drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
/*
|
|
|
|
* Copyright 2013 Red Hat Inc.
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
|
|
* to deal in the Software without restriction, including without limitation
|
|
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be included in
|
|
|
|
* all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
|
|
|
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
|
|
|
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* Authors: Dave Airlie
|
|
|
|
* Alon Levy
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "qxl_drv.h"
|
|
|
|
#include "qxl_object.h"
|
|
|
|
|
|
|
|
#include <linux/io-mapping.h>
|
|
|
|
static void qxl_ttm_bo_destroy(struct ttm_buffer_object *tbo)
|
|
|
|
{
|
|
|
|
struct qxl_bo *bo;
|
|
|
|
struct qxl_device *qdev;
|
|
|
|
|
2015-12-15 19:20:56 +08:00
|
|
|
bo = to_qxl_bo(tbo);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
qdev = (struct qxl_device *)bo->gem_base.dev->dev_private;
|
|
|
|
|
|
|
|
qxl_surface_evict(qdev, bo, false);
|
|
|
|
mutex_lock(&qdev->gem.mutex);
|
|
|
|
list_del_init(&bo->list);
|
|
|
|
mutex_unlock(&qdev->gem.mutex);
|
|
|
|
drm_gem_object_release(&bo->gem_base);
|
|
|
|
kfree(bo);
|
|
|
|
}
|
|
|
|
|
|
|
|
bool qxl_ttm_bo_is_qxl_bo(struct ttm_buffer_object *bo)
|
|
|
|
{
|
|
|
|
if (bo->destroy == &qxl_ttm_bo_destroy)
|
|
|
|
return true;
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2013-07-23 12:06:07 +08:00
|
|
|
void qxl_ttm_placement_from_domain(struct qxl_bo *qbo, u32 domain, bool pinned)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
{
|
|
|
|
u32 c = 0;
|
2013-07-23 12:06:07 +08:00
|
|
|
u32 pflag = pinned ? TTM_PL_FLAG_NO_EVICT : 0;
|
2014-08-27 19:16:04 +08:00
|
|
|
unsigned i;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
|
|
|
|
qbo->placement.placement = qbo->placements;
|
|
|
|
qbo->placement.busy_placement = qbo->placements;
|
2013-04-16 11:36:00 +08:00
|
|
|
if (domain == QXL_GEM_DOMAIN_VRAM)
|
2014-08-27 19:16:04 +08:00
|
|
|
qbo->placements[c++].flags = TTM_PL_FLAG_CACHED | TTM_PL_FLAG_VRAM | pflag;
|
2013-04-16 11:36:00 +08:00
|
|
|
if (domain == QXL_GEM_DOMAIN_SURFACE)
|
2016-09-12 19:34:37 +08:00
|
|
|
qbo->placements[c++].flags = TTM_PL_FLAG_CACHED | TTM_PL_FLAG_PRIV | pflag;
|
2013-04-16 11:36:00 +08:00
|
|
|
if (domain == QXL_GEM_DOMAIN_CPU)
|
2014-08-27 19:16:04 +08:00
|
|
|
qbo->placements[c++].flags = TTM_PL_MASK_CACHING | TTM_PL_FLAG_SYSTEM | pflag;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
if (!c)
|
2014-08-27 19:16:04 +08:00
|
|
|
qbo->placements[c++].flags = TTM_PL_MASK_CACHING | TTM_PL_FLAG_SYSTEM;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
qbo->placement.num_placement = c;
|
|
|
|
qbo->placement.num_busy_placement = c;
|
2014-08-27 19:16:04 +08:00
|
|
|
for (i = 0; i < c; ++i) {
|
|
|
|
qbo->placements[i].fpfn = 0;
|
|
|
|
qbo->placements[i].lpfn = 0;
|
|
|
|
}
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
int qxl_bo_create(struct qxl_device *qdev,
|
2013-07-23 12:06:07 +08:00
|
|
|
unsigned long size, bool kernel, bool pinned, u32 domain,
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
struct qxl_surface *surf,
|
|
|
|
struct qxl_bo **bo_ptr)
|
|
|
|
{
|
|
|
|
struct qxl_bo *bo;
|
|
|
|
enum ttm_bo_type type;
|
|
|
|
int r;
|
|
|
|
|
|
|
|
if (kernel)
|
|
|
|
type = ttm_bo_type_kernel;
|
|
|
|
else
|
|
|
|
type = ttm_bo_type_device;
|
|
|
|
*bo_ptr = NULL;
|
|
|
|
bo = kzalloc(sizeof(struct qxl_bo), GFP_KERNEL);
|
|
|
|
if (bo == NULL)
|
|
|
|
return -ENOMEM;
|
|
|
|
size = roundup(size, PAGE_SIZE);
|
2017-01-27 09:05:48 +08:00
|
|
|
r = drm_gem_object_init(&qdev->ddev, &bo->gem_base, size);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
if (unlikely(r)) {
|
|
|
|
kfree(bo);
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
bo->type = domain;
|
2013-07-23 12:06:07 +08:00
|
|
|
bo->pin_count = pinned ? 1 : 0;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
