2013-12-13 09:49:05 +08:00
|
|
|
/*
|
|
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
|
|
* Copyright 2011 Linaro Ltd.
|
|
|
|
*
|
|
|
|
* The code contained herein is licensed under the GNU General Public
|
|
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
|
|
* Version 2 or later at the following locations:
|
|
|
|
*
|
|
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
|
|
*/
|
|
|
|
|
|
|
|
/ {
|
|
|
|
memory {
|
|
|
|
reg = <0x10000000 0x40000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
compatible = "simple-bus";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
reg_2p5v: regulator@0 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
reg = <0>;
|
|
|
|
regulator-name = "2P5V";
|
|
|
|
regulator-min-microvolt = <2500000>;
|
|
|
|
regulator-max-microvolt = <2500000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
reg_3p3v: regulator@1 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
reg = <1>;
|
|
|
|
regulator-name = "3P3V";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
reg_usb_otg_vbus: regulator@2 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
reg = <2>;
|
|
|
|
regulator-name = "usb_otg_vbus";
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
gpio = <&gpio3 22 0>;
|
|
|
|
enable-active-high;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
sound {
|
|
|
|
compatible = "fsl,imx6q-sabrelite-sgtl5000",
|
|
|
|
"fsl,imx-audio-sgtl5000";
|
|
|
|
model = "imx6q-sabrelite-sgtl5000";
|
|
|
|
ssi-controller = <&ssi1>;
|
|
|
|
audio-codec = <&codec>;
|
|
|
|
audio-routing =
|
|
|
|
"MIC_IN", "Mic Jack",
|
|
|
|
"Mic Jack", "Mic Bias",
|
|
|
|
"Headphone Jack", "HP_OUT";
|
|
|
|
mux-int-port = <1>;
|
|
|
|
mux-ext-port = <4>;
|
|
|
|
};
|
2013-12-17 09:12:59 +08:00
|
|
|
|
|
|
|
backlight_lcd {
|
|
|
|
compatible = "pwm-backlight";
|
|
|
|
pwms = <&pwm1 0 5000000>;
|
|
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
|
|
default-brightness-level = <7>;
|
|
|
|
power-supply = <®_3p3v>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
backlight_lvds {
|
|
|
|
compatible = "pwm-backlight";
|
|
|
|
pwms = <&pwm4 0 5000000>;
|
|
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
|
|
default-brightness-level = <7>;
|
|
|
|
power-supply = <®_3p3v>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
2013-12-13 09:49:05 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
&audmux {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&ecspi1 {
|
|
|
|
fsl,spi-num-chipselects = <1>;
|
|
|
|
cs-gpios = <&gpio3 19 0>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
flash: m25p80@0 {
|
|
|
|
compatible = "sst,sst25vf016b";
|
|
|
|
spi-max-frequency = <20000000>;
|
|
|
|
reg = <0>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&fec {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
|
|
phy-mode = "rgmii";
|
|
|
|
phy-reset-gpios = <&gpio3 23 0>;
|
2013-12-17 09:13:00 +08:00
|
|
|
txen-skew-ps = <0>;
|
|
|
|
txc-skew-ps = <3000>;
|
|
|
|
rxdv-skew-ps = <0>;
|
|
|
|
rxc-skew-ps = <3000>;
|
|
|
|
rxd0-skew-ps = <0>;
|
|
|
|
rxd1-skew-ps = <0>;
|
|
|
|
rxd2-skew-ps = <0>;
|
|
|
|
rxd3-skew-ps = <0>;
|
|
|
|
txd0-skew-ps = <0>;
|
|
|
|
txd1-skew-ps = <0>;
|
|
|
|
txd2-skew-ps = <0>;
|
|
|
|
txd3-skew-ps = <0>;
|
2013-12-13 09:49:05 +08:00
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c1 {
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
codec: sgtl5000@0a {
|
|
|
|
compatible = "fsl,sgtl5000";
|
|
|
|
reg = <0x0a>;
|
|
|
|
clocks = <&clks 201>;
|
|
|
|
VDDA-supply = <®_2p5v>;
|
|
|
|
VDDIO-supply = <®_3p3v>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&iomuxc {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
|
|
|
|
imx6q-sabrelite {
|
|
|
|
pinctrl_hog: hoggrp {
|
|
|
|
fsl,pins = <
|
2013-12-17 09:12:57 +08:00
|
|
|
/* SGTL5000 sys_mclk */
|
|
|
|
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
|
2013-12-13 09:49:05 +08:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_audmux: audmuxgrp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
|
|
|
|
MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
|
|
|
|
MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
|
|
|
|
MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
|
|
|
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
|
|
|
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
2013-12-17 09:12:54 +08:00
|
|
|
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */
|
2013-12-13 09:49:05 +08:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_enet: enetgrp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
|
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
|
|
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
|
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
|
|
|
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
2013-12-17 09:12:56 +08:00
|
|
|
/* Phy reset */
|
|
|
|
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0
|
2013-12-13 09:49:05 +08:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2013-12-17 09:12:59 +08:00
|
|
|
pinctrl_pwm1: pwm1grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_pwm3: pwm3grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_pwm4: pwm4grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2013-12-13 09:49:06 +08:00
|
|
|
pinctrl_uart1: uart1grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
|
|
|
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2013-12-13 09:49:05 +08:00
|
|
|
pinctrl_uart2: uart2grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
|
|
|
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
2013-12-17 09:12:55 +08:00
|
|
|
/* power enable, high active */
|
|
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
|
2013-12-13 09:49:05 +08:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
2013-12-17 09:12:53 +08:00
|
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
|
|
|
|
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WP */
|
2013-12-13 09:49:05 +08:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc4: usdhc4grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
|
|
|
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
|
|
|
|
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
|
|
|
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
|
|
|
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
|
|
|
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
2013-12-17 09:12:52 +08:00
|
|
|
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
|
2013-12-13 09:49:05 +08:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&ldb {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
lvds-channel@0 {
|
|
|
|
fsl,data-mapping = "spwg";
|
|
|
|
fsl,data-width = <18>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
display-timings {
|
|
|
|
native-mode = <&timing0>;
|
|
|
|
timing0: hsd100pxn1 {
|
|
|
|
clock-frequency = <65000000>;
|
|
|
|
hactive = <1024>;
|
|
|
|
vactive = <768>;
|
|
|
|
hback-porch = <220>;
|
|
|
|
hfront-porch = <40>;
|
|
|
|
vback-porch = <21>;
|
|
|
|
vfront-porch = <7>;
|
|
|
|
hsync-len = <60>;
|
|
|
|
vsync-len = <10>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&pcie {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2013-12-17 09:12:59 +08:00
|
|
|
&pwm1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&pwm3 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_pwm3>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&pwm4 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_pwm4>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2013-12-13 09:49:05 +08:00
|
|
|
&ssi1 {
|
|
|
|
fsl,mode = "i2s-slave";
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2013-12-13 09:49:06 +08:00
|
|
|
&uart1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2013-12-13 09:49:05 +08:00
|
|
|
&uart2 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usbh1 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usbotg {
|
|
|
|
vbus-supply = <®_usb_otg_vbus>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
|
|
disable-over-current;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usdhc3 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
|
|
cd-gpios = <&gpio7 0 0>;
|
|
|
|
wp-gpios = <&gpio7 1 0>;
|
|
|
|
vmmc-supply = <®_3p3v>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usdhc4 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usdhc4>;
|
|
|
|
cd-gpios = <&gpio2 6 0>;
|
|
|
|
vmmc-supply = <®_3p3v>;
|
|
|
|
status = "okay";
|
|
|
|
};
|