linux_old1/drivers/net/ppp/ppp_generic.c

3004 lines
70 KiB
C
Raw Normal View History

/*
* Generic PPP layer for Linux.
*
* Copyright 1999-2002 Paul Mackerras.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* The generic PPP layer handles the PPP network interfaces, the
* /dev/ppp device, packet and VJ compression, and multilink.
* It talks to PPP `channels' via the interface defined in
* include/linux/ppp_channel.h. Channels provide the basic means for
* sending and receiving PPP frames on some kind of communications
* channel.
*
* Part of the code in this driver was inspired by the old async-only
* PPP driver, written by Michael Callahan and Al Longyear, and
* subsequently hacked by Paul Mackerras.
*
* ==FILEVERSION 20041108==
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/kmod.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/idr.h>
#include <linux/netdevice.h>
#include <linux/poll.h>
#include <linux/ppp_defs.h>
#include <linux/filter.h>
#include <linux/ppp-ioctl.h>
#include <linux/ppp_channel.h>
#include <linux/ppp-comp.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
#include <linux/if_arp.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/spinlock.h>
#include <linux/rwsem.h>
#include <linux/stddef.h>
#include <linux/device.h>
#include <linux/mutex.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <asm/unaligned.h>
#include <net/slhc_vj.h>
#include <linux/atomic.h>
#include <linux/nsproxy.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#define PPP_VERSION "2.4.2"
/*
* Network protocols we support.
*/
#define NP_IP 0 /* Internet Protocol V4 */
#define NP_IPV6 1 /* Internet Protocol V6 */
#define NP_IPX 2 /* IPX protocol */
#define NP_AT 3 /* Appletalk protocol */
#define NP_MPLS_UC 4 /* MPLS unicast */
#define NP_MPLS_MC 5 /* MPLS multicast */
#define NUM_NP 6 /* Number of NPs. */
#define MPHDRLEN 6 /* multilink protocol header length */
#define MPHDRLEN_SSN 4 /* ditto with short sequence numbers */
/*
* An instance of /dev/ppp can be associated with either a ppp
* interface unit or a ppp channel. In both cases, file->private_data
* points to one of these.
*/
struct ppp_file {
enum {
INTERFACE=1, CHANNEL
} kind;
struct sk_buff_head xq; /* pppd transmit queue */
struct sk_buff_head rq; /* receive queue for pppd */
wait_queue_head_t rwait; /* for poll on reading /dev/ppp */
atomic_t refcnt; /* # refs (incl /dev/ppp attached) */
int hdrlen; /* space to leave for headers */
int index; /* interface unit / channel number */
int dead; /* unit/channel has been shut down */
};
#define PF_TO_X(pf, X) container_of(pf, X, file)
#define PF_TO_PPP(pf) PF_TO_X(pf, struct ppp)
#define PF_TO_CHANNEL(pf) PF_TO_X(pf, struct channel)
/*
* Data structure to hold primary network stats for which
* we want to use 64 bit storage. Other network stats
* are stored in dev->stats of the ppp strucute.
*/
struct ppp_link_stats {
u64 rx_packets;
u64 tx_packets;
u64 rx_bytes;
u64 tx_bytes;
};
/*
* Data structure describing one ppp unit.
* A ppp unit corresponds to a ppp network interface device
* and represents a multilink bundle.
* It can have 0 or more ppp channels connected to it.
*/
struct ppp {
struct ppp_file file; /* stuff for read/write/poll 0 */
struct file *owner; /* file that owns this unit 48 */
struct list_head channels; /* list of attached channels 4c */
int n_channels; /* how many channels are attached 54 */
spinlock_t rlock; /* lock for receive side 58 */
spinlock_t wlock; /* lock for transmit side 5c */
int mru; /* max receive unit 60 */
unsigned int flags; /* control bits 64 */
unsigned int xstate; /* transmit state bits 68 */
unsigned int rstate; /* receive state bits 6c */
int debug; /* debug flags 70 */
struct slcompress *vj; /* state for VJ header compression */
enum NPmode npmode[NUM_NP]; /* what to do with each net proto 78 */
struct sk_buff *xmit_pending; /* a packet ready to go out 88 */
struct compressor *xcomp; /* transmit packet compressor 8c */
void *xc_state; /* its internal state 90 */
struct compressor *rcomp; /* receive decompressor 94 */
void *rc_state; /* its internal state 98 */
unsigned long last_xmit; /* jiffies when last pkt sent 9c */
unsigned long last_recv; /* jiffies when last pkt rcvd a0 */
struct net_device *dev; /* network interface device a4 */
int closing; /* is device closing down? a8 */
#ifdef CONFIG_PPP_MULTILINK
int nxchan; /* next channel to send something on */
u32 nxseq; /* next sequence number to send */
int mrru; /* MP: max reconst. receive unit */
u32 nextseq; /* MP: seq no of next packet */
u32 minseq; /* MP: min of most recent seqnos */
struct sk_buff_head mrq; /* MP: receive reconstruction queue */
#endif /* CONFIG_PPP_MULTILINK */
#ifdef CONFIG_PPP_FILTER
struct sock_filter *pass_filter; /* filter for packets to pass */
struct sock_filter *active_filter;/* filter for pkts to reset idle */
unsigned pass_len, active_len;
#endif /* CONFIG_PPP_FILTER */
struct net *ppp_net; /* the net we belong to */
struct ppp_link_stats stats64; /* 64 bit network stats */
};
/*
* Bits in flags: SC_NO_TCP_CCID, SC_CCP_OPEN, SC_CCP_UP, SC_LOOP_TRAFFIC,
* SC_MULTILINK, SC_MP_SHORTSEQ, SC_MP_XSHORTSEQ, SC_COMP_TCP, SC_REJ_COMP_TCP,
* SC_MUST_COMP
* Bits in rstate: SC_DECOMP_RUN, SC_DC_ERROR, SC_DC_FERROR.
* Bits in xstate: SC_COMP_RUN
*/
#define SC_FLAG_BITS (SC_NO_TCP_CCID|SC_CCP_OPEN|SC_CCP_UP|SC_LOOP_TRAFFIC \
|SC_MULTILINK|SC_MP_SHORTSEQ|SC_MP_XSHORTSEQ \
|SC_COMP_TCP|SC_REJ_COMP_TCP|SC_MUST_COMP)
/*
* Private data structure for each channel.
* This includes the data structure used for multilink.
*/
struct channel {
struct ppp_file file; /* stuff for read/write/poll */
struct list_head list; /* link in all/new_channels list */
struct ppp_channel *chan; /* public channel data structure */
struct rw_semaphore chan_sem; /* protects `chan' during chan ioctl */
spinlock_t downl; /* protects `chan', file.xq dequeue */
struct ppp *ppp; /* ppp unit we're connected to */
struct net *chan_net; /* the net channel belongs to */
struct list_head clist; /* link in list of channels per unit */
rwlock_t upl; /* protects `ppp' */
#ifdef CONFIG_PPP_MULTILINK
u8 avail; /* flag used in multilink stuff */
u8 had_frag; /* >= 1 fragments have been sent */
u32 lastseq; /* MP: last sequence # received */
int speed; /* speed of the corresponding ppp channel*/
#endif /* CONFIG_PPP_MULTILINK */
};
/*
* SMP locking issues:
* Both the ppp.rlock and ppp.wlock locks protect the ppp.channels
* list and the ppp.n_channels field, you need to take both locks
* before you modify them.
* The lock ordering is: channel.upl -> ppp.wlock -> ppp.rlock ->
* channel.downl.
*/
static DEFINE_MUTEX(ppp_mutex);
static atomic_t ppp_unit_count = ATOMIC_INIT(0);
static atomic_t channel_count = ATOMIC_INIT(0);
/* per-net private data for this module */
static int ppp_net_id __read_mostly;
struct ppp_net {
/* units to ppp mapping */
struct idr units_idr;
/*
* all_ppp_mutex protects the units_idr mapping.
* It also ensures that finding a ppp unit in the units_idr
* map and updating its file.refcnt field is atomic.
*/
struct mutex all_ppp_mutex;
/* channels */
struct list_head all_channels;
struct list_head new_channels;
int last_channel_index;
/*
* all_channels_lock protects all_channels and
* last_channel_index, and the atomicity of find
* a channel and updating its file.refcnt field.
*/
spinlock_t all_channels_lock;
};
/* Get the PPP protocol number from a skb */
#define PPP_PROTO(skb) get_unaligned_be16((skb)->data)
/* We limit the length of ppp->file.rq to this (arbitrary) value */
#define PPP_MAX_RQLEN 32
/*
* Maximum number of multilink fragments queued up.
* This has to be large enough to cope with the maximum latency of
* the slowest channel relative to the others. Strictly it should
* depend on the number of channels and their characteristics.
*/
#define PPP_MP_MAX_QLEN 128
/* Multilink header bits. */
#define B 0x80 /* this fragment begins a packet */
#define E 0x40 /* this fragment ends a packet */
/* Compare multilink sequence numbers (assumed to be 32 bits wide) */
#define seq_before(a, b) ((s32)((a) - (b)) < 0)
#define seq_after(a, b) ((s32)((a) - (b)) > 0)
/* Prototypes. */
static int ppp_unattached_ioctl(struct net *net, struct ppp_file *pf,
struct file *file, unsigned int cmd, unsigned long arg);
static void ppp_xmit_process(struct ppp *ppp);
static void ppp_send_frame(struct ppp *ppp, struct sk_buff *skb);
static void ppp_push(struct ppp *ppp);
static void ppp_channel_push(struct channel *pch);
static void ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb,
struct channel *pch);
static void ppp_receive_error(struct ppp *ppp);
static void ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb);
static struct sk_buff *ppp_decompress_frame(struct ppp *ppp,
struct sk_buff *skb);
#ifdef CONFIG_PPP_MULTILINK
static void ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb,
struct channel *pch);
static void ppp_mp_insert(struct ppp *ppp, struct sk_buff *skb);
static struct sk_buff *ppp_mp_reconstruct(struct ppp *ppp);
static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb);
#endif /* CONFIG_PPP_MULTILINK */
static int ppp_set_compress(struct ppp *ppp, unsigned long arg);
static void ppp_ccp_peek(struct ppp *ppp, struct sk_buff *skb, int inbound);
static void ppp_ccp_closed(struct ppp *ppp);
static struct compressor *find_compressor(int type);
static void ppp_get_stats(struct ppp *ppp, struct ppp_stats *st);
static struct ppp *ppp_create_interface(struct net *net, int unit, int *retp);
static void init_ppp_file(struct ppp_file *pf, int kind);
static void ppp_shutdown_interface(struct ppp *ppp);
static void ppp_destroy_interface(struct ppp *ppp);
static struct ppp *ppp_find_unit(struct ppp_net *pn, int unit);
static struct channel *ppp_find_channel(struct ppp_net *pn, int unit);
static int ppp_connect_channel(struct channel *pch, int unit);
static int ppp_disconnect_channel(struct channel *pch);
static void ppp_destroy_channel(struct channel *pch);
static int unit_get(struct idr *p, void *ptr);
static int unit_set(struct idr *p, void *ptr, int n);
static void unit_put(struct idr *p, int n);
static void *unit_find(struct idr *p, int n);
static struct class *ppp_class;
/* per net-namespace data */
static inline struct ppp_net *ppp_pernet(struct net *net)
{
BUG_ON(!net);
return net_generic(net, ppp_net_id);
}
/* Translates a PPP protocol number to a NP index (NP == network protocol) */
static inline int proto_to_npindex(int proto)
{
switch (proto) {
case PPP_IP:
return NP_IP;
case PPP_IPV6:
return NP_IPV6;
case PPP_IPX:
return NP_IPX;
case PPP_AT:
return NP_AT;
case PPP_MPLS_UC:
return NP_MPLS_UC;
case PPP_MPLS_MC:
return NP_MPLS_MC;
}
return -EINVAL;
}
/* Translates an NP index into a PPP protocol number */
static const int npindex_to_proto[NUM_NP] = {
PPP_IP,
PPP_IPV6,
PPP_IPX,
PPP_AT,
PPP_MPLS_UC,
PPP_MPLS_MC,
};
/* Translates an ethertype into an NP index */
static inline int ethertype_to_npindex(int ethertype)
{
switch (ethertype) {
case ETH_P_IP:
return NP_IP;
case ETH_P_IPV6:
return NP_IPV6;
case ETH_P_IPX:
return NP_IPX;
case ETH_P_PPPTALK:
case ETH_P_ATALK:
return NP_AT;
case ETH_P_MPLS_UC:
return NP_MPLS_UC;
case ETH_P_MPLS_MC:
return NP_MPLS_MC;
}
return -1;
}
/* Translates an NP index into an ethertype */
static const int npindex_to_ethertype[NUM_NP] = {
ETH_P_IP,
ETH_P_IPV6,
ETH_P_IPX,
ETH_P_PPPTALK,
ETH_P_MPLS_UC,
ETH_P_MPLS_MC,
};
/*
* Locking shorthand.
