773 lines
33 KiB
C
773 lines
33 KiB
C
|
/*******************************************************************************
|
||
|
|
|
||
|
|
Intel(R) Gigabit Ethernet Linux driver
|
||
|
|
Copyright(c) 2007 Intel Corporation.
|
||
|
|
|
||
|
|
This program is free software; you can redistribute it and/or modify it
|
||
|
|
under the terms and conditions of the GNU General Public License,
|
||
|
|
version 2, as published by the Free Software Foundation.
|
||
|
|
|
||
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
||
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||
|
|
more details.
|
||
|
|
|
||
|
|
You should have received a copy of the GNU General Public License along with
|
||
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
||
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
||
|
|
|
||
|
|
The full GNU General Public License is included in this distribution in
|
||
|
|
the file called "COPYING".
|
||
|
|
|
||
|
|
Contact Information:
|
||
|
|
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
||
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
||
|
|
|
||
|
|
*******************************************************************************/
|
||
|
|
|
||
|
|
#ifndef _E1000_DEFINES_H_
|
||
|
|
#define _E1000_DEFINES_H_
|
||
|
|
|
||
|
|
/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
|
||
|
|
#define REQ_TX_DESCRIPTOR_MULTIPLE 8
|
||
|
|
#define REQ_RX_DESCRIPTOR_MULTIPLE 8
|
||
|
|
|
||
|
|
/* Definitions for power management and wakeup registers */
|
||
|
|
/* Wake Up Control */
|
||
|
|
#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
|
||
|
|
|
||
|
|
/* Wake Up Filter Control */
|
||
|
|
#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
|
||
|
|
#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
|
||
|
|
#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
|
||
|
|
#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
|
||
|
|
#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
|
||
|
|
#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
|
||
|
|
#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
|
||
|
|
#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
|
||
|
|
#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
|
||
|
|
#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
|
||
|
|
#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
|
||
|
|
#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
|
||
|
|
#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
|
||
|
|
|
||
|
|
/* Wake Up Status */
|
||
|
|
|
||
|
|
/* Wake Up Packet Length */
|
||
|
|
|
||
|
|
/* Four Flexible Filters are supported */
|
||
|
|
#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
|
||
|
|
|
||
|
|
/* Each Flexible Filter is at most 128 (0x80) bytes in length */
|
||
|
|
#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
|
||
|
|
|
||
|
|
|
||
|
|
/* Extended Device Control */
|
||
|
|
#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
|
||
|
|
#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
|
||
|
|
#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
|
||
|
|
#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
|
||
|
|
#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
|
||
|
|
#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
|
||
|
|
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
|
||
|
|
#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
|
||
|
|
#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
|
||
|
|
#define E1000_CTRL_EXT_EIAME 0x01000000
|
||
|
|
#define E1000_CTRL_EXT_IRCA 0x00000001
|
||
|
|
/* Interrupt delay cancellation */
|
||
|
|
/* Driver loaded bit for FW */
|
||
|
|
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000
|
||
|
|
/* Interrupt acknowledge Auto-mask */
|
||
|
|
/* Clear Interrupt timers after IMS clear */
|
||
|
|
/* packet buffer parity error detection enabled */
|
||
|
|
/* descriptor FIFO parity error detection enable */
|
||
|
|
#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
|
||
|
|
#define E1000_I2CCMD_REG_ADDR_SHIFT 16
|
||
|
|
#define E1000_I2CCMD_PHY_ADDR_SHIFT 24
|
||
|
|
#define E1000_I2CCMD_OPCODE_READ 0x08000000
|
||
|
|
#define E1000_I2CCMD_OPCODE_WRITE 0x00000000
|
||
|
|
#define E1000_I2CCMD_READY 0x20000000
|
||
|
|
#define E1000_I2CCMD_ERROR 0x80000000
|
||
|
|
#define E1000_MAX_SGMII_PHY_REG_ADDR 255
|
||
|
|
#define E1000_I2CCMD_PHY_TIMEOUT 200
|
||
|
|
|
||
|
|
/* Receive Decriptor bit definitions */
|
||
|
|
#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
|
||
|
|
#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
|
||
|
|
#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
|
||
|
|
#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
