p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/arch/arm/kernel/calls.S

406 lines
11 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* linux/arch/arm/kernel/calls.S
*
* Copyright (C) 1995-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
* This file is included thrice in entry-common.S
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
/* 0 */ CALL(sys_restart_syscall)
CALL(sys_exit)
arm: switch to generic fork/vfork/clone Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-22 03:54:27 +08:00
CALL(sys_fork)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_read)
CALL(sys_write)
/* 5 */ CALL(sys_open)
CALL(sys_close)
CALL(sys_ni_syscall) /* was sys_waitpid */
CALL(sys_creat)
CALL(sys_link)
/* 10 */ CALL(sys_unlink)
arm: get rid of execve wrapper, switch to generic execve() implementation Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-02 15:52:41 +08:00
CALL(sys_execve)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_chdir)
CALL(OBSOLETE(sys_time)) /* used by libc4 */
CALL(sys_mknod)
/* 15 */ CALL(sys_chmod)
CALL(sys_lchown16)
CALL(sys_ni_syscall) /* was sys_break */
CALL(sys_ni_syscall) /* was sys_stat */
CALL(sys_lseek)
/* 20 */ CALL(sys_getpid)
CALL(sys_mount)
CALL(OBSOLETE(sys_oldumount)) /* used by libc4 */
CALL(sys_setuid16)
CALL(sys_getuid16)
/* 25 */ CALL(OBSOLETE(sys_stime))
CALL(sys_ptrace)
CALL(OBSOLETE(sys_alarm)) /* used by libc4 */
CALL(sys_ni_syscall) /* was sys_fstat */
CALL(sys_pause)
/* 30 */ CALL(OBSOLETE(sys_utime)) /* used by libc4 */
CALL(sys_ni_syscall) /* was sys_stty */
CALL(sys_ni_syscall) /* was sys_getty */
CALL(sys_access)
CALL(sys_nice)
/* 35 */ CALL(sys_ni_syscall) /* was sys_ftime */
CALL(sys_sync)
CALL(sys_kill)
CALL(sys_rename)
CALL(sys_mkdir)
/* 40 */ CALL(sys_rmdir)
CALL(sys_dup)
CALL(sys_pipe)
CALL(sys_times)
CALL(sys_ni_syscall) /* was sys_prof */
/* 45 */ CALL(sys_brk)
CALL(sys_setgid16)
CALL(sys_getgid16)
CALL(sys_ni_syscall) /* was sys_signal */
CALL(sys_geteuid16)
/* 50 */ CALL(sys_getegid16)
CALL(sys_acct)
CALL(sys_umount)
CALL(sys_ni_syscall) /* was sys_lock */
CALL(sys_ioctl)
/* 55 */ CALL(sys_fcntl)
CALL(sys_ni_syscall) /* was sys_mpx */
CALL(sys_setpgid)
CALL(sys_ni_syscall) /* was sys_ulimit */
CALL(sys_ni_syscall) /* was sys_olduname */
/* 60 */ CALL(sys_umask)
CALL(sys_chroot)
CALL(sys_ustat)
CALL(sys_dup2)
CALL(sys_getppid)
/* 65 */ CALL(sys_getpgrp)
CALL(sys_setsid)
CALL(sys_sigaction)
CALL(sys_ni_syscall) /* was sys_sgetmask */
CALL(sys_ni_syscall) /* was sys_ssetmask */
/* 70 */ CALL(sys_setreuid16)
CALL(sys_setregid16)
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
CALL(sys_sigsuspend)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_sigpending)
CALL(sys_sethostname)
/* 75 */ CALL(sys_setrlimit)
CALL(OBSOLETE(sys_old_getrlimit)) /* used by libc4 */
CALL(sys_getrusage)
CALL(sys_gettimeofday)
CALL(sys_settimeofday)
/* 80 */ CALL(sys_getgroups16)
CALL(sys_setgroups16)
Add generic sys_old_select() Add a generic implementation of the old select() syscall, which expects its argument in a memory block and switch all architectures over to use it. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Acked-by: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Acked-by: David Howells <dhowells@redhat.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 07:21:13 +08:00
CALL(OBSOLETE(sys_old_select)) /* used by libc4 */
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_symlink)
CALL(sys_ni_syscall) /* was sys_lstat */
/* 85 */ CALL(sys_readlink)
CALL(sys_uselib)
CALL(sys_swapon)
CALL(sys_reboot)
[CVE-2009-0029] Rename old_readdir to sys_old_readdir This way it matches the generic system call name convention. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 21:13:55 +08:00
CALL(OBSOLETE(sys_old_readdir)) /* used by libc4 */
