linux_old1/tools/perf/util/parse-events.h

236 lines
7.1 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __PERF_PARSE_EVENTS_H
#define __PERF_PARSE_EVENTS_H
/*
* Parse symbolic events/counts passed in as options:
*/
#include <linux/list.h>
#include <stdbool.h>
#include <linux/types.h>
#include <linux/perf_event.h>
#include <string.h>
struct list_head;
struct perf_evsel;
struct perf_evlist;
perf tools: Add parse_events_error interface Adding support to return error information from parse_events function. Following struct will be populated by parse_events function on return: struct parse_events_error { int idx; char *str; char *help; }; where 'idx' is the position in the string where the parsing failed, 'str' contains dynamically allocated error string describing the error and 'help' is optional help string. The change contains reporting function, which currently does not display anything. The code changes to supply error data for specific event types are coming in next patches. However this is what the expected output is: $ sudo perf record -e 'sched:krava' ls event syntax error: 'sched:krava' \___ unknown tracepoint ... $ perf record -e 'cpu/even=0x1/' ls event syntax error: 'cpu/even=0x1/' \___ unknown term valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type ... $ perf record -e cycles,cache-mises ls event syntax error: '..es,cache-mises' \___ parser error ... The output functions cut the beginning of the event string so the error starts up to 10th character and cut the end of the string of it crosses the terminal width. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org [ Renamed 'error' variables to 'err', not to clash with util.h error() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-23 03:10:16 +08:00
struct parse_events_error;
struct option;
struct tracepoint_path {
char *system;
char *name;
struct tracepoint_path *next;
};
struct tracepoint_path *tracepoint_id_to_path(u64 config);
struct tracepoint_path *tracepoint_name_to_path(const char *name);
bool have_tracepoints(struct list_head *evlist);
perf script: Add support for H/W and S/W events Custom fields set for each type by prepending field argument with type. For file with multiple event types (e.g., trace and S/W) display of an event type suppressed by setting output fields to "". e.g., perf record -ga -e sched:sched_switch -e cpu-clock -c 10000000 -R -- sleep 1 perf script openssl 11496 [000] 9711.807107: cpu-clock-msecs: ffffffff810c22dc arch_local_irq_restore ([kernel.kallsyms]) ffffffff810c518c __alloc_pages_nodemask ([kernel.kallsyms]) ffffffff810297b2 pte_alloc_one ([kernel.kallsyms]) ffffffff810d8b98 __pte_alloc ([kernel.kallsyms]) ffffffff810daf07 handle_mm_fault ([kernel.kallsyms]) ffffffff8138763a do_page_fault ([kernel.kallsyms]) ffffffff81384a65 page_fault ([kernel.kallsyms]) 7f6130507d70 asn1_check_tlen (/lib64/libcrypto.so.1.0.0c) 0 () openssl 11496 [000] 9711.808042: sched_switch: prev_comm=openssl ... kworker/0:0 4 [000] 9711.808067: sched_switch: prev_comm=kworker/... swapper 0 [001] 9711.808090: sched_switch: prev_comm=kworker/... sshd 11451 [001] 9711.808185: sched_switch: prev_comm=sshd pre... swapper 0 [001] 9711.816155: cpu-clock-msecs: ffffffff81023609 native_safe_halt ([kernel.kallsyms]) ffffffff8100132a cpu_idle ([kernel.kallsyms]) ffffffff8137cf9b start_secondary ([kernel.kallsyms]) openssl 11496 [000] 9711.817104: cpu-clock-msecs: 7f61304ad723 AES_cbc_encrypt (/lib64/libcrypto.so.1.0.0c) 7fff3402f950 () 12f0debc9a785634 () swapper 0 [001] 9711.826155: cpu-clock-msecs: ffffffff81023609 native_safe_halt ([kernel.kallsyms]) ffffffff8100132a cpu_idle ([kernel.kallsyms]) ffffffff8137cf9b start_secondary ([kernel.kallsyms]) To suppress trace events within the file and use default output for S/W events: perf script -f trace: or to suppress S/W events and do default display for trace events: perf script -f sw: Custom field selections: perf script -f sw:comm,tid,time -f trace:time,trace openssl 11496 9711.797162: swapper 0 9711.807071: openssl 11496 9711.807107: 9711.808042: prev_comm=openssl prev_pid=11496 prev_prio=120 prev_state=R ... 9711.808067: prev_comm=kworker/0:0 prev_pid=4 prev_prio=120 prev_state=S ... 9711.808090: prev_comm=kworker/0:0 prev_pid=0 prev_prio=120 prev_state=R ... 9711.808185: prev_comm=sshd prev_pid=11451 prev_prio=120 prev_state=S ==>... swapper 0 9711.816155: openssl 11496 9711.817104: swapper 0 9711.826155: Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <1299734608-5223-7-git-send-email-daahern@cisco.com> Signed-off-by: David Ahern <daahern@cisco.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 13:23:28 +08:00
const char *event_type(int type);
int parse_events_option(const struct option *opt, const char *str, int unset);
int parse_events(struct perf_evlist *evlist, const char *str,
struct parse_events_error *error);
int parse_events_terms(struct list_head *terms, const char *str);
int parse_filter(const struct option *opt, const char *str, int unset);
int exclude_perf(const struct option *opt, const char *arg, int unset);
#define EVENTS_HELP_MAX (128*1024)
enum perf_pmu_event_symbol_type {
PMU_EVENT_SYMBOL_ERR, /* not a PMU EVENT */
PMU_EVENT_SYMBOL, /* normal style PMU event */
PMU_EVENT_SYMBOL_PREFIX, /* prefix of pre-suf style event */
PMU_EVENT_SYMBOL_SUFFIX, /* suffix of pre-suf style event */
};
struct perf_pmu_event_symbol {
char *symbol;
enum perf_pmu_event_symbol_type type;
};
enum {
PARSE_EVENTS__TERM_TYPE_NUM,
PARSE_EVENTS__TERM_TYPE_STR,
};
enum {
PARSE_EVENTS__TERM_TYPE_USER,
PARSE_EVENTS__TERM_TYPE_CONFIG,
PARSE_EVENTS__TERM_TYPE_CONFIG1,
PARSE_EVENTS__TERM_TYPE_CONFIG2,
PARSE_EVENTS__TERM_TYPE_NAME,
PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD,
PARSE_EVENTS__TERM_TYPE_SAMPLE_FREQ,
PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE,
PARSE_EVENTS__TERM_TYPE_TIME,
PARSE_EVENTS__TERM_TYPE_CALLGRAPH,
PARSE_EVENTS__TERM_TYPE_STACKSIZE,
