p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/gpu/drm/i915/i915_drv.h

673 lines
20 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* i915_drv.h -- Private header for the I915 driver -*- linux-c -*-
*/
drm: update to i915 1.3.0 Add support for vblank ioctls to i915 driver From: Dave Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-01-02 17:14:23 +08:00
/*
Add missing license texts from Tungsten Graphics. From: Alan Hourihane Signed-off-by: David Airlie <airlied@linux.ie>
2005-06-23 20:46:46 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
Add missing license texts from Tungsten Graphics. From: Alan Hourihane Signed-off-by: David Airlie <airlied@linux.ie>
2005-06-23 20:46:46 +08:00
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
drm: update to i915 1.3.0 Add support for vblank ioctls to i915 driver From: Dave Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-01-02 17:14:23 +08:00
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifndef _I915_DRV_H_
#define _I915_DRV_H_
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
#include "i915_reg.h"
i915: use io-mapping interfaces instead of a variety of mapping kludges Impact: optimize/clean-up the IO mapping implementation of the i915 DRM driver Switch the i915 device aperture mapping to the io-mapping interface, taking advantage of the cleaner API to extend it across all of the mapping uses, including both pwrite and relocation updates. This dramatically improves performance on 64-bit kernels which were using the same slow path as 32-bit non-HIGHMEM kernels prior to this patch. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 10:38:48 +08:00
#include <linux/io-mapping.h>
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* General customization:
*/
#define DRIVER_AUTHOR "Tungsten Graphics, Inc."
#define DRIVER_NAME "i915"
#define DRIVER_DESC "Intel Graphics"
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
#define DRIVER_DATE "20080730"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
separate i915 suspend/resume functions into their own file [Patch against drm-next. Consider this a trial balloon for our new Linux development model.] This is a big chunk of code. Separating it out makes it easier to change without churn on the main i915_drv.c file (and there will be churn as we fix bugs and add things like kernel mode setting). Also makes it easier to share this file with BSD. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-08-26 06:11:06 +08:00
enum pipe {
PIPE_A = 0,
PIPE_B,
};
drm: move drm vblank initialization/cleanup to driver load/unload drm vblank initialization keeps track of the changes in driver-supplied frame counts across vt switch and mode setting, but only if you let it by not tearing down the drm vblank structure. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-19 01:30:25 +08:00
#define I915_NUM_PIPE 2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Interface history:
*
* 1.1: Original.
drm: update to i915 1.3.0 Add support for vblank ioctls to i915 driver From: Dave Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-01-02 17:14:23 +08:00
* 1.2: Add Power Management
* 1.3: Add vblank support
drm: i915 patches from Tungsten Graphics Fix CMDBUFFER path, add heap destroy and flesh out sarea for rotation (Tungsten Graphics) From: Alan Hourihane <alanh@tungstengraphics.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-01-25 12:31:43 +08:00
* 1.4: Fix cmdbuffer path, add heap destroy
Add i915 ioctls to configure pipes for vblank interrupt. i915 vblanks can be generated from either pipe a or b, however a disabled pipe generates no interrupts. This change allows the X server to select which pipe generates vblank interrupts. From: Keith Packard <keith.packard@intel.com> via DRM CVS Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-06-24 15:07:34 +08:00
* 1.5: Add vblank pipe configuration
drm: i915 updates Add support for DRM_VBLANK_NEXTONMISS. Bump minor for swap scheduling ioctl and secondary vblank support. Avoid mis-counting vblank interrupts when they're only enabled for pipe A. Only schedule vblank tasklet if there are scheduled swaps pending. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-10-24 23:05:09 +08:00
* 1.6: - New ioctl for scheduling buffer swaps on vertical blank
* - Support vertical blank on secondary display pipe
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
#define DRIVER_MAJOR 1
drm: i915 updates Add support for DRM_VBLANK_NEXTONMISS. Bump minor for swap scheduling ioctl and secondary vblank support. Avoid mis-counting vblank interrupts when they're only enabled for pipe A. Only schedule vblank tasklet if there are scheduled swaps pending. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-10-24 23:05:09 +08:00
#define DRIVER_MINOR 6
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define DRIVER_PATCHLEVEL 0
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
#define WATCH_COHERENCY 0
#define WATCH_BUF 0
#define WATCH_EXEC 0
#define WATCH_LRU 0
#define WATCH_RELOC 0
#define WATCH_INACTIVE 0
#define WATCH_PWRITE 0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
typedef struct _drm_i915_ring_buffer {
int tail_mask;
unsigned long Size;
u8 *virtual_start;
int head;
int tail;
int space;
drm_local_map_t map;
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
struct drm_gem_object *ring_obj;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} drm_i915_ring_buffer_t;
struct mem_block {
struct mem_block *next;
struct mem_block *prev;
int start;
int size;
drm: Replace filp in ioctl arguments with drm_file *file_priv. As a fallout, replace filp storage with file_priv storage for "unique identifier of a client" all over the DRM. There is a 1:1 mapping, so this should be a noop. This could be a minor performance improvement, as everyth on Linux dereferenced filp to get file_priv anyway, while only the mmap ioct went the other direction. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25 18:23:09 +08:00
struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
