2005-04-17 06:20:36 +08:00
|
|
|
/*
|
|
|
|
* PMac DBDMA lowlevel functions
|
|
|
|
*
|
|
|
|
* Copyright (c) by Takashi Iwai <tiwai@suse.de>
|
|
|
|
* code based on dmasound.c.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
#include <sound/driver.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/interrupt.h>
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
#include <sound/core.h>
|
|
|
|
#include "pmac.h"
|
|
|
|
#include <sound/pcm_params.h>
|
|
|
|
#include <asm/pmac_feature.h>
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
#include <asm/pci-bridge.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
|
|
|
|
/* fixed frequency table for awacs, screamer, burgundy, DACA (44100 max) */
|
|
|
|
static int awacs_freqs[8] = {
|
|
|
|
44100, 29400, 22050, 17640, 14700, 11025, 8820, 7350
|
|
|
|
};
|
|
|
|
/* fixed frequency table for tumbler */
|
|
|
|
static int tumbler_freqs[1] = {
|
|
|
|
44100
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* allocate DBDMA command arrays
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_dbdma_alloc(struct snd_pmac *chip, struct pmac_dbdma *rec, int size)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
unsigned int rsize = sizeof(struct dbdma_cmd) * (size + 1);
|
|
|
|
|
|
|
|
rec->space = dma_alloc_coherent(&chip->pdev->dev, rsize,
|
|
|
|
&rec->dma_base, GFP_KERNEL);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (rec->space == NULL)
|
|
|
|
return -ENOMEM;
|
|
|
|
rec->size = size;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
memset(rec->space, 0, rsize);
|
2005-04-17 06:20:36 +08:00
|
|
|
rec->cmds = (void __iomem *)DBDMA_ALIGN(rec->space);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
rec->addr = rec->dma_base + (unsigned long)((char *)rec->cmds - (char *)rec->space);
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static void snd_pmac_dbdma_free(struct snd_pmac *chip, struct pmac_dbdma *rec)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2006-02-08 12:04:18 +08:00
|
|
|
if (rec->space) {
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
unsigned int rsize = sizeof(struct dbdma_cmd) * (rec->size + 1);
|
|
|
|
|
|
|
|
dma_free_coherent(&chip->pdev->dev, rsize, rec->space, rec->dma_base);
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* pcm stuff
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* look up frequency table
|
|
|
|
*/
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
unsigned int snd_pmac_rate_index(struct snd_pmac *chip, struct pmac_stream *rec, unsigned int rate)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
int i, ok, found;
|
|
|
|
|
|
|
|
ok = rec->cur_freqs;
|
|
|
|
if (rate > chip->freq_table[0])
|
|
|
|
return 0;
|
|
|
|
found = 0;
|
|
|
|
for (i = 0; i < chip->num_freqs; i++, ok >>= 1) {
|
|
|
|
if (! (ok & 1)) continue;
|
|
|
|
found = i;
|
|
|
|
if (rate >= chip->freq_table[i])
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return found;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* check whether another stream is active
|
|
|
|
*/
|
|
|
|
static inline int another_stream(int stream)
|
|
|
|
{
|
|
|
|
return (stream == SNDRV_PCM_STREAM_PLAYBACK) ?
|
|
|
|
SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* allocate buffers
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_pcm_hw_params(struct snd_pcm_substream *subs,
|
|
|
|
struct snd_pcm_hw_params *hw_params)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
return snd_pcm_lib_malloc_pages(subs, params_buffer_bytes(hw_params));
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* release buffers
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_pcm_hw_free(struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
snd_pcm_lib_free_pages(subs);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* get a stream of the opposite direction
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static struct pmac_stream *snd_pmac_get_stream(struct snd_pmac *chip, int stream)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
switch (stream) {
|
|
|
|
case SNDRV_PCM_STREAM_PLAYBACK:
|
|
|
|
return &chip->playback;
|
|
|
|
case SNDRV_PCM_STREAM_CAPTURE:
|
|
|
|
return &chip->capture;
|
|
|
|
default:
|
|
|
|
snd_BUG();
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* wait while run status is on
|
|
|
|
*/
|
2005-07-28 02:46:09 +08:00
|
|
|
static inline void
|
2005-11-17 22:09:46 +08:00
|
|
|
snd_pmac_wait_ack(struct pmac_stream *rec)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
int timeout = 50000;
|
|
|
|
while ((in_le32(&rec->dma->status) & RUN) && timeout-- > 0)
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* set the format and rate to the chip.
|
|
|
|
* call the lowlevel function if defined (e.g. for AWACS).
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static void snd_pmac_pcm_set_format(struct snd_pmac *chip)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
/* set up frequency and format */
|
|
|
|
out_le32(&chip->awacs->control, chip->control_mask | (chip->rate_index << 8));
|
|
|
|
out_le32(&chip->awacs->byteswap, chip->format == SNDRV_PCM_FORMAT_S16_LE ? 1 : 0);
|
|
|
|
if (chip->set_format)
|
|
|
|
chip->set_format(chip);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* stop the DMA transfer
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static inline void snd_pmac_dma_stop(struct pmac_stream *rec)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
out_le32(&rec->dma->control, (RUN|WAKE|FLUSH|PAUSE) << 16);
|
|
|
|
snd_pmac_wait_ack(rec);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* set the command pointer address
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static inline void snd_pmac_dma_set_command(struct pmac_stream *rec, struct pmac_dbdma *cmd)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
out_le32(&rec->dma->cmdptr, cmd->addr);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* start the DMA
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static inline void snd_pmac_dma_run(struct pmac_stream *rec, int status)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
out_le32(&rec->dma->control, status | (status << 16));
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* prepare playback/capture stream
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_pcm_prepare(struct snd_pmac *chip, struct pmac_stream *rec, struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
volatile struct dbdma_cmd __iomem *cp;
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pcm_runtime *runtime = subs->runtime;
|
2005-04-17 06:20:36 +08:00
|
|
|
int rate_index;
|
|
|
|
long offset;
|
2005-11-17 22:09:46 +08:00
|
|
|
struct pmac_stream *astr;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
rec->dma_size = snd_pcm_lib_buffer_bytes(subs);
|
|
|
|
rec->period_size = snd_pcm_lib_period_bytes(subs);
|
|
|
|
rec->nperiods = rec->dma_size / rec->period_size;
|
|
|
|
rec->cur_period = 0;
|
|
|
|
rate_index = snd_pmac_rate_index(chip, rec, runtime->rate);
|
|
|
|
|
|
|
|
/* set up constraints */
|
|
|
|
astr = snd_pmac_get_stream(chip, another_stream(rec->stream));
|
2005-10-10 17:46:31 +08:00
|
|
|
if (! astr)
|
|
|
|
return -EINVAL;
|
2005-04-17 06:20:36 +08:00
|
|
|
astr->cur_freqs = 1 << rate_index;
|
|
|
|
astr->cur_formats = 1 << runtime->format;
|
|
|
|
chip->rate_index = rate_index;
|
|
|
|
chip->format = runtime->format;
|
|
|
|
|
|
|
|
/* We really want to execute a DMA stop command, after the AWACS
|
|
|
|
* is initialized.