perf tools: Enable pre-event inherit setting by config terms This patch allows perf record setting event's attr.inherit bit by config terms like: # perf record -e cycles/no-inherit/ ... # perf record -e cycles/inherit/ ... So user can control inherit bit for each event separately. In following example, a.out fork()s in main then do some complex CPU intensive computations in both of its children. Basic result with and without inherit: # perf record -e cycles -e instructions ./a.out [ perf record: Woken up 9 times to write data ] [ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ] # perf report --stdio # ... # Samples: 23K of event 'cycles' # Event count (approx.): 23641752891 ... # Samples: 24K of event 'instructions' # Event count (approx.): 30428312415 # perf record -i -e cycles -e instructions ./a.out [ perf record: Woken up 5 times to write data ] [ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ] ... # Samples: 12K of event 'cycles' # Event count (approx.): 11699501775 ... # Samples: 12K of event 'instructions' # Event count (approx.): 15058023559 Cancel inherit for one event when globally enable: # perf record -e cycles/no-inherit/ -e instructions ./a.out [ perf record: Woken up 7 times to write data ] [ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ] ... # Samples: 12K of event 'cycles/no-inherit/' # Event count (approx.): 11895759282 ... # Samples: 24K of event 'instructions' # Event count (approx.): 30668000441 Enable inherit for one event when globally disable: # perf record -i -e cycles/inherit/ -e instructions ./a.out [ perf record: Woken up 7 times to write data ] [ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ] ... # Samples: 23K of event 'cycles/inherit/' # Event count (approx.): 23285400229 ... # Samples: 11K of event 'instructions' # Event count (approx.): 14969050259 Committer note: One can check if the bit was set, in addition to seeing the result in the perf.data file size as above by doing one of: # perf record -e cycles -e instructions -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ] # perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1 # So, the inherit bit was set in both, now, if we disable it globally using --no-inherit: # perf record --no-inherit -e cycles -e instructions -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ] # perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1 No inherit bit set, then disabling it and setting just on the cycles event: # perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ] # perf evlist -v cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1 # We can see it as well in by using a more verbose level of debug messages in the tool that sets up the perf_event_attr, 'perf record' in this case: [root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1 ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|ID|CPU|PERIOD read_format ID disabled 1 inherit 1 mmap 1 comm 1 freq 1 task 1 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 ------------------------------------------------------------ perf_event_attr: size 112 config 0x1 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|ID|CPU|PERIOD read_format ID disabled 1 freq 1 sample_id_all 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 <SNIP> Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Li Zefan <lizefan@huawei.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com [ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28 18:55:02 +08:00
PARSE_EVENTS__TERM_TYPE_NOINHERIT,
PARSE_EVENTS__TERM_TYPE_INHERIT,
perf tools: Per event max-stack settings The tooling counterpart, now it is possible to do: # perf record -e sched:sched_switch/max-stack=10/ -e cycles/call-graph=dwarf,max-stack=4/ -e cpu-cycles/call-graph=dwarf,max-stack=1024/ usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (5 samples) ] # perf evlist -v sched:sched_switch: type: 2, size: 112, config: 0x110, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, sample_max_stack: 10 cycles/call-graph=dwarf,max-stack=4/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 4 cpu-cycles/call-graph=dwarf,max-stack=1024/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 1024 # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events Using just /max-stack=N/ means /call-graph=fp,max-stack=N/, that should be further configurable by means of some .perfconfig knob. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-29 06:03:42 +08:00
PARSE_EVENTS__TERM_TYPE_MAX_STACK,
perf evsel: Introduce per event max_events property This simply adds the field to 'struct perf_evsel' and allows setting it via the event parser, to test it lets trace trace: First look at where in a function that receives an evsel we can put a probe to read how evsel->max_events was setup: # perf probe -x ~/bin/perf -L trace__event_handler <trace__event_handler@/home/acme/git/perf/tools/perf/builtin-trace.c:0> 0 static int trace__event_handler(struct trace *trace, struct perf_evsel *evsel, union perf_event *event __maybe_unused, struct perf_sample *sample) 3 { 4 struct thread *thread = machine__findnew_thread(trace->host, sample->pid, sample->tid); 5 int callchain_ret = 0; 7 if (sample->callchain) { 8 callchain_ret = trace__resolve_callchain(trace, evsel, sample, &callchain_cursor); 9 if (callchain_ret == 0) { 10 if (callchain_cursor.nr < trace->min_stack) 11 goto out; 12 callchain_ret = 1; } } See what variables we can probe at line 7: # perf probe -x ~/bin/perf -V trace__event_handler:7 Available variables at trace__event_handler:7 @<trace__event_handler+89> int callchain_ret struct perf_evsel* evsel struct perf_sample* sample struct thread* thread struct trace* trace union perf_event* event Add a probe at that line asking for evsel->max_events to be collected and named as "max_events": # perf probe -x ~/bin/perf trace__event_handler:7 'max_events=evsel->max_events' Added new event: probe_perf:trace__event_handler (on trace__event_handler:7 in /home/acme/bin/perf with max_events=evsel->max_events) You can now use it in all perf tools, such as: perf record -e probe_perf:trace__event_handler -aR sleep 1 Now use 'perf trace', here aliased to just 'trace' and trace trace, i.e. the first 'trace' is tracing just that 'probe_perf:trace__event_handler' event, while the traced trace is tracing all scheduler tracepoints, will stop at two events (--max-events 2) and will just set evsel->max_events for all the sched tracepoints to 9, we will see the output of both traces intermixed: # trace -e *perf:*event_handler trace --max-events 2 -e sched:*/nr=9/ 0.000 :0/0 sched:sched_waking:comm=rcu_sched pid=10 prio=120 target_cpu=000 0.009 :0/0 sched:sched_wakeup:comm=rcu_sched pid=10 prio=120 target_cpu=000 0.000 trace/23949 probe_perf:trace__event_handler:(48c34a) max_events=0x9 0.046 trace/23949 probe_perf:trace__event_handler:(48c34a) max_events=0x9 # Now, if the traced trace sends its output to /dev/null, we'll see just what the first level trace outputs: that evsel->max_events is indeed being set to 9: # trace -e *perf:*event_handler trace -o /dev/null --max-events 2 -e sched:*/nr=9/ 0.000 trace/23961 probe_perf:trace__event_handler:(48c34a) max_events=0x9 0.030 trace/23961 probe_perf:trace__event_handler:(48c34a) max_events=0x9 # Now that we can set evsel->max_events, we can go to the next step, honour that per-event property in 'perf trace'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-og00yasj276joem6e14l1eas@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-20 02:47:34 +08:00
PARSE_EVENTS__TERM_TYPE_MAX_EVENTS,
perf tools: Enable overwrite settings This patch allows following config terms and option: Globally setting events to overwrite; # perf record --overwrite ... Set specific events to be overwrite or no-overwrite. # perf record --event cycles/overwrite/ ... # perf record --event cycles/no-overwrite/ ... Add missing config terms and update the config term array size because the longest string length has changed. For overwritable events, it automatically selects attr.write_backward since perf requires it to be backward for reading. Test result: # perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ] # perf evlist -v syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1 # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:45 +08:00
PARSE_EVENTS__TERM_TYPE_NOOVERWRITE,
PARSE_EVENTS__TERM_TYPE_OVERWRITE,
PARSE_EVENTS__TERM_TYPE_DRV_CFG,
__PARSE_EVENTS__TERM_TYPE_NR,
};
2016-02-22 17:10:34 +08:00
struct parse_events_array {
size_t nr_ranges;
struct {
unsigned int start;
size_t length;
} *ranges;
};
struct parse_events_term {
char *config;
2016-02-22 17:10:34 +08:00
struct parse_events_array array;
union {
char *str;
u64 num;
} val;
int type_val;
int type_term;
struct list_head list;
bool used;
bool no_value;
/* error string indexes for within parsed string */
int err_term;
int err_val;
/* Coming from implicit alias */
bool weak;
};
perf tools: Add parse_events_error interface Adding support to return error information from parse_events function. Following struct will be populated by parse_events function on return: struct parse_events_error { int idx; char *str; char *help; }; where 'idx' is the position in the string where the parsing failed, 'str' contains dynamically allocated error string describing the error and 'help' is optional help string. The change contains reporting function, which currently does not display anything. The code changes to supply error data for specific event types are coming in next patches. However this is what the expected output is: $ sudo perf record -e 'sched:krava' ls event syntax error: 'sched:krava' \___ unknown tracepoint ... $ perf record -e 'cpu/even=0x1/' ls event syntax error: 'cpu/even=0x1/' \___ unknown term valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type ... $ perf record -e cycles,cache-mises ls event syntax error: '..es,cache-mises' \___ parser error ... The output functions cut the beginning of the event string so the error starts up to 10th character and cut the end of the string of it crosses the terminal width. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org [ Renamed 'error' variables to 'err', not to clash with util.h error() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-23 03:10:16 +08:00
struct parse_events_error {
int idx; /* index in the parsed string */
char *str; /* string to display at the index */
char *help; /* optional help string */
};
struct parse_events_state {
perf tools: Add parse_events_error interface Adding support to return error information from parse_events function. Following struct will be populated by parse_events function on return: struct parse_events_error { int idx; char *str; char *help; }; where 'idx' is the position in the string where the parsing failed, 'str' contains dynamically allocated error string describing the error and 'help' is optional help string. The change contains reporting function, which currently does not display anything. The code changes to supply error data for specific event types are coming in next patches. However this is what the expected output is: $ sudo perf record -e 'sched:krava' ls event syntax error: 'sched:krava' \___ unknown tracepoint ... $ perf record -e 'cpu/even=0x1/' ls event syntax error: 'cpu/even=0x1/' \___ unknown term valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type ... $ perf record -e cycles,cache-mises ls event syntax error: '..es,cache-mises' \___ parser error ... The output functions cut the beginning of the event string so the error starts up to 10th character and cut the end of the string of it crosses the terminal width. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org [ Renamed 'error' variables to 'err', not to clash with util.h error() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-23 03:10:16 +08:00
struct list_head list;
int idx;
int nr_groups;
struct parse_events_error *error;
