linux_old1/drivers/rtc/rtc-s5m.c

900 lines
22 KiB
C
Raw Normal View History

/*
* Copyright (c) 2013-2014 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* Copyright (C) 2013 Google, Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/bcd.h>
#include <linux/regmap.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/irq.h>
#include <linux/mfd/samsung/rtc.h>
#include <linux/mfd/samsung/s2mps14.h>
/*
* Maximum number of retries for checking changes in UDR field
* of S5M_RTC_UDR_CON register (to limit possible endless loop).
*
* After writing to RTC registers (setting time or alarm) read the UDR field
* in S5M_RTC_UDR_CON register. UDR is auto-cleared when data have
* been transferred.
*/
#define UDR_READ_RETRY_CNT 5
/*
* Registers used by the driver which are different between chipsets.
*
* Operations like read time and write alarm/time require updating
* specific fields in UDR register. These fields usually are auto-cleared
* (with some exceptions).
*
* Table of operations per device:
*
* Device | Write time | Read time | Write alarm
* =================================================
* S5M8767 | UDR + TIME | | UDR
* S2MPS11/14 | WUDR | RUDR | WUDR + RUDR
* S2MPS13 | WUDR | RUDR | WUDR + AUDR
* S2MPS15 | WUDR | RUDR | AUDR
*/
struct s5m_rtc_reg_config {
/* Number of registers used for setting time/alarm0/alarm1 */
unsigned int regs_count;
/* First register for time, seconds */
unsigned int time;
/* RTC control register */
unsigned int ctrl;
/* First register for alarm 0, seconds */
unsigned int alarm0;
/* First register for alarm 1, seconds */
unsigned int alarm1;
/*
* Register for update flag (UDR). Typically setting UDR field to 1
* will enable update of time or alarm register. Then it will be
* auto-cleared after successful update.
*/
unsigned int udr_update;
/* Auto-cleared mask in UDR field for writing time and alarm */
unsigned int autoclear_udr_mask;
/*
* Masks in UDR field for time and alarm operations.
* The read time mask can be 0. Rest should not.
*/
unsigned int read_time_udr_mask;
unsigned int write_time_udr_mask;
unsigned int write_alarm_udr_mask;
};
/* Register map for S5M8763 and S5M8767 */
static const struct s5m_rtc_reg_config s5m_rtc_regs = {
.regs_count = 8,
.time = S5M_RTC_SEC,
.ctrl = S5M_ALARM1_CONF,
.alarm0 = S5M_ALARM0_SEC,
.alarm1 = S5M_ALARM1_SEC,
.udr_update = S5M_RTC_UDR_CON,
.autoclear_udr_mask = S5M_RTC_UDR_MASK,
.read_time_udr_mask = 0, /* Not needed */
.write_time_udr_mask = S5M_RTC_UDR_MASK | S5M_RTC_TIME_EN_MASK,
.write_alarm_udr_mask = S5M_RTC_UDR_MASK,
};
/* Register map for S2MPS13 */
static const struct s5m_rtc_reg_config s2mps13_rtc_regs = {
.regs_count = 7,
.time = S2MPS_RTC_SEC,
.ctrl = S2MPS_RTC_CTRL,
.alarm0 = S2MPS_ALARM0_SEC,
.alarm1 = S2MPS_ALARM1_SEC,
.udr_update = S2MPS_RTC_UDR_CON,
.autoclear_udr_mask = S2MPS_RTC_WUDR_MASK,
.read_time_udr_mask = S2MPS_RTC_RUDR_MASK,
.write_time_udr_mask = S2MPS_RTC_WUDR_MASK,
.write_alarm_udr_mask = S2MPS_RTC_WUDR_MASK | S2MPS13_RTC_AUDR_MASK,
};
/* Register map for S2MPS11/14 */
static const struct s5m_rtc_reg_config s2mps14_rtc_regs = {
.regs_count = 7,
.time = S2MPS_RTC_SEC,
.ctrl = S2MPS_RTC_CTRL,
.alarm0 = S2MPS_ALARM0_SEC,
.alarm1 = S2MPS_ALARM1_SEC,
.udr_update = S2MPS_RTC_UDR_CON,
.autoclear_udr_mask = S2MPS_RTC_WUDR_MASK,
.read_time_udr_mask = S2MPS_RTC_RUDR_MASK,
.write_time_udr_mask = S2MPS_RTC_WUDR_MASK,
.write_alarm_udr_mask = S2MPS_RTC_WUDR_MASK | S2MPS_RTC_RUDR_MASK,
};
/*
* Register map for S2MPS15 - in comparison to S2MPS14 the WUDR and AUDR bits
* are swapped.