Add generic sys_old_mmap() Add a generic implementation of the old mmap() syscall, which expects its argument in a memory block and switch all architectures over to use it. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-11 07:21:15 +08:00
/* 90 */ CALL(OBSOLETE(sys_old_mmap)) /* used by libc4 */
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_munmap)
CALL(sys_truncate)
CALL(sys_ftruncate)
CALL(sys_fchmod)
/* 95 */ CALL(sys_fchown16)
CALL(sys_getpriority)
CALL(sys_setpriority)
CALL(sys_ni_syscall) /* was sys_profil */
CALL(sys_statfs)
/* 100 */ CALL(sys_fstatfs)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-18 02:23:10 +08:00
CALL(sys_ni_syscall) /* sys_ioperm */
[ARM] 3338/1: old ABI compat: sys_socketcall Patch from Nicolas Pitre Commit 99595d0237926b5aba1fe4c844a011a1ba1ee1f8 forgot to intercept sys_socketcall as well. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-17 06:36:13 +08:00
CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall)))
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_syslog)
CALL(sys_setitimer)
/* 105 */ CALL(sys_getitimer)
CALL(sys_newstat)
CALL(sys_newlstat)
CALL(sys_newfstat)
CALL(sys_ni_syscall) /* was sys_uname */
/* 110 */ CALL(sys_ni_syscall) /* was sys_iopl */
CALL(sys_vhangup)
CALL(sys_ni_syscall)
CALL(OBSOLETE(sys_syscall)) /* call a syscall */
CALL(sys_wait4)
/* 115 */ CALL(sys_swapoff)
CALL(sys_sysinfo)
CALL(OBSOLETE(ABI(sys_ipc, sys_oabi_ipc)))
CALL(sys_fsync)
CALL(sys_sigreturn_wrapper)
arm: switch to generic fork/vfork/clone Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-22 03:54:27 +08:00
/* 120 */ CALL(sys_clone)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_setdomainname)
CALL(sys_newuname)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-18 02:23:10 +08:00
CALL(sys_ni_syscall) /* modify_ldt */
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_adjtimex)
/* 125 */ CALL(sys_mprotect)
CALL(sys_sigprocmask)
CALL(sys_ni_syscall) /* was sys_create_module */
CALL(sys_init_module)
CALL(sys_delete_module)
/* 130 */ CALL(sys_ni_syscall) /* was sys_get_kernel_syms */
CALL(sys_quotactl)
CALL(sys_getpgid)
CALL(sys_fchdir)
CALL(sys_bdflush)
/* 135 */ CALL(sys_sysfs)
CALL(sys_personality)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-18 02:23:10 +08:00
CALL(sys_ni_syscall) /* reserved for afs_syscall */
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_setfsuid16)
CALL(sys_setfsgid16)
/* 140 */ CALL(sys_llseek)
CALL(sys_getdents)
CALL(sys_select)
CALL(sys_flock)
CALL(sys_msync)
/* 145 */ CALL(sys_readv)
CALL(sys_writev)
CALL(sys_getsid)
CALL(sys_fdatasync)
CALL(sys_sysctl)
/* 150 */ CALL(sys_mlock)
CALL(sys_munlock)
CALL(sys_mlockall)
CALL(sys_munlockall)
CALL(sys_sched_setparam)
/* 155 */ CALL(sys_sched_getparam)
CALL(sys_sched_setscheduler)
CALL(sys_sched_getscheduler)
CALL(sys_sched_yield)
CALL(sys_sched_get_priority_max)
/* 160 */ CALL(sys_sched_get_priority_min)
CALL(sys_sched_rr_get_interval)
CALL(sys_nanosleep)
arm: add arch_mmap_check(), get rid of sys_arm_mremap() Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-01 02:06:51 +08:00
CALL(sys_mremap)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_setresuid16)
/* 165 */ CALL(sys_getresuid16)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-18 02:23:10 +08:00
CALL(sys_ni_syscall) /* vm86 */
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_ni_syscall) /* was sys_query_module */
CALL(sys_poll)
All Arch: remove linkage for sys_nfsservctl system call The nfsservctl system call is now gone, so we should remove all linkage for it. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-27 06:03:11 +08:00
CALL(sys_ni_syscall) /* was nfsservctl */
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
/* 170 */ CALL(sys_setresgid16)
CALL(sys_getresgid16)
CALL(sys_prctl)