perf tools: Enable passing event to BPF object A new syntax is added to the parser so that the user can access predefined perf events in BPF objects. After this patch, BPF programs for perf are finally able to utilize bpf_perf_event_read() introduced in commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU counter"). Test result: # cat test_bpf_map_2.c /************************ BEGIN **************************/ #include <uapi/linux/bpf.h> #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; static int (*trace_printk)(const char *fmt, int fmt_size, ...) = (void *)BPF_FUNC_trace_printk; static int (*get_smp_processor_id)(void) = (void *)BPF_FUNC_get_smp_processor_id; static int (*perf_event_read)(struct bpf_map_def *, int) = (void *)BPF_FUNC_perf_event_read; struct bpf_map_def SEC("maps") pmu_map = { .type = BPF_MAP_TYPE_PERF_EVENT_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = __NR_CPUS__, }; SEC("func_write=sys_write") int func_write(void *ctx) { unsigned long long val; char fmt[] = "sys_write: pmu=%llu\n"; val = perf_event_read(&pmu_map, get_smp_processor_id()); trace_printk(fmt, sizeof(fmt), val); return 0; } SEC("func_write_return=sys_write%return") int func_write_return(void *ctx) { unsigned long long val = 0; char fmt[] = "sys_write_return: pmu=%llu\n"; val = perf_event_read(&pmu_map, get_smp_processor_id()); trace_printk(fmt, sizeof(fmt), val); return 0; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; /************************* END ***************************/ Normal case: # echo "" > /sys/kernel/debug/tracing/trace # perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls / [SNIP] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (7 samples) ] # cat /sys/kernel/debug/tracing/trace | grep ls ls-17066 [000] d... 938449.863301: : sys_write: pmu=1157327 ls-17066 [000] dN.. 938449.863342: : sys_write_return: pmu=1225218 ls-17066 [000] d... 938449.863349: : sys_write: pmu=1241922 ls-17066 [000] dN.. 938449.863369: : sys_write_return: pmu=1267445 Normal case (system wide): # echo "" > /sys/kernel/debug/tracing/trace # perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.811 MB perf.data (120 samples) ] # cat /sys/kernel/debug/tracing/trace | grep -v '18446744073709551594' | grep -v perf | head -n 20 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | gmain-30828 [002] d... 2740551.068992: : sys_write: pmu=84373 gmain-30828 [002] d... 2740551.068992: : sys_write_return: pmu=87696 gmain-30828 [002] d... 2740551.068996: : sys_write: pmu=100658 gmain-30828 [002] d... 2740551.068997: : sys_write_return: pmu=102572 Error case 1: # perf record -e './test_bpf_map_2.c' ls / [SNIP] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data ] # cat /sys/kernel/debug/tracing/trace | grep ls ls-17115 [007] d... 2724279.665625: : sys_write: pmu=18446744073709551614 ls-17115 [007] dN.. 2724279.665651: : sys_write_return: pmu=18446744073709551614 ls-17115 [007] d... 2724279.665658: : sys_write: pmu=18446744073709551614 ls-17115 [007] dN.. 2724279.665677: : sys_write_return: pmu=18446744073709551614 (18446744073709551614 is 0xfffffffffffffffe (-2)) Error case 2: # perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=evt/' -a event syntax error: '..ps:pmu_map.event=evt/' \___ Event not found for map setting Hint: Valid config terms: map:[<arraymap>].value=[value] map:[<eventmap>].event=[event] [SNIP] Error case 3: # ls /proc/2348/task/ 2348 2505 2506 2507 2508 # perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -p 2348 ERROR: Apply config to BPF failed: Cannot set event to BPF map in multi-thread tracing Error case 4: # perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls / ERROR: Apply config to BPF failed: Doesn't support inherit event (Hint: use -i to turn off inherit) Error case 5: # perf record -i -e raw_syscalls:sys_enter -e './test_bpf_map_2.c/map:pmu_map.event=raw_syscalls:sys_enter/' ls ERROR: Apply config to BPF failed: Can only put raw, hardware and BPF output event into a BPF map Error case 6: # perf record -i -e './test_bpf_map_2.c/map:pmu_map.event=123/' ls / event syntax error: '.._map.event=123/' \___ Incorrect value type for map [SNIP] Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-7-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:33 +08:00
struct perf_evlist *evlist;
struct list_head *terms;
};
perf stat: Bail out on unsupported event config modifiers 'perf stat' accepts some config terms but doesn't apply them. For example: # perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash # ls # exit Performance counter stats for 'bash': 266258061 instructions/no-inherit/ 266258061 instructions/inherit/ 1.402183915 seconds time elapsed The result is confusing, because user may expect the first 'instructions' event exclude the 'ls' command. This patch forbid most of these config terms for 'perf stat'. Result: # ./perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash event syntax error: 'instructions/no-inherit/' \___ 'no-inherit' is not usable in 'perf stat' ... We can add blocked config terms back when 'perf stat' really supports them. This patch also removes unavailable config term from error message: # ./perf stat -e 'instructions/badterm/' ls event syntax error: 'instructions/badterm/' \___ unknown term valid terms: config,config1,config2,name # ./perf stat -e 'cpu/badterm/' ls event syntax error: 'cpu/badterm/' \___ unknown term valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1455882283-79592-11-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:43:58 +08:00
void parse_events__shrink_config_terms(void);
int parse_events__is_hardcoded_term(struct parse_events_term *term);
int parse_events_term__num(struct parse_events_term **term,
int type_term, char *config, u64 num,
bool novalue,
void *loc_term, void *loc_val);
int parse_events_term__str(struct parse_events_term **term,
int type_term, char *config, char *str,
void *loc_term, void *loc_val);
int parse_events_term__sym_hw(struct parse_events_term **term,
char *config, unsigned idx);
int parse_events_term__clone(struct parse_events_term **new,
struct parse_events_term *term);
void parse_events_terms__delete(struct list_head *terms);
