p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/include/asm-mips/mach-cobalt/cobalt.h

96 lines
3.2 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Lowlevel hardware stuff for the MIPS based Cobalt microservers.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1997 Cobalt Microserver
* Copyright (C) 1997, 2003 Ralf Baechle
* Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv)
*/
#ifndef __ASM_COBALT_H
#define __ASM_COBALT_H
[MIPS] Define MIPS_CPU_IRQ_BASE in generic header The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-01-08 01:14:29 +08:00
#include <irq.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* i8259 legacy interrupts used on Cobalt:
*
* 8 - RTC
* 9 - PCI
* 14 - IDE0
* 15 - IDE1
Resurrect Cobalt support for 2.6. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-02-22 00:18:36 +08:00
*/
#define COBALT_QUBE_SLOT_IRQ 9
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* CPU IRQs are 16 ... 23
*/
[MIPS] Define MIPS_CPU_IRQ_BASE in generic header The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-01-08 01:14:29 +08:00
#define COBALT_CPU_IRQ MIPS_CPU_IRQ_BASE
Resurrect Cobalt support for 2.6. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-02-22 00:18:36 +08:00
#define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2)
#define COBALT_SCC_IRQ (COBALT_CPU_IRQ + 3) /* pre-production has 85C30 */
#define COBALT_RAQ_SCSI_IRQ (COBALT_CPU_IRQ + 3)
#define COBALT_ETH0_IRQ (COBALT_CPU_IRQ + 3)
#define COBALT_QUBE1_ETH0_IRQ (COBALT_CPU_IRQ + 4)
#define COBALT_ETH1_IRQ (COBALT_CPU_IRQ + 4)
#define COBALT_SERIAL_IRQ (COBALT_CPU_IRQ + 5)
#define COBALT_SCSI_IRQ (COBALT_CPU_IRQ + 5)
#define COBALT_VIA_IRQ (COBALT_CPU_IRQ + 6) /* Chained to VIA ISA bridge */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* PCI configuration space manifest constants. These are wired into
* the board layout according to the PCI spec to enable the software
* to probe the hardware configuration space in a well defined manner.
*
* The PCI_DEVSHFT() macro transforms these values into numbers
* suitable for passing as the dev parameter to the various
* pcibios_read/write_config routines.
*/
#define COBALT_PCICONF_CPU 0x06
#define COBALT_PCICONF_ETH0 0x07
#define COBALT_PCICONF_RAQSCSI 0x08
#define COBALT_PCICONF_VIA 0x09
#define COBALT_PCICONF_PCISLOT 0x0A
#define COBALT_PCICONF_ETH1 0x0C
/*
* The Cobalt board id information. The boards have an ID number wired
* into the VIA that is available in the high nibble of register 94.
* This register is available in the VIA configuration space through the
* interface routines qube_pcibios_read/write_config. See cobalt/pci.c
*/
#define VIA_COBALT_BRD_ID_REG 0x94
#define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char) (reg) >> 4)
#define COBALT_BRD_ID_QUBE1 0x3
#define COBALT_BRD_ID_RAQ1 0x4
#define COBALT_BRD_ID_QUBE2 0x5
#define COBALT_BRD_ID_RAQ2 0x6
#define PCI_CFG_SET(devfn,where) \
[MIPS] Rewrite GALILEO_INL/GALILEO_OUTL to GT_READ/GT_WRITE This patch has rewritten GALILEO_INL/GALILEO_OUTL using GT_READ/GT_WRITE. This patch tested on Cobalt Qube2. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-13 23:25:04 +08:00
GT_WRITE(GT_PCI0_CFGADDR_OFS, (0x80000000 | (PCI_SLOT (devfn) << 11) | \
(PCI_FUNC (devfn) << 8) | (where)))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
Resurrect Cobalt support for 2.6. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-02-22 00:18:36 +08:00
#define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
# define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */
# define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */
# define COBALT_LED_WEB (1 << 2) /* RaQ */
# define COBALT_LED_POWER_OFF (1 << 3) /* RaQ */
# define COBALT_LED_RESET 0x0f
#define COBALT_KEY_PORT ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK)
# define COBALT_KEY_CLEAR (1 << 1)
# define COBALT_KEY_LEFT (1 << 2)
# define COBALT_KEY_UP (1 << 3)
# define COBALT_KEY_DOWN (1 << 4)
# define COBALT_KEY_RIGHT (1 << 5)
# define COBALT_KEY_ENTER (1 << 6)
# define COBALT_KEY_SELECT (1 << 7)
# define COBALT_KEY_MASK 0xfe
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[MIPS] Add early console for Cobalt. Signed-off-by: Peter Horton <pdh@colonel-panic.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-13 01:10:25 +08:00
#define COBALT_UART ((volatile unsigned char *) CKSEG1ADDR(0x1c800000))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* __ASM_COBALT_H */