linux_old1/lib/lz4/lz4hc_compress.c

540 lines
12 KiB
C
Raw Normal View History

lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:49 +08:00
/*
* LZ4 HC - High Compression Mode of LZ4
* Copyright (C) 2011-2012, Yann Collet.
* BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following disclaimer
* in the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You can contact the author at :
* - LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html
* - LZ4 source repository : http://code.google.com/p/lz4/
*
* Changed for kernel use by:
* Chanho Min <chanho.min@lge.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/lz4.h>
#include <asm/unaligned.h>
#include "lz4defs.h"
struct lz4hc_data {
const u8 *base;
HTYPE hashtable[HASHTABLESIZE];
u16 chaintable[MAXD];
const u8 *nexttoupdate;
} __attribute__((__packed__));
static inline int lz4hc_init(struct lz4hc_data *hc4, const u8 *base)
{
memset((void *)hc4->hashtable, 0, sizeof(hc4->hashtable));
memset(hc4->chaintable, 0xFF, sizeof(hc4->chaintable));
#if LZ4_ARCH64
hc4->nexttoupdate = base + 1;
#else
hc4->nexttoupdate = base;
#endif
hc4->base = base;
return 1;
}
/* Update chains up to ip (excluded) */
static inline void lz4hc_insert(struct lz4hc_data *hc4, const u8 *ip)
{
u16 *chaintable = hc4->chaintable;
HTYPE *hashtable = hc4->hashtable;
#if LZ4_ARCH64
const BYTE * const base = hc4->base;
#else
const int base = 0;
#endif
while (hc4->nexttoupdate < ip) {
const u8 *p = hc4->nexttoupdate;
size_t delta = p - (hashtable[HASH_VALUE(p)] + base);
if (delta > MAX_DISTANCE)
delta = MAX_DISTANCE;
chaintable[(size_t)(p) & MAXD_MASK] = (u16)delta;
hashtable[HASH_VALUE(p)] = (p) - base;
hc4->nexttoupdate++;
}
}
static inline size_t lz4hc_commonlength(const u8 *p1, const u8 *p2,
const u8 *const matchlimit)
{
const u8 *p1t = p1;
while (p1t < matchlimit - (STEPSIZE - 1)) {
#if LZ4_ARCH64
u64 diff = A64(p2) ^ A64(p1t);
#else
u32 diff = A32(p2) ^ A32(p1t);
#endif
if (!diff) {
p1t += STEPSIZE;
p2 += STEPSIZE;
continue;
}
p1t += LZ4_NBCOMMONBYTES(diff);
return p1t - p1;
}
#if LZ4_ARCH64
if ((p1t < (matchlimit-3)) && (A32(p2) == A32(p1t))) {
p1t += 4;
p2 += 4;
}
#endif
if ((p1t < (matchlimit - 1)) && (A16(p2) == A16(p1t))) {
p1t += 2;
p2 += 2;
}
if ((p1t < matchlimit) && (*p2 == *p1t))
p1t++;
return p1t - p1;
}
static inline int lz4hc_insertandfindbestmatch(struct lz4hc_data *hc4,
const u8 *ip, const u8 *const matchlimit, const u8 **matchpos)
{
u16 *const chaintable = hc4->chaintable;
HTYPE *const hashtable = hc4->hashtable;
const u8 *ref;
#if LZ4_ARCH64
const BYTE * const base = hc4->base;
#else
const int base = 0;
#endif
int nbattempts = MAX_NB_ATTEMPTS;
size_t repl = 0, ml = 0;
u16 delta;
/* HC4 match finder */
lz4hc_insert(hc4, ip);
ref = hashtable[HASH_VALUE(ip)] + base;
/* potential repetition */
if (ref >= ip-4) {
/* confirmed */
if (A32(ref) == A32(ip)) {
delta = (u16)(ip-ref);
repl = ml = lz4hc_commonlength(ip + MINMATCH,
ref + MINMATCH, matchlimit) + MINMATCH;
*matchpos = ref;
}
ref -= (size_t)chaintable[(size_t)(ref) & MAXD_MASK];
