linux_old1/drivers/usb/serial/sierra.c

1137 lines
31 KiB
C
Raw Normal View History

/*
USB Driver for Sierra Wireless
Copyright (C) 2006, 2007, 2008 Kevin Lloyd <klloyd@sierrawireless.com>,
Copyright (C) 2008, 2009 Elina Pasheva, Matthew Safar, Rory Filer
<linux@sierrawireless.com>
IMPORTANT DISCLAIMER: This driver is not commercially supported by
Sierra Wireless. Use at your own risk.
This driver is free software; you can redistribute it and/or modify
it under the terms of Version 2 of the GNU General Public License as
published by the Free Software Foundation.
Portions based on the option driver by Matthias Urlichs <smurf@smurf.noris.de>
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
/* Uncomment to log function calls */
/* #define DEBUG */
#define DRIVER_VERSION "v.1.7.16"
#define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#define SWIMS_USB_REQUEST_SetPower 0x00
#define SWIMS_USB_REQUEST_SetNmea 0x07
#define N_IN_URB_HM 8
#define N_OUT_URB_HM 64
#define N_IN_URB 4
#define N_OUT_URB 4
#define IN_BUFLEN 4096
#define MAX_TRANSFER (PAGE_SIZE - 512)
/* MAX_TRANSFER is chosen so that the VM is not stressed by
allocations > PAGE_SIZE and the number of packets in a page
is an integer 512 is the largest possible packet on EHCI */
static int debug;
static int nmea;
/* Used in interface blacklisting */
struct sierra_iface_info {
const u32 infolen; /* number of interface numbers on blacklist */
const u8 *ifaceinfo; /* pointer to the array holding the numbers */
};
struct sierra_intf_private {
spinlock_t susp_lock;
unsigned int suspended:1;
int in_flight;
};
static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
{
int result;
dev_dbg(&udev->dev, "%s\n", __func__);
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
SWIMS_USB_REQUEST_SetPower, /* __u8 request */
USB_TYPE_VENDOR, /* __u8 request type */
swiState, /* __u16 value */
0, /* __u16 index */
NULL, /* void *data */
0, /* __u16 size */
USB_CTRL_SET_TIMEOUT); /* int timeout */
return result;
}
static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
{
int result;
dev_dbg(&udev->dev, "%s\n", __func__);
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
SWIMS_USB_REQUEST_SetNmea, /* __u8 request */
USB_TYPE_VENDOR, /* __u8 request type */
enable, /* __u16 value */
0x0000, /* __u16 index */
NULL, /* void *data */
0, /* __u16 size */
USB_CTRL_SET_TIMEOUT); /* int timeout */
return result;
}
static int sierra_calc_num_ports(struct usb_serial *serial)
{
int num_ports = 0;
u8 ifnum, numendpoints;
dev_dbg(&serial->dev->dev, "%s\n", __func__);
ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
/* Dummy interface present on some SKUs should be ignored */
if (ifnum == 0x99)
num_ports = 0;
else if (numendpoints <= 3)
num_ports = 1;
else
num_ports = (numendpoints-1)/2;
return num_ports;
}
static int is_blacklisted(const u8 ifnum,
const struct sierra_iface_info *blacklist)
{
const u8 *info;
int i;
if (blacklist) {
info = blacklist->ifaceinfo;
for (i = 0; i < blacklist->infolen; i++) {
if (info[i] == ifnum)
return 1;
}
}
return 0;
}
static int is_himemory(const u8 ifnum,
const struct sierra_iface_info *himemorylist)
{
const u8 *info;
int i;
if (himemorylist) {
info = himemorylist->ifaceinfo;
for (i=0; i < himemorylist->infolen; i++) {
if (info[i] == ifnum)
return 1;
}
}
return 0;
}
static int sierra_calc_interface(struct usb_serial *serial)
{
int interface;
struct usb_interface *p_interface;
struct usb_host_interface *p_host_interface;
dev_dbg(&serial->dev->dev, "%s\n", __func__);
/* Get the interface structure pointer from the serial struct */
p_interface = serial->interface;
/* Get a pointer to the host interface structure */
p_host_interface = p_interface->cur_altsetting;
/* read the interface descriptor for this active altsetting
* to find out the interface number we are on
*/
interface = p_host_interface->desc.bInterfaceNumber;
return interface;
}
static int sierra_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
int result = 0;
struct usb_device *udev;
struct sierra_intf_private *data;