|
|
|
|
* For reasons I don't understand, it stops the hissing noise
|
|
|
|
* common to many PowerBook G3 systems and random noise otherwise
|
|
|
|
* captured on iBook2's about every third time. -ReneR
|
|
|
|
*/
|
|
|
|
spin_lock_irq(&chip->reg_lock);
|
|
|
|
snd_pmac_dma_stop(rec);
|
|
|
|
st_le16(&chip->extra_dma.cmds->command, DBDMA_STOP);
|
|
|
|
snd_pmac_dma_set_command(rec, &chip->extra_dma);
|
|
|
|
snd_pmac_dma_run(rec, RUN);
|
|
|
|
spin_unlock_irq(&chip->reg_lock);
|
|
|
|
mdelay(5);
|
|
|
|
spin_lock_irq(&chip->reg_lock);
|
|
|
|
/* continuous DMA memory type doesn't provide the physical address,
|
|
|
|
* so we need to resolve the address here...
|
|
|
|
*/
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
offset = runtime->dma_addr;
|
2005-04-17 06:20:36 +08:00
|
|
|
for (i = 0, cp = rec->cmd.cmds; i < rec->nperiods; i++, cp++) {
|
|
|
|
st_le32(&cp->phy_addr, offset);
|
|
|
|
st_le16(&cp->req_count, rec->period_size);
|
|
|
|
/*st_le16(&cp->res_count, 0);*/
|
|
|
|
st_le16(&cp->xfer_status, 0);
|
|
|
|
offset += rec->period_size;
|
|
|
|
}
|
|
|
|
/* make loop */
|
|
|
|
st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS);
|
|
|
|
st_le32(&cp->cmd_dep, rec->cmd.addr);
|
|
|
|
|
|
|
|
snd_pmac_dma_stop(rec);
|
|
|
|
snd_pmac_dma_set_command(rec, &rec->cmd);
|
|
|
|
spin_unlock_irq(&chip->reg_lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PCM trigger/stop
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_pcm_trigger(struct snd_pmac *chip, struct pmac_stream *rec,
|
|
|
|
struct snd_pcm_substream *subs, int cmd)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
volatile struct dbdma_cmd __iomem *cp;
|
|
|
|
int i, command;
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
|
|
if (rec->running)
|
|
|
|
return -EBUSY;
|
|
|
|
command = (subs->stream == SNDRV_PCM_STREAM_PLAYBACK ?
|
|
|
|
OUTPUT_MORE : INPUT_MORE) + INTR_ALWAYS;
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
snd_pmac_beep_stop(chip);
|
|
|
|
snd_pmac_pcm_set_format(chip);
|
|
|
|
for (i = 0, cp = rec->cmd.cmds; i < rec->nperiods; i++, cp++)
|
|
|
|
out_le16(&cp->command, command);
|
|
|
|
snd_pmac_dma_set_command(rec, &rec->cmd);
|
|
|
|
(void)in_le32(&rec->dma->status);
|
|
|
|
snd_pmac_dma_run(rec, RUN|WAKE);
|
|
|
|
rec->running = 1;
|
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
rec->running = 0;
|
|
|
|
/*printk("stopped!!\n");*/
|
|
|
|
snd_pmac_dma_stop(rec);
|
|
|
|
for (i = 0, cp = rec->cmd.cmds; i < rec->nperiods; i++, cp++)
|
|
|
|
out_le16(&cp->command, DBDMA_STOP);
|
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* return the current pointer
|
|
|
|
*/
|
|
|
|
inline
|
2005-11-17 22:09:46 +08:00
|
|
|
static snd_pcm_uframes_t snd_pmac_pcm_pointer(struct snd_pmac *chip,
|
|
|
|
struct pmac_stream *rec,
|
|
|
|
struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
int count = 0;
|
|
|
|
|
|
|
|
#if 1 /* hmm.. how can we get the current dma pointer?? */
|
|
|
|
int stat;
|
|
|
|
volatile struct dbdma_cmd __iomem *cp = &rec->cmd.cmds[rec->cur_period];
|
|
|
|
stat = ld_le16(&cp->xfer_status);
|
|
|
|
if (stat & (ACTIVE|DEAD)) {
|
|
|
|
count = in_le16(&cp->res_count);
|
|
|
|
if (count)
|
|
|
|
count = rec->period_size - count;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
count += rec->cur_period * rec->period_size;
|
|
|
|
/*printk("pointer=%d\n", count);*/
|
|
|
|
return bytes_to_frames(subs->runtime, count);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* playback
|
|
|
|
*/
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_playback_prepare(struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-17 06:20:36 +08:00
|
|
|
return snd_pmac_pcm_prepare(chip, &chip->playback, subs);
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_playback_trigger(struct snd_pcm_substream *subs,
|
2005-04-17 06:20:36 +08:00
|
|
|
int cmd)
|
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-17 06:20:36 +08:00
|
|
|
return snd_pmac_pcm_trigger(chip, &chip->playback, subs, cmd);
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static snd_pcm_uframes_t snd_pmac_playback_pointer(struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-17 06:20:36 +08:00
|
|
|
return snd_pmac_pcm_pointer(chip, &chip->playback, subs);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* capture
|
|
|
|
*/
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_capture_prepare(struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-17 06:20:36 +08:00
|
|
|
return snd_pmac_pcm_prepare(chip, &chip->capture, subs);
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_capture_trigger(struct snd_pcm_substream *subs,
|
2005-04-17 06:20:36 +08:00
|
|
|
int cmd)
|
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-17 06:20:36 +08:00
|
|
|
return snd_pmac_pcm_trigger(chip, &chip->capture, subs, cmd);
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static snd_pcm_uframes_t snd_pmac_capture_pointer(struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-17 06:20:36 +08:00
|
|
|
return snd_pmac_pcm_pointer(chip, &chip->capture, subs);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* update playback/capture pointer from interrupts
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static void snd_pmac_pcm_update(struct snd_pmac *chip, struct pmac_stream *rec)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
volatile struct dbdma_cmd __iomem *cp;
|
|
|
|
int c;
|
|
|
|
int stat;
|
|
|
|
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
if (rec->running) {
|
|
|
|
cp = &rec->cmd.cmds[rec->cur_period];
|
|
|
|
for (c = 0; c < rec->nperiods; c++) { /* at most all fragments */
|
|
|
|
stat = ld_le16(&cp->xfer_status);
|
|
|
|
if (! (stat & ACTIVE))
|
|
|
|
break;
|
|
|
|
/*printk("update frag %d\n", rec->cur_period);*/
|
|
|
|
st_le16(&cp->xfer_status, 0);
|
|
|
|
st_le16(&cp->req_count, rec->period_size);
|
|
|
|
/*st_le16(&cp->res_count, 0);*/
|
|
|
|
rec->cur_period++;
|
|
|
|
if (rec->cur_period >= rec->nperiods) {
|
|
