p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/net/can/Makefile

32 lines
837 B
Makefile
Raw Normal View History

[CAN]: Add virtual CAN netdevice driver This patch adds the virtual CAN bus (vcan) network driver. The vcan device is just a loopback device for CAN frames, no real CAN hardware is involved. Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Urs Thuermann <urs.thuermann@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-17 07:56:08 +08:00
#
# Makefile for the Linux Controller Area Network drivers.
#
obj-$(CONFIG_CAN_VCAN) += vcan.o
can: add slcan driver for serial/USB-serial CAN adapters This patch adds support for serial/USB-serial CAN adapters implementing the LAWICEL ASCII protocol for CAN frame transport over serial lines. The driver implements the SLCAN line discipline and is heavily based on the slip.c driver. Therefore the code style remains similar to slip.c to be able to apply changes of the SLIP driver to the SLCAN driver easily. For more details see the slcan Kconfig entry. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02 18:57:59 +08:00
obj-$(CONFIG_CAN_SLCAN) += slcan.o
can: CAN Network device driver and Netlink interface The CAN network device driver interface provides a generic interface to setup, configure and monitor CAN network devices. It exports a set of common data structures and functions, which all real CAN network device drivers should use. Please have a look to the SJA1000 or MSCAN driver to understand how to use them. The name of the module is can-dev.ko. Furthermore, it adds a Netlink interface allowing to configure the CAN device using the program "ip" from the iproute2 utility suite. For further information please check "Documentation/networking/can.txt" Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-16 07:39:29 +08:00
obj-$(CONFIG_CAN_DEV) += can-dev.o
can-dev-y := dev.o
can: add tx/rx LED trigger support This patch implements the functions to add two LED triggers, named <ifname>-tx and <ifname>-rx, to a canbus device driver. Triggers are called from specific handlers by each CAN device driver and can be disabled altogether with a Kconfig option. The implementation keeps the LED on when the interface is UP and blinks the LED on network activity at a configurable rate. This only supports can-dev based drivers, as it uses some support field in the can_priv structure. Supported drivers should call devm_can_led_init() and can_led_event() as needed. Cleanup is handled automatically by devres, so no *_exit function is needed. Supported events are: - CAN_LED_EVENT_OPEN: turn on tx/rx LEDs - CAN_LED_EVENT_STOP: turn off tx/rx LEDs - CAN_LED_EVENT_TX: trigger tx LED blink - CAN_LED_EVENT_RX: trigger tx LED blink Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-12-19 01:50:55 +08:00
can-dev-$(CONFIG_CAN_LEDS) += led.o
can: move SPI drivers into a separate directory Create a directory for all CAN drivers using SPI and move mcp251x driver there. Signed-off-by: Stefano Babic <sbabic@denx.de> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-03-25 22:30:21 +08:00
obj-y += spi/
ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface This patch adds support for one channel CAN/USB interace CPC-USB/ARM7 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.com). Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 10:04:20 +08:00
obj-y += usb/
can: add driver for Softing card This patch adds a driver for the platform:softing device. This will create (up to) 2 CAN network devices from 1 platform:softing device Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11 12:32:31 +08:00
obj-y += softing/
ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface This patch adds support for one channel CAN/USB interace CPC-USB/ARM7 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.com). Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 10:04:20 +08:00
can: Driver for the SJA1000 CAN controller This patch adds the generic Socket-CAN driver for the Philips SJA1000 full CAN controller. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-16 07:39:30 +08:00
obj-$(CONFIG_CAN_SJA1000) += sja1000/
net/can: add driver for mscan family & mpc52xx_mscan Taken from socketcan-svn, fixed remaining todos, cleaned up, tested with a phyCORE-MPC5200B-IO and a custom board. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-13 14:14:52 +08:00
obj-$(CONFIG_CAN_MSCAN) += mscan/
can: c_can: Added support for Bosch C_CAN controller Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14 14:51:44 +08:00
obj-$(CONFIG_CAN_C_CAN) += c_can/
can: cc770: add driver core for the Bosch CC770 and Intel AN82527 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 07:41:18 +08:00
obj-$(CONFIG_CAN_CC770) += cc770/
at91_can: add driver for Atmel's CAN controller on AT91SAM9263 This patch add the driver for the SoC CAN controller in Atmel's AT91SAM9263. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-23 05:46:57 +08:00
obj-$(CONFIG_CAN_AT91) += at91_can.o
can: add TI CAN (HECC) driver TI HECC (High End CAN Controller) module is found on many TI devices. It has 32 hardware mailboxes with full implementation of CAN protocol 2.0B with bus speeds up to 1Mbps. Specifications of the module are available on TI web <http://www.ti.com> Signed-off-by: Anant Gole <anantgole@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 10:59:47 +08:00
obj-$(CONFIG_CAN_TI_HECC) += ti_hecc.o
can: add the driver for Analog Devices Blackfin on-chip CAN controllers Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: H.J. Oertel <oe@port.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11 07:46:28 +08:00
obj-$(CONFIG_CAN_BFIN) += bfin_can.o
can: Add support for Janz VMOD-ICAN3 Intelligent CAN module The Janz VMOD-ICAN3 is a MODULbus daughterboard which fits onto any MODULbus carrier board. It is an intelligent CAN controller with a microcontroller and associated firmware. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-30 00:58:51 +08:00
obj-$(CONFIG_CAN_JANZ_ICAN3) += janz-ican3.o
CAN: Add Flexcan CAN controller driver This core is found on some Freescale SoCs and also some Coldfire SoCs. Support for Coldfire is missing though at the moment as they have an older revision of the core which does not have RX FIFO support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2009-07-29 16:20:10 +08:00
obj-$(CONFIG_CAN_FLEXCAN) += flexcan.o
can: Topcliff: Add PCH_CAN driver. CAN driver of Topcliff PCH Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platform. All IO peripherals in Topcliff PCH are actually devices sitting on AMBA bus. Topcliff PCH has CAN I/F. This driver enables CAN function. Signed-off-by: Masayuki Ohtake <masa-korg@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-15 11:00:28 +08:00
obj-$(CONFIG_PCH_CAN) += pch_can.o
can: grcan: Add device driver for GRCAN and GRHCAN cores This driver supports GRCAN and CRHCAN CAN controllers available in the GRLIB VHDL IP core library. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-15 15:47:14 +08:00
obj-$(CONFIG_CAN_GRCAN) += grcan.o
can: add Renesas R-Car CAN driver Add support for the CAN controller found in Renesas R-Car SoCs. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-05-17 04:03:54 +08:00
obj-$(CONFIG_CAN_RCAR) += rcar_can.o
can: xilinx CAN controller support This patch adds xilinx CAN controller support. This driver supports both ZYNQ CANPS and Soft IP AXI CAN controller. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-05-21 15:00:59 +08:00
obj-$(CONFIG_CAN_XILINXCAN) += xilinx_can.o
can: Driver for the SJA1000 CAN controller This patch adds the generic Socket-CAN driver for the Philips SJA1000 full CAN controller. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-16 07:39:30 +08:00
net: can: use kbuild magic to inherit debug settings No need to manually copy debug settings into subdir Makefiles. kbuild has a mechanism for inheriting, so let's use it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-08-18 06:38:24 +08:00
subdir-ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG