p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/usb/core/hcd.h

492 lines
16 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Copyright (c) 2001-2002 by David Brownell
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifdef __KERNEL__
USB: mutual exclusion for EHCI init and port resets This patch (as999) fixes a problem that sometimes shows up when host controller driver modules are loaded in the wrong order. If ehci-hcd happens to initialize an EHCI controller while the companion OHCI or UHCI controller is in the middle of a port reset, the reset can fail and the companion may get very confused. The patch adds an rw-semaphore and uses it to keep EHCI initialization and port resets mutually exclusive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: David Miller <davem@davemloft.net> Cc: Dely L Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-11 04:27:07 +08:00
#include <linux/rwsem.h>
usb: hub: add check for unsupported bus topology We can't allow hubs on the 7th tier as they would allow devices on the 8th tier. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-12 15:49:47 +08:00
#define MAX_TOPO_LEVEL 6
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* This file contains declarations of usbcore internals that are mostly
* used or exposed by Host Controller Drivers.
*/
/*
* USB Packet IDs (PIDs)
*/
USB: defines for USB "Link Power Management" (LPM) ECN There's a new PM-related change notice for the USB 2.0 specification called "Link Power Management" (LPM). It defines a new "L1 Suspend" state which resembles the current (L2) suspend state, except that it can be entered and exited much more quickly. It should thus be more useful for runtime PM, even though it doesn't mandate reduced power draw from VBUS. This patch provides the relevant #defines for usbcore. Actually implementing these mechanisms requires host silicon that can generate new USB packets, plus hubs handling some new requests and peripherals which understand the new packets. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-11 04:24:00 +08:00
#define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define USB_PID_OUT 0xe1
#define USB_PID_ACK 0xd2
#define USB_PID_DATA0 0xc3
#define USB_PID_PING 0xb4 /* USB 2.0 */
#define USB_PID_SOF 0xa5
#define USB_PID_NYET 0x96 /* USB 2.0 */
#define USB_PID_DATA2 0x87 /* USB 2.0 */
#define USB_PID_SPLIT 0x78 /* USB 2.0 */
#define USB_PID_IN 0x69
#define USB_PID_NAK 0x5a
#define USB_PID_DATA1 0x4b
#define USB_PID_PREAMBLE 0x3c /* Token mode */
#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
#define USB_PID_SETUP 0x2d
#define USB_PID_STALL 0x1e
#define USB_PID_MDATA 0x0f /* USB 2.0 */
/*-------------------------------------------------------------------------*/
/*
* USB Host Controller Driver (usb_hcd) framework
*
* Since "struct usb_bus" is so thin, you can't share much code in it.
* This framework is a layer over that, and should be more sharable.
usb: add the concept of default authorization to USB hosts This introduces /sys/bus/devices/usb*/authorized_default; it dictates what is going to be the default authorization state for devices connected to the host. User space can set that using the sysfs file. We hook to the root hub instead of to the device controller as it is quite easy to get to it in sysfs from the device structure (device 5-4.3 is usb5) vs. backtracking to the controller device. By default it is set to be 'authorized' (!0) for normal, wired USB devices and 'unauthorized' (0) for Wireless USB devices. As suggested by Adrian Bunk, make authorized_default static Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-01 11:33:58 +08:00
*
* @authorized_default: Specifies if new devices are authorized to
* connect by default or they require explicit
* user space authorization; this bit is settable
* through /sys/class/usb_host/X/authorized_default.