|
||
|
|
#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */
|
||
|
|
#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
|
||
|
|
#define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */
|
||
|
|
#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
|
||
|
|
#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
|
||
|
|
#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
|
||
|
|
#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
|
||
|
|
#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
|
||
|
|
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
|
||
|
|
|
||
|
|
#define E1000_RXDEXT_STATERR_CE 0x01000000
|
||
|
|
#define E1000_RXDEXT_STATERR_SE 0x02000000
|
||
|
|
#define E1000_RXDEXT_STATERR_SEQ 0x04000000
|
||
|
|
#define E1000_RXDEXT_STATERR_CXE 0x10000000
|
||
|
|
#define E1000_RXDEXT_STATERR_TCPE 0x20000000
|
||
|
|
#define E1000_RXDEXT_STATERR_IPE 0x40000000
|
||
|
|
#define E1000_RXDEXT_STATERR_RXE 0x80000000
|
||
|
|
|
||
|
|
/* mask to determine if packets should be dropped due to frame errors */
|
||
|
|
#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
|
||
|
|
E1000_RXD_ERR_CE | \
|
||
|
|
E1000_RXD_ERR_SE | \
|
||
|
|
E1000_RXD_ERR_SEQ | \
|
||
|
|
E1000_RXD_ERR_CXE | \
|
||
|
|
E1000_RXD_ERR_RXE)
|
||
|
|
|
||
|
|
/* Same mask, but for extended and packet split descriptors */
|
||
|
|
#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
|
||
|
|
E1000_RXDEXT_STATERR_CE | \
|
||
|
|
E1000_RXDEXT_STATERR_SE | \
|
||
|
|
E1000_RXDEXT_STATERR_SEQ | \
|
||
|
|
E1000_RXDEXT_STATERR_CXE | \
|
||
|
|
E1000_RXDEXT_STATERR_RXE)
|
||
|
|
|
||
|
|
#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
|
||
|
|
#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
|
||
|
|
#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
|
||
|
|
#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
|
||
|
|
#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
|
||
|
|
|
||
|
|
|
||
|
|
/* Management Control */
|
||
|
|
#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
|
||
|
|
#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
|
||
|
|
#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
|
||
|
|
/* Enable Neighbor Discovery Filtering */
|
||
|
|
#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
|
||
|
|
#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
|
||
|
|
/* Enable MAC address filtering */
|
||
|
|
#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
|
||
|
|
/* Enable MNG packets to host memory */
|
||
|
|
#define E1000_MANC_EN_MNG2HOST 0x00200000
|
||
|
|
/* Enable IP address filtering */
|
||
|
|
|
||
|
|
|
||
|
|
/* Receive Control */
|
||
|
|
#define E1000_RCTL_EN 0x00000002 /* enable */
|
||
|
|
#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
|
||
|
|
#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
|
||
|
|
#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
|
||
|
|
#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
|
||
|
|
#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
|
||
|
|
#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
|
||
|
|
#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
|
||
|
|
#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
|
||
|
|
#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
|
||
|
|
#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
|
||
|
|
/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
|
||
|
|
#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
|
||
|
|
#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
|
||
|
|
#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
|
||
|
|
#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
|
||
|
|
/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
|
||
|
|
#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
|
||
|
|
#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
|
||
|
|
#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
|
||
|
|
#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
|
||
|
|
#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
|
||
|
|
#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
|
||
|
|
#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Use byte values for the following shift parameters
|
||
|
|
* Usage:
|
||
|
|
* psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
|
||
|
|
* E1000_PSRCTL_BSIZE0_MASK) |
|
||
|
|
* ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
|
||
|
|
* E1000_PSRCTL_BSIZE1_MASK) |
|
||
|
|
* ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
|
||
|
|
* E1000_PSRCTL_BSIZE2_MASK) |
|
||
|
|
* ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
|
||
|
|
* E1000_PSRCTL_BSIZE3_MASK))
|
||
|
|
* where value0 = [128..16256], default=256