void parse_events_terms__purge(struct list_head *terms);
2016-02-22 17:10:34 +08:00
void parse_events__clear_array(struct parse_events_array *a);
2012-08-08 18:21:54 +08:00
int parse_events__modifier_event(struct list_head *list, char *str, bool add);
perf tools: Add support to parse event group syntax Adding scanner/parser bits to parse event groups. The grammar for group is: groups: groups ',' group | group group: group_name '{' events '}' group_mod group_name: name | empty group_mod: ':' group_mods | empty group_mods: event_mod It's possible to use standard event modifier as a modifier for group. It'll be used as an update to existing event modifiers. It's necessary to use quoting ("'\) when specifying group on command line, since {} characters are interpreted by most of the shells. It is now possible to specify groups in event syntax like: '{cycles,faults}' - anonymous group 'group1{cycles,faults} - group with name 'group1' '{cycles,faults}:k - anonymous group with event modifier 'k' '{cpu-clock,task-clock},{minor-faults,major-faults}' - two anonymous groups The grouping functionality itself is coming shortly. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/n/tip-p4j8bnvo879uokum4k4zk5q6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08 18:14:14 +08:00
int parse_events__modifier_group(struct list_head *list, char *event_mod);
int parse_events_name(struct list_head *list, char *name);
int parse_events_add_tracepoint(struct list_head *list, int *idx,
const char *sys, const char *event,
perf tools: Enable event_config terms to tracepoint events This patch enables config terms for tracepoint perf events. Valid terms for tracepoint events are 'call-graph' and 'stack-size', so we can use different callgraph settings for each event and eliminate unnecessary overhead. Here is an example for using different call-graph config for each tracepoint. $ perf record -e syscalls:sys_enter_write/call-graph=fp/ -e syscalls:sys_exit_write/call-graph=no/ dd if=/dev/zero of=test bs=4k count=10 $ perf report --stdio # # Total Lost Samples: 0 # # Samples: 13 of event 'syscalls:sys_enter_write' # Event count (approx.): 13 # # Children Self Command Shared Object Symbol # ........ ........ ....... .................. ...................... # 76.92% 76.92% dd libpthread-2.20.so [.] __write_nocancel | ---__write_nocancel 23.08% 23.08% dd libc-2.20.so [.] write | ---write | |--33.33%-- 0x2031342820736574 | |--33.33%-- 0xa6e69207364726f | --33.33%-- 0x34202c7320393039 ... # Samples: 13 of event 'syscalls:sys_exit_write' # Event count (approx.): 13 # # Children Self Command Shared Object Symbol # ........ ........ ....... .................. ...................... # 76.92% 76.92% dd libpthread-2.20.so [.] __write_nocancel 23.08% 23.08% dd libc-2.20.so [.] write 7.69% 0.00% dd [unknown] [.] 0x0a6e69207364726f 7.69% 0.00% dd [unknown] [.] 0x2031342820736574 7.69% 0.00% dd [unknown] [.] 0x34202c7320393039 Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1443412336-120050-4-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 11:52:16 +08:00
struct parse_events_error *error,
struct list_head *head_config);
int parse_events_load_bpf(struct parse_events_state *parse_state,
perf tools: Enable passing bpf object file to --event By introducing new rules in tools/perf/util/parse-events.[ly], this patch enables 'perf record --event bpf_file.o' to select events by an eBPF object file. It calls parse_events_load_bpf() to load that file, which uses bpf__prepare_load() and finally calls bpf_object__open() for the object files. After applying this patch, commands like: # perf record --event foo.o sleep become possible. However, at this point it is unable to link any useful things onto the evsel list because the creating of probe points and BPF program attaching have not been implemented. Before real events are possible to be extracted, to avoid perf report error because of empty evsel list, this patch link a dummy evsel. The dummy event related code will be removed when probing and extracting code is ready. Commiter notes: Using it: $ ls -la foo.o ls: cannot access foo.o: No such file or directory $ perf record --event foo.o sleep libbpf: failed to open foo.o: No such file or directory event syntax error: 'foo.o' \___ BPF object file 'foo.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/build/perf/perf.o /tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped $ perf record --event /tmp/build/perf/perf.o sleep libbpf: /tmp/build/perf/perf.o is not an eBPF object file event syntax error: '/tmp/build/perf/perf.o' \___ BPF object file '/tmp/build/perf/perf.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/foo.o /tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped $ perf record --event /tmp/foo.o sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] $ perf evlist /tmp/foo.o $ perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 $ So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok. $ perf report --stdio Error: The perf.data file has no samples! # To display the perf.data header info, please use --header/--header-only options. # $ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:14 +08:00
struct list_head *list,
perf tools: Compile scriptlets to BPF objects when passing '.c' to --event This patch provides infrastructure for passing source files to --event directly using: # perf record --event bpf-file.c command This patch does following works: 1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is expanded to allow caller tell it whether the passed file is source file or object. 2) llvm__compile_bpf() is called to compile the '.c' file, the result is saved into memory. Use bpf_object__open_buffer() to load the in-memory object. Introduces a bpf-script-example.c so we can manually test it: # perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1 Note that '--clang-opt' must put before '--event'. Futher patches will merge it into a testcase so can be tested automatically. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:20 +08:00