u8 ifnum;
udev = serial->dev;
dev_dbg(&udev->dev, "%s\n", __func__);
ifnum = sierra_calc_interface(serial);
/*
* If this interface supports more than 1 alternate
* select the 2nd one
*/
if (serial->interface->num_altsetting == 2) {
dev_dbg(&udev->dev, "Selecting alt setting for interface %d\n",
ifnum);
/* We know the alternate setting is 1 for the MC8785 */
usb_set_interface(udev, ifnum, 1);
}
/* ifnum could have changed - by calling usb_set_interface */
ifnum = sierra_calc_interface(serial);
if (is_blacklisted(ifnum,
(struct sierra_iface_info *)id->driver_info)) {
dev_dbg(&serial->dev->dev,
"Ignoring blacklisted interface #%d\n", ifnum);
return -ENODEV;
}
data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL);
if (!data)
return -ENOMEM;
spin_lock_init(&data->susp_lock);
return result;
}
/* interfaces with higher memory requirements */
static const u8 hi_memory_typeA_ifaces[] = { 0, 2 };
static const struct sierra_iface_info typeA_interface_list = {
.infolen = ARRAY_SIZE(hi_memory_typeA_ifaces),
.ifaceinfo = hi_memory_typeA_ifaces,
};
static const u8 hi_memory_typeB_ifaces[] = { 3, 4, 5, 6 };
static const struct sierra_iface_info typeB_interface_list = {
.infolen = ARRAY_SIZE(hi_memory_typeB_ifaces),
.ifaceinfo = hi_memory_typeB_ifaces,
};
/* 'blacklist' of interfaces not served by this driver */
static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 };
static const struct sierra_iface_info direct_ip_interface_blacklist = {
.infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces),
.ifaceinfo = direct_ip_non_serial_ifaces,
};
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
{ USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */
{ USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0022) }, /* Sierra Wireless EM5725 */
{ USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0224) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
/* Sierra Wireless C597 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
/* Sierra Wireless T598 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless T11 */
{ USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless AC402 */
{ USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless MC5728 */
{ USB_DEVICE(0x1199, 0x0029) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6805) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6808) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6809) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
{ USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6816) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
{ USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */
{ USB_DEVICE(0x1199, 0x6822) }, /* Sierra Wireless AirCard 875E */
{ USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */
{ USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
{ USB_DEVICE(0x1199, 0x6834) }, /* Sierra Wireless MC8780 */
{ USB_DEVICE(0x1199, 0x6835) }, /* Sierra Wireless MC8781 */
{ USB_DEVICE(0x1199, 0x6838) }, /* Sierra Wireless MC8780 */
{ USB_DEVICE(0x1199, 0x6839) }, /* Sierra Wireless MC8781 */
{ USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */
{ USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */
/* Sierra Wireless MC8790, MC8791, MC8792 Composite */
{ USB_DEVICE(0x1199, 0x683C) },
{ USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8791 Composite */
/* Sierra Wireless MC8790, MC8791, MC8792 */
{ USB_DEVICE(0x1199, 0x683E) },
{ USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */
{ USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */
{ USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */
{ USB_DEVICE(0x1199, 0x6853) }, /* Sierra Wireless AirCard 881 E */
{ USB_DEVICE(0x1199, 0x6855) }, /* Sierra Wireless AirCard 880 U */
{ USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */
{ USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */
{ USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
/* Sierra Wireless C885 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
/* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
/* Sierra Wireless C22/C33 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
/* Sierra Wireless HSPA Non-Composite Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
{ USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
{ USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
{ }
};
MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_driver sierra_driver = {
.name = "sierra",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.suspend = usb_serial_suspend,
.resume = usb_serial_resume,
.id_table = id_table,
.no_dynamic_id = 1,
.supports_autosuspend = 1,
};
struct sierra_port_private {
spinlock_t lock; /* lock the structure */
int outstanding_urbs; /* number of out urbs in flight */
struct usb_anchor active;
struct usb_anchor delayed;
int num_out_urbs;
int num_in_urbs;
/* Input endpoints and buffers for this port */
struct urb *in_urbs[N_IN_URB_HM];
/* Settings for the port */
int rts_state; /* Handshaking pins (outputs) */
int dtr_state;
int cts_state; /* Handshaking pins (inputs) */
int dsr_state;
int dcd_state;
int ri_state;
unsigned int opened:1;
};
static int sierra_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
__u16 interface = 0;
int val = 0;
int do_send = 0;
int retval;
dev_dbg(&port->dev, "%s\n", __func__);
portdata = usb_get_serial_port_data(port);
if (portdata->dtr_state)
val |= 0x01;
if (portdata->rts_state)
val |= 0x02;
/* If composite device then properly report interface */
if (serial->num_ports == 1) {
interface = sierra_calc_interface(serial);
/* Control message is sent only to interfaces with
* interrupt_in endpoints
*/
if (port->interrupt_in_urb) {
/* send control message */
do_send = 1;
}
}
/* Otherwise the need to do non-composite mapping */
else {
if (port->bulk_out_endpointAddress == 2)
interface = 0;
else if (port->bulk_out_endpointAddress == 4)
interface = 1;
else if (port->bulk_out_endpointAddress == 5)
interface = 2;
do_send = 1;
}
if (!do_send)
return 0;
usb_autopm_get_interface(serial->interface);
retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT);
usb_autopm_put_interface(serial->interface);
return retval;
}
static void sierra_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
dev_dbg(&port->dev, "%s\n", __func__);
tty_termios_copy_hw(tty->termios, old_termios);
sierra_send_setup(port);
}
static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int value;
struct sierra_port_private *portdata;
dev_dbg(&port->dev, "%s\n", __func__);
portdata = usb_get_serial_port_data(port);
value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
((portdata->dtr_state) ? TIOCM_DTR : 0) |
((portdata->cts_state) ? TIOCM_CTS : 0) |
((portdata->dsr_state) ? TIOCM_DSR : 0) |
((portdata->dcd_state) ? TIOCM_CAR : 0) |
((portdata->ri_state) ? TIOCM_RNG : 0);
return value;
}
static int sierra_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct sierra_port_private *portdata;
portdata = usb_get_serial_port_data(port);
if (set & TIOCM_RTS)
portdata->rts_state = 1;
if (set & TIOCM_DTR)
portdata->dtr_state = 1;
if (clear & TIOCM_RTS)
portdata->rts_state = 0;
if (clear & TIOCM_DTR)
portdata->dtr_state = 0;
return sierra_send_setup(port);
}
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
static void sierra_release_urb(struct urb *urb)
{
struct usb_serial_port *port;
if (urb) {
port = urb->context;
dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
kfree(urb->transfer_buffer);
usb_free_urb(urb);
}
}
static void sierra_outdat_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
struct sierra_intf_private *intfdata;
int status = urb->status;
dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
intfdata = port->serial->private;
/* free up the transfer buffer, as usb_free_urb() does not do this */
kfree(urb->transfer_buffer);
usb_autopm_put_interface_async(port->serial->interface);
if (status)
dev_dbg(&port->dev, "%s - nonzero write bulk status "
"received: %d\n", __func__, status);
spin_lock(&portdata->lock);
--portdata->outstanding_urbs;
