linux_old1/block/kyber-iosched.c

996 lines
25 KiB
C
Raw Normal View History

blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
/*
* The Kyber I/O scheduler. Controls latency by throttling queue depths using
* scalable techniques.
*
* Copyright (C) 2017 Facebook
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License v2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/blkdev.h>
#include <linux/blk-mq.h>
#include <linux/elevator.h>
#include <linux/module.h>
#include <linux/sbitmap.h>
#include "blk.h"
#include "blk-mq.h"
#include "blk-mq-debugfs.h"
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
#include "blk-mq-sched.h"
#include "blk-mq-tag.h"
#include "blk-stat.h"
/* Scheduling domains. */
enum {
KYBER_READ,
KYBER_SYNC_WRITE,
KYBER_OTHER, /* Async writes, discard, etc. */
KYBER_NUM_DOMAINS,
};
enum {
KYBER_MIN_DEPTH = 256,
/*
* In order to prevent starvation of synchronous requests by a flood of
* asynchronous requests, we reserve 25% of requests for synchronous
* operations.
*/
KYBER_ASYNC_PERCENT = 75,
};
/*
* Initial device-wide depths for each scheduling domain.
*
* Even for fast devices with lots of tags like NVMe, you can saturate
* the device with only a fraction of the maximum possible queue depth.
* So, we cap these to a reasonable value.
*/
static const unsigned int kyber_depth[] = {
[KYBER_READ] = 256,
[KYBER_SYNC_WRITE] = 128,
[KYBER_OTHER] = 64,
};
/*
* Scheduling domain batch sizes. We favor reads.
*/
static const unsigned int kyber_batch_size[] = {
[KYBER_READ] = 16,
[KYBER_SYNC_WRITE] = 8,
[KYBER_OTHER] = 8,
};
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
/*
* There is a same mapping between ctx & hctx and kcq & khd,
* we use request->mq_ctx->index_hw to index the kcq in khd.
*/
struct kyber_ctx_queue {
/*
* Used to ensure operations on rq_list and kcq_map to be an atmoic one.
* Also protect the rqs on rq_list when merge.
*/
spinlock_t lock;
struct list_head rq_list[KYBER_NUM_DOMAINS];
} ____cacheline_aligned_in_smp;
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
struct kyber_queue_data {
struct request_queue *q;
struct blk_stat_callback *cb;
/*
* The device is divided into multiple scheduling domains based on the
* request type. Each domain has a fixed number of in-flight requests of
* that type device-wide, limited by these tokens.
*/
struct sbitmap_queue domain_tokens[KYBER_NUM_DOMAINS];
/*
* Async request percentage, converted to per-word depth for
* sbitmap_get_shallow().
*/
unsigned int async_depth;
/* Target latencies in nanoseconds. */
u64 read_lat_nsec, write_lat_nsec;
};
struct kyber_hctx_data {
spinlock_t lock;
struct list_head rqs[KYBER_NUM_DOMAINS];
unsigned int cur_domain;
unsigned int batching;
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
struct kyber_ctx_queue *kcqs;
struct sbitmap kcq_map[KYBER_NUM_DOMAINS];
wait_queue_entry_t domain_wait[KYBER_NUM_DOMAINS];
struct sbq_wait_state *domain_ws[KYBER_NUM_DOMAINS];
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
atomic_t wait_index[KYBER_NUM_DOMAINS];
};
static int kyber_domain_wake(wait_queue_entry_t *wait, unsigned mode, int flags,
void *key);
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
static unsigned int kyber_sched_domain(unsigned int op)
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
{
if ((op & REQ_OP_MASK) == REQ_OP_READ)
return KYBER_READ;
else if ((op & REQ_OP_MASK) == REQ_OP_WRITE && op_is_sync(op))
return KYBER_SYNC_WRITE;
else
return KYBER_OTHER;
}
enum {
NONE = 0,
GOOD = 1,
GREAT = 2,
BAD = -1,
AWFUL = -2,
};
#define IS_GOOD(status) ((status) > 0)
#define IS_BAD(status) ((status) < 0)
static int kyber_lat_status(struct blk_stat_callback *cb,
unsigned int sched_domain, u64 target)
{
u64 latency;
if (!cb->stat[sched_domain].nr_samples)
return NONE;
latency = cb->stat[sched_domain].mean;
if (latency >= 2 * target)
return AWFUL;
else if (latency > target)
return BAD;
else if (latency <= target / 2)
return GREAT;
else /* (latency <= target) */
return GOOD;
}
/*
* Adjust the read or synchronous write depth given the status of reads and
* writes. The goal is that the latencies of the two domains are fair (i.e., if
* one is good, then the other is good).
*/
static void kyber_adjust_rw_depth(struct kyber_queue_data *kqd,
unsigned int sched_domain, int this_status,
int other_status)
{
unsigned int orig_depth, depth;
/*
* If this domain had no samples, or reads and writes are both good or
* both bad, don't adjust the depth.
*/
if (this_status == NONE ||
(IS_GOOD(this_status) && IS_GOOD(other_status)) ||
(IS_BAD(this_status) && IS_BAD(other_status)))
return;
orig_depth = depth = kqd->domain_tokens[sched_domain].sb.depth;
if (other_status == NONE) {
depth++;
} else {
switch (this_status) {
case GOOD:
if (other_status == AWFUL)
depth -= max(depth / 4, 1U);
else
depth -= max(depth / 8, 1U);
break;
case GREAT:
if (other_status == AWFUL)
depth /= 2;
else
depth -= max(depth / 4, 1U);
break;
case BAD:
depth++;
break;
case AWFUL:
if (other_status == GREAT)
depth += 2;
else
depth++;
break;
}
}
depth = clamp(depth, 1U, kyber_depth[sched_domain]);
if (depth != orig_depth)
sbitmap_queue_resize(&kqd->domain_tokens[sched_domain], depth);
}
/*
* Adjust the depth of other requests given the status of reads and synchronous
* writes. As long as either domain is doing fine, we don't throttle, but if
* both domains are doing badly, we throttle heavily.
*/
static void kyber_adjust_other_depth(struct kyber_queue_data *kqd,
int read_status, int write_status,
bool have_samples)
{
unsigned int orig_depth, depth;
int status;
orig_depth = depth = kqd->domain_tokens[KYBER_OTHER].sb.depth;
if (read_status == NONE && write_status == NONE) {
depth += 2;
} else if (have_samples) {
if (read_status == NONE)
status = write_status;
else if (write_status == NONE)
status = read_status;
else
status = max(read_status, write_status);
switch (status) {
case GREAT:
depth += 2;
break;
case GOOD:
depth++;
break;
case BAD:
depth -= max(depth / 4, 1U);
break;
case AWFUL:
depth /= 2;
break;
}
}
depth = clamp(depth, 1U, kyber_depth[KYBER_OTHER]);
if (depth != orig_depth)
sbitmap_queue_resize(&kqd->domain_tokens[KYBER_OTHER], depth);
}
/*
* Apply heuristics for limiting queue depths based on gathered latency
* statistics.
*/
static void kyber_stat_timer_fn(struct blk_stat_callback *cb)
{
struct kyber_queue_data *kqd = cb->data;
int read_status, write_status;
read_status = kyber_lat_status(cb, KYBER_READ, kqd->read_lat_nsec);
write_status = kyber_lat_status(cb, KYBER_SYNC_WRITE, kqd->write_lat_nsec);
kyber_adjust_rw_depth(kqd, KYBER_READ, read_status, write_status);
kyber_adjust_rw_depth(kqd, KYBER_SYNC_WRITE, write_status, read_status);
kyber_adjust_other_depth(kqd, read_status, write_status,
cb->stat[KYBER_OTHER].nr_samples != 0);
/*
* Continue monitoring latencies if we aren't hitting the targets or
* we're still throttling other requests.
*/
if (!blk_stat_is_active(kqd->cb) &&
((IS_BAD(read_status) || IS_BAD(write_status) ||
kqd->domain_tokens[KYBER_OTHER].sb.depth < kyber_depth[KYBER_OTHER])))
blk_stat_activate_msecs(kqd->cb, 100);
}
static unsigned int kyber_sched_tags_shift(struct kyber_queue_data *kqd)
{
/*
* All of the hardware queues have the same depth, so we can just grab
* the shift of the first one.
*/
return kqd->q->queue_hw_ctx[0]->sched_tags->bitmap_tags.sb.shift;
}
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
static int kyber_bucket_fn(const struct request *rq)
{
return kyber_sched_domain(rq->cmd_flags);
}
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
static struct kyber_queue_data *kyber_queue_data_alloc(struct request_queue *q)
{
struct kyber_queue_data *kqd;
unsigned int max_tokens;
unsigned int shift;
int ret = -ENOMEM;
int i;
kqd = kmalloc_node(sizeof(*kqd), GFP_KERNEL, q->node);
if (!kqd)
goto err;
kqd->q = q;
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
kqd->cb = blk_stat_alloc_callback(kyber_stat_timer_fn, kyber_bucket_fn,
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
KYBER_NUM_DOMAINS, kqd);
if (!kqd->cb)
goto err_kqd;
/*
* The maximum number of tokens for any scheduling domain is at least
* the queue depth of a single hardware queue. If the hardware doesn't
* have many tags, still provide a reasonable number.
*/
max_tokens = max_t(unsigned int, q->tag_set->queue_depth,
KYBER_MIN_DEPTH);
for (i = 0; i < KYBER_NUM_DOMAINS; i++) {
WARN_ON(!kyber_depth[i]);
WARN_ON(!kyber_batch_size[i]);
ret = sbitmap_queue_init_node(&kqd->domain_tokens[i],
max_tokens, -1, false, GFP_KERNEL,
q->node);
if (ret) {
while (--i >= 0)
sbitmap_queue_free(&kqd->domain_tokens[i]);
goto err_cb;
}
sbitmap_queue_resize(&kqd->domain_tokens[i], kyber_depth[i]);
}
shift = kyber_sched_tags_shift(kqd);
kqd->async_depth = (1U << shift) * KYBER_ASYNC_PERCENT / 100U;
kqd->read_lat_nsec = 2000000ULL;
kqd->write_lat_nsec = 10000000ULL;
return kqd;
err_cb:
blk_stat_free_callback(kqd->cb);
err_kqd:
kfree(kqd);
err:
return ERR_PTR(ret);
}
static int kyber_init_sched(struct request_queue *q, struct elevator_type *e)
{
struct kyber_queue_data *kqd;
struct elevator_queue *eq;
eq = elevator_alloc(q, e);
if (!eq)
return -ENOMEM;
kqd = kyber_queue_data_alloc(q);
if (IS_ERR(kqd)) {
kobject_put(&eq->kobj);
return PTR_ERR(kqd);
}
eq->elevator_data = kqd;
q->elevator = eq;
blk_stat_add_callback(q, kqd->cb);
return 0;
}
static void kyber_exit_sched(struct elevator_queue *e)
{
struct kyber_queue_data *kqd = e->elevator_data;
struct request_queue *q = kqd->q;
int i;
blk_stat_remove_callback(q, kqd->cb);
for (i = 0; i < KYBER_NUM_DOMAINS; i++)
sbitmap_queue_free(&kqd->domain_tokens[i]);
blk_stat_free_callback(kqd->cb);
kfree(kqd);
}
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
static void kyber_ctx_queue_init(struct kyber_ctx_queue *kcq)
{
unsigned int i;
spin_lock_init(&kcq->lock);
for (i = 0; i < KYBER_NUM_DOMAINS; i++)
INIT_LIST_HEAD(&kcq->rq_list[i]);
}
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
static int kyber_init_hctx(struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx)
{
struct kyber_queue_data *kqd = hctx->queue->elevator->elevator_data;
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
struct kyber_hctx_data *khd;
int i;
khd = kmalloc_node(sizeof(*khd), GFP_KERNEL, hctx->numa_node);
if (!khd)
return -ENOMEM;
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
khd->kcqs = kmalloc_array_node(hctx->nr_ctx,
sizeof(struct kyber_ctx_queue),
GFP_KERNEL, hctx->numa_node);
if (!khd->kcqs)
goto err_khd;
for (i = 0; i < hctx->nr_ctx; i++)
kyber_ctx_queue_init(&khd->kcqs[i]);
for (i = 0; i < KYBER_NUM_DOMAINS; i++) {
if (sbitmap_init_node(&khd->kcq_map[i], hctx->nr_ctx,
ilog2(8), GFP_KERNEL, hctx->numa_node)) {
while (--i >= 0)
sbitmap_free(&khd->kcq_map[i]);
goto err_kcqs;
}
}
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
spin_lock_init(&khd->lock);
for (i = 0; i < KYBER_NUM_DOMAINS; i++) {
INIT_LIST_HEAD(&khd->rqs[i]);
init_waitqueue_func_entry(&khd->domain_wait[i],
kyber_domain_wake);
khd->domain_wait[i].private = hctx;
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 18:06:46 +08:00
INIT_LIST_HEAD(&khd->domain_wait[i].entry);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