* For the rest is RO, so we don't lock to r/w it.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
/*-------------------------------------------------------------------------*/
usbcore: trim down usb_bus structure As part of the ongoing program to flatten out the HCD bus-glue layer, this patch (as771b) eliminates the hcpriv, release, and kref fields from struct usb_bus. hcpriv and release were not being used for anything worthwhile, and kref has been moved into the enclosing usb_hcd structure. Along with those changes, the patch gets rid of usb_bus_get and usb_bus_put, replacing them with usb_get_hcd and usb_put_hcd. The one interesting aspect is that the dev_set_drvdata call was removed from usb_put_hcd, where it clearly doesn't belong. This means the driver private data won't get reset to NULL. It shouldn't cause any problems, since the private data is undefined when no driver is bound. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 23:32:52 +08:00
struct usb_hcd {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* housekeeping
*/
struct usb_bus self; /* hcd is-a bus */
usbcore: trim down usb_bus structure As part of the ongoing program to flatten out the HCD bus-glue layer, this patch (as771b) eliminates the hcpriv, release, and kref fields from struct usb_bus. hcpriv and release were not being used for anything worthwhile, and kref has been moved into the enclosing usb_hcd structure. Along with those changes, the patch gets rid of usb_bus_get and usb_bus_put, replacing them with usb_get_hcd and usb_put_hcd. The one interesting aspect is that the dev_set_drvdata call was removed from usb_put_hcd, where it clearly doesn't belong. This means the driver private data won't get reset to NULL. It shouldn't cause any problems, since the private data is undefined when no driver is bound. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 23:32:52 +08:00
struct kref kref; /* reference counter */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
const char *product_desc; /* product/vendor string */
char irq_descr[24]; /* driver + bus # */
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 03:56:37 +08:00
struct timer_list rh_timer; /* drives root-hub polling */
struct urb *status_urb; /* the current status urb */
USB: separate autosuspend from external suspend This patch (as866) adds new entry points for external USB device suspend and resume requests, as opposed to internally-generated autosuspend or autoresume. It also changes the existing remote-wakeup code paths to use the new routines, since remote wakeup is not the same as autoresume. As part of the change, it turns out to be necessary to do remote wakeup of root hubs from a workqueue. We had been using khubd, but it does autoresume rather than an external resume. Using the ksuspend_usb_wq workqueue for this purpose seemed a logical choice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-14 04:37:30 +08:00
#ifdef CONFIG_PM
struct work_struct wakeup_work; /* for remote wakeup */
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* hardware info/state
*/
const struct hc_driver *driver; /* hw-specific hooks */
[PATCH] USB: Fix USB suspend/resume crasher (#2) This patch closes the IRQ race and makes various other OHCI & EHCI code path safer vs. suspend/resume. I've been able to (finally !) successfully suspend and resume various Mac models, with or without USB mouse plugged, or plugging while asleep, or unplugging while asleep etc... all without a crash. Alan, please verify the UHCI bit I did, I only verified that it builds. It's very simple so I wouldn't expect any issue there. If you aren't confident, then just drop the hunks that change uhci-hcd.c I also made the patch a little bit more "safer" by making sure the store to the interrupt register that disables interrupts is not posted before I set the flag and drop the spinlock. Without this patch, you cannot reliably sleep/wakeup any recent Mac, and I suspect PCs have some more sneaky issues too (they don't frankly crash with machine checks because x86 tend to silently swallow PCI errors but that won't last afaik, at least PCI Express will blow up in those situations, but the USB code may still misbehave). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-25 06:59:46 +08:00
/* Flags that need to be manipulated atomically */
unsigned long flags;
#define HCD_FLAG_HW_ACCESSIBLE 0x00000001
#define HCD_FLAG_SAW_IRQ 0x00000002
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned rh_registered:1;/* is root hub registered? */
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 03:56:37 +08:00
/* The next flag is a stopgap, to be removed when all the HCDs
* support the new root-hub polling mechanism. */
unsigned uses_new_polling:1;
unsigned poll_rh:1; /* poll for rh status? */
unsigned poll_pending:1; /* status has changed? */
wusb: hub code recognizes wusb ports This patch enables the USB stack to recognize WUSB devices (from a WUSB HCD) and assigns them the proper speed setting (USB_SPEED_VARIABLE). 1. Introduce usb_hcd->wireless to mark a host controller instance as being wireless, and thus having wireless 'fake' ports. [discarded previous model of using a reserved bit in the port_stat struct to do this; thanks to Alan Stern for indicating the proper way to do it]. 2. Introduce hub.c:hub_is_wusb() that tests if a hub is a WUSB root hub (WUSB doesn't have non-root hubs). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-26 10:35:29 +08:00
unsigned wireless:1; /* Wireless USB HCD */
usb: add the concept of default authorization to USB hosts This introduces /sys/bus/devices/usb*/authorized_default; it dictates what is going to be the default authorization state for devices connected to the host. User space can set that using the sysfs file. We hook to the root hub instead of to the device controller as it is quite easy to get to it in sysfs from the device structure (device 5-4.3 is usb5) vs. backtracking to the controller device. By default it is set to be 'authorized' (!0) for normal, wired USB devices and 'unauthorized' (0) for Wireless USB devices. As suggested by Adrian Bunk, make authorized_default static Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-01 11:33:58 +08:00