|
||
|
|
* value1 = [1024..64512], default=4096
|
||
|
|
* value2 = [0..64512], default=4096
|
||
|
|
* value3 = [0..64512], default=0
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
|
||
|
|
#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
|
||
|
|
#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
|
||
|
|
#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
|
||
|
|
|
||
|
|
#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
|
||
|
|
#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
|
||
|
|
#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
|
||
|
|
#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
|
||
|
|
|
||
|
|
/* SWFW_SYNC Definitions */
|
||
|
|
#define E1000_SWFW_EEP_SM 0x1
|
||
|
|
#define E1000_SWFW_PHY0_SM 0x2
|
||
|
|
#define E1000_SWFW_PHY1_SM 0x4
|
||
|
|
|
||
|
|
/* FACTPS Definitions */
|
||
|
|
/* Device Control */
|
||
|
|
#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
|
||
|
|
#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
|
||
|
|
#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
|
||
|
|
#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
|
||
|
|
#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
|
||
|
|
#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
|
||
|
|
#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
|
||
|
|
#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
|
||
|
|
#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
|
||
|
|
#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
|
||
|
|
/* Defined polarity of Dock/Undock indication in SDP[0] */
|
||
|
|
/* Reset both PHY ports, through PHYRST_N pin */
|
||
|
|
/* enable link status from external LINK_0 and LINK_1 pins */
|
||
|
|
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
|
||
|
|
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
|
||
|
|
#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
|
||
|
|
#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
|
||
|
|
#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
|
||
|
|
#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
|
||
|
|
#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
|
||
|
|
#define E1000_CTRL_RST 0x04000000 /* Global reset */
|
||
|
|
#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
|
||
|
|
#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
|
||
|
|
#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
|
||
|
|
#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
|
||
|
|
/* Initiate an interrupt to manageability engine */
|
||
|
|
#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */
|
||
|
|
|
||
|
|
/* Bit definitions for the Management Data IO (MDIO) and Management Data
|
||
|
|
* Clock (MDC) pins in the Device Control Register.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define E1000_CONNSW_ENRGSRC 0x4
|
||
|
|
#define E1000_PCS_LCTL_FLV_LINK_UP 1
|
||
|
|
#define E1000_PCS_LCTL_FSV_100 2
|
||
|
|
#define E1000_PCS_LCTL_FSV_1000 4
|
||
|
|
#define E1000_PCS_LCTL_FDV_FULL 8
|
||
|
|
#define E1000_PCS_LCTL_FSD 0x10
|
||
|
|
#define E1000_PCS_LCTL_FORCE_LINK 0x20
|
||
|
|
#define E1000_PCS_LCTL_AN_ENABLE 0x10000
|
||
|
|
#define E1000_PCS_LCTL_AN_RESTART 0x20000
|
||
|
|
#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000
|
||
|
|
|
||
|
|
#define E1000_PCS_LSTS_LINK_OK 1
|
||
|
|
#define E1000_PCS_LSTS_SPEED_100 2
|
||
|
|
#define E1000_PCS_LSTS_SPEED_1000 4
|
||
|
|
#define E1000_PCS_LSTS_DUPLEX_FULL 8
|
||
|
|
#define E1000_PCS_LSTS_SYNK_OK 0x10
|
||
|
|
|
||
|
|
/* Device Status */
|
||
|
|
#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
|
||
|
|
#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
|
||
|
|
#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
|
||
|
|
#define E1000_STATUS_FUNC_SHIFT 2
|
||
|
|
#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
|
||
|
|
#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
|
||
|
|
#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
|
||
|
|
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
|
||
|
|
/* Change in Dock/Undock state. Clear on write '0'. */
|
||
|
|
/* Status of Master requests. */
|
||
|
|
#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000
|
||
|
|
/* BMC external code execution disabled */
|
||
|
|
|
||
|
|
/* Constants used to intrepret the masked PCI-X bus speed. */
|
||
|
|
|
||
|
|
#define SPEED_10 10
|
||
|
|
#define SPEED_100 100
|
||
|
|
#define SPEED_1000 1000
|
||
|
|
#define HALF_DUPLEX 1
|
||
|
|
#define FULL_DUPLEX 2
|
||
|
|
|
||
|
|
|
||
|
|
#define ADVERTISE_10_HALF 0x0001
|
||
|
|
#define ADVERTISE_10_FULL 0x0002
|
||
|
|
#define ADVERTISE_100_HALF 0x0004
|
||
|
|
#define ADVERTISE_100_FULL 0x0008
|
||
