linux_old1/kernel/power/snapshot.c

1316 lines
33 KiB
C
Raw Normal View History

/*
* linux/kernel/power/snapshot.c
*
* This file provide system snapshot/restore functionality.
*
* Copyright (C) 1998-2005 Pavel Machek <pavel@suse.cz>
*
* This file is released under the GPLv2, and is based on swsusp.c.
*
*/
#include <linux/version.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/suspend.h>
#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/spinlock.h>
#include <linux/kernel.h>
#include <linux/pm.h>
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/syscalls.h>
#include <linux/console.h>
#include <linux/highmem.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/io.h>
#include "power.h"
/* List of PBEs used for creating and restoring the suspend image */
struct pbe *restore_pblist;
static unsigned int nr_copy_pages;
static unsigned int nr_meta_pages;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
static void *buffer;
#ifdef CONFIG_HIGHMEM
unsigned int count_highmem_pages(void)
{
struct zone *zone;
unsigned long zone_pfn;
unsigned int n = 0;
for_each_zone (zone)
if (is_highmem(zone)) {
mark_free_pages(zone);
for (zone_pfn = 0; zone_pfn < zone->spanned_pages; zone_pfn++) {
struct page *page;
unsigned long pfn = zone_pfn + zone->zone_start_pfn;
if (!pfn_valid(pfn))
continue;
page = pfn_to_page(pfn);
if (PageReserved(page))
continue;
if (PageNosaveFree(page))
continue;
n++;
}
}
return n;
}
struct highmem_page {
char *data;
struct page *page;
struct highmem_page *next;
};
static struct highmem_page *highmem_copy;
static int save_highmem_zone(struct zone *zone)
{
unsigned long zone_pfn;
mark_free_pages(zone);
for (zone_pfn = 0; zone_pfn < zone->spanned_pages; ++zone_pfn) {
struct page *page;
struct highmem_page *save;
void *kaddr;
unsigned long pfn = zone_pfn + zone->zone_start_pfn;
if (!(pfn%10000))
printk(".");
if (!pfn_valid(pfn))
continue;
page = pfn_to_page(pfn);
/*
* This condition results from rvmalloc() sans vmalloc_32()
* and architectural memory reservations. This should be
* corrected eventually when the cases giving rise to this
* are better understood.
*/
if (PageReserved(page))
continue;
BUG_ON(PageNosave(page));
if (PageNosaveFree(page))
continue;
save = kmalloc(sizeof(struct highmem_page), GFP_ATOMIC);
if (!save)
return -ENOMEM;
save->next = highmem_copy;
save->page = page;
save->data = (void *) get_zeroed_page(GFP_ATOMIC);
if (!save->data) {
kfree(save);
return -ENOMEM;
}
kaddr = kmap_atomic(page, KM_USER0);
memcpy(save->data, kaddr, PAGE_SIZE);
kunmap_atomic(kaddr, KM_USER0);
highmem_copy = save;
}
return 0;
}
int save_highmem(void)
{
struct zone *zone;
int res = 0;
pr_debug("swsusp: Saving Highmem");
drain_local_pages();
for_each_zone (zone) {
if (is_highmem(zone))
res = save_highmem_zone(zone);
if (res)
return res;
}
printk("\n");
return 0;
}
int restore_highmem(void)
{
printk("swsusp: Restoring Highmem\n");
while (highmem_copy) {
struct highmem_page *save = highmem_copy;
void *kaddr;
highmem_copy = save->next;
kaddr = kmap_atomic(save->page, KM_USER0);
memcpy(kaddr, save->data, PAGE_SIZE);
kunmap_atomic(kaddr, KM_USER0);
free_page((long) save->data);
kfree(save);
}
return 0;
}
#else
static inline unsigned int count_highmem_pages(void) {return 0;}
static inline int save_highmem(void) {return 0;}
static inline int restore_highmem(void) {return 0;}
#endif
/**
* @safe_needed - on resume, for storing the PBE list and the image,
* we can only use memory pages that do not conflict with the pages
* used before suspend.