unsigned authorized_default:1;
USB: root hubs don't lie about their number of TTs Currently EHCI root hubs enumerate with a bDeviceProtocol code indicating that they possess a Transaction Translator. However the vast majority of controllers do not; they rely on a companion controller to handle full- and low-speed communications. This patch (as1064) changes the root-hub device descriptor to match the actual situation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-04 06:02:56 +08:00
unsigned has_tt:1; /* Integrated TT in root hub */
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 03:56:37 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */
u64 rsrc_start; /* memory/io resource start */
u64 rsrc_len; /* memory/io resource length */
[PATCH] usbcore: Remove hub_set_power_budget This patch removes the hub_set_power_budget routine, which was used by a couple of HCDs to indicate that the root hub was running on battery power. In its place is a new field added to struct usb_hcd, which HCDs can set before the root hub is registered. Special-case code in the hub driver knows to look at this field when configuring a root hub. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-25 23:18:32 +08:00
unsigned power_budget; /* in mA, 0 = no limit */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define HCD_BUFFER_POOLS 4
struct dma_pool *pool [HCD_BUFFER_POOLS];
int state;
# define __ACTIVE 0x01
# define __SUSPEND 0x04
# define __TRANSIENT 0x80
# define HC_STATE_HALT 0
# define HC_STATE_RUNNING (__ACTIVE)
# define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
# define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
# define HC_STATE_SUSPENDED (__SUSPEND)
#define HC_IS_RUNNING(state) ((state) & __ACTIVE)
#define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
/* more shared queuing code would be good; it should support
* smarter scheduling, handle transaction translators, etc;
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
* input size of periodic table to an interrupt scheduler.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* (ohci 32, uhci 1024, ehci 256/512/1024).
*/
/* The HC driver's private data is stored at the end of
* this structure.
*/
unsigned long hcd_priv[0]
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
__attribute__ ((aligned(sizeof(unsigned long))));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
/* 2.4 does this a bit differently ... */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
return &hcd->self;
}
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
usbcore: trim down usb_bus structure As part of the ongoing program to flatten out the HCD bus-glue layer, this patch (as771b) eliminates the hcpriv, release, and kref fields from struct usb_bus. hcpriv and release were not being used for anything worthwhile, and kref has been moved into the enclosing usb_hcd structure. Along with those changes, the patch gets rid of usb_bus_get and usb_bus_put, replacing them with usb_get_hcd and usb_put_hcd. The one interesting aspect is that the dev_set_drvdata call was removed from usb_put_hcd, where it clearly doesn't belong. This means the driver private data won't get reset to NULL. It shouldn't cause any problems, since the private data is undefined when no driver is bound. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 23:32:52 +08:00
{
return container_of(bus, struct usb_hcd, self);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct hcd_timeout { /* timeouts we allocate */
struct list_head timeout_list;
struct timer_list timer;
};
/*-------------------------------------------------------------------------*/
struct hc_driver {
const char *description; /* "ehci-hcd" etc */
const char *product_desc; /* product/vendor string */
size_t hcd_priv_size; /* size of private data */
/* irq handler */
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
irqreturn_t (*irq) (struct usb_hcd *hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int flags;
#define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 14:58:35 +08:00
#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define HCD_USB11 0x0010 /* USB 1.1 */
#define HCD_USB2 0x0020 /* USB 2.0 */
/* called to init HCD and root hub */
int (*reset) (struct usb_hcd *hcd);
int (*start) (struct usb_hcd *hcd);
/* NOTE: these suspend/resume calls relate to the HC as
[PATCH] usbcore PCI glue updates for PM This updates the PCI glue to address the new and simplified usbcore suspend semantics, where CONFIG_USB_SUSPEND becomes irrelevant to HCDs because hcd->hub_suspend() will always be called. - Removes now-unneeded recursion support - Go back to ignoring faults reported by the wakeup calls; we expect them to fail sometimes, and that's just fine. The PCI HCDs will need simple changes to catch up to this, like being able to ignore the setting of CONFIG_USB_SUSPEND. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd-pci.c | 106 +++++++++++++++++++++------------------------ drivers/usb/core/hcd.h | 6 +- 2 files changed, 53 insertions(+), 59 deletions(-)
2005-09-23 13:38:16 +08:00
* a whole, not just the root hub; they're for PCI bus glue.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[PATCH] usbcore PCI glue updates for PM This updates the PCI glue to address the new and simplified usbcore suspend semantics, where CONFIG_USB_SUSPEND becomes irrelevant to HCDs because hcd->hub_suspend() will always be called. - Removes now-unneeded recursion support - Go back to ignoring faults reported by the wakeup calls; we expect them to fail sometimes, and that's just fine. The PCI HCDs will need simple changes to catch up to this, like being able to ignore the setting of CONFIG_USB_SUSPEND. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd-pci.c | 106 +++++++++++++++++++++------------------------ drivers/usb/core/hcd.h | 6 +- 2 files changed, 53 insertions(+), 59 deletions(-)
