p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/block/swim3.c

1290 lines
32 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Driver for the SWIM3 (Super Woz Integrated Machine 3)
* floppy controller found on Power Macintoshes.
*
* Copyright (C) 1996 Paul Mackerras.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/*
* TODO:
* handle 2 drives
* handle GCR disks
*/
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
#undef DEBUG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/fd.h>
#include <linux/ioctl.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 20:28:52 +08:00
#include <linux/mutex.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/module.h>
powermac: Use a spinlock in swim3.c (floppy driver) instead of cli Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 09:15:36 +08:00
#include <linux/spinlock.h>
swim3: fix interruptible_sleep_on race interruptible_sleep_on is racy and going away. This replaces the one caller in the swim3 driver with the equivalent race-free wait_event_interruptible call. Since we're here already, this also fixes the case where we get interrupted from atomic context, which used to just spin in the loop. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-26 19:01:44 +08:00
#include <linux/wait.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/io.h>
#include <asm/dbdma.h>
#include <asm/prom.h>
#include <asm/uaccess.h>
#include <asm/mediabay.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#define MAX_FLOPPIES 2
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
static DEFINE_MUTEX(swim3_mutex);
static struct gendisk *disks[MAX_FLOPPIES];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
enum swim_state {
idle,
locating,
seeking,
settling,
do_transfer,
jogging,
available,
revalidating,
ejecting
};
#define REG(x) unsigned char x; char x ## _pad[15];
/*
* The names for these registers mostly represent speculation on my part.
* It will be interesting to see how close they are to the names Apple uses.
*/
struct swim3 {
REG(data);
REG(timer); /* counts down at 1MHz */
REG(error);
REG(mode);
REG(select); /* controls CA0, CA1, CA2 and LSTRB signals */
REG(setup);
REG(control); /* writing bits clears them */
REG(status); /* writing bits sets them in control */
REG(intr);
REG(nseek); /* # tracks to seek */
REG(ctrack); /* current track number */
REG(csect); /* current sector number */
REG(gap3); /* size of gap 3 in track format */
REG(sector); /* sector # to read or write */
REG(nsect); /* # sectors to read or write */
REG(intr_enable);
};
#define control_bic control
#define control_bis status
/* Bits in select register */
#define CA_MASK 7
#define LSTRB 8
/* Bits in control register */
#define DO_SEEK 0x80
#define FORMAT 0x40
#define SELECT 0x20
#define WRITE_SECTORS 0x10
#define DO_ACTION 0x08
#define DRIVE2_ENABLE 0x04
#define DRIVE_ENABLE 0x02
#define INTR_ENABLE 0x01
/* Bits in status register */
#define FIFO_1BYTE 0x80
#define FIFO_2BYTE 0x40
#define ERROR 0x20
#define DATA 0x08
#define RDDATA 0x04
#define INTR_PENDING 0x02
#define MARK_BYTE 0x01
/* Bits in intr and intr_enable registers */
#define ERROR_INTR 0x20
#define DATA_CHANGED 0x10
#define TRANSFER_DONE 0x08
#define SEEN_SECTOR 0x04
#define SEEK_DONE 0x02
#define TIMER_DONE 0x01
/* Bits in error register */
#define ERR_DATA_CRC 0x80
#define ERR_ADDR_CRC 0x40
#define ERR_OVERRUN 0x04
#define ERR_UNDERRUN 0x01
/* Bits in setup register */
#define S_SW_RESET 0x80
#define S_GCR_WRITE 0x40
#define S_IBM_DRIVE 0x20
#define S_TEST_MODE 0x10
#define S_FCLK_DIV2 0x08
#define S_GCR 0x04
#define S_COPY_PROT 0x02
#define S_INV_WDATA 0x01
/* Select values for swim3_action */
#define SEEK_POSITIVE 0
#define SEEK_NEGATIVE 4
#define STEP 1
#define MOTOR_ON 2
#define MOTOR_OFF 6
#define INDEX 3
#define EJECT 7
#define SETMFM 9
#define SETGCR 13
/* Select values for swim3_select and swim3_readbit */
#define STEP_DIR 0
#define STEPPING 1
#define MOTOR_ON 2
#define RELAX 3 /* also eject in progress */
#define READ_DATA_0 4
#define TWOMEG_DRIVE 5
#define SINGLE_SIDED 6 /* drive or diskette is 4MB type? */
#define DRIVE_PRESENT 7
#define DISK_IN 8
#define WRITE_PROT 9
#define TRACK_ZERO 10
#define TACHO 11
#define READ_DATA_1 12
#define MFM_MODE 13
#define SEEK_COMPLETE 14
#define ONEMEG_MEDIA 15
/* Definitions of values used in writing and formatting */
#define DATA_ESCAPE 0x99
#define GCR_SYNC_EXC 0x3f
#define GCR_SYNC_CONV 0x80
#define GCR_FIRST_MARK 0xd5
#define GCR_SECOND_MARK 0xaa
#define GCR_ADDR_MARK "\xd5\xaa\x00"
#define GCR_DATA_MARK "\xd5\xaa\x0b"
#define GCR_SLIP_BYTE "\x27\xaa"
#define GCR_SELF_SYNC "\x3f\xbf\x1e\x34\x3c\x3f"
#define DATA_99 "\x99\x99"
#define MFM_ADDR_MARK "\x99\xa1\x99\xa1\x99\xa1\x99\xfe"
#define MFM_INDEX_MARK "\x99\xc2\x99\xc2\x99\xc2\x99\xfc"
#define MFM_GAP_LEN 12
struct floppy_state {
enum swim_state state;
struct swim3 __iomem *swim3; /* hardware registers */
struct dbdma_regs __iomem *dma; /* DMA controller registers */
int swim3_intr; /* interrupt number for SWIM3 */
int dma_intr; /* interrupt number for DMA channel */
int cur_cyl; /* cylinder head is on, or -1 */
int cur_sector; /* last sector we saw go past */
int req_cyl; /* the cylinder for the current r/w request */
int head; /* head number ditto */
int req_sector; /* sector number ditto */
int scount; /* # sectors we're transferring at present */
int retries;
int settle_time;
int secpercyl; /* disk geometry information */
int secpertrack;
int total_secs;
int write_prot; /* 1 if write-protected, 0 if not, -1 dunno */
struct dbdma_cmd *dma_cmd;
int ref_count;
int expect_cyl;
struct timer_list timeout;
int timeout_pending;
int ejected;
wait_queue_head_t wait;
int wanted;
powerpc/macio: Rework hotplug media bay support The hotplug mediabay has tendrils deep into drivers/ide code which makes a libata port reather difficult. In addition it's ugly and could be done better. This reworks the interface between the mediabay and the rest of the world so that: - Any macio_driver can now have a mediabay_event callback which will be called when that driver sits on a mediabay and it's been either plugged or unplugged. The device type is passed as an argument. We can now move all the IDE cruft into the IDE driver itself - A check_media_bay() function can be used to take a peek at the type of device currently in the bay if any, a cleaner variant of the previous function with the same name. - A pair of lock/unlock functions are exposed to allow the IDE driver to block the hotplug callbacks during the initial setup and probing of the bay in order to avoid nasty race conditions. - The mediabay code no longer needs to spin on the status register of the IDE interface when it detects an IDE device, this is done just fine by the IDE code itself Overall, less code, simpler, and allows for another driver than our old drivers/ide based one. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-01 22:36:28 +08:00
struct macio_dev *mdev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
char dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)];