spin_unlock(&portdata->lock);
spin_lock(&intfdata->susp_lock);
--intfdata->in_flight;
spin_unlock(&intfdata->susp_lock);
usb_serial_port_softint(port);
}
/* Write */
static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count)
{
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
struct sierra_intf_private *intfdata;
struct usb_serial *serial = port->serial;
unsigned long flags;
unsigned char *buffer;
struct urb *urb;
size_t writesize = min((size_t)count, (size_t)MAX_TRANSFER);
int retval = 0;
/* verify that we actually have some data to write */
if (count == 0)
return 0;
portdata = usb_get_serial_port_data(port);
intfdata = serial->private;
dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize);
spin_lock_irqsave(&portdata->lock, flags);
dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__,
portdata->outstanding_urbs);
if (portdata->outstanding_urbs > portdata->num_out_urbs) {
spin_unlock_irqrestore(&portdata->lock, flags);
dev_dbg(&port->dev, "%s - write limit hit\n", __func__);
return 0;
}
portdata->outstanding_urbs++;
dev_dbg(&port->dev, "%s - 1, outstanding_urbs: %d\n", __func__,
portdata->outstanding_urbs);
spin_unlock_irqrestore(&portdata->lock, flags);
retval = usb_autopm_get_interface_async(serial->interface);
if (retval < 0) {
spin_lock_irqsave(&portdata->lock, flags);
portdata->outstanding_urbs--;
spin_unlock_irqrestore(&portdata->lock, flags);
goto error_simple;
}
buffer = kmalloc(writesize, GFP_ATOMIC);
if (!buffer) {
dev_err(&port->dev, "out of memory\n");
retval = -ENOMEM;
goto error_no_buffer;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
dev_err(&port->dev, "no more free urbs\n");
retval = -ENOMEM;
goto error_no_urb;
}
memcpy(buffer, buf, writesize);
usb_serial_debug_data(debug, &port->dev, __func__, writesize, buffer);
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev,
port->bulk_out_endpointAddress),
buffer, writesize, sierra_outdat_callback, port);
/* Handle the need to send a zero length packet */
urb->transfer_flags |= URB_ZERO_PACKET;
spin_lock_irqsave(&intfdata->susp_lock, flags);
if (intfdata->suspended) {
usb_anchor_urb(urb, &portdata->delayed);
spin_unlock_irqrestore(&intfdata->susp_lock, flags);
goto skip_power;
} else {
usb_anchor_urb(urb, &portdata->active);
}
/* send it down the pipe */
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval) {
usb_unanchor_urb(urb);
spin_unlock_irqrestore(&intfdata->susp_lock, flags);
dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
"with status = %d\n", __func__, retval);
goto error;
} else {
intfdata->in_flight++;
spin_unlock_irqrestore(&intfdata->susp_lock, flags);
}
skip_power:
/* we are done with this urb, so let the host driver
* really free it when it is finished with it */
usb_free_urb(urb);
return writesize;
error:
usb_free_urb(urb);
error_no_urb:
kfree(buffer);
error_no_buffer:
spin_lock_irqsave(&portdata->lock, flags);
--portdata->outstanding_urbs;
dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__,
portdata->outstanding_urbs);
spin_unlock_irqrestore(&portdata->lock, flags);
usb_autopm_put_interface_async(serial->interface);
error_simple:
return retval;
}
static void sierra_indat_callback(struct urb *urb)
{
int err;
int endpoint;
struct usb_serial_port *port;
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
endpoint = usb_pipeendpoint(urb->pipe);
port = urb->context;
dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
if (status) {
dev_dbg(&port->dev, "%s: nonzero status: %d on"
" endpoint %02x\n", __func__, status, endpoint);
} else {
if (urb->actual_length) {
tty = tty_port_tty_get(&port->port);
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
tty_kref_put(tty);
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
} else {
dev_dbg(&port->dev, "%s: empty read urb"
" received\n", __func__);
}
}
/* Resubmit urb so we continue receiving */
if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
usb_mark_last_busy(port->serial->dev);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dev_err(&port->dev, "resubmit read urb failed."
