linux_old1/drivers/base/regmap/regmap-mmio.c

391 lines
8.2 KiB
C
Raw Normal View History

/*
* Register map access API - MMIO support
*
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include "internal.h"
struct regmap_mmio_context {
void __iomem *regs;
unsigned val_bytes;
bool attached_clk;
struct clk *clk;
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
void (*reg_write)(struct regmap_mmio_context *ctx,
unsigned int reg, unsigned int val);
unsigned int (*reg_read)(struct regmap_mmio_context *ctx,
unsigned int reg);
};
static int regmap_mmio_regbits_check(size_t reg_bits)
{
switch (reg_bits) {
case 8:
case 16:
case 32:
#ifdef CONFIG_64BIT
case 64:
#endif
return 0;
default:
return -EINVAL;
}
}
static int regmap_mmio_get_min_stride(size_t val_bits)
{
int min_stride;
switch (val_bits) {
case 8:
/* The core treats 0 as 1 */
min_stride = 0;
return 0;
case 16:
min_stride = 2;
break;
case 32:
min_stride = 4;
break;
#ifdef CONFIG_64BIT
case 64:
min_stride = 8;
break;
#endif
default:
return -EINVAL;
}
return min_stride;
}
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
static void regmap_mmio_write8(struct regmap_mmio_context *ctx,
unsigned int reg,
unsigned int val)
{
writeb(val, ctx->regs + reg);
}
static void regmap_mmio_write16le(struct regmap_mmio_context *ctx,
unsigned int reg,
unsigned int val)
{
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
writew(val, ctx->regs + reg);
}
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
static void regmap_mmio_write16be(struct regmap_mmio_context *ctx,
unsigned int reg,
unsigned int val)
{
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
iowrite16be(val, ctx->regs + reg);
}
static void regmap_mmio_write32le(struct regmap_mmio_context *ctx,
unsigned int reg,
unsigned int val)
{
writel(val, ctx->regs + reg);
}
static void regmap_mmio_write32be(struct regmap_mmio_context *ctx,
unsigned int reg,
unsigned int val)
{
iowrite32be(val, ctx->regs + reg);
}
#ifdef CONFIG_64BIT
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
static void regmap_mmio_write64le(struct regmap_mmio_context *ctx,
unsigned int reg,
unsigned int val)
{
writeq(val, ctx->regs + reg);
}
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
#endif
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
static int regmap_mmio_write(void *context, unsigned int reg, unsigned int val)
{
struct regmap_mmio_context *ctx = context;
int ret;
if (!IS_ERR(ctx->clk)) {
ret = clk_enable(ctx->clk);
if (ret < 0)
return ret;
}
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
ctx->reg_write(ctx, reg, val);
if (!IS_ERR(ctx->clk))
clk_disable(ctx->clk);
return 0;
}
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
static unsigned int regmap_mmio_read8(struct regmap_mmio_context *ctx,
unsigned int reg)
{
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
return readb(ctx->regs + reg);
}
static unsigned int regmap_mmio_read16le(struct regmap_mmio_context *ctx,
unsigned int reg)
{
return readw(ctx->regs + reg);
}
static unsigned int regmap_mmio_read16be(struct regmap_mmio_context *ctx,
unsigned int reg)
{
return ioread16be(ctx->regs + reg);
}
static unsigned int regmap_mmio_read32le(struct regmap_mmio_context *ctx,
unsigned int reg)
{
return readl(ctx->regs + reg);
}
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
static unsigned int regmap_mmio_read32be(struct regmap_mmio_context *ctx,
unsigned int reg)
{
return ioread32be(ctx->regs + reg);
}
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
#ifdef CONFIG_64BIT
static unsigned int regmap_mmio_read64le(struct regmap_mmio_context *ctx,
unsigned int reg)
{
return readq(ctx->regs + reg);
}
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
#endif
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
static int regmap_mmio_read(void *context, unsigned int reg, unsigned int *val)
{
struct regmap_mmio_context *ctx = context;
int ret;
if (!IS_ERR(ctx->clk)) {
ret = clk_enable(ctx->clk);
if (ret < 0)
return ret;
}
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
*val = ctx->reg_read(ctx, reg);
if (!IS_ERR(ctx->clk))