|
|
#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
|
||
|
|
#define ADVERTISE_1000_FULL 0x0020
|
||
|
|
|
||
|
|
/* 1000/H is not supported, nor spec-compliant. */
|
||
|
|
#define E1000_ALL_SPEED_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
|
||
|
|
ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
|
||
|
|
ADVERTISE_1000_FULL)
|
||
|
|
#define E1000_ALL_NOT_GIG (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
|
||
|
|
ADVERTISE_100_HALF | ADVERTISE_100_FULL)
|
||
|
|
#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
|
||
|
|
#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
|
||
|
|
#define E1000_ALL_FULL_DUPLEX (ADVERTISE_10_FULL | ADVERTISE_100_FULL | \
|
||
|
|
ADVERTISE_1000_FULL)
|
||
|
|
#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
|
||
|
|
|
||
|
|
#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
|
||
|
|
|
||
|
|
/* LED Control */
|
||
|
|
#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
|
||
|
|
#define E1000_LEDCTL_LED0_MODE_SHIFT 0
|
||
|
|
#define E1000_LEDCTL_LED0_IVRT 0x00000040
|
||
|
|
#define E1000_LEDCTL_LED0_BLINK 0x00000080
|
||
|
|
|
||
|
|
#define E1000_LEDCTL_MODE_LED_ON 0xE
|
||
|
|
#define E1000_LEDCTL_MODE_LED_OFF 0xF
|
||
|
|
|
||
|
|
/* Transmit Descriptor bit definitions */
|
||
|
|
#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
|
||
|
|
#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
|
||
|
|
#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
|
||
|
|
#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
|
||
|
|
#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
|
||
|
|
#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
|
||
|
|
/* Extended desc bits for Linksec and timesync */
|
||
|
|
|
||
|
|
/* Transmit Control */
|
||
|
|
#define E1000_TCTL_EN 0x00000002 /* enable tx */
|
||
|
|
#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
|
||
|
|
#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
|
||
|
|
#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
|
||
|
|
#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
|
||
|
|
|
||
|
|
/* Transmit Arbitration Count */
|
||
|
|
|
||
|
|
/* SerDes Control */
|
||
|
|
#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
|
||
|
|
|
||
|
|
/* Receive Checksum Control */
|
||
|
|
#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
|
||
|
|
#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
|
||
|
|
#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
|
||
|
|
|
||
|
|
/* Header split receive */
|
||
|
|
|
||
|
|
/* Collision related configuration parameters */
|
||
|
|
#define E1000_COLLISION_THRESHOLD 15
|
||
|
|
#define E1000_CT_SHIFT 4
|
||
|
|
#define E1000_COLLISION_DISTANCE 63
|
||
|
|
#define E1000_COLD_SHIFT 12
|
||
|
|
|
||
|
|
/* Ethertype field values */
|
||
|
|
#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
|
||
|
|
|
||
|
|
#define MAX_JUMBO_FRAME_SIZE 0x3F00
|
||
|
|
|
||
|
|
/* Extended Configuration Control and Size */
|
||
|
|
#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
|
||
|
|
|
||
|
|
/* PBA constants */
|
||
|
|
#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
|
||
|
|
#define E1000_PBA_24K 0x0018
|
||
|
|
#define E1000_PBA_34K 0x0022
|
||
|
|
|
||
|
|
#define IFS_MAX 80
|
||
|
|
#define IFS_MIN 40
|
||
|
|
#define IFS_RATIO 4
|
||
|
|
#define IFS_STEP 10
|
||
|
|
#define MIN_NUM_XMITS 1000
|
||
|
|
|
||
|
|
/* SW Semaphore Register */
|
||
|
|
#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
|
||
|
|
#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
|
||
|
|
|
||
|
|
/* Interrupt Cause Read */
|
||
|
|
#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
|
||
|
|
#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
|
||
|
|
#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
|
||
|
|
#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
|
||
|
|
#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
|
||
|
|
#define E1000_ICR_RXO 0x00000040 /* rx overrun */
|
||
|
|
#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
|
||
|
|
#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
|
||
|
|
#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
|
||
|
|
#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
|
||
|
|
#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
|
||
|
|
#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
|
||
|
|
#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
|
||
|
|
#define E1000_ICR_TXD_LOW 0x00008000
|
||
|
|
#define E1000_ICR_SRPD 0x00010000
|
||
|
|
#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
|
||
|
|
#define E1000_ICR_MNG 0x00040000 /* Manageability event */
|
||
|
|
#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