*
* The unsafe pages are marked with the PG_nosave_free flag
* and we count them using unsafe_pages
*/
#define PG_ANY 0
#define PG_SAFE 1
#define PG_UNSAFE_CLEAR 1
#define PG_UNSAFE_KEEP 0
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
static unsigned int allocated_unsafe_pages;
static void *alloc_image_page(gfp_t gfp_mask, int safe_needed)
{
void *res;
res = (void *)get_zeroed_page(gfp_mask);
if (safe_needed)
while (res && PageNosaveFree(virt_to_page(res))) {
/* The page is unsafe, mark it for swsusp_free() */
SetPageNosave(virt_to_page(res));
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
allocated_unsafe_pages++;
res = (void *)get_zeroed_page(gfp_mask);
}
if (res) {
SetPageNosave(virt_to_page(res));
SetPageNosaveFree(virt_to_page(res));
}
return res;
}
unsigned long get_safe_page(gfp_t gfp_mask)
{
return (unsigned long)alloc_image_page(gfp_mask, PG_SAFE);
}
/**
* free_image_page - free page represented by @addr, allocated with
* alloc_image_page (page flags set by it must be cleared)
*/
static inline void free_image_page(void *addr, int clear_nosave_free)
{
ClearPageNosave(virt_to_page(addr));
if (clear_nosave_free)
ClearPageNosaveFree(virt_to_page(addr));
free_page((unsigned long)addr);
}
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
/* struct linked_page is used to build chains of pages */
#define LINKED_PAGE_DATA_SIZE (PAGE_SIZE - sizeof(void *))
struct linked_page {
struct linked_page *next;
char data[LINKED_PAGE_DATA_SIZE];
} __attribute__((packed));
static inline void
free_list_of_pages(struct linked_page *list, int clear_page_nosave)
{
while (list) {
struct linked_page *lp = list->next;
free_image_page(list, clear_page_nosave);
list = lp;
}
}
/**
* struct chain_allocator is used for allocating small objects out of
* a linked list of pages called 'the chain'.
*
* The chain grows each time when there is no room for a new object in
* the current page. The allocated objects cannot be freed individually.
* It is only possible to free them all at once, by freeing the entire
* chain.
*
* NOTE: The chain allocator may be inefficient if the allocated objects
* are not much smaller than PAGE_SIZE.
*/
struct chain_allocator {
struct linked_page *chain; /* the chain */
unsigned int used_space; /* total size of objects allocated out
* of the current page
*/
gfp_t gfp_mask; /* mask for allocating pages */
int safe_needed; /* if set, only "safe" pages are allocated */
};
static void
chain_init(struct chain_allocator *ca, gfp_t gfp_mask, int safe_needed)
{
ca->chain = NULL;
ca->used_space = LINKED_PAGE_DATA_SIZE;
ca->gfp_mask = gfp_mask;
ca->safe_needed = safe_needed;
}
static void *chain_alloc(struct chain_allocator *ca, unsigned int size)
{
void *ret;
if (LINKED_PAGE_DATA_SIZE - ca->used_space < size) {
struct linked_page *lp;
lp = alloc_image_page(ca->gfp_mask, ca->safe_needed);
if (!lp)
return NULL;
lp->next = ca->chain;
ca->chain = lp;
ca->used_space = 0;
}
ret = ca->chain->data + ca->used_space;
ca->used_space += size;
return ret;
}
static void chain_free(struct chain_allocator *ca, int clear_page_nosave)
{
free_list_of_pages(ca->chain, clear_page_nosave);
memset(ca, 0, sizeof(struct chain_allocator));
}
/**
* Data types related to memory bitmaps.
*
* Memory bitmap is a structure consiting of many linked lists of
* objects. The main list's elements are of type struct zone_bitmap
* and each of them corresonds to one zone. For each zone bitmap
* object there is a list of objects of type struct bm_block that
* represent each blocks of bit chunks in which information is
* stored.
*
* struct memory_bitmap contains a pointer to the main list of zone
* bitmap objects, a struct bm_position used for browsing the bitmap,
* and a pointer to the list of pages used for allocating all of the
* zone bitmap objects and bitmap block objects.
*
* NOTE: It has to be possible to lay out the bitmap in memory
* using only allocations of order 0. Additionally, the bitmap is
* designed to work with arbitrary number of zones (this is over the
* top for now, but let's avoid making unnecessary assumptions ;-).
*
* struct zone_bitmap contains a pointer to a list of bitmap block
* objects and a pointer to the bitmap block object that has been
* most recently used for setting bits. Additionally, it contains the
* pfns that correspond to the start and end of the represented zone.
*
* struct bm_block contains a pointer to the memory page in which
* information is stored (in the form of a block of bit chunks
* of type unsigned long each). It also contains the pfns that
* correspond to the start and end of the represented memory area and
* the number of bit chunks in the block.
*
* NOTE: Memory bitmaps are used for two types of operations only:
* "set a bit" and "find the next bit set". Moreover, the searching
* is always carried out after all of the "set a bit" operations
* on given bitmap.
