linux_old1/arch/x86/mm/ident_map.c

136 lines
3.1 KiB
C
Raw Normal View History

/*
* Helper routines for building identity mapping page tables. This is
* included by both the compressed kernel and the regular kernel.
*/
static void ident_pmd_init(struct x86_mapping_info *info, pmd_t *pmd_page,
unsigned long addr, unsigned long end)
{
addr &= PMD_MASK;
for (; addr < end; addr += PMD_SIZE) {
pmd_t *pmd = pmd_page + pmd_index(addr);
if (pmd_present(*pmd))
continue;
x86/mm: Add support for gbpages to kernel_ident_mapping_init() Kernel identity mappings on x86-64 kernels are created in two ways: by the early x86 boot code, or by kernel_ident_mapping_init(). Native kernels (which is the dominant usecase) use the former, but the kexec and the hibernation code uses kernel_ident_mapping_init(). There's a subtle difference between these two ways of how identity mappings are created, the current kernel_ident_mapping_init() code creates identity mappings always using 2MB page(PMD level) - while the native kernel boot path also utilizes gbpages where available. This difference is suboptimal both for performance and for memory usage: kernel_ident_mapping_init() needs to allocate pages for the page tables when creating the new identity mappings. This patch adds 1GB page(PUD level) support to kernel_ident_mapping_init() to address these concerns. The primary advantage would be better TLB coverage/performance, because we'd utilize 1GB TLBs instead of 2MB ones. It is also useful for machines with large number of memory to save paging structure allocations(around 4MB/TB using 2MB page) when setting identity mappings for all the memory, after using 1GB page it will consume only 8KB/TB. ( Note that this change alone does not activate gbpages in kexec, we are doing that in a separate patch. ) Signed-off-by: Xunlei Pang <xlpang@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: akpm@linux-foundation.org Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/1493862171-8799-1-git-send-email-xlpang@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-04 09:42:50 +08:00
set_pmd(pmd, __pmd((addr - info->offset) | info->page_flag));
}
}
static int ident_pud_init(struct x86_mapping_info *info, pud_t *pud_page,
unsigned long addr, unsigned long end)
{
unsigned long next;
for (; addr < end; addr = next) {
pud_t *pud = pud_page + pud_index(addr);
pmd_t *pmd;
next = (addr & PUD_MASK) + PUD_SIZE;
if (next > end)
next = end;
x86/mm: Add support for gbpages to kernel_ident_mapping_init() Kernel identity mappings on x86-64 kernels are created in two ways: by the early x86 boot code, or by kernel_ident_mapping_init(). Native kernels (which is the dominant usecase) use the former, but the kexec and the hibernation code uses kernel_ident_mapping_init(). There's a subtle difference between these two ways of how identity mappings are created, the current kernel_ident_mapping_init() code creates identity mappings always using 2MB page(PMD level) - while the native kernel boot path also utilizes gbpages where available. This difference is suboptimal both for performance and for memory usage: kernel_ident_mapping_init() needs to allocate pages for the page tables when creating the new identity mappings. This patch adds 1GB page(PUD level) support to kernel_ident_mapping_init() to address these concerns. The primary advantage would be better TLB coverage/performance, because we'd utilize 1GB TLBs instead of 2MB ones. It is also useful for machines with large number of memory to save paging structure allocations(around 4MB/TB using 2MB page) when setting identity mappings for all the memory, after using 1GB page it will consume only 8KB/TB. ( Note that this change alone does not activate gbpages in kexec, we are doing that in a separate patch. ) Signed-off-by: Xunlei Pang <xlpang@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: akpm@linux-foundation.org Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/1493862171-8799-1-git-send-email-xlpang@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-04 09:42:50 +08:00
if (info->direct_gbpages) {
pud_t pudval;
if (pud_present(*pud))
continue;
addr &= PUD_MASK;
pudval = __pud((addr - info->offset) | info->page_flag);
set_pud(pud, pudval);
continue;
}
if (pud_present(*pud)) {
pmd = pmd_offset(pud, 0);
ident_pmd_init(info, pmd, addr, next);
continue;
}
pmd = (pmd_t *)info->alloc_pgt_page(info->context);
if (!pmd)
return -ENOMEM;
ident_pmd_init(info, pmd, addr, next);
x86/mm, kexec: Allow kexec to be used with SME Provide support so that kexec can be used to boot a kernel when SME is enabled. Support is needed to allocate pages for kexec without encryption. This is needed in order to be able to reboot in the kernel in the same manner as originally booted. Additionally, when shutting down all of the CPUs we need to be sure to flush the caches and then halt. This is needed when booting from a state where SME was not active into a state where SME is active (or vice-versa). Without these steps, it is possible for cache lines to exist for the same physical location but tagged both with and without the encryption bit. This can cause random memory corruption when caches are flushed depending on which cacheline is written last. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: <kexec@lists.infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b95ff075db3e7cd545313f2fb609a49619a09625.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18 05:10:28 +08:00
set_pud(pud, __pud(__pa(pmd) | info->kernpg_flag));
}
return 0;
}
static int ident_p4d_init(struct x86_mapping_info *info, p4d_t *p4d_page,
