linux_old1/drivers/clk/ti/gate.c

351 lines
9.1 KiB
C
Raw Normal View History

/*
* OMAP gate clock support
*
* Copyright (C) 2013 Texas Instruments, Inc.
*
* Tero Kristo <t-kristo@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/clk/ti.h>
#include "clock.h"
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk);
static const struct clk_ops omap_gate_clkdm_clk_ops = {
.init = &omap2_init_clk_clkdm,
.enable = &omap2_clkops_enable_clkdm,
.disable = &omap2_clkops_disable_clkdm,
};
static const struct clk_ops omap_gate_clk_ops = {
.init = &omap2_init_clk_clkdm,
.enable = &omap2_dflt_clk_enable,
.disable = &omap2_dflt_clk_disable,
.is_enabled = &omap2_dflt_clk_is_enabled,
};
static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = {
.init = &omap2_init_clk_clkdm,
.enable = &omap36xx_gate_clk_enable_with_hsdiv_restore,
.disable = &omap2_dflt_clk_disable,
.is_enabled = &omap2_dflt_clk_is_enabled,
};
/**
* omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering
* from HSDivider PWRDN problem Implements Errata ID: i556.
* @clk: DPLL output struct clk
*
* 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
* dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
* valueafter their respective PWRDN bits are set. Any dummy write
* (Any other value different from the Read value) to the
* corresponding CM_CLKSEL register will refresh the dividers.
*/
static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *hw)
{
struct clk_divider *parent;
struct clk_hw *parent_hw;
u32 dummy_v, orig_v;
int ret;
/* Clear PWRDN bit of HSDIVIDER */
ret = omap2_dflt_clk_enable(hw);
/* Parent is the x2 node, get parent of parent for the m2 div */
parent_hw = clk_hw_get_parent(clk_hw_get_parent(hw));
parent = to_clk_divider(parent_hw);
/* Restore the dividers */
if (!ret) {
orig_v = ti_clk_ll_ops->clk_readl(parent->reg);
dummy_v = orig_v;
/* Write any other value different from the Read value */
dummy_v ^= (1 << parent->shift);
ti_clk_ll_ops->clk_writel(dummy_v, parent->reg);
/* Write the original divider */
ti_clk_ll_ops->clk_writel(orig_v, parent->reg);
}
return ret;
}
static struct clk *_register_gate(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
u8 clk_gate_flags, const struct clk_ops *ops,
const struct clk_hw_omap_ops *hw_ops)
{
struct clk_init_data init = { NULL };
struct clk_hw_omap *clk_hw;
struct clk *clk;
clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
if (!clk_hw)
return ERR_PTR(-ENOMEM);
clk_hw->hw.init = &init;
init.name = name;
init.ops = ops;
clk_hw->enable_reg = reg;
clk_hw->enable_bit = bit_idx;
clk_hw->ops = hw_ops;
clk_hw->flags = MEMMAP_ADDRESSING | clk_gate_flags;
init.parent_names = &parent_name;
init.num_parents = 1;
init.flags = flags;
clk = ti_clk_register(NULL, &clk_hw->hw, name);
if (IS_ERR(clk))
kfree(clk_hw);
return clk;
}
clk: omap: compile legacy omap3 clocks conditionally The 'ARM: OMAP3: legacy clock data move under clk driver' patch series causes build errors when CONFIG_OMAP3 is not set: drivers/clk/ti/dpll.c: In function 'ti_clk_register_dpll': drivers/clk/ti/dpll.c:199:31: error: 'omap3_dpll_ck_ops' undeclared (first use in this function) const struct clk_ops *ops = &omap3_dpll_ck_ops; ^ drivers/clk/ti/dpll.c:199:31: note: each undeclared identifier is reported only once for each function it appears in drivers/clk/ti/dpll.c:259:10: error: 'omap3_dpll_per_ck_ops' undeclared (first use in this function) ops = &omap3_dpll_per_ck_ops; ^ drivers/built-in.o: In function `ti_clk_register_gate': drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_omap3430es2_dss_usbhost_wait' drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_am35xx_ipss_module_wait' -in.o: In function `ti_clk_register_interface': drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_hsotgusb_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_dss_usbhost_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_ssi_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_am35xx_ipss_wait' drivers/built-in.o: In function `ti_clk_register_composite': :(.text+0x3da768): undefined reference to `ti_clk_build_component_gate' In order to fix that problem, this patch makes the omap3 legacy code compiled only when both CONFIG_OMAP3 and CONFIG_ATAGS are set. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-04 00:59:32 +08:00