|
|
rec->cur_period = 0;
|
|
|
|
cp = rec->cmd.cmds;
|
|
|
|
} else
|
|
|
|
cp++;
|
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
snd_pcm_period_elapsed(rec->substream);
|
|
|
|
spin_lock(&chip->reg_lock);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock(&chip->reg_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* hw info
|
|
|
|
*/
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static struct snd_pcm_hardware snd_pmac_playback =
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
.info = (SNDRV_PCM_INFO_INTERLEAVED |
|
|
|
|
SNDRV_PCM_INFO_MMAP |
|
|
|
|
SNDRV_PCM_INFO_MMAP_VALID |
|
|
|
|
SNDRV_PCM_INFO_RESUME),
|
|
|
|
.formats = SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S16_LE,
|
|
|
|
.rates = SNDRV_PCM_RATE_8000_44100,
|
|
|
|
.rate_min = 7350,
|
|
|
|
.rate_max = 44100,
|
|
|
|
.channels_min = 2,
|
|
|
|
.channels_max = 2,
|
|
|
|
.buffer_bytes_max = 131072,
|
|
|
|
.period_bytes_min = 256,
|
|
|
|
.period_bytes_max = 16384,
|
|
|
|
.periods_min = 3,
|
|
|
|
.periods_max = PMAC_MAX_FRAGS,
|
|
|
|
};
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static struct snd_pcm_hardware snd_pmac_capture =
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
.info = (SNDRV_PCM_INFO_INTERLEAVED |
|
|
|
|
SNDRV_PCM_INFO_MMAP |
|
|
|
|
SNDRV_PCM_INFO_MMAP_VALID |
|
|
|
|
SNDRV_PCM_INFO_RESUME),
|
|
|
|
.formats = SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S16_LE,
|
|
|
|
.rates = SNDRV_PCM_RATE_8000_44100,
|
|
|
|
.rate_min = 7350,
|
|
|
|
.rate_max = 44100,
|
|
|
|
.channels_min = 2,
|
|
|
|
.channels_max = 2,
|
|
|
|
.buffer_bytes_max = 131072,
|
|
|
|
.period_bytes_min = 256,
|
|
|
|
.period_bytes_max = 16384,
|
|
|
|
.periods_min = 3,
|
|
|
|
.periods_max = PMAC_MAX_FRAGS,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
#if 0 // NYI
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_hw_rule_rate(struct snd_pcm_hw_params *params,
|
|
|
|
struct snd_pcm_hw_rule *rule)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = rule->private;
|
|
|
|
struct pmac_stream *rec = snd_pmac_get_stream(chip, rule->deps[0]);
|
2005-04-17 06:20:36 +08:00
|
|
|
int i, freq_table[8], num_freqs;
|
|
|
|
|
2005-10-10 17:46:31 +08:00
|
|
|
if (! rec)
|
|
|
|
return -EINVAL;
|
2005-04-17 06:20:36 +08:00
|
|
|
num_freqs = 0;
|
|
|
|
for (i = chip->num_freqs - 1; i >= 0; i--) {
|
|
|
|
if (rec->cur_freqs & (1 << i))
|
|
|
|
freq_table[num_freqs++] = chip->freq_table[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
return snd_interval_list(hw_param_interval(params, rule->var),
|
|
|
|
num_freqs, freq_table, 0);
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_hw_rule_format(struct snd_pcm_hw_params *params,
|
|
|
|
struct snd_pcm_hw_rule *rule)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = rule->private;
|
|
|
|
struct pmac_stream *rec = snd_pmac_get_stream(chip, rule->deps[0]);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2005-10-10 17:46:31 +08:00
|
|
|
if (! rec)
|
|
|
|
return -EINVAL;
|
2005-04-17 06:20:36 +08:00
|
|
|
return snd_mask_refine_set(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT),
|
|
|
|
rec->cur_formats);
|
|
|
|
}
|
|
|
|
#endif // NYI
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_pcm_open(struct snd_pmac *chip, struct pmac_stream *rec,
|
|
|
|
struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pcm_runtime *runtime = subs->runtime;
|
2005-04-17 06:20:36 +08:00
|
|
|
int i, j, fflags;
|
|
|
|
static int typical_freqs[] = {
|
|
|
|
44100,
|
|
|
|
22050,
|
|
|
|
11025,
|
|
|
|
0,
|
|
|
|
};
|
|
|
|
static int typical_freq_flags[] = {
|
|
|
|
SNDRV_PCM_RATE_44100,
|
|
|
|
SNDRV_PCM_RATE_22050,
|
|
|
|
SNDRV_PCM_RATE_11025,
|
|
|
|
0,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* look up frequency table and fill bit mask */
|
|
|
|
runtime->hw.rates = 0;
|
|
|
|
fflags = chip->freqs_ok;
|
|
|
|
for (i = 0; typical_freqs[i]; i++) {
|
|
|
|
for (j = 0; j < chip->num_freqs; j++) {
|
|
|
|
if ((chip->freqs_ok & (1 << j)) &&
|
|
|
|
chip->freq_table[j] == typical_freqs[i]) {
|
|
|
|
runtime->hw.rates |= typical_freq_flags[i];
|
|
|
|
fflags &= ~(1 << j);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (fflags) /* rest */
|
|
|
|
runtime->hw.rates |= SNDRV_PCM_RATE_KNOT;
|
|
|
|
|
|
|
|
/* check for minimum and maximum rates */
|
|
|
|
for (i = 0; i < chip->num_freqs; i++) {
|
|
|
|
if (chip->freqs_ok & (1 << i)) {
|
|
|
|
runtime->hw.rate_max = chip->freq_table[i];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
for (i = chip->num_freqs - 1; i >= 0; i--) {
|
|
|
|
if (chip->freqs_ok & (1 << i)) {
|
|
|
|
runtime->hw.rate_min = chip->freq_table[i];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
runtime->hw.formats = chip->formats_ok;
|
|
|
|
if (chip->can_capture) {
|
|
|
|
if (! chip->can_duplex)
|
|
|
|
runtime->hw.info |= SNDRV_PCM_INFO_HALF_DUPLEX;
|
|
|
|
runtime->hw.info |= SNDRV_PCM_INFO_JOINT_DUPLEX;
|
|
|
|
}
|
|
|
|
runtime->private_data = rec;
|
|
|
|
rec->substream = subs;
|
|
|
|
|
|
|
|
#if 0 /* FIXME: still under development.. */
|
|
|
|
snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
|
|
|
|
snd_pmac_hw_rule_rate, chip, rec->stream, -1);
|
|
|
|
snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT,
|
|
|
|
snd_pmac_hw_rule_format, chip, rec->stream, -1);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
runtime->hw.periods_max = rec->cmd.size - 1;
|
|
|
|
|
|
|
|
if (chip->can_duplex)
|
|
|
|
snd_pcm_set_sync(subs);
|
|
|
|
|
|
|
|
/* constraints to fix choppy sound */
|
|
|
|
snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_pcm_close(struct snd_pmac *chip, struct pmac_stream *rec,
|
|
|
|
struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct pmac_stream *astr;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
snd_pmac_dma_stop(rec);
|
|
|
|
|
|
|
|
astr = snd_pmac_get_stream(chip, another_stream(rec->stream));
|
2005-10-10 17:46:31 +08:00
|
|
|
if (! astr)
|
|
|
|
