linux_old1/arch/mips/mti-malta/malta-int.c

740 lines
19 KiB
C
Raw Normal View History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
* Copyright (C) 2001 Ralf Baechle
* Copyright (C) 2013 Imagination Technologies Ltd.
*
* Routines for generic manipulation of the interrupts found on the MIPS
* Malta board. The interrupt controller is located in the South Bridge
* a PIIX4 device with two internal 82C95 interrupt controllers.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel_stat.h>
#include <linux/kernel.h>
#include <linux/random.h>
#include <asm/traps.h>
#include <asm/i8259.h>
#include <asm/irq_cpu.h>
#include <asm/irq_regs.h>
#include <asm/mips-cm.h>
#include <asm/mips-boards/malta.h>
#include <asm/mips-boards/maltaint.h>
#include <asm/gt64120.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/msc01_pci.h>
#include <asm/msc01_ic.h>
#include <asm/gic.h>
#include <asm/setup.h>
#include <asm/rtlx.h>
static unsigned long _msc01_biu_base;
static unsigned int ipi_map[NR_CPUS];
static DEFINE_RAW_SPINLOCK(mips_irq_lock);
static inline int mips_pcibios_iack(void)
{
int irq;
/*
* Determine highest priority pending interrupt by performing
* a PCI Interrupt Acknowledge cycle.
*/
switch (mips_revision_sconid) {
case MIPS_REVISION_SCON_SOCIT:
case MIPS_REVISION_SCON_ROCIT:
case MIPS_REVISION_SCON_SOCITSC:
case MIPS_REVISION_SCON_SOCITSCP:
MSC_READ(MSC01_PCI_IACK, irq);
irq &= 0xff;
break;
case MIPS_REVISION_SCON_GT64120:
irq = GT_READ(GT_PCI0_IACK_OFS);
irq &= 0xff;
break;
case MIPS_REVISION_SCON_BONITO:
/* The following will generate a PCI IACK cycle on the
* Bonito controller. It's a little bit kludgy, but it
* was the easiest way to implement it in hardware at
* the given time.
*/
BONITO_PCIMAP_CFG = 0x20000;
/* Flush Bonito register block */
(void) BONITO_PCIMAP_CFG;
iob(); /* sync */
irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg);
iob(); /* sync */
irq &= 0xff;
BONITO_PCIMAP_CFG = 0;
break;
default:
pr_emerg("Unknown system controller.\n");
return -1;
}
return irq;
}
static inline int get_int(void)
{
unsigned long flags;
int irq;
raw_spin_lock_irqsave(&mips_irq_lock, flags);
irq = mips_pcibios_iack();
/*
* The only way we can decide if an interrupt is spurious
* is by checking the 8259 registers. This needs a spinlock
* on an SMP system, so leave it up to the generic code...
*/
raw_spin_unlock_irqrestore(&mips_irq_lock, flags);
return irq;
}
static void malta_hw0_irqdispatch(void)
{
int irq;
irq = get_int();
if (irq < 0) {
/* interrupt has already been cleared */
return;
}
do_IRQ(MALTA_INT_BASE + irq);
#ifdef CONFIG_MIPS_VPE_APSP_API_MT
if (aprp_hook)
aprp_hook();
#endif
}
static void malta_ipi_irqdispatch(void)
{
int irq;
if (gic_compare_int())
do_IRQ(MIPS_GIC_IRQ_BASE);
irq = gic_get_int();
if (irq < 0)
return; /* interrupt has already been cleared */
do_IRQ(MIPS_GIC_IRQ_BASE + irq);
}
static void corehi_irqdispatch(void)
{
unsigned int intedge, intsteer, pcicmd, pcibadaddr;
unsigned int pcimstat, intisr, inten, intpol;
unsigned int intrcause, datalo, datahi;
struct pt_regs *regs = get_irq_regs();
pr_emerg("CoreHI interrupt, shouldn't happen, we die here!\n");
pr_emerg("epc : %08lx\nStatus: %08lx\n"
"Cause : %08lx\nbadVaddr : %08lx\n",
regs->cp0_epc, regs->cp0_status,
regs->cp0_cause, regs->cp0_badvaddr);
/* Read all the registers and then print them as there is a
problem with interspersed printk's upsetting the Bonito controller.
Do it for the others too.