*/
static const struct s5m_rtc_reg_config s2mps15_rtc_regs = {
.regs_count = 7,
.time = S2MPS_RTC_SEC,
.ctrl = S2MPS_RTC_CTRL,
.alarm0 = S2MPS_ALARM0_SEC,
.alarm1 = S2MPS_ALARM1_SEC,
.udr_update = S2MPS_RTC_UDR_CON,
.autoclear_udr_mask = S2MPS_RTC_WUDR_MASK,
.read_time_udr_mask = S2MPS_RTC_RUDR_MASK,
.write_time_udr_mask = S2MPS15_RTC_WUDR_MASK,
.write_alarm_udr_mask = S2MPS15_RTC_AUDR_MASK,
};
struct s5m_rtc_info {
struct device *dev;
struct i2c_client *i2c;
struct sec_pmic_dev *s5m87xx;
struct regmap *regmap;
struct rtc_device *rtc_dev;
int irq;
enum sec_device_type device_type;
int rtc_24hr_mode;
const struct s5m_rtc_reg_config *regs;
};
static const struct regmap_config s5m_rtc_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = S5M_RTC_REG_MAX,
};
static const struct regmap_config s2mps14_rtc_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = S2MPS_RTC_REG_MAX,
};
static void s5m8767_data_to_tm(u8 *data, struct rtc_time *tm,
int rtc_24hr_mode)
{
tm->tm_sec = data[RTC_SEC] & 0x7f;
tm->tm_min = data[RTC_MIN] & 0x7f;
if (rtc_24hr_mode) {
tm->tm_hour = data[RTC_HOUR] & 0x1f;
} else {
tm->tm_hour = data[RTC_HOUR] & 0x0f;
if (data[RTC_HOUR] & HOUR_PM_MASK)
tm->tm_hour += 12;
}
tm->tm_wday = ffs(data[RTC_WEEKDAY] & 0x7f);
tm->tm_mday = data[RTC_DATE] & 0x1f;
tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1;
tm->tm_year = (data[RTC_YEAR1] & 0x7f) + 100;
tm->tm_yday = 0;
tm->tm_isdst = 0;
}
static int s5m8767_tm_to_data(struct rtc_time *tm, u8 *data)
{
data[RTC_SEC] = tm->tm_sec;
data[RTC_MIN] = tm->tm_min;
if (tm->tm_hour >= 12)
data[RTC_HOUR] = tm->tm_hour | HOUR_PM_MASK;
else
data[RTC_HOUR] = tm->tm_hour & ~HOUR_PM_MASK;
data[RTC_WEEKDAY] = 1 << tm->tm_wday;
data[RTC_DATE] = tm->tm_mday;
data[RTC_MONTH] = tm->tm_mon + 1;
data[RTC_YEAR1] = tm->tm_year > 100 ? (tm->tm_year - 100) : 0;
if (tm->tm_year < 100) {
pr_err("RTC cannot handle the year %d\n",
1900 + tm->tm_year);
return -EINVAL;
} else {
return 0;
}
}
/*
* Read RTC_UDR_CON register and wait till UDR field is cleared.
* This indicates that time/alarm update ended.