drm: Rework vblank-wait handling to allow interrupt reduction. Previously, drivers supporting vblank interrupt waits would run the interrupt all the time, or all the time that any 3d client was running, preventing the CPU from sleeping for long when the system was otherwise idle. Now, interrupts are disabled any time that no client is waiting on a vblank event. The new method uses vblank counters on the chipsets when the interrupts are turned off, rather than counting interrupts, so that we can continue to present accurate vblank numbers. Co-author: Michel Dänzer <michel@tungstengraphics.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-01 03:14:26 +08:00
struct opregion_header;
struct opregion_acpi;
struct opregion_swsci;
struct opregion_asle;
Add Intel ACPI IGD OpRegion support This adds the support necessary for allowing ACPI backlight control to work on some newer Intel-based graphics systems. Tested on Thinkpad T61 and HP 2510p hardware. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-08-06 02:37:25 +08:00
struct intel_opregion {
struct opregion_header *header;
struct opregion_acpi *acpi;
struct opregion_swsci *swsci;
struct opregion_asle *asle;
int enabled;
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
typedef struct drm_i915_private {
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
struct drm_device *dev;
drm: Clean up many sparse warnings in i915. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-03 03:24:47 +08:00
void __iomem *regs;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
drm_local_map_t *sarea;
drm_i915_sarea_t *sarea_priv;
drm_i915_ring_buffer_t ring;
drm: update support for drm pci buffers The DRM needs to change the drm_pci interface for FreeBSD compatiblity, this patch introduces the drm_dma_handle_t and uses it in the Linux code. From: Tonnerre Lombard, Eric Anholt, and Sergey Vlasov Signed-off-by: David Airlie <airlied@linux.ie>
2005-07-10 13:38:56 +08:00
drm_dma_handle_t *status_page_dmah;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
void *hw_status_page;
dma_addr_t dma_status_page;
drm: Rework vblank-wait handling to allow interrupt reduction. Previously, drivers supporting vblank interrupt waits would run the interrupt all the time, or all the time that any 3d client was running, preventing the CPU from sleeping for long when the system was otherwise idle. Now, interrupts are disabled any time that no client is waiting on a vblank event. The new method uses vblank counters on the chipsets when the interrupts are turned off, rather than counting interrupts, so that we can continue to present accurate vblank numbers. Co-author: Michel Dänzer <michel@tungstengraphics.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-01 03:14:26 +08:00
uint32_t counter;
drm/i915: Add support for the G33, Q33, and Q35 chipsets. These require that the status page be referenced by a pointer in GTT, rather than phsyical memory. So, we have the X Server allocate that memory and tell us the address, instead. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-06-10 13:58:19 +08:00
unsigned int status_gfx_addr;
drm_local_map_t hws_map;
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
struct drm_gem_object *hws_obj;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
drm: i915: Add ioctl for scheduling buffer swaps at vertical blanks. This uses the core facility to schedule a driver callback that will be called ASAP after the given vertical blank interrupt with the HW lock held. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-10-24 21:37:43 +08:00
unsigned int cpp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int back_offset;
int front_offset;
int current_page;
int page_flipping;
wait_queue_head_t irq_queue;
atomic_t irq_received;
i915: Add support for MSI and interrupt mitigation. Previous attempts at interrupt mitigation had been foiled by i915_wait_irq's failure to update the sarea seqno value when the status page indicated that the seqno had already been passed. MSI support has been seen to cut CPU costs by up to 40% in some workloads by avoiding other expensive interrupt handlers for frequent graphics interrupts. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 03:10:39 +08:00
/** Protects user_irq_refcount and irq_mask_reg */
spinlock_t user_irq_lock;
/** Refcount for i915_user_irq_get() versus i915_user_irq_put(). */
int user_irq_refcount;
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 irq_mask_reg;
drm/i915: Manage PIPESTAT to control vblank interrupts instead of IMR. The pipestat fields affect reporting of all vblank-related interrupts, so we have to reset them during the irq_handler, and while enabling vblank interrupts. Otherwise, if a pipe status field had been set to non-zero before enabling reporting, we would never see an interrupt again. This patch adds i915_enable_pipestat and i915_disable_pipestat to abstract out the steps needed to change the reported interrupts. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-04 18:03:27 +08:00
u32 pipestat[2];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int tex_lru_log_granularity;
int allow_batchbuffer;
struct mem_block *agp_heap;
drm: update to i915 1.3.0 Add support for vblank ioctls to i915 driver From: Dave Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-01-02 17:14:23 +08:00
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
Add i915 ioctls to configure pipes for vblank interrupt. i915 vblanks can be generated from either pipe a or b, however a disabled pipe generates no interrupts. This change allows the X server to select which pipe generates vblank interrupts. From: Keith Packard <keith.packard@intel.com> via DRM CVS Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-06-24 15:07:34 +08:00
int vblank_pipe;
drm: i915: Add ioctl for scheduling buffer swaps at vertical blanks. This uses the core facility to schedule a driver callback that will be called ASAP after the given vertical blank interrupt with the HW lock held. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-10-24 21:37:43 +08:00
Add Intel ACPI IGD OpRegion support This adds the support necessary for allowing ACPI backlight control to work on some newer Intel-based graphics systems. Tested on Thinkpad T61 and HP 2510p hardware. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-08-06 02:37:25 +08:00
struct intel_opregion opregion;
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
/* Register state */
u8 saveLBB;
u32 saveDSPACNTR;
u32 saveDSPBCNTR;
drm/i915: save and restore dsparb and d_state registers. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-07 10:27:53 +08:00
u32 saveDSPARB;