*/
switch (mips_revision_sconid) {
case MIPS_REVISION_SCON_SOCIT:
case MIPS_REVISION_SCON_ROCIT:
case MIPS_REVISION_SCON_SOCITSC:
case MIPS_REVISION_SCON_SOCITSCP:
ll_msc_irq();
break;
case MIPS_REVISION_SCON_GT64120:
intrcause = GT_READ(GT_INTRCAUSE_OFS);
datalo = GT_READ(GT_CPUERR_ADDRLO_OFS);
datahi = GT_READ(GT_CPUERR_ADDRHI_OFS);
pr_emerg("GT_INTRCAUSE = %08x\n", intrcause);
pr_emerg("GT_CPUERR_ADDR = %02x%08x\n",
datahi, datalo);
break;
case MIPS_REVISION_SCON_BONITO:
pcibadaddr = BONITO_PCIBADADDR;
pcimstat = BONITO_PCIMSTAT;
intisr = BONITO_INTISR;
inten = BONITO_INTEN;
intpol = BONITO_INTPOL;
intedge = BONITO_INTEDGE;
intsteer = BONITO_INTSTEER;
pcicmd = BONITO_PCICMD;
pr_emerg("BONITO_INTISR = %08x\n", intisr);
pr_emerg("BONITO_INTEN = %08x\n", inten);
pr_emerg("BONITO_INTPOL = %08x\n", intpol);
pr_emerg("BONITO_INTEDGE = %08x\n", intedge);
pr_emerg("BONITO_INTSTEER = %08x\n", intsteer);
pr_emerg("BONITO_PCICMD = %08x\n", pcicmd);
pr_emerg("BONITO_PCIBADADDR = %08x\n", pcibadaddr);
pr_emerg("BONITO_PCIMSTAT = %08x\n", pcimstat);
break;
}
die("CoreHi interrupt", regs);
}
static inline int clz(unsigned long x)
{
__asm__(
" .set push \n"
" .set mips32 \n"
" clz %0, %1 \n"
" .set pop \n"
: "=r" (x)
: "r" (x));
return x;
}
/*
* Version of ffs that only looks at bits 12..15.
*/
static inline unsigned int irq_ffs(unsigned int pending)
{
#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
return -clz(pending) + 31 - CAUSEB_IP;
#else
unsigned int a0 = 7;
unsigned int t0;
t0 = pending & 0xf000;
t0 = t0 < 1;
t0 = t0 << 2;
a0 = a0 - t0;
pending = pending << t0;
t0 = pending & 0xc000;
t0 = t0 < 1;
t0 = t0 << 1;
a0 = a0 - t0;
pending = pending << t0;
t0 = pending & 0x8000;
t0 = t0 < 1;
/* t0 = t0 << 2; */
a0 = a0 - t0;
/* pending = pending << t0; */
return a0;
#endif
}
/*
* IRQs on the Malta board look basically (barring software IRQs which we
* don't use at all and all external interrupt sources are combined together
* on hardware interrupt 0 (MIPS IRQ 2)) like:
*
* MIPS IRQ Source
* -------- ------
* 0 Software (ignored)
* 1 Software (ignored)
* 2 Combined hardware interrupt (hw0)
* 3 Hardware (ignored)
* 4 Hardware (ignored)
* 5 Hardware (ignored)
* 6 Hardware (ignored)
* 7 R4k timer (what we use)
*
* We handle the IRQ according to _our_ priority which is:
*
* Highest ---- R4k Timer
* Lowest ---- Combined hardware interrupt
*
* then we just return, if multiple IRQs are pending then we will just take
* another exception, big deal.