return -EINVAL;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* reset constraints */
|
|
|
|
astr->cur_freqs = chip->freqs_ok;
|
|
|
|
astr->cur_formats = chip->formats_ok;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_playback_open(struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
subs->runtime->hw = snd_pmac_playback;
|
|
|
|
return snd_pmac_pcm_open(chip, &chip->playback, subs);
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_capture_open(struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
subs->runtime->hw = snd_pmac_capture;
|
|
|
|
return snd_pmac_pcm_open(chip, &chip->capture, subs);
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_playback_close(struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
return snd_pmac_pcm_close(chip, &chip->playback, subs);
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_capture_close(struct snd_pcm_substream *subs)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_pcm_substream_chip(subs);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
return snd_pmac_pcm_close(chip, &chip->capture, subs);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
*/
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static struct snd_pcm_ops snd_pmac_playback_ops = {
|
2005-04-17 06:20:36 +08:00
|
|
|
.open = snd_pmac_playback_open,
|
|
|
|
.close = snd_pmac_playback_close,
|
|
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
|
|
.hw_params = snd_pmac_pcm_hw_params,
|
|
|
|
.hw_free = snd_pmac_pcm_hw_free,
|
|
|
|
.prepare = snd_pmac_playback_prepare,
|
|
|
|
.trigger = snd_pmac_playback_trigger,
|
|
|
|
.pointer = snd_pmac_playback_pointer,
|
|
|
|
};
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static struct snd_pcm_ops snd_pmac_capture_ops = {
|
2005-04-17 06:20:36 +08:00
|
|
|
.open = snd_pmac_capture_open,
|
|
|
|
.close = snd_pmac_capture_close,
|
|
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
|
|
.hw_params = snd_pmac_pcm_hw_params,
|
|
|
|
.hw_free = snd_pmac_pcm_hw_free,
|
|
|
|
.prepare = snd_pmac_capture_prepare,
|
|
|
|
.trigger = snd_pmac_capture_trigger,
|
|
|
|
.pointer = snd_pmac_capture_pointer,
|
|
|
|
};
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
int __init snd_pmac_pcm_new(struct snd_pmac *chip)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pcm *pcm;
|
2005-04-17 06:20:36 +08:00
|
|
|
int err;
|
|
|
|
int num_captures = 1;
|
|
|
|
|
|
|
|
if (! chip->can_capture)
|
|
|
|
num_captures = 0;
|
|
|
|
err = snd_pcm_new(chip->card, chip->card->driver, 0, 1, num_captures, &pcm);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_pmac_playback_ops);
|
|
|
|
if (chip->can_capture)
|
|
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_pmac_capture_ops);
|
|
|
|
|
|
|
|
pcm->private_data = chip;
|
|
|
|
pcm->info_flags = SNDRV_PCM_INFO_JOINT_DUPLEX;
|
|
|
|
strcpy(pcm->name, chip->card->shortname);
|
|
|
|
chip->pcm = pcm;
|
|
|
|
|
|
|
|
chip->formats_ok = SNDRV_PCM_FMTBIT_S16_BE;
|
|
|
|
if (chip->can_byte_swap)
|
|
|
|
chip->formats_ok |= SNDRV_PCM_FMTBIT_S16_LE;
|
|
|
|
|
|
|
|
chip->playback.cur_formats = chip->formats_ok;
|
|
|
|
chip->capture.cur_formats = chip->formats_ok;
|
|
|
|
chip->playback.cur_freqs = chip->freqs_ok;
|
|
|
|
chip->capture.cur_freqs = chip->freqs_ok;
|
|
|
|
|
|
|
|
/* preallocate 64k buffer */
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
|
|
|
|
&chip->pdev->dev,
|
2005-04-17 06:20:36 +08:00
|
|
|
64 * 1024, 64 * 1024);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static void snd_pmac_dbdma_reset(struct snd_pmac *chip)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
out_le32(&chip->playback.dma->control, (RUN|PAUSE|FLUSH|WAKE|DEAD) << 16);
|
|
|
|
snd_pmac_wait_ack(&chip->playback);
|
|
|
|
out_le32(&chip->capture.dma->control, (RUN|PAUSE|FLUSH|WAKE|DEAD) << 16);
|
|
|
|
snd_pmac_wait_ack(&chip->capture);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* handling beep
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
void snd_pmac_beep_dma_start(struct snd_pmac *chip, int bytes, unsigned long addr, int speed)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct pmac_stream *rec = &chip->playback;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
snd_pmac_dma_stop(rec);
|
|
|
|
st_le16(&chip->extra_dma.cmds->req_count, bytes);
|
|
|
|
st_le16(&chip->extra_dma.cmds->xfer_status, 0);
|
|
|
|
st_le32(&chip->extra_dma.cmds->cmd_dep, chip->extra_dma.addr);
|
|
|
|
st_le32(&chip->extra_dma.cmds->phy_addr, addr);
|
|
|
|
st_le16(&chip->extra_dma.cmds->command, OUTPUT_MORE + BR_ALWAYS);
|
|
|
|
out_le32(&chip->awacs->control,
|
|
|
|
(in_le32(&chip->awacs->control) & ~0x1f00)
|
|
|
|
| (speed << 8));
|
|
|
|
out_le32(&chip->awacs->byteswap, 0);
|
|
|
|
snd_pmac_dma_set_command(rec, &chip->extra_dma);
|
|
|
|
snd_pmac_dma_run(rec, RUN);
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
void snd_pmac_beep_dma_stop(struct snd_pmac *chip)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
snd_pmac_dma_stop(&chip->playback);
|
|
|
|
st_le16(&chip->extra_dma.cmds->command, DBDMA_STOP);
|
|
|
|
snd_pmac_pcm_set_format(chip); /* reset format */
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* interrupt handlers
|
|
|
|
*/
|
|
|
|
static irqreturn_t
|
|
|
|
snd_pmac_tx_intr(int irq, void *devid, struct pt_regs *regs)
|
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = devid;
|
2005-04-17 06:20:36 +08:00
|
|
|
snd_pmac_pcm_update(chip, &chip->playback);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static irqreturn_t
|
|
|
|
snd_pmac_rx_intr(int irq, void *devid, struct pt_regs *regs)
|
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = devid;
|
2005-04-17 06:20:36 +08:00
|
|
|
snd_pmac_pcm_update(chip, &chip->capture);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static irqreturn_t
|
|
|
|
snd_pmac_ctrl_intr(int irq, void *devid, struct pt_regs *regs)
|
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = devid;
|
2005-04-17 06:20:36 +08:00
|
|
|
int ctrl = in_le32(&chip->awacs->control);
|
|
|
|
|
|
|
|
/*printk("pmac: control interrupt.. 0x%x\n", ctrl);*/
|
|
|
|
if (ctrl & MASK_PORTCHG) {
|
|
|
|
/* do something when headphone is plugged/unplugged? */
|
|
|
|
if (chip->update_automute)
|
|
|
|
chip->update_automute(chip, 1);
|
|
|
|
}
|
|
|
|
if (ctrl & MASK_CNTLERR) {
|
|
|
|
int err = (in_le32(&chip->awacs->codec_stat) & MASK_ERRCODE) >> 16;
|
|
|
|
if (err && chip->model <= PMAC_SCREAMER)
|
|
|
|
snd_printk(KERN_DEBUG "error %x\n", err);
|
|
|
|
}
|
|
|
|
/* Writing 1s to the CNTLERR and PORTCHG bits clears them... */
|
|
|
|
out_le32(&chip->awacs->control, ctrl);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* a wrapper to feature call for compatibility
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static void snd_pmac_sound_feature(struct snd_pmac *chip, int enable)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-08-17 18:36:35 +08:00
|
|
|
if (ppc_md.feature_call)
|
|
|
|
ppc_md.feature_call(PMAC_FTR_SOUND_CHIP_ENABLE, chip->node, 0, enable);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* release resources
|
|
|
|
*/
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_free(struct snd_pmac *chip)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
/* stop sounds */
|
|
|
|
if (chip->initialized) {
|
|
|
|
snd_pmac_dbdma_reset(chip);
|
|
|
|
/* disable interrupts from awacs interface */
|
|
|
|
out_le32(&chip->awacs->control, in_le32(&chip->awacs->control) & 0xfff);
|
|
|
|
}
|
|
|
|
|
|
|
|
snd_pmac_sound_feature(chip, 0);
|
|
|
|
|
|
|
|
/* clean up mixer if any */
|
|
|
|
if (chip->mixer_free)
|
|
|
|
chip->mixer_free(chip);
|
|
|
|
|
|
|
|
snd_pmac_detach_beep(chip);
|
|
|
|
|
|
|
|
/* release resources */
|
|
|
|
if (chip->irq >= 0)
|
|
|
|
free_irq(chip->irq, (void*)chip);
|
|
|
|
if (chip->tx_irq >= 0)
|
|
|
|
free_irq(chip->tx_irq, (void*)chip);
|
|
|
|
if (chip->rx_irq >= 0)
|
|
|
|
free_irq(chip->rx_irq, (void*)chip);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
snd_pmac_dbdma_free(chip, &chip->playback.cmd);
|
|
|
|
snd_pmac_dbdma_free(chip, &chip->capture.cmd);
|
|
|
|
snd_pmac_dbdma_free(chip, &chip->extra_dma);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (chip->macio_base)
|
|
|
|
iounmap(chip->macio_base);
|
|
|
|
if (chip->latch_base)
|
|
|
|
iounmap(chip->latch_base);
|
|
|
|
if (chip->awacs)
|
|
|
|
iounmap(chip->awacs);
|
|
|
|
if (chip->playback.dma)
|
|
|
|
iounmap(chip->playback.dma);
|
|
|
|
if (chip->capture.dma)
|
|
|
|
iounmap(chip->capture.dma);
|
2005-12-13 15:01:21 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
if (chip->node) {
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
int i;
|
2005-04-17 06:20:36 +08:00
|
|
|
for (i = 0; i < 3; i++) {
|
2005-12-13 15:01:21 +08:00
|
|
|
if (chip->requested & (1 << i))
|
|
|
|
release_mem_region(chip->rsrc[i].start,
|
|
|
|
chip->rsrc[i].end -
|
|
|
|
chip->rsrc[i].start + 1);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
}
|
2005-12-13 15:01:21 +08:00
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
if (chip->pdev)
|
|
|
|
pci_dev_put(chip->pdev);
|
2005-04-17 06:20:36 +08:00
|
|
|
kfree(chip);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* free the device
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static int snd_pmac_dev_free(struct snd_device *device)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = device->device_data;
|
2005-04-17 06:20:36 +08:00
|
|
|
return snd_pmac_free(chip);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* check the machine support byteswap (little-endian)
|
|
|
|
*/
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static void __init detect_byte_swap(struct snd_pmac *chip)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
struct device_node *mio;
|
|
|
|
|
|
|
|
/* if seems that Keylargo can't byte-swap */
|
|
|
|
for (mio = chip->node->parent; mio; mio = mio->parent) {
|
|
|
|
if (strcmp(mio->name, "mac-io") == 0) {
|
|
|
|
if (device_is_compatible(mio, "Keylargo"))
|
|
|
|
chip->can_byte_swap = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* it seems the Pismo & iBook can't byte-swap in hardware. */
|
|
|
|
if (machine_is_compatible("PowerBook3,1") ||
|
|
|
|
machine_is_compatible("PowerBook2,1"))
|
|
|
|
chip->can_byte_swap = 0 ;
|
|
|
|
|
|
|
|
if (machine_is_compatible("PowerBook2,1"))
|
|
|
|
chip->can_duplex = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* detect a sound chip
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static int __init snd_pmac_detect(struct snd_pmac *chip)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-05-18 22:31:51 +08:00
|
|
|
struct device_node *sound = NULL;
|
2005-04-17 06:20:36 +08:00
|
|
|
unsigned int *prop, l;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
struct macio_chip* macio;
|
|
|
|
|
2006-03-28 20:15:54 +08:00
|
|
|
if (!machine_is(powermac))
|
2005-04-17 06:20:36 +08:00
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
chip->subframe = 0;
|
|
|
|
chip->revision = 0;
|
|
|
|
chip->freqs_ok = 0xff; /* all ok */
|
|
|
|
chip->model = PMAC_AWACS;
|
|
|
|
chip->can_byte_swap = 1;
|
|
|
|
chip->can_duplex = 1;
|
|
|
|
chip->can_capture = 1;
|
|
|
|
chip->num_freqs = ARRAY_SIZE(awacs_freqs);
|
|
|
|
chip->freq_table = awacs_freqs;
|
2006-02-08 12:04:18 +08:00
|
|
|
chip->pdev = NULL;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
chip->control_mask = MASK_IEPC | MASK_IEE | 0x11; /* default */
|
|
|
|
|
|
|
|
/* check machine type */
|
|
|
|
if (machine_is_compatible("AAPL,3400/2400")
|
|
|
|
|| machine_is_compatible("AAPL,3500"))
|
|
|
|
chip->is_pbook_3400 = 1;
|
|
|
|
else if (machine_is_compatible("PowerBook1,1")
|
|
|
|
|| machine_is_compatible("AAPL,PowerBook1998"))
|
|
|
|
chip->is_pbook_G3 = 1;
|
|
|
|
chip->node = find_devices("awacs");
|
|
|
|
if (chip->node)
|
2005-05-18 22:31:51 +08:00
|
|
|
sound = chip->node;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* powermac G3 models have a node called "davbus"
|
|
|
|
* with a child called "sound".
|
|
|
|
*/
|
2005-05-18 22:31:51 +08:00
|
|
|
if (!chip->node)
|
|
|
|
chip->node = find_devices("davbus");
|
2005-04-17 06:20:36 +08:00
|
|
|
/*
|
|
|
|
* if we didn't find a davbus device, try 'i2s-a' since
|
|
|
|
* this seems to be what iBooks have
|
|
|
|
*/
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
if (! chip->node) {
|
2005-04-17 06:20:36 +08:00
|
|
|
chip->node = find_devices("i2s-a");
|
2005-05-18 22:31:51 +08:00
|
|
|
if (chip->node && chip->node->parent &&
|
|
|
|
chip->node->parent->parent) {
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
if (device_is_compatible(chip->node->parent->parent,
|
|
|
|
"K2-Keylargo"))
|
|
|
|
chip->is_k2 = 1;
|
|
|
|
}
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
if (! chip->node)
|
|
|
|
return -ENODEV;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
|
2005-05-18 22:31:51 +08:00
|
|
|
if (!sound) {
|
|
|
|
sound = find_devices("sound");
|
|
|
|
while (sound && sound->parent != chip->node)
|
|
|
|
sound = sound->next;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
if (! sound)
|
|
|
|
return -ENODEV;
|
|
|
|
prop = (unsigned int *) get_property(sound, "sub-frame", NULL);
|
|
|
|
if (prop && *prop < 16)
|
|
|
|
chip->subframe = *prop;
|
2005-04-17 06:24:31 +08:00
|
|
|
prop = (unsigned int *) get_property(sound, "layout-id", NULL);
|
2006-06-21 21:43:44 +08:00
|
|
|
if (prop) {
|
|
|
|
/* partly deprecate snd-powermac, for those machines
|
|
|
|
* that have a layout-id property for now */
|
|
|
|
printk(KERN_INFO "snd-powermac no longer handles any "
|
|
|
|
"machines with a layout-id property "
|
|
|
|
"in the device-tree, use snd-aoa.\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
/* This should be verified on older screamers */
|
|
|
|
if (device_is_compatible(sound, "screamer")) {
|
|
|
|
chip->model = PMAC_SCREAMER;
|
|
|
|
// chip->can_byte_swap = 0; /* FIXME: check this */
|
|
|
|
}
|
|
|
|
if (device_is_compatible(sound, "burgundy")) {
|
|
|
|
chip->model = PMAC_BURGUNDY;
|
|
|
|
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
|
|
|
|
}
|
|
|
|
if (device_is_compatible(sound, "daca")) {
|
|
|
|
chip->model = PMAC_DACA;
|
|
|
|
chip->can_capture = 0; /* no capture */
|
|
|
|
chip->can_duplex = 0;
|
|
|
|
// chip->can_byte_swap = 0; /* FIXME: check this */
|
|
|
|
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
|
|
|
|
}
|
|
|
|
if (device_is_compatible(sound, "tumbler")) {
|
|
|
|
chip->model = PMAC_TUMBLER;
|
|
|
|
chip->can_capture = 0; /* no capture */
|
|
|
|
chip->can_duplex = 0;
|
|
|
|
// chip->can_byte_swap = 0; /* FIXME: check this */
|
|
|
|
chip->num_freqs = ARRAY_SIZE(tumbler_freqs);
|
|
|
|
chip->freq_table = tumbler_freqs;
|
|
|
|
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
|
|
|
|
}
|
|
|
|
if (device_is_compatible(sound, "snapper")) {
|
|
|
|
chip->model = PMAC_SNAPPER;
|
|
|
|
// chip->can_byte_swap = 0; /* FIXME: check this */
|
|
|
|
chip->num_freqs = ARRAY_SIZE(tumbler_freqs);
|
|
|
|
chip->freq_table = tumbler_freqs;
|
|
|
|
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
|
|
|
|
}
|
|
|
|
prop = (unsigned int *)get_property(sound, "device-id", NULL);
|
|
|
|
if (prop)
|
|
|
|
chip->device_id = *prop;
|
|
|
|
chip->has_iic = (find_devices("perch") != NULL);
|
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
/* We need the PCI device for DMA allocations, let's use a crude method
|
|
|
|
* for now ...
|
|
|
|
*/
|
|
|
|
macio = macio_find(chip->node, macio_unknown);
|
|
|
|
if (macio == NULL)
|
|
|
|
printk(KERN_WARNING "snd-powermac: can't locate macio !\n");
|
|
|
|
else {
|
|
|
|
struct pci_dev *pdev = NULL;
|
|
|
|
|
|
|
|
for_each_pci_dev(pdev) {
|
|
|
|
struct device_node *np = pci_device_to_OF_node(pdev);
|
|
|
|
if (np && np == macio->of_node) {
|
|
|
|
chip->pdev = pdev;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (chip->pdev == NULL)
|
2005-05-18 22:31:51 +08:00
|
|
|
printk(KERN_WARNING "snd-powermac: can't locate macio PCI"
|
|
|
|
" device !\n");
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
detect_byte_swap(chip);
|
|
|
|
|
|
|
|
/* look for a property saying what sample rates
|
|
|
|
are available */
|
|
|
|
prop = (unsigned int *) get_property(sound, "sample-rates", &l);
|
|
|
|
if (! prop)
|
2005-05-18 22:31:51 +08:00
|
|
|
prop = (unsigned int *) get_property(sound,
|
|
|
|
"output-frame-rates", &l);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (prop) {
|
|
|
|
int i;
|
|
|
|
chip->freqs_ok = 0;
|
|
|
|
for (l /= sizeof(int); l > 0; --l) {
|
|
|
|
unsigned int r = *prop++;
|
|
|
|
/* Apple 'Fixed' format */
|
|
|
|
if (r >= 0x10000)
|
|
|
|
r >>= 16;
|
|
|
|
for (i = 0; i < chip->num_freqs; ++i) {
|
|
|
|
if (r == chip->freq_table[i]) {
|
|
|
|
chip->freqs_ok |= (1 << i);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* assume only 44.1khz */
|
|
|
|
chip->freqs_ok = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* exported - boolean info callbacks for ease of programming
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
int snd_pmac_boolean_stereo_info(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_info *uinfo)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
|
|
|
|
uinfo->count = 2;
|
|
|
|
uinfo->value.integer.min = 0;
|
|
|
|
uinfo->value.integer.max = 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
int snd_pmac_boolean_mono_info(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_info *uinfo)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
|
|
|
|
uinfo->count = 1;
|
|
|
|
uinfo->value.integer.min = 0;
|
|
|
|
uinfo->value.integer.max = 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef PMAC_SUPPORT_AUTOMUTE
|
|
|
|
/*
|
|
|
|
* auto-mute
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
static int pmac_auto_mute_get(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
2005-04-17 06:20:36 +08:00
|
|
|
ucontrol->value.integer.value[0] = chip->auto_mute;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int pmac_auto_mute_put(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (ucontrol->value.integer.value[0] != chip->auto_mute) {
|
|
|
|
chip->auto_mute = ucontrol->value.integer.value[0];
|
|
|
|
if (chip->update_automute)
|
|
|
|
chip->update_automute(chip, 1);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static int pmac_hp_detect_get(struct snd_kcontrol *kcontrol,