i915: Save/restore MCHBAR_RENDER_STANDBY on GM965/GM45 This register is set by the 2D driver to prevent lockups, and so it needs to be preserved across suspend/resume too. This makes my X200s work. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-03 15:08:44 +08:00
u32 saveRENDERSTANDBY;
drm/i915: Save/restore HWS_PGA on suspend/resume It fixes suspend/resume failure of xf86-video-intel dri2 branch. As dri2 branch doesn't call I830DRIResume() to restore hardware status page anymore, we need to preserve this register across suspend/resume. Signed-off-by: Peng Li <peng.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-18 12:39:02 +08:00
u32 saveHWS;
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
u32 savePIPEACONF;
u32 savePIPEBCONF;
u32 savePIPEASRC;
u32 savePIPEBSRC;
u32 saveFPA0;
u32 saveFPA1;
u32 saveDPLL_A;
u32 saveDPLL_A_MD;
u32 saveHTOTAL_A;
u32 saveHBLANK_A;
u32 saveHSYNC_A;
u32 saveVTOTAL_A;
u32 saveVBLANK_A;
u32 saveVSYNC_A;
u32 saveBCLRPAT_A;
drm/i915: save/restore interrupt state On resume, if the interrupt state isn't restored correctly, we may end up with a flood of unexpected or ill-timed interrupts, which could cause the kernel to disable the interrupt or vblank events to happen at the wrong time. So save/restore them properly. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-20 07:39:58 +08:00
u32 savePIPEASTAT;
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
u32 saveDSPASTRIDE;
u32 saveDSPASIZE;
u32 saveDSPAPOS;
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
u32 saveDSPAADDR;
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
u32 saveDSPASURF;
u32 saveDSPATILEOFF;
u32 savePFIT_PGM_RATIOS;
u32 saveBLC_PWM_CTL;
u32 saveBLC_PWM_CTL2;
u32 saveFPB0;
u32 saveFPB1;
u32 saveDPLL_B;
u32 saveDPLL_B_MD;
u32 saveHTOTAL_B;
u32 saveHBLANK_B;
u32 saveHSYNC_B;
u32 saveVTOTAL_B;
u32 saveVBLANK_B;
u32 saveVSYNC_B;
u32 saveBCLRPAT_B;
drm/i915: save/restore interrupt state On resume, if the interrupt state isn't restored correctly, we may end up with a flood of unexpected or ill-timed interrupts, which could cause the kernel to disable the interrupt or vblank events to happen at the wrong time. So save/restore them properly. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-20 07:39:58 +08:00
u32 savePIPEBSTAT;
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
u32 saveDSPBSTRIDE;
u32 saveDSPBSIZE;
u32 saveDSPBPOS;
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
u32 saveDSPBADDR;
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
u32 saveDSPBSURF;
u32 saveDSPBTILEOFF;
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
u32 saveVGA0;
u32 saveVGA1;
u32 saveVGA_PD;
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
u32 saveVGACNTRL;
u32 saveADPA;
u32 saveLVDS;
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
u32 savePP_ON_DELAYS;
u32 savePP_OFF_DELAYS;
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
u32 saveDVOA;
u32 saveDVOB;
u32 saveDVOC;
u32 savePP_ON;
u32 savePP_OFF;
u32 savePP_CONTROL;
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
u32 savePP_DIVISOR;
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
u32 savePFIT_CONTROL;
u32 save_palette_a[256];
u32 save_palette_b[256];
u32 saveFBC_CFB_BASE;
u32 saveFBC_LL_BASE;
u32 saveFBC_CONTROL;
u32 saveFBC_CONTROL2;
drm/i915: save/restore interrupt state On resume, if the interrupt state isn't restored correctly, we may end up with a flood of unexpected or ill-timed interrupts, which could cause the kernel to disable the interrupt or vblank events to happen at the wrong time. So save/restore them properly. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-20 07:39:58 +08:00
u32 saveIER;
u32 saveIIR;
u32 saveIMR;
drm/i915 more registers for S3 (DSPCLK_GATE_D, CACHE_MODE_0, MI_ARB_STATE) Failing to preserve the MI_ARB_STATE register was causing FIFO underruns on the VGA output on my HP 2510p after resume. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-17 11:19:29 +08:00
u32 saveCACHE_MODE_0;
drm/i915: save and restore dsparb and d_state registers. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-07 10:27:53 +08:00
u32 saveD_STATE;
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
u32 saveCG_2D_DIS;
drm/i915 more registers for S3 (DSPCLK_GATE_D, CACHE_MODE_0, MI_ARB_STATE) Failing to preserve the MI_ARB_STATE register was causing FIFO underruns on the VGA output on my HP 2510p after resume. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-17 11:19:29 +08:00
u32 saveMI_ARB_STATE;
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
u32 saveSWF0[16];
u32 saveSWF1[16];
u32 saveSWF2[3];
u8 saveMSR;
u8 saveSR[8];
i915: Fix GR register array size off-by-one bug Make sure we have enough room for all the GR registers or we'll end up clobbering the AR index register (which should actually be harmless unless the BIOS is making an assumption about it). Noticed-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 03:15:20 +08:00
u8 saveGR[25];
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
u8 saveAR_INDEX;
drm/i915: fix off by one in VGA save/restore of AR & CR regs. turns out it's important to save/restore AR14 in particular. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-07 10:25:46 +08:00
u8 saveAR[21];
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
u8 saveDACMASK;
u8 saveDACDATA[256*3]; /* 256 3-byte colors */
drm/i915: fix off by one in VGA save/restore of AR & CR regs. turns out it's important to save/restore AR14 in particular. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-07 10:25:46 +08:00
u8 saveCR[37];
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
struct {
struct drm_mm gtt_space;
i915: use io-mapping interfaces instead of a variety of mapping kludges Impact: optimize/clean-up the IO mapping implementation of the i915 DRM driver Switch the i915 device aperture mapping to the io-mapping interface, taking advantage of the cleaner API to extend it across all of the mapping uses, including both pwrite and relocation updates. This dramatically improves performance on 64-bit kernels which were using the same slow path as 32-bit non-HIGHMEM kernels prior to this patch. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 10:38:48 +08:00
struct io_mapping *gtt_mapping;
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
/**
* List of objects currently involved in rendering from the
* ringbuffer.