bo->surface_id = 0;
|
|
|
|
INIT_LIST_HEAD(&bo->list);
|
2013-07-23 12:16:42 +08:00
|
|
|
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
if (surf)
|
|
|
|
bo->surf = *surf;
|
|
|
|
|
2013-07-23 12:06:07 +08:00
|
|
|
qxl_ttm_placement_from_domain(bo, domain, pinned);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
|
|
|
|
r = ttm_bo_init(&qdev->mman.bdev, &bo->tbo, size, type,
|
|
|
|
&bo->placement, 0, !kernel, NULL, size,
|
2014-01-09 18:03:15 +08:00
|
|
|
NULL, NULL, &qxl_ttm_bo_destroy);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
if (unlikely(r != 0)) {
|
|
|
|
if (r != -ERESTARTSYS)
|
2017-01-27 09:05:48 +08:00
|
|
|
dev_err(qdev->ddev.dev,
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
"object_init failed for (%lu, 0x%08X)\n",
|
|
|
|
size, domain);
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
*bo_ptr = bo;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_bo_kmap(struct qxl_bo *bo, void **ptr)
|
|
|
|
{
|
|
|
|
bool is_iomem;
|
|
|
|
int r;
|
|
|
|
|
|
|
|
if (bo->kptr) {
|
|
|
|
if (ptr)
|
|
|
|
*ptr = bo->kptr;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
r = ttm_bo_kmap(&bo->tbo, 0, bo->tbo.num_pages, &bo->kmap);
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
bo->kptr = ttm_kmap_obj_virtual(&bo->kmap, &is_iomem);
|
|
|
|
if (ptr)
|
|
|
|
*ptr = bo->kptr;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void *qxl_bo_kmap_atomic_page(struct qxl_device *qdev,
|
|
|
|
struct qxl_bo *bo, int page_offset)
|
|
|
|
{
|
|
|
|
struct ttm_mem_type_manager *man = &bo->tbo.bdev->man[bo->tbo.mem.mem_type];
|
|
|
|
void *rptr;
|
|
|
|
int ret;
|
|
|
|
struct io_mapping *map;
|
|
|
|
|
|
|
|
if (bo->tbo.mem.mem_type == TTM_PL_VRAM)
|
|
|
|
map = qdev->vram_mapping;
|
2016-09-12 19:34:37 +08:00
|
|
|
else if (bo->tbo.mem.mem_type == TTM_PL_PRIV)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
map = qdev->surface_mapping;
|
|
|
|
else
|
|
|
|
goto fallback;
|
|
|
|
|
|
|
|
(void) ttm_mem_io_lock(man, false);
|
|
|
|
ret = ttm_mem_io_reserve(bo->tbo.bdev, &bo->tbo.mem);
|
|
|
|
ttm_mem_io_unlock(man);
|
|
|
|
|
|
|
|
return io_mapping_map_atomic_wc(map, bo->tbo.mem.bus.offset + page_offset);
|
|
|
|
fallback:
|
|
|
|
if (bo->kptr) {
|
|
|
|
rptr = bo->kptr + (page_offset * PAGE_SIZE);
|
|
|
|
return rptr;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = qxl_bo_kmap(bo, &rptr);
|
|
|
|
if (ret)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
rptr += page_offset * PAGE_SIZE;
|
|
|
|
return rptr;
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_bo_kunmap(struct qxl_bo *bo)
|
|
|
|
{
|
|
|
|
if (bo->kptr == NULL)
|
|
|
|
return;
|
|
|
|
bo->kptr = NULL;
|
|
|
|
ttm_bo_kunmap(&bo->kmap);
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_bo_kunmap_atomic_page(struct qxl_device *qdev,
|
|
|
|
struct qxl_bo *bo, void *pmap)
|
|
|
|
{
|
|
|
|
struct ttm_mem_type_manager *man = &bo->tbo.bdev->man[bo->tbo.mem.mem_type];
|
|
|
|
struct io_mapping *map;
|
|
|
|
|
|
|
|
if (bo->tbo.mem.mem_type == TTM_PL_VRAM)
|
|
|
|
map = qdev->vram_mapping;
|
2016-09-12 19:34:37 +08:00
|
|
|
else if (bo->tbo.mem.mem_type == TTM_PL_PRIV)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
map = qdev->surface_mapping;
|
|
|
|
else
|
|
|
|
goto fallback;
|
|
|
|
|
|
|
|
io_mapping_unmap_atomic(pmap);
|
|
|
|
|
|
|
|
(void) ttm_mem_io_lock(man, false);
|
|
|
|
ttm_mem_io_free(bo->tbo.bdev, &bo->tbo.mem);
|
|
|
|
ttm_mem_io_unlock(man);
|
|
|
|
return ;
|
|
|
|
fallback:
|
|
|
|
qxl_bo_kunmap(bo);
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_bo_unref(struct qxl_bo **bo)
|
|
|
|
{
|
|
|
|
if ((*bo) == NULL)
|
|
|
|
return;
|
2015-06-03 19:09:17 +08:00
|
|
|
|
|
|
|
drm_gem_object_unreference_unlocked(&(*bo)->gem_base);
|
|
|
|
*bo = NULL;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
struct qxl_bo *qxl_bo_ref(struct qxl_bo *bo)
|
|
|
|
{
|
2015-06-03 19:09:17 +08:00