*/
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
int irq;
MIPS: Malta: Don't crash on spurious interrupt. 48d480b0bde794781fcae9501fb043c1bac0e523 [[MIPS] Malta: Fix off by one bug in interrupt handler.] did not take in account that irq_ffs() will also return 0 if for some reason the set of pending interrupts happens to be empty. This is trivial to trigger with a RM5261 CPU module running a 64-bit kernel and results in something like the following: CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff801772d0, ra == ffffffff8017ad24 Oops[#1]: Cpu 0 $ 0 : 0000000000000000 ffffffff9000a4e0 ffffffff9000a4e0 ffffffff9000a4e0 $ 4 : ffffffff80592be0 0000000000000000 00000000000000d6 ffffffff80322ed0 $ 8 : ffffffff805fe538 0000000000000000 ffffffff9000a4e0 ffffffff80590000 $12 : 00000000000000d6 0000000000000000 ffffffff80600000 ffffffff805fe538 $16 : 0000000000000000 0000000000000010 ffffffff80592be0 0000000000000010 $20 : 0000000000000000 0000000000500001 0000000000000000 ffffffff8051e078 $24 : 0000000000000028 ffffffff803226e8 $28 : 9800000003828000 980000000382b900 ffffffff8051e060 ffffffff8017ad24 Hi : 0000000000000000 Lo : 0000006388974000 epc : ffffffff801772d0 handle_irq_event_percpu+0x70/0x2f0 Not tainted ra : ffffffff8017ad24 handle_percpu_irq+0x54/0x88 Status: 9000a4e2 KX SX UX KERNEL EXL Cause : 00808008 BadVA : 0000000000000000 PrId : 000028a0 (Nevada) Modules linked in: Process init (pid: 1, threadinfo=9800000003828000, task=9800000003827968, tls=0000000077087490) Stack : ffffffff80592be0 ffffffff8058d248 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ffffffff805a0000 0000000000000882 9800000003b89000 ffffffff8017ad24 00000000000000d5 0000000000000010 ffffffff9000a4e1 ffffffff801769f4 ffffffff9000a4e0 ffffffff801037f8 0000000000000000 ffffffff80101c44 0000000000000000 ffffffff9000a4e0 0000000000000000 9000000018000000 90000000180003f9 0000000000000001 0000000000000000 00000000000000ff 0000000000000018 0000000000000001 0000000000000001 00000000003fffff 0000000000000020 ffffffff802cf7ac ffffffff80208918 000000007fdadf08 ffffffff80612d88 ffffffff9000a4e1 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ... Call Trace: [<ffffffff801772d0>] handle_irq_event_percpu+0x70/0x2f0 [<ffffffff8017ad24>] handle_percpu_irq+0x54/0x88 [<ffffffff801769f4>] generic_handle_irq+0x44/0x60 [<ffffffff801037f8>] do_IRQ+0x48/0x70 [<ffffffff80101c44>] ret_from_irq+0x0/0x4 [<ffffffff80326170>] serial8250_startup+0x310/0x870 [<ffffffff8032175c>] uart_startup.part.7+0x9c/0x330 [<ffffffff80321b4c>] uart_open+0x15c/0x1b0 [<ffffffff80302034>] tty_open+0x1fc/0x720 [<ffffffff801bffac>] chrdev_open+0x7c/0x180 [<ffffffff801b9ab8>] do_dentry_open.isra.14+0x288/0x390 [<ffffffff801bac5c>] nameidata_to_filp+0x5c/0xc0 [<ffffffff801ca700>] do_last.isra.33+0x330/0x8f0 [<ffffffff801caf3c>] path_openat+0xbc/0x440 [<ffffffff801cb3c8>] do_filp_open+0x38/0xa8 [<ffffffff801bade4>] do_sys_open+0x124/0x218 [<ffffffff80110538>] handle_sys+0x118/0x13c Code: 02d5a825 12800012 02a0b02d <de820000> de850008 0040f809 0220202d 0040a82d 40026000 ---[ end trace 5d8e7b9a86badd2d ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-09-17 07:23:21 +08:00
if (unlikely(!pending)) {
spurious_interrupt();
return;
}
irq = irq_ffs(pending);
if (irq == MIPSCPU_INT_I8259A)
malta_hw0_irqdispatch();
else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()]))
malta_ipi_irqdispatch();
else
