516 lines
12 KiB
C
516 lines
12 KiB
C
|
/*
|
||
|
|
* PCI autoconfiguration library
|
||
|
|
*
|
||
|
|
* Author: Matt Porter <mporter@mvista.com>
|
||
|
|
*
|
||
|
|
* 2001 (c) MontaVista, Software, Inc. This file is licensed under
|
||
|
|
* the terms of the GNU General Public License version 2. This program
|
||
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
||
|
|
* or implied.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The CardBus support is very preliminary. Preallocating space is
|
||
|
|
* the way to go but will require some change in card services to
|
||
|
|
* make it useful. Eventually this will ensure that we can put
|
||
|
|
* multiple CB bridges behind multiple P2P bridges. For now, at
|
||
|
|
* least it ensures that we place the CB bridge BAR and assigned
|
||
|
|
* initial bus numbers. I definitely need to do something about
|
||
|
|
* the lack of 16-bit I/O support. -MDP
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <linux/kernel.h>
|
||
|
|
#include <linux/init.h>
|
||
|
|
#include <linux/pci.h>
|
||
|
|
|
||
|
|
#include <asm/pci-bridge.h>
|
||
|
|
|
||
|
|
#define PCIAUTO_IDE_MODE_MASK 0x05
|
||
|
|
|
||
|
|
#undef DEBUG
|
||
|
|
|
||
|
|
#ifdef DEBUG
|
||
|
|
#define DBG(x...) printk(x)
|
||
|
|
#else
|
||
|
|
#define DBG(x...)
|
||
|
|
#endif /* DEBUG */
|
||
|
|
|
||
|
|
static int pciauto_upper_iospc;
|
||
|
|
static int pciauto_upper_memspc;
|
||
|
|
|
||
|
|
void __init pciauto_setup_bars(struct pci_controller *hose,
|
||
|
|
int current_bus,
|
||
|
|
int pci_devfn,
|
||
|
|
int bar_limit)
|
||
|
|
{
|
||
|
|
int bar_response, bar_size, bar_value;
|
||
|
|
int bar, addr_mask;
|
||
|
|
int * upper_limit;
|
||
|
|
int found_mem64 = 0;
|
||
|
|
|
||
|
|
DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
|
||
|
|
current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) );
|
||
|
|
|
||
|
|
for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
|
||
|
|
/* Tickle the BAR and get the response */
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
bar,
|
||
|
|
0xffffffff);
|
||
|
|
early_read_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
bar,
|
||
|
|
&bar_response);
|
||
|
|
|
||
|
|
/* If BAR is not implemented go to the next BAR */
|
||
|
|
if (!bar_response)
|
||
|
|
continue;
|
||
|
|
|
||
|
|
/* Check the BAR type and set our address mask */
|
||
|
|
if (bar_response & PCI_BASE_ADDRESS_SPACE) {
|
||
|
|
addr_mask = PCI_BASE_ADDRESS_IO_MASK;
|
||
|
|
upper_limit = &pciauto_upper_iospc;
|
||
|
|
DBG("PCI Autoconfig: BAR 0x%x, I/O, ", bar);
|
||
|
|
} else {
|
||
|
|
if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
|
||
|
|
PCI_BASE_ADDRESS_MEM_TYPE_64)
|
||
|
|
found_mem64 = 1;
|
||
|
|
|
||
|
|
addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
|
||
|
|
upper_limit = &pciauto_upper_memspc;
|
||
|
|
DBG("PCI Autoconfig: BAR 0x%x, Mem ", bar);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Calculate requested size */
|
||
|
|
bar_size = ~(bar_response & addr_mask) + 1;
|
||
|
|
|
||
|
|
/* Allocate a base address */
|
||
|
|
bar_value = (*upper_limit - bar_size) & ~(bar_size - 1);
|
||
|
|
|
||
|
|
/* Write it out and update our limit */
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
bar,
|
||
|
|
bar_value);
|
||
|
|
|
||
|
|
*upper_limit = bar_value;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* If we are a 64-bit decoder then increment to the
|
||
|
|
* upper 32 bits of the bar and force it to locate
|
||
|
|
* in the lower 4GB of memory.