|
||
|
|
/* If this bit asserted, the driver should claim the interrupt */
|
||
|
|
#define E1000_ICR_INT_ASSERTED 0x80000000
|
||
|
|
/* queue 0 Rx descriptor FIFO parity error */
|
||
|
|
#define E1000_ICR_RXD_FIFO_PAR0 0x00100000
|
||
|
|
/* queue 0 Tx descriptor FIFO parity error */
|
||
|
|
#define E1000_ICR_TXD_FIFO_PAR0 0x00200000
|
||
|
|
/* host arb read buffer parity error */
|
||
|
|
#define E1000_ICR_HOST_ARB_PAR 0x00400000
|
||
|
|
#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
|
||
|
|
/* queue 1 Rx descriptor FIFO parity error */
|
||
|
|
#define E1000_ICR_RXD_FIFO_PAR1 0x01000000
|
||
|
|
/* queue 1 Tx descriptor FIFO parity error */
|
||
|
|
#define E1000_ICR_TXD_FIFO_PAR1 0x02000000
|
||
|
|
/* FW changed the status of DISSW bit in the FWSM */
|
||
|
|
#define E1000_ICR_DSW 0x00000020
|
||
|
|
/* LAN connected device generates an interrupt */
|
||
|
|
#define E1000_ICR_PHYINT 0x00001000
|
||
|
|
#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */
|
||
|
|
|
||
|
|
/* Extended Interrupt Cause Read */
|
||
|
|
#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */
|
||
|
|
#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */
|
||
|
|
#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */
|
||
|
|
#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */
|
||
|
|
#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */
|
||
|
|
#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */
|
||
|
|
#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */
|
||
|
|
#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */
|
||
|
|
#define E1000_EICR_TCP_TIMER 0x40000000 /* TCP Timer */
|
||
|
|
#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
|
||
|
|
/* TCP Timer */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* This defines the bits that are set in the Interrupt Mask
|
||
|
|
* Set/Read Register. Each bit is documented below:
|
||
|
|
* o RXT0 = Receiver Timer Interrupt (ring 0)
|
||
|
|
* o TXDW = Transmit Descriptor Written Back
|
||
|
|
* o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
|
||
|
|
* o RXSEQ = Receive Sequence Error
|
||
|
|
* o LSC = Link Status Change
|
||
|
|
*/
|
||
|
|
#define IMS_ENABLE_MASK ( \
|
||
|
|
E1000_IMS_RXT0 | \
|
||
|
|
E1000_IMS_TXDW | \
|
||
|
|
E1000_IMS_RXDMT0 | \
|
||
|
|
E1000_IMS_RXSEQ | \
|
||
|
|
E1000_IMS_LSC)
|
||
|
|
|
||
|
|
/* Interrupt Mask Set */
|
||
|
|
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
|
||
|
|
#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
|
||
|
|
#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
|
||
|
|
#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
|
||
|
|
#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
|
||
|
|
/* queue 0 Rx descriptor FIFO parity error */
|
||
|
|
/* queue 0 Tx descriptor FIFO parity error */
|
||
|
|
/* host arb read buffer parity error */
|
||
|
|
/* packet buffer parity error */
|
||
|
|
/* queue 1 Rx descriptor FIFO parity error */
|
||
|
|
/* queue 1 Tx descriptor FIFO parity error */
|
||
|
|
|
||
|
|
/* Extended Interrupt Mask Set */
|
||
|
|
#define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */
|
||
|
|
#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */
|
||
|
|
|
||
|
|
/* Interrupt Cause Set */
|
||
|
|
#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
|
||
|
|
#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
|
||
|
|
/* queue 0 Rx descriptor FIFO parity error */
|
||
|
|
/* queue 0 Tx descriptor FIFO parity error */
|
||
|
|
/* host arb read buffer parity error */
|
||
|
|
/* packet buffer parity error */
|
||
|
|
/* queue 1 Rx descriptor FIFO parity error */
|
||
|
|
/* queue 1 Tx descriptor FIFO parity error */
|
||
|
|
|
||
|
|
/* Extended Interrupt Cause Set */
|
||
|
|
|
||
|
|
/* Transmit Descriptor Control */
|
||
|
|
/* Enable the counting of descriptors still to be processed. */
|
||
|
|
|
||
|
|
/* Flow Control Constants */
|
||
|
|
#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
|
||
|
|
#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
|
||
|
|
#define FLOW_CONTROL_TYPE 0x8808
|
||
|
|
|
||
|
|
/* 802.1q VLAN Packet Size */
|
||
|
|
#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
|
||
|
|
#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
|
||
|
|
|
||
|
|
/* Receive Address */
|
||
|
|
/*
|
||
|
|
* Number of high/low register pairs in the RAR. The RAR (Receive Address
|
||
|
|
* Registers) holds the directed and multicast addresses that we monitor.
|
||
|
|
* Technically, we have 16 spots. However, we reserve one of these spots
|
||
|
|
* (RAR[15]) for our directed address used by controllers with
|
||
|
|
* manageability enabled, allowing us room for 15 multicast addresses.