*/
#define BM_END_OF_MAP (~0UL)
#define BM_CHUNKS_PER_BLOCK (PAGE_SIZE / sizeof(long))
#define BM_BITS_PER_CHUNK (sizeof(long) << 3)
#define BM_BITS_PER_BLOCK (PAGE_SIZE << 3)
struct bm_block {
struct bm_block *next; /* next element of the list */
unsigned long start_pfn; /* pfn represented by the first bit */
unsigned long end_pfn; /* pfn represented by the last bit plus 1 */
unsigned int size; /* number of bit chunks */
unsigned long *data; /* chunks of bits representing pages */
};
struct zone_bitmap {
struct zone_bitmap *next; /* next element of the list */
unsigned long start_pfn; /* minimal pfn in this zone */
unsigned long end_pfn; /* maximal pfn in this zone plus 1 */
struct bm_block *bm_blocks; /* list of bitmap blocks */
struct bm_block *cur_block; /* recently used bitmap block */
};
/* strcut bm_position is used for browsing memory bitmaps */
struct bm_position {
struct zone_bitmap *zone_bm;
struct bm_block *block;
int chunk;
int bit;
};
struct memory_bitmap {
struct zone_bitmap *zone_bm_list; /* list of zone bitmaps */
struct linked_page *p_list; /* list of pages used to store zone
* bitmap objects and bitmap block
* objects
*/
struct bm_position cur; /* most recently used bit position */
};
/* Functions that operate on memory bitmaps */
static inline void memory_bm_reset_chunk(struct memory_bitmap *bm)
{
bm->cur.chunk = 0;
bm->cur.bit = -1;
}
static void memory_bm_position_reset(struct memory_bitmap *bm)
{
struct zone_bitmap *zone_bm;
zone_bm = bm->zone_bm_list;
bm->cur.zone_bm = zone_bm;
bm->cur.block = zone_bm->bm_blocks;
memory_bm_reset_chunk(bm);
}
static void memory_bm_free(struct memory_bitmap *bm, int clear_nosave_free);
/**
* create_bm_block_list - create a list of block bitmap objects
*/
static inline struct bm_block *
create_bm_block_list(unsigned int nr_blocks, struct chain_allocator *ca)
{
struct bm_block *bblist = NULL;
while (nr_blocks-- > 0) {
struct bm_block *bb;
bb = chain_alloc(ca, sizeof(struct bm_block));
if (!bb)
return NULL;
bb->next = bblist;
bblist = bb;
}
return bblist;
}
/**
* create_zone_bm_list - create a list of zone bitmap objects
*/
static inline struct zone_bitmap *
create_zone_bm_list(unsigned int nr_zones, struct chain_allocator *ca)
{
struct zone_bitmap *zbmlist = NULL;
while (nr_zones-- > 0) {
struct zone_bitmap *zbm;
zbm = chain_alloc(ca, sizeof(struct zone_bitmap));
if (!zbm)
return NULL;
zbm->next = zbmlist;
zbmlist = zbm;
}
return zbmlist;
}
/**
* memory_bm_create - allocate memory for a memory bitmap
*/
static int
memory_bm_create(struct memory_bitmap *bm, gfp_t gfp_mask, int safe_needed)
{
struct chain_allocator ca;
struct zone *zone;
struct zone_bitmap *zone_bm;
struct bm_block *bb;
unsigned int nr;
chain_init(&ca, gfp_mask, safe_needed);
/* Compute the number of zones */
nr = 0;
for_each_zone (zone)
if (populated_zone(zone) && !is_highmem(zone))
nr++;
/* Allocate the list of zones bitmap objects */
zone_bm = create_zone_bm_list(nr, &ca);
bm->zone_bm_list = zone_bm;
if (!zone_bm) {
chain_free(&ca, PG_UNSAFE_CLEAR);
return -ENOMEM;
}
/* Initialize the zone bitmap objects */
for_each_zone (zone) {
unsigned long pfn;
if (!populated_zone(zone) || is_highmem(zone))
continue;
zone_bm->start_pfn = zone->zone_start_pfn;
zone_bm->end_pfn = zone->zone_start_pfn + zone->spanned_pages;
/* Allocate the list of bitmap block objects */
nr = DIV_ROUND_UP(zone->spanned_pages, BM_BITS_PER_BLOCK);
bb = create_bm_block_list(nr, &ca);
zone_bm->bm_blocks = bb;
zone_bm->cur_block = bb;
if (!bb)
goto Free;
nr = zone->spanned_pages;
pfn = zone->zone_start_pfn;
/* Initialize the bitmap block objects */
while (bb) {
unsigned long *ptr;
ptr = alloc_image_page(gfp_mask, safe_needed);
bb->data = ptr;
if (!ptr)
goto Free;
bb->start_pfn = pfn;
if (nr >= BM_BITS_PER_BLOCK) {
pfn += BM_BITS_PER_BLOCK;
bb->size = BM_CHUNKS_PER_BLOCK;
nr -= BM_BITS_PER_BLOCK;
} else {
/* This is executed only once in the loop */
pfn += nr;
bb->size = DIV_ROUND_UP(nr, BM_BITS_PER_CHUNK);
}
bb->end_pfn = pfn;
bb = bb->next;
}
zone_bm = zone_bm->next;
}
bm->p_list = ca.chain;
memory_bm_position_reset(bm);
return 0;
Free:
bm->p_list = ca.chain;
memory_bm_free(bm, PG_UNSAFE_CLEAR);
return -ENOMEM;
}
/**
* memory_bm_free - free memory occupied by the memory bitmap @bm
*/
static void memory_bm_free(struct memory_bitmap *bm, int clear_nosave_free)
{
struct zone_bitmap *zone_bm;
/* Free the list of bit blocks for each zone_bitmap object */
zone_bm = bm->zone_bm_list;
while (zone_bm) {
struct bm_block *bb;
bb = zone_bm->bm_blocks;
while (bb) {
if (bb->data)
free_image_page(bb->data, clear_nosave_free);
bb = bb->next;
}
zone_bm = zone_bm->next;
}
free_list_of_pages(bm->p_list, clear_nosave_free);
bm->zone_bm_list = NULL;
}
/**
* memory_bm_set_bit - set the bit in the bitmap @bm that corresponds
* to given pfn. The cur_zone_bm member of @bm and the cur_block member
* of @bm->cur_zone_bm are updated.
