p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/net/sched/act_skbmod.c

299 lines
7.4 KiB
C
Raw Normal View History

net_sched: Introduce skbmod action This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13 08:13:09 +08:00
/*
* net/sched/act_skbmod.c skb data modifier
*
* Copyright (c) 2016 Jamal Hadi Salim <jhs@mojatatu.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <linux/tc_act/tc_skbmod.h>
#include <net/tc_act/tc_skbmod.h>
netns: make struct pernet_operations::id unsigned int Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17 09:58:21 +08:00
static unsigned int skbmod_net_id;
net_sched: Introduce skbmod action This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13 08:13:09 +08:00
static struct tc_action_ops act_skbmod_ops;
#define MAX_EDIT_LEN ETH_HLEN
static int tcf_skbmod_run(struct sk_buff *skb, const struct tc_action *a,
struct tcf_result *res)
{
struct tcf_skbmod *d = to_skbmod(a);
int action;
struct tcf_skbmod_params *p;
u64 flags;
int err;
tcf_lastuse_update(&d->tcf_tm);
bstats_cpu_update(this_cpu_ptr(d->common.cpu_bstats), skb);
/* XXX: if you are going to edit more fields beyond ethernet header
* (example when you add IP header replacement or vlan swap)
* then MAX_EDIT_LEN needs to change appropriately
*/
err = skb_ensure_writable(skb, MAX_EDIT_LEN);
if (unlikely(err)) { /* best policy is to drop on the floor */
qstats_overlimit_inc(this_cpu_ptr(d->common.cpu_qstats));
return TC_ACT_SHOT;
}
rcu_read_lock();
action = READ_ONCE(d->tcf_action);
if (unlikely(action == TC_ACT_SHOT)) {
qstats_overlimit_inc(this_cpu_ptr(d->common.cpu_qstats));
rcu_read_unlock();
return action;
}
p = rcu_dereference(d->skbmod_p);
flags = p->flags;
if (flags & SKBMOD_F_DMAC)
ether_addr_copy(eth_hdr(skb)->h_dest, p->eth_dst);
if (flags & SKBMOD_F_SMAC)
ether_addr_copy(eth_hdr(skb)->h_source, p->eth_src);
if (flags & SKBMOD_F_ETYPE)
eth_hdr(skb)->h_proto = p->eth_type;
rcu_read_unlock();
if (flags & SKBMOD_F_SWAPMAC) {
u16 tmpaddr[ETH_ALEN / 2]; /* ether_addr_copy() requirement */
/*XXX: I am sure we can come up with more efficient swapping*/
ether_addr_copy((u8 *)tmpaddr, eth_hdr(skb)->h_dest);
ether_addr_copy(eth_hdr(skb)->h_dest, eth_hdr(skb)->h_source);
ether_addr_copy(eth_hdr(skb)->h_source, (u8 *)tmpaddr);
}
return action;
}
static const struct nla_policy skbmod_policy[TCA_SKBMOD_MAX + 1] = {
[TCA_SKBMOD_PARMS] = { .len = sizeof(struct tc_skbmod) },
[TCA_SKBMOD_DMAC] = { .len = ETH_ALEN },
[TCA_SKBMOD_SMAC] = { .len = ETH_ALEN },
[TCA_SKBMOD_ETYPE] = { .type = NLA_U16 },
};
static int tcf_skbmod_init(struct net *net, struct nlattr *nla,
struct nlattr *est, struct tc_action **a,
int ovr, int bind)
{
struct tc_action_net *tn = net_generic(net, skbmod_net_id);
struct nlattr *tb[TCA_SKBMOD_MAX + 1];
struct tcf_skbmod_params *p, *p_old;
struct tc_skbmod *parm;
struct tcf_skbmod *d;
bool exists = false;
u8 *daddr = NULL;
u8 *saddr = NULL;
u16 eth_type = 0;
u32 lflags = 0;
int ret = 0, err;
if (!nla)
return -EINVAL;
netlink: pass extended ACK struct to parsing functions Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12 20:34:07 +08:00
err = nla_parse_nested(tb, TCA_SKBMOD_MAX, nla, skbmod_policy, NULL);
net_sched: Introduce skbmod action This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13 08:13:09 +08:00
if (err < 0)
return err;
if (!tb[TCA_SKBMOD_PARMS])
return -EINVAL;
if (tb[TCA_SKBMOD_DMAC]) {
daddr = nla_data(tb[TCA_SKBMOD_DMAC]);
lflags |= SKBMOD_F_DMAC;
}
if (tb[TCA_SKBMOD_SMAC]) {
saddr = nla_data(tb[TCA_SKBMOD_SMAC]);
lflags |= SKBMOD_F_SMAC;
}
if (tb[TCA_SKBMOD_ETYPE]) {
eth_type = nla_get_u16(tb[TCA_SKBMOD_ETYPE]);
lflags |= SKBMOD_F_ETYPE;
}
parm = nla_data(tb[TCA_SKBMOD_PARMS]);
if (parm->flags & SKBMOD_F_SWAPMAC)
lflags = SKBMOD_F_SWAPMAC;
net/sched: Change act_api and act_xxx modules to use IDR Typically, each TC filter has its own action. All the actions of the same type are saved in its hash table. But the hash buckets are too small that it degrades to a list. And the performance is greatly affected. For example, it takes about 0m11.914s to insert 64K rules. If we convert the hash table to IDR, it only takes about 0m1.500s. The improvement is huge. But please note that the test result is based on previous patch that cls_flower uses IDR. Signed-off-by: Chris Mi <chrism@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30 14:31:59 +08:00
exists = tcf_idr_check(tn, parm->index, a, bind);
net_sched: Introduce skbmod action This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13 08:13:09 +08:00
if (exists && bind)
return 0;
if (!lflags)
return -EINVAL;
if (!exists) {
net/sched: Change act_api and act_xxx modules to use IDR Typically, each TC filter has its own action. All the actions of the same type are saved in its hash table. But the hash buckets are too small that it degrades to a list. And the performance is greatly affected. For example, it takes about 0m11.914s to insert 64K rules. If we convert the hash table to IDR, it only takes about 0m1.500s. The improvement is huge. But please note that the test result is based on previous patch that cls_flower uses IDR. Signed-off-by: Chris Mi <chrism@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30 14:31:59 +08:00
ret = tcf_idr_create(tn, parm->index, est, a,
&act_skbmod_ops, bind, true);
net_sched: Introduce skbmod action This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13 08:13:09 +08:00
if (ret)
return ret;
ret = ACT_P_CREATED;
} else {
net/sched: Change act_api and act_xxx modules to use IDR Typically, each TC filter has its own action. All the actions of the same type are saved in its hash table. But the hash buckets are too small that it degrades to a list. And the performance is greatly affected. For example, it takes about 0m11.914s to insert 64K rules. If we convert the hash table to IDR, it only takes about 0m1.500s. The improvement is huge. But please note that the test result is based on previous patch that cls_flower uses IDR. Signed-off-by: Chris Mi <chrism@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30 14:31:59 +08:00
tcf_idr_release(*a, bind);
net_sched: Introduce skbmod action This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13 08:13:09 +08:00
if (!ovr)
return -EEXIST;
}
d = to_skbmod(*a);
ASSERT_RTNL();
p = kzalloc(sizeof(struct tcf_skbmod_params), GFP_KERNEL);
if (unlikely(!p)) {
if (ovr)
net/sched: Change act_api and act_xxx modules to use IDR Typically, each TC filter has its own action. All the actions of the same type are saved in its hash table. But the hash buckets are too small that it degrades to a list. And the performance is greatly affected. For example, it takes about 0m11.914s to insert 64K rules. If we convert the hash table to IDR, it only takes about 0m1.500s. The improvement is huge. But please note that the test result is based on previous patch that cls_flower uses IDR. Signed-off-by: Chris Mi <chrism@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30 14:31:59 +08:00
tcf_idr_release(*a, bind);
net_sched: Introduce skbmod action This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13 08:13:09 +08:00
return -ENOMEM;
}
p->flags = lflags;
d->tcf_action = parm->action;
p_old = rtnl_dereference(d->skbmod_p);
if (ovr)
spin_lock_bh(&d->tcf_lock);
if (lflags & SKBMOD_F_DMAC)
ether_addr_copy(p->eth_dst, daddr);
if (lflags & SKBMOD_F_SMAC)
ether_addr_copy(p->eth_src, saddr);
if (lflags & SKBMOD_F_ETYPE)
p->eth_type = htons(eth_type);
rcu_assign_pointer(d->skbmod_p, p);
if (ovr)
spin_unlock_bh(&d->tcf_lock);
if (p_old)
kfree_rcu(p_old, rcu);
if (ret == ACT_P_CREATED)
net/sched: Change act_api and act_xxx modules to use IDR Typically, each TC filter has its own action. All the actions of the same type are saved in its hash table. But the hash buckets are too small that it degrades to a list. And the performance is greatly affected. For example, it takes about 0m11.914s to insert 64K rules. If we convert the hash table to IDR, it only takes about 0m1.500s. The improvement is huge. But please note that the test result is based on previous patch that cls_flower uses IDR. Signed-off-by: Chris Mi <chrism@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30 14:31:59 +08:00
tcf_idr_insert(tn, *a);
net_sched: Introduce skbmod action This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13 08:13:09 +08:00
return ret;
}
net_sched: remove unused parameter from act cleanup ops No one actually uses it. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-06 04:53:07 +08:00