*/
#define ppp_xmit_lock(ppp) spin_lock_bh(&(ppp)->wlock)
#define ppp_xmit_unlock(ppp) spin_unlock_bh(&(ppp)->wlock)
#define ppp_recv_lock(ppp) spin_lock_bh(&(ppp)->rlock)
#define ppp_recv_unlock(ppp) spin_unlock_bh(&(ppp)->rlock)
#define ppp_lock(ppp) do { ppp_xmit_lock(ppp); \
ppp_recv_lock(ppp); } while (0)
#define ppp_unlock(ppp) do { ppp_recv_unlock(ppp); \
ppp_xmit_unlock(ppp); } while (0)
/*
* /dev/ppp device routines.
* The /dev/ppp device is used by pppd to control the ppp unit.
* It supports the read, write, ioctl and poll functions.
* Open instances of /dev/ppp can be in one of three states:
* unattached, attached to a ppp unit, or attached to a ppp channel.
*/
static int ppp_open(struct inode *inode, struct file *file)
{
/*
* This could (should?) be enforced by the permissions on /dev/ppp.
*/
if (!capable(CAP_NET_ADMIN))
return -EPERM;
return 0;
}
static int ppp_release(struct inode *unused, struct file *file)
{
struct ppp_file *pf = file->private_data;
struct ppp *ppp;
if (pf) {
file->private_data = NULL;
if (pf->kind == INTERFACE) {
ppp = PF_TO_PPP(pf);
if (file == ppp->owner)
ppp_shutdown_interface(ppp);
}
if (atomic_dec_and_test(&pf->refcnt)) {
switch (pf->kind) {
case INTERFACE:
ppp_destroy_interface(PF_TO_PPP(pf));
break;
case CHANNEL:
ppp_destroy_channel(PF_TO_CHANNEL(pf));
break;
}
}
}
return 0;
}
static ssize_t ppp_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct ppp_file *pf = file->private_data;
DECLARE_WAITQUEUE(wait, current);
ssize_t ret;
struct sk_buff *skb = NULL;
struct iovec iov;
ret = count;
if (!pf)
return -ENXIO;
add_wait_queue(&pf->rwait, &wait);
for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
skb = skb_dequeue(&pf->rq);
if (skb)
break;
ret = 0;
if (pf->dead)
break;
if (pf->kind == INTERFACE) {
/*
* Return 0 (EOF) on an interface that has no
* channels connected, unless it is looping
* network traffic (demand mode).
*/
struct ppp *ppp = PF_TO_PPP(pf);
if (ppp->n_channels == 0 &&
(ppp->flags & SC_LOOP_TRAFFIC) == 0)
break;
}
ret = -EAGAIN;
if (file->f_flags & O_NONBLOCK)
break;
ret = -ERESTARTSYS;
if (signal_pending(current))
break;
schedule();
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&pf->rwait, &wait);
if (!skb)
goto out;
ret = -EOVERFLOW;
if (skb->len > count)
goto outf;
ret = -EFAULT;
iov.iov_base = buf;
iov.iov_len = count;
if (skb_copy_datagram_iovec(skb, 0, &iov, skb->len))
goto outf;
ret = skb->len;
outf:
kfree_skb(skb);
out:
return ret;
}
static ssize_t ppp_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
struct ppp_file *pf = file->private_data;
struct sk_buff *skb;
ssize_t ret;
if (!pf)
return -ENXIO;
ret = -ENOMEM;
skb = alloc_skb(count + pf->hdrlen, GFP_KERNEL);
if (!skb)
goto out;
skb_reserve(skb, pf->hdrlen);
ret = -EFAULT;
if (copy_from_user(skb_put(skb, count), buf, count)) {
kfree_skb(skb);
goto out;
}
skb_queue_tail(&pf->xq, skb);
switch (pf->kind) {
case INTERFACE:
ppp_xmit_process(PF_TO_PPP(pf));
break;
case CHANNEL:
ppp_channel_push(PF_TO_CHANNEL(pf));
break;
}
ret = count;
out:
return ret;
}
/* No kernel lock - fine */
static unsigned int ppp_poll(struct file *file, poll_table *wait)
{
struct ppp_file *pf = file->private_data;
unsigned int mask;
if (!pf)
return 0;
poll_wait(file, &pf->rwait, wait);
mask = POLLOUT | POLLWRNORM;
if (skb_peek(&pf->rq))
mask |= POLLIN | POLLRDNORM;
if (pf->dead)
mask |= POLLHUP;
else if (pf->kind == INTERFACE) {
/* see comment in ppp_read */
struct ppp *ppp = PF_TO_PPP(pf);
if (ppp->n_channels == 0 &&
(ppp->flags & SC_LOOP_TRAFFIC) == 0)
mask |= POLLIN | POLLRDNORM;
}
return mask;
}
#ifdef CONFIG_PPP_FILTER
static int get_filter(void __user *arg, struct sock_filter **p)
{
struct sock_fprog uprog;
struct sock_filter *code = NULL;
int len, err;
if (copy_from_user(&uprog, arg, sizeof(uprog)))
return -EFAULT;
if (!uprog.len) {
*p = NULL;
return 0;
}
len = uprog.len * sizeof(struct sock_filter);
code = memdup_user(uprog.filter, len);
if (IS_ERR(code))
return PTR_ERR(code);
err = sk_chk_filter(code, uprog.len);
if (err) {
kfree(code);
return err;
}
*p = code;
return uprog.len;
}
#endif /* CONFIG_PPP_FILTER */
static long ppp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct ppp_file *pf = file->private_data;
struct ppp *ppp;
int err = -EFAULT, val, val2, i;
struct ppp_idle idle;
struct npioctl npi;
int unit, cflags;
struct slcompress *vj;
void __user *argp = (void __user *)arg;
int __user *p = argp;
if (!pf)
return ppp_unattached_ioctl(current->nsproxy->net_ns,
pf, file, cmd, arg);
if (cmd == PPPIOCDETACH) {
/*
* We have to be careful here... if the file descriptor
* has been dup'd, we could have another process in the
* middle of a poll using the same file *, so we had
* better not free the interface data structures -
* instead we fail the ioctl. Even in this case, we
* shut down the interface if we are the owner of it.
* Actually, we should get rid of PPPIOCDETACH, userland
* (i.e. pppd) could achieve the same effect by closing
* this fd and reopening /dev/ppp.