2005-09-23 13:38:16 +08:00
/* called after suspending the hub, before entering D3 etc */
USB: clarify usage of hcd->suspend/resume methods The .suspend and .resume method pointers in struct usb_hcd have not been fully understood by host-controller driver writers. They are meant for use with PCI controllers; other platform-specific drivers generally should not refer to them. To try and clarify matters, this patch (as1065) renames those methods to .pci_suspend and .pci_resume. It eliminates corresponding dead code and bogus references in the ohci-ssb and u132-hcd drivers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-04 06:03:06 +08:00
int (*pci_suspend) (struct usb_hcd *hcd, pm_message_t message);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] usbcore PCI glue updates for PM This updates the PCI glue to address the new and simplified usbcore suspend semantics, where CONFIG_USB_SUSPEND becomes irrelevant to HCDs because hcd->hub_suspend() will always be called. - Removes now-unneeded recursion support - Go back to ignoring faults reported by the wakeup calls; we expect them to fail sometimes, and that's just fine. The PCI HCDs will need simple changes to catch up to this, like being able to ignore the setting of CONFIG_USB_SUSPEND. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd-pci.c | 106 +++++++++++++++++++++------------------------ drivers/usb/core/hcd.h | 6 +- 2 files changed, 53 insertions(+), 59 deletions(-)
2005-09-23 13:38:16 +08:00
/* called after entering D0 (etc), before resuming the hub */
USB: clarify usage of hcd->suspend/resume methods The .suspend and .resume method pointers in struct usb_hcd have not been fully understood by host-controller driver writers. They are meant for use with PCI controllers; other platform-specific drivers generally should not refer to them. To try and clarify matters, this patch (as1065) renames those methods to .pci_suspend and .pci_resume. It eliminates corresponding dead code and bogus references in the ohci-ssb and u132-hcd drivers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-04 06:03:06 +08:00
int (*pci_resume) (struct usb_hcd *hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* cleanly make HCD stop writing memory and doing I/O */
void (*stop) (struct usb_hcd *hcd);
USB: Properly unregister reboot notifier in case of failure in ehci hcd If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-09 08:24:08 +08:00
/* shutdown HCD */
void (*shutdown) (struct usb_hcd *hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* return current frame number */
int (*get_frame_number) (struct usb_hcd *hcd);
/* manage i/o requests, device state */
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 23:48:02 +08:00
int (*urb_enqueue)(struct usb_hcd *hcd,
struct urb *urb, gfp_t mem_flags);
int (*urb_dequeue)(struct usb_hcd *hcd,
struct urb *urb, int status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* hw synch, freeing endpoint resources that urb_dequeue can't */
void (*endpoint_disable)(struct usb_hcd *hcd,
struct usb_host_endpoint *ep);
/* root hub support */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
int (*hub_control) (struct usb_hcd *hcd,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
int (*bus_suspend)(struct usb_hcd *);
int (*bus_resume)(struct usb_hcd *);
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
USB: force handover port to companion when hub_port_connect_change fails This patch hands over the port to the companion when the hub_port_connect_change fails. Signed-off-by: Balaji Rao <balajirrao@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-22 04:28:14 +08:00
/* force handover of high-speed port to full-speed companion */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
void (*relinquish_port)(struct usb_hcd *, int);
USB: EHCI: suppress unwanted error messages This patch (as1096) fixes an annoying problem: When a full-speed or low-speed device is plugged into an EHCI controller, it fails to enumerate at high speed and then is handed over to the companion controller. But usbcore logs a misleading and unwanted error message when the high-speed enumeration fails. The patch adds a new HCD method, port_handed_over, which asks whether a port has been handed over to a companion controller. If it has, the error message is suppressed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-21 04:58:29 +08:00
/* has a port been handed over to a companion? */
int (*port_handed_over)(struct usb_hcd *, int);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 23:48:02 +08:00
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
int status);
extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
extern int usb_hcd_unlink_urb(struct urb *urb, int status);
USB: Eliminate urb->status usage! This patch (as979) removes the last vestiges of urb->status from the host controller drivers and the root-hub emulator. Now the field doesn't get set until just before the URB's completion routine is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-25 03:42:24 +08:00
extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
int status);
USB: break apart flush_endpoint and disable_endpoint This patch (as988) breaks usb_hcd_endpoint_disable() apart into two routines. The first, usb_hcd_flush_endpoint() does the -ESHUTDOWN unlinking of all URBs in the endpoint's queue and waits for them to complete. The second, usb_hcd_disable_endpoint() -- renamed for better grammatical style -- merely calls the HCD's endpoint_disable method. The changeover is easy because the routine currently has only one caller. This separation of function will be exploited in the following patch: When a device is suspended, the core will be able to cancel all outstanding URBs for that device while leaving the HCD's endpoint-related data structures intact for later. As an added benefit, HCDs no longer need to check for existing URBs in their endpoint_disable methods. It is now guaranteed that there will be none. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-10 23:33:05 +08:00