*
* If the bit cannot be set, the function returns -EINVAL .
*/
static int
memory_bm_set_bit(struct memory_bitmap *bm, unsigned long pfn)
{
struct zone_bitmap *zone_bm;
struct bm_block *bb;
/* Check if the pfn is from the current zone */
zone_bm = bm->cur.zone_bm;
if (pfn < zone_bm->start_pfn || pfn >= zone_bm->end_pfn) {
zone_bm = bm->zone_bm_list;
/* We don't assume that the zones are sorted by pfns */
while (pfn < zone_bm->start_pfn || pfn >= zone_bm->end_pfn) {
zone_bm = zone_bm->next;
if (unlikely(!zone_bm))
return -EINVAL;
}
bm->cur.zone_bm = zone_bm;
}
/* Check if the pfn corresponds to the current bitmap block */
bb = zone_bm->cur_block;
if (pfn < bb->start_pfn)
bb = zone_bm->bm_blocks;
while (pfn >= bb->end_pfn) {
bb = bb->next;
if (unlikely(!bb))
return -EINVAL;
}
zone_bm->cur_block = bb;
pfn -= bb->start_pfn;
set_bit(pfn % BM_BITS_PER_CHUNK, bb->data + pfn / BM_BITS_PER_CHUNK);
return 0;
}
/* Two auxiliary functions for memory_bm_next_pfn */
/* Find the first set bit in the given chunk, if there is one */
static inline int next_bit_in_chunk(int bit, unsigned long *chunk_p)
{
bit++;
while (bit < BM_BITS_PER_CHUNK) {
if (test_bit(bit, chunk_p))
return bit;
bit++;
}
return -1;
}
/* Find a chunk containing some bits set in given block of bits */
static inline int next_chunk_in_block(int n, struct bm_block *bb)
{
n++;
while (n < bb->size) {
if (bb->data[n])
return n;
n++;
}
return -1;
}
/**
* memory_bm_next_pfn - find the pfn that corresponds to the next set bit
* in the bitmap @bm. If the pfn cannot be found, BM_END_OF_MAP is
* returned.
*
* It is required to run memory_bm_position_reset() before the first call to
* this function.
*/
static unsigned long memory_bm_next_pfn(struct memory_bitmap *bm)
{
struct zone_bitmap *zone_bm;
struct bm_block *bb;
int chunk;
int bit;
do {
bb = bm->cur.block;
do {
chunk = bm->cur.chunk;
bit = bm->cur.bit;
do {
bit = next_bit_in_chunk(bit, bb->data + chunk);
if (bit >= 0)
goto Return_pfn;
chunk = next_chunk_in_block(chunk, bb);
bit = -1;
} while (chunk >= 0);
bb = bb->next;
bm->cur.block = bb;
memory_bm_reset_chunk(bm);
} while (bb);
zone_bm = bm->cur.zone_bm->next;
if (zone_bm) {
bm->cur.zone_bm = zone_bm;
bm->cur.block = zone_bm->bm_blocks;
memory_bm_reset_chunk(bm);
}
} while (zone_bm);
memory_bm_position_reset(bm);
return BM_END_OF_MAP;
Return_pfn:
bm->cur.chunk = chunk;
bm->cur.bit = bit;
return bb->start_pfn + chunk * BM_BITS_PER_CHUNK + bit;
}
/**
* snapshot_additional_pages - estimate the number of additional pages
* be needed for setting up the suspend image data structures for given
* zone (usually the returned value is greater than the exact number)
*/
unsigned int snapshot_additional_pages(struct zone *zone)
{
unsigned int res;
res = DIV_ROUND_UP(zone->spanned_pages, BM_BITS_PER_BLOCK);
res += DIV_ROUND_UP(res * sizeof(struct bm_block), PAGE_SIZE);
return res;
}
/**
* pfn_is_nosave - check if given pfn is in the 'nosave' section
*/
static inline int pfn_is_nosave(unsigned long pfn)
{
unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
}
/**
* saveable - Determine whether a page should be cloned or not.