CALL(sys_rt_sigreturn_wrapper)
CALL(sys_rt_sigaction)
/* 175 */ CALL(sys_rt_sigprocmask)
CALL(sys_rt_sigpending)
CALL(sys_rt_sigtimedwait)
CALL(sys_rt_sigqueueinfo)
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
CALL(sys_rt_sigsuspend)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
/* 180 */ CALL(ABI(sys_pread64, sys_oabi_pread64))
CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
CALL(sys_chown16)
CALL(sys_getcwd)
CALL(sys_capget)
/* 185 */ CALL(sys_capset)
arm: switch to generic sigaltstack Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-23 14:52:54 +08:00
CALL(sys_sigaltstack)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_sendfile)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-18 02:23:10 +08:00
CALL(sys_ni_syscall) /* getpmsg */
CALL(sys_ni_syscall) /* putpmsg */
arm: switch to generic fork/vfork/clone Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-22 03:54:27 +08:00
/* 190 */ CALL(sys_vfork)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_getrlimit)
CALL(sys_mmap2)
CALL(ABI(sys_truncate64, sys_oabi_truncate64))
CALL(ABI(sys_ftruncate64, sys_oabi_ftruncate64))
/* 195 */ CALL(ABI(sys_stat64, sys_oabi_stat64))
CALL(ABI(sys_lstat64, sys_oabi_lstat64))
CALL(ABI(sys_fstat64, sys_oabi_fstat64))
CALL(sys_lchown)
CALL(sys_getuid)
/* 200 */ CALL(sys_getgid)
CALL(sys_geteuid)
CALL(sys_getegid)
CALL(sys_setreuid)
CALL(sys_setregid)
/* 205 */ CALL(sys_getgroups)
CALL(sys_setgroups)
CALL(sys_fchown)
CALL(sys_setresuid)
CALL(sys_getresuid)
/* 210 */ CALL(sys_setresgid)
CALL(sys_getresgid)
CALL(sys_chown)
CALL(sys_setuid)
CALL(sys_setgid)
/* 215 */ CALL(sys_setfsuid)
CALL(sys_setfsgid)
CALL(sys_getdents64)
CALL(sys_pivot_root)
CALL(sys_mincore)
/* 220 */ CALL(sys_madvise)
CALL(ABI(sys_fcntl64, sys_oabi_fcntl64))
CALL(sys_ni_syscall) /* TUX */
CALL(sys_ni_syscall)
CALL(sys_gettid)
/* 225 */ CALL(ABI(sys_readahead, sys_oabi_readahead))
CALL(sys_setxattr)
CALL(sys_lsetxattr)
CALL(sys_fsetxattr)
CALL(sys_getxattr)
/* 230 */ CALL(sys_lgetxattr)
CALL(sys_fgetxattr)
CALL(sys_listxattr)
CALL(sys_llistxattr)
CALL(sys_flistxattr)
/* 235 */ CALL(sys_removexattr)
CALL(sys_lremovexattr)
CALL(sys_fremovexattr)
CALL(sys_tkill)
CALL(sys_sendfile64)
/* 240 */ CALL(sys_futex)
CALL(sys_sched_setaffinity)
CALL(sys_sched_getaffinity)
CALL(sys_io_setup)
CALL(sys_io_destroy)
/* 245 */ CALL(sys_io_getevents)
CALL(sys_io_submit)
CALL(sys_io_cancel)
CALL(sys_exit_group)
CALL(sys_lookup_dcookie)
/* 250 */ CALL(sys_epoll_create)
CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl))
CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait))
[ARM] 5193/1: Wire up missing syscalls Setup some missing syscall pointed out by the checksyscalls.sh script. Fix two small whitespace issues while being there. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-12 18:15:02 +08:00
CALL(sys_remap_file_pages)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_ni_syscall) /* sys_set_thread_area */
/* 255 */ CALL(sys_ni_syscall) /* sys_get_thread_area */
[ARM] 5193/1: Wire up missing syscalls Setup some missing syscall pointed out by the checksyscalls.sh script. Fix two small whitespace issues while being there. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-12 18:15:02 +08:00
CALL(sys_set_tid_address)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_timer_create)
CALL(sys_timer_settime)
CALL(sys_timer_gettime)
/* 260 */ CALL(sys_timer_getoverrun)
CALL(sys_timer_delete)
CALL(sys_clock_settime)
CALL(sys_clock_gettime)
CALL(sys_clock_getres)
/* 265 */ CALL(sys_clock_nanosleep)
CALL(sys_statfs64_wrapper)
CALL(sys_fstatfs64_wrapper)
CALL(sys_tgkill)
CALL(sys_utimes)
/* 270 */ CALL(sys_arm_fadvise64_64)
CALL(sys_pciconfig_iobase)
CALL(sys_pciconfig_read)
CALL(sys_pciconfig_write)
CALL(sys_mq_open)
/* 275 */ CALL(sys_mq_unlink)