*/
err = -EINVAL;
mutex_lock(&ppp_mutex);
if (pf->kind == INTERFACE) {
ppp = PF_TO_PPP(pf);
if (file == ppp->owner)
ppp_shutdown_interface(ppp);
}
if (atomic_long_read(&file->f_count) <= 2) {
ppp_release(NULL, file);
err = 0;
} else
pr_warn("PPPIOCDETACH file->f_count=%ld\n",
atomic_long_read(&file->f_count));
mutex_unlock(&ppp_mutex);
return err;
}
if (pf->kind == CHANNEL) {
struct channel *pch;
struct ppp_channel *chan;
mutex_lock(&ppp_mutex);
pch = PF_TO_CHANNEL(pf);
switch (cmd) {
case PPPIOCCONNECT:
if (get_user(unit, p))
break;
err = ppp_connect_channel(pch, unit);
break;
case PPPIOCDISCONN:
err = ppp_disconnect_channel(pch);
break;
default:
down_read(&pch->chan_sem);
chan = pch->chan;
err = -ENOTTY;
if (chan && chan->ops->ioctl)
err = chan->ops->ioctl(chan, cmd, arg);
up_read(&pch->chan_sem);
}
mutex_unlock(&ppp_mutex);
return err;
}
if (pf->kind != INTERFACE) {
/* can't happen */
pr_err("PPP: not interface or channel??\n");
return -EINVAL;
}
mutex_lock(&ppp_mutex);
ppp = PF_TO_PPP(pf);
switch (cmd) {
case PPPIOCSMRU:
if (get_user(val, p))
break;
ppp->mru = val;
err = 0;
break;
case PPPIOCSFLAGS:
if (get_user(val, p))
break;
ppp_lock(ppp);
cflags = ppp->flags & ~val;
ppp->flags = val & SC_FLAG_BITS;
ppp_unlock(ppp);
if (cflags & SC_CCP_OPEN)
ppp_ccp_closed(ppp);
err = 0;
break;
case PPPIOCGFLAGS:
val = ppp->flags | ppp->xstate | ppp->rstate;
if (put_user(val, p))
break;
err = 0;
break;
case PPPIOCSCOMPRESS:
err = ppp_set_compress(ppp, arg);
break;
case PPPIOCGUNIT:
if (put_user(ppp->file.index, p))
break;
err = 0;
break;
case PPPIOCSDEBUG:
if (get_user(val, p))
break;
ppp->debug = val;
err = 0;
break;
case PPPIOCGDEBUG:
if (put_user(ppp->debug, p))
break;
err = 0;
break;
case PPPIOCGIDLE:
idle.xmit_idle = (jiffies - ppp->last_xmit) / HZ;
idle.recv_idle = (jiffies - ppp->last_recv) / HZ;
if (copy_to_user(argp, &idle, sizeof(idle)))
break;
err = 0;
break;
case PPPIOCSMAXCID:
if (get_user(val, p))
break;
val2 = 15;
if ((val >> 16) != 0) {
val2 = val >> 16;
val &= 0xffff;
}
vj = slhc_init(val2+1, val+1);
if (!vj) {
netdev_err(ppp->dev,
"PPP: no memory (VJ compressor)\n");
err = -ENOMEM;
break;
}
ppp_lock(ppp);
if (ppp->vj)
slhc_free(ppp->vj);
ppp->vj = vj;
ppp_unlock(ppp);
err = 0;
break;
case PPPIOCGNPMODE:
case PPPIOCSNPMODE:
if (copy_from_user(&npi, argp, sizeof(npi)))
break;
err = proto_to_npindex(npi.protocol);
if (err < 0)
break;
i = err;
if (cmd == PPPIOCGNPMODE) {
err = -EFAULT;
npi.mode = ppp->npmode[i];
if (copy_to_user(argp, &npi, sizeof(npi)))
break;
} else {
ppp->npmode[i] = npi.mode;
/* we may be able to transmit more packets now (??) */
netif_wake_queue(ppp->dev);
}
err = 0;
break;
#ifdef CONFIG_PPP_FILTER
case PPPIOCSPASS:
{
struct sock_filter *code;
err = get_filter(argp, &code);
if (err >= 0) {
ppp_lock(ppp);
kfree(ppp->pass_filter);
ppp->pass_filter = code;
ppp->pass_len = err;
ppp_unlock(ppp);
err = 0;
}
break;
}
case PPPIOCSACTIVE:
{
struct sock_filter *code;
err = get_filter(argp, &code);
if (err >= 0) {
ppp_lock(ppp);
kfree(ppp->active_filter);
ppp->active_filter = code;
ppp->active_len = err;
ppp_unlock(ppp);
err = 0;
}
break;
}
#endif /* CONFIG_PPP_FILTER */
#ifdef CONFIG_PPP_MULTILINK
case PPPIOCSMRRU:
if (get_user(val, p))
break;
ppp_recv_lock(ppp);
ppp->mrru = val;
ppp_recv_unlock(ppp);
err = 0;
break;
#endif /* CONFIG_PPP_MULTILINK */
default:
err = -ENOTTY;
}
mutex_unlock(&ppp_mutex);
return err;
}
static int ppp_unattached_ioctl(struct net *net, struct ppp_file *pf,
struct file *file, unsigned int cmd, unsigned long arg)
{
int unit, err = -EFAULT;
struct ppp *ppp;
struct channel *chan;
struct ppp_net *pn;
int __user *p = (int __user *)arg;
mutex_lock(&ppp_mutex);
switch (cmd) {
case PPPIOCNEWUNIT:
/* Create a new ppp unit */
if (get_user(unit, p))
break;
ppp = ppp_create_interface(net, unit, &err);
if (!ppp)
break;
file->private_data = &ppp->file;
ppp->owner = file;
err = -EFAULT;
if (put_user(ppp->file.index, p))
break;
err = 0;
break;
case PPPIOCATTACH:
/* Attach to an existing ppp unit */
if (get_user(unit, p))
break;
err = -ENXIO;
pn = ppp_pernet(net);
mutex_lock(&pn->all_ppp_mutex);
ppp = ppp_find_unit(pn, unit);
if (ppp) {
atomic_inc(&ppp->file.refcnt);
file->private_data = &ppp->file;
err = 0;
}
mutex_unlock(&pn->all_ppp_mutex);
break;
case PPPIOCATTCHAN:
if (get_user(unit, p))
break;
err = -ENXIO;
pn = ppp_pernet(net);
spin_lock_bh(&pn->all_channels_lock);
chan = ppp_find_channel(pn, unit);
if (chan) {
atomic_inc(&chan->file.refcnt);
file->private_data = &chan->file;
err = 0;
}
spin_unlock_bh(&pn->all_channels_lock);
break;
default:
err = -ENOTTY;
}
mutex_unlock(&ppp_mutex);
return err;
}
static const struct file_operations ppp_device_fops = {
.owner = THIS_MODULE,
.read = ppp_read,
.write = ppp_write,
.poll = ppp_poll,
.unlocked_ioctl = ppp_ioctl,
.open = ppp_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.release = ppp_release,
.llseek = noop_llseek,
};
static __net_init int ppp_init_net(struct net *net)
{
struct ppp_net *pn = net_generic(net, ppp_net_id);
idr_init(&pn->units_idr);
mutex_init(&pn->all_ppp_mutex);
INIT_LIST_HEAD(&pn->all_channels);
INIT_LIST_HEAD(&pn->new_channels);
spin_lock_init(&pn->all_channels_lock);
return 0;
}
static __net_exit void ppp_exit_net(struct net *net)
{
struct ppp_net *pn = net_generic(net, ppp_net_id);
idr_destroy(&pn->units_idr);
}
static struct pernet_operations ppp_net_ops = {
.init = ppp_init_net,
.exit = ppp_exit_net,
.id = &ppp_net_id,
.size = sizeof(struct ppp_net),
};
#define PPP_MAJOR 108
/* Called at boot time if ppp is compiled into the kernel,
or at module load time (from init_module) if compiled as a module. */
static int __init ppp_init(void)
{
int err;
pr_info("PPP generic driver version " PPP_VERSION "\n");
err = register_pernet_device(&ppp_net_ops);
if (err) {
pr_err("failed to register PPP pernet device (%d)\n", err);
goto out;
}
err = register_chrdev(PPP_MAJOR, "ppp", &ppp_device_fops);
if (err) {
pr_err("failed to register PPP device (%d)\n", err);
goto out_net;
}
ppp_class = class_create(THIS_MODULE, "ppp");
if (IS_ERR(ppp_class)) {
err = PTR_ERR(ppp_class);
goto out_chrdev;
}
/* not a big deal if we fail here :-) */
device_create(ppp_class, NULL, MKDEV(PPP_MAJOR, 0), NULL, "ppp");
return 0;
out_chrdev:
unregister_chrdev(PPP_MAJOR, "ppp");
out_net:
unregister_pernet_device(&ppp_net_ops);
out:
return err;
}
/*
* Network interface unit routines.
*/
static netdev_tx_t
ppp_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ppp *ppp = netdev_priv(dev);
int npi, proto;
unsigned char *pp;
npi = ethertype_to_npindex(ntohs(skb->protocol));
if (npi < 0)
goto outf;
/* Drop, accept or reject the packet */
switch (ppp->npmode[npi]) {
case NPMODE_PASS:
break;
case NPMODE_QUEUE:
/* it would be nice to have a way to tell the network
system to queue this one up for later. */
goto outf;
case NPMODE_DROP:
case NPMODE_ERROR:
goto outf;
}
/* Put the 2-byte PPP protocol number on the front,
making sure there is room for the address and control fields. */
if (skb_cow_head(skb, PPP_HDRLEN))
goto outf;
pp = skb_push(skb, 2);
proto = npindex_to_proto[npi];
put_unaligned_be16(proto, pp);
skb_queue_tail(&ppp->file.xq, skb);
ppp_xmit_process(ppp);
return NETDEV_TX_OK;
outf:
kfree_skb(skb);
++dev->stats.tx_dropped;
return NETDEV_TX_OK;
}
static int
ppp_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct ppp *ppp = netdev_priv(dev);
int err = -EFAULT;
void __user *addr = (void __user *) ifr->ifr_ifru.ifru_data;
struct ppp_stats stats;
struct ppp_comp_stats cstats;
char *vers;
switch (cmd) {
case SIOCGPPPSTATS:
ppp_get_stats(ppp, &stats);
if (copy_to_user(addr, &stats, sizeof(stats)))
break;
err = 0;
break;
case SIOCGPPPCSTATS:
memset(&cstats, 0, sizeof(cstats));
if (ppp->xc_state)
ppp->xcomp->comp_stat(ppp->xc_state, &cstats.c);
if (ppp->rc_state)
ppp->rcomp->decomp_stat(ppp->rc_state, &cstats.d);
if (copy_to_user(addr, &cstats, sizeof(cstats)))
break;
err = 0;
break;
case SIOCGPPPVER:
vers = PPP_VERSION;
if (copy_to_user(addr, vers, strlen(vers) + 1))
break;
err = 0;
break;
default:
err = -EINVAL;
}
return err;
}
static struct rtnl_link_stats64*
ppp_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats64)
{
struct ppp *ppp = netdev_priv(dev);
ppp_recv_lock(ppp);
stats64->rx_packets = ppp->stats64.rx_packets;
stats64->rx_bytes = ppp->stats64.rx_bytes;
ppp_recv_unlock(ppp);
ppp_xmit_lock(ppp);
stats64->tx_packets = ppp->stats64.tx_packets;
stats64->tx_bytes = ppp->stats64.tx_bytes;
ppp_xmit_unlock(ppp);
stats64->rx_errors = dev->stats.rx_errors;
stats64->tx_errors = dev->stats.tx_errors;
stats64->rx_dropped = dev->stats.rx_dropped;
stats64->tx_dropped = dev->stats.tx_dropped;
stats64->rx_length_errors = dev->stats.rx_length_errors;
return stats64;
}
static struct lock_class_key ppp_tx_busylock;
static int ppp_dev_init(struct net_device *dev)
{
dev->qdisc_tx_busylock = &ppp_tx_busylock;
return 0;
}
static const struct net_device_ops ppp_netdev_ops = {
.ndo_init = ppp_dev_init,
.ndo_start_xmit = ppp_start_xmit,
.ndo_do_ioctl = ppp_net_ioctl,
.ndo_get_stats64 = ppp_get_stats64,
};
static void ppp_setup(struct net_device *dev)
{
dev->netdev_ops = &ppp_netdev_ops;
dev->hard_header_len = PPP_HDRLEN;
dev->mtu = PPP_MRU;
dev->addr_len = 0;
dev->tx_queue_len = 3;
dev->type = ARPHRD_PPP;
dev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
dev->features |= NETIF_F_NETNS_LOCAL;
dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
}
/*
* Transmit-side routines.
*/
/*
* Called to do any work queued up on the transmit side
* that can now be done.
*/
static void
ppp_xmit_process(struct ppp *ppp)
{
struct sk_buff *skb;
ppp_xmit_lock(ppp);
if (!ppp->closing) {
ppp_push(ppp);
while (!ppp->xmit_pending &&
(skb = skb_dequeue(&ppp->file.xq)))
ppp_send_frame(ppp, skb);
/* If there's no work left to do, tell the core net
code that we can accept some more. */
if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq))
netif_wake_queue(ppp->dev);
else
netif_stop_queue(ppp->dev);
}
ppp_xmit_unlock(ppp);
}
static inline struct sk_buff *
pad_compress_skb(struct ppp *ppp, struct sk_buff *skb)
{
struct sk_buff *new_skb;
int len;
int new_skb_size = ppp->dev->mtu +
ppp->xcomp->comp_extra + ppp->dev->hard_header_len;
int compressor_skb_size = ppp->dev->mtu +
ppp->xcomp->comp_extra + PPP_HDRLEN;
new_skb = alloc_skb(new_skb_size, GFP_ATOMIC);
if (!new_skb) {
if (net_ratelimit())
netdev_err(ppp->dev, "PPP: no memory (comp pkt)\n");
return NULL;
}
if (ppp->dev->hard_header_len > PPP_HDRLEN)
skb_reserve(new_skb,
ppp->dev->hard_header_len - PPP_HDRLEN);
/* compressor still expects A/C bytes in hdr */
len = ppp->xcomp->compress(ppp->xc_state, skb->data - 2,
new_skb->data, skb->len + 2,
compressor_skb_size);
if (len > 0 && (ppp->flags & SC_CCP_UP)) {
consume_skb(skb);
skb = new_skb;
skb_put(skb, len);
skb_pull(skb, 2); /* pull off A/C bytes */
} else if (len == 0) {
/* didn't compress, or CCP not up yet */
consume_skb(new_skb);
new_skb = skb;
} else {
/*
* (len < 0)
* MPPE requires that we do not send unencrypted
* frames. The compressor will return -1 if we
* should drop the frame. We cannot simply test
* the compress_proto because MPPE and MPPC share
* the same number.