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_ATAGS)
struct clk *ti_clk_register_gate(struct ti_clk *setup)
{
const struct clk_ops *ops = &omap_gate_clk_ops;
const struct clk_hw_omap_ops *hw_ops = NULL;
u32 reg;
struct clk_omap_reg *reg_setup;
u32 flags = 0;
u8 clk_gate_flags = 0;
struct ti_clk_gate *gate;
gate = setup->data;
if (gate->flags & CLKF_INTERFACE)
return ti_clk_register_interface(setup);
reg_setup = (struct clk_omap_reg *)&reg;
if (gate->flags & CLKF_SET_RATE_PARENT)
flags |= CLK_SET_RATE_PARENT;
if (gate->flags & CLKF_SET_BIT_TO_DISABLE)
clk_gate_flags |= INVERT_ENABLE;
if (gate->flags & CLKF_HSDIV) {
ops = &omap_gate_clk_hsdiv_restore_ops;
hw_ops = &clkhwops_wait;
}
if (gate->flags & CLKF_DSS)
hw_ops = &clkhwops_omap3430es2_dss_usbhost_wait;
if (gate->flags & CLKF_WAIT)
hw_ops = &clkhwops_wait;
if (gate->flags & CLKF_CLKDM)
ops = &omap_gate_clkdm_clk_ops;
if (gate->flags & CLKF_AM35XX)
hw_ops = &clkhwops_am35xx_ipss_module_wait;
reg_setup->index = gate->module;
reg_setup->offset = gate->reg;
return _register_gate(NULL, setup->name, gate->parent, flags,
(void __iomem *)reg, gate->bit_shift,
clk_gate_flags, ops, hw_ops);
}
struct clk_hw *ti_clk_build_component_gate(struct ti_clk_gate *setup)
{
struct clk_hw_omap *gate;
struct clk_omap_reg *reg;
const struct clk_hw_omap_ops *ops = &clkhwops_wait;
if (!setup)
return NULL;
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate)
return ERR_PTR(-ENOMEM);
reg = (struct clk_omap_reg *)&gate->enable_reg;
reg->index = setup->module;
reg->offset = setup->reg;
gate->enable_bit = setup->bit_shift;
if (setup->flags & CLKF_NO_WAIT)
ops = NULL;
if (setup->flags & CLKF_INTERFACE)
ops = &clkhwops_iclk_wait;
gate->ops = ops;
gate->flags = MEMMAP_ADDRESSING;
return &gate->hw;
}
clk: omap: compile legacy omap3 clocks conditionally The 'ARM: OMAP3: legacy clock data move under clk driver' patch series causes build errors when CONFIG_OMAP3 is not set: drivers/clk/ti/dpll.c: In function 'ti_clk_register_dpll': drivers/clk/ti/dpll.c:199:31: error: 'omap3_dpll_ck_ops' undeclared (first use in this function) const struct clk_ops *ops = &omap3_dpll_ck_ops; ^ drivers/clk/ti/dpll.c:199:31: note: each undeclared identifier is reported only once for each function it appears in drivers/clk/ti/dpll.c:259:10: error: 'omap3_dpll_per_ck_ops' undeclared (first use in this function) ops = &omap3_dpll_per_ck_ops; ^ drivers/built-in.o: In function `ti_clk_register_gate': drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_omap3430es2_dss_usbhost_wait' drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_am35xx_ipss_module_wait' -in.o: In function `ti_clk_register_interface': drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_hsotgusb_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_dss_usbhost_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_ssi_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_am35xx_ipss_wait' drivers/built-in.o: In function `ti_clk_register_composite': :(.text+0x3da768): undefined reference to `ti_clk_build_component_gate' In order to fix that problem, this patch makes the omap3 legacy code compiled only when both CONFIG_OMAP3 and CONFIG_ATAGS are set. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-04 00:59:32 +08:00