CALL(sys_mq_timedsend)
CALL(sys_mq_timedreceive)
CALL(sys_mq_notify)
CALL(sys_mq_getsetattr)
/* 280 */ CALL(sys_waitid)
CALL(sys_socket)
[ARM] 3308/1: old ABI compat: struct sockaddr_un Patch from Nicolas Pitre struct sockaddr_un loses its padding with EABI. Since the size of the structure is used as a validation test in unix_mkname(), we need to change the length argument to 110 whenever it is 112. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-09 05:19:36 +08:00
CALL(ABI(sys_bind, sys_oabi_bind))
CALL(ABI(sys_connect, sys_oabi_connect))
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_listen)
/* 285 */ CALL(sys_accept)
CALL(sys_getsockname)
CALL(sys_getpeername)
CALL(sys_socketpair)
CALL(sys_send)
[ARM] 3308/1: old ABI compat: struct sockaddr_un Patch from Nicolas Pitre struct sockaddr_un loses its padding with EABI. Since the size of the structure is used as a validation test in unix_mkname(), we need to change the length argument to 110 whenever it is 112. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-09 05:19:36 +08:00
/* 290 */ CALL(ABI(sys_sendto, sys_oabi_sendto))
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_recv)
CALL(sys_recvfrom)
CALL(sys_shutdown)
CALL(sys_setsockopt)
/* 295 */ CALL(sys_getsockopt)
[ARM] 3308/1: old ABI compat: struct sockaddr_un Patch from Nicolas Pitre struct sockaddr_un loses its padding with EABI. Since the size of the structure is used as a validation test in unix_mkname(), we need to change the length argument to 110 whenever it is 112. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-09 05:19:36 +08:00
CALL(ABI(sys_sendmsg, sys_oabi_sendmsg))
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
CALL(sys_recvmsg)
CALL(ABI(sys_semop, sys_oabi_semop))
CALL(sys_semget)
/* 300 */ CALL(sys_semctl)
CALL(sys_msgsnd)
CALL(sys_msgrcv)
CALL(sys_msgget)
CALL(sys_msgctl)
/* 305 */ CALL(sys_shmat)
CALL(sys_shmdt)
CALL(sys_shmget)
CALL(sys_shmctl)
CALL(sys_add_key)
/* 310 */ CALL(sys_request_key)
CALL(sys_keyctl)
CALL(ABI(sys_semtimedop, sys_oabi_semtimedop))
/* vserver */ CALL(sys_ni_syscall)
CALL(sys_ioprio_set)
/* 315 */ CALL(sys_ioprio_get)
CALL(sys_inotify_init)
CALL(sys_inotify_add_watch)
CALL(sys_inotify_rm_watch)
CALL(sys_mbind)
/* 320 */ CALL(sys_get_mempolicy)
CALL(sys_set_mempolicy)
[ARM] Add sys_*at syscalls Later glibc requires the *at syscalls. Add them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-10 00:41:55 +08:00
CALL(sys_openat)
CALL(sys_mkdirat)
CALL(sys_mknodat)
/* 325 */ CALL(sys_fchownat)
CALL(sys_futimesat)
[ARM] 4878/1: Add oabi shim for fstatat64 Ccoreutils and other have started using fstatat64. Thus, we need a shim for it if we want to support modern oldabi userlands (such as Debian/arm/lenny) with EABI kernels. See http://bugs.debian.org/462677 Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Riku Voipio <riku.voipio@movial.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-28 20:08:09 +08:00
CALL(ABI(sys_fstatat64, sys_oabi_fstatat64))
[ARM] Add sys_*at syscalls Later glibc requires the *at syscalls. Add them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-10 00:41:55 +08:00
CALL(sys_unlinkat)
CALL(sys_renameat)
/* 330 */ CALL(sys_linkat)
CALL(sys_symlinkat)
CALL(sys_readlinkat)
CALL(sys_fchmodat)
CALL(sys_faccessat)
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
/* 335 */ CALL(sys_pselect6)
CALL(sys_ppoll)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-18 02:23:10 +08:00
CALL(sys_unshare)
CALL(sys_set_robust_list)
CALL(sys_get_robust_list)
/* 340 */ CALL(sys_splice)