*/
static int s5m8767_wait_for_udr_update(struct s5m_rtc_info *info)
{
int ret, retry = UDR_READ_RETRY_CNT;
unsigned int data;
do {
ret = regmap_read(info->regmap, info->regs->udr_update, &data);
} while (--retry && (data & info->regs->autoclear_udr_mask) && !ret);
if (!retry)
dev_err(info->dev, "waiting for UDR update, reached max number of retries\n");
return ret;
}
static int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
struct rtc_wkalrm *alarm)
{
int ret;
unsigned int val;
switch (info->device_type) {
case S5M8767X:
case S5M8763X:
ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
val &= S5M_ALARM0_STATUS;
break;
case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
ret = regmap_read(info->s5m87xx->regmap_pmic, S2MPS14_REG_ST2,
&val);
val &= S2MPS_ALARM0_STATUS;
break;
default:
return -EINVAL;
}
if (ret < 0)
return ret;
if (val)
alarm->pending = 1;
else
alarm->pending = 0;
return 0;
}
static int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
{
int ret;
unsigned int data;
ret = regmap_read(info->regmap, info->regs->udr_update, &data);
if (ret < 0) {
dev_err(info->dev, "failed to read update reg(%d)\n", ret);
return ret;
}
data |= info->regs->write_time_udr_mask;
ret = regmap_write(info->regmap, info->regs->udr_update, data);
if (ret < 0) {
dev_err(info->dev, "failed to write update reg(%d)\n", ret);
return ret;
}
ret = s5m8767_wait_for_udr_update(info);
return ret;
}
static int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
{
int ret;
unsigned int data;
ret = regmap_read(info->regmap, info->regs->udr_update, &data);
if (ret < 0) {
dev_err(info->dev, "%s: fail to read update reg(%d)\n",
__func__, ret);
return ret;
}
data |= info->regs->write_alarm_udr_mask;
switch (info->device_type) {
case S5M8763X:
case S5M8767X:
data &= ~S5M_RTC_TIME_EN_MASK;
break;
case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
/* No exceptions needed */
break;
default:
return -EINVAL;
}
ret = regmap_write(info->regmap, info->regs->udr_update, data);
if (ret < 0) {
dev_err(info->dev, "%s: fail to write update reg(%d)\n",
__func__, ret);
return ret;
}
ret = s5m8767_wait_for_udr_update(info);
/* On S2MPS13 the AUDR is not auto-cleared */
if (info->device_type == S2MPS13X)
regmap_update_bits(info->regmap, info->regs->udr_update,
S2MPS13_RTC_AUDR_MASK, 0);
return ret;
}
static void s5m8763_data_to_tm(u8 *data, struct rtc_time *tm)
{
tm->tm_sec = bcd2bin(data[RTC_SEC]);
tm->tm_min = bcd2bin(data[RTC_MIN]);
if (data[RTC_HOUR] & HOUR_12) {
tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x1f);
if (data[RTC_HOUR] & HOUR_PM)
tm->tm_hour += 12;
} else {
tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x3f);
}
tm->tm_wday = data[RTC_WEEKDAY] & 0x07;
tm->tm_mday = bcd2bin(data[RTC_DATE]);
tm->tm_mon = bcd2bin(data[RTC_MONTH]);
tm->tm_year = bcd2bin(data[RTC_YEAR1]) + bcd2bin(data[RTC_YEAR2]) * 100;
tm->tm_year -= 1900;
}
static void s5m8763_tm_to_data(struct rtc_time *tm, u8 *data)
{
data[RTC_SEC] = bin2bcd(tm->tm_sec);
data[RTC_MIN] = bin2bcd(tm->tm_min);
data[RTC_HOUR] = bin2bcd(tm->tm_hour);
data[RTC_WEEKDAY] = tm->tm_wday;
data[RTC_DATE] = bin2bcd(tm->tm_mday);
data[RTC_MONTH] = bin2bcd(tm->tm_mon);
data[RTC_YEAR1] = bin2bcd(tm->tm_year % 100);
data[RTC_YEAR2] = bin2bcd((tm->tm_year + 1900) / 100);
}
static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct s5m_rtc_info *info = dev_get_drvdata(dev);
u8 data[info->regs->regs_count];
int ret;
if (info->regs->read_time_udr_mask) {