MIPS: Malta: Don't crash on spurious interrupt. 48d480b0bde794781fcae9501fb043c1bac0e523 [[MIPS] Malta: Fix off by one bug in interrupt handler.] did not take in account that irq_ffs() will also return 0 if for some reason the set of pending interrupts happens to be empty. This is trivial to trigger with a RM5261 CPU module running a 64-bit kernel and results in something like the following: CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff801772d0, ra == ffffffff8017ad24 Oops[#1]: Cpu 0 $ 0 : 0000000000000000 ffffffff9000a4e0 ffffffff9000a4e0 ffffffff9000a4e0 $ 4 : ffffffff80592be0 0000000000000000 00000000000000d6 ffffffff80322ed0 $ 8 : ffffffff805fe538 0000000000000000 ffffffff9000a4e0 ffffffff80590000 $12 : 00000000000000d6 0000000000000000 ffffffff80600000 ffffffff805fe538 $16 : 0000000000000000 0000000000000010 ffffffff80592be0 0000000000000010 $20 : 0000000000000000 0000000000500001 0000000000000000 ffffffff8051e078 $24 : 0000000000000028 ffffffff803226e8 $28 : 9800000003828000 980000000382b900 ffffffff8051e060 ffffffff8017ad24 Hi : 0000000000000000 Lo : 0000006388974000 epc : ffffffff801772d0 handle_irq_event_percpu+0x70/0x2f0 Not tainted ra : ffffffff8017ad24 handle_percpu_irq+0x54/0x88 Status: 9000a4e2 KX SX UX KERNEL EXL Cause : 00808008 BadVA : 0000000000000000 PrId : 000028a0 (Nevada) Modules linked in: Process init (pid: 1, threadinfo=9800000003828000, task=9800000003827968, tls=0000000077087490) Stack : ffffffff80592be0 ffffffff8058d248 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ffffffff805a0000 0000000000000882 9800000003b89000 ffffffff8017ad24 00000000000000d5 0000000000000010 ffffffff9000a4e1 ffffffff801769f4 ffffffff9000a4e0 ffffffff801037f8 0000000000000000 ffffffff80101c44 0000000000000000 ffffffff9000a4e0 0000000000000000 9000000018000000 90000000180003f9 0000000000000001 0000000000000000 00000000000000ff 0000000000000018 0000000000000001 0000000000000001 00000000003fffff 0000000000000020 ffffffff802cf7ac ffffffff80208918 000000007fdadf08 ffffffff80612d88 ffffffff9000a4e1 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ... Call Trace: [<ffffffff801772d0>] handle_irq_event_percpu+0x70/0x2f0 [<ffffffff8017ad24>] handle_percpu_irq+0x54/0x88 [<ffffffff801769f4>] generic_handle_irq+0x44/0x60 [<ffffffff801037f8>] do_IRQ+0x48/0x70 [<ffffffff80101c44>] ret_from_irq+0x0/0x4 [<ffffffff80326170>] serial8250_startup+0x310/0x870 [<ffffffff8032175c>] uart_startup.part.7+0x9c/0x330 [<ffffffff80321b4c>] uart_open+0x15c/0x1b0 [<ffffffff80302034>] tty_open+0x1fc/0x720 [<ffffffff801bffac>] chrdev_open+0x7c/0x180 [<ffffffff801b9ab8>] do_dentry_open.isra.14+0x288/0x390 [<ffffffff801bac5c>] nameidata_to_filp+0x5c/0xc0 [<ffffffff801ca700>] do_last.isra.33+0x330/0x8f0 [<ffffffff801caf3c>] path_openat+0xbc/0x440 [<ffffffff801cb3c8>] do_filp_open+0x38/0xa8 [<ffffffff801bade4>] do_sys_open+0x124/0x218 [<ffffffff80110538>] handle_sys+0x118/0x13c Code: 02d5a825 12800012 02a0b02d <de820000> de850008 0040f809 0220202d 0040a82d 40026000 ---[ end trace 5d8e7b9a86badd2d ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-09-17 07:23:21 +08:00
do_IRQ(MIPS_CPU_IRQ_BASE + irq);
}
#ifdef CONFIG_MIPS_MT_SMP
#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */
#define C_RESCHED C_SW0
#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for resched */
#define C_CALL C_SW1
static int cpu_ipi_resched_irq, cpu_ipi_call_irq;
static void ipi_resched_dispatch(void)
{
do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
}
static void ipi_call_dispatch(void)
{
do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
}
#endif /* CONFIG_MIPS_MT_SMP */
#ifdef CONFIG_MIPS_GIC_IPI
#define GIC_MIPS_CPU_IPI_RESCHED_IRQ 3
#define GIC_MIPS_CPU_IPI_CALL_IRQ 4
static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
{
#ifdef CONFIG_MIPS_VPE_APSP_API_CMP
if (aprp_hook)
aprp_hook();
#endif
scheduler_ipi();
return IRQ_HANDLED;
}
static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