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
int index;
struct request *cur_req;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
#define swim3_err(fmt, arg...) dev_err(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
#define swim3_warn(fmt, arg...) dev_warn(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
#define swim3_info(fmt, arg...) dev_info(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
#ifdef DEBUG
#define swim3_dbg(fmt, arg...) dev_dbg(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
#else
#define swim3_dbg(fmt, arg...) do { } while(0)
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static struct floppy_state floppy_states[MAX_FLOPPIES];
static int floppy_count = 0;
static DEFINE_SPINLOCK(swim3_lock);
static unsigned short write_preamble[] = {
0x4e4e, 0x4e4e, 0x4e4e, 0x4e4e, 0x4e4e, /* gap field */
0, 0, 0, 0, 0, 0, /* sync field */
0x99a1, 0x99a1, 0x99a1, 0x99fb, /* data address mark */
0x990f /* no escape for 512 bytes */
};
static unsigned short write_postamble[] = {
0x9904, /* insert CRC */
0x4e4e, 0x4e4e,
0x9908, /* stop writing */
0, 0, 0, 0, 0, 0
};
static void seek_track(struct floppy_state *fs, int n);
static void init_dma(struct dbdma_cmd *cp, int cmd, void *buf, int count);
static void act(struct floppy_state *fs);
static void scan_timeout(unsigned long data);
static void seek_timeout(unsigned long data);
static void settle_timeout(unsigned long data);
static void xfer_timeout(unsigned long data);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t swim3_interrupt(int irq, void *dev_id);
/*static void fd_dma_interrupt(int irq, void *dev_id);*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int grab_drive(struct floppy_state *fs, enum swim_state state,
int interruptible);
static void release_drive(struct floppy_state *fs);
static int fd_eject(struct floppy_state *fs);
[PATCH] switch swim3 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 23:20:44 +08:00
static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned int cmd, unsigned long param);
[PATCH] switch swim3 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 23:20:44 +08:00
static int floppy_open(struct block_device *bdev, fmode_t mode);
block_device_operations->release() should return void The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-06 09:52:57 +08:00
static void floppy_release(struct gendisk *disk, fmode_t mode);
swim[3]: Convert to bdops->check_events() Convert from ->media_changed() to ->check_events(). Both swim and swim3 buffer media changed state and clear it on revalidation. They will behave correctly with kernel event polling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Laurent Vivier <laurent@lvivier.info> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10 02:54:28 +08:00
static unsigned int floppy_check_events(struct gendisk *disk,
unsigned int clearing);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int floppy_revalidate(struct gendisk *disk);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
static bool swim3_end_request(struct floppy_state *fs, int err, unsigned int nr_bytes)
swim3: dequeue in-flight request swim3 has at most single request in flight and already tracks it using fd_req. Convert it to dequeuing model by updating request fetching and wrapping completion function. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-08 10:54:04 +08:00
{
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
struct request *req = fs->cur_req;
int rc;
swim3: dequeue in-flight request swim3 has at most single request in flight and already tracks it using fd_req. Convert it to dequeuing model by updating request fetching and wrapping completion function. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-08 10:54:04 +08:00
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg(" end request, err=%d nr_bytes=%d, cur_req=%p\n",
err, nr_bytes, req);
swim3: dequeue in-flight request swim3 has at most single request in flight and already tracks it using fd_req. Convert it to dequeuing model by updating request fetching and wrapping completion function. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-08 10:54:04 +08:00
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (err)
nr_bytes = blk_rq_cur_bytes(req);
rc = __blk_end_request(req, err, nr_bytes);
if (rc)
return true;
fs->cur_req = NULL;
return false;
swim3: dequeue in-flight request swim3 has at most single request in flight and already tracks it using fd_req. Convert it to dequeuing model by updating request fetching and wrapping completion function. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-08 10:54:04 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void swim3_select(struct floppy_state *fs, int sel)
{
struct swim3 __iomem *sw = fs->swim3;
out_8(&sw->select, RELAX);
if (sel & 8)
out_8(&sw->control_bis, SELECT);
else
out_8(&sw->control_bic, SELECT);
out_8(&sw->select, sel & CA_MASK);
}
static void swim3_action(struct floppy_state *fs, int action)
{
struct swim3 __iomem *sw = fs->swim3;
swim3_select(fs, action);
udelay(1);
out_8(&sw->select, sw->select | LSTRB);
udelay(2);
out_8(&sw->select, sw->select & ~LSTRB);
udelay(1);
}
static int swim3_readbit(struct floppy_state *fs, int bit)
{
struct swim3 __iomem *sw = fs->swim3;
int stat;
swim3_select(fs, bit);
udelay(1);
stat = in_8(&sw->status);
return (stat & DATA) == 0;
}
static void start_request(struct floppy_state *fs)
{
struct request *req;
unsigned long x;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg("start request, initial state=%d\n", fs->state);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (fs->state == idle && fs->wanted) {
fs->state = available;
wake_up(&fs->wait);
return;
}
swim3: dequeue in-flight request swim3 has at most single request in flight and already tracks it using fd_req. Convert it to dequeuing model by updating request fetching and wrapping completion function. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-08 10:54:04 +08:00
while (fs->state == idle) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg("start request, idle loop, cur_req=%p\n", fs->cur_req);
if (!fs->cur_req) {
fs->cur_req = blk_fetch_request(disks[fs->index]->queue);
swim3_dbg(" fetched request %p\n", fs->cur_req);
if (!fs->cur_req)
swim3: dequeue in-flight request swim3 has at most single request in flight and already tracks it using fd_req. Convert it to dequeuing model by updating request fetching and wrapping completion function. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-08 10:54:04 +08:00
break;
}
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
req = fs->cur_req;
if (fs->mdev->media_bay &&
check_media_bay(fs->mdev->media_bay) != MB_FD) {
swim3_dbg("%s", " media bay absent, dropping req\n");
swim3_end_request(fs, -ENODEV, 0);
continue;
}
#if 0 /* This is really too verbose */
swim3_dbg("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n",
req->rq_disk->disk_name, req->cmd,
(long)blk_rq_pos(req), blk_rq_sectors(req),