|
||
|
|
*/
|
||
|
|
if (found_mem64) {
|
||
|
|
bar += 4;
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
bar,
|
||
|
|
0x00000000);
|
||
|
|
found_mem64 = 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
DBG("size=0x%x, address=0x%x\n",
|
||
|
|
bar_size, bar_value);
|
||
|
|
}
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
void __init pciauto_prescan_setup_bridge(struct pci_controller *hose,
|
||
|
|
int current_bus,
|
||
|
|
int pci_devfn,
|
||
|
|
int sub_bus,
|
||
|
|
int *iosave,
|
||
|
|
int *memsave)
|
||
|
|
{
|
||
|
|
/* Configure bus number registers */
|
||
|
|
early_write_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_PRIMARY_BUS,
|
||
|
|
current_bus);
|
||
|
|
early_write_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_SECONDARY_BUS,
|
||
|
|
sub_bus + 1);
|
||
|
|
early_write_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_SUBORDINATE_BUS,
|
||
|
|
0xff);
|
||
|
|
|
||
|
|
/* Round memory allocator to 1MB boundary */
|
||
|
|
pciauto_upper_memspc &= ~(0x100000 - 1);
|
||
|
|
*memsave = pciauto_upper_memspc;
|
||
|
|
|
||
|
|
/* Round I/O allocator to 4KB boundary */
|
||
|
|
pciauto_upper_iospc &= ~(0x1000 - 1);
|
||
|
|
*iosave = pciauto_upper_iospc;
|
||
|
|
|
||
|
|
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
|
||
|
|
early_write_config_word(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_MEMORY_LIMIT,
|
||
|
|
((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
|
||
|
|
early_write_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_IO_LIMIT,
|
||
|
|
((pciauto_upper_iospc - 1) & 0x0000f000) >> 8);
|
||
|
|
early_write_config_word(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_IO_LIMIT_UPPER16,
|
||
|
|
((pciauto_upper_iospc - 1) & 0xffff0000) >> 16);
|
||
|
|
|
||
|
|
/* Zero upper 32 bits of prefetchable base/limit */
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_PREF_BASE_UPPER32,
|
||
|
|
0);
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_PREF_LIMIT_UPPER32,
|
||
|
|
0);
|
||
|
|
}
|
||
|
|
|
||
|
|
void __init pciauto_postscan_setup_bridge(struct pci_controller *hose,
|
||
|
|
int current_bus,
|
||
|
|
int pci_devfn,
|
||
|
|
int sub_bus,
|
||
|
|
int *iosave,
|
||
|
|
int *memsave)
|
||
|
|
{
|
||
|
|
int cmdstat;
|
||
|
|
|
||
|
|
/* Configure bus number registers */
|
||
|
|
early_write_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_SUBORDINATE_BUS,
|
||
|
|
sub_bus);
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Round memory allocator to 1MB boundary.
|
||
|
|
* If no space used, allocate minimum.
|
||
|
|
*/
|
||
|
|
pciauto_upper_memspc &= ~(0x100000 - 1);
|
||
|
|
if (*memsave == pciauto_upper_memspc)
|
||
|
|
pciauto_upper_memspc -= 0x00100000;
|
||
|
|
|
||
|
|
early_write_config_word(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_MEMORY_BASE,
|
||
|
|
pciauto_upper_memspc >> 16);
|
||
|
|
|
||
|
|
/* Allocate 1MB for pre-fretch */
|
||
|
|
early_write_config_word(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_PREF_MEMORY_LIMIT,
|
||
|
|
((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
|
||
|
|
|
||
|
|
pciauto_upper_memspc -= 0x100000;
|
||
|
|
|
||
|
|
early_write_config_word(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_PREF_MEMORY_BASE,
|
||
|
|
pciauto_upper_memspc >> 16);
|
||
|
|
|
||
|
|
/* Round I/O allocator to 4KB boundary */
|
||
|
|
pciauto_upper_iospc &= ~(0x1000 - 1);
|
||
|
|
if (*iosave == pciauto_upper_iospc)
|
||
|
|
pciauto_upper_iospc -= 0x1000;
|
||
|
|
|
||
|
|
early_write_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_IO_BASE,
|
||
|
|
(pciauto_upper_iospc & 0x0000f000) >> 8);
|
||
|
|
early_write_config_word(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_IO_BASE_UPPER16,
|
||
|
|
pciauto_upper_iospc >> 16);
|
||
|
|
|
||
|
|
/* Enable memory and I/O accesses, enable bus master */
|
||
|
|
early_read_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_COMMAND,
|
||
|
|
&cmdstat);
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_COMMAND,
|
||
|
|
cmdstat |
|
||
|
|
PCI_COMMAND_IO |
|
||
|
|
PCI_COMMAND_MEMORY |
|
||
|
|
PCI_COMMAND_MASTER);
|
||
|
|
}
|
||
|
|
|
||
|
|
void __init pciauto_prescan_setup_cardbus_bridge(struct pci_controller *hose,
|
||
|
|
int current_bus,
|
||
|
|
int pci_devfn,
|
||
|
|
int sub_bus,
|
||
|
|
int *iosave,
|
||
|
|
int *memsave)
|
||
|
|
{
|
||
|
|
/* Configure bus number registers */
|
||
|
|
early_write_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_PRIMARY_BUS,
|
||
|
|
current_bus);
|
||
|
|
early_write_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_SECONDARY_BUS,
|
||
|
|
sub_bus + 1);
|
||
|
|
early_write_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_SUBORDINATE_BUS,
|
||
|
|
0xff);
|
||
|
|
|
||
|
|
/* Round memory allocator to 4KB boundary */
|
||
|
|
pciauto_upper_memspc &= ~(0x1000 - 1);
|
||
|
|
*memsave = pciauto_upper_memspc;
|
||
|
|
|
||
|
|
/* Round I/O allocator to 4 byte boundary */
|
||
|
|
pciauto_upper_iospc &= ~(0x4 - 1);
|
||
|
|
*iosave = pciauto_upper_iospc;
|
||
|
|
|
||
|
|
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
0x20,
|
||
|
|
pciauto_upper_memspc - 1);
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
0x30,
|
||
|
|
pciauto_upper_iospc - 1);
|
||
|
|
}
|
||
|
|
|
||
|
|
void __init pciauto_postscan_setup_cardbus_bridge(struct pci_controller *hose,
|
||
|
|
int current_bus,
|
||
|
|
int pci_devfn,
|
||
|
|
int sub_bus,
|
||
|
|
int *iosave,
|
||
|
|
int *memsave)
|
||
|
|
{
|
||
|
|
int cmdstat;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Configure subordinate bus number. The PCI subsystem
|
||
|
|
* bus scan will renumber buses (reserving three additional
|
||
|
|
* for this PCI<->CardBus bridge for the case where a CardBus
|
||
|
|
* adapter contains a P2P or CB2CB bridge.
|
||
|
|
*/
|
||
|
|
early_write_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_SUBORDINATE_BUS,
|
||
|
|
sub_bus);
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Reserve an additional 4MB for mem space and 16KB for
|
||
|
|
* I/O space. This should cover any additional space
|
||
|
|
* requirement of unusual CardBus devices with
|
||
|
|
* additional bridges that can consume more address space.
|
||
|
|
*
|
||
|
|
* Although pcmcia-cs currently will reprogram bridge
|
||
|
|
* windows, the goal is to add an option to leave them
|
||
|
|
* alone and use the bridge window ranges as the regions
|
||
|
|
* that are searched for free resources upon hot-insertion
|
||
|
|
* of a device. This will allow a PCI<->CardBus bridge
|
||
|
|
* configured by this routine to happily live behind a
|
||
|
|
* P2P bridge in a system.
|
||
|
|
*/
|
||
|
|
pciauto_upper_memspc -= 0x00400000;
|
||
|
|
pciauto_upper_iospc -= 0x00004000;
|
||
|
|
|
||
|
|
/* Round memory allocator to 4KB boundary */
|
||
|
|
pciauto_upper_memspc &= ~(0x1000 - 1);
|
||
|
|
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
0x1c,
|
||
|
|
pciauto_upper_memspc);
|
||
|
|
|
||
|
|
/* Round I/O allocator to 4 byte boundary */
|
||
|
|
pciauto_upper_iospc &= ~(0x4 - 1);
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
0x2c,
|
||
|
|
pciauto_upper_iospc);
|
||
|
|
|
||
|
|
/* Enable memory and I/O accesses, enable bus master */
|
||
|
|
early_read_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_COMMAND,
|
||
|
|
&cmdstat);
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_COMMAND,
|
||
|
|
cmdstat |
|
||
|
|
PCI_COMMAND_IO |
|
||
|
|
PCI_COMMAND_MEMORY |
|
||
|
|
PCI_COMMAND_MASTER);
|
||
|
|
}
|
||
|
|
|
||
|
|
int __init pciauto_bus_scan(struct pci_controller *hose, int current_bus)
|
||
|
|
{
|
||
|
|
int sub_bus, pci_devfn, pci_class, cmdstat, found_multi = 0;
|
||
|
|
unsigned short vid;
|
||
|
|
unsigned char header_type;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Fetch our I/O and memory space upper boundaries used
|
||
|
|
* to allocated base addresses on this hose.