ret = regmap_update_bits(info->regmap,
info->regs->udr_update,
info->regs->read_time_udr_mask,
info->regs->read_time_udr_mask);
if (ret) {
dev_err(dev,
"Failed to prepare registers for time reading: %d\n",
ret);
return ret;
}
}
ret = regmap_bulk_read(info->regmap, info->regs->time, data,
info->regs->regs_count);
if (ret < 0)
return ret;
switch (info->device_type) {
case S5M8763X:
s5m8763_data_to_tm(data, tm);
break;
case S5M8767X:
case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_data_to_tm(data, tm, info->rtc_24hr_mode);
break;
default:
return -EINVAL;
}
dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
1900 + tm->tm_year, 1 + tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec, tm->tm_wday);
return rtc_valid_tm(tm);
}
static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct s5m_rtc_info *info = dev_get_drvdata(dev);
u8 data[info->regs->regs_count];
int ret = 0;
switch (info->device_type) {
case S5M8763X:
s5m8763_tm_to_data(tm, data);
break;
case S5M8767X:
case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
ret = s5m8767_tm_to_data(tm, data);
break;
default:
return -EINVAL;
}
if (ret < 0)
return ret;
dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
1900 + tm->tm_year, 1 + tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec, tm->tm_wday);
ret = regmap_raw_write(info->regmap, info->regs->time, data,
info->regs->regs_count);
if (ret < 0)
return ret;
ret = s5m8767_rtc_set_time_reg(info);
return ret;
}
static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct s5m_rtc_info *info = dev_get_drvdata(dev);
u8 data[info->regs->regs_count];
unsigned int val;
int ret, i;
ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data,
info->regs->regs_count);
if (ret < 0)
return ret;
switch (info->device_type) {
case S5M8763X:
s5m8763_data_to_tm(data, &alrm->time);
ret = regmap_read(info->regmap, S5M_ALARM0_CONF, &val);
if (ret < 0)
return ret;
alrm->enabled = !!val;
break;
case S5M8767X:
case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
alrm->enabled = 0;
for (i = 0; i < info->regs->regs_count; i++) {
if (data[i] & ALARM_ENABLE_MASK) {
alrm->enabled = 1;
break;
}
}
break;
default:
return -EINVAL;
}
dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
1900 + alrm->time.tm_year, 1 + alrm->time.tm_mon,
alrm->time.tm_mday, alrm->time.tm_hour,
alrm->time.tm_min, alrm->time.tm_sec,
alrm->time.tm_wday);
ret = s5m_check_peding_alarm_interrupt(info, alrm);
return 0;
}
static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
{
u8 data[info->regs->regs_count];
int ret, i;
struct rtc_time tm;
ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data,
info->regs->regs_count);
if (ret < 0)
return ret;
s5m8767_data_to_tm(data, &tm, info->rtc_24hr_mode);
dev_dbg(info->dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
1900 + tm.tm_year, 1 + tm.tm_mon, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_wday);
switch (info->device_type) {
case S5M8763X:
ret = regmap_write(info->regmap, S5M_ALARM0_CONF, 0);
break;
case S5M8767X:
case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
for (i = 0; i < info->regs->regs_count; i++)
data[i] &= ~ALARM_ENABLE_MASK;
ret = regmap_raw_write(info->regmap, info->regs->alarm0, data,
info->regs->regs_count);
if (ret < 0)
return ret;
ret = s5m8767_rtc_set_alarm_reg(info);
break;
default:
return -EINVAL;
}
return ret;
}
static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
{
int ret;
u8 data[info->regs->regs_count];
u8 alarm0_conf;