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 23:46:28 +08:00
bio_data(req->bio));
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg(" errors=%d current_nr_sectors=%u\n",
req->errors, blk_rq_cur_sectors(req));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 21:24:39 +08:00
if (blk_rq_pos(req) >= fs->total_secs) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg(" pos out of bounds (%ld, max is %ld)\n",
(long)blk_rq_pos(req), (long)fs->total_secs);
swim3_end_request(fs, -EIO, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
continue;
}
if (fs->ejected) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg("%s", " disk ejected\n");
swim3_end_request(fs, -EIO, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
continue;
}
if (rq_data_dir(req) == WRITE) {
if (fs->write_prot < 0)
fs->write_prot = swim3_readbit(fs, WRITE_PROT);
if (fs->write_prot) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg("%s", " try to write, disk write protected\n");
swim3_end_request(fs, -EIO, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
continue;
}
}
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 21:24:39 +08:00
/* Do not remove the cast. blk_rq_pos(req) is now a
* sector_t and can be 64 bits, but it will never go
* past 32 bits for this driver anyway, so we can
* safely cast it down and not have to do a 64/32
* division
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 21:24:39 +08:00
fs->req_cyl = ((long)blk_rq_pos(req)) / fs->secpercyl;
x = ((long)blk_rq_pos(req)) % fs->secpercyl;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->head = x / fs->secpertrack;
fs->req_sector = x % fs->secpertrack + 1;
fs->state = do_transfer;
fs->retries = 0;
act(fs);
}
}
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
static void do_fd_request(struct request_queue * q)
{
start_request(q->queuedata);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void set_timeout(struct floppy_state *fs, int nticks,
void (*proc)(unsigned long))
{
if (fs->timeout_pending)
del_timer(&fs->timeout);
fs->timeout.expires = jiffies + nticks;
fs->timeout.function = proc;
fs->timeout.data = (unsigned long) fs;
add_timer(&fs->timeout);
fs->timeout_pending = 1;
}
static inline void scan_track(struct floppy_state *fs)
{
struct swim3 __iomem *sw = fs->swim3;
swim3_select(fs, READ_DATA_0);
in_8(&sw->intr); /* clear SEEN_SECTOR bit */
in_8(&sw->error);
out_8(&sw->intr_enable, SEEN_SECTOR);
out_8(&sw->control_bis, DO_ACTION);
/* enable intr when track found */
set_timeout(fs, HZ, scan_timeout); /* enable timeout */
}
static inline void seek_track(struct floppy_state *fs, int n)
{
struct swim3 __iomem *sw = fs->swim3;
if (n >= 0) {
swim3_action(fs, SEEK_POSITIVE);
sw->nseek = n;
} else {
swim3_action(fs, SEEK_NEGATIVE);
sw->nseek = -n;
}
fs->expect_cyl = (fs->cur_cyl >= 0)? fs->cur_cyl + n: -1;
swim3_select(fs, STEP);
in_8(&sw->error);
/* enable intr when seek finished */
out_8(&sw->intr_enable, SEEK_DONE);
out_8(&sw->control_bis, DO_SEEK);
set_timeout(fs, 3*HZ, seek_timeout); /* enable timeout */
fs->settle_time = 0;
}
static inline void init_dma(struct dbdma_cmd *cp, int cmd,
void *buf, int count)
{
st_le16(&cp->req_count, count);
st_le16(&cp->command, cmd);
st_le32(&cp->phy_addr, virt_to_bus(buf));
cp->xfer_status = 0;
}
static inline void setup_transfer(struct floppy_state *fs)
{
int n;
struct swim3 __iomem *sw = fs->swim3;
struct dbdma_cmd *cp = fs->dma_cmd;
struct dbdma_regs __iomem *dr = fs->dma;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
struct request *req = fs->cur_req;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (blk_rq_cur_sectors(req) <= 0) {
swim3_warn("%s", "Transfer 0 sectors ?\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return;
}
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (rq_data_dir(req) == WRITE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
n = 1;
else {
n = fs->secpertrack - fs->req_sector + 1;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (n > blk_rq_cur_sectors(req))
n = blk_rq_cur_sectors(req);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg(" setup xfer at sect %d (of %d) head %d for %d\n",
fs->req_sector, fs->secpertrack, fs->head, n);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->scount = n;
swim3_select(fs, fs->head? READ_DATA_1: READ_DATA_0);
out_8(&sw->sector, fs->req_sector);
out_8(&sw->nsect, n);
out_8(&sw->gap3, 0);
out_le32(&dr->cmdptr, virt_to_bus(cp));
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (rq_data_dir(req) == WRITE) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Set up 3 dma commands: write preamble, data, postamble */
init_dma(cp, OUTPUT_MORE, write_preamble, sizeof(write_preamble));
++cp;
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 23:46:28 +08:00
init_dma(cp, OUTPUT_MORE, bio_data(req->bio), 512);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
++cp;
init_dma(cp, OUTPUT_LAST, write_postamble, sizeof(write_postamble));
} else {
block: remove struct request buffer member This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-10 23:46:28 +08:00
init_dma(cp, INPUT_LAST, bio_data(req->bio), n * 512);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
++cp;
out_le16(&cp->command, DBDMA_STOP);
out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS);
in_8(&sw->error);
out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (rq_data_dir(req) == WRITE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
out_8(&sw->control_bis, WRITE_SECTORS);
in_8(&sw->intr);
out_le32(&dr->control, (RUN << 16) | RUN);
/* enable intr when transfer complete */
out_8(&sw->intr_enable, TRANSFER_DONE);
out_8(&sw->control_bis, DO_ACTION);
set_timeout(fs, 2*HZ, xfer_timeout); /* enable timeout */
}
static void act(struct floppy_state *fs)
{
for (;;) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg(" act loop, state=%d, req_cyl=%d, cur_cyl=%d\n",
fs->state, fs->req_cyl, fs->cur_cyl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (fs->state) {
case idle:
return; /* XXX shouldn't get here */
case locating:
if (swim3_readbit(fs, TRACK_ZERO)) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg("%s", " locate track 0\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->cur_cyl = 0;
if (fs->req_cyl == 0)
fs->state = do_transfer;
else
fs->state = seeking;
break;
}
scan_track(fs);
return;
case seeking:
if (fs->cur_cyl < 0) {
fs->expect_cyl = -1;
fs->state = locating;
break;
}
if (fs->req_cyl == fs->cur_cyl) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_warn("%s", "Whoops, seeking 0\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->state = do_transfer;
break;
}
seek_track(fs, fs->req_cyl - fs->cur_cyl);
return;
case settling:
/* check for SEEK_COMPLETE after 30ms */
fs->settle_time = (HZ + 32) / 33;
set_timeout(fs, fs->settle_time, settle_timeout);
return;
case do_transfer:
if (fs->cur_cyl != fs->req_cyl) {
if (fs->retries > 5) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("Wrong cylinder in transfer, want: %d got %d\n",
fs->req_cyl, fs->cur_cyl);