*/
if (net_ratelimit())
netdev_err(ppp->dev, "ppp: compressor dropped pkt\n");
kfree_skb(skb);
consume_skb(new_skb);
new_skb = NULL;
}
return new_skb;
}
/*
* Compress and send a frame.
* The caller should have locked the xmit path,
* and xmit_pending should be 0.
*/
static void
ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
{
int proto = PPP_PROTO(skb);
struct sk_buff *new_skb;
int len;
unsigned char *cp;
if (proto < 0x8000) {
#ifdef CONFIG_PPP_FILTER
/* check if we should pass this packet */
/* the filter instructions are constructed assuming
a four-byte PPP header on each packet */
*skb_push(skb, 2) = 1;
if (ppp->pass_filter &&
sk_run_filter(skb, ppp->pass_filter) == 0) {
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
"PPP: outbound frame "
"not passed\n");
kfree_skb(skb);
return;
}
/* if this packet passes the active filter, record the time */
if (!(ppp->active_filter &&
sk_run_filter(skb, ppp->active_filter) == 0))
ppp->last_xmit = jiffies;
skb_pull(skb, 2);
#else
/* for data packets, record the time */
ppp->last_xmit = jiffies;
#endif /* CONFIG_PPP_FILTER */
}
++ppp->stats64.tx_packets;
ppp->stats64.tx_bytes += skb->len - 2;
switch (proto) {
case PPP_IP:
if (!ppp->vj || (ppp->flags & SC_COMP_TCP) == 0)
break;
/* try to do VJ TCP header compression */
new_skb = alloc_skb(skb->len + ppp->dev->hard_header_len - 2,
GFP_ATOMIC);
if (!new_skb) {
netdev_err(ppp->dev, "PPP: no memory (VJ comp pkt)\n");
goto drop;
}
skb_reserve(new_skb, ppp->dev->hard_header_len - 2);
cp = skb->data + 2;
len = slhc_compress(ppp->vj, cp, skb->len - 2,
new_skb->data + 2, &cp,
!(ppp->flags & SC_NO_TCP_CCID));
if (cp == skb->data + 2) {
/* didn't compress */
consume_skb(new_skb);
} else {
if (cp[0] & SL_TYPE_COMPRESSED_TCP) {
proto = PPP_VJC_COMP;
cp[0] &= ~SL_TYPE_COMPRESSED_TCP;
} else {
proto = PPP_VJC_UNCOMP;
cp[0] = skb->data[2];
}
consume_skb(skb);
skb = new_skb;
cp = skb_put(skb, len + 2);
cp[0] = 0;
cp[1] = proto;
}
break;
case PPP_CCP:
/* peek at outbound CCP frames */
ppp_ccp_peek(ppp, skb, 0);
break;
}
/* try to do packet compression */
if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state &&
proto != PPP_LCP && proto != PPP_CCP) {
if (!(ppp->flags & SC_CCP_UP) && (ppp->flags & SC_MUST_COMP)) {
if (net_ratelimit())
netdev_err(ppp->dev,
"ppp: compression required but "
"down - pkt dropped.\n");
goto drop;
}
skb = pad_compress_skb(ppp, skb);
if (!skb)
goto drop;
}
/*
* If we are waiting for traffic (demand dialling),
* queue it up for pppd to receive.
*/
if (ppp->flags & SC_LOOP_TRAFFIC) {
if (ppp->file.rq.qlen > PPP_MAX_RQLEN)
goto drop;
skb_queue_tail(&ppp->file.rq, skb);
wake_up_interruptible(&ppp->file.rwait);
return;
}
ppp->xmit_pending = skb;
ppp_push(ppp);
return;
drop:
kfree_skb(skb);
++ppp->dev->stats.tx_errors;
}
/*
* Try to send the frame in xmit_pending.
* The caller should have the xmit path locked.
*/
static void
ppp_push(struct ppp *ppp)
{
struct list_head *list;
struct channel *pch;
struct sk_buff *skb = ppp->xmit_pending;
if (!skb)
return;
list = &ppp->channels;
if (list_empty(list)) {
/* nowhere to send the packet, just drop it */
ppp->xmit_pending = NULL;
kfree_skb(skb);
return;
}
if ((ppp->flags & SC_MULTILINK) == 0) {
/* not doing multilink: send it down the first channel */
list = list->next;
pch = list_entry(list, struct channel, clist);
spin_lock_bh(&pch->downl);
if (pch->chan) {
if (pch->chan->ops->start_xmit(pch->chan, skb))
ppp->xmit_pending = NULL;
} else {
/* channel got unregistered */
kfree_skb(skb);
ppp->xmit_pending = NULL;
}
spin_unlock_bh(&pch->downl);
return;
}
#ifdef CONFIG_PPP_MULTILINK
/* Multilink: fragment the packet over as many links
as can take the packet at the moment. */
if (!ppp_mp_explode(ppp, skb))
return;
#endif /* CONFIG_PPP_MULTILINK */
ppp->xmit_pending = NULL;
kfree_skb(skb);
}
#ifdef CONFIG_PPP_MULTILINK
static bool mp_protocol_compress __read_mostly = true;
module_param(mp_protocol_compress, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(mp_protocol_compress,
"compress protocol id in multilink fragments");
/*
* Divide a packet to be transmitted into fragments and
* send them out the individual links.
*/
static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
{
int len, totlen;
int i, bits, hdrlen, mtu;
int flen;
int navail, nfree, nzero;
int nbigger;
int totspeed;
int totfree;
unsigned char *p, *q;
struct list_head *list;
struct channel *pch;
struct sk_buff *frag;
struct ppp_channel *chan;
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
totspeed = 0; /*total bitrate of the bundle*/
nfree = 0; /* # channels which have no packet already queued */
navail = 0; /* total # of usable channels (not deregistered) */
nzero = 0; /* number of channels with zero speed associated*/
totfree = 0; /*total # of channels available and
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
*having no queued packets before
*starting the fragmentation*/
hdrlen = (ppp->flags & SC_MP_XSHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN;
i = 0;
list_for_each_entry(pch, &ppp->channels, clist) {
if (pch->chan) {
pch->avail = 1;
navail++;
pch->speed = pch->chan->speed;
} else {
pch->avail = 0;
}
if (pch->avail) {
if (skb_queue_empty(&pch->file.xq) ||
!pch->had_frag) {
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
if (pch->speed == 0)
nzero++;
else
totspeed += pch->speed;
pch->avail = 2;
++nfree;
++totfree;
}
if (!pch->had_frag && i < ppp->nxchan)
ppp->nxchan = i;
}
++i;
}
/*
* Don't start sending this packet unless at least half of
* the channels are free. This gives much better TCP
* performance if we have a lot of channels.
*/
if (nfree == 0 || nfree < navail / 2)
return 0; /* can't take now, leave it in xmit_pending */
/* Do protocol field compression */
p = skb->data;
len = skb->len;
if (*p == 0 && mp_protocol_compress) {
++p;
--len;
}
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
totlen = len;
nbigger = len % nfree;
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
/* skip to the channel after the one we last used
and start at that one */
list = &ppp->channels;
for (i = 0; i < ppp->nxchan; ++i) {
list = list->next;
if (list == &ppp->channels) {
i = 0;
break;
}
}
/* create a fragment for each channel */
bits = B;
while (len > 0) {
list = list->next;
if (list == &ppp->channels) {
i = 0;
continue;
}
pch = list_entry(list, struct channel, clist);
++i;
if (!pch->avail)
continue;
/*
* Skip this channel if it has a fragment pending already and
* we haven't given a fragment to all of the free channels.
*/
if (pch->avail == 1) {
if (nfree > 0)
continue;
} else {
pch->avail = 1;
}
/* check the channel's mtu and whether it is still attached. */
spin_lock_bh(&pch->downl);
if (pch->chan == NULL) {
/* can't use this channel, it's being deregistered */
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
if (pch->speed == 0)
nzero--;
else
totspeed -= pch->speed;
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
spin_unlock_bh(&pch->downl);
pch->avail = 0;
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
totlen = len;
totfree--;
nfree--;
if (--navail == 0)
break;
continue;
}
/*
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
*if the channel speed is not set divide
*the packet evenly among the free channels;
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
*otherwise divide it according to the speed
*of the channel we are going to transmit on
*/
flen = len;
if (nfree > 0) {
if (pch->speed == 0) {
flen = len/nfree;
if (nbigger > 0) {
flen++;
nbigger--;
}
} else {
flen = (((totfree - nzero)*(totlen + hdrlen*totfree)) /
((totspeed*totfree)/pch->speed)) - hdrlen;
if (nbigger > 0) {
flen += ((totfree - nzero)*pch->speed)/totspeed;
nbigger -= ((totfree - nzero)*pch->speed)/
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
totspeed;
}
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
}
nfree--;
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
}
/*
*check if we are on the last channel or
*we exceded the length of the data to
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
*fragment
*/
if ((nfree <= 0) || (flen > len))
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
flen = len;
/*
*it is not worth to tx on slow channels:
*in that case from the resulting flen according to the
*above formula will be equal or less than zero.
*Skip the channel in this case
*/
if (flen <= 0) {
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
pch->avail = 2;
spin_unlock_bh(&pch->downl);
continue;
}
/*
* hdrlen includes the 2-byte PPP protocol field, but the
* MTU counts only the payload excluding the protocol field.