|
||
|
|
*/
|
||
|
|
#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
|
||
|
|
|
||
|
|
/* Error Codes */
|
||
|
|
#define E1000_ERR_NVM 1
|
||
|
|
#define E1000_ERR_PHY 2
|
||
|
|
#define E1000_ERR_CONFIG 3
|
||
|
|
#define E1000_ERR_PARAM 4
|
||
|
|
#define E1000_ERR_MAC_INIT 5
|
||
|
|
#define E1000_ERR_RESET 9
|
||
|
|
#define E1000_ERR_MASTER_REQUESTS_PENDING 10
|
||
|
|
#define E1000_ERR_HOST_INTERFACE_COMMAND 11
|
||
|
|
#define E1000_BLK_PHY_RESET 12
|
||
|
|
#define E1000_ERR_SWFW_SYNC 13
|
||
|
|
#define E1000_NOT_IMPLEMENTED 14
|
||
|
|
|
||
|
|
/* Loop limit on how long we wait for auto-negotiation to complete */
|
||
|
|
#define COPPER_LINK_UP_LIMIT 10
|
||
|
|
#define PHY_AUTO_NEG_LIMIT 45
|
||
|
|
#define PHY_FORCE_LIMIT 20
|
||
|
|
/* Number of 100 microseconds we wait for PCI Express master disable */
|
||
|
|
#define MASTER_DISABLE_TIMEOUT 800
|
||
|
|
/* Number of milliseconds we wait for PHY configuration done after MAC reset */
|
||
|
|
#define PHY_CFG_TIMEOUT 100
|
||
|
|
/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
|
||
|
|
/* Number of milliseconds for NVM auto read done after MAC reset. */
|
||
|
|
#define AUTO_READ_DONE_TIMEOUT 10
|
||
|
|
|
||
|
|
/* Flow Control */
|
||
|
|
#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
|
||
|
|
|
||
|
|
/* Transmit Configuration Word */
|
||
|
|
#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
|
||
|
|
|
||
|
|
/* Receive Configuration Word */
|
||
|
|
|
||
|
|
/* PCI Express Control */
|
||
|
|
#define E1000_GCR_RXD_NO_SNOOP 0x00000001
|
||
|
|
#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
|
||
|
|
#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
|
||
|
|
#define E1000_GCR_TXD_NO_SNOOP 0x00000008
|
||
|
|
#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
|
||
|
|
#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
|
||
|
|
|
||
|
|
#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
|
||
|
|
E1000_GCR_RXDSCW_NO_SNOOP | \
|
||
|
|
E1000_GCR_RXDSCR_NO_SNOOP | \
|
||
|
|
E1000_GCR_TXD_NO_SNOOP | \
|
||
|
|
E1000_GCR_TXDSCW_NO_SNOOP | \
|
||
|
|
E1000_GCR_TXDSCR_NO_SNOOP)
|
||
|
|
|
||
|
|
/* PHY Control Register */
|
||
|
|
#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
|
||
|
|
#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
|
||
|
|
#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
|
||
|
|
#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
|
||
|
|
#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
|
||
|
|
#define MII_CR_SPEED_1000 0x0040
|
||
|
|
#define MII_CR_SPEED_100 0x2000
|
||
|
|
#define MII_CR_SPEED_10 0x0000
|
||
|
|
|
||
|
|
/* PHY Status Register */
|
||
|
|
#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
|
||
|
|
#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
|
||
|
|
|
||
|
|
/* Autoneg Advertisement Register */
|
||
|
|
#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
|
||
|
|
#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
|
||
|
|
#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
|
||
|
|
#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
|
||
|
|
#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
|
||
|
|
#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
|
||
|
|
|
||
|
|
/* Link Partner Ability Register (Base Page) */
|
||
|
|
#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
|
||
|
|
#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
|
||
|
|
|
||
|
|
/* Autoneg Expansion Register */
|
||
|
|
|
||
|
|
/* 1000BASE-T Control Register */
|
||
|
|
#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
|
||
|
|
#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
|
||
|
|
/* 0=DTE device */
|
||
|
|
#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
|
||
|
|
/* 0=Configure PHY as Slave */
|
||
|
|
#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
|
||
|
|
/* 0=Automatic Master/Slave config */
|
||
|
|
|
||
|
|
/* 1000BASE-T Status Register */
|
||
|
|
#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
|
||
|
|
#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
|
||