swim3_end_request(fs, -EIO, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->state = idle;
return;
}
fs->state = seeking;
break;
}
setup_transfer(fs);
return;
case jogging:
seek_track(fs, -5);
return;
default:
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("Unknown state %d\n", fs->state);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return;
}
}
}
static void scan_timeout(unsigned long data)
{
struct floppy_state *fs = (struct floppy_state *) data;
struct swim3 __iomem *sw = fs->swim3;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
unsigned long flags;
swim3_dbg("* scan timeout, state=%d\n", fs->state);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
spin_lock_irqsave(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->timeout_pending = 0;
out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS);
out_8(&sw->select, RELAX);
out_8(&sw->intr_enable, 0);
fs->cur_cyl = -1;
if (fs->retries > 5) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_end_request(fs, -EIO, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->state = idle;
start_request(fs);
} else {
fs->state = jogging;
act(fs);
}
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
spin_unlock_irqrestore(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void seek_timeout(unsigned long data)
{
struct floppy_state *fs = (struct floppy_state *) data;
struct swim3 __iomem *sw = fs->swim3;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
unsigned long flags;
swim3_dbg("* seek timeout, state=%d\n", fs->state);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
spin_lock_irqsave(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->timeout_pending = 0;
out_8(&sw->control_bic, DO_SEEK);
out_8(&sw->select, RELAX);
out_8(&sw->intr_enable, 0);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("%s", "Seek timeout\n");
swim3_end_request(fs, -EIO, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->state = idle;
start_request(fs);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
spin_unlock_irqrestore(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void settle_timeout(unsigned long data)
{
struct floppy_state *fs = (struct floppy_state *) data;
struct swim3 __iomem *sw = fs->swim3;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
unsigned long flags;
swim3_dbg("* settle timeout, state=%d\n", fs->state);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
spin_lock_irqsave(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->timeout_pending = 0;
if (swim3_readbit(fs, SEEK_COMPLETE)) {
out_8(&sw->select, RELAX);
fs->state = locating;
act(fs);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
goto unlock;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
out_8(&sw->select, RELAX);
if (fs->settle_time < 2*HZ) {
++fs->settle_time;
set_timeout(fs, 1, settle_timeout);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
goto unlock;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("%s", "Seek settle timeout\n");
swim3_end_request(fs, -EIO, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->state = idle;
start_request(fs);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
unlock:
spin_unlock_irqrestore(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void xfer_timeout(unsigned long data)
{
struct floppy_state *fs = (struct floppy_state *) data;
struct swim3 __iomem *sw = fs->swim3;
struct dbdma_regs __iomem *dr = fs->dma;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
unsigned long flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int n;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg("* xfer timeout, state=%d\n", fs->state);
spin_lock_irqsave(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->timeout_pending = 0;
out_le32(&dr->control, RUN << 16);
/* We must wait a bit for dbdma to stop */
for (n = 0; (in_le32(&dr->status) & ACTIVE) && n < 1000; n++)
udelay(1);
out_8(&sw->intr_enable, 0);
out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION);
out_8(&sw->select, RELAX);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("Timeout %sing sector %ld\n",
(rq_data_dir(fs->cur_req)==WRITE? "writ": "read"),
(long)blk_rq_pos(fs->cur_req));
swim3_end_request(fs, -EIO, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->state = idle;
start_request(fs);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
spin_unlock_irqrestore(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t swim3_interrupt(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct floppy_state *fs = (struct floppy_state *) dev_id;
struct swim3 __iomem *sw = fs->swim3;
int intr, err, n;
int stat, resid;
struct dbdma_regs __iomem *dr;
struct dbdma_cmd *cp;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
unsigned long flags;
struct request *req = fs->cur_req;
swim3_dbg("* interrupt, state=%d\n", fs->state);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
spin_lock_irqsave(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
intr = in_8(&sw->intr);
err = (intr & ERROR_INTR)? in_8(&sw->error): 0;
if ((intr & ERROR_INTR) && fs->state != do_transfer)
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("Non-transfer error interrupt: state=%d, dir=%x, intr=%x, err=%x\n",
fs->state, rq_data_dir(req), intr, err);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (fs->state) {
case locating:
if (intr & SEEN_SECTOR) {
out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS);
out_8(&sw->select, RELAX);
out_8(&sw->intr_enable, 0);
del_timer(&fs->timeout);
fs->timeout_pending = 0;
if (sw->ctrack == 0xff) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("%s", "Seen sector but cyl=ff?\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->cur_cyl = -1;
if (fs->retries > 5) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_end_request(fs, -EIO, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->state = idle;
start_request(fs);
} else {
fs->state = jogging;
act(fs);
}
break;
}
fs->cur_cyl = sw->ctrack;
fs->cur_sector = sw->csect;
if (fs->expect_cyl != -1 && fs->expect_cyl != fs->cur_cyl)
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("Expected cyl %d, got %d\n",
fs->expect_cyl, fs->cur_cyl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->state = do_transfer;
act(fs);
}
break;
case seeking:
case jogging:
if (sw->nseek == 0) {
out_8(&sw->control_bic, DO_SEEK);
out_8(&sw->select, RELAX);
out_8(&sw->intr_enable, 0);
del_timer(&fs->timeout);
fs->timeout_pending = 0;
if (fs->state == seeking)
++fs->retries;
fs->state = settling;
act(fs);
}
break;
case settling:
out_8(&sw->intr_enable, 0);
del_timer(&fs->timeout);
fs->timeout_pending = 0;
act(fs);
break;
case do_transfer:
if ((intr & (ERROR_INTR | TRANSFER_DONE)) == 0)
break;
out_8(&sw->intr_enable, 0);
out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION);
out_8(&sw->select, RELAX);
del_timer(&fs->timeout);
fs->timeout_pending = 0;
dr = fs->dma;
cp = fs->dma_cmd;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (rq_data_dir(req) == WRITE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
++cp;
/*
* Check that the main data transfer has finished.