"(%d)\n", err);
}
return;
}
static void sierra_instat_callback(struct urb *urb)
{
int err;
int status = urb->status;
struct usb_serial_port *port = urb->context;
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
dev_dbg(&port->dev, "%s: urb %p port %p has data %p\n", __func__,
urb, port, portdata);
if (status == 0) {
struct usb_ctrlrequest *req_pkt =
(struct usb_ctrlrequest *)urb->transfer_buffer;
if (!req_pkt) {
dev_dbg(&port->dev, "%s: NULL req_pkt\n",
__func__);
return;
}
if ((req_pkt->bRequestType == 0xA1) &&
(req_pkt->bRequest == 0x20)) {
int old_dcd_state;
unsigned char signals = *((unsigned char *)
urb->transfer_buffer +
sizeof(struct usb_ctrlrequest));
struct tty_struct *tty;
dev_dbg(&port->dev, "%s: signal x%x\n", __func__,
signals);
old_dcd_state = portdata->dcd_state;
portdata->cts_state = 1;
portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
tty = tty_port_tty_get(&port->port);
if (tty && !C_CLOCAL(tty) &&
old_dcd_state && !portdata->dcd_state)
tty_hangup(tty);
tty_kref_put(tty);
} else {
dev_dbg(&port->dev, "%s: type %x req %x\n",
__func__, req_pkt->bRequestType,
req_pkt->bRequest);
}
} else
dev_dbg(&port->dev, "%s: error %d\n", __func__, status);
/* Resubmit urb so we continue receiving IRQ data */
if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) {
usb_mark_last_busy(serial->dev);
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dev_err(&port->dev, "%s: resubmit intr urb "
"failed. (%d)\n", __func__, err);
}
}
static int sierra_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
unsigned long flags;
dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
/* try to give a good number back based on if we have any free urbs at
* this point in time */
spin_lock_irqsave(&portdata->lock, flags);
if (portdata->outstanding_urbs > (portdata->num_out_urbs * 2) / 3) {
spin_unlock_irqrestore(&portdata->lock, flags);
dev_dbg(&port->dev, "%s - write limit hit\n", __func__);
return 0;
}
spin_unlock_irqrestore(&portdata->lock, flags);
return 2048;
}
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
static void sierra_stop_rx_urbs(struct usb_serial_port *port)
{
int i;
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
for (i = 0; i < portdata->num_in_urbs; i++)
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
usb_kill_urb(portdata->in_urbs[i]);
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
usb_kill_urb(port->interrupt_in_urb);
}
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
static int sierra_submit_rx_urbs(struct usb_serial_port *port, gfp_t mem_flags)
{
int ok_cnt;
int err = -EINVAL;
int i;
struct urb *urb;
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
ok_cnt = 0;
for (i = 0; i < portdata->num_in_urbs; i++) {
urb = portdata->in_urbs[i];
if (!urb)
continue;
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
err = usb_submit_urb(urb, mem_flags);
if (err) {
dev_err(&port->dev, "%s: submit urb failed: %d\n",
__func__, err);
} else {
ok_cnt++;
}
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
}
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
if (ok_cnt && port->interrupt_in_urb) {
err = usb_submit_urb(port->interrupt_in_urb, mem_flags);
if (err) {
dev_err(&port->dev, "%s: submit intr urb failed: %d\n",
__func__, err);
}
}
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
if (ok_cnt > 0) /* at least one rx urb submitted */
return 0;
else
return err;
}
static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint,
int dir, void *ctx, int len,
gfp_t mem_flags,
usb_complete_t callback)
{
struct urb *urb;
u8 *buf;
if (endpoint == -1)
return NULL;
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
urb = usb_alloc_urb(0, mem_flags);
if (urb == NULL) {
dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n",
__func__, endpoint);
return NULL;
}
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
buf = kmalloc(len, mem_flags);
if (buf) {
/* Fill URB using supplied data */
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev, endpoint) | dir,
buf, len, callback, ctx);
/* debug */
dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__,
dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
} else {
dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__,
dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
sierra_release_urb(urb);
urb = NULL;
}
return urb;
}
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
static void sierra_close(struct usb_serial_port *port)
{
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
int i;
struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
struct sierra_intf_private *intfdata = port->serial->private;
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
dev_dbg(&port->dev, "%s\n", __func__);
portdata = usb_get_serial_port_data(port);
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
portdata->rts_state = 0;
portdata->dtr_state = 0;
if (serial->dev) {
mutex_lock(&serial->disc_mutex);
if (!serial->disconnected) {
serial->interface->needs_remote_wakeup = 0;
usb_autopm_get_interface(serial->interface);
sierra_send_setup(port);
}
mutex_unlock(&serial->disc_mutex);
spin_lock_irq(&intfdata->susp_lock);
portdata->opened = 0;
spin_unlock_irq(&intfdata->susp_lock);
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
/* Stop reading urbs */
sierra_stop_rx_urbs(port);
/* .. and release them */
for (i = 0; i < portdata->num_in_urbs; i++) {
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
sierra_release_urb(portdata->in_urbs[i]);
portdata->in_urbs[i] = NULL;
}
}
}
static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
{
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
struct sierra_port_private *portdata;
struct usb_serial *serial = port->serial;
struct sierra_intf_private *intfdata = serial->private;
int i;
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
int err;
int endpoint;
struct urb *urb;
portdata = usb_get_serial_port_data(port);
dev_dbg(&port->dev, "%s\n", __func__);
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
/* Set some sane defaults */
portdata->rts_state = 1;
portdata->dtr_state = 1;
endpoint = port->bulk_in_endpointAddress;
for (i = 0; i < portdata->num_in_urbs; i++) {
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port,
IN_BUFLEN, GFP_KERNEL,
sierra_indat_callback);
portdata->in_urbs[i] = urb;
}
/* clear halt condition */
usb_clear_halt(serial->dev,
usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN);
err = sierra_submit_rx_urbs(port, GFP_KERNEL);
if (err) {
/* get rid of everything as in close */
sierra_close(port);
/* restore balance for autopm */
usb_autopm_put_interface(serial->interface);
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
return err;
}
sierra_send_setup(port);
serial->interface->needs_remote_wakeup = 1;
spin_lock_irq(&intfdata->susp_lock);
portdata->opened = 1;
spin_unlock_irq(&intfdata->susp_lock);
usb_autopm_put_interface(serial->interface);
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
return 0;
}
static void sierra_dtr_rts(struct usb_serial_port *port, int on)
{
struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
portdata = usb_get_serial_port_data(port);
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
portdata->rts_state = on;
portdata->dtr_state = on;
if (serial->dev) {
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
mutex_lock(&serial->disc_mutex);
if (!serial->disconnected)
sierra_send_setup(port);
mutex_unlock(&serial->disc_mutex);
}
}
static int sierra_startup(struct usb_serial *serial)
{
struct usb_serial_port *port;
struct sierra_port_private *portdata;
struct sierra_iface_info *himemoryp = NULL;
int i;
u8 ifnum;
dev_dbg(&serial->dev->dev, "%s\n", __func__);
/* Set Device mode to D0 */
sierra_set_power_state(serial->dev, 0x0000);
/* Check NMEA and set */
if (nmea)
sierra_vsc_set_nmea(serial->dev, 1);
/* Now setup per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
if (!portdata) {
dev_dbg(&port->dev, "%s: kmalloc for "
"sierra_port_private (%d) failed!\n",
__func__, i);
return -ENOMEM;
}
spin_lock_init(&portdata->lock);
init_usb_anchor(&portdata->active);
init_usb_anchor(&portdata->delayed);
ifnum = i;
/* Assume low memory requirements */
portdata->num_out_urbs = N_OUT_URB;
portdata->num_in_urbs = N_IN_URB;
/* Determine actual memory requirements */
if (serial->num_ports == 1) {
/* Get interface number for composite device */