{
smp_call_function_interrupt();
return IRQ_HANDLED;
}
static struct irqaction irq_resched = {
.handler = ipi_resched_interrupt,
.flags = IRQF_PERCPU,
.name = "IPI_resched"
};
static struct irqaction irq_call = {
.handler = ipi_call_interrupt,
.flags = IRQF_PERCPU,
.name = "IPI_call"
};
#endif /* CONFIG_MIPS_GIC_IPI */
static int gic_resched_int_base;
static int gic_call_int_base;
#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
{
return GIC_CALL_INT(cpu);
}
unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
{
return GIC_RESCHED_INT(cpu);
}
static struct irqaction i8259irq = {
.handler = no_action,
.name = "XT-PIC cascade",
.flags = IRQF_NO_THREAD,
};
static struct irqaction corehi_irqaction = {
.handler = no_action,
.name = "CoreHi",
.flags = IRQF_NO_THREAD,
};
static msc_irqmap_t msc_irqmap[] __initdata = {
{MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
{MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
};
static int msc_nr_irqs __initdata = ARRAY_SIZE(msc_irqmap);
static msc_irqmap_t msc_eicirqmap[] __initdata = {
{MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0},
{MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0}
};
static int msc_nr_eicirqs __initdata = ARRAY_SIZE(msc_eicirqmap);
/*
* This GIC specific tabular array defines the association between External
* Interrupts and CPUs/Core Interrupts. The nature of the External
* Interrupts is also defined here - polarity/trigger.
*/
#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
#define X GIC_UNUSED
static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
{ 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
{ 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
{ X, X, X, X, 0 },
/* The remainder of this table is initialised by fill_ipi_map */
};
#undef X
#ifdef CONFIG_MIPS_GIC_IPI
static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
{
int intr = baseintr + cpu;
gic_intr_map[intr].cpunum = cpu;
gic_intr_map[intr].pin = cpupin;
gic_intr_map[intr].polarity = GIC_POL_POS;
gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
gic_intr_map[intr].flags = GIC_FLAG_IPI;
ipi_map[cpu] |= (1 << (cpupin + 2));
}
static void __init fill_ipi_map(void)
{
int cpu;
MIPS: malta: Fix GIC interrupt offsets The GIC interrupt offsets are calculated based on the value of NR_CPUS. However, this is wrong because NR_CPUS may or may not contain the real number of the actual cpus present in the system. We fix that by using the 'nr_cpu_ids' variable which contains the real number of cpus in the system. Previously, an MT core (eg with 8 VPEs) will fail to boot if NR_CPUS was > 8 with the following errors: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/chip.c:670 __irq_set_handler+0x15c/0x164() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.12.0-rc5-00087-gced5633 5 Stack : 00000006 00000004 00000000 00000000 00000000 00000000 807a4f36 00000053 807a0000 00000000 80173218 80565aa8 00000000 00000000 00000000 0000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000 00000000 00000000 00000000 8054fd00 8054fd94 80500514 805657a7 8016eb4 807a0000 80500514 00000000 00000000 80565aa8 8079a5d8 80565766 8054fd0 ... Call Trace: [<801098c0>] show_stack+0x64/0x7c [<8049c6b0>] dump_stack+0x64/0x84 [<8012efc4>] warn_slowpath_common+0x84/0xb4 [<8012f00c>] warn_slowpath_null+0x18/0x24 [<80173218>] __irq_set_handler+0x15c/0x164 [<80587cf4>] arch_init_ipiirq+0x2c/0x3c [<805880c8>] arch_init_irq+0x3c4/0x4bc [<80588e28>] init_IRQ+0x3c/0x50 [<805847e8>] start_kernel+0x230/0x3d8 ---[ end trace 4eaa2a86a8e2da26 ]--- This is now fixed and the Malta board can boot with any NR_CPUS value which also helps supporting more processors in a single kernel binary. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6091/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-30 22:27:48 +08:00