* On writing, the swim3 sometimes doesn't use
* up all the bytes of the postamble, so we can still
* see DMA active here. That doesn't matter as long
* as all the sector data has been transferred.
*/
if ((intr & ERROR_INTR) == 0 && cp->xfer_status == 0) {
/* wait a little while for DMA to complete */
for (n = 0; n < 100; ++n) {
if (cp->xfer_status != 0)
break;
udelay(1);
barrier();
}
}
/* turn off DMA */
out_le32(&dr->control, (RUN | PAUSE) << 16);
stat = ld_le16(&cp->xfer_status);
resid = ld_le16(&cp->res_count);
if (intr & ERROR_INTR) {
n = fs->scount - 1 - resid / 512;
if (n > 0) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
blk_update_request(req, 0, n << 9);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->req_sector += n;
}
if (fs->retries < 5) {
++fs->retries;
act(fs);
} else {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("Error %sing block %ld (err=%x)\n",
rq_data_dir(req) == WRITE? "writ": "read",
(long)blk_rq_pos(req), err);
swim3_end_request(fs, -EIO, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->state = idle;
}
} else {
if ((stat & ACTIVE) == 0 || resid != 0) {
/* musta been an error */
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("fd dma error: stat=%x resid=%d\n", stat, resid);
swim3_err(" state=%d, dir=%x, intr=%x, err=%x\n",
fs->state, rq_data_dir(req), intr, err);
swim3_end_request(fs, -EIO, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->state = idle;
start_request(fs);
break;
}
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
fs->retries = 0;
if (swim3_end_request(fs, 0, fs->scount << 9)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->req_sector += fs->scount;
if (fs->req_sector > fs->secpertrack) {
fs->req_sector -= fs->secpertrack;
if (++fs->head > 1) {
fs->head = 0;
++fs->req_cyl;
}
}
act(fs);
swim3: clean up request completion paths swim3 curiously tries to update request parameters before calling __blk_end_request() when __blk_end_request() will do it anyway, and it updates request for partial completion manually instead of using blk_update_request(). Also, it does some spurious checks on rq such as testing whether rq->sector is negative or current_nr_sectors is zero right after fetching. Drop unnecessary stuff and use standard block layer mechanisms. [ Impact: cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28 12:06:12 +08:00
} else
fs->state = idle;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (fs->state == idle)
start_request(fs);
break;
default:
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("Don't know what to do in state %d\n", fs->state);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
spin_unlock_irqrestore(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return IRQ_HANDLED;
}
/*
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static void fd_dma_interrupt(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
}
*/
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
/* Called under the mutex to grab exclusive access to a drive */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int grab_drive(struct floppy_state *fs, enum swim_state state,
int interruptible)
{
unsigned long flags;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg("%s", "-> grab drive\n");
spin_lock_irqsave(&swim3_lock, flags);
if (fs->state != idle && fs->state != available) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
++fs->wanted;
swim3: fix interruptible_sleep_on race interruptible_sleep_on is racy and going away. This replaces the one caller in the swim3 driver with the equivalent race-free wait_event_interruptible call. Since we're here already, this also fixes the case where we get interrupted from atomic context, which used to just spin in the loop. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-26 19:01:44 +08:00
/* this will enable irqs in order to sleep */
if (!interruptible)
wait_event_lock_irq(fs->wait,
fs->state == available,
swim3_lock);
else if (wait_event_interruptible_lock_irq(fs->wait,
fs->state == available,
swim3_lock)) {
--fs->wanted;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
spin_unlock_irqrestore(&swim3_lock, flags);
swim3: fix interruptible_sleep_on race interruptible_sleep_on is racy and going away. This replaces the one caller in the swim3 driver with the equivalent race-free wait_event_interruptible call. Since we're here already, this also fixes the case where we get interrupted from atomic context, which used to just spin in the loop. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-26 19:01:44 +08:00
return -EINTR;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
--fs->wanted;
}
fs->state = state;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
spin_unlock_irqrestore(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
static void release_drive(struct floppy_state *fs)
{
unsigned long flags;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_dbg("%s", "-> release drive\n");
spin_lock_irqsave(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->state = idle;
start_request(fs);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
spin_unlock_irqrestore(&swim3_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static int fd_eject(struct floppy_state *fs)
{
int err, n;
err = grab_drive(fs, ejecting, 1);
if (err)
return err;
swim3_action(fs, EJECT);
for (n = 20; n > 0; --n) {
if (signal_pending(current)) {
err = -EINTR;
break;
}
swim3_select(fs, RELAX);
[PATCH] drivers/block: fix-up schedule_timeout() usage Use schedule_timeout_{un,}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 15:27:28 +08:00
schedule_timeout_interruptible(1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (swim3_readbit(fs, DISK_IN) == 0)
break;
}
swim3_select(fs, RELAX);
udelay(150);
fs->ejected = 1;
release_drive(fs);
return err;
}
static struct floppy_struct floppy_type =
{ 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,NULL }; /* 7 1.44MB 3.5" */
block: push down BKL into .locked_ioctl As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-08 16:18:46 +08:00
static int floppy_locked_ioctl(struct block_device *bdev, fmode_t mode,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned int cmd, unsigned long param)
{
[PATCH] switch swim3 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 23:20:44 +08:00
struct floppy_state *fs = bdev->bd_disk->private_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int err;
if ((cmd & 0x80) && !capable(CAP_SYS_ADMIN))
return -EPERM;
powerpc/macio: Rework hotplug media bay support The hotplug mediabay has tendrils deep into drivers/ide code which makes a libata port reather difficult. In addition it's ugly and could be done better. This reworks the interface between the mediabay and the rest of the world so that: - Any macio_driver can now have a mediabay_event callback which will be called when that driver sits on a mediabay and it's been either plugged or unplugged. The device type is passed as an argument. We can now move all the IDE cruft into the IDE driver itself - A check_media_bay() function can be used to take a peek at the type of device currently in the bay if any, a cleaner variant of the previous function with the same name. - A pair of lock/unlock functions are exposed to allow the IDE driver to block the hotplug callbacks during the initial setup and probing of the bay in order to avoid nasty race conditions. - The mediabay code no longer needs to spin on the status register of the IDE interface when it detects an IDE device, this is done just fine by the IDE code itself Overall, less code, simpler, and allows for another driver than our old drivers/ide based one. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-01 22:36:28 +08:00