atomic_set(&khd->wait_index[i], 0);
}
khd->cur_domain = 0;
khd->batching = 0;
hctx->sched_data = khd;
sbitmap_queue_min_shallow_depth(&hctx->sched_tags->bitmap_tags,
kqd->async_depth);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
return 0;
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
err_kcqs:
kfree(khd->kcqs);
err_khd:
kfree(khd);
return -ENOMEM;
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
}
static void kyber_exit_hctx(struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx)
{
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
struct kyber_hctx_data *khd = hctx->sched_data;
int i;
for (i = 0; i < KYBER_NUM_DOMAINS; i++)
sbitmap_free(&khd->kcq_map[i]);
kfree(khd->kcqs);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
kfree(hctx->sched_data);
}
static int rq_get_domain_token(struct request *rq)
{
return (long)rq->elv.priv[0];
}
static void rq_set_domain_token(struct request *rq, int token)
{
rq->elv.priv[0] = (void *)(long)token;
}
static void rq_clear_domain_token(struct kyber_queue_data *kqd,
struct request *rq)
{
unsigned int sched_domain;
int nr;
nr = rq_get_domain_token(rq);
if (nr != -1) {
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
sched_domain = kyber_sched_domain(rq->cmd_flags);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
sbitmap_queue_clear(&kqd->domain_tokens[sched_domain], nr,
rq->mq_ctx->cpu);
}
}
static void kyber_limit_depth(unsigned int op, struct blk_mq_alloc_data *data)
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
{
/*
* We use the scheduler tags as per-hardware queue queueing tokens.
* Async requests can be limited at this stage.
*/
if (!op_is_sync(op)) {
struct kyber_queue_data *kqd = data->q->elevator->elevator_data;
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
data->shallow_depth = kqd->async_depth;
}
}
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
static bool kyber_bio_merge(struct blk_mq_hw_ctx *hctx, struct bio *bio)
{
struct kyber_hctx_data *khd = hctx->sched_data;
struct blk_mq_ctx *ctx = blk_mq_get_ctx(hctx->queue);
struct kyber_ctx_queue *kcq = &khd->kcqs[ctx->index_hw];
unsigned int sched_domain = kyber_sched_domain(bio->bi_opf);
struct list_head *rq_list = &kcq->rq_list[sched_domain];
bool merged;
spin_lock(&kcq->lock);
merged = blk_mq_bio_list_merge(hctx->queue, rq_list, bio);
spin_unlock(&kcq->lock);
blk_mq_put_ctx(ctx);
return merged;
}
static void kyber_prepare_request(struct request *rq, struct bio *bio)
{
rq_set_domain_token(rq, -1);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
}
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
static void kyber_insert_requests(struct blk_mq_hw_ctx *hctx,
struct list_head *rq_list, bool at_head)
{
struct kyber_hctx_data *khd = hctx->sched_data;
struct request *rq, *next;
list_for_each_entry_safe(rq, next, rq_list, queuelist) {
unsigned int sched_domain = kyber_sched_domain(rq->cmd_flags);
struct kyber_ctx_queue *kcq = &khd->kcqs[rq->mq_ctx->index_hw];
struct list_head *head = &kcq->rq_list[sched_domain];
spin_lock(&kcq->lock);
if (at_head)
list_move(&rq->queuelist, head);
else
list_move_tail(&rq->queuelist, head);
sbitmap_set_bit(&khd->kcq_map[sched_domain],
rq->mq_ctx->index_hw);
blk_mq_sched_request_inserted(rq);
spin_unlock(&kcq->lock);
}
}
static void kyber_finish_request(struct request *rq)
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
{
struct kyber_queue_data *kqd = rq->q->elevator->elevator_data;
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
rq_clear_domain_token(kqd, rq);
}
static void kyber_completed_request(struct request *rq)
{
struct request_queue *q = rq->q;
struct kyber_queue_data *kqd = q->elevator->elevator_data;
unsigned int sched_domain;
u64 now, latency, target;
/*
* Check if this request met our latency goal. If not, quickly gather
* some statistics and start throttling.