extern void usb_hcd_flush_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
extern void usb_hcd_disable_endpoint(struct usb_device *udev,
USB: remove struct usb_operations All of the currently-supported USB host controller drivers use the HCD bus-glue framework. As part of the program for flattening out the glue layer, this patch (as769) removes the usb_operations structure. All function calls now go directly to the HCD routines (slightly renamed to remain within the "usb_" namespace). The patch also removes usb_alloc_bus(), because it's not useful in the HCD framework and it wasn't referenced anywhere. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 23:27:36 +08:00
struct usb_host_endpoint *ep);
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern int usb_hcd_get_frame_number(struct usb_device *udev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
USB: handle pci_name() being const This changes usb_create_hcd() to be able to handle the fact that pci_name() has changed to a constant string. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03 03:46:22 +08:00
struct device *dev, const char *bus_name);
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
extern void usb_put_hcd(struct usb_hcd *hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern int usb_add_hcd(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags);
extern void usb_remove_hcd(struct usb_hcd *hcd);
USB: Properly unregister reboot notifier in case of failure in ehci hcd If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-09 08:24:08 +08:00
struct platform_device;
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern void usb_hcd_platform_shutdown(struct platform_device *dev);
USB: Properly unregister reboot notifier in case of failure in ehci hcd If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-09 08:24:08 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_PCI
struct pci_dev;
struct pci_device_id;
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern int usb_hcd_pci_probe(struct pci_dev *dev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
const struct pci_device_id *id);
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern void usb_hcd_pci_remove(struct pci_dev *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_PM
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t state);
extern int usb_hcd_pci_resume(struct pci_dev *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* CONFIG_PM */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
USB: Properly unregister reboot notifier in case of failure in ehci hcd If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-09 08:24:08 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* CONFIG_PCI */
/* pci-ish (pdev null is ok) buffer alloc/mapping support */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
int hcd_buffer_create(struct usb_hcd *hcd);
void hcd_buffer_destroy(struct usb_hcd *hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
[PATCH] gfp_t: drivers/usb Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-21 15:21:58 +08:00
gfp_t mem_flags, dma_addr_t *dma);
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
void hcd_buffer_free(struct usb_bus *bus, size_t size,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
void *addr, dma_addr_t dma);
/* generic bus glue, needed for host controllers that don't use PCI */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 03:56:37 +08:00
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern void usb_hc_died(struct usb_hcd *hcd);
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 03:56:37 +08:00
extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* -------------------------------------------------------------------------- */
/* Enumeration is only for the hub driver, or HCD virtual root hubs */
extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
struct usb_bus *, unsigned port);
extern int usb_new_device(struct usb_device *dev);
extern void usb_disconnect(struct usb_device **);
extern int usb_get_configuration(struct usb_device *dev);
extern void usb_destroy_configuration(struct usb_device *dev);
/*-------------------------------------------------------------------------*/
/*
* HCD Root Hub support
*/
#include "hub.h"
/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
#define DeviceRequest \
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
#define DeviceOutRequest \
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
#define InterfaceRequest \
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
#define EndpointRequest \
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
#define EndpointOutRequest \
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
/* class requests from the USB 2.0 hub spec, table 11-15 */
/* GetBusState and SetHubDescriptor are optional, omitted */
#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE)
#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR)
#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS)
#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS)
#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE)
#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE)
/*-------------------------------------------------------------------------*/
/*
* Generic bandwidth allocation constants/support
*/
#define FRAME_TIME_USECS 1000L
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Trying not to use worst-case bit-stuffing
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
* of (7/6 * 8 * bytecount) = 9.33 * bytecount */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* bytecount = data payload byte count */
#define NS_TO_US(ns) ((ns + 500L) / 1000L)
/* convert & round nanoseconds to microseconds */
/*
* Full/low speed bandwidth allocation constants/support.