unsigned long addr, unsigned long end)
{
unsigned long next;
for (; addr < end; addr = next) {
p4d_t *p4d = p4d_page + p4d_index(addr);
pud_t *pud;
next = (addr & P4D_MASK) + P4D_SIZE;
if (next > end)
next = end;
if (p4d_present(*p4d)) {
pud = pud_offset(p4d, 0);
ident_pud_init(info, pud, addr, next);
continue;
}
pud = (pud_t *)info->alloc_pgt_page(info->context);
if (!pud)
return -ENOMEM;
ident_pud_init(info, pud, addr, next);
x86/mm, kexec: Allow kexec to be used with SME Provide support so that kexec can be used to boot a kernel when SME is enabled. Support is needed to allocate pages for kexec without encryption. This is needed in order to be able to reboot in the kernel in the same manner as originally booted. Additionally, when shutting down all of the CPUs we need to be sure to flush the caches and then halt. This is needed when booting from a state where SME was not active into a state where SME is active (or vice-versa). Without these steps, it is possible for cache lines to exist for the same physical location but tagged both with and without the encryption bit. This can cause random memory corruption when caches are flushed depending on which cacheline is written last. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: <kexec@lists.infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b95ff075db3e7cd545313f2fb609a49619a09625.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18 05:10:28 +08:00
set_p4d(p4d, __p4d(__pa(pud) | info->kernpg_flag));
}
return 0;
}
int kernel_ident_mapping_init(struct x86_mapping_info *info, pgd_t *pgd_page,
unsigned long pstart, unsigned long pend)
{
unsigned long addr = pstart + info->offset;
unsigned long end = pend + info->offset;
unsigned long next;
int result;
x86/mm, kexec: Allow kexec to be used with SME Provide support so that kexec can be used to boot a kernel when SME is enabled. Support is needed to allocate pages for kexec without encryption. This is needed in order to be able to reboot in the kernel in the same manner as originally booted. Additionally, when shutting down all of the CPUs we need to be sure to flush the caches and then halt. This is needed when booting from a state where SME was not active into a state where SME is active (or vice-versa). Without these steps, it is possible for cache lines to exist for the same physical location but tagged both with and without the encryption bit. This can cause random memory corruption when caches are flushed depending on which cacheline is written last. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: <kexec@lists.infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b95ff075db3e7cd545313f2fb609a49619a09625.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18 05:10:28 +08:00
/* Set the default pagetable flags if not supplied */
if (!info->kernpg_flag)
info->kernpg_flag = _KERNPG_TABLE;
for (; addr < end; addr = next) {
pgd_t *pgd = pgd_page + pgd_index(addr);
p4d_t *p4d;
next = (addr & PGDIR_MASK) + PGDIR_SIZE;
if (next > end)
next = end;
if (pgd_present(*pgd)) {
p4d = p4d_offset(pgd, 0);
result = ident_p4d_init(info, p4d, addr, next);
if (result)
return result;
continue;
}
p4d = (p4d_t *)info->alloc_pgt_page(info->context);
if (!p4d)
return -ENOMEM;
result = ident_p4d_init(info, p4d, addr, next);
if (result)
return result;
if (IS_ENABLED(CONFIG_X86_5LEVEL)) {
x86/mm, kexec: Allow kexec to be used with SME Provide support so that kexec can be used to boot a kernel when SME is enabled. Support is needed to allocate pages for kexec without encryption. This is needed in order to be able to reboot in the kernel in the same manner as originally booted. Additionally, when shutting down all of the CPUs we need to be sure to flush the caches and then halt. This is needed when booting from a state where SME was not active into a state where SME is active (or vice-versa). Without these steps, it is possible for cache lines to exist for the same physical location but tagged both with and without the encryption bit. This can cause random memory corruption when caches are flushed depending on which cacheline is written last. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: <kexec@lists.infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b95ff075db3e7cd545313f2fb609a49619a09625.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18 05:10:28 +08:00
set_pgd(pgd, __pgd(__pa(p4d) | info->kernpg_flag));
} else {
/*
* With p4d folded, pgd is equal to p4d.
* The pgd entry has to point to the pud page table in this case.
*/
pud_t *pud = pud_offset(p4d, 0);
x86/mm, kexec: Allow kexec to be used with SME Provide support so that kexec can be used to boot a kernel when SME is enabled. Support is needed to allocate pages for kexec without encryption. This is needed in order to be able to reboot in the kernel in the same manner as originally booted. Additionally, when shutting down all of the CPUs we need to be sure to flush the caches and then halt. This is needed when booting from a state where SME was not active into a state where SME is active (or vice-versa). Without these steps, it is possible for cache lines to exist for the same physical location but tagged both with and without the encryption bit. This can cause random memory corruption when caches are flushed depending on which cacheline is written last. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: <kexec@lists.infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b95ff075db3e7cd545313f2fb609a49619a09625.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18 05:10:28 +08:00
set_pgd(pgd, __pgd(__pa(pud) | info->kernpg_flag));
}
}
return 0;
}