|
|
|
||
|
|
|
||
|
|
/* PHY 1000 MII Register/Bit Definitions */
|
||
|
|
/* PHY Registers defined by IEEE */
|
||
|
|
#define PHY_CONTROL 0x00 /* Control Register */
|
||
|
|
#define PHY_STATUS 0x01 /* Status Regiser */
|
||
|
|
#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
|
||
|
|
#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
|
||
|
|
#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
|
||
|
|
#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
|
||
|
|
#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
|
||
|
|
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
|
||
|
|
|
||
|
|
/* NVM Control */
|
||
|
|
#define E1000_EECD_SK 0x00000001 /* NVM Clock */
|
||
|
|
#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
|
||
|
|
#define E1000_EECD_DI 0x00000004 /* NVM Data In */
|
||
|
|
#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
|
||
|
|
#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
|
||
|
|
#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
|
||
|
|
#define E1000_EECD_PRES 0x00000100 /* NVM Present */
|
||
|
|
/* NVM Addressing bits based on type 0=small, 1=large */
|
||
|
|
#define E1000_EECD_ADDR_BITS 0x00000400
|
||
|
|
#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
|
||
|
|
#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
|
||
|
|
#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
|
||
|
|
#define E1000_EECD_SIZE_EX_SHIFT 11
|
||
|
|
|
||
|
|
/* Offset to data in NVM read/write registers */
|
||
|
|
#define E1000_NVM_RW_REG_DATA 16
|
||
|
|
#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
|
||
|
|
#define E1000_NVM_RW_REG_START 1 /* Start operation */
|
||
|
|
#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
|
||
|
|
#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
|
||
|
|
|
||
|
|
/* NVM Word Offsets */
|
||
|
|
#define NVM_ID_LED_SETTINGS 0x0004
|
||
|
|
/* For SERDES output amplitude adjustment. */
|
||
|
|
#define NVM_INIT_CONTROL2_REG 0x000F
|
||
|
|
#define NVM_INIT_CONTROL3_PORT_A 0x0024
|
||
|
|
#define NVM_ALT_MAC_ADDR_PTR 0x0037
|
||
|
|
#define NVM_CHECKSUM_REG 0x003F
|
||
|
|
|
||
|
|
#define E1000_NVM_CFG_DONE_PORT_0 0x40000 /* MNG config cycle done */
|
||
|
|
#define E1000_NVM_CFG_DONE_PORT_1 0x80000 /* ...for second port */
|
||
|
|
|
||
|
|
/* Mask bits for fields in Word 0x0f of the NVM */
|
||
|
|
#define NVM_WORD0F_PAUSE_MASK 0x3000
|
||
|
|
#define NVM_WORD0F_ASM_DIR 0x2000
|
||
|
|
|
||
|
|
/* Mask bits for fields in Word 0x1a of the NVM */
|
||
|
|
|
||
|
|
/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
|
||
|
|
#define NVM_SUM 0xBABA
|
||
|
|
|
||
|
|
#define NVM_PBA_OFFSET_0 8
|
||
|
|
#define NVM_PBA_OFFSET_1 9
|
||
|
|
#define NVM_WORD_SIZE_BASE_SHIFT 6
|
||
|
|
|
||
|
|
/* NVM Commands - Microwire */
|
||
|
|
|
||
|
|
/* NVM Commands - SPI */
|
||
|
|
#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
|
||
|
|
#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */
|
||
|
|
#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
|
||
|
|
#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */
|
||
|
|
#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */
|
||
|
|
|
||
|
|
/* SPI NVM Status Register */
|
||
|
|
#define NVM_STATUS_RDY_SPI 0x01
|
||
|
|
|
||
|
|
/* Word definitions for ID LED Settings */
|
||
|
|
#define ID_LED_RESERVED_0000 0x0000
|
||
|
|
#define ID_LED_RESERVED_FFFF 0xFFFF
|
||
|
|
#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
|
||
|
|
(ID_LED_OFF1_OFF2 << 8) | \
|
||
|
|
(ID_LED_DEF1_DEF2 << 4) | \
|
||
|
|
(ID_LED_DEF1_DEF2))
|
||
|
|
#define ID_LED_DEF1_DEF2 0x1
|
||
|
|
#define ID_LED_DEF1_ON2 0x2
|
||
|
|
#define ID_LED_DEF1_OFF2 0x3
|
||
|
|
#define ID_LED_ON1_DEF2 0x4
|
||
|
|
#define ID_LED_ON1_ON2 0x5
|
||
|
|
#define ID_LED_ON1_OFF2 0x6
|
||
|
|
#define ID_LED_OFF1_DEF2 0x7
|
||
|
|
#define ID_LED_OFF1_ON2 0x8
|
||
|
|
#define ID_LED_OFF1_OFF2 0x9
|
||
|
|
|
||
|
|
#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
|
||
|
|
#define IGP_ACTIVITY_LED_ENABLE 0x0300
|
||
|
|
#define IGP_LED3_MODE 0x07000000
|
||
|
|
|
||