struct rtc_time tm;
ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data,
info->regs->regs_count);
if (ret < 0)
return ret;
s5m8767_data_to_tm(data, &tm, info->rtc_24hr_mode);
dev_dbg(info->dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
1900 + tm.tm_year, 1 + tm.tm_mon, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_wday);
switch (info->device_type) {
case S5M8763X:
alarm0_conf = 0x77;
ret = regmap_write(info->regmap, S5M_ALARM0_CONF, alarm0_conf);
break;
case S5M8767X:
case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
data[RTC_SEC] |= ALARM_ENABLE_MASK;
data[RTC_MIN] |= ALARM_ENABLE_MASK;
data[RTC_HOUR] |= ALARM_ENABLE_MASK;
data[RTC_WEEKDAY] &= ~ALARM_ENABLE_MASK;
if (data[RTC_DATE] & 0x1f)
data[RTC_DATE] |= ALARM_ENABLE_MASK;
if (data[RTC_MONTH] & 0xf)
data[RTC_MONTH] |= ALARM_ENABLE_MASK;
if (data[RTC_YEAR1] & 0x7f)
data[RTC_YEAR1] |= ALARM_ENABLE_MASK;
ret = regmap_raw_write(info->regmap, info->regs->alarm0, data,
info->regs->regs_count);
if (ret < 0)
return ret;
ret = s5m8767_rtc_set_alarm_reg(info);
break;
default:
return -EINVAL;
}
return ret;
}
static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct s5m_rtc_info *info = dev_get_drvdata(dev);
u8 data[info->regs->regs_count];
int ret;
switch (info->device_type) {
case S5M8763X:
s5m8763_tm_to_data(&alrm->time, data);
break;
case S5M8767X:
case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_tm_to_data(&alrm->time, data);
break;
default:
return -EINVAL;
}
dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__,
1900 + alrm->time.tm_year, 1 + alrm->time.tm_mon,
alrm->time.tm_mday, alrm->time.tm_hour, alrm->time.tm_min,
alrm->time.tm_sec, alrm->time.tm_wday);
ret = s5m_rtc_stop_alarm(info);
if (ret < 0)
return ret;
ret = regmap_raw_write(info->regmap, info->regs->alarm0, data,
info->regs->regs_count);
if (ret < 0)
return ret;
ret = s5m8767_rtc_set_alarm_reg(info);
if (ret < 0)
return ret;
if (alrm->enabled)
ret = s5m_rtc_start_alarm(info);
return ret;
}
static int s5m_rtc_alarm_irq_enable(struct device *dev,
unsigned int enabled)
{
struct s5m_rtc_info *info = dev_get_drvdata(dev);
if (enabled)
return s5m_rtc_start_alarm(info);
else
return s5m_rtc_stop_alarm(info);
}
static irqreturn_t s5m_rtc_alarm_irq(int irq, void *data)
{
struct s5m_rtc_info *info = data;
rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF);
return IRQ_HANDLED;
}
static const struct rtc_class_ops s5m_rtc_ops = {
.read_time = s5m_rtc_read_time,
.set_time = s5m_rtc_set_time,
.read_alarm = s5m_rtc_read_alarm,
.set_alarm = s5m_rtc_set_alarm,
.alarm_irq_enable = s5m_rtc_alarm_irq_enable,
};
static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
{
u8 data[2];
int ret;
switch (info->device_type) {
case S5M8763X:
case S5M8767X:
/* UDR update time. Default of 7.32 ms is too long. */
ret = regmap_update_bits(info->regmap, S5M_RTC_UDR_CON,
S5M_RTC_UDR_T_MASK, S5M_RTC_UDR_T_450_US);
if (ret < 0)
dev_err(info->dev, "%s: fail to change UDR time: %d\n",
__func__, ret);
/* Set RTC control register : Binary mode, 24hour mode */
data[0] = (1 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2);
break;
case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
ret = regmap_write(info->regmap, info->regs->ctrl, data[0]);
if (ret < 0)
break;
/*
* Should set WUDR & (RUDR or AUDR) bits to high after writing
* RTC_CTRL register like writing Alarm registers. We can't find
* the description from datasheet but vendor code does that
* really.