ifnum = sierra_calc_interface(serial);
himemoryp =
(struct sierra_iface_info *)&typeB_interface_list;
if (is_himemory(ifnum, himemoryp)) {
portdata->num_out_urbs = N_OUT_URB_HM;
portdata->num_in_urbs = N_IN_URB_HM;
}
}
else {
himemoryp =
(struct sierra_iface_info *)&typeA_interface_list;
if (is_himemory(i, himemoryp)) {
portdata->num_out_urbs = N_OUT_URB_HM;
portdata->num_in_urbs = N_IN_URB_HM;
}
}
dev_dbg(&serial->dev->dev,
"Memory usage (urbs) interface #%d, in=%d, out=%d\n",
ifnum,portdata->num_in_urbs, portdata->num_out_urbs );
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
/* Set the port private data pointer */
usb_set_serial_port_data(port, portdata);
}
return 0;
}
static void sierra_release(struct usb_serial *serial)
{
sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 21:30:21 +08:00
int i;
struct usb_serial_port *port;
struct sierra_port_private *portdata;
dev_dbg(&serial->dev->dev, "%s\n", __func__);
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
if (!port)
continue;
portdata = usb_get_serial_port_data(port);
if (!portdata)
continue;
kfree(portdata);
}
}
#ifdef CONFIG_PM
static void stop_read_write_urbs(struct usb_serial *serial)
{
int i;
struct usb_serial_port *port;
struct sierra_port_private *portdata;
/* Stop reading/writing urbs */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
sierra_stop_rx_urbs(port);
usb_kill_anchored_urbs(&portdata->active);
}
}
static int sierra_suspend(struct usb_serial *serial, pm_message_t message)
{
struct sierra_intf_private *intfdata;
int b;
if (message.event & PM_EVENT_AUTO) {
intfdata = serial->private;
spin_lock_irq(&intfdata->susp_lock);
b = intfdata->in_flight;
if (b) {
spin_unlock_irq(&intfdata->susp_lock);
return -EBUSY;
} else {
intfdata->suspended = 1;
spin_unlock_irq(&intfdata->susp_lock);
}
}
stop_read_write_urbs(serial);
return 0;
}
static int sierra_resume(struct usb_serial *serial)
{
struct usb_serial_port *port;
struct sierra_intf_private *intfdata = serial->private;
struct sierra_port_private *portdata;
struct urb *urb;
int ec = 0;
int i, err;
spin_lock_irq(&intfdata->susp_lock);
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
while ((urb = usb_get_from_anchor(&portdata->delayed))) {
usb_anchor_urb(urb, &portdata->active);
intfdata->in_flight++;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
intfdata->in_flight--;
usb_unanchor_urb(urb);
usb_scuttle_anchored_urbs(&portdata->delayed);
break;
}
}
if (portdata->opened) {
err = sierra_submit_rx_urbs(port, GFP_ATOMIC);
if (err)
ec++;
}
}
intfdata->suspended = 0;
spin_unlock_irq(&intfdata->susp_lock);
return ec ? -EIO : 0;
}
#else
#define sierra_suspend NULL
#define sierra_resume NULL
#endif
static struct usb_serial_driver sierra_device = {
.driver = {
.owner = THIS_MODULE,
.name = "sierra",
},
.description = "Sierra USB modem",
.id_table = id_table,
.usb_driver = &sierra_driver,
.calc_num_ports = sierra_calc_num_ports,
.probe = sierra_probe,
.open = sierra_open,
.close = sierra_close,
.dtr_rts = sierra_dtr_rts,
.write = sierra_write,
.write_room = sierra_write_room,
.set_termios = sierra_set_termios,
.tiocmget = sierra_tiocmget,
.tiocmset = sierra_tiocmset,
.attach = sierra_startup,
.release = sierra_release,
.suspend = sierra_suspend,
.resume = sierra_resume,
.read_int_callback = sierra_instat_callback,
};
/* Functions used by new usb-serial code. */
static int __init sierra_init(void)
{
int retval;
retval = usb_serial_register(&sierra_device);
if (retval)
goto failed_device_register;
retval = usb_register(&sierra_driver);
if (retval)
goto failed_driver_register;
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
DRIVER_DESC "\n");
return 0;
failed_driver_register:
usb_serial_deregister(&sierra_device);
failed_device_register:
return retval;
}
static void __exit sierra_exit(void)
{
usb_deregister(&sierra_driver);
usb_serial_deregister(&sierra_device);
}
module_init(sierra_init);
module_exit(sierra_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
module_param(nmea, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(nmea, "NMEA streaming");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug messages");