*
* A reference is held on the buffer while on this list.
*/
struct list_head active_list;
/**
* List of objects which are not in the ringbuffer but which
* still have a write_domain which needs to be flushed before
* unbinding.
*
* A reference is held on the buffer while on this list.
*/
struct list_head flushing_list;
/**
* LRU list of objects which are not in the ringbuffer and
* are ready to unbind, but are still in the GTT.
*
* A reference is not held on the buffer while on this list,
* as merely being GTT-bound shouldn't prevent its being
* freed, and we'll pull it off the list in the free path.
*/
struct list_head inactive_list;
/**
* List of breadcrumbs associated with GPU requests currently
* outstanding.
*/
struct list_head request_list;
/**
* We leave the user IRQ off as much as possible,
* but this means that requests will finish and never
* be retired once the system goes idle. Set a timer to
* fire periodically while the ring is running. When it
* fires, go retire requests.
*/
struct delayed_work retire_work;
uint32_t next_gem_seqno;
/**
* Waiting sequence number, if any
*/
uint32_t waiting_gem_seqno;
/**
* Last seq seen at irq time
*/
uint32_t irq_gem_seqno;
/**
* Flag if the X Server, and thus DRM, is not currently in
* control of the device.
*
* This is set between LeaveVT and EnterVT. It needs to be
* replaced with a semaphore. It also needs to be
* transitioned away from for kernel modesetting.
*/
int suspended;
/**
* Flag if the hardware appears to be wedged.
*
* This is set when attempts to idle the device timeout.
* It prevents command submission from occuring and makes
* every pending request fail
*/
int wedged;
/** Bit 6 swizzling required for X tiling */
uint32_t bit_6_swizzle_x;
/** Bit 6 swizzling required for Y tiling */
uint32_t bit_6_swizzle_y;
} mm;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} drm_i915_private_t;
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
/** driver private structure attached to each drm_gem_object */
struct drm_i915_gem_object {
struct drm_gem_object *obj;
/** Current space allocated to this object in the GTT, if any. */
struct drm_mm_node *gtt_space;
/** This object's place on the active/flushing/inactive lists */
struct list_head list;
/**
* This is set if the object is on the active or flushing lists
* (has pending rendering), and is not set if it's on inactive (ready
* to be unbound).
*/
int active;
/**
* This is set if the object has been written to since last bound
* to the GTT
*/
int dirty;
/** AGP memory structure for our GTT binding. */
DRM_AGP_MEM *agp_mem;
struct page **page_list;
/**
* Current offset of the object in GTT space.
*
* This is the same as gtt_space->start
*/
uint32_t gtt_offset;
/** Boolean whether this object has a valid gtt offset. */
int gtt_bound;
/** How many users have pinned this object in GTT space */
int pin_count;
/** Breadcrumb of last rendering to the buffer. */
uint32_t last_rendering_seqno;
/** Current tiling mode for the object. */
uint32_t tiling_mode;
i915: Map status page cached for chips with GTT-based HWS location. This should improve performance by avoiding uncached reads by the CPU (the point of having a status page), and may improve stability. This patch only affects G33, GM45 and G45 chips as those are the only ones using GTT-based HWS mappings. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-15 10:55:10 +08:00
/** AGP mapping type (AGP_USER_MEMORY or AGP_USER_CACHED_MEMORY */
uint32_t agp_type;
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
/**
* Flagging of which individual pages are valid in GEM_DOMAIN_CPU when
* GEM_DOMAIN_CPU is not in the object's read domain.
*/
uint8_t *page_cpu_valid;
};
/**
* Request queue structure.
*
* The request queue allows us to note sequence numbers that have been emitted
* and may be associated with active buffers to be retired.
*
* By keeping this list, we can avoid having to do questionable
* sequence-number comparisons on buffer last_rendering_seqnos, and associate
* an emission time with seqnos for tracking how far ahead of the GPU we are.