*/
ret = s5m8767_rtc_set_alarm_reg(info);
break;
default:
return -EINVAL;
}
info->rtc_24hr_mode = 1;
if (ret < 0) {
dev_err(info->dev, "%s: fail to write controlm reg(%d)\n",
__func__, ret);
return ret;
}
return ret;
}
static int s5m_rtc_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *s5m87xx = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = s5m87xx->pdata;
struct s5m_rtc_info *info;
const struct regmap_config *regmap_cfg;
int ret, alarm_irq;
if (!pdata) {
dev_err(pdev->dev.parent, "Platform data not supplied\n");
return -ENODEV;
}
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
switch (platform_get_device_id(pdev)->driver_data) {
case S2MPS15X:
regmap_cfg = &s2mps14_rtc_regmap_config;
info->regs = &s2mps15_rtc_regs;
alarm_irq = S2MPS14_IRQ_RTCA0;
break;
case S2MPS14X:
regmap_cfg = &s2mps14_rtc_regmap_config;
info->regs = &s2mps14_rtc_regs;
alarm_irq = S2MPS14_IRQ_RTCA0;
break;
case S2MPS13X:
regmap_cfg = &s2mps14_rtc_regmap_config;
info->regs = &s2mps13_rtc_regs;
alarm_irq = S2MPS14_IRQ_RTCA0;
break;
case S5M8763X:
regmap_cfg = &s5m_rtc_regmap_config;
info->regs = &s5m_rtc_regs;
alarm_irq = S5M8763_IRQ_ALARM0;
break;
case S5M8767X:
regmap_cfg = &s5m_rtc_regmap_config;
info->regs = &s5m_rtc_regs;
alarm_irq = S5M8767_IRQ_RTCA1;
break;
default:
dev_err(&pdev->dev,
"Device type %lu is not supported by RTC driver\n",
platform_get_device_id(pdev)->driver_data);
return -ENODEV;
}
info->i2c = i2c_new_dummy(s5m87xx->i2c->adapter, RTC_I2C_ADDR);
if (!info->i2c) {
dev_err(&pdev->dev, "Failed to allocate I2C for RTC\n");
return -ENODEV;
}
info->regmap = devm_regmap_init_i2c(info->i2c, regmap_cfg);
if (IS_ERR(info->regmap)) {
ret = PTR_ERR(info->regmap);
dev_err(&pdev->dev, "Failed to allocate RTC register map: %d\n",
ret);
goto err;
}
info->dev = &pdev->dev;
info->s5m87xx = s5m87xx;
info->device_type = platform_get_device_id(pdev)->driver_data;
drivers/rtc/rtc-s5m.c: re-add support for devices without irq specified The rtc-s5m driver used to support devices without irq specified in the past. Re-add this support. The patch fixes boot for Insignal's Exynos4412 based Origen board. Error messages before the patch: ... Unable to handle kernel NULL pointer dereference at virtual address 00000094 pgd = c0004000 [00000094] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-next-20140804-00008-ga59480f-dirty #701 task: ea80f000 ti: ea882000 task.ti: ea882000 PC is at regmap_irq_get_virq+0x0/0x28 LR is at s5m_rtc_probe+0xdc/0x310 pc : [<c02574fc>] lr : [<c02de75c>] psr: 80000153 sp : ea883e48 ip : 00000000 fp : 00000000 r10: 0000000c r9 : c05de7ac r8 : eaabc600 r7 : eaa6b4d0 r6 : c0439e8c r5 : eaabc610 r4 : eab30e50 r3 : 00000000 r2 : 00000000 r1 : 0000000c r0 : 00000000 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xea882240) Backtrace: regmap_irq_get_virq s5m_rtc_probe platform_drv_probe driver_probe_device __driver_attach bus_for_each_dev bus_add_driver driver_register do_one_initcall kernel_init_freeable kernel_init ---[ end trace a954d7f019122700 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-30 06:18:53 +08:00
if (s5m87xx->irq_data) {
info->irq = regmap_irq_get_virq(s5m87xx->irq_data, alarm_irq);
if (info->irq <= 0) {
ret = -EINVAL;
dev_err(&pdev->dev, "Failed to get virtual IRQ %d\n",
alarm_irq);