* @pfn: The page
*
* We save a page if it isn't Nosave, and is not in the range of pages
* statically defined as 'unsaveable', and it
* isn't a part of a free chunk of pages.
*/
static struct page *saveable_page(unsigned long pfn)
{
struct page *page;
if (!pfn_valid(pfn))
return NULL;
page = pfn_to_page(pfn);
if (PageNosave(page))
return NULL;
if (PageReserved(page) && pfn_is_nosave(pfn))
return NULL;
if (PageNosaveFree(page))
return NULL;
return page;
}
unsigned int count_data_pages(void)
{
struct zone *zone;
unsigned long pfn, max_zone_pfn;
unsigned int n = 0;
for_each_zone (zone) {
if (is_highmem(zone))
continue;
mark_free_pages(zone);
max_zone_pfn = zone->zone_start_pfn + zone->spanned_pages;
for (pfn = zone->zone_start_pfn; pfn < max_zone_pfn; pfn++)
n += !!saveable_page(pfn);
}
return n;
}
static inline void copy_data_page(long *dst, long *src)
{
int n;
/* copy_page and memcpy are not usable for copying task structs. */
for (n = PAGE_SIZE / sizeof(long); n; n--)
*dst++ = *src++;
}
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
static void
copy_data_pages(struct memory_bitmap *copy_bm, struct memory_bitmap *orig_bm)
{
struct zone *zone;
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
unsigned long pfn;
for_each_zone (zone) {
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
unsigned long max_zone_pfn;
if (is_highmem(zone))
continue;
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
mark_free_pages(zone);
max_zone_pfn = zone->zone_start_pfn + zone->spanned_pages;
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
for (pfn = zone->zone_start_pfn; pfn < max_zone_pfn; pfn++)
if (saveable_page(pfn))
memory_bm_set_bit(orig_bm, pfn);
}
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
memory_bm_position_reset(orig_bm);
memory_bm_position_reset(copy_bm);
do {
pfn = memory_bm_next_pfn(orig_bm);
if (likely(pfn != BM_END_OF_MAP)) {
struct page *page;
void *src;
page = pfn_to_page(pfn);
src = page_address(page);
page = pfn_to_page(memory_bm_next_pfn(copy_bm));
copy_data_page(page_address(page), src);
}
} while (pfn != BM_END_OF_MAP);
}
/**
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
* swsusp_free - free pages allocated for the suspend.
*
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
* Suspend pages are alocated before the atomic copy is made, so we
* need to release them after the resume.
*/
void swsusp_free(void)
{
struct zone *zone;
unsigned long pfn, max_zone_pfn;
for_each_zone(zone) {
max_zone_pfn = zone->zone_start_pfn + zone->spanned_pages;
for (pfn = zone->zone_start_pfn; pfn < max_zone_pfn; pfn++)
if (pfn_valid(pfn)) {
struct page *page = pfn_to_page(pfn);
if (PageNosave(page) && PageNosaveFree(page)) {
ClearPageNosave(page);
ClearPageNosaveFree(page);
free_page((long) page_address(page));
}
}
}
nr_copy_pages = 0;
nr_meta_pages = 0;
restore_pblist = NULL;
buffer = NULL;
}
/**
* enough_free_mem - Make sure we enough free memory to snapshot.
*
* Returns TRUE or FALSE after checking the number of available
* free pages.
*/
static int enough_free_mem(unsigned int nr_pages)
{
struct zone *zone;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
unsigned int free = 0, meta = 0;
for_each_zone (zone)
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
if (!is_highmem(zone)) {
free += zone->free_pages;
meta += snapshot_additional_pages(zone);
}
pr_debug("swsusp: pages needed: %u + %u + %u, available pages: %u\n",
nr_pages, PAGES_FOR_IO, meta, free);
return free > nr_pages + PAGES_FOR_IO + meta;
}
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
static int
swsusp_alloc(struct memory_bitmap *orig_bm, struct memory_bitmap *copy_bm,
unsigned int nr_pages)
{
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
int error;
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
error = memory_bm_create(orig_bm, GFP_ATOMIC | __GFP_COLD, PG_ANY);
if (error)
goto Free;
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
error = memory_bm_create(copy_bm, GFP_ATOMIC | __GFP_COLD, PG_ANY);
if (error)
goto Free;
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
while (nr_pages-- > 0) {
struct page *page = alloc_page(GFP_ATOMIC | __GFP_COLD);
if (!page)
goto Free;
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
SetPageNosave(page);
SetPageNosaveFree(page);
memory_bm_set_bit(copy_bm, page_to_pfn(page));
}
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
return 0;
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
Free:
swsusp_free();
return -ENOMEM;
}
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
/* Memory bitmap used for marking saveable pages */
static struct memory_bitmap orig_bm;
/* Memory bitmap used for marking allocated pages that will contain the copies
* of saveable pages
*/
static struct memory_bitmap copy_bm;
asmlinkage int swsusp_save(void)
{
unsigned int nr_pages;
pr_debug("swsusp: critical section: \n");
drain_local_pages();
nr_pages = count_data_pages();
printk("swsusp: Need to copy %u pages\n", nr_pages);
if (!enough_free_mem(nr_pages)) {
printk(KERN_ERR "swsusp: Not enough free memory\n");
return -ENOMEM;
}
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
if (swsusp_alloc(&orig_bm, &copy_bm, nr_pages))
return -ENOMEM;
/* During allocating of suspend pagedir, new cold pages may appear.