*/
struct drm_i915_gem_request {
/** GEM sequence number associated with this request. */
uint32_t seqno;
/** Time at which this request was emitted, in jiffies. */
unsigned long emitted_jiffies;
/** Cache domains that were flushed at the start of the request. */
uint32_t flush_domains;
struct list_head list;
};
struct drm_i915_file_private {
struct {
uint32_t last_gem_seqno;
uint32_t last_gem_throttle_seqno;
} mm;
};
drm: Replace DRM_IOCTL_ARGS with (dev, data, file_priv) and remove DRM_DEVICE. The data is now in kernel space, copied in/out as appropriate according to t This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal with those failures. This also means that XFree86 4.2.0 support for i810 DR is lost. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-09-03 10:06:45 +08:00
extern struct drm_ioctl_desc i915_ioctls[];
drm: fix all sparse warning on 32-bit x86 Finally cleaned up the sparse warnings for the drm. Signed-off-by: Dave Airlie <airlied@linux.ie>
2005-09-30 16:37:36 +08:00
extern int i915_max_ioctl;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* i915_dma.c */
drm: remove drm_file_t, drm_device_t and drm_head_t typedefs some drivers still todo. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-07-11 13:53:27 +08:00
extern void i915_kernel_lost_context(struct drm_device * dev);
drm: rename driver hooks more understandably Rename the driver hooks in the DRM to something a little more understandable: preinit -> load postinit -> (removed) presetup -> firstopen postsetup -> (removed) open_helper -> open prerelease -> preclose free_filp_priv -> postclose pretakedown -> lastclose postcleanup -> unload release -> reclaim_buffers_locked version -> (removed) postinit and version were replaced with generic code in the Linux DRM (drivers now set their version numbers and description in the driver structure, like on BSD). postsetup wasn't used at all. Fixes the savage hooks for initializing and tearing down mappings at the right times. Testing involved at least starting X, running glxgears, killing glxgears, exiting X, and repeating. Tested on: FreeBSD (g200, g400, r200, r128) Linux (r200, savage4) From: Eric Anholt <anholt@freebsd.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2005-11-10 19:16:34 +08:00
extern int i915_driver_load(struct drm_device *, unsigned long flags);
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
extern int i915_driver_unload(struct drm_device *);
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
extern int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv);
drm: remove drm_file_t, drm_device_t and drm_head_t typedefs some drivers still todo. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-07-11 13:53:27 +08:00
extern void i915_driver_lastclose(struct drm_device * dev);
drm: Replace filp in ioctl arguments with drm_file *file_priv. As a fallout, replace filp storage with file_priv storage for "unique identifier of a client" all over the DRM. There is a 1:1 mapping, so this should be a noop. This could be a minor performance improvement, as everyth on Linux dereferenced filp to get file_priv anyway, while only the mmap ioct went the other direction. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25 18:23:09 +08:00
extern void i915_driver_preclose(struct drm_device *dev,
struct drm_file *file_priv);
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
extern void i915_driver_postclose(struct drm_device *dev,
struct drm_file *file_priv);
drm: remove drm_file_t, drm_device_t and drm_head_t typedefs some drivers still todo. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-07-11 13:53:27 +08:00
extern int i915_driver_device_is_agp(struct drm_device * dev);
drm: update to i915 1.3.0 Add support for vblank ioctls to i915 driver From: Dave Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-01-02 17:14:23 +08:00
extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg);
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
extern int i915_emit_box(struct drm_device *dev,
struct drm_clip_rect __user *boxes,
int i, int DR1, int DR4);
Revert "drm/vbl rework: rework how the drm deals with vblank." This reverts commit ac741ab71bb39e6977694ac0cc26678d8673cda4. Okay this looks like wasn't as fully baked as I'd led myself to believe. Revert for now for further baking. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-07 10:15:39 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* i915_irq.c */
drm: Replace DRM_IOCTL_ARGS with (dev, data, file_priv) and remove DRM_DEVICE. The data is now in kernel space, copied in/out as appropriate according to t This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal with those failures. This also means that XFree86 4.2.0 support for i810 DR is lost. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-09-03 10:06:45 +08:00
extern int i915_irq_emit(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int i915_irq_wait(struct drm_device *dev, void *data,
struct drm_file *file_priv);
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
void i915_user_irq_get(struct drm_device *dev);
void i915_user_irq_put(struct drm_device *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
drm: remove drm_file_t, drm_device_t and drm_head_t typedefs some drivers still todo. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-07-11 13:53:27 +08:00
extern void i915_driver_irq_preinstall(struct drm_device * dev);
drm: Rework vblank-wait handling to allow interrupt reduction. Previously, drivers supporting vblank interrupt waits would run the interrupt all the time, or all the time that any 3d client was running, preventing the CPU from sleeping for long when the system was otherwise idle. Now, interrupts are disabled any time that no client is waiting on a vblank event. The new method uses vblank counters on the chipsets when the interrupts are turned off, rather than counting interrupts, so that we can continue to present accurate vblank numbers. Co-author: Michel Dänzer <michel@tungstengraphics.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-01 03:14:26 +08:00
extern int i915_driver_irq_postinstall(struct drm_device *dev);
drm: remove drm_file_t, drm_device_t and drm_head_t typedefs some drivers still todo. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-07-11 13:53:27 +08:00
extern void i915_driver_irq_uninstall(struct drm_device * dev);
drm: Replace DRM_IOCTL_ARGS with (dev, data, file_priv) and remove DRM_DEVICE. The data is now in kernel space, copied in/out as appropriate according to t This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal with those failures. This also means that XFree86 4.2.0 support for i810 DR is lost. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-09-03 10:06:45 +08:00