#endif
static void __init _of_ti_gate_clk_setup(struct device_node *node,
const struct clk_ops *ops,
const struct clk_hw_omap_ops *hw_ops)
{
struct clk *clk;
const char *parent_name;
void __iomem *reg = NULL;
u8 enable_bit = 0;
u32 val;
u32 flags = 0;
u8 clk_gate_flags = 0;
if (ops != &omap_gate_clkdm_clk_ops) {
reg = ti_clk_get_reg_addr(node, 0);
if (IS_ERR(reg))
return;
if (!of_property_read_u32(node, "ti,bit-shift", &val))
enable_bit = val;
}
if (of_clk_get_parent_count(node) != 1) {
pr_err("%s must have 1 parent\n", node->name);
return;
}
parent_name = of_clk_get_parent_name(node, 0);
if (of_property_read_bool(node, "ti,set-rate-parent"))
flags |= CLK_SET_RATE_PARENT;
if (of_property_read_bool(node, "ti,set-bit-to-disable"))
clk_gate_flags |= INVERT_ENABLE;
clk = _register_gate(NULL, node->name, parent_name, flags, reg,
enable_bit, clk_gate_flags, ops, hw_ops);
if (!IS_ERR(clk))
of_clk_add_provider(node, of_clk_src_simple_get, clk);
}
static void __init
_of_ti_composite_gate_clk_setup(struct device_node *node,
const struct clk_hw_omap_ops *hw_ops)
{
struct clk_hw_omap *gate;
u32 val = 0;
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate)
return;
gate->enable_reg = ti_clk_get_reg_addr(node, 0);
if (IS_ERR(gate->enable_reg))
goto cleanup;
of_property_read_u32(node, "ti,bit-shift", &val);
gate->enable_bit = val;
gate->ops = hw_ops;
gate->flags = MEMMAP_ADDRESSING;
if (!ti_clk_add_component(node, &gate->hw, CLK_COMPONENT_TYPE_GATE))
return;
cleanup:
kfree(gate);
}
static void __init
of_ti_composite_no_wait_gate_clk_setup(struct device_node *node)
{
_of_ti_composite_gate_clk_setup(node, NULL);
}
CLK_OF_DECLARE(ti_composite_no_wait_gate_clk, "ti,composite-no-wait-gate-clock",
of_ti_composite_no_wait_gate_clk_setup);
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
static void __init of_ti_composite_interface_clk_setup(struct device_node *node)
{
_of_ti_composite_gate_clk_setup(node, &clkhwops_iclk_wait);
}
CLK_OF_DECLARE(ti_composite_interface_clk, "ti,composite-interface-clock",
of_ti_composite_interface_clk_setup);
#endif
static void __init of_ti_composite_gate_clk_setup(struct device_node *node)
{
_of_ti_composite_gate_clk_setup(node, &clkhwops_wait);
}
CLK_OF_DECLARE(ti_composite_gate_clk, "ti,composite-gate-clock",
of_ti_composite_gate_clk_setup);
static void __init of_ti_clkdm_gate_clk_setup(struct device_node *node)
{
_of_ti_gate_clk_setup(node, &omap_gate_clkdm_clk_ops, NULL);
}
CLK_OF_DECLARE(ti_clkdm_gate_clk, "ti,clkdm-gate-clock",
of_ti_clkdm_gate_clk_setup);
static void __init of_ti_hsdiv_gate_clk_setup(struct device_node *node)
{
_of_ti_gate_clk_setup(node, &omap_gate_clk_hsdiv_restore_ops,
&clkhwops_wait);
}
CLK_OF_DECLARE(ti_hsdiv_gate_clk, "ti,hsdiv-gate-clock",
of_ti_hsdiv_gate_clk_setup);
static void __init of_ti_gate_clk_setup(struct device_node *node)
{
_of_ti_gate_clk_setup(node, &omap_gate_clk_ops, NULL);
}
CLK_OF_DECLARE(ti_gate_clk, "ti,gate-clock", of_ti_gate_clk_setup);
static void __init of_ti_wait_gate_clk_setup(struct device_node *node)
{
_of_ti_gate_clk_setup(node, &omap_gate_clk_ops, &clkhwops_wait);
}
CLK_OF_DECLARE(ti_wait_gate_clk, "ti,wait-gate-clock",
of_ti_wait_gate_clk_setup);
#ifdef CONFIG_ARCH_OMAP3
static void __init of_ti_am35xx_gate_clk_setup(struct device_node *node)
{
_of_ti_gate_clk_setup(node, &omap_gate_clk_ops,
&clkhwops_am35xx_ipss_module_wait);
}
CLK_OF_DECLARE(ti_am35xx_gate_clk, "ti,am35xx-gate-clock",
of_ti_am35xx_gate_clk_setup);
static void __init of_ti_dss_gate_clk_setup(struct device_node *node)
{
_of_ti_gate_clk_setup(node, &omap_gate_clk_ops,
&clkhwops_omap3430es2_dss_usbhost_wait);
}
CLK_OF_DECLARE(ti_dss_gate_clk, "ti,dss-gate-clock",
of_ti_dss_gate_clk_setup);
#endif