*/
#define BW_HOST_DELAY 1000L /* nanoseconds */
#define BW_HUB_LS_SETUP 333L /* nanoseconds */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
/* 4 full-speed bit times (est.) */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
#define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
#define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
/*
[PATCH] USB: fix in usb_calc_bus_time This patch does the same swap, i.e. use the ISO macro if (isoc). Additionally, it fixes the return value - the usb_calc_bus_time function returns the time in nanoseconds (I didn't notice that before) while the HS_USECS and HS_USECS_ISO are microseconds. This fixes the function to return nanoseconds always, and adjusts ehci-q.c (the only high-speed caller of the function) to wrap the call in NS_TO_US(). Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-30 03:18:28 +08:00
* Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
* to preallocate bandwidth)
*/
#define USB2_HOST_DELAY 5 /* nsec, guess */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
#define HS_NSECS(bytes) (((55 * 8 * 2083) \
[PATCH] USB: tweak highspeed timing calculations Use a more correct calculation for highspeed bit times. http://bugzilla.kernel.org/show_bug.cgi?id=3604 This sort if thing might start to make a difference now that the high speed periodic scheduler is more complete -- and even getting used. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-12 10:37:01 +08:00
+ (2083UL * (3 + BitTime(bytes))))/1000 \
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
+ USB2_HOST_DELAY)
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
[PATCH] USB: tweak highspeed timing calculations Use a more correct calculation for highspeed bit times. http://bugzilla.kernel.org/show_bug.cgi?id=3604 This sort if thing might start to make a difference now that the high speed periodic scheduler is more complete -- and even getting used. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-12 10:37:01 +08:00
+ (2083UL * (3 + BitTime(bytes))))/1000 \
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
+ USB2_HOST_DELAY)
[PATCH] USB: fix in usb_calc_bus_time This patch does the same swap, i.e. use the ISO macro if (isoc). Additionally, it fixes the return value - the usb_calc_bus_time function returns the time in nanoseconds (I didn't notice that before) while the HS_USECS and HS_USECS_ISO are microseconds. This fixes the function to return nanoseconds always, and adjusts ehci-q.c (the only high-speed caller of the function) to wrap the call in NS_TO_US(). Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-30 03:18:28 +08:00
#define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes))
#define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern long usb_calc_bus_time(int speed, int is_input,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int isoc, int bytecount);
/*-------------------------------------------------------------------------*/
extern void usb_set_device_state(struct usb_device *udev,
enum usb_device_state new_state);
/*-------------------------------------------------------------------------*/
/* exported only within usbcore */
extern struct list_head usb_bus_list;
[PATCH] USB: convert a bunch of USB semaphores to mutexes the patch below converts a bunch of semaphores-used-as-mutex in the USB code to mutexes Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-11 22:55:29 +08:00
extern struct mutex usb_bus_list_lock;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern wait_queue_head_t usb_kill_urb_queue;
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern int usb_find_interface_driver(struct usb_device *dev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct usb_interface *interface);
#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 05:08:02 +08:00
#ifdef CONFIG_PM
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
extern void usb_root_hub_lost_power(struct usb_device *rhdev);
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 03:34:36 +08:00
extern int hcd_bus_suspend(struct usb_device *rhdev);
extern int hcd_bus_resume(struct usb_device *rhdev);
[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 05:08:02 +08:00
#else
[PATCH] USB: fix pm patches with CONFIG_PM off part 1 With CONFIG_PM=n: drivers/built-in.o(.text+0x2a69c): In function `ohci_hub_control': drivers/usb/host/ohci-hub.c:539: undefined reference to `.usb_hcd_resume_root_hub' drivers/built-in.o(.text+0x2b920): In function `ohci_irq': drivers/usb/host/ohci-hcd.c:726: undefined reference to `.usb_hcd_resume_root_hub' Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-24 14:04:25 +08:00
static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
{
return;
}
[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 05:08:02 +08:00
#endif /* CONFIG_PM */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* USB device fs stuff
*/
#ifdef CONFIG_USB_DEVICEFS
/*
* these are expected to be called from the USB core/hub thread
* with the kernel lock held
*/
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
extern void usbfs_update_special(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern int usbfs_init(void);
extern void usbfs_cleanup(void);