*/
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
sched_domain = kyber_sched_domain(rq->cmd_flags);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
switch (sched_domain) {
case KYBER_READ:
target = kqd->read_lat_nsec;
break;
case KYBER_SYNC_WRITE:
target = kqd->write_lat_nsec;
break;
default:
return;
}
/* If we are already monitoring latencies, don't check again. */
if (blk_stat_is_active(kqd->cb))
return;
now = ktime_get_ns();
if (now < rq->io_start_time_ns)
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
return;
latency = now - rq->io_start_time_ns;
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
if (latency > target)
blk_stat_activate_msecs(kqd->cb, 10);
}
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
struct flush_kcq_data {
struct kyber_hctx_data *khd;
unsigned int sched_domain;
struct list_head *list;
};
static bool flush_busy_kcq(struct sbitmap *sb, unsigned int bitnr, void *data)
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
{
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
struct flush_kcq_data *flush_data = data;
struct kyber_ctx_queue *kcq = &flush_data->khd->kcqs[bitnr];
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
spin_lock(&kcq->lock);
list_splice_tail_init(&kcq->rq_list[flush_data->sched_domain],
flush_data->list);
sbitmap_clear_bit(sb, bitnr);
spin_unlock(&kcq->lock);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
return true;
}
static void kyber_flush_busy_kcqs(struct kyber_hctx_data *khd,
unsigned int sched_domain,
struct list_head *list)
{
struct flush_kcq_data data = {
.khd = khd,
.sched_domain = sched_domain,
.list = list,
};
sbitmap_for_each_set(&khd->kcq_map[sched_domain],
flush_busy_kcq, &data);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
}
static int kyber_domain_wake(wait_queue_entry_t *wait, unsigned mode, int flags,
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
void *key)
{
struct blk_mq_hw_ctx *hctx = READ_ONCE(wait->private);
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 18:06:46 +08:00
list_del_init(&wait->entry);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
blk_mq_run_hw_queue(hctx, true);
return 1;
}
static int kyber_get_domain_token(struct kyber_queue_data *kqd,
struct kyber_hctx_data *khd,
struct blk_mq_hw_ctx *hctx)
{
unsigned int sched_domain = khd->cur_domain;
struct sbitmap_queue *domain_tokens = &kqd->domain_tokens[sched_domain];
wait_queue_entry_t *wait = &khd->domain_wait[sched_domain];
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
struct sbq_wait_state *ws;
int nr;
nr = __sbitmap_queue_get(domain_tokens);
/*
* If we failed to get a domain token, make sure the hardware queue is
* run when one becomes available. Note that this is serialized on
* khd->lock, but we still need to be careful about the waker.
*/
if (nr < 0 && list_empty_careful(&wait->entry)) {
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
ws = sbq_wait_ptr(domain_tokens,
&khd->wait_index[sched_domain]);
khd->domain_ws[sched_domain] = ws;
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
add_wait_queue(&ws->wait, wait);
/*
* Try again in case a token was freed before we got on the wait
* queue.
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
*/
nr = __sbitmap_queue_get(domain_tokens);
}
/*
* If we got a token while we were on the wait queue, remove ourselves
* from the wait queue to ensure that all wake ups make forward
* progress. It's possible that the waker already deleted the entry
* between the !list_empty_careful() check and us grabbing the lock, but
* list_del_init() is okay with that.
*/
if (nr >= 0 && !list_empty_careful(&wait->entry)) {
ws = khd->domain_ws[sched_domain];
spin_lock_irq(&ws->wait.lock);
list_del_init(&wait->entry);
spin_unlock_irq(&ws->wait.lock);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
}
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
return nr;
}
static struct request *
kyber_dispatch_cur_domain(struct kyber_queue_data *kqd,
struct kyber_hctx_data *khd,
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
struct blk_mq_hw_ctx *hctx)
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
{
struct list_head *rqs;
struct request *rq;
int nr;
rqs = &khd->rqs[khd->cur_domain];
/*
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
* If we already have a flushed request, then we just need to get a
* token for it. Otherwise, if there are pending requests in the kcqs,
* flush the kcqs, but only if we can get a token. If not, we should
* leave the requests in the kcqs so that they can be merged. Note that
* khd->lock serializes the flushes, so if we observed any bit set in
* the kcq_map, we will always get a request.
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
*/
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
rq = list_first_entry_or_null(rqs, struct request, queuelist);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
if (rq) {
nr = kyber_get_domain_token(kqd, khd, hctx);
if (nr >= 0) {
khd->batching++;
rq_set_domain_token(rq, nr);
list_del_init(&rq->queuelist);
return rq;
}
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
} else if (sbitmap_any_bit_set(&khd->kcq_map[khd->cur_domain])) {
nr = kyber_get_domain_token(kqd, khd, hctx);
if (nr >= 0) {
kyber_flush_busy_kcqs(khd, khd->cur_domain, rqs);
rq = list_first_entry(rqs, struct request, queuelist);
khd->batching++;
rq_set_domain_token(rq, nr);
list_del_init(&rq->queuelist);
return rq;
}
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
}
/* There were either no pending requests or no tokens. */
return NULL;
}
static struct request *kyber_dispatch_request(struct blk_mq_hw_ctx *hctx)
{
struct kyber_queue_data *kqd = hctx->queue->elevator->elevator_data;
struct kyber_hctx_data *khd = hctx->sched_data;
struct request *rq;
int i;
spin_lock(&khd->lock);
/*
* First, if we are still entitled to batch, try to dispatch a request
* from the batch.
*/
if (khd->batching < kyber_batch_size[khd->cur_domain]) {
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
rq = kyber_dispatch_cur_domain(kqd, khd, hctx);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
if (rq)
goto out;
}
/*
* Either,
* 1. We were no longer entitled to a batch.
* 2. The domain we were batching didn't have any requests.
* 3. The domain we were batching was out of tokens.
*
* Start another batch. Note that this wraps back around to the original
* domain if no other domains have requests or tokens.
*/
khd->batching = 0;
for (i = 0; i < KYBER_NUM_DOMAINS; i++) {
if (khd->cur_domain == KYBER_NUM_DOMAINS - 1)
khd->cur_domain = 0;
else
khd->cur_domain++;
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
rq = kyber_dispatch_cur_domain(kqd, khd, hctx);
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
if (rq)
goto out;
}
rq = NULL;
out:
spin_unlock(&khd->lock);
return rq;
}
static bool kyber_has_work(struct blk_mq_hw_ctx *hctx)
{
struct kyber_hctx_data *khd = hctx->sched_data;
int i;
for (i = 0; i < KYBER_NUM_DOMAINS; i++) {
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
if (!list_empty_careful(&khd->rqs[i]) ||
sbitmap_any_bit_set(&khd->kcq_map[i]))
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
return true;
}
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
return false;
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
}
#define KYBER_LAT_SHOW_STORE(op) \
static ssize_t kyber_##op##_lat_show(struct elevator_queue *e, \
char *page) \
{ \
struct kyber_queue_data *kqd = e->elevator_data; \
\
return sprintf(page, "%llu\n", kqd->op##_lat_nsec); \
} \
\
static ssize_t kyber_##op##_lat_store(struct elevator_queue *e, \
const char *page, size_t count) \
{ \
struct kyber_queue_data *kqd = e->elevator_data; \
unsigned long long nsec; \
int ret; \
\
ret = kstrtoull(page, 10, &nsec); \
if (ret) \
return ret; \
\
kqd->op##_lat_nsec = nsec; \
\
return count; \
}
KYBER_LAT_SHOW_STORE(read);
KYBER_LAT_SHOW_STORE(write);
#undef KYBER_LAT_SHOW_STORE
#define KYBER_LAT_ATTR(op) __ATTR(op##_lat_nsec, 0644, kyber_##op##_lat_show, kyber_##op##_lat_store)
static struct elv_fs_entry kyber_sched_attrs[] = {
KYBER_LAT_ATTR(read),
KYBER_LAT_ATTR(write),
__ATTR_NULL
};
#undef KYBER_LAT_ATTR
#ifdef CONFIG_BLK_DEBUG_FS
#define KYBER_DEBUGFS_DOMAIN_ATTRS(domain, name) \
static int kyber_##name##_tokens_show(void *data, struct seq_file *m) \
{ \
struct request_queue *q = data; \
struct kyber_queue_data *kqd = q->elevator->elevator_data; \
\
sbitmap_queue_show(&kqd->domain_tokens[domain], m); \
