linux_old1/drivers/acpi/nvs.c

213 lines
4.6 KiB
C
Raw Normal View History

/*
* nvs.c - Routines for saving and restoring ACPI NVS memory region
*
* Copyright (C) 2008-2011 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
*
* This file is released under the GPLv2.
*/
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mm.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/acpi.h>
#include "internal.h"
/* ACPI NVS regions, APEI may use it */
struct nvs_region {
__u64 phys_start;
__u64 size;
struct list_head node;
};
static LIST_HEAD(nvs_region_list);
#ifdef CONFIG_ACPI_SLEEP
static int suspend_nvs_register(unsigned long start, unsigned long size);
#else
static inline int suspend_nvs_register(unsigned long a, unsigned long b)
{
return 0;
}
#endif
int acpi_nvs_register(__u64 start, __u64 size)
{
struct nvs_region *region;
region = kmalloc(sizeof(*region), GFP_KERNEL);
if (!region)
return -ENOMEM;
region->phys_start = start;
region->size = size;
list_add_tail(&region->node, &nvs_region_list);
return suspend_nvs_register(start, size);
}
int acpi_nvs_for_each_region(int (*func)(__u64 start, __u64 size, void *data),
void *data)
{
int rc;
struct nvs_region *region;
list_for_each_entry(region, &nvs_region_list, node) {
rc = func(region->phys_start, region->size, data);
if (rc)
return rc;
}
return 0;
}
#ifdef CONFIG_ACPI_SLEEP
/*
* Platforms, like ACPI, may want us to save some memory used by them during
* suspend and to restore the contents of this memory during the subsequent
* resume. The code below implements a mechanism allowing us to do that.
*/
struct nvs_page {
unsigned long phys_start;
unsigned int size;
void *kaddr;
void *data;
bool unmap;
struct list_head node;
};
static LIST_HEAD(nvs_list);
/**
* suspend_nvs_register - register platform NVS memory region to save
* @start - physical address of the region
* @size - size of the region
*
* The NVS region need not be page-aligned (both ends) and we arrange
* things so that the data from page-aligned addresses in this region will
* be copied into separate RAM pages.
*/
static int suspend_nvs_register(unsigned long start, unsigned long size)
{
struct nvs_page *entry, *next;
pr_info("PM: Registering ACPI NVS region [mem %#010lx-%#010lx] (%ld bytes)\n",
start, start + size - 1, size);
while (size > 0) {
unsigned int nr_bytes;
entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL);
if (!entry)
goto Error;
list_add_tail(&entry->node, &nvs_list);
entry->phys_start = start;
nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK);
entry->size = (size < nr_bytes) ? size : nr_bytes;
start += entry->size;
size -= entry->size;
}
return 0;
Error:
list_for_each_entry_safe(entry, next, &nvs_list, node) {
list_del(&entry->node);
kfree(entry);
}
return -ENOMEM;
}
/**
* suspend_nvs_free - free data pages allocated for saving NVS regions
*/
void suspend_nvs_free(void)
{
struct nvs_page *entry;
list_for_each_entry(entry, &nvs_list, node)
if (entry->data) {
free_page((unsigned long)entry->data);
entry->data = NULL;
if (entry->kaddr) {
if (entry->unmap) {
iounmap(entry->kaddr);
entry->unmap = false;
} else {
ACPI: Clean up acpi_os_map/unmap_memory() to eliminate __iomem. ACPICA doesn't include protections around address space checking, Linux build tests always complain increased sparse warnings around ACPICA internal acpi_os_map/unmap_memory() invocations. This patch tries to fix this issue permanently. There are 2 choices left for us to solve this issue: 1. Add __iomem address space awareness into ACPICA. 2. Remove sparse checker of __iomem from ACPICA source code. This patch chooses solution 2, because: 1. Most of the acpi_os_map/unmap_memory() invocations are used for ACPICA. table mappings, which in fact are not IO addresses. 2. The only IO addresses usage is for "system memory space" mapping code in: drivers/acpi/acpica/exregion.c drivers/acpi/acpica/evrgnini.c drivers/acpi/acpica/exregion.c The mapped address is accessed in the handler of "system memory space" - acpi_ex_system_memory_space_handler(). This function in fact can be changed to invoke acpi_os_read/write_memory() so that __iomem can always be type-casted in the OSL layer. According to the above investigation, we drew the following conclusion: It is not a good idea to introduce __iomem address space awareness into ACPICA mostly in order to protect non-IO addresses. We can simply remove __iomem for acpi_os_map/unmap_memory() to remove __iomem checker for ACPICA code. Then we need to enforce external usages to invoke other APIs that are aware of __iomem address space. The external usages are: drivers/acpi/apei/einj.c drivers/acpi/acpi_extlog.c drivers/char/tpm/tpm_acpi.c drivers/acpi/nvs.c This patch thus performs cleanups in this way: 1. Add acpi_os_map/unmap_iomem() to be invoked by non-ACPICA code. 2. Remove __iomem from acpi_os_map/unmap_memory(). Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-20 15:39:41 +08:00
acpi_os_unmap_iomem(entry->kaddr,
entry->size);
}
entry->kaddr = NULL;
}
}
}
/**
* suspend_nvs_alloc - allocate memory necessary for saving NVS regions
*/
int suspend_nvs_alloc(void)
{
struct nvs_page *entry;
list_for_each_entry(entry, &nvs_list, node) {
entry->data = (void *)__get_free_page(GFP_KERNEL);
if (!entry->data) {
suspend_nvs_free();
return -ENOMEM;
}
}
return 0;
}
/**
* suspend_nvs_save - save NVS memory regions
*/
int suspend_nvs_save(void)
{
struct nvs_page *entry;
printk(KERN_INFO "PM: Saving platform NVS memory\n");
list_for_each_entry(entry, &nvs_list, node)
if (entry->data) {
unsigned long phys = entry->phys_start;
unsigned int size = entry->size;
entry->kaddr = acpi_os_get_iomem(phys, size);
if (!entry->kaddr) {
entry->kaddr = acpi_os_ioremap(phys, size);
entry->unmap = !!entry->kaddr;
}
if (!entry->kaddr) {
suspend_nvs_free();
return -ENOMEM;
}
memcpy(entry->data, entry->kaddr, entry->size);
}
return 0;
}
/**
* suspend_nvs_restore - restore NVS memory regions
*
* This function is going to be called with interrupts disabled, so it
* cannot iounmap the virtual addresses used to access the NVS region.
*/
void suspend_nvs_restore(void)
{
struct nvs_page *entry;
printk(KERN_INFO "PM: Restoring platform NVS memory\n");
list_for_each_entry(entry, &nvs_list, node)
if (entry->data)
memcpy(entry->kaddr, entry->data, entry->size);
}
#endif