if (fs->mdev->media_bay &&
check_media_bay(fs->mdev->media_bay) != MB_FD)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -ENXIO;
switch (cmd) {
case FDEJECT:
if (fs->ref_count != 1)
return -EBUSY;
err = fd_eject(fs);
return err;
case FDGETPRM:
if (copy_to_user((void __user *) param, &floppy_type,
sizeof(struct floppy_struct)))
return -EFAULT;
return 0;
}
return -ENOTTY;
}
block: push down BKL into .locked_ioctl As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-08 16:18:46 +08:00
static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long param)
{
int ret;
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 20:28:52 +08:00
mutex_lock(&swim3_mutex);
block: push down BKL into .locked_ioctl As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-08 16:18:46 +08:00
ret = floppy_locked_ioctl(bdev, mode, cmd, param);
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 20:28:52 +08:00
mutex_unlock(&swim3_mutex);
block: push down BKL into .locked_ioctl As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-08 16:18:46 +08:00
return ret;
}
[PATCH] switch swim3 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 23:20:44 +08:00
static int floppy_open(struct block_device *bdev, fmode_t mode)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[PATCH] switch swim3 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 23:20:44 +08:00
struct floppy_state *fs = bdev->bd_disk->private_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct swim3 __iomem *sw = fs->swim3;
int n, err = 0;
if (fs->ref_count == 0) {
powerpc/macio: Rework hotplug media bay support The hotplug mediabay has tendrils deep into drivers/ide code which makes a libata port reather difficult. In addition it's ugly and could be done better. This reworks the interface between the mediabay and the rest of the world so that: - Any macio_driver can now have a mediabay_event callback which will be called when that driver sits on a mediabay and it's been either plugged or unplugged. The device type is passed as an argument. We can now move all the IDE cruft into the IDE driver itself - A check_media_bay() function can be used to take a peek at the type of device currently in the bay if any, a cleaner variant of the previous function with the same name. - A pair of lock/unlock functions are exposed to allow the IDE driver to block the hotplug callbacks during the initial setup and probing of the bay in order to avoid nasty race conditions. - The mediabay code no longer needs to spin on the status register of the IDE interface when it detects an IDE device, this is done just fine by the IDE code itself Overall, less code, simpler, and allows for another driver than our old drivers/ide based one. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-01 22:36:28 +08:00
if (fs->mdev->media_bay &&
check_media_bay(fs->mdev->media_bay) != MB_FD)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -ENXIO;
out_8(&sw->setup, S_IBM_DRIVE | S_FCLK_DIV2);
out_8(&sw->control_bic, 0xff);
out_8(&sw->mode, 0x95);
udelay(10);
out_8(&sw->intr_enable, 0);
out_8(&sw->control_bis, DRIVE_ENABLE | INTR_ENABLE);
swim3_action(fs, MOTOR_ON);
fs->write_prot = -1;
fs->cur_cyl = -1;
for (n = 0; n < 2 * HZ; ++n) {
if (n >= HZ/30 && swim3_readbit(fs, SEEK_COMPLETE))
break;
if (signal_pending(current)) {
err = -EINTR;
break;
}
swim3_select(fs, RELAX);
[PATCH] drivers/block: fix-up schedule_timeout() usage Use schedule_timeout_{un,}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 15:27:28 +08:00
schedule_timeout_interruptible(1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (err == 0 && (swim3_readbit(fs, SEEK_COMPLETE) == 0
|| swim3_readbit(fs, DISK_IN) == 0))
err = -ENXIO;
swim3_action(fs, SETMFM);
swim3_select(fs, RELAX);
[PATCH] switch swim3 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 23:20:44 +08:00
} else if (fs->ref_count == -1 || mode & FMODE_EXCL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EBUSY;
[PATCH] switch swim3 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 23:20:44 +08:00
if (err == 0 && (mode & FMODE_NDELAY) == 0
&& (mode & (FMODE_READ|FMODE_WRITE))) {
check_disk_change(bdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (fs->ejected)
err = -ENXIO;
}
[PATCH] switch swim3 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 23:20:44 +08:00
if (err == 0 && (mode & FMODE_WRITE)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (fs->write_prot < 0)
fs->write_prot = swim3_readbit(fs, WRITE_PROT);
if (fs->write_prot)
err = -EROFS;
}
if (err) {
if (fs->ref_count == 0) {
swim3_action(fs, MOTOR_OFF);
out_8(&sw->control_bic, DRIVE_ENABLE | INTR_ENABLE);
swim3_select(fs, RELAX);
}
return err;
}
[PATCH] switch swim3 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 23:20:44 +08:00
if (mode & FMODE_EXCL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->ref_count = -1;
else
++fs->ref_count;
return 0;
}
block: push down BKL into .open and .release The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-08 00:25:34 +08:00
static int floppy_unlocked_open(struct block_device *bdev, fmode_t mode)
{
int ret;
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 20:28:52 +08:00
mutex_lock(&swim3_mutex);
block: push down BKL into .open and .release The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-08 00:25:34 +08:00
ret = floppy_open(bdev, mode);
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 20:28:52 +08:00
mutex_unlock(&swim3_mutex);
block: push down BKL into .open and .release The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-08 00:25:34 +08:00
return ret;
}
block_device_operations->release() should return void The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-06 09:52:57 +08:00
static void floppy_release(struct gendisk *disk, fmode_t mode)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[PATCH] switch swim3 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 23:20:44 +08:00
struct floppy_state *fs = disk->private_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct swim3 __iomem *sw = fs->swim3;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 20:28:52 +08:00
mutex_lock(&swim3_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (fs->ref_count > 0 && --fs->ref_count == 0) {
swim3_action(fs, MOTOR_OFF);
out_8(&sw->control_bic, 0xff);
swim3_select(fs, RELAX);
}
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-06-02 20:28:52 +08:00
mutex_unlock(&swim3_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
swim[3]: Convert to bdops->check_events() Convert from ->media_changed() to ->check_events(). Both swim and swim3 buffer media changed state and clear it on revalidation. They will behave correctly with kernel event polling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Laurent Vivier <laurent@lvivier.info> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10 02:54:28 +08:00
static unsigned int floppy_check_events(struct gendisk *disk,
unsigned int clearing)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct floppy_state *fs = disk->private_data;
swim[3]: Convert to bdops->check_events() Convert from ->media_changed() to ->check_events(). Both swim and swim3 buffer media changed state and clear it on revalidation. They will behave correctly with kernel event polling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Laurent Vivier <laurent@lvivier.info> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10 02:54:28 +08:00
return fs->ejected ? DISK_EVENT_MEDIA_CHANGE : 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static int floppy_revalidate(struct gendisk *disk)
{
struct floppy_state *fs = disk->private_data;
struct swim3 __iomem *sw;