extern int i915_vblank_pipe_set(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int i915_vblank_pipe_get(struct drm_device *dev, void *data,
struct drm_file *file_priv);
drm: Rework vblank-wait handling to allow interrupt reduction. Previously, drivers supporting vblank interrupt waits would run the interrupt all the time, or all the time that any 3d client was running, preventing the CPU from sleeping for long when the system was otherwise idle. Now, interrupts are disabled any time that no client is waiting on a vblank event. The new method uses vblank counters on the chipsets when the interrupts are turned off, rather than counting interrupts, so that we can continue to present accurate vblank numbers. Co-author: Michel Dänzer <michel@tungstengraphics.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-01 03:14:26 +08:00
extern int i915_enable_vblank(struct drm_device *dev, int crtc);
extern void i915_disable_vblank(struct drm_device *dev, int crtc);
extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc);
drm: Replace DRM_IOCTL_ARGS with (dev, data, file_priv) and remove DRM_DEVICE. The data is now in kernel space, copied in/out as appropriate according to t This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal with those failures. This also means that XFree86 4.2.0 support for i810 DR is lost. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-09-03 10:06:45 +08:00
extern int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv);
Add Intel ACPI IGD OpRegion support This adds the support necessary for allowing ACPI backlight control to work on some newer Intel-based graphics systems. Tested on Thinkpad T61 and HP 2510p hardware. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-08-06 02:37:25 +08:00
extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
drm/i915: Manage PIPESTAT to control vblank interrupts instead of IMR. The pipestat fields affect reporting of all vblank-related interrupts, so we have to reset them during the irq_handler, and while enabling vblank interrupts. Otherwise, if a pipe status field had been set to non-zero before enabling reporting, we would never see an interrupt again. This patch adds i915_enable_pipestat and i915_disable_pipestat to abstract out the steps needed to change the reported interrupts. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-04 18:03:27 +08:00
void
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
void
i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* i915_mem.c */
drm: Replace DRM_IOCTL_ARGS with (dev, data, file_priv) and remove DRM_DEVICE. The data is now in kernel space, copied in/out as appropriate according to t This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal with those failures. This also means that XFree86 4.2.0 support for i810 DR is lost. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-09-03 10:06:45 +08:00
extern int i915_mem_alloc(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int i915_mem_free(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int i915_mem_init_heap(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int i915_mem_destroy_heap(struct drm_device *dev, void *data,
struct drm_file *file_priv);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void i915_mem_takedown(struct mem_block **heap);
drm: remove drm_file_t, drm_device_t and drm_head_t typedefs some drivers still todo. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-07-11 13:53:27 +08:00
extern void i915_mem_release(struct drm_device * dev,
drm: Replace filp in ioctl arguments with drm_file *file_priv. As a fallout, replace filp storage with file_priv storage for "unique identifier of a client" all over the DRM. There is a 1:1 mapping, so this should be a noop. This could be a minor performance improvement, as everyth on Linux dereferenced filp to get file_priv anyway, while only the mmap ioct went the other direction. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25 18:23:09 +08:00
struct drm_file *file_priv, struct mem_block *heap);
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
/* i915_gem.c */
int i915_gem_init_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_create_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_pread_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_execbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_pin_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_busy_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_set_tiling(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_get_tiling(struct drm_device *dev, void *data,
struct drm_file *file_priv);
i915: Add GEM ioctl to get available aperture size. This will let userland know when to submit its batchbuffers, before they get too big to fit in the aperture. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23 12:40:13 +08:00
int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
drm: Add GEM ("graphics execution manager") to i915 driver. GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-31 03:06:12 +08:00
void i915_gem_load(struct drm_device *dev);
int i915_gem_proc_init(struct drm_minor *minor);
void i915_gem_proc_cleanup(struct drm_minor *minor);
int i915_gem_init_object(struct drm_gem_object *obj);
void i915_gem_free_object(struct drm_gem_object *obj);
int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment);
void i915_gem_object_unpin(struct drm_gem_object *obj);
void i915_gem_lastclose(struct drm_device *dev);
uint32_t i915_get_gem_seqno(struct drm_device *dev);
void i915_gem_retire_requests(struct drm_device *dev);
void i915_gem_retire_work_handler(struct work_struct *work);
void i915_gem_clflush_object(struct drm_gem_object *obj);
/* i915_gem_tiling.c */
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
/* i915_gem_debug.c */
void i915_gem_dump_object(struct drm_gem_object *obj, int len,
const char *where, uint32_t mark);
#if WATCH_INACTIVE
void i915_verify_inactive(struct drm_device *dev, char *file, int line);
#else
#define i915_verify_inactive(dev, file, line)
#endif
void i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle);
void i915_gem_dump_object(struct drm_gem_object *obj, int len,
const char *where, uint32_t mark);
void i915_dump_lru(struct drm_device *dev, const char *where);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
separate i915 suspend/resume functions into their own file [Patch against drm-next. Consider this a trial balloon for our new Linux development model.] This is a big chunk of code. Separating it out makes it easier to change without churn on the main i915_drv.c file (and there will be churn as we fix bugs and add things like kernel mode setting). Also makes it easier to share this file with BSD. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-08-26 06:11:06 +08:00