* Kill them.
*/
drain_local_pages();
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
copy_data_pages(&copy_bm, &orig_bm);
/*
* End of critical section. From now on, we can write to memory,
* but we should not touch disk. This specially means we must _not_
* touch swap space! Except we must write out our image of course.
*/
nr_copy_pages = nr_pages;
nr_meta_pages = (nr_pages * sizeof(long) + PAGE_SIZE - 1) >> PAGE_SHIFT;
printk("swsusp: critical section/: done (%d pages copied)\n", nr_pages);
return 0;
}
static void init_header(struct swsusp_info *info)
{
memset(info, 0, sizeof(struct swsusp_info));
info->version_code = LINUX_VERSION_CODE;
info->num_physpages = num_physpages;
memcpy(&info->uts, &system_utsname, sizeof(system_utsname));
info->cpus = num_online_cpus();
info->image_pages = nr_copy_pages;
info->pages = nr_copy_pages + nr_meta_pages + 1;
info->size = info->pages;
info->size <<= PAGE_SHIFT;
}
/**
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
* pack_pfns - pfns corresponding to the set bits found in the bitmap @bm
* are stored in the array @buf[] (1 page at a time)
*/
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
static inline void
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
pack_pfns(unsigned long *buf, struct memory_bitmap *bm)
{
int j;
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
for (j = 0; j < PAGE_SIZE / sizeof(long); j++) {
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
buf[j] = memory_bm_next_pfn(bm);
if (unlikely(buf[j] == BM_END_OF_MAP))
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
break;
}
}
/**
* snapshot_read_next - used for reading the system memory snapshot.
*
* On the first call to it @handle should point to a zeroed
* snapshot_handle structure. The structure gets updated and a pointer
* to it should be passed to this function every next time.
*
* The @count parameter should contain the number of bytes the caller
* wants to read from the snapshot. It must not be zero.
*
* On success the function returns a positive number. Then, the caller
* is allowed to read up to the returned number of bytes from the memory
* location computed by the data_of() macro. The number returned
* may be smaller than @count, but this only happens if the read would
* cross a page boundary otherwise.
*
* The function returns 0 to indicate the end of data stream condition,
* and a negative number is returned on error. In such cases the
* structure pointed to by @handle is not updated and should not be used
* any more.
*/
int snapshot_read_next(struct snapshot_handle *handle, size_t count)
{
if (handle->cur > nr_meta_pages + nr_copy_pages)
return 0;
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
if (!buffer) {
/* This makes the buffer be freed by swsusp_free() */
buffer = alloc_image_page(GFP_ATOMIC, PG_ANY);
if (!buffer)
return -ENOMEM;
}
if (!handle->offset) {
init_header((struct swsusp_info *)buffer);
handle->buffer = buffer;
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
memory_bm_position_reset(&orig_bm);
memory_bm_position_reset(&copy_bm);
}
if (handle->prev < handle->cur) {
if (handle->cur <= nr_meta_pages) {
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
memset(buffer, 0, PAGE_SIZE);
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
pack_pfns(buffer, &orig_bm);
} else {
[PATCH] swsusp: Introduce memory bitmaps Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:54 +08:00
unsigned long pfn = memory_bm_next_pfn(&copy_bm);
handle->buffer = page_address(pfn_to_page(pfn));
}
handle->prev = handle->cur;
}
handle->buf_offset = handle->cur_offset;
if (handle->cur_offset + count >= PAGE_SIZE) {
count = PAGE_SIZE - handle->cur_offset;
handle->cur_offset = 0;
handle->cur++;
} else {
handle->cur_offset += count;
}
handle->offset += count;
return count;
}
/**
* mark_unsafe_pages - mark the pages that cannot be used for storing
* the image during resume, because they conflict with the pages that
* had been used before suspend
*/
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
static int mark_unsafe_pages(struct memory_bitmap *bm)
{
struct zone *zone;
unsigned long pfn, max_zone_pfn;
/* Clear page flags */