drivers/rtc/rtc-s5m.c: re-add support for devices without irq specified The rtc-s5m driver used to support devices without irq specified in the past. Re-add this support. The patch fixes boot for Insignal's Exynos4412 based Origen board. Error messages before the patch: ... Unable to handle kernel NULL pointer dereference at virtual address 00000094 pgd = c0004000 [00000094] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-next-20140804-00008-ga59480f-dirty #701 task: ea80f000 ti: ea882000 task.ti: ea882000 PC is at regmap_irq_get_virq+0x0/0x28 LR is at s5m_rtc_probe+0xdc/0x310 pc : [<c02574fc>] lr : [<c02de75c>] psr: 80000153 sp : ea883e48 ip : 00000000 fp : 00000000 r10: 0000000c r9 : c05de7ac r8 : eaabc600 r7 : eaa6b4d0 r6 : c0439e8c r5 : eaabc610 r4 : eab30e50 r3 : 00000000 r2 : 00000000 r1 : 0000000c r0 : 00000000 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xea882240) Backtrace: regmap_irq_get_virq s5m_rtc_probe platform_drv_probe driver_probe_device __driver_attach bus_for_each_dev bus_add_driver driver_register do_one_initcall kernel_init_freeable kernel_init ---[ end trace a954d7f019122700 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-30 06:18:53 +08:00
goto err;
}
}
platform_set_drvdata(pdev, info);
ret = s5m8767_rtc_init_reg(info);
device_init_wakeup(&pdev->dev, 1);
info->rtc_dev = devm_rtc_device_register(&pdev->dev, "s5m-rtc",
&s5m_rtc_ops, THIS_MODULE);
if (IS_ERR(info->rtc_dev)) {
ret = PTR_ERR(info->rtc_dev);
goto err;
}
drivers/rtc/rtc-s5m.c: re-add support for devices without irq specified The rtc-s5m driver used to support devices without irq specified in the past. Re-add this support. The patch fixes boot for Insignal's Exynos4412 based Origen board. Error messages before the patch: ... Unable to handle kernel NULL pointer dereference at virtual address 00000094 pgd = c0004000 [00000094] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-next-20140804-00008-ga59480f-dirty #701 task: ea80f000 ti: ea882000 task.ti: ea882000 PC is at regmap_irq_get_virq+0x0/0x28 LR is at s5m_rtc_probe+0xdc/0x310 pc : [<c02574fc>] lr : [<c02de75c>] psr: 80000153 sp : ea883e48 ip : 00000000 fp : 00000000 r10: 0000000c r9 : c05de7ac r8 : eaabc600 r7 : eaa6b4d0 r6 : c0439e8c r5 : eaabc610 r4 : eab30e50 r3 : 00000000 r2 : 00000000 r1 : 0000000c r0 : 00000000 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xea882240) Backtrace: regmap_irq_get_virq s5m_rtc_probe platform_drv_probe driver_probe_device __driver_attach bus_for_each_dev bus_add_driver driver_register do_one_initcall kernel_init_freeable kernel_init ---[ end trace a954d7f019122700 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-30 06:18:53 +08:00
if (!info->irq) {
dev_info(&pdev->dev, "Alarm IRQ not available\n");
return 0;
}
ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
s5m_rtc_alarm_irq, 0, "rtc-alarm0",
info);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
info->irq, ret);
goto err;
}
return 0;
err:
i2c_unregister_device(info->i2c);
return ret;
}
static int s5m_rtc_remove(struct platform_device *pdev)
{
struct s5m_rtc_info *info = platform_get_drvdata(pdev);
i2c_unregister_device(info->i2c);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int s5m_rtc_resume(struct device *dev)
{
struct s5m_rtc_info *info = dev_get_drvdata(dev);
int ret = 0;