|
|
|
|
struct snd_ctl_elem_value *ucontrol)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip = snd_kcontrol_chip(kcontrol);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (chip->detect_headphone)
|
|
|
|
ucontrol->value.integer.value[0] = chip->detect_headphone(chip);
|
|
|
|
else
|
|
|
|
ucontrol->value.integer.value[0] = 0;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
static struct snd_kcontrol_new auto_mute_controls[] __initdata = {
|
2005-04-17 06:20:36 +08:00
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "Auto Mute Switch",
|
|
|
|
.info = snd_pmac_boolean_mono_info,
|
|
|
|
.get = pmac_auto_mute_get,
|
|
|
|
.put = pmac_auto_mute_put,
|
|
|
|
},
|
|
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
|
|
.name = "Headphone Detection",
|
|
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ,
|
|
|
|
.info = snd_pmac_boolean_mono_info,
|
|
|
|
.get = pmac_hp_detect_get,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2005-11-17 22:09:46 +08:00
|
|
|
int __init snd_pmac_add_automute(struct snd_pmac *chip)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
int err;
|
|
|
|
chip->auto_mute = 1;
|
|
|
|
err = snd_ctl_add(chip->card, snd_ctl_new1(&auto_mute_controls[0], chip));
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
if (err < 0) {
|
|
|
|
printk(KERN_ERR "snd-powermac: Failed to add automute control\n");
|
2005-04-17 06:20:36 +08:00
|
|
|
return err;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
chip->hp_detect_ctl = snd_ctl_new1(&auto_mute_controls[1], chip);
|
|
|
|
return snd_ctl_add(chip->card, chip->hp_detect_ctl);
|
|
|
|
}
|
|
|
|
#endif /* PMAC_SUPPORT_AUTOMUTE */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* create and detect a pmac chip record
|
|
|
|
*/
|
2005-11-17 22:09:46 +08:00
|
|
|
int __init snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2005-11-17 22:09:46 +08:00
|
|
|
struct snd_pmac *chip;
|
2005-04-17 06:20:36 +08:00
|
|
|
struct device_node *np;
|
|
|
|
int i, err;
|
2006-07-03 19:36:01 +08:00
|
|
|
unsigned int irq;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
unsigned long ctrl_addr, txdma_addr, rxdma_addr;
|
2005-11-17 22:09:46 +08:00
|
|
|
static struct snd_device_ops ops = {
|
2005-04-17 06:20:36 +08:00
|
|
|
.dev_free = snd_pmac_dev_free,
|
|
|
|
};
|
|
|
|
|
|
|
|
*chip_return = NULL;
|
|
|
|
|
[ALSA] Replace with kzalloc() - others
Documentation,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,OPL3
OPL4,Digigram VX core,I2C cs8427,I2C lib core,I2C tea6330t,L3 drivers
AK4114 receiver,AK4117 receiver,PDAudioCF driver,PPC PMAC driver
SPARC AMD7930 driver,SPARC cs4231 driver,Synth,Common EMU synth
USB generic driver,USB USX2Y
Replace kcalloc(1,..) with kzalloc().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-09 20:22:34 +08:00
|
|
|
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (chip == NULL)
|
|
|
|
return -ENOMEM;
|
|
|
|
chip->card = card;
|
|
|
|
|
|
|
|
spin_lock_init(&chip->reg_lock);
|
|
|
|
chip->irq = chip->tx_irq = chip->rx_irq = -1;
|
|
|
|
|
|
|
|
chip->playback.stream = SNDRV_PCM_STREAM_PLAYBACK;
|
|
|
|
chip->capture.stream = SNDRV_PCM_STREAM_CAPTURE;
|
|
|
|
|
|
|
|
if ((err = snd_pmac_detect(chip)) < 0)
|
|
|
|
goto __error;
|
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
if (snd_pmac_dbdma_alloc(chip, &chip->playback.cmd, PMAC_MAX_FRAGS + 1) < 0 ||
|
|
|
|
snd_pmac_dbdma_alloc(chip, &chip->capture.cmd, PMAC_MAX_FRAGS + 1) < 0 ||
|
|
|
|
snd_pmac_dbdma_alloc(chip, &chip->extra_dma, 2) < 0) {
|
2005-04-17 06:20:36 +08:00
|
|
|
err = -ENOMEM;
|
|
|
|
goto __error;
|
|
|
|
}
|
|
|
|
|
|
|
|
np = chip->node;
|
2005-12-13 15:01:21 +08:00
|
|
|
chip->requested = 0;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
if (chip->is_k2) {
|
2005-12-13 15:01:21 +08:00
|
|
|
static char *rnames[] = {
|
|
|
|
"Sound Control", "Sound DMA" };
|
|
|
|
for (i = 0; i < 2; i ++) {
|
|
|
|
if (of_address_to_resource(np->parent, i,
|
|
|
|
&chip->rsrc[i])) {
|
|
|
|
printk(KERN_ERR "snd: can't translate rsrc "
|
|
|
|
" %d (%s)\n", i, rnames[i]);
|
|
|
|
err = -ENODEV;
|
|
|
|
goto __error;
|
|
|
|
}
|
|
|
|
if (request_mem_region(chip->rsrc[i].start,
|
|
|
|
chip->rsrc[i].end -
|
|
|
|
chip->rsrc[i].start + 1,
|
|
|
|
rnames[i]) == NULL) {
|
|
|
|
printk(KERN_ERR "snd: can't request rsrc "
|
2006-07-02 09:55:03 +08:00
|
|
|
" %d (%s: 0x%016llx:%016llx)\n",
|
2006-06-13 05:50:27 +08:00
|
|
|
i, rnames[i],
|
|
|
|
(unsigned long long)chip->rsrc[i].start,
|
|
|
|
(unsigned long long)chip->rsrc[i].end);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
err = -ENODEV;
|
|
|
|
goto __error;
|
|
|
|
}
|
2005-12-13 15:01:21 +08:00
|
|
|
chip->requested |= (1 << i);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
}
|
2005-12-13 15:01:21 +08:00
|
|
|
ctrl_addr = chip->rsrc[0].start;
|
|
|
|
txdma_addr = chip->rsrc[1].start;
|
|
|
|
rxdma_addr = txdma_addr + 0x100;
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
} else {
|
2005-12-13 15:01:21 +08:00
|
|
|
static char *rnames[] = {
|
|
|
|
"Sound Control", "Sound Tx DMA", "Sound Rx DMA" };
|
|
|
|
for (i = 0; i < 3; i ++) {
|
2006-02-01 19:04:43 +08:00
|
|
|
if (of_address_to_resource(np, i,
|
2005-12-13 15:01:21 +08:00
|
|
|
&chip->rsrc[i])) {
|
|
|
|
printk(KERN_ERR "snd: can't translate rsrc "
|
|
|
|
" %d (%s)\n", i, rnames[i]);
|
|
|
|
err = -ENODEV;
|
|
|
|
goto __error;
|
|
|
|
}
|
|
|
|
if (request_mem_region(chip->rsrc[i].start,
|
|
|
|
chip->rsrc[i].end -
|
|
|
|
chip->rsrc[i].start + 1,
|
|
|
|
rnames[i]) == NULL) {
|
|
|
|
printk(KERN_ERR "snd: can't request rsrc "
|
2006-06-13 05:50:27 +08:00
|
|
|
" %d (%s: 0x%016llx:%016llx)\n",
|
|
|
|
i, rnames[i],
|
|
|
|
(unsigned long long)chip->rsrc[i].start,
|
|
|
|
(unsigned long long)chip->rsrc[i].end);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
err = -ENODEV;
|
|
|
|
goto __error;
|
|
|
|
}
|
2005-12-13 15:01:21 +08:00
|
|
|
chip->requested |= (1 << i);
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
}
|
2005-12-13 15:01:21 +08:00
|
|
|
ctrl_addr = chip->rsrc[0].start;
|
|
|
|
txdma_addr = chip->rsrc[1].start;
|
|
|
|
rxdma_addr = chip->rsrc[2].start;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