* (RFC1661 Section 2)
*/
mtu = pch->chan->mtu - (hdrlen - 2);
if (mtu < 4)
mtu = 4;
if (flen > mtu)
flen = mtu;
if (flen == len)
bits |= E;
frag = alloc_skb(flen + hdrlen + (flen == 0), GFP_ATOMIC);
if (!frag)
goto noskb;
q = skb_put(frag, flen + hdrlen);
/* make the MP header */
put_unaligned_be16(PPP_MP, q);
if (ppp->flags & SC_MP_XSHORTSEQ) {
q[2] = bits + ((ppp->nxseq >> 8) & 0xf);
q[3] = ppp->nxseq;
} else {
q[2] = bits;
q[3] = ppp->nxseq >> 16;
q[4] = ppp->nxseq >> 8;
q[5] = ppp->nxseq;
}
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
memcpy(q + hdrlen, p, flen);
/* try to send it down the channel */
chan = pch->chan;
if (!skb_queue_empty(&pch->file.xq) ||
ppp: ppp_mp_explode() redesign I found the PPP subsystem to not work properly when connecting channels with different speeds to the same bundle. Problem Description: As the "ppp_mp_explode" function fragments the sk_buff buffer evenly among the PPP channels that are connected to a certain PPP unit to make up a bundle, if we are transmitting using an upper layer protocol that requires an Ack before sending the next packet (like TCP/IP for example), we will have a bandwidth bottleneck on the slowest channel of the bundle. Let's clarify by an example. Let's consider a scenario where we have two PPP links making up a bundle: a slow link (10KB/sec) and a fast link (1000KB/sec) working at the best (full bandwidth). On the top we have a TCP/IP stack sending a 1000 Bytes sk_buff buffer down to the PPP subsystem. The "ppp_mp_explode" function will divide the buffer in two fragments of 500B each (we are neglecting all the headers, crc, flags etc?.). Before the TCP/IP stack sends out the next buffer, it will have to wait for the ACK response from the remote peer, so it will have to wait for both fragments to have been sent over the two PPP links, received by the remote peer and reconstructed. The resulting behaviour is that, rather than having a bundle working @1010KB/sec (the sum of the channels bandwidths), we'll have a bundle working @20KB/sec (the double of the slowest channels bandwidth). Problem Solution: The problem has been solved by redesigning the "ppp_mp_explode" function in such a way to make it split the sk_buff buffer according to the speeds of the underlying PPP channels (the speeds of the serial interfaces respectively attached to the PPP channels). Referring to the above example, the redesigned "ppp_mp_explode" function will now divide the 1000 Bytes buffer into two fragments whose sizes are set according to the speeds of the channels where they are going to be sent on (e.g . 10 Byets on 10KB/sec channel and 990 Bytes on 1000KB/sec channel). The reworked function grants the same performances of the original one in optimal working conditions (i.e. a bundle made up of PPP links all working at the same speed), while greatly improving performances on the bundles made up of channels working at different speeds. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14 07:09:12 +08:00
!chan->ops->start_xmit(chan, frag))
skb_queue_tail(&pch->file.xq, frag);
pch->had_frag = 1;
p += flen;
len -= flen;
++ppp->nxseq;
bits = 0;
spin_unlock_bh(&pch->downl);
}
ppp->nxchan = i;
return 1;
noskb:
spin_unlock_bh(&pch->downl);
if (ppp->debug & 1)
netdev_err(ppp->dev, "PPP: no memory (fragment)\n");
++ppp->dev->stats.tx_errors;
++ppp->nxseq;
return 1; /* abandon the frame */
}
#endif /* CONFIG_PPP_MULTILINK */
/*
* Try to send data out on a channel.
*/
static void
ppp_channel_push(struct channel *pch)
{
struct sk_buff *skb;
struct ppp *ppp;
spin_lock_bh(&pch->downl);
if (pch->chan) {
while (!skb_queue_empty(&pch->file.xq)) {
skb = skb_dequeue(&pch->file.xq);
if (!pch->chan->ops->start_xmit(pch->chan, skb)) {
/* put the packet back and try again later */
skb_queue_head(&pch->file.xq, skb);
break;
}
}
} else {
/* channel got deregistered */
skb_queue_purge(&pch->file.xq);
}
spin_unlock_bh(&pch->downl);
/* see if there is anything from the attached unit to be sent */
if (skb_queue_empty(&pch->file.xq)) {
read_lock_bh(&pch->upl);
ppp = pch->ppp;
if (ppp)
ppp_xmit_process(ppp);
read_unlock_bh(&pch->upl);
}
}
/*
* Receive-side routines.
*/
struct ppp_mp_skb_parm {
u32 sequence;
u8 BEbits;
};
#define PPP_MP_CB(skb) ((struct ppp_mp_skb_parm *)((skb)->cb))
static inline void
ppp_do_recv(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
{
ppp_recv_lock(ppp);
if (!ppp->closing)
ppp_receive_frame(ppp, skb, pch);
else
kfree_skb(skb);
ppp_recv_unlock(ppp);
}
void
ppp_input(struct ppp_channel *chan, struct sk_buff *skb)
{
struct channel *pch = chan->ppp;
int proto;
if (!pch) {
kfree_skb(skb);
return;
}
read_lock_bh(&pch->upl);
if (!pskb_may_pull(skb, 2)) {
kfree_skb(skb);
if (pch->ppp) {
++pch->ppp->dev->stats.rx_length_errors;
ppp_receive_error(pch->ppp);
}
goto done;
}
proto = PPP_PROTO(skb);
if (!pch->ppp || proto >= 0xc000 || proto == PPP_CCPFRAG) {
/* put it on the channel queue */
skb_queue_tail(&pch->file.rq, skb);
/* drop old frames if queue too long */
while (pch->file.rq.qlen > PPP_MAX_RQLEN &&
(skb = skb_dequeue(&pch->file.rq)))
kfree_skb(skb);
wake_up_interruptible(&pch->file.rwait);
} else {
ppp_do_recv(pch->ppp, skb, pch);
}
done:
read_unlock_bh(&pch->upl);
}
/* Put a 0-length skb in the receive queue as an error indication */
void
ppp_input_error(struct ppp_channel *chan, int code)
{
struct channel *pch = chan->ppp;
struct sk_buff *skb;
if (!pch)
return;
read_lock_bh(&pch->upl);
if (pch->ppp) {
skb = alloc_skb(0, GFP_ATOMIC);
if (skb) {
skb->len = 0; /* probably unnecessary */
skb->cb[0] = code;
ppp_do_recv(pch->ppp, skb, pch);
}
}
read_unlock_bh(&pch->upl);
}
/*
* We come in here to process a received frame.
* The receive side of the ppp unit is locked.
*/
static void
ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
{
/* note: a 0-length skb is used as an error indication */
if (skb->len > 0) {
#ifdef CONFIG_PPP_MULTILINK
/* XXX do channel-level decompression here */
if (PPP_PROTO(skb) == PPP_MP)
ppp_receive_mp_frame(ppp, skb, pch);
else
#endif /* CONFIG_PPP_MULTILINK */
ppp_receive_nonmp_frame(ppp, skb);
} else {
kfree_skb(skb);
ppp_receive_error(ppp);
}
}
static void
ppp_receive_error(struct ppp *ppp)
{
++ppp->dev->stats.rx_errors;
if (ppp->vj)
slhc_toss(ppp->vj);
}
static void
ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb)
{
struct sk_buff *ns;
int proto, len, npi;
/*
* Decompress the frame, if compressed.
* Note that some decompressors need to see uncompressed frames
* that come in as well as compressed frames.
*/
if (ppp->rc_state && (ppp->rstate & SC_DECOMP_RUN) &&
(ppp->rstate & (SC_DC_FERROR | SC_DC_ERROR)) == 0)
skb = ppp_decompress_frame(ppp, skb);
if (ppp->flags & SC_MUST_COMP && ppp->rstate & SC_DC_FERROR)
goto err;
proto = PPP_PROTO(skb);
switch (proto) {
case PPP_VJC_COMP:
/* decompress VJ compressed packets */
if (!ppp->vj || (ppp->flags & SC_REJ_COMP_TCP))
goto err;
if (skb_tailroom(skb) < 124 || skb_cloned(skb)) {
/* copy to a new sk_buff with more tailroom */
ns = dev_alloc_skb(skb->len + 128);
if (!ns) {
netdev_err(ppp->dev, "PPP: no memory "
"(VJ decomp)\n");
goto err;
}
skb_reserve(ns, 2);
skb_copy_bits(skb, 0, skb_put(ns, skb->len), skb->len);
consume_skb(skb);
skb = ns;
}
else
skb->ip_summed = CHECKSUM_NONE;
len = slhc_uncompress(ppp->vj, skb->data + 2, skb->len - 2);
if (len <= 0) {
netdev_printk(KERN_DEBUG, ppp->dev,
"PPP: VJ decompression error\n");
goto err;
}
len += 2;
if (len > skb->len)
skb_put(skb, len - skb->len);
else if (len < skb->len)
skb_trim(skb, len);
proto = PPP_IP;
break;
case PPP_VJC_UNCOMP:
if (!ppp->vj || (ppp->flags & SC_REJ_COMP_TCP))
goto err;
/* Until we fix the decompressor need to make sure
* data portion is linear.
*/
if (!pskb_may_pull(skb, skb->len))
goto err;
if (slhc_remember(ppp->vj, skb->data + 2, skb->len - 2) <= 0) {
netdev_err(ppp->dev, "PPP: VJ uncompressed error\n");
goto err;
}
proto = PPP_IP;
break;
case PPP_CCP:
ppp_ccp_peek(ppp, skb, 1);
break;
}
++ppp->stats64.rx_packets;
ppp->stats64.rx_bytes += skb->len - 2;
npi = proto_to_npindex(proto);
if (npi < 0) {
/* control or unknown frame - pass it to pppd */
skb_queue_tail(&ppp->file.rq, skb);
/* limit queue length by dropping old frames */
while (ppp->file.rq.qlen > PPP_MAX_RQLEN &&
(skb = skb_dequeue(&ppp->file.rq)))
kfree_skb(skb);
/* wake up any process polling or blocking on read */
wake_up_interruptible(&ppp->file.rwait);
} else {
/* network protocol frame - give it to the kernel */
#ifdef CONFIG_PPP_FILTER
/* check if the packet passes the pass and active filters */
/* the filter instructions are constructed assuming
a four-byte PPP header on each packet */
if (ppp->pass_filter || ppp->active_filter) {
if (skb_unclone(skb, GFP_ATOMIC))
goto err;
*skb_push(skb, 2) = 0;
if (ppp->pass_filter &&
sk_run_filter(skb, ppp->pass_filter) == 0) {
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
"PPP: inbound frame "
"not passed\n");
kfree_skb(skb);
return;
}
if (!(ppp->active_filter &&
sk_run_filter(skb, ppp->active_filter) == 0))
ppp->last_recv = jiffies;
__skb_pull(skb, 2);
} else
#endif /* CONFIG_PPP_FILTER */
ppp->last_recv = jiffies;
if ((ppp->dev->flags & IFF_UP) == 0 ||
ppp->npmode[npi] != NPMODE_PASS) {
kfree_skb(skb);
} else {
/* chop off protocol */
skb_pull_rcsum(skb, 2);
skb->dev = ppp->dev;
skb->protocol = htons(npindex_to_ethertype[npi]);
skb_reset_mac_header(skb);
netif_rx(skb);
}
}
return;
err:
kfree_skb(skb);
ppp_receive_error(ppp);
}
static struct sk_buff *
ppp_decompress_frame(struct ppp *ppp, struct sk_buff *skb)
{
int proto = PPP_PROTO(skb);
struct sk_buff *ns;
int len;
/* Until we fix all the decompressor's need to make sure
* data portion is linear.