/* i915_suspend.c */
extern int i915_save_state(struct drm_device *dev);
extern int i915_restore_state(struct drm_device *dev);
drm: Rework vblank-wait handling to allow interrupt reduction. Previously, drivers supporting vblank interrupt waits would run the interrupt all the time, or all the time that any 3d client was running, preventing the CPU from sleeping for long when the system was otherwise idle. Now, interrupts are disabled any time that no client is waiting on a vblank event. The new method uses vblank counters on the chipsets when the interrupts are turned off, rather than counting interrupts, so that we can continue to present accurate vblank numbers. Co-author: Michel Dänzer <michel@tungstengraphics.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-01 03:14:26 +08:00
/* i915_suspend.c */
extern int i915_save_state(struct drm_device *dev);
extern int i915_restore_state(struct drm_device *dev);
separate i915 suspend/resume functions into their own file [Patch against drm-next. Consider this a trial balloon for our new Linux development model.] This is a big chunk of code. Separating it out makes it easier to change without churn on the main i915_drv.c file (and there will be churn as we fix bugs and add things like kernel mode setting). Also makes it easier to share this file with BSD. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-08-26 06:11:06 +08:00
build fix: CONFIG_DRM_I915=y && CONFIG_ACPI=n drivers/gpu/drm/i915/i915_opregion.c:340: error: implicit declaration of function ‘register_acpi_notifier’ drivers/gpu/drm/i915/i915_opregion.c:361: error: implicit declaration of function ‘unregister_acpi_notifier’ Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-25 05:18:10 +08:00
#ifdef CONFIG_ACPI
Add Intel ACPI IGD OpRegion support This adds the support necessary for allowing ACPI backlight control to work on some newer Intel-based graphics systems. Tested on Thinkpad T61 and HP 2510p hardware. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-08-06 02:37:25 +08:00
/* i915_opregion.c */
extern int intel_opregion_init(struct drm_device *dev);
extern void intel_opregion_free(struct drm_device *dev);
extern void opregion_asle_intr(struct drm_device *dev);
extern void opregion_enable_asle(struct drm_device *dev);
build fix: CONFIG_DRM_I915=y && CONFIG_ACPI=n drivers/gpu/drm/i915/i915_opregion.c:340: error: implicit declaration of function ‘register_acpi_notifier’ drivers/gpu/drm/i915/i915_opregion.c:361: error: implicit declaration of function ‘unregister_acpi_notifier’ Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-25 05:18:10 +08:00
#else
static inline int intel_opregion_init(struct drm_device *dev) { return 0; }
static inline void intel_opregion_free(struct drm_device *dev) { return; }
static inline void opregion_asle_intr(struct drm_device *dev) { return; }
static inline void opregion_enable_asle(struct drm_device *dev) { return; }
#endif
Add Intel ACPI IGD OpRegion support This adds the support necessary for allowing ACPI backlight control to work on some newer Intel-based graphics systems. Tested on Thinkpad T61 and HP 2510p hardware. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-08-06 02:37:25 +08:00
i915: Use struct_mutex to protect ring in GEM mode. In the conversion for GEM, we had stopped using the hardware lock to protect ring usage, since it was all internal to the DRM now. However, some paths weren't converted to using struct_mutex to prevent multiple threads from concurrently working on the ring, in particular between the vblank swap handler and ioctls. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-09-02 07:45:29 +08:00
/**
* Lock test for when it's just for synchronization of ring access.
*
* In that case, we don't need to do it when GEM is initialized as nobody else
* has access to the ring.
*/
#define RING_LOCK_TEST_WITH_RETURN(dev, file_priv) do { \
if (((drm_i915_private_t *)dev->dev_private)->ring.ring_obj == NULL) \
LOCK_TEST_WITH_RETURN(dev, file_priv); \
} while (0)
drm: Clean up many sparse warnings in i915. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-03 03:24:47 +08:00
#define I915_READ(reg) readl(dev_priv->regs + (reg))
#define I915_WRITE(reg, val) writel(val, dev_priv->regs + (reg))
#define I915_READ16(reg) readw(dev_priv->regs + (reg))
#define I915_WRITE16(reg, val) writel(val, dev_priv->regs + (reg))
#define I915_READ8(reg) readb(dev_priv->regs + (reg))
#define I915_WRITE8(reg, val) writeb(val, dev_priv->regs + (reg))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define I915_VERBOSE 0
#define RING_LOCALS unsigned int outring, ringmask, outcount; \
volatile char *virt;
#define BEGIN_LP_RING(n) do { \
if (I915_VERBOSE) \
drm: cleanup DRM_DEBUG() parameters As DRM_DEBUG macro already prints out the __FUNCTION__ string (see drivers/char/drm/drmP.h), it is not worth doing this again. At some other places the ending "\n" was added. airlied:- I cleaned up a few that this patch missed also Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-01-24 13:58:57 +08:00
DRM_DEBUG("BEGIN_LP_RING(%d)\n", (n)); \
if (dev_priv->ring.space < (n)*4) \
drivers/char: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 15:55:10 +08:00
i915_wait_ring(dev, (n)*4, __func__); \
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
outcount = 0; \
outring = dev_priv->ring.tail; \
ringmask = dev_priv->ring.tail_mask; \
virt = dev_priv->ring.virtual_start; \
} while (0)
#define OUT_RING(n) do { \
if (I915_VERBOSE) DRM_DEBUG(" OUT_RING %x\n", (int)(n)); \
drm: Add support for Intel i965G chipsets. This is a patch prepared by Guangdeng Liao based off of Tungsten Graphics's final code drop. From: Alan Hourihane <alanh@tungstengraphics.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-08-12 14:29:24 +08:00
*(volatile unsigned int *)(virt + outring) = (n); \
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
outcount++; \
outring += 4; \
outring &= ringmask; \
} while (0)
#define ADVANCE_LP_RING() do { \
if (I915_VERBOSE) DRM_DEBUG("ADVANCE_LP_RING %x\n", outring); \
dev_priv->ring.tail = outring; \
dev_priv->ring.space -= outcount * 4; \
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
I915_WRITE(PRB0_TAIL, outring); \
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} while(0)
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
/**
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
* Reads a dword out of the status page, which is written to from the command
* queue by automatic updates, MI_REPORT_HEAD, MI_STORE_DATA_INDEX, or
* MI_STORE_DATA_IMM.