Introduce fixed sys_sync_file_range2() syscall, implement on PowerPC and ARM Not all the world is an i386. Many architectures need 64-bit arguments to be aligned in suitable pairs of registers, and the original sys_sync_file_range(int, loff_t, loff_t, int) was therefore wasting an argument register for padding after the first integer. Since we don't normally have more than 6 arguments for system calls, that left no room for the final argument on some architectures. Fix this by introducing sys_sync_file_range2(int, int, loff_t, loff_t) which all fits nicely. In fact, ARM already had that, but called it sys_arm_sync_file_range. Move it to fs/sync.c and rename it, then implement the needed compatibility routine. And stop the missing syscall check from bitching about the absence of sys_sync_file_range() if we've implemented sys_sync_file_range2() instead. Tested on PPC32 and with 32-bit and 64-bit userspace on PPC64. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 05:10:09 +08:00
CALL(sys_sync_file_range2)
[ARM] Add more syscalls Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-18 02:23:10 +08:00
CALL(sys_tee)
CALL(sys_vmsplice)
CALL(sys_move_pages)
/* 345 */ CALL(sys_getcpu)
ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait This patch adds support for TIF_RESTORE_SIGMASK to ARM's signal handling, which allows to hook up the pselect6, ppoll, and epoll_pwait syscalls on ARM. Tested here with eabi userspace and a test program with a deliberate race between a child's exit and the parent's sigprocmask/select sequence. Using sys_pselect6() instead of sigprocmask/select reliably prevents the race. The other arch's support for TIF_RESTORE_SIGMASK has evolved over time: In 2.6.16: - add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING - test both when checking for pending signal [changed later] - reimplement sys_sigsuspend() to use current->saved_sigmask, TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND; ditto for sys_rt_sigsuspend(), but drop private code and use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND; - there are now no "extra" calls to do_signal() so its oldset parameter is always &current->blocked so need not be passed, also its return value is changed to void - change handle_signal() to return 0/-errno - change do_signal() to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - hook up sys_pselect6() and sys_ppoll() In 2.6.19: - hook up sys_epoll_pwait() In 2.6.26: - allow archs to override how TIF_RESTORE_SIGMASK is implemented; default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again when checking for pending signal work; some archs now implement TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit - call set_restore_sigmask() in sys_sigsuspend() instead of setting TIF_RESTORE_SIGMASK In 2.6.29-rc: - kill sys_pselect7() which no arch wanted So for 2.6.31-rc6/ARM this patch does the following: - Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask() which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so TIF_RESTORE_SIGMASK need not claim one of the scarce low thread flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need not be extended for TIF_RESTORE_SIGMASK. - sys_sigsuspend() is reimplemented to use current->saved_sigmask and set_restore_sigmask(), making it identical to most other archs - The private code for sys_rt_sigsuspend() is removed, instead generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND. - sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs parameter, so their assembly code wrappers are removed. - handle_signal() is changed to return 0 on success or -errno. - The oldset parameter to do_signal() is now redundant and removed, and the return value is now also redundant and changed to void. - do_signal() is changed to honor TIF_RESTORE_SIGMASK: + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK is set + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK + if no signal was delivered and TIF_RESTORE_SIGMASK is set then clear it and restore the sigmask - Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 19:58:11 +08:00