|
|
|
drm_gem_object_reference(&bo->gem_base);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
return bo;
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_bo_pin(struct qxl_bo *bo, u32 domain, u64 *gpu_addr)
|
|
|
|
{
|
2017-01-27 09:05:46 +08:00
|
|
|
struct drm_device *ddev = bo->gem_base.dev;
|
2013-07-23 12:06:07 +08:00
|
|
|
int r;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
|
|
|
|
if (bo->pin_count) {
|
|
|
|
bo->pin_count++;
|
|
|
|
if (gpu_addr)
|
|
|
|
*gpu_addr = qxl_bo_gpu_offset(bo);
|
|
|
|
return 0;
|
|
|
|
}
|
2013-07-23 12:06:07 +08:00
|
|
|
qxl_ttm_placement_from_domain(bo, domain, true);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
r = ttm_bo_validate(&bo->tbo, &bo->placement, false, false);
|
|
|
|
if (likely(r == 0)) {
|
|
|
|
bo->pin_count = 1;
|
|
|
|
if (gpu_addr != NULL)
|
|
|
|
*gpu_addr = qxl_bo_gpu_offset(bo);
|
|
|
|
}
|
|
|
|
if (unlikely(r != 0))
|
2017-01-27 09:05:46 +08:00
|
|
|
dev_err(ddev->dev, "%p pin failed\n", bo);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_bo_unpin(struct qxl_bo *bo)
|
|
|
|
{
|
2017-01-27 09:05:46 +08:00
|
|
|
struct drm_device *ddev = bo->gem_base.dev;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
int r, i;
|
|
|
|
|
|
|
|
if (!bo->pin_count) {
|
2017-01-27 09:05:46 +08:00
|
|
|
dev_warn(ddev->dev, "%p unpin not necessary\n", bo);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
bo->pin_count--;
|
|
|
|
if (bo->pin_count)
|
|
|
|
return 0;
|
|
|
|
for (i = 0; i < bo->placement.num_placement; i++)
|
2014-08-27 19:16:04 +08:00
|
|
|
bo->placements[i].flags &= ~TTM_PL_FLAG_NO_EVICT;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
r = ttm_bo_validate(&bo->tbo, &bo->placement, false, false);
|
|
|
|
if (unlikely(r != 0))
|
2017-01-27 09:05:46 +08:00
|
|
|
dev_err(ddev->dev, "%p validate failed for unpin\n", bo);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_bo_force_delete(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
struct qxl_bo *bo, *n;
|
|
|
|
|
|
|
|
if (list_empty(&qdev->gem.objects))
|
|
|
|
return;
|
2017-01-27 09:05:48 +08:00
|
|
|
dev_err(qdev->ddev.dev, "Userspace still has active objects !\n");
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
list_for_each_entry_safe(bo, n, &qdev->gem.objects, list) {
|
2017-01-27 09:05:48 +08:00
|
|
|
dev_err(qdev->ddev.dev, "%p %p %lu %lu force free\n",
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
&bo->gem_base, bo, (unsigned long)bo->gem_base.size,
|
|
|
|
*((unsigned long *)&bo->gem_base.refcount));
|
|
|
|
mutex_lock(&qdev->gem.mutex);
|
|
|
|
list_del_init(&bo->list);
|
|
|
|
mutex_unlock(&qdev->gem.mutex);
|
|
|
|
/* this should unref the ttm bo */
|
2015-07-10 05:32:46 +08:00
|
|
|
drm_gem_object_unreference_unlocked(&bo->gem_base);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_bo_init(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
return qxl_ttm_init(qdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
void qxl_bo_fini(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
qxl_ttm_fini(qdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
int qxl_bo_check_id(struct qxl_device *qdev, struct qxl_bo *bo)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
if (bo->type == QXL_GEM_DOMAIN_SURFACE && bo->surface_id == 0) {
|
|
|
|
/* allocate a surface id for this surface now */
|
|
|
|
ret = qxl_surface_id_alloc(qdev, bo);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = qxl_hw_surface_alloc(qdev, bo, NULL);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-07-04 12:59:34 +08:00
|
|
|
int qxl_surf_evict(struct qxl_device *qdev)
|
|
|
|
{
|
2016-09-12 19:34:37 +08:00
|
|
|
return ttm_bo_evict_mm(&qdev->mman.bdev, TTM_PL_PRIV);
|
2013-07-04 12:59:34 +08:00
|
|
|
}
|
2013-07-04 13:02:33 +08:00
|
|
|
|
|
|
|
int qxl_vram_evict(struct qxl_device *qdev)
|
|
|
|
{
|
|
|
|
return ttm_bo_evict_mm(&qdev->mman.bdev, TTM_PL_VRAM);
|
|
|
|
}
|