linux_old1/drivers/tty/serial/8250/8250_fsl.c

#include <linux/serial_reg.h>
#include <linux/serial_8250.h>

#include "8250.h"

/*
 * Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This isn't a full driver; it just provides an alternate IRQ
 * handler to deal with an errata.  Everything else is just
 * using the bog standard 8250 support.
 *
 * We follow code flow of serial8250_default_handle_irq() but add
 * a check for a break and insert a dummy read on the Rx for the
 * immediately following IRQ event.
 *
 * We re-use the already existing "bug handling" lsr_saved_flags
 * field to carry the "what we just did" information from the one
 * IRQ event to the next one.
 */

int fsl8250_handle_irq(struct uart_port *port)
{
	unsigned char lsr, orig_lsr;
	unsigned long flags;
	unsigned int iir;
	struct uart_8250_port *up = up_to_u8250p(port);

	spin_lock_irqsave(&up->port.lock, flags);

	iir = port->serial_in(port, UART_IIR);
	if (iir & UART_IIR_NO_INT) {
		spin_unlock_irqrestore(&up->port.lock, flags);
		return 0;
	}

	/* This is the WAR; if last event was BRK, then read and return */
	if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) {
		up->lsr_saved_flags &= ~UART_LSR_BI;
		port->serial_in(port, UART_RX);
		spin_unlock_irqrestore(&up->port.lock, flags);
		return 1;
	}

	lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR);

	if (lsr & (UART_LSR_DR | UART_LSR_BI))
		lsr = serial8250_rx_chars(up, lsr);

	serial8250_modem_status(up);

	if (lsr & UART_LSR_THRE)
		serial8250_tx_chars(up);

	up->lsr_saved_flags = orig_lsr;
	spin_unlock_irqrestore(&up->port.lock, flags);
	return 1;
}
EXPORT_SYMBOL_GPL(fsl8250_handle_irq);