for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
}
}
#endif
void __init arch_init_ipiirq(int irq, struct irqaction *action)
{
setup_irq(irq, action);
irq_set_handler(irq, handle_percpu_irq);
}
void __init arch_init_irq(void)
{
init_i8259_irqs();
if (!cpu_has_veic)
mips_cpu_irq_init();
if (mips_cm_present()) {
write_gcr_gic_base(GIC_BASE_ADDR | CM_GCR_GIC_BASE_GICEN_MSK);
gic_present = 1;
} else {
if (mips_revision_sconid == MIPS_REVISION_SCON_ROCIT) {
_msc01_biu_base = (unsigned long)
ioremap_nocache(MSC01_BIU_REG_BASE,
MSC01_BIU_ADDRSPACE_SZ);
gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) &
MSC01_SC_CFG_GICPRES_MSK) >>
MSC01_SC_CFG_GICPRES_SHF;
}
}
if (gic_present)
pr_debug("GIC present\n");
switch (mips_revision_sconid) {
case MIPS_REVISION_SCON_SOCIT:
case MIPS_REVISION_SCON_ROCIT:
if (cpu_has_veic)
init_msc_irqs(MIPS_MSC01_IC_REG_BASE,
MSC01E_INT_BASE, msc_eicirqmap,
msc_nr_eicirqs);
else
init_msc_irqs(MIPS_MSC01_IC_REG_BASE,
MSC01C_INT_BASE, msc_irqmap,
msc_nr_irqs);
break;
case MIPS_REVISION_SCON_SOCITSC:
case MIPS_REVISION_SCON_SOCITSCP:
if (cpu_has_veic)
init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE,
MSC01E_INT_BASE, msc_eicirqmap,
msc_nr_eicirqs);
else
init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE,
MSC01C_INT_BASE, msc_irqmap,
msc_nr_irqs);
}
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch);
setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
} else if (cpu_has_vint) {
set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch);
setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
&corehi_irqaction);
} else {
setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
&corehi_irqaction);
}
if (gic_present) {
/* FIXME */
int i;
#if defined(CONFIG_MIPS_GIC_IPI)
MIPS: malta: Fix GIC interrupt offsets The GIC interrupt offsets are calculated based on the value of NR_CPUS. However, this is wrong because NR_CPUS may or may not contain the real number of the actual cpus present in the system. We fix that by using the 'nr_cpu_ids' variable which contains the real number of cpus in the system. Previously, an MT core (eg with 8 VPEs) will fail to boot if NR_CPUS was > 8 with the following errors: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/chip.c:670 __irq_set_handler+0x15c/0x164() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.12.0-rc5-00087-gced5633 5 Stack : 00000006 00000004 00000000 00000000 00000000 00000000 807a4f36 00000053 807a0000 00000000 80173218 80565aa8 00000000 00000000 00000000 0000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000 00000000 00000000 00000000 8054fd00 8054fd94 80500514 805657a7 8016eb4 807a0000 80500514 00000000 00000000 80565aa8 8079a5d8 80565766 8054fd0 ... Call Trace: [<801098c0>] show_stack+0x64/0x7c [<8049c6b0>] dump_stack+0x64/0x84 [<8012efc4>] warn_slowpath_common+0x84/0xb4 [<8012f00c>] warn_slowpath_null+0x18/0x24 [<80173218>] __irq_set_handler+0x15c/0x164 [<80587cf4>] arch_init_ipiirq+0x2c/0x3c [<805880c8>] arch_init_irq+0x3c4/0x4bc [<80588e28>] init_IRQ+0x3c/0x50 [<805847e8>] start_kernel+0x230/0x3d8 ---[ end trace 4eaa2a86a8e2da26 ]--- This is now fixed and the Malta board can boot with any NR_CPUS value which also helps supporting more processors in a single kernel binary. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6091/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-30 22:27:48 +08:00
gic_call_int_base = GIC_NUM_INTRS -
(NR_CPUS - nr_cpu_ids) * 2 - nr_cpu_ids;