char *bpf_file_name,
perf tools: Enable BPF object configure syntax This patch adds the final step for BPF map configuration. A new syntax is appended into parser so user can config BPF objects through '/' '/' enclosed config terms. After this patch, following syntax is available: # perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ... It would takes effect after appling following commits. Test result: # cat ./test_bpf_map_1.c /************************ BEGIN **************************/ #include <uapi/linux/bpf.h> #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; static void *(*map_lookup_elem)(struct bpf_map_def *, void *) = (void *)BPF_FUNC_map_lookup_elem; static int (*trace_printk)(const char *fmt, int fmt_size, ...) = (void *)BPF_FUNC_trace_printk; struct bpf_map_def SEC("maps") channel = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_nanosleep") int func(void *ctx) { int key = 0; char fmt[] = "%d\n"; int *pval = map_lookup_elem(&channel, &key); if (!pval) return 0; trace_printk(fmt, sizeof(fmt), *pval); return 0; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; /************************* END ***************************/ - Normal case: # ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data ] - Error case: # ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10 event syntax error: '..ps:channel:value/' \___ Config value not set (missing '=') Hint: Valid config term: map:[<arraymap>]:value=[value] (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events # ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10 event syntax error: '..pf_map_1.c/xmap:channel.value=10/' \___ Invalid object config option [SNIP] # ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10 event syntax error: '..p_1.c/map:xchannel.value=10/' \___ Target map not exist [SNIP] # ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10 event syntax error: '..ps:channel.xvalue=10/' \___ Invalid object map config option [SNIP] # ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10 event syntax error: '..nnel.value=x10/' \___ Incorrect value type for map [SNIP] Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c: # ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10 event syntax error: '..ps:channel.value=10/' \___ Can't use this config term to this type of map Hint: Valid config term: map:[<arraymap>].value=[value] (add -v to see detail) Signed-off-by: Wang Nan <wangnan0@huawei.com> [for parser part] Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:31 +08:00
bool source,
struct list_head *head_config);
perf tools: Enable passing bpf object file to --event By introducing new rules in tools/perf/util/parse-events.[ly], this patch enables 'perf record --event bpf_file.o' to select events by an eBPF object file. It calls parse_events_load_bpf() to load that file, which uses bpf__prepare_load() and finally calls bpf_object__open() for the object files. After applying this patch, commands like: # perf record --event foo.o sleep become possible. However, at this point it is unable to link any useful things onto the evsel list because the creating of probe points and BPF program attaching have not been implemented. Before real events are possible to be extracted, to avoid perf report error because of empty evsel list, this patch link a dummy evsel. The dummy event related code will be removed when probing and extracting code is ready. Commiter notes: Using it: $ ls -la foo.o ls: cannot access foo.o: No such file or directory $ perf record --event foo.o sleep libbpf: failed to open foo.o: No such file or directory event syntax error: 'foo.o' \___ BPF object file 'foo.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/build/perf/perf.o /tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped $ perf record --event /tmp/build/perf/perf.o sleep libbpf: /tmp/build/perf/perf.o is not an eBPF object file event syntax error: '/tmp/build/perf/perf.o' \___ BPF object file '/tmp/build/perf/perf.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/foo.o /tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped $ perf record --event /tmp/foo.o sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] $ perf evlist /tmp/foo.o $ perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 $ So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok. $ perf report --stdio Error: The perf.data file has no samples! # To display the perf.data header info, please use --header/--header-only options. # $ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:14 +08:00
/* Provide this function for perf test */
struct bpf_object;
int parse_events_load_bpf_obj(struct parse_events_state *parse_state,
perf tools: Enable passing bpf object file to --event By introducing new rules in tools/perf/util/parse-events.[ly], this patch enables 'perf record --event bpf_file.o' to select events by an eBPF object file. It calls parse_events_load_bpf() to load that file, which uses bpf__prepare_load() and finally calls bpf_object__open() for the object files. After applying this patch, commands like: # perf record --event foo.o sleep become possible. However, at this point it is unable to link any useful things onto the evsel list because the creating of probe points and BPF program attaching have not been implemented. Before real events are possible to be extracted, to avoid perf report error because of empty evsel list, this patch link a dummy evsel. The dummy event related code will be removed when probing and extracting code is ready. Commiter notes: Using it: $ ls -la foo.o ls: cannot access foo.o: No such file or directory $ perf record --event foo.o sleep libbpf: failed to open foo.o: No such file or directory event syntax error: 'foo.o' \___ BPF object file 'foo.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/build/perf/perf.o /tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped $ perf record --event /tmp/build/perf/perf.o sleep libbpf: /tmp/build/perf/perf.o is not an eBPF object file event syntax error: '/tmp/build/perf/perf.o' \___ BPF object file '/tmp/build/perf/perf.o' is invalid (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ $ file /tmp/foo.o /tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped $ perf record --event /tmp/foo.o sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] $ perf evlist /tmp/foo.o $ perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 $ So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok. $ perf report --stdio Error: The perf.data file has no samples! # To display the perf.data header info, please use --header/--header-only options. # $ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:14 +08:00