chip->awacs = ioremap(ctrl_addr, 0x1000);
|
|
|
|
chip->playback.dma = ioremap(txdma_addr, 0x100);
|
|
|
|
chip->capture.dma = ioremap(rxdma_addr, 0x100);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (chip->model <= PMAC_BURGUNDY) {
|
2006-07-03 19:36:01 +08:00
|
|
|
irq = irq_of_parse_and_map(np, 0);
|
|
|
|
if (request_irq(irq, snd_pmac_ctrl_intr, 0,
|
2005-04-17 06:20:36 +08:00
|
|
|
"PMac", (void*)chip)) {
|
2006-07-03 19:36:01 +08:00
|
|
|
snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n",
|
|
|
|
irq);
|
2005-04-17 06:20:36 +08:00
|
|
|
err = -EBUSY;
|
|
|
|
goto __error;
|
|
|
|
}
|
2006-07-03 19:36:01 +08:00
|
|
|
chip->irq = irq;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2006-07-03 19:36:01 +08:00
|
|
|
irq = irq_of_parse_and_map(np, 1);
|
|
|
|
if (request_irq(irq, snd_pmac_tx_intr, 0, "PMac Output", (void*)chip)){
|
|
|
|
snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", irq);
|
2005-04-17 06:20:36 +08:00
|
|
|
err = -EBUSY;
|
|
|
|
goto __error;
|
|
|
|
}
|
2006-07-03 19:36:01 +08:00
|
|
|
chip->tx_irq = irq;
|
|
|
|
irq = irq_of_parse_and_map(np, 2);
|
|
|
|
if (request_irq(irq, snd_pmac_rx_intr, 0, "PMac Input", (void*)chip)) {
|
|
|
|
snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", irq);
|
2005-04-17 06:20:36 +08:00
|
|
|
err = -EBUSY;
|
|
|
|
goto __error;
|
|
|
|
}
|
2006-07-03 19:36:01 +08:00
|
|
|
chip->rx_irq = irq;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
snd_pmac_sound_feature(chip, 1);
|
|
|
|
|
|
|
|
/* reset */
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
if (chip->model == PMAC_AWACS)
|
|
|
|
out_le32(&chip->awacs->control, 0x11);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/* Powerbooks have odd ways of enabling inputs such as
|
|
|
|
an expansion-bay CD or sound from an internal modem
|
|
|
|
or a PC-card modem. */
|
|
|
|
if (chip->is_pbook_3400) {
|
|
|
|
/* Enable CD and PC-card sound inputs. */
|
|
|
|
/* This is done by reading from address
|
|
|
|
* f301a000, + 0x10 to enable the expansion-bay
|
|
|
|
* CD sound input, + 0x80 to enable the PC-card
|
|
|
|
* sound input. The 0x100 enables the SCSI bus
|
|
|
|
* terminator power.
|
|
|
|
*/
|
|
|
|
chip->latch_base = ioremap (0xf301a000, 0x1000);
|
|
|
|
in_8(chip->latch_base + 0x190);
|
|
|
|
} else if (chip->is_pbook_G3) {
|
|
|
|
struct device_node* mio;
|
|
|
|
for (mio = chip->node->parent; mio; mio = mio->parent) {
|
2005-12-13 15:01:21 +08:00
|
|
|
if (strcmp(mio->name, "mac-io") == 0) {
|
|
|
|
struct resource r;
|
|
|
|
if (of_address_to_resource(mio, 0, &r) == 0)
|
|
|
|
chip->macio_base =
|
|
|
|
ioremap(r.start, 0x40);
|
2005-04-17 06:20:36 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* Enable CD sound input. */
|
|
|
|
/* The relevant bits for writing to this byte are 0x8f.
|
|
|
|
* I haven't found out what the 0x80 bit does.
|
|
|
|
* For the 0xf bits, writing 3 or 7 enables the CD
|
|
|
|
* input, any other value disables it. Values
|
|
|
|
* 1, 3, 5, 7 enable the microphone. Values 0, 2,
|
|
|
|
* 4, 6, 8 - f enable the input from the modem.
|
|
|
|
*/
|
|
|
|
if (chip->macio_base)
|
|
|
|
out_8(chip->macio_base + 0x37, 3);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reset dbdma channels */
|
|
|
|
snd_pmac_dbdma_reset(chip);
|
|
|
|
|
|
|
|
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0)
|
|
|
|
goto __error;
|
|
|
|
|
|
|
|
*chip_return = chip;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
__error:
|
[PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s. It has severe limitations
though:
- Only 44100Khz 16 bits
- Only work on G5 models using a TAS3004 analog code, that is early
single CPU desktops and all dual CPU desktops at this date, but none
of the more recent ones like iMac G5.
- It does analog only, no digital/SPDIF support at all, no native
AC3 support
Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...
This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).
Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer. So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.
Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack. If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:32 +08:00
|
|
|
if (chip->pdev)
|
|
|
|
pci_dev_put(chip->pdev);
|
2005-04-17 06:20:36 +08:00
|
|
|
snd_pmac_free(chip);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* sleep notify for powerbook
|
|
|
|
*/
|
|
|
|
|
2005-06-28 05:36:34 +08:00
|
|
|
#ifdef CONFIG_PM
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Save state when going to sleep, restore it afterwards.
|
|
|
|
*/
|
|
|
|
|
2005-11-18 00:17:08 +08:00
|
|
|
void snd_pmac_suspend(struct snd_pmac *chip)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
2005-11-18 00:17:08 +08:00
|
|
|
snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot);
|
2005-04-17 06:20:36 +08:00
|
|
|
if (chip->suspend)
|
|
|
|
chip->suspend(chip);
|
|
|
|
snd_pcm_suspend_all(chip->pcm);
|
|
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
|
|
|
snd_pmac_beep_stop(chip);
|
|
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
|
|
if (chip->irq >= 0)
|
|
|
|
disable_irq(chip->irq);
|
|
|
|
if (chip->tx_irq >= 0)
|
|
|
|
disable_irq(chip->tx_irq);
|
|
|
|
if (chip->rx_irq >= 0)
|
|
|
|
disable_irq(chip->rx_irq);
|
|
|
|
snd_pmac_sound_feature(chip, 0);
|
|
|
|
}
|
|
|
|
|
2005-11-18 00:17:08 +08:00
|
|
|
void snd_pmac_resume(struct snd_pmac *chip)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
snd_pmac_sound_feature(chip, 1);
|
|
|
|
if (chip->resume)
|
|
|
|
chip->resume(chip);
|
|
|
|
/* enable CD sound input */
|
2005-11-18 00:17:08 +08:00
|
|
|
if (chip->macio_base && chip->is_pbook_G3)
|
2005-04-17 06:20:36 +08:00
|
|
|
out_8(chip->macio_base + 0x37, 3);
|
2005-11-18 00:17:08 +08:00
|
|
|
else if (chip->is_pbook_3400)
|
2005-04-17 06:20:36 +08:00
|
|
|
in_8(chip->latch_base + 0x190);
|
|
|
|
|
|
|
|
snd_pmac_pcm_set_format(chip);
|
|
|
|
|
|
|
|
if (chip->irq >= 0)
|
|
|
|
enable_irq(chip->irq);
|
|
|
|
if (chip->tx_irq >= 0)
|
|
|
|
enable_irq(chip->tx_irq);
|
|
|
|
if (chip->rx_irq >= 0)
|
|
|
|
enable_irq(chip->rx_irq);
|
|
|
|
|
2005-11-18 00:17:08 +08:00
|
|
|
snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2005-06-28 05:36:34 +08:00
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
|