int ret, n;
powerpc/macio: Rework hotplug media bay support The hotplug mediabay has tendrils deep into drivers/ide code which makes a libata port reather difficult. In addition it's ugly and could be done better. This reworks the interface between the mediabay and the rest of the world so that: - Any macio_driver can now have a mediabay_event callback which will be called when that driver sits on a mediabay and it's been either plugged or unplugged. The device type is passed as an argument. We can now move all the IDE cruft into the IDE driver itself - A check_media_bay() function can be used to take a peek at the type of device currently in the bay if any, a cleaner variant of the previous function with the same name. - A pair of lock/unlock functions are exposed to allow the IDE driver to block the hotplug callbacks during the initial setup and probing of the bay in order to avoid nasty race conditions. - The mediabay code no longer needs to spin on the status register of the IDE interface when it detects an IDE device, this is done just fine by the IDE code itself Overall, less code, simpler, and allows for another driver than our old drivers/ide based one. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-01 22:36:28 +08:00
if (fs->mdev->media_bay &&
check_media_bay(fs->mdev->media_bay) != MB_FD)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -ENXIO;
sw = fs->swim3;
grab_drive(fs, revalidating, 0);
out_8(&sw->intr_enable, 0);
out_8(&sw->control_bis, DRIVE_ENABLE);
swim3_action(fs, MOTOR_ON); /* necessary? */
fs->write_prot = -1;
fs->cur_cyl = -1;
mdelay(1);
for (n = HZ; n > 0; --n) {
if (swim3_readbit(fs, SEEK_COMPLETE))
break;
if (signal_pending(current))
break;
swim3_select(fs, RELAX);
[PATCH] drivers/block: fix-up schedule_timeout() usage Use schedule_timeout_{un,}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 15:27:28 +08:00
schedule_timeout_interruptible(1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
ret = swim3_readbit(fs, SEEK_COMPLETE) == 0
|| swim3_readbit(fs, DISK_IN) == 0;
if (ret)
swim3_action(fs, MOTOR_OFF);
else {
fs->ejected = 0;
swim3_action(fs, SETMFM);
}
swim3_select(fs, RELAX);
release_drive(fs);
return ret;
}
const: make block_device_operations const Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 08:01:13 +08:00
static const struct block_device_operations floppy_fops = {
block: push down BKL into .open and .release The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-08 00:25:34 +08:00
.open = floppy_unlocked_open,
[PATCH] switch swim3 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-02 23:20:44 +08:00
.release = floppy_release,
block: push down BKL into .locked_ioctl As a preparation for the removal of the big kernel lock in the block layer, this removes the BKL from the common ioctl handling code, moving it into every single driver still using it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-08 16:18:46 +08:00
.ioctl = floppy_ioctl,
swim[3]: Convert to bdops->check_events() Convert from ->media_changed() to ->check_events(). Both swim and swim3 buffer media changed state and clear it on revalidation. They will behave correctly with kernel event polling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Laurent Vivier <laurent@lvivier.info> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-10 02:54:28 +08:00
.check_events = floppy_check_events,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.revalidate_disk= floppy_revalidate,
};
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
static void swim3_mb_event(struct macio_dev* mdev, int mb_state)
{
struct floppy_state *fs = macio_get_drvdata(mdev);
drivers/block/swim3.c: fix null pointer dereference The use of pointer fs should be after the null check. Signed-off-by: Cong Ding <dinggnu@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-22 07:16:40 +08:00
struct swim3 __iomem *sw;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (!fs)
return;
drivers/block/swim3.c: fix null pointer dereference The use of pointer fs should be after the null check. Signed-off-by: Cong Ding <dinggnu@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-22 07:16:40 +08:00
sw = fs->swim3;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (mb_state != MB_FD)
return;
/* Clear state */
out_8(&sw->intr_enable, 0);
in_8(&sw->intr);
in_8(&sw->error);
}
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
static int swim3_add_device(struct macio_dev *mdev, int index)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
of: Always use 'struct device.of_node' to get device node pointer. The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-14 07:12:29 +08:00
struct device_node *swim = mdev->ofdev.dev.of_node;
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
struct floppy_state *fs = &floppy_states[index];
int rc = -EBUSY;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
/* Do this first for message macros */
memset(fs, 0, sizeof(*fs));
fs->mdev = mdev;
fs->index = index;
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
/* Check & Request resources */
if (macio_resource_count(mdev) < 2) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("%s", "No address in device-tree\n");
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
return -ENXIO;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (macio_irq_count(mdev) < 1) {
swim3_err("%s", "No interrupt in device-tree\n");
return -ENXIO;
[PATCH] powerpc: Remove device_node addrs/n_addr The pre-parsed addrs/n_addrs fields in struct device_node are finally gone. Remove the dodgy heuristics that did that parsing at boot and remove the fields themselves since we now have a good replacement with the new OF parsing code. This patch also fixes a bunch of drivers to use the new code instead, so that at least pmac32, pseries, iseries and g5 defconfigs build. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-13 15:01:21 +08:00
}
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
if (macio_request_resource(mdev, 0, "swim3 (mmio)")) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("%s", "Can't request mmio resource\n");
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
return -EBUSY;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
if (macio_request_resource(mdev, 1, "swim3 (dma)")) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("%s", "Can't request dma resource\n");
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
macio_release_resource(mdev, 0);
return -EBUSY;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
dev_set_drvdata(&mdev->ofdev.dev, fs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
powerpc/macio: Rework hotplug media bay support The hotplug mediabay has tendrils deep into drivers/ide code which makes a libata port reather difficult. In addition it's ugly and could be done better. This reworks the interface between the mediabay and the rest of the world so that: - Any macio_driver can now have a mediabay_event callback which will be called when that driver sits on a mediabay and it's been either plugged or unplugged. The device type is passed as an argument. We can now move all the IDE cruft into the IDE driver itself - A check_media_bay() function can be used to take a peek at the type of device currently in the bay if any, a cleaner variant of the previous function with the same name. - A pair of lock/unlock functions are exposed to allow the IDE driver to block the hotplug callbacks during the initial setup and probing of the bay in order to avoid nasty race conditions. - The mediabay code no longer needs to spin on the status register of the IDE interface when it detects an IDE device, this is done just fine by the IDE code itself Overall, less code, simpler, and allows for another driver than our old drivers/ide based one. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-01 22:36:28 +08:00