return 0; \
} \
\
static void *kyber_##name##_rqs_start(struct seq_file *m, loff_t *pos) \
__acquires(&khd->lock) \
{ \
struct blk_mq_hw_ctx *hctx = m->private; \
struct kyber_hctx_data *khd = hctx->sched_data; \
\
spin_lock(&khd->lock); \
return seq_list_start(&khd->rqs[domain], *pos); \
} \
\
static void *kyber_##name##_rqs_next(struct seq_file *m, void *v, \
loff_t *pos) \
{ \
struct blk_mq_hw_ctx *hctx = m->private; \
struct kyber_hctx_data *khd = hctx->sched_data; \
\
return seq_list_next(v, &khd->rqs[domain], pos); \
} \
\
static void kyber_##name##_rqs_stop(struct seq_file *m, void *v) \
__releases(&khd->lock) \
{ \
struct blk_mq_hw_ctx *hctx = m->private; \
struct kyber_hctx_data *khd = hctx->sched_data; \
\
spin_unlock(&khd->lock); \
} \
\
static const struct seq_operations kyber_##name##_rqs_seq_ops = { \
.start = kyber_##name##_rqs_start, \
.next = kyber_##name##_rqs_next, \
.stop = kyber_##name##_rqs_stop, \
.show = blk_mq_debugfs_rq_show, \
}; \
\
static int kyber_##name##_waiting_show(void *data, struct seq_file *m) \
{ \
struct blk_mq_hw_ctx *hctx = data; \
struct kyber_hctx_data *khd = hctx->sched_data; \
wait_queue_entry_t *wait = &khd->domain_wait[domain]; \
\
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 18:06:46 +08:00
seq_printf(m, "%d\n", !list_empty_careful(&wait->entry)); \
return 0; \
}
KYBER_DEBUGFS_DOMAIN_ATTRS(KYBER_READ, read)
KYBER_DEBUGFS_DOMAIN_ATTRS(KYBER_SYNC_WRITE, sync_write)
KYBER_DEBUGFS_DOMAIN_ATTRS(KYBER_OTHER, other)
#undef KYBER_DEBUGFS_DOMAIN_ATTRS
static int kyber_async_depth_show(void *data, struct seq_file *m)
{
struct request_queue *q = data;
struct kyber_queue_data *kqd = q->elevator->elevator_data;
seq_printf(m, "%u\n", kqd->async_depth);
return 0;
}
static int kyber_cur_domain_show(void *data, struct seq_file *m)
{
struct blk_mq_hw_ctx *hctx = data;
struct kyber_hctx_data *khd = hctx->sched_data;
switch (khd->cur_domain) {
case KYBER_READ:
seq_puts(m, "READ\n");
break;
case KYBER_SYNC_WRITE:
seq_puts(m, "SYNC_WRITE\n");
break;
case KYBER_OTHER:
seq_puts(m, "OTHER\n");
break;
default:
seq_printf(m, "%u\n", khd->cur_domain);
break;
}
return 0;
}
static int kyber_batching_show(void *data, struct seq_file *m)
{
struct blk_mq_hw_ctx *hctx = data;
struct kyber_hctx_data *khd = hctx->sched_data;
seq_printf(m, "%u\n", khd->batching);
return 0;
}
#define KYBER_QUEUE_DOMAIN_ATTRS(name) \
{#name "_tokens", 0400, kyber_##name##_tokens_show}
static const struct blk_mq_debugfs_attr kyber_queue_debugfs_attrs[] = {
KYBER_QUEUE_DOMAIN_ATTRS(read),
KYBER_QUEUE_DOMAIN_ATTRS(sync_write),
KYBER_QUEUE_DOMAIN_ATTRS(other),
{"async_depth", 0400, kyber_async_depth_show},
{},
};
#undef KYBER_QUEUE_DOMAIN_ATTRS
#define KYBER_HCTX_DOMAIN_ATTRS(name) \
{#name "_rqs", 0400, .seq_ops = &kyber_##name##_rqs_seq_ops}, \
{#name "_waiting", 0400, kyber_##name##_waiting_show}
static const struct blk_mq_debugfs_attr kyber_hctx_debugfs_attrs[] = {
KYBER_HCTX_DOMAIN_ATTRS(read),
KYBER_HCTX_DOMAIN_ATTRS(sync_write),
KYBER_HCTX_DOMAIN_ATTRS(other),
{"cur_domain", 0400, kyber_cur_domain_show},
{"batching", 0400, kyber_batching_show},
{},
};
#undef KYBER_HCTX_DOMAIN_ATTRS
#endif
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
static struct elevator_type kyber_sched = {
.ops.mq = {
.init_sched = kyber_init_sched,
.exit_sched = kyber_exit_sched,
.init_hctx = kyber_init_hctx,
.exit_hctx = kyber_exit_hctx,
.limit_depth = kyber_limit_depth,
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
.bio_merge = kyber_bio_merge,
.prepare_request = kyber_prepare_request,