}
while ((ref >= ip - MAX_DISTANCE) && nbattempts) {
nbattempts--;
if (*(ref + ml) == *(ip + ml)) {
if (A32(ref) == A32(ip)) {
size_t mlt =
lz4hc_commonlength(ip + MINMATCH,
ref + MINMATCH, matchlimit) + MINMATCH;
if (mlt > ml) {
ml = mlt;
*matchpos = ref;
}
}
}
ref -= (size_t)chaintable[(size_t)(ref) & MAXD_MASK];
}
/* Complete table */
if (repl) {
const BYTE *ptr = ip;
const BYTE *end;
end = ip + repl - (MINMATCH-1);
/* Pre-Load */
while (ptr < end - delta) {
chaintable[(size_t)(ptr) & MAXD_MASK] = delta;
ptr++;
}
do {
chaintable[(size_t)(ptr) & MAXD_MASK] = delta;
/* Head of chain */
hashtable[HASH_VALUE(ptr)] = (ptr) - base;
ptr++;
} while (ptr < end);
hc4->nexttoupdate = end;
}
return (int)ml;
}
static inline int lz4hc_insertandgetwidermatch(struct lz4hc_data *hc4,
const u8 *ip, const u8 *startlimit, const u8 *matchlimit, int longest,
const u8 **matchpos, const u8 **startpos)
{
u16 *const chaintable = hc4->chaintable;
HTYPE *const hashtable = hc4->hashtable;
#if LZ4_ARCH64
const BYTE * const base = hc4->base;
#else
const int base = 0;
#endif
const u8 *ref;
int nbattempts = MAX_NB_ATTEMPTS;
int delta = (int)(ip - startlimit);
/* First Match */
lz4hc_insert(hc4, ip);
ref = hashtable[HASH_VALUE(ip)] + base;
while ((ref >= ip - MAX_DISTANCE) && (ref >= hc4->base)
&& (nbattempts)) {
nbattempts--;
if (*(startlimit + longest) == *(ref - delta + longest)) {
if (A32(ref) == A32(ip)) {
const u8 *reft = ref + MINMATCH;
const u8 *ipt = ip + MINMATCH;
const u8 *startt = ip;
while (ipt < matchlimit-(STEPSIZE - 1)) {
#if LZ4_ARCH64
u64 diff = A64(reft) ^ A64(ipt);
#else
u32 diff = A32(reft) ^ A32(ipt);
#endif
if (!diff) {
ipt += STEPSIZE;
reft += STEPSIZE;
continue;
}
ipt += LZ4_NBCOMMONBYTES(diff);
goto _endcount;
}
#if LZ4_ARCH64
if ((ipt < (matchlimit - 3))
&& (A32(reft) == A32(ipt))) {
ipt += 4;
reft += 4;
}
ipt += 2;
#endif
if ((ipt < (matchlimit - 1))
&& (A16(reft) == A16(ipt))) {
reft += 2;
}
if ((ipt < matchlimit) && (*reft == *ipt))
ipt++;
_endcount:
reft = ref;
while ((startt > startlimit)
&& (reft > hc4->base)
&& (startt[-1] == reft[-1])) {
startt--;
reft--;
}
if ((ipt - startt) > longest) {
longest = (int)(ipt - startt);
*matchpos = reft;
*startpos = startt;
}
}
}
ref -= (size_t)chaintable[(size_t)(ref) & MAXD_MASK];
}
return longest;
}
static inline int lz4_encodesequence(const u8 **ip, u8 **op, const u8 **anchor,
int ml, const u8 *ref)
{
int length, len;
u8 *token;
/* Encode Literal length */
length = (int)(*ip - *anchor);
token = (*op)++;
if (length >= (int)RUN_MASK) {
*token = (RUN_MASK << ML_BITS);
len = length - RUN_MASK;
for (; len > 254 ; len -= 255)
*(*op)++ = 255;
*(*op)++ = (u8)len;
} else
*token = (length << ML_BITS);
/* Copy Literals */
LZ4_BLINDCOPY(*anchor, *op, length);
/* Encode Offset */
LZ4_WRITE_LITTLEENDIAN_16(*op, (u16)(*ip - ref));
/* Encode MatchLength */
len = (int)(ml - MINMATCH);
if (len >= (int)ML_MASK) {
*token += ML_MASK;
len -= ML_MASK;
for (; len > 509 ; len -= 510) {
*(*op)++ = 255;
*(*op)++ = 255;
}
