linux_old1/net/core/dev_mcast.c

263 lines
6.2 KiB
C
Raw Normal View History

/*
* Linux NET3: Multicast List maintenance.
*
* Authors:
* Tim Kordas <tjk@nostromo.eeap.cwru.edu>
* Richard Underwood <richard@wuzz.demon.co.uk>
*
* Stir fried together from the IP multicast and CAP patches above
* Alan Cox <Alan.Cox@linux.org>
*
* Fixes:
* Alan Cox : Update the device on a real delete
* rather than any time but...
* Alan Cox : IFF_ALLMULTI support.
* Alan Cox : New format set_multicast_list() calls.
* Gleb Natapov : Remove dev_mc_lock.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/module.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/in.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/if_ether.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
#include <net/net_namespace.h>
#include <net/ip.h>
#include <net/route.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <net/arp.h>
/*
* Device multicast list maintenance.
*
* This is used both by IP and by the user level maintenance functions.
* Unlike BSD we maintain a usage count on a given multicast address so
* that a casual user application can add/delete multicasts used by
* protocols without doing damage to the protocols when it deletes the
* entries. It also helps IP as it tracks overlapping maps.
*
* Device mc lists are changed by bh at least if IPv6 is enabled,
* so that it must be bh protected.
*
[NET]: Add netif_tx_lock Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-10 03:20:56 +08:00
* We block accesses to device mc filters with netif_tx_lock.
*/
/*
* Delete a device level multicast
*/
int dev_mc_delete(struct net_device *dev, void *addr, int alen, int glbl)
{
int err;
[NET]: Add netif_tx_lock Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-10 03:20:56 +08:00
netif_tx_lock_bh(dev);
err = __dev_addr_delete(&dev->mc_list, &dev->mc_count,
addr, alen, glbl);
if (!err) {
/*
* We have altered the list, so the card
* loaded filter is now wrong. Fix it
*/
__dev_set_rx_mode(dev);
}
[NET]: Add netif_tx_lock Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-10 03:20:56 +08:00
netif_tx_unlock_bh(dev);
return err;
}
/*
* Add a device level multicast
*/
int dev_mc_add(struct net_device *dev, void *addr, int alen, int glbl)
{
int err;
[NET]: Add netif_tx_lock Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-10 03:20:56 +08:00
netif_tx_lock_bh(dev);
err = __dev_addr_add(&dev->mc_list, &dev->mc_count, addr, alen, glbl);
if (!err)
__dev_set_rx_mode(dev);
[NET]: Add netif_tx_lock Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-10 03:20:56 +08:00
netif_tx_unlock_bh(dev);
return err;
}
/**
* dev_mc_sync - Synchronize device's multicast list to another device
* @to: destination device
* @from: source device
*
* Add newly added addresses to the destination device and release
* addresses that have no users left. The source device must be
* locked by netif_tx_lock_bh.
*
* This function is intended to be called from the dev->set_multicast_list
* function of layered software devices.
*/
int dev_mc_sync(struct net_device *to, struct net_device *from)
{
struct dev_addr_list *da, *next;
int err = 0;
netif_tx_lock_bh(to);
da = from->mc_list;
while (da != NULL) {
next = da->next;
if (!da->da_synced) {
err = __dev_addr_add(&to->mc_list, &to->mc_count,
da->da_addr, da->da_addrlen, 0);
if (err < 0)
break;
da->da_synced = 1;
da->da_users++;
} else if (da->da_users == 1) {
__dev_addr_delete(&to->mc_list, &to->mc_count,
da->da_addr, da->da_addrlen, 0);
__dev_addr_delete(&from->mc_list, &from->mc_count,
da->da_addr, da->da_addrlen, 0);
}
da = next;
}
if (!err)
__dev_set_rx_mode(to);
netif_tx_unlock_bh(to);
return err;
}
EXPORT_SYMBOL(dev_mc_sync);
/**
* dev_mc_unsync - Remove synchronized addresses from the destination
* device
* @to: destination device
* @from: source device
*
* Remove all addresses that were added to the destination device by
* dev_mc_sync(). This function is intended to be called from the
* dev->stop function of layered software devices.
*/
void dev_mc_unsync(struct net_device *to, struct net_device *from)
{
struct dev_addr_list *da, *next;
netif_tx_lock_bh(from);
netif_tx_lock_bh(to);
da = from->mc_list;
while (da != NULL) {
next = da->next;
if (!da->da_synced)
continue;
__dev_addr_delete(&to->mc_list, &to->mc_count,
da->da_addr, da->da_addrlen, 0);
da->da_synced = 0;
__dev_addr_delete(&from->mc_list, &from->mc_count,
da->da_addr, da->da_addrlen, 0);
da = next;
}
__dev_set_rx_mode(to);
netif_tx_unlock_bh(to);
netif_tx_unlock_bh(from);
}
EXPORT_SYMBOL(dev_mc_unsync);
#ifdef CONFIG_PROC_FS
static void *dev_mc_seq_start(struct seq_file *seq, loff_t *pos)
{
struct net_device *dev;
loff_t off = 0;
read_lock(&dev_base_lock);
for_each_netdev(dev) {
if (off++ == *pos)
return dev;
}
return NULL;
}
static void *dev_mc_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
++*pos;
return next_net_device((struct net_device *)v);
}
static void dev_mc_seq_stop(struct seq_file *seq, void *v)
{
read_unlock(&dev_base_lock);
}
static int dev_mc_seq_show(struct seq_file *seq, void *v)
{
struct dev_addr_list *m;
struct net_device *dev = v;
[NET]: Add netif_tx_lock Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-10 03:20:56 +08:00
netif_tx_lock_bh(dev);
for (m = dev->mc_list; m; m = m->next) {
int i;
seq_printf(seq, "%-4d %-15s %-5d %-5d ", dev->ifindex,
dev->name, m->dmi_users, m->dmi_gusers);
for (i = 0; i < m->dmi_addrlen; i++)
seq_printf(seq, "%02x", m->dmi_addr[i]);
seq_putc(seq, '\n');
}
[NET]: Add netif_tx_lock Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-10 03:20:56 +08:00
netif_tx_unlock_bh(dev);
return 0;
}
static const struct seq_operations dev_mc_seq_ops = {
.start = dev_mc_seq_start,
.next = dev_mc_seq_next,
.stop = dev_mc_seq_stop,
.show = dev_mc_seq_show,
};
static int dev_mc_seq_open(struct inode *inode, struct file *file)
{
return seq_open(file, &dev_mc_seq_ops);
}
static const struct file_operations dev_mc_seq_fops = {
.owner = THIS_MODULE,
.open = dev_mc_seq_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
#endif
void __init dev_mcast_init(void)
{
proc_net_fops_create(&init_net, "dev_mcast", 0, &dev_mc_seq_fops);
}
EXPORT_SYMBOL(dev_mc_add);
EXPORT_SYMBOL(dev_mc_delete);