "sd2";
regulator-name = "nvvdd_sv2,vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
nvvdd_sv3_reg: regulator@3 {
reg = <3>;
regulator-compatible = "sd3";
regulator-name = "nvvdd_sv3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
regulator@4 {
reg = <4>;
regulator-compatible = "ldo1";
regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
regulator@5 {
reg = <5>;
regulator-compatible = "ldo2";
regulator-name = "nvvdd_ldo2,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
regulator@6 {
reg = <6>;
regulator-compatible = "ldo3";
regulator-name = "nvvdd_ldo3,vcom_1v8b";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
regulator@7 {
reg = <7>;
regulator-compatible = "ldo4";
regulator-name = "nvvdd_ldo4,avdd_usb*";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
regulator@8 {
reg = <8>;
regulator-compatible = "ldo5";
regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
regulator@9 {
reg = <9>;
regulator-compatible = "ldo6";
regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
regulator@10 {
reg = <10>;
regulator-compatible = "ldo7";
regulator-name = "nvvdd_ldo7,avddio_audio";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
regulator@11 {
reg = <11>;
regulator-compatible = "ldo8";
regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
regulator@12 {
reg = <12>;
regulator-compatible = "ldo9";
regulator-name = "nvvdd_ldo9,avdd_cam*";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
regulator@13 {
reg = <13>;
regulator-compatible = "ldo10";
regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
regulator@14 {
reg = <14>;
regulator-compatible = "ldo11";
regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
regulator@15 {
reg = <15>;
regulator-compatible = "ldo12";
regulator-name = "nvvdd_ldo12,vddio_sdio";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
regulator@16 {
reg = <16>;
regulator-compatible = "ldo13";
regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
regulator@17 {
reg = <17>;
regulator-compatible = "ldo14";
regulator-name = "nvvdd_ldo14,avdd_vdac";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
regulator@18 {
reg = <18>;
regulator-compatible = "ldo15";
regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
regulator@19 {
reg = <19>;
regulator-compatible = "ldo16";
regulator-name = "nvvdd_ldo16,vdd_dbrtr";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
};
regulator@20 {
reg = <20>;
regulator-compatible = "ldo17";
regulator-name = "nvvdd_ldo17,vddio_mipi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
regulator@21 {
reg = <21>;
regulator-compatible = "ldo18";
regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
regulator@22 {
reg = <22>;
regulator-compatible = "ldo19";
regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
regulator@23 {
reg = <23>;
regulator-compatible = "ldo20";
regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
regulator@24 {
reg = <24>;
regulator-compatible = "out5v";
regulator-name = "usb0_vbus_reg";
};
regulator@25 {
reg = <25>;
regulator-compatible = "out33v";
regulator-name = "pmu_out3v3";
};
regulator@26 {
reg = <26>;
regulator-compatible = "bbat";
regulator-name = "pmu_bbat";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <2400000>;
regulator-always-on;
};
regulator@27 {
reg = <27>;
regulator-compatible = "sdby";
regulator-name = "vdd_aon";
regulator-always-on;
};
regulator@28 {
reg = <28>;
regulator-compatible = "vrtc";
regulator-name = "vrtc,pmu_vccadc";
regulator-always-on;
};
};
};
};
pmc {
nvidia,invert-interrupt;
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
};
usb@c5000000 {
status = "okay";
nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
};
usb@c5008000 {
status = "okay";
nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
};
sdhci@c8000400 {
status = "okay";
wp-gpios = <&gpio 173 0>; /* gpio PV5 */
bus-width = <8>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
};
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
usb0_vbus_reg: regulator {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
sound {
compatible = "nvidia,tegra-audio-wm8753-whistler",
"nvidia,tegra-audio-wm8753";
nvidia,model = "NVIDIA Tegra Whistler";
nvidia,audio-routing =
"Headphone Jack", "LOUT1",
"Headphone Jack", "ROUT1",
"MIC2", "Mic Jack",
"MIC2N", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&codec>;
};
};