|
||
|
|
*/
|
||
|
|
if (current_bus == hose->first_busno) {
|
||
|
|
pciauto_upper_iospc = hose->io_space.end + 1;
|
||
|
|
pciauto_upper_memspc = hose->mem_space.end + 1;
|
||
|
|
}
|
||
|
|
|
||
|
|
sub_bus = current_bus;
|
||
|
|
|
||
|
|
for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
|
||
|
|
/* Skip our host bridge */
|
||
|
|
if ( (current_bus == hose->first_busno) && (pci_devfn == 0) )
|
||
|
|
continue;
|
||
|
|
|
||
|
|
if (PCI_FUNC(pci_devfn) && !found_multi)
|
||
|
|
continue;
|
||
|
|
|
||
|
|
/* If config space read fails from this device, move on */
|
||
|
|
if (early_read_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_HEADER_TYPE,
|
||
|
|
&header_type))
|
||
|
|
continue;
|
||
|
|
|
||
|
|
if (!PCI_FUNC(pci_devfn))
|
||
|
|
found_multi = header_type & 0x80;
|
||
|
|
|
||
|
|
early_read_config_word(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_VENDOR_ID,
|
||
|
|
&vid);
|
||
|
|
|
||
|
|
if (vid != 0xffff) {
|
||
|
|
early_read_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_CLASS_REVISION, &pci_class);
|
||
|
|
if ( (pci_class >> 16) == PCI_CLASS_BRIDGE_PCI ) {
|
||
|
|
int iosave, memsave;
|
||
|
|
|
||
|
|
DBG("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_SLOT(pci_devfn));
|
||
|
|
/* Allocate PCI I/O and/or memory space */
|
||
|
|
pciauto_setup_bars(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_BASE_ADDRESS_1);
|
||
|
|
|
||
|
|
pciauto_prescan_setup_bridge(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
sub_bus,
|
||
|
|
&iosave,
|
||
|
|
&memsave);
|
||
|
|
sub_bus = pciauto_bus_scan(hose, sub_bus+1);
|
||
|
|
pciauto_postscan_setup_bridge(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
sub_bus,
|
||
|
|
&iosave,
|
||
|
|
&memsave);
|
||
|
|
} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
|
||
|
|
int iosave, memsave;
|
||
|
|
|
||
|
|
DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
|
||
|
|
/* Place CardBus Socket/ExCA registers */
|
||
|
|
pciauto_setup_bars(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_BASE_ADDRESS_0);
|
||
|
|
|
||
|
|
pciauto_prescan_setup_cardbus_bridge(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
sub_bus,
|
||
|
|
&iosave,
|
||
|
|
&memsave);
|
||
|
|
sub_bus = pciauto_bus_scan(hose, sub_bus+1);
|
||
|
|
pciauto_postscan_setup_cardbus_bridge(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
sub_bus,
|
||
|
|
&iosave,
|
||
|
|
&memsave);
|
||
|
|
} else {
|
||
|
|
if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
|
||
|
|
unsigned char prg_iface;
|
||
|
|
|
||
|
|
early_read_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_CLASS_PROG,
|
||
|
|
&prg_iface);
|
||
|
|
if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
|
||
|
|
DBG("PCI Autoconfig: Skipping legacy mode IDE controller\n");
|
||
|
|
continue;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
/* Allocate PCI I/O and/or memory space */
|
||
|
|
pciauto_setup_bars(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_BASE_ADDRESS_5);
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Enable some standard settings
|
||
|
|
*/
|
||
|
|
early_read_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_COMMAND,
|
||
|
|
&cmdstat);
|
||
|
|
early_write_config_dword(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_COMMAND,
|
||
|
|
cmdstat |
|
||
|
|
PCI_COMMAND_IO |
|
||
|
|
PCI_COMMAND_MEMORY |
|
||
|
|
PCI_COMMAND_MASTER);
|
||
|
|
early_write_config_byte(hose,
|
||
|
|
current_bus,
|
||
|
|
pci_devfn,
|
||
|
|
PCI_LATENCY_TIMER,
|
||
|
|
0x80);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
return sub_bus;
|
||
|
|
}
|