#else /* CONFIG_USB_DEVICEFS */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
static inline void usbfs_update_special(void) {}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static inline int usbfs_init(void) { return 0; }
static inline void usbfs_cleanup(void) { }
#endif /* CONFIG_USB_DEVICEFS */
/*-------------------------------------------------------------------------*/
[PATCH] better USB_MON dependencies This makes the USB_MON less confusing. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 17:36:56 +08:00
#if defined(CONFIG_USB_MON)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct usb_mon_operations {
void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
USB: reorganize urb->status use in usbmon This patch (as978) reorganizes the way usbmon uses urb->status. It now accepts the status value as an argument. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-25 03:41:41 +08:00
void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
};
extern struct usb_mon_operations *mon_ops;
static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
{
if (bus->monitored)
(*mon_ops->urb_submit)(bus, urb);
}
static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
int error)
{
if (bus->monitored)
(*mon_ops->urb_submit_error)(bus, urb, error);
}
USB: reorganize urb->status use in usbmon This patch (as978) reorganizes the way usbmon uses urb->status. It now accepts the status value as an argument. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-25 03:41:41 +08:00
static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
int status)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
if (bus->monitored)
USB: reorganize urb->status use in usbmon This patch (as978) reorganizes the way usbmon uses urb->status. It now accepts the status value as an argument. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-25 03:41:41 +08:00
(*mon_ops->urb_complete)(bus, urb, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
int usb_mon_register(struct usb_mon_operations *ops);
void usb_mon_deregister(void);
#else
static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
int error) {}
USB: reorganize urb->status use in usbmon This patch (as978) reorganizes the way usbmon uses urb->status. It now accepts the status value as an argument. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-25 03:41:41 +08:00
static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
int status) {}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* CONFIG_USB_MON */
/*-------------------------------------------------------------------------*/
/* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
/* bleech -- resurfaced in 2.4.11 or 2.4.12 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define bitmap DeviceRemovable
/*-------------------------------------------------------------------------*/
/* random stuff */
USB: fix codingstyle issues in drivers/usb/core/*.h Fixes a number of coding style issues in the USB internal header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31 07:21:33 +08:00
#define RUN_CONTEXT (in_irq() ? "in_irq" \
: (in_interrupt() ? "in_interrupt" : "can sleep"))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: mutual exclusion for EHCI init and port resets This patch (as999) fixes a problem that sometimes shows up when host controller driver modules are loaded in the wrong order. If ehci-hcd happens to initialize an EHCI controller while the companion OHCI or UHCI controller is in the middle of a port reset, the reset can fail and the companion may get very confused. The patch adds an rw-semaphore and uses it to keep EHCI initialization and port resets mutually exclusive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: David Miller <davem@davemloft.net> Cc: Dely L Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-11 04:27:07 +08:00
/* This rwsem is for use only by the hub driver and ehci-hcd.
* Nobody else should touch it.
*/
extern struct rw_semaphore ehci_cf_port_reset_rwsem;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: EHCI: log a warning if ehci-hcd is not loaded first This patch (as1139) adds a warning to the system log whenever ehci-hcd is loaded after ohci-hcd or uhci-hcd. Nowadays most distributions are pretty good about not doing this; maybe the warning will help convince anyone still doing it wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 23:48:13 +08:00
/* Keep track of which host controller drivers are loaded */
#define USB_UHCI_LOADED 0
#define USB_OHCI_LOADED 1
#define USB_EHCI_LOADED 2
extern unsigned long usb_hcds_loaded;
USB: mutual exclusion for EHCI init and port resets This patch (as999) fixes a problem that sometimes shows up when host controller driver modules are loaded in the wrong order. If ehci-hcd happens to initialize an EHCI controller while the companion OHCI or UHCI controller is in the middle of a port reset, the reset can fail and the companion may get very confused. The patch adds an rw-semaphore and uses it to keep EHCI initialization and port resets mutually exclusive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: David Miller <davem@davemloft.net> Cc: Dely L Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-11 04:27:07 +08:00
#endif /* __KERNEL__ */