drivers/rtc/rtc-s5m.c: re-add support for devices without irq specified The rtc-s5m driver used to support devices without irq specified in the past. Re-add this support. The patch fixes boot for Insignal's Exynos4412 based Origen board. Error messages before the patch: ... Unable to handle kernel NULL pointer dereference at virtual address 00000094 pgd = c0004000 [00000094] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-next-20140804-00008-ga59480f-dirty #701 task: ea80f000 ti: ea882000 task.ti: ea882000 PC is at regmap_irq_get_virq+0x0/0x28 LR is at s5m_rtc_probe+0xdc/0x310 pc : [<c02574fc>] lr : [<c02de75c>] psr: 80000153 sp : ea883e48 ip : 00000000 fp : 00000000 r10: 0000000c r9 : c05de7ac r8 : eaabc600 r7 : eaa6b4d0 r6 : c0439e8c r5 : eaabc610 r4 : eab30e50 r3 : 00000000 r2 : 00000000 r1 : 0000000c r0 : 00000000 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xea882240) Backtrace: regmap_irq_get_virq s5m_rtc_probe platform_drv_probe driver_probe_device __driver_attach bus_for_each_dev bus_add_driver driver_register do_one_initcall kernel_init_freeable kernel_init ---[ end trace a954d7f019122700 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-30 06:18:53 +08:00
if (info->irq && device_may_wakeup(dev))
ret = disable_irq_wake(info->irq);
return ret;
}
static int s5m_rtc_suspend(struct device *dev)
{
struct s5m_rtc_info *info = dev_get_drvdata(dev);
int ret = 0;
drivers/rtc/rtc-s5m.c: re-add support for devices without irq specified The rtc-s5m driver used to support devices without irq specified in the past. Re-add this support. The patch fixes boot for Insignal's Exynos4412 based Origen board. Error messages before the patch: ... Unable to handle kernel NULL pointer dereference at virtual address 00000094 pgd = c0004000 [00000094] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-next-20140804-00008-ga59480f-dirty #701 task: ea80f000 ti: ea882000 task.ti: ea882000 PC is at regmap_irq_get_virq+0x0/0x28 LR is at s5m_rtc_probe+0xdc/0x310 pc : [<c02574fc>] lr : [<c02de75c>] psr: 80000153 sp : ea883e48 ip : 00000000 fp : 00000000 r10: 0000000c r9 : c05de7ac r8 : eaabc600 r7 : eaa6b4d0 r6 : c0439e8c r5 : eaabc610 r4 : eab30e50 r3 : 00000000 r2 : 00000000 r1 : 0000000c r0 : 00000000 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xea882240) Backtrace: regmap_irq_get_virq s5m_rtc_probe platform_drv_probe driver_probe_device __driver_attach bus_for_each_dev bus_add_driver driver_register do_one_initcall kernel_init_freeable kernel_init ---[ end trace a954d7f019122700 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-30 06:18:53 +08:00
if (info->irq && device_may_wakeup(dev))
ret = enable_irq_wake(info->irq);
return ret;
}
#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(s5m_rtc_pm_ops, s5m_rtc_suspend, s5m_rtc_resume);
static const struct platform_device_id s5m_rtc_id[] = {
{ "s5m-rtc", S5M8767X },
{ "s2mps13-rtc", S2MPS13X },
{ "s2mps14-rtc", S2MPS14X },
{ "s2mps15-rtc", S2MPS15X },
{ },
};
MODULE_DEVICE_TABLE(platform, s5m_rtc_id);
static struct platform_driver s5m_rtc_driver = {
.driver = {
.name = "s5m-rtc",
.pm = &s5m_rtc_pm_ops,
},
.probe = s5m_rtc_probe,
.remove = s5m_rtc_remove,
.id_table = s5m_rtc_id,
};
module_platform_driver(s5m_rtc_driver);
/* Module information */
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
MODULE_DESCRIPTION("Samsung S5M/S2MPS14 RTC driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:s5m-rtc");