block: kyber: make kyber more friendly with merging Currently, kyber is very unfriendly with merging. kyber depends on ctx rq_list to do merging, however, most of time, it will not leave any requests in ctx rq_list. This is because even if tokens of one domain is used up, kyber will try to dispatch requests from other domain and flush the rq_list there. To improve this, we setup kyber_ctx_queue (kcq) which is similar with ctx, but it has rq_lists for different domain and build same mapping between kcq and khd as the ctx & hctx. Then we could merge, insert and dispatch for different domains separately. At the same time, only flush the rq_list of kcq when get domain token successfully. Then if one domain token is used up, the requests could be left in the rq_list of that domain and maybe merged with following io. Following is my test result on machine with 8 cores and NVMe card INTEL SSDPEKKR128G7 fio size=256m ioengine=libaio iodepth=64 direct=1 numjobs=8 seq/random +------+---------------------------------------------------------------+ |patch?| bw(MB/s) | iops | slat(usec) | clat(usec) | merge | +----------------------------------------------------------------------+ | w/o | 606/612 | 151k/153k | 6.89/7.03 | 3349.21/3305.40 | 0/0 | +----------------------------------------------------------------------+ | w/ | 1083/616 | 277k/154k | 4.93/6.95 | 1830.62/3279.95 | 223k/3k | +----------------------------------------------------------------------+ When set numjobs to 16, the bw and iops could reach 1662MB/s and 425k on my platform. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31 00:47:40 +08:00
.insert_requests = kyber_insert_requests,
.finish_request = kyber_finish_request,
.requeue_request = kyber_finish_request,
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
.completed_request = kyber_completed_request,
.dispatch_request = kyber_dispatch_request,
.has_work = kyber_has_work,
},
.uses_mq = true,
#ifdef CONFIG_BLK_DEBUG_FS
.queue_debugfs_attrs = kyber_queue_debugfs_attrs,
.hctx_debugfs_attrs = kyber_hctx_debugfs_attrs,
#endif
blk-mq: introduce Kyber multiqueue I/O scheduler The Kyber I/O scheduler is an I/O scheduler for fast devices designed to scale to multiple queues. Users configure only two knobs, the target read and synchronous write latencies, and the scheduler tunes itself to achieve that latency goal. The implementation is based on "tokens", built on top of the scalable bitmap library. Tokens serve as a mechanism for limiting requests. There are two tiers of tokens: queueing tokens and dispatch tokens. A queueing token is required to allocate a request. In fact, these tokens are actually the blk-mq internal scheduler tags, but the scheduler manages the allocation directly in order to implement its policy. Dispatch tokens are device-wide and split up into two scheduling domains: reads vs. writes. Each hardware queue dispatches batches round-robin between the scheduling domains as long as tokens are available for that domain. These tokens can be used as the mechanism to enable various policies. The policy Kyber uses is inspired by active queue management techniques for network routing, similar to blk-wbt. The scheduler monitors latencies and scales the number of dispatch tokens accordingly. Queueing tokens are used to prevent starvation of synchronous requests by asynchronous requests. Various extensions are possible, including better heuristics and ionice support. The new scheduler isn't set as the default yet. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 16:00:02 +08:00
.elevator_attrs = kyber_sched_attrs,
.elevator_name = "kyber",
.elevator_owner = THIS_MODULE,
};
static int __init kyber_init(void)
{
return elv_register(&kyber_sched);
}
static void __exit kyber_exit(void)
{
elv_unregister(&kyber_sched);
}
module_init(kyber_init);
module_exit(kyber_exit);
MODULE_AUTHOR("Omar Sandoval");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Kyber I/O scheduler");