struct list_head *list,
perf tools: Apply tracepoint event definition options to BPF script Users can pass options to tracepoints defined in the BPF script. For example: # perf record -e ./test.c/no-inherit/ bash # dd if=/dev/zero of=/dev/null count=10000 # exit [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.022 MB perf.data (139 samples) ] (no-inherit works, only the sys_read issued by bash are captured, at least 10000 sys_read issued by dd are skipped.) test.c: #define SEC(NAME) __attribute__((section(NAME), used)) SEC("func=sys_read") int bpf_func__sys_read(void *ctx) { return 1; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; no-inherit is applied to the kprobe event defined in test.c. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-10-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:36 +08:00
struct bpf_object *obj,
struct list_head *head_config);
int parse_events_add_numeric(struct parse_events_state *parse_state,
struct list_head *list,
u32 type, u64 config,
struct list_head *head_config);
int parse_events_add_cache(struct list_head *list, int *idx,
perf tools: Enable config and setting names for legacy cache events This patch allows setting config terms for legacy cache events. For example: # perf stat -e L1-icache-misses/name=valA/ -e branches/name=valB/ ls ... Performance counter stats for 'ls': 11299 valA 451605 valB 0.000779091 seconds time elapsed # perf record -e cache-misses/name=inh/ -e cache-misses/name=noinh,no-inherit/ bash # ls # exit [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.023 MB perf.data (131 samples) ] # perf report --stdio | grep -B 1 'Event count' # Samples: 105 of event 'inh' # Event count (approx.): 109118 -- # Samples: 26 of event 'noinh' # Event count (approx.): 48302 A test case is introduced to test this feature. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1455882283-79592-14-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:44:01 +08:00
char *type, char *op_result1, char *op_result2,
struct parse_events_error *error,
struct list_head *head_config);
int parse_events_add_breakpoint(struct list_head *list, int *idx,
void *ptr, char *type, u64 len);
int parse_events_add_pmu(struct parse_events_state *parse_state,
struct list_head *list, char *name,
perf parse-events: Handle uncore event aliases in small groups properly Perf stat doesn't count the uncore event aliases from the same uncore block in a group, for example: perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000 # time counts unit events 1.000447342 <not counted> unc_m_cas_count.all 1.000447342 <not counted> unc_m_clockticks 2.000740654 <not counted> unc_m_cas_count.all 2.000740654 <not counted> unc_m_clockticks The output is very misleading. It gives a wrong impression that the uncore event doesn't work. An uncore block could be composed by several PMUs. An uncore event alias is a joint name which means the same event runs on all PMUs of a block. Perf doesn't support mixed events from different PMUs in the same group. It is wrong to put uncore event aliases in a big group. The right way is to split the big group into multiple small groups which only include the events from the same PMU. Only uncore event aliases from the same uncore block should be specially handled here. It doesn't make sense to mix the uncore events with other uncore events from different blocks or even core events in a group. With the patch: # time counts unit events 1.001557653 140,833 unc_m_cas_count.all 1.001557653 1,330,231,332 unc_m_clockticks 2.002709483 85,007 unc_m_cas_count.all 2.002709483 1,429,494,563 unc_m_clockticks Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-08 05:13:43 +08:00
struct list_head *head_config,
bool auto_merge_stats,
bool use_alias);
int parse_events_multi_pmu_add(struct parse_events_state *parse_state,
char *str,
struct list_head **listp);
int parse_events_copy_term_list(struct list_head *old,
struct list_head **new);
enum perf_pmu_event_symbol_type
perf_pmu__parse_check(const char *name);
perf parse-events: Handle uncore event aliases in small groups properly Perf stat doesn't count the uncore event aliases from the same uncore block in a group, for example: perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000 # time counts unit events 1.000447342 <not counted> unc_m_cas_count.all 1.000447342 <not counted> unc_m_clockticks 2.000740654 <not counted> unc_m_cas_count.all 2.000740654 <not counted> unc_m_clockticks The output is very misleading. It gives a wrong impression that the uncore event doesn't work. An uncore block could be composed by several PMUs. An uncore event alias is a joint name which means the same event runs on all PMUs of a block. Perf doesn't support mixed events from different PMUs in the same group. It is wrong to put uncore event aliases in a big group. The right way is to split the big group into multiple small groups which only include the events from the same PMU. Only uncore event aliases from the same uncore block should be specially handled here. It doesn't make sense to mix the uncore events with other uncore events from different blocks or even core events in a group. With the patch: # time counts unit events 1.001557653 140,833 unc_m_cas_count.all 1.001557653 1,330,231,332 unc_m_clockticks 2.002709483 85,007 unc_m_cas_count.all 2.002709483 1,429,494,563 unc_m_clockticks Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-08 05:13:43 +08:00