if (len > 254) {
len -= 255;
*(*op)++ = 255;
}
*(*op)++ = (u8)len;
} else
*token += len;
/* Prepare next loop */
*ip += ml;
*anchor = *ip;
return 0;
}
static int lz4_compresshcctx(struct lz4hc_data *ctx,
const char *source,
char *dest,
int isize)
{
const u8 *ip = (const u8 *)source;
const u8 *anchor = ip;
const u8 *const iend = ip + isize;
const u8 *const mflimit = iend - MFLIMIT;
const u8 *const matchlimit = (iend - LASTLITERALS);
u8 *op = (u8 *)dest;
int ml, ml2, ml3, ml0;
const u8 *ref = NULL;
const u8 *start2 = NULL;
const u8 *ref2 = NULL;
const u8 *start3 = NULL;
const u8 *ref3 = NULL;
const u8 *start0;
const u8 *ref0;
int lastrun;
ip++;
/* Main Loop */
while (ip < mflimit) {
ml = lz4hc_insertandfindbestmatch(ctx, ip, matchlimit, (&ref));
if (!ml) {
ip++;
continue;
}
/* saved, in case we would skip too much */
start0 = ip;
ref0 = ref;
ml0 = ml;
_search2:
if (ip+ml < mflimit)
ml2 = lz4hc_insertandgetwidermatch(ctx, ip + ml - 2,
ip + 1, matchlimit, ml, &ref2, &start2);
else
ml2 = ml;
/* No better match */
if (ml2 == ml) {
lz4_encodesequence(&ip, &op, &anchor, ml, ref);
continue;
}
if (start0 < ip) {
/* empirical */
if (start2 < ip + ml0) {
ip = start0;
ref = ref0;
ml = ml0;
}
}
/*
* Here, start0==ip
* First Match too small : removed
*/
if ((start2 - ip) < 3) {
ml = ml2;
ip = start2;
ref = ref2;
goto _search2;
}
_search3:
/*
* Currently we have :
* ml2 > ml1, and
* ip1+3 <= ip2 (usually < ip1+ml1)
*/
if ((start2 - ip) < OPTIMAL_ML) {
int correction;
int new_ml = ml;
if (new_ml > OPTIMAL_ML)
new_ml = OPTIMAL_ML;
if (ip + new_ml > start2 + ml2 - MINMATCH)
new_ml = (int)(start2 - ip) + ml2 - MINMATCH;
correction = new_ml - (int)(start2 - ip);
if (correction > 0) {
start2 += correction;
ref2 += correction;
ml2 -= correction;
}
}
/*
* Now, we have start2 = ip+new_ml,
* with new_ml=min(ml, OPTIMAL_ML=18)
*/
if (start2 + ml2 < mflimit)
ml3 = lz4hc_insertandgetwidermatch(ctx,
start2 + ml2 - 3, start2, matchlimit,
ml2, &ref3, &start3);
else
ml3 = ml2;
/* No better match : 2 sequences to encode */
if (ml3 == ml2) {
/* ip & ref are known; Now for ml */
if (start2 < ip+ml)
ml = (int)(start2 - ip);
/* Now, encode 2 sequences */
lz4_encodesequence(&ip, &op, &anchor, ml, ref);
ip = start2;
lz4_encodesequence(&ip, &op, &anchor, ml2, ref2);
continue;
}
/* Not enough space for match 2 : remove it */
if (start3 < ip + ml + 3) {
/*
* can write Seq1 immediately ==> Seq2 is removed,
* so Seq3 becomes Seq1
*/
if (start3 >= (ip + ml)) {
if (start2 < ip + ml) {
int correction =
(int)(ip + ml - start2);
start2 += correction;
ref2 += correction;
ml2 -= correction;
if (ml2 < MINMATCH) {
start2 = start3;
ref2 = ref3;
ml2 = ml3;
}
}
lz4_encodesequence(&ip, &op, &anchor, ml, ref);
ip = start3;
ref = ref3;
ml = ml3;
start0 = start2;
ref0 = ref2;
ml0 = ml2;
goto _search2;
}
start2 = start3;
ref2 = ref3;
ml2 = ml3;
goto _search3;
}
/*
* OK, now we have 3 ascending matches; let's write at least
* the first one ip & ref are known; Now for ml
*/
if (start2 < ip + ml) {
if ((start2 - ip) < (int)ML_MASK) {