*/
if (!pskb_may_pull(skb, skb->len))
goto err;
if (proto == PPP_COMP) {
int obuff_size;
switch(ppp->rcomp->compress_proto) {
case CI_MPPE:
obuff_size = ppp->mru + PPP_HDRLEN + 1;
break;
default:
obuff_size = ppp->mru + PPP_HDRLEN;
break;
}
ns = dev_alloc_skb(obuff_size);
if (!ns) {
netdev_err(ppp->dev, "ppp_decompress_frame: "
"no memory\n");
goto err;
}
/* the decompressor still expects the A/C bytes in the hdr */
len = ppp->rcomp->decompress(ppp->rc_state, skb->data - 2,
skb->len + 2, ns->data, obuff_size);
if (len < 0) {
/* Pass the compressed frame to pppd as an
error indication. */
if (len == DECOMP_FATALERROR)
ppp->rstate |= SC_DC_FERROR;
kfree_skb(ns);
goto err;
}
consume_skb(skb);
skb = ns;
skb_put(skb, len);
skb_pull(skb, 2); /* pull off the A/C bytes */
} else {
/* Uncompressed frame - pass to decompressor so it
can update its dictionary if necessary. */
if (ppp->rcomp->incomp)
ppp->rcomp->incomp(ppp->rc_state, skb->data - 2,
skb->len + 2);
}
return skb;
err:
ppp->rstate |= SC_DC_ERROR;
ppp_receive_error(ppp);
return skb;
}
#ifdef CONFIG_PPP_MULTILINK
/*
* Receive a multilink frame.
* We put it on the reconstruction queue and then pull off
* as many completed frames as we can.
*/
static void
ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
{
u32 mask, seq;
struct channel *ch;
int mphdrlen = (ppp->flags & SC_MP_SHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN;
if (!pskb_may_pull(skb, mphdrlen + 1) || ppp->mrru == 0)
goto err; /* no good, throw it away */
/* Decode sequence number and begin/end bits */
if (ppp->flags & SC_MP_SHORTSEQ) {
seq = ((skb->data[2] & 0x0f) << 8) | skb->data[3];
mask = 0xfff;
} else {
seq = (skb->data[3] << 16) | (skb->data[4] << 8)| skb->data[5];
mask = 0xffffff;
}
PPP_MP_CB(skb)->BEbits = skb->data[2];
skb_pull(skb, mphdrlen); /* pull off PPP and MP headers */
/*
* Do protocol ID decompression on the first fragment of each packet.
*/
if ((PPP_MP_CB(skb)->BEbits & B) && (skb->data[0] & 1))
*skb_push(skb, 1) = 0;
/*
* Expand sequence number to 32 bits, making it as close
* as possible to ppp->minseq.
*/
seq |= ppp->minseq & ~mask;
if ((int)(ppp->minseq - seq) > (int)(mask >> 1))
seq += mask + 1;
else if ((int)(seq - ppp->minseq) > (int)(mask >> 1))
seq -= mask + 1; /* should never happen */
PPP_MP_CB(skb)->sequence = seq;
pch->lastseq = seq;
/*
* If this packet comes before the next one we were expecting,
* drop it.
*/
if (seq_before(seq, ppp->nextseq)) {
kfree_skb(skb);
++ppp->dev->stats.rx_dropped;
ppp_receive_error(ppp);
return;
}
/*
* Reevaluate minseq, the minimum over all channels of the
* last sequence number received on each channel. Because of
* the increasing sequence number rule, we know that any fragment
* before `minseq' which hasn't arrived is never going to arrive.
* The list of channels can't change because we have the receive
* side of the ppp unit locked.
*/
list_for_each_entry(ch, &ppp->channels, clist) {
if (seq_before(ch->lastseq, seq))
seq = ch->lastseq;
}
if (seq_before(ppp->minseq, seq))
ppp->minseq = seq;
/* Put the fragment on the reconstruction queue */
ppp_mp_insert(ppp, skb);
/* If the queue is getting long, don't wait any longer for packets
before the start of the queue. */
if (skb_queue_len(&ppp->mrq) >= PPP_MP_MAX_QLEN) {
struct sk_buff *mskb = skb_peek(&ppp->mrq);
if (seq_before(ppp->minseq, PPP_MP_CB(mskb)->sequence))
ppp->minseq = PPP_MP_CB(mskb)->sequence;
}
/* Pull completed packets off the queue and receive them. */
while ((skb = ppp_mp_reconstruct(ppp))) {
if (pskb_may_pull(skb, 2))
ppp_receive_nonmp_frame(ppp, skb);
else {
++ppp->dev->stats.rx_length_errors;
kfree_skb(skb);
ppp_receive_error(ppp);
}
}
return;
err:
kfree_skb(skb);
ppp_receive_error(ppp);
}
/*
* Insert a fragment on the MP reconstruction queue.
* The queue is ordered by increasing sequence number.
*/
static void
ppp_mp_insert(struct ppp *ppp, struct sk_buff *skb)
{
struct sk_buff *p;
struct sk_buff_head *list = &ppp->mrq;
u32 seq = PPP_MP_CB(skb)->sequence;
/* N.B. we don't need to lock the list lock because we have the
ppp unit receive-side lock. */
skb_queue_walk(list, p) {
if (seq_before(seq, PPP_MP_CB(p)->sequence))
break;
}
__skb_queue_before(list, p, skb);
}
/*
* Reconstruct a packet from the MP fragment queue.
* We go through increasing sequence numbers until we find a
* complete packet, or we get to the sequence number for a fragment
* which hasn't arrived but might still do so.
*/
static struct sk_buff *
ppp_mp_reconstruct(struct ppp *ppp)
{
u32 seq = ppp->nextseq;
u32 minseq = ppp->minseq;
struct sk_buff_head *list = &ppp->mrq;
struct sk_buff *p, *tmp;
struct sk_buff *head, *tail;
struct sk_buff *skb = NULL;
int lost = 0, len = 0;
if (ppp->mrru == 0) /* do nothing until mrru is set */
return NULL;
head = list->next;
tail = NULL;
skb_queue_walk_safe(list, p, tmp) {
again:
if (seq_before(PPP_MP_CB(p)->sequence, seq)) {
/* this can't happen, anyway ignore the skb */
netdev_err(ppp->dev, "ppp_mp_reconstruct bad "
"seq %u < %u\n",
PPP_MP_CB(p)->sequence, seq);
__skb_unlink(p, list);
kfree_skb(p);
continue;
}
if (PPP_MP_CB(p)->sequence != seq) {
u32 oldseq;
/* Fragment `seq' is missing. If it is after
minseq, it might arrive later, so stop here. */
if (seq_after(seq, minseq))
break;
/* Fragment `seq' is lost, keep going. */
lost = 1;
oldseq = seq;
seq = seq_before(minseq, PPP_MP_CB(p)->sequence)?
minseq + 1: PPP_MP_CB(p)->sequence;
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
"lost frag %u..%u\n",
oldseq, seq-1);
goto again;
}
/*
* At this point we know that all the fragments from
* ppp->nextseq to seq are either present or lost.
* Also, there are no complete packets in the queue
* that have no missing fragments and end before this
* fragment.
*/
/* B bit set indicates this fragment starts a packet */
if (PPP_MP_CB(p)->BEbits & B) {
head = p;
lost = 0;
len = 0;
}
len += p->len;
/* Got a complete packet yet? */
if (lost == 0 && (PPP_MP_CB(p)->BEbits & E) &&
(PPP_MP_CB(head)->BEbits & B)) {
if (len > ppp->mrru + 2) {
++ppp->dev->stats.rx_length_errors;
netdev_printk(KERN_DEBUG, ppp->dev,
"PPP: reconstructed packet"
" is too long (%d)\n", len);
} else {
tail = p;
break;
}
ppp->nextseq = seq + 1;
}
/*
* If this is the ending fragment of a packet,
* and we haven't found a complete valid packet yet,
* we can discard up to and including this fragment.
*/
if (PPP_MP_CB(p)->BEbits & E) {
struct sk_buff *tmp2;
skb_queue_reverse_walk_from_safe(list, p, tmp2) {
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
"discarding frag %u\n",
PPP_MP_CB(p)->sequence);
__skb_unlink(p, list);
kfree_skb(p);
}
head = skb_peek(list);
if (!head)
break;
}
++seq;
}
/* If we have a complete packet, copy it all into one skb. */
if (tail != NULL) {
/* If we have discarded any fragments,
signal a receive error. */
if (PPP_MP_CB(head)->sequence != ppp->nextseq) {
skb_queue_walk_safe(list, p, tmp) {
if (p == head)
break;
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
"discarding frag %u\n",
PPP_MP_CB(p)->sequence);
__skb_unlink(p, list);
kfree_skb(p);
}
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
" missed pkts %u..%u\n",
ppp->nextseq,
PPP_MP_CB(head)->sequence-1);
++ppp->dev->stats.rx_dropped;
ppp_receive_error(ppp);
}
skb = head;
if (head != tail) {
struct sk_buff **fragpp = &skb_shinfo(skb)->frag_list;
p = skb_queue_next(list, head);
__skb_unlink(skb, list);
skb_queue_walk_from_safe(list, p, tmp) {
__skb_unlink(p, list);
*fragpp = p;
p->next = NULL;
fragpp = &p->next;
skb->len += p->len;
skb->data_len += p->len;
skb->truesize += p->truesize;
if (p == tail)
break;
}
} else {
__skb_unlink(skb, list);
}
ppp->nextseq = PPP_MP_CB(tail)->sequence + 1;
}
return skb;
}
#endif /* CONFIG_PPP_MULTILINK */
/*
* Channel interface.
*/
/* Create a new, unattached ppp channel. */
int ppp_register_channel(struct ppp_channel *chan)
{
return ppp_register_net_channel(current->nsproxy->net_ns, chan);
}
/* Create a new, unattached ppp channel for specified net. */
int ppp_register_net_channel(struct net *net, struct ppp_channel *chan)
{
struct channel *pch;
struct ppp_net *pn;
pch = kzalloc(sizeof(struct channel), GFP_KERNEL);
if (!pch)
return -ENOMEM;
pn = ppp_pernet(net);
pch->ppp = NULL;
pch->chan = chan;
pch->chan_net = net;
chan->ppp = pch;
init_ppp_file(&pch->file, CHANNEL);
pch->file.hdrlen = chan->hdrlen;
#ifdef CONFIG_PPP_MULTILINK
pch->lastseq = -1;
#endif /* CONFIG_PPP_MULTILINK */
init_rwsem(&pch->chan_sem);
spin_lock_init(&pch->downl);
rwlock_init(&pch->upl);
spin_lock_bh(&pn->all_channels_lock);
pch->file.index = ++pn->last_channel_index;
list_add(&pch->list, &pn->new_channels);
atomic_inc(&channel_count);
spin_unlock_bh(&pn->all_channels_lock);
return 0;
}
/*
* Return the index of a channel.
*/
int ppp_channel_index(struct ppp_channel *chan)
{
struct channel *pch = chan->ppp;
if (pch)
return pch->file.index;
return -1;
}
/*
* Return the PPP unit number to which a channel is connected.
*/
int ppp_unit_number(struct ppp_channel *chan)
{
struct channel *pch = chan->ppp;
int unit = -1;
if (pch) {
read_lock_bh(&pch->upl);
if (pch->ppp)
unit = pch->ppp->file.index;
read_unlock_bh(&pch->upl);
}
return unit;
}
/*
* Return the PPP device interface name of a channel.
*/
char *ppp_dev_name(struct ppp_channel *chan)
{
struct channel *pch = chan->ppp;
char *name = NULL;
if (pch) {
read_lock_bh(&pch->upl);
if (pch->ppp && pch->ppp->dev)
name = pch->ppp->dev->name;
read_unlock_bh(&pch->upl);
}
return name;
}
/*
* Disconnect a channel from the generic layer.