void parse_events__set_leader(char *name, struct list_head *list,
struct parse_events_state *parse_state);
void parse_events_update_lists(struct list_head *list_event,
struct list_head *list_all);
void parse_events_evlist_error(struct parse_events_state *parse_state,
perf tools: Add parse_events_error interface Adding support to return error information from parse_events function. Following struct will be populated by parse_events function on return: struct parse_events_error { int idx; char *str; char *help; }; where 'idx' is the position in the string where the parsing failed, 'str' contains dynamically allocated error string describing the error and 'help' is optional help string. The change contains reporting function, which currently does not display anything. The code changes to supply error data for specific event types are coming in next patches. However this is what the expected output is: $ sudo perf record -e 'sched:krava' ls event syntax error: 'sched:krava' \___ unknown tracepoint ... $ perf record -e 'cpu/even=0x1/' ls event syntax error: 'cpu/even=0x1/' \___ unknown term valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type ... $ perf record -e cycles,cache-mises ls event syntax error: '..es,cache-mises' \___ parser error ... The output functions cut the beginning of the event string so the error starts up to 10th character and cut the end of the string of it crosses the terminal width. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org [ Renamed 'error' variables to 'err', not to clash with util.h error() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-23 03:10:16 +08:00
int idx, const char *str);
perf tools: Add parser generator for events parsing Changing event parsing to use flex/bison parse generator. The event syntax stays as it was. grammar description: events: events ',' event | event event: event_def PE_MODIFIER_EVENT | event_def event_def: event_legacy_symbol sep_dc | event_legacy_cache sep_dc | event_legacy_breakpoint sep_dc | event_legacy_tracepoint sep_dc | event_legacy_numeric sep_dc | event_legacy_raw sep_dc event_legacy_symbol: PE_NAME_SYM event_legacy_cache: PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT | PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT | PE_NAME_CACHE_TYPE event_legacy_raw: PE_SEP_RAW PE_VALUE event_legacy_numeric: PE_VALUE ':' PE_VALUE event_legacy_breakpoint: PE_SEP_BP ':' PE_VALUE ':' PE_MODIFIER_BP event_breakpoint_type: PE_MODIFIER_BPTYPE | empty PE_NAME_SYM: cpu-cycles|cycles | stalled-cycles-frontend|idle-cycles-frontend | stalled-cycles-backend|idle-cycles-backend | instructions | cache-references | cache-misses | branch-instructions|branches | branch-misses | bus-cycles | cpu-clock | task-clock | page-faults|faults | minor-faults | major-faults | context-switches|cs | cpu-migrations|migrations | alignment-faults | emulation-faults PE_NAME_CACHE_TYPE: L1-dcache|l1-d|l1d|L1-data | L1-icache|l1-i|l1i|L1-instruction | LLC|L2 | dTLB|d-tlb|Data-TLB | iTLB|i-tlb|Instruction-TLB | branch|branches|bpu|btb|bpc | node PE_NAME_CACHE_OP_RESULT: load|loads|read | store|stores|write | prefetch|prefetches | speculative-read|speculative-load | refs|Reference|ops|access | misses|miss PE_MODIFIER_EVENT: [ukhp]{0,5} PE_MODIFIER_BP: [rwx] PE_SEP_BP: 'mem' PE_SEP_RAW: 'r' sep_dc: ':' | Added flex/bison files for event grammar parsing. The generated parser is part of the patch. Added makefile rule 'event-parser' to generate the parser code out of the bison/flex sources. Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-u4pfig5waq3ll2bfcdex8fgi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 03:09:15 +08:00
void print_events(const char *event_glob, bool name_only, bool quiet,
bool long_desc, bool details_flag);
struct event_symbol {
const char *symbol;
const char *alias;
};
extern struct event_symbol event_symbols_hw[];
extern struct event_symbol event_symbols_sw[];
void print_symbol_events(const char *event_glob, unsigned type,
struct event_symbol *syms, unsigned max,
bool name_only);
void print_tracepoint_events(const char *subsys_glob, const char *event_glob,
bool name_only);
int print_hwcache_events(const char *event_glob, bool name_only);
void print_sdt_events(const char *subsys_glob, const char *event_glob,
bool name_only);
int is_valid_tracepoint(const char *event_string);
int valid_event_mount(const char *eventfs);
perf tools: Show proper error message for wrong terms of hw/sw events Show proper error message and show valid terms when wrong config terms is specified for hw/sw type perf events. This patch makes the original error format function formats_error_string() more generic, which only outputs the static config terms for hw/sw perf events, and prepends pmu formats for pmu events. Before this patch: $ perf record -e 'cpu-clock/freqx=200/' -a sleep 1 invalid or unsupported event: 'cpu-clock/freqx=200/' Run 'perf list' for a list of valid events usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events After this patch: $ perf record -e 'cpu-clock/freqx=200/' -a sleep 1 event syntax error: 'cpu-clock/freqx=200/' \___ unknown term valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size Run 'perf list' for a list of valid events usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 11:52:14 +08:00
char *parse_events_formats_error_string(char *additional_terms);
void parse_events_print_error(struct parse_events_error *err,
const char *event);
#ifdef HAVE_LIBELF_SUPPORT
/*
* If the probe point starts with '%',
* or starts with "sdt_" and has a ':' but no '=',
* then it should be a SDT/cached probe point.
*/
static inline bool is_sdt_event(char *str)
{
return (str[0] == '%' ||
(!strncmp(str, "sdt_", 4) &&
!!strchr(str, ':') && !strchr(str, '=')));
}
#else
static inline bool is_sdt_event(char *str __maybe_unused)
{
return false;
}
#endif /* HAVE_LIBELF_SUPPORT */
#endif /* __PERF_PARSE_EVENTS_H */