clk_disable(ctx->clk);
return 0;
}
static void regmap_mmio_free_context(void *context)
{
struct regmap_mmio_context *ctx = context;
if (!IS_ERR(ctx->clk)) {
clk_unprepare(ctx->clk);
clk_put(ctx->clk);
}
kfree(context);
}
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
static const struct regmap_bus regmap_mmio = {
.fast_io = true,
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
.reg_write = regmap_mmio_write,
.reg_read = regmap_mmio_read,
.free_context = regmap_mmio_free_context,
.val_format_endian_default = REGMAP_ENDIAN_LITTLE,
};
static struct regmap_mmio_context *regmap_mmio_gen_context(struct device *dev,
const char *clk_id,
void __iomem *regs,
const struct regmap_config *config)
{
struct regmap_mmio_context *ctx;
int min_stride;
int ret;
ret = regmap_mmio_regbits_check(config->reg_bits);
if (ret)
return ERR_PTR(ret);
if (config->pad_bits)
return ERR_PTR(-EINVAL);
min_stride = regmap_mmio_get_min_stride(config->val_bits);
if (min_stride < 0)
return ERR_PTR(min_stride);
if (config->reg_stride < min_stride)
return ERR_PTR(-EINVAL);
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return ERR_PTR(-ENOMEM);
ctx->regs = regs;
ctx->val_bytes = config->val_bits / 8;
ctx->clk = ERR_PTR(-ENODEV);
switch (regmap_get_val_endian(dev, &regmap_mmio, config)) {
regmap: mmio: Convert to regmap_bus and fix accessor usage Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27 12:50:07 +08:00
case REGMAP_ENDIAN_DEFAULT:
case REGMAP_ENDIAN_LITTLE:
#ifdef __LITTLE_ENDIAN
case REGMAP_ENDIAN_NATIVE:
#endif
switch (config->val_bits) {
case 8:
ctx->reg_read = regmap_mmio_read8;
ctx->reg_write = regmap_mmio_write8;
break;
case 16:
ctx->reg_read = regmap_mmio_read16le;
ctx->reg_write = regmap_mmio_write16le;
break;
case 32:
ctx->reg_read = regmap_mmio_read32le;
ctx->reg_write = regmap_mmio_write32le;
break;
#ifdef CONFIG_64BIT
case 64:
ctx->reg_read = regmap_mmio_read64le;
ctx->reg_write = regmap_mmio_write64le;
break;
#endif
default:
ret = -EINVAL;
goto err_free;
}
break;
case REGMAP_ENDIAN_BIG:
#ifdef __BIG_ENDIAN
case REGMAP_ENDIAN_NATIVE:
#endif
switch (config->val_bits) {
case 8:
ctx->reg_read = regmap_mmio_read8;
ctx->reg_write = regmap_mmio_write8;
break;
case 16:
ctx->reg_read = regmap_mmio_read16be;
ctx->reg_write = regmap_mmio_write16be;
break;
case 32:
ctx->reg_read = regmap_mmio_read32be;
ctx->reg_write = regmap_mmio_write32be;
break;
default:
ret = -EINVAL;
goto err_free;
}
break;
default:
ret = -EINVAL;
goto err_free;
}
if (clk_id == NULL)
return ctx;
ctx->clk = clk_get(dev, clk_id);
if (IS_ERR(ctx->clk)) {
ret = PTR_ERR(ctx->clk);
goto err_free;
}
ret = clk_prepare(ctx->clk);
if (ret < 0) {
clk_put(ctx->clk);
goto err_free;
}
return ctx;
err_free:
kfree(ctx);
return ERR_PTR(ret);
}
struct regmap *__regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs,
const struct regmap_config *config,
struct lock_class_key *lock_key,
const char *lock_name)
{
struct regmap_mmio_context *ctx;
ctx = regmap_mmio_gen_context(dev, clk_id, regs, config);
if (IS_ERR(ctx))
return ERR_CAST(ctx);
return __regmap_init(dev, &regmap_mmio, ctx, config,
lock_key, lock_name);
}
EXPORT_SYMBOL_GPL(__regmap_init_mmio_clk);
struct regmap *__devm_regmap_init_mmio_clk(struct device *dev,
const char *clk_id,
void __iomem *regs,
const struct regmap_config *config,
struct lock_class_key *lock_key,
const char *lock_name)
{
struct regmap_mmio_context *ctx;
ctx = regmap_mmio_gen_context(dev, clk_id, regs, config);
if (IS_ERR(ctx))
return ERR_CAST(ctx);
return __devm_regmap_init(dev, &regmap_mmio, ctx, config,
lock_key, lock_name);
}
EXPORT_SYMBOL_GPL(__devm_regmap_init_mmio_clk);
int regmap_mmio_attach_clk(struct regmap *map, struct clk *clk)
{
struct regmap_mmio_context *ctx = map->bus_context;
ctx->clk = clk;
ctx->attached_clk = true;
return clk_prepare(ctx->clk);
}
EXPORT_SYMBOL_GPL(regmap_mmio_attach_clk);
void regmap_mmio_detach_clk(struct regmap *map)
{
struct regmap_mmio_context *ctx = map->bus_context;
clk_unprepare(ctx->clk);
ctx->attached_clk = false;
ctx->clk = NULL;
}
EXPORT_SYMBOL_GPL(regmap_mmio_detach_clk);
MODULE_LICENSE("GPL v2");