CALL(sys_epoll_pwait)
[ARM] 4137/1: Add kexec support Add kexec support to ARM. Improvements like commandline handling could be made but this patch gives basic functional support. It uses the next available syscall number, 347. Once the syscall number is known, userspace support will be finalised/submitted to kexec-tools, various patches already exist. Originally based on a patch by Maxim Syrchin but updated and forward ported by various people. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-07 04:29:00 +08:00
CALL(sys_kexec_load)
[ARM] Update ARM syscalls Add utimensat, signalfd, timerfd, eventfd syscalls. Add ignore defines for sync_file_range and fadvise64_64 which we implement differently. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16 19:41:15 +08:00
CALL(sys_utimensat)
CALL(sys_signalfd)
[ARM] 4852/1: Add timerfd_create, timerfd_settime and timerfd_gettime syscall entries Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-06 23:22:00 +08:00
/* 350 */ CALL(sys_timerfd_create)
[ARM] Update ARM syscalls Add utimensat, signalfd, timerfd, eventfd syscalls. Add ignore defines for sync_file_range and fadvise64_64 which we implement differently. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16 19:41:15 +08:00
CALL(sys_eventfd)
[ARM] Add fallocate syscall entry Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-01 00:37:24 +08:00
CALL(sys_fallocate)
[ARM] 4852/1: Add timerfd_create, timerfd_settime and timerfd_gettime syscall entries Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-06 23:22:00 +08:00
CALL(sys_timerfd_settime)
CALL(sys_timerfd_gettime)
[ARM] 5193/1: Wire up missing syscalls Setup some missing syscall pointed out by the checksyscalls.sh script. Fix two small whitespace issues while being there. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-12 18:15:02 +08:00
/* 355 */ CALL(sys_signalfd4)
CALL(sys_eventfd2)
CALL(sys_epoll_create1)
CALL(sys_dup3)
CALL(sys_pipe2)
/* 360 */ CALL(sys_inotify_init1)
[ARM] 5456/1: add sys_preadv and sys_pwritev Kernel 2.6.30-rc1 added sys_preadv and sys_pwritev to most archs but not ARM, resulting in <stdin>:1421:2: warning: #warning syscall preadv not implemented <stdin>:1425:2: warning: #warning syscall pwritev not implemented This patch adds sys_preadv and sys_pwritev to ARM. These syscalls simply take five long-sized parameters, so they should have no calling-convention/ABI issues in the kernel. Tested on armv5tel eabi using a preadv/pwritev test program posted on linuxppc-dev earlier this month. It would be nice to get this into the kernel before 2.6.30 final, so that glibc's kernel version feature test for these syscalls doesn't have to special-case ARM. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-19 04:26:57 +08:00
CALL(sys_preadv)
CALL(sys_pwritev)
[ARM] wire up rt_tgsigqueueinfo and perf_counter_open Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-21 05:25:45 +08:00
CALL(sys_rt_tgsigqueueinfo)
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 18:02:48 +08:00
CALL(sys_perf_event_open)
net: Introduce recvmmsg socket syscall Meaning receive multiple messages, reducing the number of syscalls and net stack entry/exit operations. Next patches will introduce mechanisms where protocols that want to optimize this operation will provide an unlocked_recvmsg operation. This takes into account comments made by: . Paul Moore: sock_recvmsg is called only for the first datagram, sock_recvmsg_nosec is used for the rest. . Caitlin Bestler: recvmmsg now has a struct timespec timeout, that works in the same fashion as the ppoll one. If the underlying protocol returns a datagram with MSG_OOB set, this will make recvmmsg return right away with as many datagrams (+ the OOB one) it has received so far. . Rémi Denis-Courmont & Steven Whitehouse: If we receive N < vlen datagrams and then recvmsg returns an error, recvmmsg will return the successfully received datagrams, store the error and return it in the next call. This paves the way for a subsequent optimization, sk_prot->unlocked_recvmsg, where we will be able to acquire the lock only at batch start and end, not at every underlying recvmsg call. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 14:40:10 +08:00