if (mdev->media_bay == NULL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
fs->state = idle;
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
fs->swim3 = (struct swim3 __iomem *)
ioremap(macio_resource_start(mdev, 0), 0x200);
if (fs->swim3 == NULL) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("%s", "Couldn't map mmio registers\n");
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
rc = -ENOMEM;
goto out_release;
}
fs->dma = (struct dbdma_regs __iomem *)
ioremap(macio_resource_start(mdev, 1), 0x200);
if (fs->dma == NULL) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("%s", "Couldn't map dma registers\n");
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
iounmap(fs->swim3);
rc = -ENOMEM;
goto out_release;
}
fs->swim3_intr = macio_irq(mdev, 0);
trivial: remove unnecessary semicolons Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-19 02:18:35 +08:00
fs->dma_intr = macio_irq(mdev, 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fs->cur_cyl = -1;
fs->cur_sector = -1;
fs->secpercyl = 36;
fs->secpertrack = 18;
fs->total_secs = 2880;
init_waitqueue_head(&fs->wait);
fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space);
memset(fs->dma_cmd, 0, 2 * sizeof(struct dbdma_cmd));
st_le16(&fs->dma_cmd[1].command, DBDMA_STOP);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (mdev->media_bay == NULL || check_media_bay(mdev->media_bay) == MB_FD)
swim3_mb_event(mdev, MB_FD);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (request_irq(fs->swim3_intr, swim3_interrupt, 0, "SWIM3", fs)) {
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_err("%s", "Couldn't request interrupt\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
goto out_unmap;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EBUSY;
}
init_timer(&fs->timeout);
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
swim3_info("SWIM3 floppy controller %s\n",
powerpc/macio: Rework hotplug media bay support The hotplug mediabay has tendrils deep into drivers/ide code which makes a libata port reather difficult. In addition it's ugly and could be done better. This reworks the interface between the mediabay and the rest of the world so that: - Any macio_driver can now have a mediabay_event callback which will be called when that driver sits on a mediabay and it's been either plugged or unplugged. The device type is passed as an argument. We can now move all the IDE cruft into the IDE driver itself - A check_media_bay() function can be used to take a peek at the type of device currently in the bay if any, a cleaner variant of the previous function with the same name. - A pair of lock/unlock functions are exposed to allow the IDE driver to block the hotplug callbacks during the initial setup and probing of the bay in order to avoid nasty race conditions. - The mediabay code no longer needs to spin on the status register of the IDE interface when it detects an IDE device, this is done just fine by the IDE code itself Overall, less code, simpler, and allows for another driver than our old drivers/ide based one. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-01 22:36:28 +08:00
mdev->media_bay ? "in media bay" : "");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
return 0;
out_unmap:
iounmap(fs->dma);
iounmap(fs->swim3);
out_release:
macio_release_resource(mdev, 0);
macio_release_resource(mdev, 1);
return rc;
}
Drivers: block: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Mike Miller <mike.miller@hp.com> Cc: Chirag Kantharia <chirag.kantharia@hp.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Jim Paris <jim@jtan.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: NeilBrown <neilb@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Tao Guo <Tao.Guo@emc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 07:13:49 +08:00
static int swim3_attach(struct macio_dev *mdev,
const struct of_device_id *match)
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
{
struct gendisk *disk;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
int index, rc;
index = floppy_count++;
if (index >= MAX_FLOPPIES)
return -ENXIO;
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
/* Add the drive */
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
rc = swim3_add_device(mdev, index);
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
if (rc)
return rc;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
/* Now register that disk. Same comment about failure handling */
disk = disks[index] = alloc_disk(1);
if (disk == NULL)
return -ENOMEM;
disk->queue = blk_init_queue(do_fd_request, &swim3_lock);
if (disk->queue == NULL) {
put_disk(disk);
return -ENOMEM;
}
disk->queue->queuedata = &floppy_states[index];
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
if (index == 0) {
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
/* If we failed, there isn't much we can do as the driver is still
* too dumb to remove the device, just bail out
*/
if (register_blkdev(FLOPPY_MAJOR, "fd"))
return 0;
}
disk->major = FLOPPY_MAJOR;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
disk->first_minor = index;
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
disk->fops = &floppy_fops;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
disk->private_data = &floppy_states[index];
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
disk->flags |= GENHD_FL_REMOVABLE;
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
sprintf(disk->disk_name, "fd%d", index);
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
set_capacity(disk, 2880);
add_disk(disk);
return 0;
}
static struct of_device_id swim3_match[] =
{
{
.name = "swim3",
},
{
.compatible = "ohare-swim3"
},
{
.compatible = "swim3"
},
block: swim3: fix unterminated of_device_id table of_device_id structures need a NULL terminating entry, add it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-03 21:02:55 +08:00
{ /* end of list */ }
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
};
static struct macio_driver swim3_driver =
{
powerpc/macio: Fix probing of macio devices by using the right of match table Grant patches added an of mach table to struct device_driver. However, while he changed the macio device code to use that, he left the match table pointer in struct macio_driver and didn't update drivers to use the "new" one, thus breaking the probing. This completes the change by moving all drivers to setup the "new" one, removing all traces of the old one, and while at it (since it changes the exact same locations), I also remove two other duplicates from struct driver which are the name and owner fields. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02 15:09:18 +08:00
.driver = {
.name = "swim3",
.of_match_table = swim3_match,
},
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
.probe = swim3_attach,
block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 19:42:12 +08:00
#ifdef CONFIG_PMAC_MEDIABAY
.mediabay_event = swim3_mb_event,
#endif
[POWERPC] Update the SWIM3 (powermac) floppy driver Port the PowerMac floppy driver (swim3) to use the macio device infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 15:25:26 +08:00
#if 0
.suspend = swim3_suspend,
.resume = swim3_resume,
#endif
};
int swim3_init(void)
{
macio_register_driver(&swim3_driver);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
module_init(swim3_init)
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Paul Mackerras");
MODULE_ALIAS_BLOCKDEV_MAJOR(FLOPPY_MAJOR);