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
*
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
* The following dwords have a reserved meaning:
i915: Use non-reserved status page index for breadcrumb Dwords 0 through 0x1f are reserved for use by the hardware. Move the GEM breadcrumb from 0x10 to 0x20 to keep out of this area. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-15 08:19:38 +08:00
* 0x00: ISR copy, updated when an ISR bit not set in the HWSTAM changes.
* 0x04: ring 0 head pointer
* 0x05: ring 1 head pointer (915-class)
* 0x06: ring 2 head pointer (915-class)
* 0x10-0x1b: Context status DWords (GM45)
* 0x1f: Last written status offset. (GM45)
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
*
i915: Use non-reserved status page index for breadcrumb Dwords 0 through 0x1f are reserved for use by the hardware. Move the GEM breadcrumb from 0x10 to 0x20 to keep out of this area. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-15 08:19:38 +08:00
* The area from dword 0x20 to 0x3ff is available for driver usage.
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
*/
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg])
drm/i915: Move legacy breadcrumb out of the reserved status page area Addresses in the hardware status page below index 0x20 are reserved for use by the hardware. The legacy breadcrumb was sitting at index 5. Move it to index 0x21, and make sure everyone uses the defined value instead of hard-coded constants. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-08 09:44:14 +08:00
#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, I915_BREADCRUMB_INDEX)
i915: Use non-reserved status page index for breadcrumb Dwords 0 through 0x1f are reserved for use by the hardware. Move the GEM breadcrumb from 0x10 to 0x20 to keep out of this area. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-15 08:19:38 +08:00
#define I915_GEM_HWS_INDEX 0x20
drm/i915: Move legacy breadcrumb out of the reserved status page area Addresses in the hardware status page below index 0x20 are reserved for use by the hardware. The legacy breadcrumb was sitting at index 5. Move it to index 0x21, and make sure everyone uses the defined value instead of hard-coded constants. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-08 09:44:14 +08:00
#define I915_BREADCRUMB_INDEX 0x21
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
i915: Use more consistent names for regs, and store them in a separate file. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-30 02:54:06 +08:00
extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
#define IS_I830(dev) ((dev)->pci_device == 0x3577)
#define IS_845G(dev) ((dev)->pci_device == 0x2562)
#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
#define IS_I855(dev) ((dev)->pci_device == 0x3582)
#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
drm/i915: add support for E7221 chipset E7221 chipset is a server version of the i915. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-01-23 14:41:17 +08:00
#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a)
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
fix IS_I9XX macro in i915 DRM driver Now that we're mapping registers in the DRM driver at load time, the driver actually checks the PCI ID, so we need to make sure the macros have all the right bits (and longer term use the DRM headers as the sole copy of the PCI & register definitions). This patch adds 945GME support to the DRM headers, fixing a regression reported in http://bugzilla.kernel.org/show_bug.cgi?id=10395. Tested-by: Alexander Oltu <alexander@all-2.com> Signed-off-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-07 02:55:04 +08:00
#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\
(dev)->pci_device == 0x27AE)
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
(dev)->pci_device == 0x2982 || \
(dev)->pci_device == 0x2992 || \
(dev)->pci_device == 0x29A2 || \
(dev)->pci_device == 0x2A02 || \
i915: Add chipset id for Intel Integrated Graphics Device This adds new chipset id in drm. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-01-24 14:46:36 +08:00
(dev)->pci_device == 0x2A12 || \
drm/i915: add support for Intel series 4 chipsets. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-20 10:12:56 +08:00
(dev)->pci_device == 0x2A42 || \
(dev)->pci_device == 0x2E02 || \
(dev)->pci_device == 0x2E12 || \
(dev)->pci_device == 0x2E22)
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
new chip name is GM45 Author: Zhenyu Wang <zhenyu.z.wang@intel.com> i915: official name for GM45 chipset Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-08-26 06:16:19 +08:00
#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
i915: Add chipset id for Intel Integrated Graphics Device This adds new chipset id in drm. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-01-24 14:46:36 +08:00
drm/i915: add support for Intel series 4 chipsets. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-20 10:12:56 +08:00
#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
(dev)->pci_device == 0x2E12 || \
(dev)->pci_device == 0x2E22)
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \
(dev)->pci_device == 0x29B2 || \
(dev)->pci_device == 0x29D2)
#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev))
#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
new chip name is GM45 Author: Zhenyu Wang <zhenyu.z.wang@intel.com> i915: official name for GM45 chipset Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-08-26 06:16:19 +08:00
IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev))
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
new chip name is GM45 Author: Zhenyu Wang <zhenyu.z.wang@intel.com> i915: official name for GM45 chipset Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-08-26 06:16:19 +08:00
#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev))
i915: wrap chipset types requiring hw status set ioctl Also applys to recent added new chipset. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-19 18:59:09 +08:00
i915: add suspend/resume support Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-22 12:14:14 +08:00
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
drm: update to i915 1.3.0 Add support for vblank ioctls to i915 driver From: Dave Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-01-02 17:14:23 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif