p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/arch/arm/mach-at91/generic.h

62 lines
2.4 KiB
C
Raw Normal View History

[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-10 01:05:41 +08:00
/*
[ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories Now that Linux includes support for the Atmel AT91SAM9260 and AT91SAM9261 processors in addition to the original Atmel AT91RM9200 (with support for more AT91 processors pending), the "mach-at91rm9200" and "arch-at91rm9200" directories should be renamed to indicate their more generic nature. The following git commands should be run BEFORE applying this patch: git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91 git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91 Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-05 18:42:07 +08:00
* linux/arch/arm/mach-at91/generic.h
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-10 01:05:41 +08:00
*
* Copyright (C) 2005 David Brownell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
[ARM] 3866/1: AT91 clock update This patch makes the AT91 clock.c support processor-generic (AT91RM9200 and AT91SAM9xxx). The clocks supported by a particular AT91 processor are defined in the processor-specific file and are registered with clock.c at startup. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 17:50:59 +08:00
/* Processors */
[ARM] 3867/1: AT91 GPIO update This patch makes the AT91 gpio.c support processor-generic (AT91RM9200 and AT91SAM9xxx). The GPIO controllers supported by a particular AT91 processor are defined in the processor-specific file and are registered with gpio.c at startup. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 20:23:00 +08:00
extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
[ARM] 3948/1: AT91: Initial support for AT91SAM9261 and AT91SAM9260 This patch adds the initial support for the newer Atmel AT91SAM9261 and AT91SAM9260 processors. The code is based on, and makes use of, the existing AT91RM9200 support. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 19:27:38 +08:00
extern void __init at91sam9260_initialize(unsigned long main_clock);
extern void __init at91sam9261_initialize(unsigned long main_clock);
[ARM] 4145/2: AT91: Add support for AT91SAM9263 processor Add support for the Atmel AT91SAM9263 processor. It is similar to the AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08 16:42:40 +08:00
extern void __init at91sam9263_initialize(unsigned long main_clock);
[ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors. Add support for Atmel's new AT91SAM9RL range of processors. Includes similar peripherals as other AT91SAM9 processors, but with a High-speed USB controller and various sizes of internal SRAM. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-12 03:49:56 +08:00
extern void __init at91sam9rl_initialize(unsigned long main_clock);
[ARM] 4535/1: AT91x40 function prototypes Prototypes for the at91x40 CPU support functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-30 09:39:02 +08:00
extern void __init at91x40_initialize(unsigned long main_clock);
[ARM] 4764/1: [AT91] AT91CAP9 core support Add support for Atmel's AT91CAP9 Customizable Microcontroller family. <http://www.atmel.com/products/AT91CAP/Default.asp> Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-24 22:10:39 +08:00
extern void __init at91cap9_initialize(unsigned long main_clock);
[ARM] 3866/1: AT91 clock update This patch makes the AT91 clock.c support processor-generic (AT91RM9200 and AT91SAM9xxx). The clocks supported by a particular AT91 processor are defined in the processor-specific file and are registered with clock.c at startup. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 17:50:59 +08:00
[ARM] 3711/1: AT91 timer update Patch from Andrew Victor The AIC interrupt controller is the same on the Atmel AT91RM9200, AT91SAM9261 and AT91SAM9260 processors. This patch removes any RM9200-specific naming from the IRQ driver, and moves the AT91RM9200's default IRQ priority table into at91rm9200.c. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-06 00:22:52 +08:00
/* Interrupts */
[ARM] 3867/1: AT91 GPIO update This patch makes the AT91 gpio.c support processor-generic (AT91RM9200 and AT91SAM9xxx). The GPIO controllers supported by a particular AT91 processor are defined in the processor-specific file and are registered with gpio.c at startup. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 20:23:00 +08:00
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
[ARM] 3948/1: AT91: Initial support for AT91SAM9261 and AT91SAM9260 This patch adds the initial support for the newer Atmel AT91SAM9261 and AT91SAM9260 processors. The code is based on, and makes use of, the existing AT91RM9200 support. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 19:27:38 +08:00
extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
[ARM] 4145/2: AT91: Add support for AT91SAM9263 processor Add support for the Atmel AT91SAM9263 processor. It is similar to the AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08 16:42:40 +08:00
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
[ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors. Add support for Atmel's new AT91SAM9RL range of processors. Includes similar peripherals as other AT91SAM9 processors, but with a High-speed USB controller and various sizes of internal SRAM. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-12 03:49:56 +08:00
extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
[ARM] 4535/1: AT91x40 function prototypes Prototypes for the at91x40 CPU support functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-30 09:39:02 +08:00
extern void __init at91x40_init_interrupts(unsigned int priority[]);
[ARM] 4764/1: [AT91] AT91CAP9 core support Add support for Atmel's AT91CAP9 Customizable Microcontroller family. <http://www.atmel.com/products/AT91CAP/Default.asp> Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-24 22:10:39 +08:00
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
[ARM] 3711/1: AT91 timer update Patch from Andrew Victor The AIC interrupt controller is the same on the Atmel AT91RM9200, AT91SAM9261 and AT91SAM9260 processors. This patch removes any RM9200-specific naming from the IRQ driver, and moves the AT91RM9200's default IRQ priority table into at91rm9200.c. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-06 00:22:52 +08:00
extern void __init at91_aic_init(unsigned int priority[]);
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-10 01:05:41 +08:00
[ARM] 3711/1: AT91 timer update Patch from Andrew Victor The AIC interrupt controller is the same on the Atmel AT91RM9200, AT91SAM9261 and AT91SAM9260 processors. This patch removes any RM9200-specific naming from the IRQ driver, and moves the AT91RM9200's default IRQ priority table into at91rm9200.c. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-06 00:22:52 +08:00
/* Timer */
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-10 01:05:41 +08:00
struct sys_timer;
extern struct sys_timer at91rm9200_timer;
[ARM] 3948/1: AT91: Initial support for AT91SAM9261 and AT91SAM9260 This patch adds the initial support for the newer Atmel AT91SAM9261 and AT91SAM9260 processors. The code is based on, and makes use of, the existing AT91RM9200 support. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 19:27:38 +08:00
extern struct sys_timer at91sam926x_timer;
[ARM] 4535/1: AT91x40 function prototypes Prototypes for the at91x40 CPU support functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-30 09:39:02 +08:00
extern struct sys_timer at91x40_timer;
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-10 01:05:41 +08:00
[ARM] 3711/1: AT91 timer update Patch from Andrew Victor The AIC interrupt controller is the same on the Atmel AT91RM9200, AT91SAM9261 and AT91SAM9260 processors. This patch removes any RM9200-specific naming from the IRQ driver, and moves the AT91RM9200's default IRQ priority table into at91rm9200.c. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-06 00:22:52 +08:00
/* Clocks */
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-10 01:05:41 +08:00
extern int __init at91_clock_init(unsigned long main_clock);
[ARM] 3605/1: AT91RM9200 Power Management Patch from Andrew Victor This patch adds the core Power Management support for the AT91RM9200 processor. It will support suspend-to-RAM and standby modes. The suspend-to-RAM functionality is not 100% complete. The code that needs to be execute from the internal SRAM to restore the system is outstanding. For now we just fall through to Standby mode. The AT91-specific at91_suspend_entering_slow_clock() function will eventually be replaced by clk_must_disable() once that functionality is added to mainline clock API. Patch from David Brownell. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-21 02:30:19 +08:00
struct device;
extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);
/* Power Management */
extern void at91_irq_suspend(void);
extern void at91_irq_resume(void);
[ARM] 3867/1: AT91 GPIO update This patch makes the AT91 gpio.c support processor-generic (AT91RM9200 and AT91SAM9xxx). The GPIO controllers supported by a particular AT91 processor are defined in the processor-specific file and are registered with gpio.c at startup. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 20:23:00 +08:00
/* GPIO */
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
struct at91_gpio_bank {
[ARM] 4739/1: at91sam9263: make gpio bank C and D irqs work On the at91sam9263, IRQs for GPIO banks C and D don't currently work. This is because banks C, D, and E share one clock and toplevel IRQ, but the AT91 code setting up and handling GPIO IRQs expects no sharing. This patch: - Fixes GPIO IRQ setup and handling to cope with GPIO banks that are shared like on sam9263 chips, by setting up a list of those banks and making the IRQ dispatching logic scan that list. - Precomputes the address of each bank's registers, saving it with other per-bank data so that it no longer needs to be constantly recomputed during IRQs and other GPIO operations. That shrinks hot-path code, while helping the GPIO bank irq updates. - Fixes a minor bug where IRQ_TYPE_NONE was wrongly rejected (it just means "use the default", which is "both edges" here). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-05 01:30:24 +08:00
unsigned chipbase; /* bank's first GPIO number */
void __iomem *regbase; /* base of register bank */
struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */
[ARM] 3867/1: AT91 GPIO update This patch makes the AT91 gpio.c support processor-generic (AT91RM9200 and AT91SAM9xxx). The GPIO controllers supported by a particular AT91 processor are defined in the processor-specific file and are registered with gpio.c at startup. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27 20:23:00 +08:00
unsigned short id; /* peripheral ID */
unsigned long offset; /* offset from system peripheral base */
struct clk *clock; /* associated clock */
};
extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
extern void __init at91_gpio_irq_setup(void);
[ARM] 3946/1: AT91: at91_arch_reset and at91_extern_irq The external interrupt sources are different on the various AT91 processors. This patch introduces the global 'at91_extern_irq' variable that contains a bitset of the available external interrupt sources. The processor reset mechanism also differs on the various AT91 processors. This patch also adds a global 'at91_arch_reset' callback (from system.h) into the processor-specific code to perform the reset. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 17:01:47 +08:00
extern void (*at91_arch_reset)(void);
extern int at91_extern_irq;