for_each_zone (zone) {
max_zone_pfn = zone->zone_start_pfn + zone->spanned_pages;
for (pfn = zone->zone_start_pfn; pfn < max_zone_pfn; pfn++)
if (pfn_valid(pfn))
ClearPageNosaveFree(pfn_to_page(pfn));
}
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
/* Mark pages that correspond to the "original" pfns as "unsafe" */
memory_bm_position_reset(bm);
do {
pfn = memory_bm_next_pfn(bm);
if (likely(pfn != BM_END_OF_MAP)) {
if (likely(pfn_valid(pfn)))
SetPageNosaveFree(pfn_to_page(pfn));
else
return -EFAULT;
}
} while (pfn != BM_END_OF_MAP);
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
allocated_unsafe_pages = 0;
return 0;
}
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
static void
duplicate_memory_bitmap(struct memory_bitmap *dst, struct memory_bitmap *src)
{
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
unsigned long pfn;
memory_bm_position_reset(src);
pfn = memory_bm_next_pfn(src);
while (pfn != BM_END_OF_MAP) {
memory_bm_set_bit(dst, pfn);
pfn = memory_bm_next_pfn(src);
}
}
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
static inline int check_header(struct swsusp_info *info)
{
char *reason = NULL;
if (info->version_code != LINUX_VERSION_CODE)
reason = "kernel version";
if (info->num_physpages != num_physpages)
reason = "memory size";
if (strcmp(info->uts.sysname,system_utsname.sysname))
reason = "system type";
if (strcmp(info->uts.release,system_utsname.release))
reason = "kernel release";
if (strcmp(info->uts.version,system_utsname.version))
reason = "version";
if (strcmp(info->uts.machine,system_utsname.machine))
reason = "machine";
if (reason) {
printk(KERN_ERR "swsusp: Resume mismatch: %s\n", reason);
return -EPERM;
}
return 0;
}
/**
* load header - check the image header and copy data from it
*/
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
static int
load_header(struct swsusp_info *info)
{
int error;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
restore_pblist = NULL;
error = check_header(info);
if (!error) {
nr_copy_pages = info->image_pages;
nr_meta_pages = info->pages - info->image_pages - 1;
}
return error;
}
/**
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
* unpack_orig_pfns - for each element of @buf[] (1 page at a time) set
* the corresponding bit in the memory bitmap @bm
*/
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
static inline void
unpack_orig_pfns(unsigned long *buf, struct memory_bitmap *bm)
{
int j;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
for (j = 0; j < PAGE_SIZE / sizeof(long); j++) {
if (unlikely(buf[j] == BM_END_OF_MAP))
break;
memory_bm_set_bit(bm, buf[j]);
}
}
/**
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
* prepare_image - use the memory bitmap @bm to mark the pages that will
* be overwritten in the process of restoring the system memory state
* from the suspend image ("unsafe" pages) and allocate memory for the
* image.
*
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
* The idea is to allocate a new memory bitmap first and then allocate
* as many pages as needed for the image data, but not to assign these
* pages to specific tasks initially. Instead, we just mark them as
* allocated and create a list of "safe" pages that will be used later.
*/
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
#define PBES_PER_LINKED_PAGE (LINKED_PAGE_DATA_SIZE / sizeof(struct pbe))
static struct linked_page *safe_pages_list;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
static int
prepare_image(struct memory_bitmap *new_bm, struct memory_bitmap *bm)
{
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
unsigned int nr_pages;
struct linked_page *sp_list, *lp;
int error;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
error = mark_unsafe_pages(bm);
if (error)
goto Free;
error = memory_bm_create(new_bm, GFP_ATOMIC, PG_SAFE);
if (error)
goto Free;
duplicate_memory_bitmap(new_bm, bm);
memory_bm_free(bm, PG_UNSAFE_KEEP);
/* Reserve some safe pages for potential later use.
*
* NOTE: This way we make sure there will be enough safe pages for the
* chain_alloc() in get_buffer(). It is a bit wasteful, but
* nr_copy_pages cannot be greater than 50% of the memory anyway.