gic_resched_int_base = gic_call_int_base - nr_cpu_ids;
fill_ipi_map();
#endif
gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
if (!mips_cm_present()) {
/* Enable the GIC */
i = REG(_msc01_biu_base, MSC01_SC_CFG);
REG(_msc01_biu_base, MSC01_SC_CFG) =
(i | (0x1 << MSC01_SC_CFG_GICENA_SHF));
pr_debug("GIC Enabled\n");
}
#if defined(CONFIG_MIPS_GIC_IPI)
/* set up ipi interrupts */
if (cpu_has_vint) {
set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch);
set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch);
}
/* Argh.. this really needs sorting out.. */
pr_info("CPU%d: status register was %08x\n",
smp_processor_id(), read_c0_status());
write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4);
pr_info("CPU%d: status register now %08x\n",
smp_processor_id(), read_c0_status());
write_c0_status(0x1100dc00);
pr_info("CPU%d: status register frc %08x\n",
smp_processor_id(), read_c0_status());
MIPS: malta: Fix GIC interrupt offsets The GIC interrupt offsets are calculated based on the value of NR_CPUS. However, this is wrong because NR_CPUS may or may not contain the real number of the actual cpus present in the system. We fix that by using the 'nr_cpu_ids' variable which contains the real number of cpus in the system. Previously, an MT core (eg with 8 VPEs) will fail to boot if NR_CPUS was > 8 with the following errors: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/chip.c:670 __irq_set_handler+0x15c/0x164() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.12.0-rc5-00087-gced5633 5 Stack : 00000006 00000004 00000000 00000000 00000000 00000000 807a4f36 00000053 807a0000 00000000 80173218 80565aa8 00000000 00000000 00000000 0000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000 00000000 00000000 00000000 8054fd00 8054fd94 80500514 805657a7 8016eb4 807a0000 80500514 00000000 00000000 80565aa8 8079a5d8 80565766 8054fd0 ... Call Trace: [<801098c0>] show_stack+0x64/0x7c [<8049c6b0>] dump_stack+0x64/0x84 [<8012efc4>] warn_slowpath_common+0x84/0xb4 [<8012f00c>] warn_slowpath_null+0x18/0x24 [<80173218>] __irq_set_handler+0x15c/0x164 [<80587cf4>] arch_init_ipiirq+0x2c/0x3c [<805880c8>] arch_init_irq+0x3c4/0x4bc [<80588e28>] init_IRQ+0x3c/0x50 [<805847e8>] start_kernel+0x230/0x3d8 ---[ end trace 4eaa2a86a8e2da26 ]--- This is now fixed and the Malta board can boot with any NR_CPUS value which also helps supporting more processors in a single kernel binary. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6091/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-30 22:27:48 +08:00
for (i = 0; i < nr_cpu_ids; i++) {
arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
GIC_RESCHED_INT(i), &irq_resched);
arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
GIC_CALL_INT(i), &irq_call);
}
#endif
} else {
#if defined(CONFIG_MIPS_MT_SMP)
/* set up ipi interrupts */
if (cpu_has_veic) {
set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch);
set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch);
cpu_ipi_resched_irq = MSC01E_INT_SW0;
cpu_ipi_call_irq = MSC01E_INT_SW1;
} else {
if (cpu_has_vint) {
set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ,
ipi_resched_dispatch);
set_vi_handler (MIPS_CPU_IPI_CALL_IRQ,
ipi_call_dispatch);
}
cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE +
MIPS_CPU_IPI_RESCHED_IRQ;
cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE +
MIPS_CPU_IPI_CALL_IRQ;
}
arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched);
arch_init_ipiirq(cpu_ipi_call_irq, &irq_call);
#endif
}
}
void malta_be_init(void)
{
/* Could change CM error mask register. */
}
static char *tr[8] = {
"mem", "gcr", "gic", "mmio",
"0x04", "0x05", "0x06", "0x07"
};
static char *mcmd[32] = {