* This must be called in process context.
*/
void
ppp_unregister_channel(struct ppp_channel *chan)
{
struct channel *pch = chan->ppp;
struct ppp_net *pn;
if (!pch)
return; /* should never happen */
chan->ppp = NULL;
/*
* This ensures that we have returned from any calls into the
* the channel's start_xmit or ioctl routine before we proceed.
*/
down_write(&pch->chan_sem);
spin_lock_bh(&pch->downl);
pch->chan = NULL;
spin_unlock_bh(&pch->downl);
up_write(&pch->chan_sem);
ppp_disconnect_channel(pch);
pn = ppp_pernet(pch->chan_net);
spin_lock_bh(&pn->all_channels_lock);
list_del(&pch->list);
spin_unlock_bh(&pn->all_channels_lock);
pch->file.dead = 1;
wake_up_interruptible(&pch->file.rwait);
if (atomic_dec_and_test(&pch->file.refcnt))
ppp_destroy_channel(pch);
}
/*
* Callback from a channel when it can accept more to transmit.
* This should be called at BH/softirq level, not interrupt level.
*/
void
ppp_output_wakeup(struct ppp_channel *chan)
{
struct channel *pch = chan->ppp;
if (!pch)
return;
ppp_channel_push(pch);
}
/*
* Compression control.
*/
/* Process the PPPIOCSCOMPRESS ioctl. */
static int
ppp_set_compress(struct ppp *ppp, unsigned long arg)
{
int err;
struct compressor *cp, *ocomp;
struct ppp_option_data data;
void *state, *ostate;
unsigned char ccp_option[CCP_MAX_OPTION_LENGTH];
err = -EFAULT;
if (copy_from_user(&data, (void __user *) arg, sizeof(data)) ||
(data.length <= CCP_MAX_OPTION_LENGTH &&
copy_from_user(ccp_option, (void __user *) data.ptr, data.length)))
goto out;
err = -EINVAL;
if (data.length > CCP_MAX_OPTION_LENGTH ||
ccp_option[1] < 2 || ccp_option[1] > data.length)
goto out;
cp = try_then_request_module(
find_compressor(ccp_option[0]),
"ppp-compress-%d", ccp_option[0]);
if (!cp)
goto out;
err = -ENOBUFS;
if (data.transmit) {
state = cp->comp_alloc(ccp_option, data.length);
if (state) {
ppp_xmit_lock(ppp);
ppp->xstate &= ~SC_COMP_RUN;
ocomp = ppp->xcomp;
ostate = ppp->xc_state;
ppp->xcomp = cp;
ppp->xc_state = state;
ppp_xmit_unlock(ppp);
if (ostate) {
ocomp->comp_free(ostate);
module_put(ocomp->owner);
}
err = 0;
} else
module_put(cp->owner);
} else {
state = cp->decomp_alloc(ccp_option, data.length);
if (state) {
ppp_recv_lock(ppp);
ppp->rstate &= ~SC_DECOMP_RUN;
ocomp = ppp->rcomp;
ostate = ppp->rc_state;
ppp->rcomp = cp;
ppp->rc_state = state;
ppp_recv_unlock(ppp);
if (ostate) {
ocomp->decomp_free(ostate);
module_put(ocomp->owner);
}
err = 0;
} else
module_put(cp->owner);
}
out:
return err;
}
/*
* Look at a CCP packet and update our state accordingly.
* We assume the caller has the xmit or recv path locked.
*/
static void
ppp_ccp_peek(struct ppp *ppp, struct sk_buff *skb, int inbound)
{
unsigned char *dp;
int len;
if (!pskb_may_pull(skb, CCP_HDRLEN + 2))
return; /* no header */
dp = skb->data + 2;
switch (CCP_CODE(dp)) {
case CCP_CONFREQ:
/* A ConfReq starts negotiation of compression
* in one direction of transmission,
* and hence brings it down...but which way?
*
* Remember:
* A ConfReq indicates what the sender would like to receive
*/
if(inbound)
/* He is proposing what I should send */
ppp->xstate &= ~SC_COMP_RUN;
else
/* I am proposing to what he should send */
ppp->rstate &= ~SC_DECOMP_RUN;
break;
case CCP_TERMREQ:
case CCP_TERMACK:
/*
* CCP is going down, both directions of transmission
*/
ppp->rstate &= ~SC_DECOMP_RUN;
ppp->xstate &= ~SC_COMP_RUN;
break;
case CCP_CONFACK:
if ((ppp->flags & (SC_CCP_OPEN | SC_CCP_UP)) != SC_CCP_OPEN)
break;
len = CCP_LENGTH(dp);
if (!pskb_may_pull(skb, len + 2))
return; /* too short */
dp += CCP_HDRLEN;
len -= CCP_HDRLEN;
if (len < CCP_OPT_MINLEN || len < CCP_OPT_LENGTH(dp))
break;
if (inbound) {
/* we will start receiving compressed packets */
if (!ppp->rc_state)
break;
if (ppp->rcomp->decomp_init(ppp->rc_state, dp, len,
ppp->file.index, 0, ppp->mru, ppp->debug)) {
ppp->rstate |= SC_DECOMP_RUN;
ppp->rstate &= ~(SC_DC_ERROR | SC_DC_FERROR);
}
} else {
/* we will soon start sending compressed packets */
if (!ppp->xc_state)
break;
if (ppp->xcomp->comp_init(ppp->xc_state, dp, len,
ppp->file.index, 0, ppp->debug))
ppp->xstate |= SC_COMP_RUN;
}
break;
case CCP_RESETACK:
/* reset the [de]compressor */
if ((ppp->flags & SC_CCP_UP) == 0)
break;
if (inbound) {
if (ppp->rc_state && (ppp->rstate & SC_DECOMP_RUN)) {
ppp->rcomp->decomp_reset(ppp->rc_state);
ppp->rstate &= ~SC_DC_ERROR;
}
} else {
if (ppp->xc_state && (ppp->xstate & SC_COMP_RUN))
ppp->xcomp->comp_reset(ppp->xc_state);
}
break;
}
}
/* Free up compression resources. */
static void
ppp_ccp_closed(struct ppp *ppp)
{
void *xstate, *rstate;
struct compressor *xcomp, *rcomp;
ppp_lock(ppp);
ppp->flags &= ~(SC_CCP_OPEN | SC_CCP_UP);
ppp->xstate = 0;
xcomp = ppp->xcomp;
xstate = ppp->xc_state;
ppp->xc_state = NULL;
ppp->rstate = 0;
rcomp = ppp->rcomp;
rstate = ppp->rc_state;
ppp->rc_state = NULL;
ppp_unlock(ppp);
if (xstate) {
xcomp->comp_free(xstate);
module_put(xcomp->owner);
}
if (rstate) {
rcomp->decomp_free(rstate);
module_put(rcomp->owner);
}
}
/* List of compressors. */
static LIST_HEAD(compressor_list);
static DEFINE_SPINLOCK(compressor_list_lock);
struct compressor_entry {
struct list_head list;
struct compressor *comp;
};
static struct compressor_entry *
find_comp_entry(int proto)
{
struct compressor_entry *ce;
list_for_each_entry(ce, &compressor_list, list) {
if (ce->comp->compress_proto == proto)
return ce;
}
return NULL;
}
/* Register a compressor */
int
ppp_register_compressor(struct compressor *cp)
{
struct compressor_entry *ce;
int ret;
spin_lock(&compressor_list_lock);
ret = -EEXIST;
if (find_comp_entry(cp->compress_proto))
goto out;
ret = -ENOMEM;
ce = kmalloc(sizeof(struct compressor_entry), GFP_ATOMIC);
if (!ce)
goto out;
ret = 0;
ce->comp = cp;
list_add(&ce->list, &compressor_list);
out:
spin_unlock(&compressor_list_lock);
return ret;
}
/* Unregister a compressor */
void
ppp_unregister_compressor(struct compressor *cp)
{
struct compressor_entry *ce;
spin_lock(&compressor_list_lock);
ce = find_comp_entry(cp->compress_proto);
if (ce && ce->comp == cp) {
list_del(&ce->list);
kfree(ce);
}
spin_unlock(&compressor_list_lock);
}
/* Find a compressor. */
static struct compressor *
find_compressor(int type)
{
struct compressor_entry *ce;
struct compressor *cp = NULL;
spin_lock(&compressor_list_lock);
ce = find_comp_entry(type);
if (ce) {
cp = ce->comp;
if (!try_module_get(cp->owner))
cp = NULL;
}
spin_unlock(&compressor_list_lock);
return cp;
}
/*
* Miscelleneous stuff.
*/
static void
ppp_get_stats(struct ppp *ppp, struct ppp_stats *st)
{
struct slcompress *vj = ppp->vj;
memset(st, 0, sizeof(*st));
st->p.ppp_ipackets = ppp->stats64.rx_packets;
st->p.ppp_ierrors = ppp->dev->stats.rx_errors;
st->p.ppp_ibytes = ppp->stats64.rx_bytes;
st->p.ppp_opackets = ppp->stats64.tx_packets;
st->p.ppp_oerrors = ppp->dev->stats.tx_errors;
st->p.ppp_obytes = ppp->stats64.tx_bytes;
if (!vj)
return;
st->vj.vjs_packets = vj->sls_o_compressed + vj->sls_o_uncompressed;
st->vj.vjs_compressed = vj->sls_o_compressed;
st->vj.vjs_searches = vj->sls_o_searches;
st->vj.vjs_misses = vj->sls_o_misses;
st->vj.vjs_errorin = vj->sls_i_error;
st->vj.vjs_tossed = vj->sls_i_tossed;
st->vj.vjs_uncompressedin = vj->sls_i_uncompressed;
st->vj.vjs_compressedin = vj->sls_i_compressed;
}
/*
* Stuff for handling the lists of ppp units and channels
* and for initialization.
*/
/*
* Create a new ppp interface unit. Fails if it can't allocate memory
* or if there is already a unit with the requested number.
* unit == -1 means allocate a new number.
*/
static struct ppp *
ppp_create_interface(struct net *net, int unit, int *retp)
{
struct ppp *ppp;
struct ppp_net *pn;
struct net_device *dev = NULL;
int ret = -ENOMEM;
int i;
dev = alloc_netdev(sizeof(struct ppp), "", ppp_setup);
if (!dev)
goto out1;
pn = ppp_pernet(net);
ppp = netdev_priv(dev);
ppp->dev = dev;
ppp->mru = PPP_MRU;
init_ppp_file(&ppp->file, INTERFACE);
ppp->file.hdrlen = PPP_HDRLEN - 2; /* don't count proto bytes */
for (i = 0; i < NUM_NP; ++i)
ppp->npmode[i] = NPMODE_PASS;
INIT_LIST_HEAD(&ppp->channels);
spin_lock_init(&ppp->rlock);
spin_lock_init(&ppp->wlock);
#ifdef CONFIG_PPP_MULTILINK
ppp->minseq = -1;
skb_queue_head_init(&ppp->mrq);
#endif /* CONFIG_PPP_MULTILINK */
/*
* drum roll: don't forget to set
* the net device is belong to
*/
dev_net_set(dev, net);
mutex_lock(&pn->all_ppp_mutex);
if (unit < 0) {
unit = unit_get(&pn->units_idr, ppp);
if (unit < 0) {
ret = unit;
goto out2;
}
} else {
ret = -EEXIST;
if (unit_find(&pn->units_idr, unit))
goto out2; /* unit already exists */
/*
* if caller need a specified unit number
* lets try to satisfy him, otherwise --
* he should better ask us for new unit number
*
* NOTE: yes I know that returning EEXIST it's not
* fair but at least pppd will ask us to allocate
* new unit in this case so user is happy :)
*/
unit = unit_set(&pn->units_idr, ppp, unit);
if (unit < 0)
goto out2;
}
/* Initialize the new ppp unit */
ppp->file.index = unit;
sprintf(dev->name, "ppp%d", unit);
ret = register_netdev(dev);
if (ret != 0) {
unit_put(&pn->units_idr, unit);
netdev_err(ppp->dev, "PPP: couldn't register device %s (%d)\n",
dev->name, ret);
goto out2;
}
ppp->ppp_net = net;
atomic_inc(&ppp_unit_count);
mutex_unlock(&pn->all_ppp_mutex);
*retp = 0;
return ppp;
out2:
mutex_unlock(&pn->all_ppp_mutex);
free_netdev(dev);
out1:
*retp = ret;
return NULL;
}
/*
* Initialize a ppp_file structure.
*/
static void
init_ppp_file(struct ppp_file *pf, int kind)
{
pf->kind = kind;
skb_queue_head_init(&pf->xq);
skb_queue_head_init(&pf->rq);
atomic_set(&pf->refcnt, 1);
init_waitqueue_head(&pf->rwait);
}
/*
* Take down a ppp interface unit - called when the owning file
* (the one that created the unit) is closed or detached.
*/
static void ppp_shutdown_interface(struct ppp *ppp)
{
struct ppp_net *pn;
pn = ppp_pernet(ppp->ppp_net);
mutex_lock(&pn->all_ppp_mutex);
/* This will call dev_close() for us. */
ppp_lock(ppp);
if (!ppp->closing) {
ppp->closing = 1;
ppp_unlock(ppp);
unregister_netdev(ppp->dev);
unit_put(&pn->units_idr, ppp->file.index);
} else
ppp_unlock(ppp);
ppp->file.dead = 1;
ppp->owner = NULL;
wake_up_interruptible(&ppp->file.rwait);
mutex_unlock(&pn->all_ppp_mutex);
}
/*
* Free the memory used by a ppp unit. This is only called once
* there are no channels connected to the unit and no file structs
* that reference the unit.
*/
static void ppp_destroy_interface(struct ppp *ppp)
{
atomic_dec(&ppp_unit_count);
if (!ppp->file.dead || ppp->n_channels) {
/* "can't happen" */
netdev_err(ppp->dev, "ppp: destroying ppp struct %p "
"but dead=%d n_channels=%d !\n",
ppp, ppp->file.dead, ppp->n_channels);
return;
}
ppp_ccp_closed(ppp);
if (ppp->vj) {
slhc_free(ppp->vj);
ppp->vj = NULL;
}
skb_queue_purge(&ppp->file.xq);
skb_queue_purge(&ppp->file.rq);
#ifdef CONFIG_PPP_MULTILINK
skb_queue_purge(&ppp->mrq);
#endif /* CONFIG_PPP_MULTILINK */
#ifdef CONFIG_PPP_FILTER
kfree(ppp->pass_filter);
ppp->pass_filter = NULL;
kfree(ppp->active_filter);
ppp->active_filter = NULL;
#endif /* CONFIG_PPP_FILTER */
kfree_skb(ppp->xmit_pending);
free_netdev(ppp->dev);
}
/*
* Locate an existing ppp unit.
* The caller should have locked the all_ppp_mutex.
*/
static struct ppp *
ppp_find_unit(struct ppp_net *pn, int unit)
{
return unit_find(&pn->units_idr, unit);
}
/*
* Locate an existing ppp channel.
* The caller should have locked the all_channels_lock.
* First we look in the new_channels list, then in the
* all_channels list. If found in the new_channels list,
* we move it to the all_channels list. This is for speed
* when we have a lot of channels in use.
*/
static struct channel *
ppp_find_channel(struct ppp_net *pn, int unit)
{
struct channel *pch;
list_for_each_entry(pch, &pn->new_channels, list) {
if (pch->file.index == unit) {
list_move(&pch->list, &pn->all_channels);
return pch;
}
}
list_for_each_entry(pch, &pn->all_channels, list) {
if (pch->file.index == unit)
return pch;
}
return NULL;
}
/*
* Connect a PPP channel to a PPP interface unit.
*/
static int
ppp_connect_channel(struct channel *pch, int unit)
{
struct ppp *ppp;
struct ppp_net *pn;
int ret = -ENXIO;
int hdrlen;
pn = ppp_pernet(pch->chan_net);
mutex_lock(&pn->all_ppp_mutex);
ppp = ppp_find_unit(pn, unit);
if (!ppp)
goto out;
write_lock_bh(&pch->upl);
ret = -EINVAL;
if (pch->ppp)
goto outl;
ppp_lock(ppp);
if (pch->file.hdrlen > ppp->file.hdrlen)
ppp->file.hdrlen = pch->file.hdrlen;
hdrlen = pch->file.hdrlen + 2; /* for protocol bytes */
if (hdrlen > ppp->dev->hard_header_len)
ppp->dev->hard_header_len = hdrlen;
list_add_tail(&pch->clist, &ppp->channels);
++ppp->n_channels;
pch->ppp = ppp;
atomic_inc(&ppp->file.refcnt);
ppp_unlock(ppp);
ret = 0;
outl:
write_unlock_bh(&pch->upl);
out:
mutex_unlock(&pn->all_ppp_mutex);
return ret;
}
/*
* Disconnect a channel from its ppp unit.
*/
static int
ppp_disconnect_channel(struct channel *pch)
{
struct ppp *ppp;
int err = -EINVAL;
write_lock_bh(&pch->upl);
ppp = pch->ppp;
pch->ppp = NULL;
write_unlock_bh(&pch->upl);
if (ppp) {
/* remove it from the ppp unit's list */
ppp_lock(ppp);
list_del(&pch->clist);
if (--ppp->n_channels == 0)
wake_up_interruptible(&ppp->file.rwait);
ppp_unlock(ppp);
if (atomic_dec_and_test(&ppp->file.refcnt))
ppp_destroy_interface(ppp);
err = 0;
}
return err;
}
/*
* Free up the resources used by a ppp channel.
*/
static void ppp_destroy_channel(struct channel *pch)
{
atomic_dec(&channel_count);
if (!pch->file.dead) {
/* "can't happen" */
pr_err("ppp: destroying undead channel %p !\n", pch);
return;
}
skb_queue_purge(&pch->file.xq);
skb_queue_purge(&pch->file.rq);
kfree(pch);
}
static void __exit ppp_cleanup(void)
{
/* should never happen */
if (atomic_read(&ppp_unit_count) || atomic_read(&channel_count))
pr_err("PPP: removing module but units remain!\n");
unregister_chrdev(PPP_MAJOR, "ppp");
device_destroy(ppp_class, MKDEV(PPP_MAJOR, 0));
class_destroy(ppp_class);
unregister_pernet_device(&ppp_net_ops);
}
/*
* Units handling. Caller must protect concurrent access
* by holding all_ppp_mutex
*/
/* associate pointer with specified number */
static int unit_set(struct idr *p, void *ptr, int n)
{
int unit;
unit = idr_alloc(p, ptr, n, n + 1, GFP_KERNEL);
if (unit == -ENOSPC)
unit = -EINVAL;
return unit;
}
/* get new free unit number and associate pointer with it */
static int unit_get(struct idr *p, void *ptr)
{
return idr_alloc(p, ptr, 0, 0, GFP_KERNEL);
}
/* put unit number back to a pool */
static void unit_put(struct idr *p, int n)
{
idr_remove(p, n);
}
/* get pointer associated with the number */
static void *unit_find(struct idr *p, int n)
{
return idr_find(p, n);
}
/* Module/initialization stuff */
module_init(ppp_init);
module_exit(ppp_cleanup);
EXPORT_SYMBOL(ppp_register_net_channel);
EXPORT_SYMBOL(ppp_register_channel);
EXPORT_SYMBOL(ppp_unregister_channel);
EXPORT_SYMBOL(ppp_channel_index);
EXPORT_SYMBOL(ppp_unit_number);
EXPORT_SYMBOL(ppp_dev_name);
EXPORT_SYMBOL(ppp_input);
EXPORT_SYMBOL(ppp_input_error);
EXPORT_SYMBOL(ppp_output_wakeup);
EXPORT_SYMBOL(ppp_register_compressor);
EXPORT_SYMBOL(ppp_unregister_compressor);
MODULE_LICENSE("GPL");
driver core: add devname module aliases to allow module on-demand auto-loading This adds: alias: devname:<name> to some common kernel modules, which will allow the on-demand loading of the kernel module when the device node is accessed. Ideally all these modules would be compiled-in, but distros seems too much in love with their modularization that we need to cover the common cases with this new facility. It will allow us to remove a bunch of pretty useless init scripts and modprobes from init scripts. The static device node aliases will be carried in the module itself. The program depmod will extract this information to a file in the module directory: $ cat /lib/modules/2.6.34-00650-g537b60d-dirty/modules.devname # Device nodes to trigger on-demand module loading. microcode cpu/microcode c10:184 fuse fuse c10:229 ppp_generic ppp c108:0 tun net/tun c10:200 dm_mod mapper/control c10:235 Udev will pick up the depmod created file on startup and create all the static device nodes which the kernel modules specify, so that these modules get automatically loaded when the device node is accessed: $ /sbin/udevd --debug ... static_dev_create_from_modules: mknod '/dev/cpu/microcode' c10:184 static_dev_create_from_modules: mknod '/dev/fuse' c10:229 static_dev_create_from_modules: mknod '/dev/ppp' c108:0 static_dev_create_from_modules: mknod '/dev/net/tun' c10:200 static_dev_create_from_modules: mknod '/dev/mapper/control' c10:235 udev_rules_apply_static_dev_perms: chmod '/dev/net/tun' 0666 udev_rules_apply_static_dev_perms: chmod '/dev/fuse' 0666 A few device nodes are switched to statically allocated numbers, to allow the static nodes to work. This might also useful for systems which still run a plain static /dev, which is completely unsafe to use with any dynamic minor numbers. Note: The devname aliases must be limited to the *common* and *single*instance* device nodes, like the misc devices, and never be used for conceptually limited systems like the loop devices, which should rather get fixed properly and get a control node for losetup to talk to, instead of creating a random number of device nodes in advance, regardless if they are ever used. This facility is to hide the mess distros are creating with too modualized kernels, and just to hide that these modules are not compiled-in, and not to paper-over broken concepts. Thanks! :) Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: David S. Miller <davem@davemloft.net> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Ian Kent <raven@themaw.net> Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 00:07:20 +08:00
MODULE_ALIAS_CHARDEV(PPP_MAJOR, 0);
MODULE_ALIAS("devname:ppp");