*/
sp_list = NULL;
/* nr_copy_pages cannot be lesser than allocated_unsafe_pages */
nr_pages = nr_copy_pages - allocated_unsafe_pages;
nr_pages = DIV_ROUND_UP(nr_pages, PBES_PER_LINKED_PAGE);
while (nr_pages > 0) {
lp = alloc_image_page(GFP_ATOMIC, PG_SAFE);
if (!lp) {
error = -ENOMEM;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
goto Free;
}
lp->next = sp_list;
sp_list = lp;
nr_pages--;
}
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
/* Preallocate memory for the image */
safe_pages_list = NULL;
nr_pages = nr_copy_pages - allocated_unsafe_pages;
while (nr_pages > 0) {
lp = (struct linked_page *)get_zeroed_page(GFP_ATOMIC);
if (!lp) {
error = -ENOMEM;
goto Free;
}
if (!PageNosaveFree(virt_to_page(lp))) {
/* The page is "safe", add it to the list */
lp->next = safe_pages_list;
safe_pages_list = lp;
}
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
/* Mark the page as allocated */
SetPageNosave(virt_to_page(lp));
SetPageNosaveFree(virt_to_page(lp));
nr_pages--;
}
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
/* Free the reserved safe pages so that chain_alloc() can use them */
while (sp_list) {
lp = sp_list->next;
free_image_page(sp_list, PG_UNSAFE_CLEAR);
sp_list = lp;
}
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
return 0;
Free:
swsusp_free();
return error;
}
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
/**
* get_buffer - compute the address that snapshot_write_next() should
* set for its caller to write to.
*/
static void *get_buffer(struct memory_bitmap *bm, struct chain_allocator *ca)
{
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
struct pbe *pbe;
struct page *page = pfn_to_page(memory_bm_next_pfn(bm));
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
if (PageNosave(page) && PageNosaveFree(page))
/* We have allocated the "original" page frame and we can
* use it directly to store the loaded page.
*/
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
return page_address(page);
/* The "original" page frame has not been allocated and we have to
* use a "safe" page frame to store the loaded page.
*/
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
pbe = chain_alloc(ca, sizeof(struct pbe));
if (!pbe) {
swsusp_free();
return NULL;
}
pbe->orig_address = (unsigned long)page_address(page);
pbe->address = (unsigned long)safe_pages_list;
safe_pages_list = safe_pages_list->next;
pbe->next = restore_pblist;
restore_pblist = pbe;
return (void *)pbe->address;
}
/**
* snapshot_write_next - used for writing the system memory snapshot.
*
* On the first call to it @handle should point to a zeroed
* snapshot_handle structure. The structure gets updated and a pointer
* to it should be passed to this function every next time.
*
* The @count parameter should contain the number of bytes the caller
* wants to write to the image. It must not be zero.
*
* On success the function returns a positive number. Then, the caller
* is allowed to write up to the returned number of bytes to the memory
* location computed by the data_of() macro. The number returned
* may be smaller than @count, but this only happens if the write would
* cross a page boundary otherwise.
*
* The function returns 0 to indicate the "end of file" condition,
* and a negative number is returned on error. In such cases the
* structure pointed to by @handle is not updated and should not be used
* any more.
*/
int snapshot_write_next(struct snapshot_handle *handle, size_t count)
{
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
static struct chain_allocator ca;
int error = 0;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
/* Check if we have already loaded the entire image */
if (handle->prev && handle->cur > nr_meta_pages + nr_copy_pages)
return 0;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
if (!buffer) {
/* This makes the buffer be freed by swsusp_free() */
buffer = alloc_image_page(GFP_ATOMIC, PG_ANY);
if (!buffer)
return -ENOMEM;
}
if (!handle->offset)
handle->buffer = buffer;
handle->sync_read = 1;
if (handle->prev < handle->cur) {
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
if (handle->prev == 0) {
error = load_header(buffer);
if (error)
return error;
error = memory_bm_create(&copy_bm, GFP_ATOMIC, PG_ANY);
if (error)
return error;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
} else if (handle->prev <= nr_meta_pages) {
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
unpack_orig_pfns(buffer, &copy_bm);
if (handle->prev == nr_meta_pages) {
error = prepare_image(&orig_bm, &copy_bm);
if (error)
return error;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
chain_init(&ca, GFP_ATOMIC, PG_SAFE);
memory_bm_position_reset(&orig_bm);
restore_pblist = NULL;
handle->buffer = get_buffer(&orig_bm, &ca);
handle->sync_read = 0;
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
if (!handle->buffer)
return -ENOMEM;
}
} else {
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
handle->buffer = get_buffer(&orig_bm, &ca);
handle->sync_read = 0;
}
handle->prev = handle->cur;
}
handle->buf_offset = handle->cur_offset;
if (handle->cur_offset + count >= PAGE_SIZE) {
count = PAGE_SIZE - handle->cur_offset;
handle->cur_offset = 0;
handle->cur++;
} else {
handle->cur_offset += count;
}
handle->offset += count;
return count;
}
int snapshot_image_loaded(struct snapshot_handle *handle)
{
[PATCH] swsusp: Use memory bitmaps during resume Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:32:55 +08:00
return !(!nr_copy_pages ||
handle->cur <= nr_meta_pages + nr_copy_pages);
}
void snapshot_free_unused_memory(struct snapshot_handle *handle)
{
/* Free only if we have loaded the image entirely */
if (handle->prev && handle->cur > nr_meta_pages + nr_copy_pages)
memory_bm_free(&orig_bm, PG_UNSAFE_CLEAR);
}