static void tcf_skbmod_cleanup(struct tc_action *a)
net_sched: Introduce skbmod action This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13 08:13:09 +08:00
{
struct tcf_skbmod *d = to_skbmod(a);
struct tcf_skbmod_params *p;
p = rcu_dereference_protected(d->skbmod_p, 1);
kfree_rcu(p, rcu);
}
static int tcf_skbmod_dump(struct sk_buff *skb, struct tc_action *a,
int bind, int ref)
{
struct tcf_skbmod *d = to_skbmod(a);
unsigned char *b = skb_tail_pointer(skb);
struct tcf_skbmod_params *p = rtnl_dereference(d->skbmod_p);
struct tc_skbmod opt = {
.index = d->tcf_index,
.refcnt = d->tcf_refcnt - ref,
.bindcnt = d->tcf_bindcnt - bind,
.action = d->tcf_action,
};
struct tcf_t t;
opt.flags = p->flags;
if (nla_put(skb, TCA_SKBMOD_PARMS, sizeof(opt), &opt))
goto nla_put_failure;
if ((p->flags & SKBMOD_F_DMAC) &&
nla_put(skb, TCA_SKBMOD_DMAC, ETH_ALEN, p->eth_dst))
goto nla_put_failure;
if ((p->flags & SKBMOD_F_SMAC) &&
nla_put(skb, TCA_SKBMOD_SMAC, ETH_ALEN, p->eth_src))
goto nla_put_failure;
if ((p->flags & SKBMOD_F_ETYPE) &&
nla_put_u16(skb, TCA_SKBMOD_ETYPE, ntohs(p->eth_type)))
goto nla_put_failure;
tcf_tm_dump(&t, &d->tcf_tm);
if (nla_put_64bit(skb, TCA_SKBMOD_TM, sizeof(t), &t, TCA_SKBMOD_PAD))
goto nla_put_failure;
return skb->len;
nla_put_failure:
nlmsg_trim(skb, b);
return -1;
}
static int tcf_skbmod_walker(struct net *net, struct sk_buff *skb,
struct netlink_callback *cb, int type,
const struct tc_action_ops *ops)
{
struct tc_action_net *tn = net_generic(net, skbmod_net_id);
return tcf_generic_walker(tn, skb, cb, type, ops);
}
static int tcf_skbmod_search(struct net *net, struct tc_action **a, u32 index)
{
struct tc_action_net *tn = net_generic(net, skbmod_net_id);
net/sched: Change act_api and act_xxx modules to use IDR Typically, each TC filter has its own action. All the actions of the same type are saved in its hash table. But the hash buckets are too small that it degrades to a list. And the performance is greatly affected. For example, it takes about 0m11.914s to insert 64K rules. If we convert the hash table to IDR, it only takes about 0m1.500s. The improvement is huge. But please note that the test result is based on previous patch that cls_flower uses IDR. Signed-off-by: Chris Mi <chrism@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30 14:31:59 +08:00
return tcf_idr_search(tn, a, index);
net_sched: Introduce skbmod action This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13 08:13:09 +08:00
}
static struct tc_action_ops act_skbmod_ops = {
.kind = "skbmod",
.type = TCA_ACT_SKBMOD,
.owner = THIS_MODULE,
.act = tcf_skbmod_run,
.dump = tcf_skbmod_dump,
.init = tcf_skbmod_init,
.cleanup = tcf_skbmod_cleanup,
.walk = tcf_skbmod_walker,
.lookup = tcf_skbmod_search,
.size = sizeof(struct tcf_skbmod),
};
static __net_init int skbmod_init_net(struct net *net)
{
struct tc_action_net *tn = net_generic(net, skbmod_net_id);
Revert "net_sched: hold netns refcnt for each action" This reverts commit ceffcc5e254b450e6159f173e4538215cebf1b59. If we hold that refcnt, the netns can never be destroyed until all actions are destroyed by user, this breaks our netns design which we expect all actions are destroyed when we destroy the whole netns. Cc: Lucas Bates <lucasb@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-07 05:47:18 +08:00
return tc_action_net_init(tn, &act_skbmod_ops);
net_sched: Introduce skbmod action This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13 08:13:09 +08:00
}
static void __net_exit skbmod_exit_net(struct net *net)
{
struct tc_action_net *tn = net_generic(net, skbmod_net_id);
tc_action_net_exit(tn);
}
static struct pernet_operations skbmod_net_ops = {
.init = skbmod_init_net,
.exit = skbmod_exit_net,
.id = &skbmod_net_id,
.size = sizeof(struct tc_action_net),
};
MODULE_AUTHOR("Jamal Hadi Salim, <jhs@mojatatu.com>");
MODULE_DESCRIPTION("SKB data mod-ing");
MODULE_LICENSE("GPL");
static int __init skbmod_init_module(void)
{
return tcf_register_action(&act_skbmod_ops, &skbmod_net_ops);
}
static void __exit skbmod_cleanup_module(void)
{
tcf_unregister_action(&act_skbmod_ops, &skbmod_net_ops);
}
module_init(skbmod_init_module);
module_exit(skbmod_cleanup_module);