|
|
/* PCI/PCI-X/PCI-EX Config space */
|
||
|
|
#define PCI_HEADER_TYPE_REGISTER 0x0E
|
||
|
|
#define PCIE_LINK_STATUS 0x12
|
||
|
|
|
||
|
|
#define PCI_HEADER_TYPE_MULTIFUNC 0x80
|
||
|
|
#define PCIE_LINK_WIDTH_MASK 0x3F0
|
||
|
|
#define PCIE_LINK_WIDTH_SHIFT 4
|
||
|
|
|
||
|
|
#define PHY_REVISION_MASK 0xFFFFFFF0
|
||
|
|
#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
|
||
|
|
#define MAX_PHY_MULTI_PAGE_REG 0xF
|
||
|
|
|
||
|
|
/* Bit definitions for valid PHY IDs. */
|
||
|
|
/*
|
||
|
|
* I = Integrated
|
||
|
|
* E = External
|
||
|
|
*/
|
||
|
|
#define M88E1111_I_PHY_ID 0x01410CC0
|
||
|
|
#define IGP03E1000_E_PHY_ID 0x02A80390
|
||
|
|
#define M88_VENDOR 0x0141
|
||
|
|
|
||
|
|
/* M88E1000 Specific Registers */
|
||
|
|
#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
|
||
|
|
#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
|
||
|
|
#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
|
||
|
|
|
||
|
|
#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
|
||
|
|
#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
|
||
|
|
|
||
|
|
/* M88E1000 PHY Specific Control Register */
|
||
|
|
#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
|
||
|
|
/* 1=CLK125 low, 0=CLK125 toggling */
|
||
|
|
#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
|
||
|
|
/* Manual MDI configuration */
|
||
|
|
#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
|
||
|
|
/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
|
||
|
|
#define M88E1000_PSCR_AUTO_X_1000T 0x0040
|
||
|
|
/* Auto crossover enabled all speeds */
|
||
|
|
#define M88E1000_PSCR_AUTO_X_MODE 0x0060
|
||
|
|
/*
|
||
|
|
* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold
|
||
|
|
* 0=Normal 10BASE-T RX Threshold
|
||
|
|
*/
|
||
|
|
/* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
|
||
|
|
#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
|
||
|
|
|
||
|
|
/* M88E1000 PHY Specific Status Register */
|
||
|
|
#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
|
||
|
|
#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
|
||
|
|
#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
|
||
|
|
/*
|
||
|
|
* 0 = <50M
|
||
|
|
* 1 = 50-80M
|
||
|
|
* 2 = 80-110M
|
||
|
|
* 3 = 110-140M
|
||
|
|
* 4 = >140M
|
||
|
|
*/
|
||
|
|
#define M88E1000_PSSR_CABLE_LENGTH 0x0380
|
||
|
|
#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
|
||
|
|
#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
|
||
|
|
|
||
|
|
#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
|
||
|
|
|
||
|
|
/* M88E1000 Extended PHY Specific Control Register */
|
||
|
|
/*
|
||
|
|
* 1 = Lost lock detect enabled.
|
||
|
|
* Will assert lost lock and bring
|
||
|
|
* link down if idle not seen
|
||
|
|
* within 1ms in 1000BASE-T
|
||
|
|
*/
|
||
|
|
/*
|
||
|
|
* Number of times we will attempt to autonegotiate before downshifting if we
|
||
|
|
* are the master
|
||
|
|
*/
|
||
|
|
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
|
||
|
|
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
|
||
|
|
/*
|
||
|
|
* Number of times we will attempt to autonegotiate before downshifting if we
|
||
|
|
* are the slave
|
||
|
|
*/
|
||
|
|
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
|
||
|
|
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
|
||
|
|
#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
|
||
|
|
|
||
|
|
/* M88EC018 Rev 2 specific DownShift settings */
|
||
|
|
#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
|
||
|
|
#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
|
||
|
|
|
||
|
|
/* MDI Control */
|
||
|
|
#define E1000_MDIC_REG_SHIFT 16
|
||
|
|
#define E1000_MDIC_PHY_SHIFT 21
|
||
|
|
#define E1000_MDIC_OP_WRITE 0x04000000
|
||
|
|
#define E1000_MDIC_OP_READ 0x08000000
|
||
|
|
#define E1000_MDIC_READY 0x10000000
|
||
|
|
#define E1000_MDIC_ERROR 0x40000000
|
||
|
|
|
||
|
|
/* SerDes Control */
|
||
|
|
#define E1000_GEN_CTL_READY 0x80000000
|
||
|
|
#define E1000_GEN_CTL_ADDRESS_SHIFT 8
|
||
|
|
#define E1000_GEN_POLL_TIMEOUT 640
|
||
|
|
|
||
|
|
#endif
|