[0x00] = "0x00",
[0x01] = "Legacy Write",
[0x02] = "Legacy Read",
[0x03] = "0x03",
[0x04] = "0x04",
[0x05] = "0x05",
[0x06] = "0x06",
[0x07] = "0x07",
[0x08] = "Coherent Read Own",
[0x09] = "Coherent Read Share",
[0x0a] = "Coherent Read Discard",
[0x0b] = "Coherent Ready Share Always",
[0x0c] = "Coherent Upgrade",
[0x0d] = "Coherent Writeback",
[0x0e] = "0x0e",
[0x0f] = "0x0f",
[0x10] = "Coherent Copyback",
[0x11] = "Coherent Copyback Invalidate",
[0x12] = "Coherent Invalidate",
[0x13] = "Coherent Write Invalidate",
[0x14] = "Coherent Completion Sync",
[0x15] = "0x15",
[0x16] = "0x16",
[0x17] = "0x17",
[0x18] = "0x18",
[0x19] = "0x19",
[0x1a] = "0x1a",
[0x1b] = "0x1b",
[0x1c] = "0x1c",
[0x1d] = "0x1d",
[0x1e] = "0x1e",
[0x1f] = "0x1f"
};
static char *core[8] = {
"Invalid/OK", "Invalid/Data",
"Shared/OK", "Shared/Data",
"Modified/OK", "Modified/Data",
"Exclusive/OK", "Exclusive/Data"
};
static char *causes[32] = {
"None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR",
"COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
"0x08", "0x09", "0x0a", "0x0b",
"0x0c", "0x0d", "0x0e", "0x0f",
"0x10", "0x11", "0x12", "0x13",
"0x14", "0x15", "0x16", "INTVN_WR_ERR",
"INTVN_RD_ERR", "0x19", "0x1a", "0x1b",
"0x1c", "0x1d", "0x1e", "0x1f"
};
int malta_be_handler(struct pt_regs *regs, int is_fixup)
{
/* This duplicates the handling in do_be which seems wrong */
int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
if (mips_cm_present()) {
unsigned long cm_error = read_gcr_error_cause();
unsigned long cm_addr = read_gcr_error_addr();
unsigned long cm_other = read_gcr_error_mult();
unsigned long cause, ocause;
char buf[256];
cause = cm_error & CM_GCR_ERROR_CAUSE_ERRTYPE_MSK;
if (cause != 0) {
cause >>= CM_GCR_ERROR_CAUSE_ERRTYPE_SHF;
if (cause < 16) {
unsigned long cca_bits = (cm_error >> 15) & 7;
unsigned long tr_bits = (cm_error >> 12) & 7;
unsigned long cmd_bits = (cm_error >> 7) & 0x1f;
unsigned long stag_bits = (cm_error >> 3) & 15;
unsigned long sport_bits = (cm_error >> 0) & 7;
snprintf(buf, sizeof(buf),
"CCA=%lu TR=%s MCmd=%s STag=%lu "
"SPort=%lu\n",
cca_bits, tr[tr_bits], mcmd[cmd_bits],
stag_bits, sport_bits);
} else {
/* glob state & sresp together */
unsigned long c3_bits = (cm_error >> 18) & 7;
unsigned long c2_bits = (cm_error >> 15) & 7;
unsigned long c1_bits = (cm_error >> 12) & 7;
unsigned long c0_bits = (cm_error >> 9) & 7;
unsigned long sc_bit = (cm_error >> 8) & 1;
unsigned long cmd_bits = (cm_error >> 3) & 0x1f;
unsigned long sport_bits = (cm_error >> 0) & 7;
snprintf(buf, sizeof(buf),
"C3=%s C2=%s C1=%s C0=%s SC=%s "
"MCmd=%s SPort=%lu\n",
core[c3_bits], core[c2_bits],
core[c1_bits], core[c0_bits],
sc_bit ? "True" : "False",
mcmd[cmd_bits], sport_bits);
}
ocause = (cm_other & CM_GCR_ERROR_MULT_ERR2ND_MSK) >>
CM_GCR_ERROR_MULT_ERR2ND_SHF;
pr_err("CM_ERROR=%08lx %s <%s>\n", cm_error,
causes[cause], buf);
pr_err("CM_ADDR =%08lx\n", cm_addr);
pr_err("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]);
/* reprime cause register */
write_gcr_error_cause(0);
}
}
return retval;
}
void gic_enable_interrupt(int irq_vec)
{
GIC_SET_INTR_MASK(irq_vec);
}
void gic_disable_interrupt(int irq_vec)
{
GIC_CLR_INTR_MASK(irq_vec);
}
void gic_irq_ack(struct irq_data *d)
{
int irq = (d->irq - gic_irq_base);
GIC_CLR_INTR_MASK(irq);
if (gic_irq_flags[irq] & GIC_TRIG_EDGE)
GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq);
}
void gic_finish_irq(struct irq_data *d)
{
/* Enable interrupts. */
GIC_SET_INTR_MASK(d->irq - gic_irq_base);
}
void __init gic_platform_init(int irqs, struct irq_chip *irq_controller)
{
int i;
for (i = gic_irq_base; i < (gic_irq_base + irqs); i++)
irq_set_chip(i, irq_controller);
}