int correction;
if (ml > OPTIMAL_ML)
ml = OPTIMAL_ML;
if (ip + ml > start2 + ml2 - MINMATCH)
ml = (int)(start2 - ip) + ml2
- MINMATCH;
correction = ml - (int)(start2 - ip);
if (correction > 0) {
start2 += correction;
ref2 += correction;
ml2 -= correction;
}
} else
ml = (int)(start2 - ip);
}
lz4_encodesequence(&ip, &op, &anchor, ml, ref);
ip = start2;
ref = ref2;
ml = ml2;
start2 = start3;
ref2 = ref3;
ml2 = ml3;
goto _search3;
}
/* Encode Last Literals */
lastrun = (int)(iend - anchor);
if (lastrun >= (int)RUN_MASK) {
*op++ = (RUN_MASK << ML_BITS);
lastrun -= RUN_MASK;
for (; lastrun > 254 ; lastrun -= 255)
*op++ = 255;
*op++ = (u8) lastrun;
} else
*op++ = (lastrun << ML_BITS);
memcpy(op, anchor, iend - anchor);
op += iend - anchor;
/* End */
return (int) (((char *)op) - dest);
}
int lz4hc_compress(const unsigned char *src, size_t src_len,
unsigned char *dst, size_t *dst_len, void *wrkmem)
{
int ret = -1;
int out_len = 0;
struct lz4hc_data *hc4 = (struct lz4hc_data *)wrkmem;
lz4hc_init(hc4, (const u8 *)src);
out_len = lz4_compresshcctx((struct lz4hc_data *)hc4, (const u8 *)src,
(char *)dst, (int)src_len);
if (out_len < 0)
goto exit;
*dst_len = out_len;
return 0;
exit:
return ret;
}
EXPORT_SYMBOL(lz4hc_compress);
lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:49 +08:00
MODULE_LICENSE("Dual BSD/GPL");
lib: add lz4 compressor module This patchset is for supporting LZ4 compression and the crypto API using it. As shown below, the size of data is a little bit bigger but compressing speed is faster under the enabled unaligned memory access. We can use lz4 de/compression through crypto API as well. Also, It will be useful for another potential user of lz4 compression. lz4 Compression Benchmark: Compiler: ARM gcc 4.6.4 ARMv7, 1 GHz based board Kernel: linux 3.4 Uncompressed data Size: 101 MB Compressed Size compression Speed LZO 72.1MB 32.1MB/s, 33.0MB/s(UA) LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA) LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA) - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch: Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs for kernel are based on LZ4 implementation by Yann Collet and were changed for kernel coding style. LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository : http://code.google.com/p/lz4/ svn revision : r90 Two APIs are added: lz4_compress() support basic lz4 compression whereas lz4hc_compress() support high compression or CPU performance get lower but compression ratio get higher. Also, we require the pre-allocated working memory with the defined size and destination buffer must be allocated with the size of lz4_compressbound. [akpm@linux-foundation.org: make lz4_compresshcctx() static] Signed-off-by: Chanho Min <chanho.min@lge.com> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Richard Weinberger <richard@nod.at> Cc: Herbert Xu <herbert@gondor.hengli.com.au> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:49 +08:00
MODULE_DESCRIPTION("LZ4HC compressor");