/* 365 */ CALL(sys_recvmmsg)
ARM: 6329/1: wire up sys_accept4() on ARM sys_accept4() was added in kernel 2.6.28, but ARM was not updated to include it. The number and types of parameters is such that no ARM-specific processing is needed, so wiring up sys_accept4() just requires defining __NR_accept4 and adding a direct call in the syscall entry table. Tested with an EABI 2.6.35 kernel and Ulrich Drepper's original accept4() test program, modified to define __NR_accept4 for ARM. Using the updated unistd.h also eliminates a warning then building glibc (2.10.2 and newer) about accept4() being unimplemented. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-15 17:47:23 +08:00
CALL(sys_accept4)
ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARM The 2.6.36-rc kernel added three new system calls: fanotify_init, fanotify_mark, and prlimit64. This patch wires them up on ARM. The only non-trivial issue here is the u64 argument to sys_fanotify_mark(), but it is the 3rd argument and thus passed in r2/r3 in both kernel and user space, so it causes no problems. Tested with a 2.6.36-rc2 EABI kernel on an ixp4xx machine. Tested-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-26 03:49:01 +08:00
CALL(sys_fanotify_init)
CALL(sys_fanotify_mark)
CALL(sys_prlimit64)
ARM: Add new syscalls Add syscalls for name_to_handle_at, open_by_handle_at, clock_adjtime and syncfs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-15 20:26:40 +08:00
/* 370 */ CALL(sys_name_to_handle_at)
CALL(sys_open_by_handle_at)
CALL(sys_clock_adjtime)
CALL(sys_syncfs)
ARM: add sendmmsg syscall Commit 228e548e (net: Add sendmmsg socket system call) added the new sendmmsg syscall. Add this to the syscall table for ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-26 19:12:13 +08:00
CALL(sys_sendmmsg)
Merge branch 'setns' * setns: ns: Wire up the setns system call Done as a merge to make it easier to fix up conflicts in arm due to addition of sendmmsg system call
2011-05-29 01:51:01 +08:00
/* 375 */ CALL(sys_setns)
ARM: wire up process_vm_writev and process_vm_readv syscalls These two syscalls were introduced during the last merge window. Add the entries into the ARM call tables for them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-18 00:58:00 +08:00
CALL(sys_process_vm_readv)
CALL(sys_process_vm_writev)
ARM: 7665/1: Wire up kcmp syscall Wire up kcmp syscall for ability to proceed checkpoint/restore procedure on ARM platform. Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01 04:53:35 +08:00
CALL(sys_kcmp)
ARM: add finit_module syscall to ARM Add finit_module syscall to the ARM syscall list. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-16 10:08:47 +08:00
CALL(sys_finit_module)
sched: Add new scheduler syscalls to support an extended scheduling parameters ABI Add the syscalls needed for supporting scheduling algorithms with extended scheduling parameters (e.g., SCHED_DEADLINE). In general, it makes possible to specify a periodic/sporadic task, that executes for a given amount of runtime at each instance, and is scheduled according to the urgency of their own timing constraints, i.e.: - a (maximum/typical) instance execution time, - a minimum interval between consecutive instances, - a time constraint by which each instance must be completed. Thus, both the data structure that holds the scheduling parameters of the tasks and the system calls dealing with it must be extended. Unfortunately, modifying the existing struct sched_param would break the ABI and result in potentially serious compatibility issues with legacy binaries. For these reasons, this patch: - defines the new struct sched_attr, containing all the fields that are necessary for specifying a task in the computational model described above; - defines and implements the new scheduling related syscalls that manipulate it, i.e., sched_setattr() and sched_getattr(). Syscalls are introduced for x86 (32 and 64 bits) and ARM only, as a proof of concept and for developing and testing purposes. Making them available on other architectures is straightforward. Since no "user" for these new parameters is introduced in this patch, the implementation of the new system calls is just identical to their already existing counterpart. Future patches that implement scheduling policies able to exploit the new data structure must also take care of modifying the sched_*attr() calls accordingly with their own purposes. Signed-off-by: Dario Faggioli <raistlin@linux.it> [ Rewrote to use sched_attr. ] Signed-off-by: Juri Lelli <juri.lelli@gmail.com> [ Removed sched_setscheduler2() for now. ] Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1383831828-15501-3-git-send-email-juri.lelli@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:36 +08:00
/* 380 */ CALL(sys_sched_setattr)
CALL(sys_sched_getattr)
ARM: add renameat2 syscall Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> [dropped arch/arm/include/asm/unistd.h changes --rmk] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-11 18:25:39 +08:00
CALL(sys_renameat2)
ARM: add seccomp syscall Wires up the new seccomp syscall. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com>
2014-06-11 06:40:23 +08:00
CALL(sys_seccomp)
ARM: wire up getrandom syscall Add the new getrandom syscall for ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-08-08 17:56:34 +08:00
CALL(sys_getrandom)
ARM: wire up memfd_create syscall Add the memfd_create syscall to ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-08-09 15:43:11 +08:00
/* 385 */ CALL(sys_memfd_create)
ARM: enable bpf syscall Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-28 23:27:07 +08:00
CALL(sys_bpf)
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
[ARM] safer handling of syscall table padding ARM entry-common.S needs to know syscall table size; in itself that would not be a problem, but there's an additional constraint - some of the instructions using it want a constant that would be a multiple of 4. So we have to pad syscall table with sys_ni_syscall and that's where the trouble begins. .rept pseudo-op wants a constant expression for number of repetitions and subtraction of two labels (before and after syscall table) doesn't always get simplified to constant early enough for .rept. If labels end up in different frags, we lose. And while the frag size is large enough (slightly below 4Kb), the syscall table is about 1/3 of that. We used to get away with that, but the recent changes had been enough to trigger the breakage. Proper fix is simple: have a macro (CALL(x)) to populate the table instead of using explicit .long x and the first time we include calls.S have it defined to .equ NR_syscalls,NR_syscalls+1. Then we can find the proper amount of padding on the first inclusion simply by looking at NR_syscalls at that time. And that will be constant, no matter what. Moreover, the same trick kills the need of having an estimate of padded NR_syscalls - it will be calculated for free at the same time. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 20:57:01 +08:00
.rept syscalls_padding
CALL(sys_ni_syscall)
.endr